Hanwha Techwin SSA-R1101V RFID Reader User Manual 20101004 v1 Appen
Samsung Techwin Co Ltd RFID Reader 20101004 v1 Appen
User manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 1355632 |
| Application ID | 9vgc5jBb4TrQb0GESApAkA== |
| Document Description | User manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 25.4kB (317491 bits) |
| Date Submitted | 2010-10-07 00:00:00 |
| Date Available | 2010-10-07 00:00:00 |
| Creation Date | 2010-10-07 17:57:01 |
| Producing Software | Acrobat Distiller 5.0.5 (Windows) |
| Document Lastmod | 2010-10-07 17:57:01 |
| Document Title | User Manual_20101004_v1 - Appen.PDF |
| Document Creator | PScript5.dll Version 5.2 |
| Document Author: | ltsai |
RFID Reader User Manual SSA-R1001V SSA-R1101V RFID Reader User Manual Copyright ©2010 Samsung Techwin Co., Ltd. All rights reserved. Trademark is the registered logo of Samsung Techwin Co., Ltd. The name of this product is the registered trademark of Samsung Techwin Co., Ltd. Other trademarks mentioned in this manual are the registered trademark of their respective company. Restriction Samsung Techwin Co., Ltd shall reserve the copyright of this document. Under no circumstances, this document shall be reproduced, distributed or changed, partially or wholly, without formal authorization of Samsung Techwin. Disclaimer Samsung Techwin makes the best to verify the integrity and correctness of the contents in this document, but no formal guarantee shall be provided. Use of this document and the subsequent results shall be entirely on the user’s own responsibility. Samsung Techwin reserves the right to change the contents of this document without prior notice. Warranty If the product does not operate properly in normal conditions, please let us know. Samsung Techwin will resolve the problem for free of charge. The warranty period is 3 years. However, the followings are excluded: • If the system behaves abnormally because you run a program irrelevant to the system operation. • Deteriorated performance or natural worn-out in process of time • Sensory phenomenon that does not affect the performance or quality of the product (ex : working noise) safety information CAUTION RISK OF ELECTRIC SHOCK. DO NOT OPEN This symbol indicates that dangerous voltage consisting a risk of electric shock is present within this unit. This exclamation point symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. WARNING • To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. WARNING 1. Be sure to use only the standard adapter that is specified in the specification sheet. Using any other adapter could cause fire, electrical shock, or damage to the product. 2. Incorrectly connecting the power supply or replacing battery may cause explosion, fire, electric shock, or damage to the product. 3. Do not connect multiple controllers to a single adapter. Exceeding the capacity may cause abnormal heat generation or fire. 4. Securely plug the power cord into the power receptacle. Insecure connection may cause fire. 5. When installing the controller, fasten it securely and firmly. The fall of controller may cause personal injury. 6. Do not place conductive objects (e.g. screwdrivers, coins, metal parts, etc.) or containers filled with water on top of the controller. Doing so may cause personal injury due to fire, electric shock, or falling objects. 7. Do not install the unit in humid, dusty, or sooty locations. Doing so may cause fire or electric shock. 8. If any unusual smells or smoke come from the unit, stop using the product. In such case, immediately disconnect the power source and contact the service center. Continued use in such a condition may cause fire or electric shock. 9. If this product fails to operate normally, contact the nearest service center. Never disassemble or modify this product in any way. (SAMSUNG is not liable for problems caused by unauthorized modifications or attempted repair.) 10.. When cleaning, do not spray water directly onto parts of the product. Doing so may cause fire or electric shock. CAUTION 1. Do not drop objects on the product or apply strong blows to it. Keep away from a location subject to excessive vibration or magnetic interference. 2. Do not install in a location subject to high temperature (over 50°C), low temperature (below -25°C), or high humidity. Doing so may cause fire or electric shock. 3. If you want to relocate the already installed product, be sure to turn off the power and then move or reinstall it. 4. Remove the power plug from the outlet when there is a lighting storm. Neglecting to do so may cause fire or damage to the product. 5. Keep out of direct sunlight and heat radiation sources. It may cause fire. 6. Install it in a place with good ventilation. 7. Avoid aiming the controller directly towards extremely bright objects such as sun. 8. Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus. 9. The Mains plug is used as a disconnect device and shall stay readily operable at any time. English _ 3 SAFETY INFORMATION CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. safety information FCC Statement Caution : Any changes or modifications in construction of this device which are not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) This device may not cause harmful interference, and 2) This device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, any cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. IMPORTANT SAFETY INSTRUCTIONS 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8. Do not install near any heat sources such as radiators, heat registers, or other apparatus (including amplifiers) that produce heat. 9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11. Only use attachments/accessories specified by the manufacturer. 12. Use only with cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. 13. Unplug this apparatus when a card is used. Use caution when moving the cart/ apparatus combination to avoid injury from tip-over. 14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as powersupply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. 4_ safety information contents Features What’s included At a Glance Cable Color Scheme Cable Selection INSTALLATION AND EXTERNAL CONNECTION 10 11 Installation Precautions on installation External Connection INITIALIZATION 12 Basic Operations OUTPUT FORMAT 13 14 WIEGAND Output RS-232 Output TROUBLESHOOTING 15 Troubleshooting PRODUCT SPECIFICATIONS 16 Product Specifications 12 13 CONTENTS PRODUCT INTRODUCTION 15 16 English _ 5 product introduction FEATURES This model is an elegant-looking proximity reader that can be easily attached to a metal doorframe or the wall. Featured by the epoxy adhesion and aluminium case, R1001V/R1101V is shock-resistant with a high level of weather-proofing in any challenging weather conditions. The red and green indicators as well as the Piezo buzzer guarantee a stable and proper operation for you. ◆ 13.56 MHz [MIFARE] Contactless Smart Card Reader ◆ Compatible with ISO14443 Type A ◆ 3 Array LED Indicators (red and green) and Built-in Buzzer ◆ 34 bit Wiegand / RS-232 Data Output ◆ Control of External LED Indicators ◆ Control of External Buzzer ◆ Epoxy adhesion and aluminium case ◆ Reverse Polarity Protection ◆ Weatherproof and Dustproof WHAT’S INCLUDED Check if the following items are included in the product package. What’s included in SSA-R1001V RFID Reader user manual SSA-R1001V SSA-R1101V SSA-R1001V SSA-R1001V Bezel READER Module 3mm Hex Wrench (x1) 3.5x40mm screws (x2) 3.5x25mm screws (x2) 6x30mm Plastic Anchor (x2) Quick Guide CD Manual What’s included in SSA-R1101V RFID Reader user manual SSA-R1101V Bezel READER Module 6_ product introduction 3mm Hex Wrench (x1) 3.5x40mm screws (x2) 3.5x25mm screws (x2) 6x30mm Plastic Anchor (x2) SSA-R1001V SSA-R1101V Quick Guide CD Manual AT A GLANCE Front/Rear PRODUCT INTRODUCTION LED Displays the system operation status using red and green indicators. Buzzer Piezo buzzer. Connection Cable Used to connect to the power or I/O cable. Fixing Hole Fixing hole for wall-mounting. Tamper Switch A tamper switch to detect falling from the wall. English _ 7 product introduction CABLE COLOR SCHEME Item Cable Color Signal Line Description Red DC +12V DC +12V supplied Black GND Earth-grounding for power Blue Buzzer Control BUZZER Control Input Port Yellow LED Control LED Control Input Port Green Out Wiegand 0 Wiegand Data 0 Output Port White Out Wiegand 1 Wiegand Data 1 Output Port Purple RS-232(TX) RS-232 Transmission Output Port Pink Tamper Output (COM) Tamper Output Port Light yellow Tamper Output (NC) Tamper Output Port NC Not Connected Power Input Output Communication Tamper Gray Brown Not used Orange CABLE SELECTION Item Power (DC12V) WIEGAND Output Buzzer Control LED Control Tamper Output RS-232 Cable 8_ product introduction Cable Type Belden #9409, 18 AWG 2 Conductor, Unshielded Belden #9512, 22 AWG 4 Conductor, Shielded Belden #9514, 22 AWG 8 Conductor, Shielded Belden #9829, 24 AWG 2-twisted pair, Shielded installation and external connection INSTALLATION - Inserted in the doorframe / attached to the wall 2. Insert the reader cables to the midway hole and fix the reader module with two 6-32 or M3 screws. 