Harbor Freight 1 4 Ton Lever Manual Chain Hoist Product
Harbor-Freight-3-4-Ton-Lever-Manual-Chain-Hoist-Product-Manual-723759 harbor-freight-3-4-ton-lever-manual-chain-hoist-product-manual-723759
Harbor-Freight-66106-Users-Manual-209965 harbor-freight-66106-users-manual-209965
Harbor-Freight-1-1-2-Ton-Lever-Manual-Chain-Hoist-Product-Manual-723757 harbor-freight-1-1-2-ton-lever-manual-chain-hoist-product-manual-723757
66106 to the manual 3224bfde-e10b-41a4-b9b3-c001fd885804
2015-05-27
: Harbor-Freight Harbor-Freight-1-4-Ton-Lever-Manual-Chain-Hoist-Product-Manual-723758 harbor-freight-1-4-ton-lever-manual-chain-hoist-product-manual-723758 harbor-freight pdf
Open the PDF directly: View PDF .
Page Count: 12
Download | |
Open PDF In Browser | View PDF |
Lever Chain Hoist Item 67144 – 1/4 Ton Item 96482 – 3/4 Ton Item 66106 – 1-1/2 Ton Read this material before using this product. Failure to do so can result in serious injury. SAVE THIS MANUAL. When unpacking, make sure that the product is intact and undamaged. If any parts are missing or broken, please call 1-800-444-3353 as soon as possible. Visit our website at: http://www.harborfreight.com Copyright© 2008 by Harbor Freight Tools®. All rights reserved. No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly from the product described herein. Tools required for assembly and service may not be included. Manual Revised 11e Specifications Rated Capacity 67144: 1/4 Ton (500 lb.) 96482: 3/4 Ton (1,500 lb.) 66106: 1-1/2 Tons (3,000 lb.) Lift Height 5 Feet Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference. IMPORTANT SAFETY INFORMATION In this manual, on the labeling, and all other information provided with this product: This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death. CAUTION, used with the safety alert symbol, indicates a hazardous situation which, if not avoided, could result in minor or moderate injury. NOTICE is used to address practices not related to personal injury. CAUTION, without the safety alert symbol, is used to address practices not related to personal injury. General Safety Rules WARNING Read all safety warnings and instructions. Failure to follow the warnings and instructions may result in serious injury. Save all warnings and instructions for future reference. The warnings, precautions, and instructions discussed in this instruction manual cannot cover all possible conditions and situations that may occur. It must be understood by the operator that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator. 1. Work area safety a. Keep work area clean and well lit. Cluttered or dark areas invite accidents. DANGER indicates a hazardous situation which, if not avoided, will result in death or serious injury. WARNING indicates a hazardous situation which, if not avoided, could result in death or serious injury. Page 2 b. Keep children and bystanders away while operating tools. Distractions can cause you to lose control. c. Connect the Hoist to solid beam, capable of supporting the weight of the Hoist and equipment being lifted. For technical questions, please call 1-800-444-3353. Lever Chain Hoist 2. Personal safety a. Stay alert, watch what you are doing and use common sense when using a tool. Do not use tools while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating a tool may result in serious personal injury. b. Use personal protective equipment. Always wear eye protection. Wear hard hat. Safety equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries. c. Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewelry or long hair can be caught in moving parts. d. Only use safety equipment that has been approved by an appropriate standards agency. Unapproved safety equipment may not provide adequate protection. Eye protection must be ANSI-approved. 