Hanwha Techwin SEW3040W Wireless Baby Monitor User Manual Part 2

Download:
Mirror Download [FCC.gov]
Document ID	2294846
Application ID	uHRp4p1oEdgk/L+esyZ6SA==
Document Description	User Manual Part 2
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	144.34kB (1804218 bits)
Date Submitted	2014-06-13 00:00:00
Date Available	2014-06-13 00:00:00
Creation Date	2014-05-27 14:10:57
Producing Software	Microsoft® Word 2010
Document Lastmod	2014-05-28 14:38:59
Document Title	User Manual Part 2
Document Creator	Microsoft® Word 2010
Document Author:	n

Viewing Mode Display
f Monitor Speaker Mute
Indicator Description
Indicates the monitor speaker is muted. Once the monitor’s speaker is muted,
no sound from the camera is produced.
How to use the indicator
a b cd
e Digital Clock
Displays the time that is set on the monitor. It only provides AM / PM time
format and no 24hour format.
g VOX On
fg h i
Indicates the Power / VOX slide switch position is set at “VOX” mode.
h Battery Capacity Level
Indicates remaining battery charge. Indicated in 4 levels, and one discharge
warning.
i Charging
Indicates the battery is charging by DC input power. If battery nearly empty,
it will flash to alert user to charge up the unit.
No Signal Warnings
a Signal Indicator
The signal indicator shows the strength of the signal being received from the
camera.
The number of bars in the signal indicator shows the strength of the signal –
One or no bars indicate the signal is poor, and 5 bars indicate a strong signal.
SEW-3036W
b Camera Number
Indicates which camera is being displayed on the current screen. Press the [+]
button on the monitor to switch between available cameras. When scan mode is
selected, this icon will flash.
c x2 Zoom mode
Indicates that current screen is Zoomed in. Use the four directional buttons to
pan the camera. Press the [
] button or x1 in the Menu bar to zoom back out.
d Night Vision Indicator
Indicates camera night vision mode is turned on.
The screen will appear in Black/White in this mode.
8 · Viewing Mode Display
The "Out of Range" message means the monitor cannot access the camera.
Please reposition the camera, or check the camera power.
SEW-3036W
Menu Operation
How to use the setup buttons
SEW-3036W
Press the [MENU] button of the monitor to display the menu screen.
Use [$/%/_/+] button to traverse the menu, and press [
] button to apply the
changes.
SEW-3036W
SEW-3036W
SEW-3036W
►
►
►
Enter menu Move to a Adjust level
setting
menu
Save the
change
1.
Press [MENU] button to enter the menu setting or exit the menu setting.
2.
Move to other menu by press [_] or [+] button.
3.
Adjust option level by [$] or [%] button.
4.
Press [
nn ``
] button to save and complete.
If no action more than 20sec, it will be time out back to monitor mode with save.
You can register a wireless camera with the monitor using the registration menu
where you can view the video of the selected wireless camera.
d Zoom
Zoom in on the current image (2x).
If you are using multiple cameras, you can set the zoom for each camera.
e Camera Select/Scan Mode
f Set Camera Speaker Volume
Adjust the volume of the speaker on the camera in this menu. The volume can be
adjusted from 1 to 5, with 5 being the loudest setting and 1 being the quietest.
g Time Setting
ab c d e fgh
a Brightness
Adjusts the brightness of the image shown. If you are using multiple camera,
you can adjust the brightness of each individual camera.
Set the time shown on the monitor. Use the [_] or [+] button to select a field.
Use the [$] or [%] button to change the numbers in the selected field.
h reset
Viewing Mode Display
Set which camera is being currently viewed. Each time a different camera is
selected, the Brightness, VOX Sensitivity Level, Camera Speaker Volume, and
Zoom settings will be saved to that specific camera.
If “SCAN” mode is selected, each of the registered cameras will be viewed in
ascending order at 10 second intervals. If one or more cameras are turned off
or out of range, the monitor will show the “Out of Range” indicator for the 10
seconds for that particular camera.
03
How to use the setup icon
c Pairing
Choose  to reset the monitor to factory defaults. All settings including
time and paring information will be set to the factory defaults.
b Camera VOX Sensitivity
If not in “VOX” mode, “OFF” is displayed and not to be selected.
In VOX mode, you can select “H” (High) or “L” (Low). If set to “H”, monitor can
be triggered by lower audio level than “L” setting.
English · 9

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.7
Linearized                      : Yes
Author                          : n
Create Date                     : 2014:05:27 14:10:57+09:00
Modify Date                     : 2014:05:28 14:38:59+09:00
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Metadata Date                   : 2014:05:28 14:38:59+09:00
Creator Tool                    : Microsoft® Word 2010
Format                          : application/pdf
Creator                         : n
Document ID                     : uuid:688189b0-18f3-45cf-8951-2ff0e8a1ab33
Instance ID                     : uuid:a6baffa3-4f74-40c9-8aaa-995d415d15b2
Producer                        : Microsoft® Word 2010
Page Count                      : 2

EXIF Metadata provided by EXIF.tools