| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 1355679 |
| Application ID | ycVAYSG2/yaNICl3YljWMQ== |
| Document Description | User manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 283.02kB (3537722 bits) |
| Date Submitted | 2010-10-07 00:00:00 |
| Date Available | 2010-10-07 00:00:00 |
| Creation Date | 2010-09-27 13:04:13 |
| Producing Software | Acrobat Distiller 7.0 (Windows) |
| Document Lastmod | 2010-09-27 13:04:13 |
| Document Title | Z8100239101A-SSA-R2001V-ENG-100927.indd |
| Document Creator | PScript5.dll Version 5.2 |
| Document Author: | Administrator |
RFID Reader
User Manual
SSA-R2001V
RFID Reader
User Manual
Copyright
©2010 Samsung Techwin Co., Ltd. All rights reserved.
Trademark
is the registered logo of Samsung Techwin Co., Ltd.
The name of this product is the registered trademark of Samsung Techwin Co., Ltd.
Other trademarks mentioned in this manual are the registered trademark of their respective company.
Restriction
Samsung Techwin Co., Ltd shall reserve the copyright of this document. Under no circumstances, this document shall be reproduced, distributed or changed, partially or wholly, without formal authorization of Samsung
Techwin.
Disclaimer
Samsung Techwin makes the best to verify the integrity and correctness of the contents in this document, but
no formal guarantee shall be provided. Use of this document and the subsequent results shall be entirely on the
user’s own responsibility. Samsung Techwin reserves the right to change the contents of this document without
prior notice.
Warranty
If the product does not operate properly in normal conditions, please let us know. Samsung Techwin will resolve
the problem for free of charge. The warranty period is 3 years. However, the followings are excluded:
• If the system behaves abnormally because you run a program irrelevant to the system operation.
• Deteriorated performance or natural worn-out in process of time
• Sensory phenomenon that does not affect the performance or quality of the product (ex : working noise)
safety information
CAUTION
RISK OF ELECTRIC SHOCK.
DO NOT OPEN
This symbol indicates that dangerous voltage consisting a risk of electric shock is
present within this unit.
This exclamation point symbol is intended to alert the user to the presence of
important operating and maintenance (servicing) instructions in the literature
accompanying the appliance.
WARNING
• To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.
WARNING
1. Be sure to use only the standard adapter that is specified in the specification sheet.
Using any other adapter could cause fire, electrical shock, or damage to the product.
2. Incorrectly connecting the power supply or replacing battery may cause explosion, fire, electric shock, or damage to
the product.
3. Do not connect multiple controllers to a single adapter. Exceeding the capacity may cause abnormal heat generation or fire.
4. Securely plug the power cord into the power receptacle. Insecure connection may cause fire.
5. When installing the controller, fasten it securely and firmly. The fall of controller may cause personal injury.
6. Do not place conductive objects (e.g. screwdrivers, coins, metal parts, etc.) or containers filled with water on top of the
controller. Doing so may cause personal injury due to fire, electric shock, or falling objects.
7. Do not install the unit in humid, dusty, or sooty locations. Doing so may cause fire or electric shock.
8. If any unusual smells or smoke come from the unit, stop using the product. In such case, immediately disconnect the
power source and contact the service center. Continued use in such a condition may cause fire or electric shock.
9. If this product fails to operate normally, contact the nearest service center. Never disassemble or modify this product in
any way. (SAMSUNG is not liable for problems caused by unauthorized modifications or attempted repair.)
10.. When cleaning, do not spray water directly onto parts of the product. Doing so may cause fire or electric shock.
CAUTION
1. Do not drop objects on the product or apply strong blows to it. Keep away from a location subject to excessive
vibration or magnetic interference.
2. Do not install in a location subject to high temperature (over 50°C), low temperature (below -25°C), or high humidity.
Doing so may cause fire or electric shock.
3. If you want to relocate the already installed product, be sure to turn off the power and then move or reinstall it.
4. Remove the power plug from the outlet when there is a lighting storm. Neglecting to do so may cause fire or damage
to the product.
5. Keep out of direct sunlight and heat radiation sources. It may cause fire.
6. Install it in a place with good ventilation.
7. Avoid aiming the controller directly towards extremely bright objects such as sun.
8. Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be
placed on the apparatus.
9. The Mains plug is used as a disconnect device and shall stay readily operable at any time.
English English _ 3
SAFETY INFORMATION
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
safety information
FCC Statement
Caution : Any changes or modifications in construction of this device which are not expressly approved by the
party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
1) This device may not cause harmful interference, and
2) This device must accept any interference received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, any cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
IMPORTANT SAFETY INSTRUCTIONS
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, or other apparatus (including amplifiers) that
produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one
wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third
prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the
point where they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with
the apparatus.
13. Unplug this apparatus when a card is used. Use caution when moving the cart/ apparatus
combination to avoid injury from tip-over.
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any
way, such as powersupply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus,
the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
4_ safety information
contents
PRODUCT INTRODUCTION
INITIALIZATION
Features
What’s included
At a Glance
Cable Color Scheme
Cable Selection
10
11
Installation
Precautions on installation
External Connection
12
Basic Operations
13
14
15
WIEGAND Output
RS-232 Output
8 Bit Burst Output Format
16
Troubleshooting
17
Product Specifications
12
OUTPUT FORMAT
13
TROUBLESHOOTING
16
PRODUCT SPECIFICATIONS
17
English English _ 5
CONTENTS
INSTALLATION AND EXTERNAL
CONNECTION
product introduction
FEATURES
This model is an elegant-looking proximity reader that is featured by the capacitive touch-sensing keypad. The back-lighted
keypad is useful especially for night operation, and its epoxy adhesion and aluminium case relieve you of worries about the
rain or any other challenging weather conditions. This model permits user access through authentication of the presented
proximity card and personal identification number using the keypad. With its red, green and orange indicators as well as the
Piezo buzzer, this model is guaranteed to make a stable and correct operation.