3. Tool use and care a. Store idle tools out of the reach of children and do not allow persons unfamiliar with this tool or these instructions to operate the tool. Tools are dangerous in the hands of untrained users. b. Inspect before every use. Check for: • damaged, worn, or deformed/ stretched chain links or hook, • damaged, disabled, or missing safety latch, • misalignment or binding of moving parts, • breakage of parts, and • any other condition that may affect the tool’s operation. If damaged, have the tool repaired before use. Many accidents are caused by poorly maintained tools. c. Do not lift, lower, pull anything beyond rated capacity. Be aware of dynamic loading! Lever Chain Hoist Sudden load movement may briefly create excess load causing product failure. Do not jostle or twist a suspended load, move item to the work area, lower and release the Hoist before beginning work. d. Do not use the Hoist to lift a person or animal. e. Do not work underneath a suspended load. f. Maintain labels and nameplates on the tool. These carry important safety information. If unreadable or missing, contact Harbor Freight Tools for a replacement. g. This product is not a toy. Keep it out of reach of children. h. Do not lubricate the braking system. i. Do not operate with twisted chain. j. Do not use handle extension to increase force on the handle. k. Do not insert bolt between chain links to ‘splice’ chain. l. Do not use a hammer to force hook/chain into place. m. Do not attach hook tip onto chain. n. Attach hook completely around attachment point and make sure the safety latch closes properly, as shown in Figure A, right. Figure A: Incorrect and Correct Hook Attachment o. Do not turn the Brake Knob (if equipped) to lower a load. p. Do not leave load suspended when unattended. Load brake is intended to support load only temporarily. q. Lift load slightly off ground and stop to test load brake before each lift. For technical questions, please call 1-800-444-3353. Page 3 67144 – 1/4 Ton Operating Instructions Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this manual including all text under subheadings therein before set up or use of this product. Note: For additional information regarding the parts listed in the following pages, refer to the Assembly Diagram near the end of this manual. WARNING! Verify that the load weighs less than the capacity of your Hoist model, as listed in the Specifications chart. Attachment point must be rated to support the combined weight of hoist and load. 1. Attach the Hoist to the connection point by sliding the Top Hook onto it. The Top Hook must fit the connection point securely, with the safety latch fully engaged, as shown in Figure A, on the right. Top Hook safety latch Figure A: Incorrect and Correct Hook Attachment 2. Turn the Selector Lever to the neutral position (see Figure C) to disengage the ratchet. Selector Lever Lever Handle Selector Lever safety latch Figure C: 67144 Selector Lever Neutral Position Load Hook 3. Pull the load chain by hand and attach the Load Hook to the load. The safety latch should be fully engaged. Do not suspend a load on just the end of the hook, see Figure A. Figure B: 67144 Controls Page 4 For technical questions, please call 1-800-444-3353. Lever Chain Hoist 4. Move the Selector Lever to the up position (see Figure D) and ratchet the Lever Handle to lift the load. 6. If the load is to be moved, lower it close to the ground prior to attempting to relocate the load. Do not touch the Selector Lever until the load is ready to be lowered. 