Harbor Freight 10 Ton Hydraulic Short Body Ram Product Manual
Harbor-Freight-20-Ton-Hydraulic-Short-Body-Ram-Product-Manual-723457 harbor-freight-20-ton-hydraulic-short-body-ram-product-manual-723457
Manual for the 95979 10 Ton Hydraulic Short Body Ram 95979 10 Ton Hydraulic Short Body Ram
Manual for the 95980 20 Ton Hydraulic Short Body Ram 95980 20 Ton Hydraulic Short Body Ram
2015-05-27
: Harbor-Freight Harbor-Freight-10-Ton-Hydraulic-Short-Body-Ram-Product-Manual-723456 harbor-freight-10-ton-hydraulic-short-body-ram-product-manual-723456 harbor-freight pdf
Open the PDF directly: View PDF 
.
Page Count: 8
Page 2 For technical questions, please call 1-888-866-5797. ITEM
95979 & 95980
SAVE THIS MANUAL
Keep this manual for the safety
warnings and precautions, assembly,
operating, inspection, maintenance and
cleaning procedures. Write the product’s
serial number in the back of the manual
near the assembly diagram (or month
and year of purchase if product has no
number). Keep this manual and the
receipt in a safe and dry place for future
reference.
IMPORTANT SAFETY
INFORMATION
In this manual, on the labeling,
and all other information
provided with this product:
This is the safety alert
symbol. It is used to alert
you to potential personal
injury hazards. Obey all
safety messages that
follow this symbol to avoid
possible injury or death.
DANGER indicates
a hazardous
situation which, if not
avoided, will result in death or
serious injury.
WARNING indicates
a hazardous
situation which, if not
avoided, could result in death
or serious injury.
CAUTION, used
with the safety
alert symbol, indicates a
hazardous situation which, if
not avoided, could result in
minor or moderate injury.
NOTICE is used to
address practices
not related to personal injury.
CAUTION, without
the safety alert
symbol, is used to address
practices not related to
personal injury.
WARNING Read all safety
warnings and instructions.
Failure to follow the warnings
and instructions may result
in electric shock, re and/or
serious injury.
Save all warnings and
instructions for future
reference.
WORK AREA
1. Keep your work area clean and well
lit. Cluttered benches and dark areas
invite accidents.
2. Keep children and visitors away while
operating rams. Distractions can
cause you to lose control.
PERSONAL SAFETY
1. Stay alert. Watch what you are
doing, and use common sense when
operating a ram. Do not use a ram
while tired or under the inuence
of drugs, alcohol, or medication. A
moment of inattention while operating
rams may result in serious personal
injury.
2. Wear ANSI-approved safety goggles
during service and use.
Page 3For technical questions, please call 1-888-866-5797.ITEM
95979 & 95980
RAM USE AND CARE
1. Do not force the ram. Use the correct
ram for your application. The correct
ram will do the job better and safer at
the rate for which it is designed. Do
not force the ram and do not use the
ram for a purpose for which it is not
intended.
2. Store idle rams out of reach of
children and other untrained persons.
Rams are dangerous in the hands of
untrained users.
3. Maintain rams with care. Keep
rams clean. Properly maintained
rams are less likely to bind, break or
malfunction. Do not use a damaged
ram. Tag damaged rams “Do not use”
until repaired.
4. Check for misalignment or binding of
moving parts, breakage of parts, and
any other condition that may affect
the ram’s operation. If damaged,
have the ram serviced before using.
Many accidents are caused by poorly
maintained rams.
5. Use only accessories that are
recommended by the manufacturer
for your model. Accessories that may
be suitable for one ram may become
hazardous when used on another
ram.
6. Check all hydraulic connections and
hoses before applying pressure to the
Ram.
7. Do not leave the ram unattended
when it is pressurized. Release
pressure on the ram before leaving
work area.
8. Do not exceed working pressure or
lift loads heavier than the maximum
capacity of the Ram being used.
9. If lifting, support load properly when
nished.
10. Follow hydraulic pump instructions.
11. Do not use for aircraft purposes.
SERVICE
1. Ram service must be performed
only by qualied repair personnel.
Service or maintenance performed by
unqualied personnel could result in a
risk of injury.
2. When servicing a ram, use only
identical replacement parts. Follow
instructions in the “Inspection,
Maintenance, And Cleaning” section
of this manual. Use of unauthorized
parts or failure to follow maintenance
instructions may create a risk of
electric shock or injury.
3. Maintain labels and nameplates
on the ram. These carry important
information. If unreadable or missing,
contact Harbor Freight Tools for a
replacement.
4. Repairs or adjustments to hydraulic
systems should only be performed by
a qualied technician.