3. Insert the reader module into the appearance case and tighten the screw (M6x8mm) using the hex wrench. Upper 6-32 hole 1.7” (4.31cm) 3.3” (8.38cm) 6-32 or M3 Screws 6-32 or M3 Screws 1/2”hole 6-32 hole Gang Box Lower Reader Module Reader Module Bezel 3mm Hex Wrench Wall Mount Mullion Mount Bezel 3mm Hex Wrench Electric Gang Box Mount English _ 9 INSTALLATION AND EXTERNAL CONNECTION 1. Two 6-32 or M3 holes are 3.3” (8.38 cm) away from each other vertically; between the two exists one 1/2” hole through which the reader cables are arranged. The midway hole is located 1.7” (4.31cm) down from the upper hole. (If the product is already installed, you can skip the follow step) installation and external connection PRECAUTIONS ON INSTALLATION If installing on a metal wall If you install the reader on a metal wall, the read range may be reduced. To avoid this problem, it is recommended to insert the spacer between the metal wall and the reader as shown below. Metal Wall Spacer Reader If installing more than one reader side by side or front and back If you install more than one reader side by side or front and back, the read range may be reduced. In this case, if you present a card to one reader, the other reader may recognize the same card, meaning two readers read the same card simultaneously. To avoid this problem, keep at least 20 cm of space between the two readers. Minimum 20cm #Reader 1 Minimum 20cm #Reader 2 #Reader 1 #Reader 210_ installation and external connection EXTERNAL CONNECTION Wiring Diagram SSA-R1001V/SSA-R1101V CONTROLLER LED Control In Yellow Wiegand Data 0 Out Green Wiegand Data 1 Out White Tamper Output(COM) Tamper Output(NC) RS-232(TX) Brown RS-232(GND) Black INSTALLATION AND EXTERNAL CONNECTION Blue Buzzer Control In PC Pink Light yellow Red Black DC +12V GND POWER Item Cable Wiring Connect the DC+12V to the red line. Power Supply Unit Connect GND to the black line. Connect the green line of the product to the Wiegand D0 input port of the controller. Wiegand Connection Connect the white line of the product to the Wiegand D1 input port of the controller. LED Control To control the LED indicators, connect the yellow line to the output port (relay) of the controller. Buzzer Control To control the built-in buzzer, connect the blue line to the output port (relay) of the controller. RS-232 Connection Connect to the COM port of the PC. (Connect pin 2 of the DB-9 connector to the purple line; connect the black line of the device (GND) to pin 5 of the DB-9 connector) Connect the pink line of the product to the GND terminal of the controller. Tamper Connection Connect the light yellow wire of the product to the GND terminal of the controller. English _ 11 initialization BASIC OPERATIONS Initial State (when the power is supplied) When you apply power to the reader, it will sound a beep before entering Standby with the red indicator turn on . Using the card Present the card to the reader until you hear a beep and the red indicator turns green. When the reader has transferred the data to the controller, it returns to Standby with the red indicator turned on and waits for reading the next card. ar i lzj lzj zzhTzYWWW LED Control You can control the LED indicator of the device at your preference. Connect the LED control input line (yellow) to the NO port of the controller relay output, and GND to the COM port. Set the I/O of the controller so that you can change the color of the LED indicators. While the LED control is working, the green indicator stays solid. This function not only enables you to change the color representing Standby from red to green, but it can be also applied to make various modifications according to the different I/O settings of the controller. For more information about the I/O settings of the controller, refer to the user manual of the controller. Buzzer Control You can control the buzzer of the device at your preference. You can configure the I/O settings of the controller so that it sounds a beep. While the buzzer control is working, the product keeps sounding the beep. The controller can use the I/O settings to set the buzzer control so that it sounds an additional beep for authorized or unauthorized access upon user authentication. Furthermore, you can make various modifications according to the different I/O settings of the controller. For more information about the I/O settings of the controller, refer to the user manual of the controller. Card reading is not available while the buzzer control is sounding the buzzer. 12_ initialization output format WIEGAND OUTPUT Timing Diagram 5V 1ms DATA-0 0V 5V DATA-1 LOGIC n-2 n-1 0V *n : 34 Data Type • Bit 1 : Even Parity (bit2~bit17) • Bit2~Bit33 : 4 byte ID number • Bit34 : Odd Parity (bit18~bit33) English _ 13 OUTPUT FORMAT 100us output format RS-232 OUTPUT Output Waveform MSB LSB +15V Space(=0) +3V Indeterminate Region 0V -3V Mark(=1) 8 Data Bits -15V 2 Stop Bits Start Bit Data packet corresponding to ASCII character ‘A’ Data Type Start (0X02H) Data (10 Char) End (0x03H) LRC START(0X02H) DATA (10 Char) END (0x03H) LRC Check the following settings: Baud Rate : 9600bps DataBit : 8 Parity : None Stop Bit : 1 LRC: This is the result of XOR operation of each byte from Start to End. 14_ output format troubleshooting TROUBLESHOOTING If the product does not function properly, please see the below for trouble shooting. PROBLEM SOLUTION 1) 2) When I turn on the product, it sounds a beep with dimly turned on indicator. 