7. To lower the load, turn the Selector Lever to the down position (see Figure E) and ratchet until the load is resting fully on the work area. Figure D: 67144 Selector Lever Up Position Note: If there is slack in the load chain, you may need to pull on the load chain slightly to get the ratchet to engage until the slack is taken up. 5. Lift load slightly and stop momentarily to make sure the load brake works before proceeding. WARNING! Keep bystanders and pets away when a load is raised. Do not work under a raised load. Lever Chain Hoist Figure E: 67144 Selector Lever Down Position 8. Disconnect Hoist, clean, then store the tool indoors out of children’s reach. For technical questions, please call 1-800-444-3353. Page 5 96482 – 3/4 Ton and 66106 – 1-1/2 Ton Operating Instructions Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this manual including all text under subheadings therein before set up or use of this product. WARNING! Verify that the load weighs less than the capacity of your Hoist model, as listed in the Specifications chart. Attachment point must be rated to support the combined weight of hoist and load. 1. Attach the Hoist to the connection point by sliding the Top Hook onto it. The Top Hook must fit the connection point securely, with the safety latch fully engaged, as shown in Figure A, on the right. Note: For additional information regarding the parts listed in the following pages, refer to the Assembly Diagram near the end of this manual. Top Hook Figure A: Incorrect and Correct Hook Attachment safety latch 2. Turn the Selector Lever to the neutral position (see Figure G) to disengage the ratchet. ONLY IF UNLOADED, turn Brake Knob counterclockwise to release load holding brake Brake Knob Selector Lever Lever Handle Selector Lever U 1 D N 1 /2 Brake Knob TON LEVER CHAIN HOIST ITEM 66106 WARNING Figure G: 66106/96482 Selector Lever and Brake Knob “N” / Neutral Position safety latch To prevent serious injury: 1. Do not use for overhead lifting or for lifting people or animals. 2. Stay clear of load while suspended. 3. Inspect before every use; do not use if parts loose or damaged. 4. Do not exceed 3000 lb. capacity. Be aware of dynamic loading! Sudden load movement may briefly create excess load causing product failure. 5. Anchor points must be able to support load. Balance load evenly. 6. Safety clasp must close around load. 7. Wear ANSI-approved safety goggles, heavy-duty work gloves, and steel-toed work boots during use. 8. Keep braking surfaces dry and free from lubricant. 9. Do not change direction during use. 3. Turn the Brake Knob counterclockwise until it stops to release the load holding brake. 08j-11d Load Hook Figure F: 66106/96482 Controls Made in China. DO NOT REMOVE WARNING! DO NOT TURN THE BRAKE KNOB COUNTERCLOCKWISE UNLESS NO LOAD IS SUPPORTED. 4. Pull the load chain by hand and attach the Load Hook to the load. The safety latch should be fully engaged. Do not suspend a load on just the end of the hook, see Figure A. Page 6 For technical questions, please call 1-800-444-3353. Lever Chain Hoist 5. WARNING! Turn the Brake Knob clockwise until it stops before lifting or lowering a load. 9. To lower the load, turn the Selector Lever to the down position (see Figure I) and ratchet until the load is resting fully on the work area. 6. Move the Selector Lever to the up position (see Figure H) and ratchet the Lever Handle to lift the load. WARNING! DO NOT LOWER BY TURNING BRAKE KNOB OR LOAD WILL FALL. Turn Brake Knob clockwise to engage brake U D N 11/2 TON LEVER CHAIN HOIST U 1 D N 1 /2 TON LEVER CHAIN HOIST Figure H: 66106/96482 Selector Lever and Brake Knob “U” / Up Position ITEM 66106 WARNING To prevent serious injury: 1. Do not use for overhead lifting or for lifting people or animals. 2. Stay clear of load while suspended. 3. Inspect before every use; do not use if parts loose or damaged. 4. Do not exceed 3000 lb. capacity. Be aware of dynamic loading! Sudden load movement may briefly create excess load causing product failure. 