◆ 13.56 MHz [MIFARE] Contactless Smart Card & PIN Reader
◆ Compatible with ISO14443 Type A
◆ 34 bit Wiegand & RS-232 Data Output
◆ 8 Bit Burst Output Format supported
◆ Numeric keypad with backlighting for night operation
◆ Control of External LED Indicators
◆ Control of External Buzzer
◆ Tamper Switch
◆ Reverse Polarity Protection
◆ Weatherproof and Dustproof
WHAT’S INCLUDED
Check if the following items are included in the product package.
SSA-R2001V
Main Unit
3.5 x 40mm Screws (x4)
3.5 x 25mm Screws (x4)
6 x 30mm Plastic Anchor (x4)
RFID Reader
User Manual
SSA-R2001V
Quick Guide
6_ product introduction
3mm Hex Wrench (x1)
CD Manual
AT A GLANCE
Front/Rear
SSA-R2001V
LED
Displays the status of the system operation.
Keypad
Used to enter the ID/password.
Tamper Switch
A tamper switch to detect falling from the wall.
Connection Cable
Used to connect to the power source or I/O cable.
Buzzer
Piezo buzzer.
Fixing Hole
Fixing hole for wall-mounting.
English English _ 7
PRODUCT INTRODUCTION
product introduction
CABLE COLOR SCHEME
Name of I/O Pin
Signal Line
Cable Color
Power (+12V)
DC +12V
Red
Power Ground
GND(-)
Black
Wiegand Data Output 0
WIK_DATA0
Green
Wiegand Data Output 1
WIK_DATA1
White
Not used.
Not used.
Orange
RS-232 TX
TX OUT
Purple
Not used.
Not used.
Brown
RS-232 GND
GND
Black
LED Control
Green LED Control
Yellow
LED Control
Orange LED Control
Gray
Buzzer Control
BUZZER Control
Blue
Tamper Switch COM
Tamper COM
Pink
Tamper Switch NC
Tamper NC
Light yellow
CABLE SELECTION
Item
Cable Type
Power (DC12V)
Belden #9409, 18 AWG 2 Conductor, Unshielded
Card/PIN data (Wiegand)
Control Signal (LED,BUZZER)
TAMPER
Belden #9512, 22 AWG 4 Conductor, Shielded
RS-232 Cable
Belden #9829, 24 AWG 2-twisted pair, Shielded
8_ product introduction
Belden #9514, 22 AWG 8 Conductor, Shielded
installation and external connection
INSTALLATION
1. See [Figure 1] to drill 6-32” holes and 1/2” holes (totally 4) into the wall.
2. Tighten the four screws to secure the product to the wall.
60.30
79.60
4cm
100.80
00
91.50
4.35cm
6-32 or M3 Screws
8.7cm
Ø1.
86.50
1/2˝ hole
4.35cm
12.50
50
6-32 hole
69.10
54.50
6.4cm
Ø1.
72.50
36.50
26.23
Reader Module
Ø1.50
SSA-R2001V
18.50
Bezel
6.00
0.00
[Figure 1]
80.60
72.30
49.30
56.30
62.30
18.30
31.30
64.00
0.00
7.80
8.30
81.80
93.00
85.50
6-32 hole
40.30
Ø1.0
99.80
72.80
50.30
20.30
1.00
8.30
40.00
3mm Hex Wrench
[Figure 2]
English English _ 9
INSTALLATION AND EXTERNAL CONNECTION
30.30
3. With the provided 3mm hex wrench, fix the outer case to the product.
installation and external connection
PRECAUTIONS ON INSTALLATION
IF INSTALLING ON A METAL WALL
If you install the reader on a metal wall, the read range may be reduced.
To avoid this problem, it is recommended to insert the spacer between the metal wall and the reader as shown
below.
Metal
Wall
Spacer
2001V
SSA-R
Reader
IF INSTALLING MORE THAN ONE READER SIDE BY SIDE OR
FRONT AND BACK
If you install more than one reader side by side or front and back, the read range may be reduced. In this case, if
you present a card to one reader, the other reader may recognize the same card, meaning both readers read the
same card simultaneously.
To avoid this problem, keep at least 20 cm of space between the two readers.
Minimum
20cm
#Reader 1
01V
SSA-R20
Minimum
20cm
#Reader 2
01V
SSA-R20
#Reader 1
BACK TO BACK
INSTALLATION
#Reader 2
01V
SSA-R20
SIDEby
BYSide>
SIDE
Source Exif Data:
File Type : PDF
File Type Extension : pdf
MIME Type : application/pdf
PDF Version : 1.6
Linearized : Yes
XMP Toolkit : 3.1-701
Producer : Acrobat Distiller 7.0 (Windows)
Creator Tool : PScript5.dll Version 5.2
Modify Date : 2010:09:27 13:04:13+09:00
Create Date : 2010:09:27 13:04:13+09:00
Format : application/pdf
Title : Z8100239101A-SSA-R2001V-ENG-100927.indd
Creator : Administrator
Document ID : uuid:9495f09f-ac5a-444b-a654-c6ea5a596d1f
Instance ID : uuid:fe798550-05b1-41f5-a494-60270b532528
Page Count : 18
Author : Administrator
EXIF Metadata provided by EXIF.tools