Page 4 For technical questions, please call 1-888-866-5797. ITEM
95979 & 95980
UNPACKING
When unpacking, check to
make sure that the item is intact and
undamaged. If any parts are missing or
broken, please call Harbor Freight Tools
at the number shown on the cover of this
manual as soon as possible.
ASSEMBLY INSTRUCTIONS
1. Using appropriate, grade 8 hardware
(not supplied) bolt Base either to the
machinery to be moved or against a
xed surface with the piston facing
the machinery.
2. If mounted to a xed surface, that
surface and hardware must be able
to withstand the force exerted without
failing.
SPECIFICATIONS
Model 95979 95980
Capacity 10 Ton 20 Ton
Ram Diameter 38 mm 50 mm
Working Pressure 9250 PSI 9250 PSI
Ram Travel 7/16” 7/16”
Height Range 1.73” – 2.16” 2.05” – 2.48”
Mounting Hole
Diameter 0.2” 0.35”
Dimensions 4 1/2” L x 2 1/4” W 5 11/16” L x 3” W
REV 09f
Page 5For technical questions, please call 1-888-866-5797.ITEM
95979 & 95980
OPERATION INSTRUCTIONS
Piston
Coupler
Mounting
Holes
FIGURE A
1. Connect the high pressure hydraulic
hose connector to the Coupler.
2. Check the connections between the
hydraulic hose, the power source,
and Coupler for tightness. These
connections must be tight before
using the Ram.
3. To operate, apply proper amount of
hydraulic pressure to the Ram.
4. When the machinery has moved
to the desired location, remove the
pressure.
5. After use, wipe with a clean cloth.
INSPECTION,
MAINTENANCE, AND
CLEANING
1. Before performing any maintenance,
be certain that all hydraulic pressure
has been removed and any
machinery is turned OFF.
2. Before each use, inspect the general
condition of the Ram. Check for
misalignment or binding of moving
parts, cracked or broken parts, and
any other condition that may affect
its safe operation. If abnormal
noise or vibration occurs, have the
problem corrected before further use.
Check for leaks from the Ram during
operation. Do not use damaged
equipment.
Page 6 For technical questions, please call 1-888-866-5797. ITEM
95979 & 95980
Part Description QTY
1 Nut 1
2 Ram 1
3 Seal Washer 1
4 O-ring 1
5 Cylinder Base 1
Part Description QTY
6 Coupling Ring 1
7 Coupling Bolt 1
8 O-ring 1
9 Dust Cap 1
PARTS LIST AND ASSEMBLY DIAGRAM
1
2
3
4
56
9
8
7
Page 7For technical questions, please call 1-888-866-5797.ITEM
95979 & 95980
PLEASE READ THE FOLLOWING CAREFULLY
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS
LIST AND ASSEMBLY DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL
ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY
REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE
OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT
HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. IN
FACT, THE MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY STATES
THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN
BY CERTIFIED AND LICENSED TECHNICIANS, AND NOT BY THE BUYER. THE
BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER
REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO,
OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT
PARTS THERETO.
Record Product’s Serial Number Here:
Note: If product has no serial number, record month and year of purchase instead.
Note: Some parts are listed and shown for illustration purposes only, and are not
available individually as replacement parts.
3491 Mission Oaks Blvd. • PO Box 6009 • Camarillo, CA 93011 • 1-888-866-5797
Limited 90 Day Warranty
Harbor Freight Tools Co. makes every effort to assure that its products meet high
quality and durability standards, and warrants to the original purchaser that this product
is free from defects in materials and workmanship for the period of 90 days from the
date of purchase. This warranty does not apply to damage due directly or indirectly,
to misuse, abuse, negligence or accidents, repairs or alterations outside our facilities,
criminal activity, improper installation, normal wear and tear, or to lack of maintenance.
We shall in no event be liable for death, injuries to persons or property, or for incidental,
contingent, special or consequential damages arising from the use of our product.
Some states do not allow the exclusion or limitation of incidental or consequential
damages, so the above limitation of exclusion may not apply to you. THIS WARRANTY
IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED,
INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS.
To take advantage of this warranty, the product or part must be returned to us with
transportation charges prepaid. Proof of purchase date and an explanation of the
complaint must accompany the merchandise. If our inspection veries the defect, we
will either repair or replace the product at our election or we may elect to refund the
purchase price if we cannot readily and quickly provide you with a replacement. We will
return repaired products at our expense, but if we determine there is no defect, or that
the defect resulted from causes not within the scope of our warranty, then you must
bear the cost of returning the product.
This warranty gives you specic legal rights and you may also have other rights which
vary from state to state.