5. Anchor points must be able to support load. Balance load evenly. 6. Safety clasp must close around load. 7. Wear ANSI-approved safety goggles, heavy-duty work gloves, and steel-toed work boots during use. 8. Keep braking surfaces dry and free from lubricant. 9. Do not change direction during use. Note: If there is slack in the load chain, you may need to pull on the load chain slightly to get the ratchet to engage until the slack is taken up. 08j-11d Made in China. ITEM 66106 WARNING Figure I: 66106/96482 Selector Lever “D” / Down Position To prevent serious injury: 1. Do not use for overhead lifting or for lifting people or animals. 2. Stay clear of load while suspended. 3. Inspect before every use; do not use if parts loose or damaged. 4. Do not exceed 3000 lb. capacity. Be aware of dynamic loading! Sudden load movement may briefly create excess load causing product failure. 5. Anchor points must be able to support load. Balance load evenly. 6. Safety clasp must close around load. 7. Wear ANSI-approved safety goggles, heavy-duty work gloves, and steel-toed work boots during use. 8. Keep braking surfaces dry and free from lubricant. 9. Do not change direction during use. 10. Disconnect Hoist, clean, then store the tool indoors out of children’s reach. 08j-11d Made in China. DO NOT REMOVE DO NOT REMOVE 7. Lift load slightly and stop momentarily to make sure the load brake works before proceeding. WARNING! Keep bystanders and pets away when a load is raised. Do not work under a raised load. 8. If the load is to be moved, lower it close to the ground prior to attempting to relocate the load. Do not touch the Selector Lever until the load is ready to be lowered. User-Maintenance Instructions (for all lever chain hoists) Procedures not specifically explained in this manual must be performed only by a qualified technician. TO PREVENT SERIOUS INJURY FROM TOOL FAILURE: Do not use damaged equipment. If abnormal noise occurs, have the problem corrected before further use. 1. BEFORE EACH USE, inspect the general condition of the tool. Check for loose screws, misalignment or binding of moving parts, cracked or broken parts and any other condition that may affect its safe operation. 2. AFTER USE, clean surfaces of the tool with clean cloth. 3. WEEKLY, lubricate all chain links. Apply new lubricant on top of the old layer of lubricant. 4. PERIODICALLY, lubricate the moving parts of the Hoist with white lithium grease, but not the braking system. Lever Chain Hoist For technical questions, please call 1-800-444-3353. Page 7 PLEASE READ THE FOLLOWING CAREFULLY THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS, AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO. Record Product’s Serial Number Here: Note: If product has no serial number, record month and year of purchase instead. Note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. Parts Lists and Diagrams 67144 Parts List IMPORTANT: When ordering parts, specify which SKU the parts are for. Part 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 Page 8 Description Label Gear Case Top Pin Side Plate Guide Roller Lifting Shaft Bushing Stay Bolt A Top Hook Stay Bolt B Pawl Spring Pawl Circlip Split Cam Spring Washer A Hex Nut A Chain Stripper Chain End Ring Qty. 1 1 1 2 2 1 1 2 1 1 1 1 1 1 1 1 1 1 Part 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 Description Bottom Hook Load Chain Brake Seat Brake Disc Brake Spring Ratchet Wheel Female Thread Disk Brake Cover Handle Flat Washer Slot Knob Split Pin Spring Washer B Hex Nut B Suspension Pin Locking Nut Selector Lever For technical questions, please call 1-800-444-3353. Qty. 1 1 1 2 1 1 1 1 1 1 1 1 5 5 1 1 1 Lever Chain Hoist 67144 Assembly Diagram IMPORTANT: When