1) Check the rated voltage specified in the user manual and the catalog. Ensure that you are using an ISO14443 Type A card. - Cards of 125 kHz format can not be used. 13.56 MHz cards of Type B, ISO15693 format can not be used. (Contact the card retailer regarding the card format.) 3) If the problem persists, contact the nearest customer service for your assistance. 2) 3) The read range (R/R) of the card differs each time the product reads the card. 1) 2) Ensure that you are using a larger-capacity adaptor than specified in the user manual or the catalog, which should cover the rated current consumption of the reader. If you are using multiple readers that are connected to one adaptor, make sure that the adaptor should be large enough to cover the current consumption multiplied by the reader count. Even with a large adaptor enough to supply adequate power, if the power cable is not a dedicated line (such as communication line or UPT cable), or if it’s so long to cause power loss, you’d better replace it with a dedicated line or reinforce it. If the problem persists, contact the nearest customer service for your assistance. The characteristics of a card are determined by the nature of the coils used and in the manufacturing process engaged by the card manufacturer. So what you do first is to check that the cards in use are made by the same manufacturer. If you are using cards from different card makers, the read range (R/R) differs by the card, which is the result of normal operation. If you encounter a different read range (R/R) for each card that is made by the same manufacturer, please contact the nearest customer service. English _ 15 TROUBLE SHOOTING My card is not read properly. product specifications PRODUCT SPECIFICATIONS Item SSA-R1001V SSA-R1101V Power / Current DC 12V / Max.80mA Reading Time (Card) 30ms Input Port 2ea : External LED Control, External Buzzer Control Output Port 34bit Wiegand LED Indicator 2 Color LED (Red and Green) Beeper Piezo Buzzer Operating Temperature -25°C to +50°C Operating Humidity 10% to 90% Relative Humidity Non-Condensing Color / Material Silver with Black/Polycarbonate & Aluminum Die casting Dimension (W x H x D(mm)) 47.0 x 120 .0 x 26.0 75.0 x 120.0 x 26.0 Weight 250g ±10 340g ±10 Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in the European Union and other European countries with separate collection systems) This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger, headset, USB cable) should not be disposed of with other household waste at the end of their working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate these items from other types of waste and recycle them responsibly to promote the sustainable reuse of material resources. Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take these items for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract. This product and its electronic accessories should not be mixed with other commercial wastes for disposal. Correct disposal of batteries in this product (Applicable in the European Union and other European countries with separate battery return systems.) This marking on the battery, manual or packaging indicates that the batteries in this product should not be disposed of with other household waste at the end of their working life. Where marked, the chemical symbols Hg, Cd or Pb indicate that the battery contains mercury, cadmium or lead above the reference levels in EC Directive 2006/66. If batteries are not properly disposed of, these substances can cause harm to human health or the environment. To protect natural resources and to promote material reuse, please separate batteries from other types of waste and recycle them through your local, free battery return system. 16_ product specifications SALES NETWORK SAMSUNG TECHWIN CO., LTD. Samsungtechwin R&D Center, 701, Sampyeong-dong, Bundang-gu, Seongnam-si, Gyeonggi-do, Korea, 463-400 TEL : +82-70-7147-8740~60 FAX : +82-31-8018-3745 SAMSUNG TECHWIN AMERICA Inc. 1480 Charles Willard St, Carson, CA 90746, UNITED STATES Tol Free : +1-877-213-1222 FAX : +1-310-632-2195 www.samsungcctvusa.com www.samsungsecurity.com www.samsungtechwin.com SAMSUNG TECHWIN EUROPE LTD. Samsung House, 1000 Hillswood Drive, Hillswood Business Park Chertsey, Surrey, UNITED KINGDOM KT16 OPS TEL : +44-1932-45-5300 FAX : +44-1932-45-5325 P/No. : Z8100239401A
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : Yes Create Date : 2010:10:07 17:57:01-07:00 Modify Date : 2010:10:07 17:57:01-07:00 Page Count : 17 Creation Date : 2010:10:08 00:57:01Z Mod Date : 2010:10:08 00:57:01Z Producer : Acrobat Distiller 5.0.5 (Windows) Author : ltsai Metadata Date : 2010:10:08 00:57:01Z Creator : ltsai Title : User Manual_20101004_v1 - Appen.PDFEXIF Metadata provided by EXIF.tools