ordering parts, specify which SKU the parts are for. Page 9 For technical questions, please call 1-800-444-3353. Lever Chain Hoist 66106 and 96482 Parts List IMPORTANT: When ordering parts, specify which SKU the parts are for. Part 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 Page 10 Description Brake Knob Screw Spring Washer Lever Handle Selector Wheel Handle Case Thread Disk Brake Disc Ratchet Disk Brake Spring Side Plate A Bearing Ring Sprocket Top Hook Top Pin Side Plate B Snap Ring Gear Disk A End Plate Hex Nut Spring Washer Qty 1 2 2 1 1 1 1 2 1 1 1 1 1 1 1 1 1 1 1 6 6 Part 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 Description Gear Disk B Driving Shaft Splined Gear Guide Roller Chain Stripper Chain Load Hook Chain Pin Snap Ring Brake Seat Pawl Spring Pawl Washer Locknut Changeover Pawl Spring Pin Changeover Spring Selector Lever Slotted Nut Split Pin For technical questions, please call 1-800-444-3353. Qty 1 1 1 2 1 1 1 1 2 1 2 2 2 2 1 1 1 1 1 1 Lever Chain Hoist 66106 and 96482 Assembly Diagram IMPORTANT: When ordering parts, specify which SKU the parts are for. Page 11 For technical questions, please call 1-800-444-3353. Lever Chain Hoist Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase. This warranty does not apply to damage due directly or indirectly, to misuse, abuse, negligence or accidents, repairs or alterations outside our facilities, criminal activity, improper installation, normal wear and tear, or to lack of maintenance. We shall in no event be liable for death, injuries to persons or property, or for incidental, contingent, special or consequential damages arising from the use of our product. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation of exclusion may not apply to you. THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS. To take advantage of this warranty, the product or part must be returned to us with transportation charges prepaid. Proof of purchase date and an explanation of the complaint must accompany the merchandise. If our inspection verifies the defect, we will either repair or replace the product at our election or we may elect to refund the purchase price if we cannot readily and quickly provide you with a replacement. We will return repaired products at our expense, but if we determine there is no defect, or that the defect resulted from causes not within the scope of our warranty, then you must bear the cost of returning the product. This warranty gives you specific legal rights and you may also have other rights which vary from state to state. 3491 Mission Oaks Blvd. • PO Box 6009 Camarillo, CA 93011 • (800) 444-3353 3491 Mission Oaks Blvd. • PO Box 6009 • Camarillo, CA 93011 • (800) 444-3353
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 5.0-c060 61.134777, 2010/02/12-17:32:00 Instance ID : uuid:c873d1cd-bec8-0748-87e8-b8d624987502 Document ID : xmp.did:5301279F3F2068118083D313CF822C46 Original Document ID : adobe:docid:indd:c6ac33e4-8be9-11dd-aa29-c2d8d53a371b Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:4F01279F3F2068118083D313CF822C46 Derived From Document ID : adobe:docid:indd:c6ac33e4-8be9-11dd-aa29-c2d8d53a371b Derived From Original Document ID: adobe:docid:indd:c6ac33e4-8be9-11dd-aa29-c2d8d53a371b Derived From Rendition Class : default History Action : saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved History Instance ID : xmp.iid:D0CF85EA0C20681180839AB89704DC2F, xmp.iid:D1CF85EA0C20681180839AB89704DC2F, xmp.iid:D4CF85EA0C20681180839AB89704DC2F, xmp.iid:CC0966920E20681180839AB89704DC2F, xmp.iid:D10966920E20681180839AB89704DC2F, xmp.iid:D40966920E20681180839AB89704DC2F, xmp.iid:44F291ED1420681180839AB89704DC2F, xmp.iid:02801174072068118C14FBFC44963BDB, xmp.iid:03801174072068118C14FBFC44963BDB, xmp.iid:05801174072068118C14FBFC44963BDB, xmp.iid:06801174072068118C14FBFC44963BDB, xmp.iid:CBBCE21A2D2068118083D313CF822C46, xmp.iid:CCBCE21A2D2068118083D313CF822C46, xmp.iid:CEBCE21A2D2068118083D313CF822C46, xmp.iid:D0BCE21A2D2068118083D313CF822C46, xmp.iid:09838570362068118083D313CF822C46, xmp.iid:0B838570362068118083D313CF822C46, xmp.iid:0D838570362068118083D313CF822C46, xmp.iid:0F838570362068118083D313CF822C46, xmp.iid:11838570362068118083D313CF822C46, xmp.iid:69E2CDB93A2068118083D313CF822C46, xmp.iid:6CE2CDB93A2068118083D313CF822C46, xmp.iid:6FE2CDB93A2068118083D313CF822C46, xmp.iid:70E2CDB93A2068118083D313CF822C46, xmp.iid:44396BBA3E2068118083D313CF822C46, xmp.iid:48396BBA3E2068118083D313CF822C46, xmp.iid:4C01279F3F2068118083D313CF822C46, xmp.iid:4D01279F3F2068118083D313CF822C46, xmp.iid:4E01279F3F2068118083D313CF822C46, xmp.iid:4F01279F3F2068118083D313CF822C46, xmp.iid:5301279F3F2068118083D313CF822C46, xmp.iid:E79A0BDF432068118083D313CF822C46, xmp.iid:00801174072068118083ACC2553A82F0, xmp.iid:B8CFE1AB0A2068118083ACC2553A82F0, xmp.iid:BDCFE1AB0A2068118083ACC2553A82F0, xmp.iid:7FD433D1112068118083ACC2553A82F0, xmp.iid:84D433D1112068118083ACC2553A82F0, xmp.iid:85D433D1112068118083ACC2553A82F0, xmp.iid:86D433D1112068118083ACC2553A82F0, xmp.iid:1E558A271E2068118083ACC2553A82F0, xmp.iid:23558A271E2068118083ACC2553A82F0, xmp.iid:24558A271E2068118083ACC2553A82F0, xmp.iid:B0FB78771F2068118083ACC2553A82F0, xmp.iid:B1FB78771F2068118083ACC2553A82F0, xmp.iid:B2FB78771F2068118083ACC2553A82F0, xmp.iid:B3FB78771F2068118083ACC2553A82F0, xmp.iid:1A5F9A5C0A2068118083E1904A0E58E3, xmp.iid:A9FD936D132068118083BBE8DB18CCDA, xmp.iid:FF34CD82182068118083BBE8DB18CCDA, xmp.iid:0435CD82182068118083BBE8DB18CCDA, xmp.iid:77EE63C91A2068118083BBE8DB18CCDA, xmp.iid:9DA39F301B2068118083BBE8DB18CCDA, xmp.iid:A4A39F301B2068118083BBE8DB18CCDA, xmp.iid:BA88A4B81B2068118083BBE8DB18CCDA, xmp.iid:5609BACF1E2068118083BBE8DB18CCDA, xmp.iid:5D09BACF1E2068118083BBE8DB18CCDA, xmp.iid:B10C97E11F2068118083BBE8DB18CCDA, xmp.iid:08CE4FEF1F2068118083BBE8DB18CCDA, xmp.iid:09CE4FEF1F2068118083BBE8DB18CCDA, xmp.iid:12CE4FEF1F2068118083BBE8DB18CCDA, xmp.iid:F25E7D261D2068118083EB766A805EEE, xmp.iid:6DAD31A6262068118083EB766A805EEE, xmp.iid:DACF96C1272068118083EB766A805EEE, xmp.iid:D1CD90C5272068118083EB766A805EEE, xmp.iid:FE7F1174072068118083DA73D21E1E3B, xmp.iid:47A84DDA092068118083DA73D21E1E3B, xmp.iid:41DBEF4D0B2068118083DA73D21E1E3B, xmp.iid:A919577A0B2068118083DA73D21E1E3B, xmp.iid:B2F387CE0B2068118083DA73D21E1E3B, xmp.iid:18201EB90C2068118083DA73D21E1E3B, xmp.iid:21201EB90C2068118083DA73D21E1E3B, xmp.iid:9D7C68020D2068118083DA73D21E1E3B, xmp.iid:2D32DC1E0D2068118083DA73D21E1E3B, xmp.iid:5FE84A520D2068118083DA73D21E1E3B, xmp.iid:A72819C70D2068118083DA73D21E1E3B, xmp.iid:B02819C70D2068118083DA73D21E1E3B, xmp.iid:0651790E0E2068118083DA73D21E1E3B, xmp.iid:9612714A0E2068118083DA73D21E1E3B, xmp.iid:CFA8209D0E2068118083DA73D21E1E3B, xmp.iid:9B3358070F2068118083DA73D21E1E3B, xmp.iid:25B55C860F2068118083DA73D21E1E3B, xmp.iid:2EB55C860F2068118083DA73D21E1E3B, xmp.iid:7CD25C6D102068118083DA73D21E1E3B, xmp.iid:38891030112068118083DA73D21E1E3B, xmp.iid:70E37149112068118083DA73D21E1E3B, xmp.iid:4299C052112068118083DA73D21E1E3B, xmp.iid:FF7F1174072068118083AE5679EB626E, xmp.iid:A191B182072068118083AE5679EB626E, xmp.iid:9DA3D40C092068118083AE5679EB626E, xmp.iid:E5DF54410D2068118083AE5679EB626E, xmp.iid:822FBDD00D2068118083AE5679EB626E, xmp.iid:A73664370E2068118083AE5679EB626E, xmp.iid:7669033F0E2068118083AE5679EB626E, xmp.iid:9B86BA880F2068118083AE5679EB626E, xmp.iid:10A05790112068118083AE5679EB626E, xmp.iid:978ECBA3122068118083AE5679EB626E, xmp.iid:E1D99432132068118083AE5679EB626E, xmp.iid:96CDF936132068118083AE5679EB626E, xmp.iid:273200D4132068118083AE5679EB626E, xmp.iid:34D4CAEE132068118083AE5679EB626E, xmp.iid:2CFDCD62142068118083AE5679EB626E, xmp.iid:0D98C660182068118083AE5679EB626E, xmp.iid:FAABEFB6182068118083AE5679EB626E, xmp.iid:968763D7182068118083AE5679EB626E, xmp.iid:9D980C73112068118083B9A299223367, xmp.iid:3E5E467B112068118083B9A299223367, xmp.iid:2018D8B6302068118083AF97CB172FFE, xmp.iid:932D9ACE302068118083AF97CB172FFE History When : 2011:03:28 08:40:44-07:00, 2011:03:28 08:40:44-07:00, 2011:03:28 08:47:54-07:00, 2011:03:28 08:48:37-07:00, 2011:03:28 09:01:33-07:00, 2011:03:28 09:19:07-07:00, 2011:03:28 09:34:09-07:00, 2011:04:12 16:01:31-07:00, 2011:04:12 16:04:43-07:00, 2011:04:12 16:10:24-07:00, 2011:04:12 16:12:05-07:00, 2011:04:13 14:03-07:00, 2011:04:13 14:06:34-07:00, 2011:04:13 14:11:31-07:00, 2011:04:13 14:12:42-07:00, 2011:04:13 14:16:16-07:00, 2011:04:13 14:21:50-07:00, 2011:04:13 14:28:58-07:00, 2011:04:13 14:30:30-07:00, 2011:04:13 14:30:48-07:00, 2011:04:13 14:46:57-07:00, 2011:04:13 14:51:48-07:00, 2011:04:13 14:52:04-07:00, 2011:04:13 14:52:29-07:00, 2011:04:13 15:15:36-07:00, 2011:04:13 15:18:19-07:00, 2011:04:13 15:21:59-07:00, 2011:04:13 15:28:33-07:00, 2011:04:13 15:31:58-07:00, 2011:04:13 15:43:23-07:00, 2011:04:13 15:43:23-07:00, 2011:04:13 15:52:25-07:00, 2011:04:14 13:01:24-07:00, 2011:04:14 13:09:25-07:00, 2011:04:14 13:11:01-07:00, 2011:04:14 14:00:34-07:00, 2011:04:14 14:55:31-07:00, 2011:04:14 15:22:05-07:00, 2011:04:14 15:24:04-07:00, 2011:04:14 15:28:53-07:00, 2011:04:14 15:35:38-07:00, 2011:04:14 15:36:25-07:00, 2011:04:14 15:38:17-07:00, 2011:04:14 15:44:20-07:00, 2011:04:14 15:53:07-07:00, 2011:04:14 15:55:46-07:00, 2011:04:15 08:51:40-07:00, 2011:04:15 12:37:13-07:00, 2011:04:15 12:37:24-07:00, 2011:04:15 12:39:06-07:00, 2011:04:15 12:53:41-07:00, 2011:04:15 12:56:34-07:00, 2011:04:15 12:59:46-07:00, 2011:04:15 13:00:22-07:00, 2011:04:15 13:22:30-07:00, 2011:04:15 13:29:53-07:00, 2011:04:15 13:30:09-07:00, 2011:04:15 13:30:32-07:00, 2011:04:15 13:50:03-07:00, 2011:04:15 13:58:12-07:00, 2011:04:19 15:50:44-07:00, 2011:04:19 16:01:24-07:00, 2011:04:19 16:09:19-07:00, 2011:04:19 16:09:26-07:00, 2011:04:21 08:10:40-07:00, 2011:04:21 08:27:51-07:00, 2011:04:21 08:38:14-07:00, 2011:04:21 08:39:29-07:00, 2011:04:21 08:41:50-07:00, 2011:04:21 08:48:23-07:00, 2011:04:21 08:49:50-07:00, 2011:04:21 08:50:26-07:00, 2011:04:21 08:51:14-07:00, 2011:04:21 08:52:40-07:00, 2011:04:21 08:55:56-07:00, 2011:04:21 08:56:14-07:00, 2011:04:21 08:57:56-07:00, 2011:04:21 08:59:37-07:00, 2011:04:21 09:01:56-07:00, 2011:04:21 09:04:54-07:00, 2011:04:21 09:08:27-07:00, 2011:04:21 09:09:52-07:00, 2011:04:21 09:14:54-07:00, 2011:04:21 09:20:21-07:00, 2011:04:21 09:21:04-07:00, 2011:04:21 09:21:19-07:00, 2011:04:27 08:18:09-07:00, 2011:04:27 08:18:34-07:00, 2011:04:27 08:29:35-07:00, 2011:04:27 08:59:41-07:00, 2011:04:27 09:03:42-07:00, 2011:04:27 09:06:34-07:00, 2011:04:27 09:06:47-07:00, 2011:04:27 09:29:46-07:00, 2011:04:27 09:30:32-07:00, 2011:04:27 09:38:14-07:00, 2011:04:27 09:42:13-07:00, 2011:04:27 09:42:21-07:00, 2011:04:27 09:46:44-07:00, 2011:04:27 09:47:29-07:00, 2011:04:27 09:50:44-07:00, 2011:04:27 10:19:18-07:00, 2011:04:27 10:21:43-07:00, 2011:04:27 10:22:37-07:00, 2011:05:05 09:25:09-07:00, 2011:05:05 09:25:23-07:00, 2011:05:06 13:09:07-07:00, 2011:05:06 13:09:46-07:00 History Software Agent : Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0 History Changed : /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata Create Date : 2011:05:06 13:09:59-07:00 Modify Date : 2011:05:06 13:10:01-07:00 Metadata Date : 2011:05:06 13:10:01-07:00 Creator Tool : Adobe InDesign CS5 (7.0.4) Doc Change Count : 6101 Format : application/pdf Producer : Adobe PDF Library 9.9 Trapped : False Page Count : 12 Creator : Adobe InDesign CS5 (7.0.4)EXIF Metadata provided by EXIF.tools