Harbor Freight 69575 Owner S Manual
Manual for the 69575 16 Gauge Finish Nailer 69575 16 Gauge Finish Air Nailer
2014-07-05
: Harbor-Freight Harbor-Freight-69575-Owner-S-Manual harbor-freight-69575-owner-s-manual harbor-freight pdf
Open the PDF directly: View PDF 
.
Page Count: 20
| Download | |
| Open PDF In Browser | View PDF |
Table of Contents SAFETY Safety.......................................................... 2 Maintenance............................................... 14 Specifications.............................................. 7 Setup........................................................... 9 Operation.................................................... 12 Parts List and Diagram............................... 18 Warranty..................................................... 20 WARNING SYMBOLS AND DEFINITIONS SETUP This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death. Indicates a hazardous situation which, if not avoided, will result in death or serious injury. Indicates a hazardous situation which, if not avoided, could result in death or serious injury. Indicates a hazardous situation which, if not avoided, could result in minor or moderate injury. OPERATION Addresses practices not related to personal injury. Symbol PSI Property or statement Pounds per square inch of pressure CFM Cubic Feet per Minute flow SCFM Cubic Feet per Minute flow at standard conditions Symbol Property or statement Warning marking concerning Risk of Puncture Injury. Wear heavy‑duty work gloves. Read the manual before set-up and/or use. WARNING marking concerning Risk of Hearing Loss. Wear hearing protection. MAINTENANCE NPT National pipe thread, tapered NPS National pipe thread, straight WARNING marking concerning Risk of Respiratory Injury. Wear NIOSH‑approved dust mask/respirator. WARNING marking concerning Risk of Eye Injury. Wear ANSI-approved safety goggles with side shields. WARNING marking concerning Risk of Explosion. Table A: Symbol Definitions Page 2 For technical questions, please call 1-800-444-3353. Item 69575 IMPORTANT SAFETY INSTRUCTIONS SAFETY INSTRUCTIONS PERTAINING TO A RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS WARNING – When using tools, basic precautions should always be followed, including the following: General To reduce the risks of electric shock, fire, and injury to persons, read all the instructions before using the tool. Work area a. Keep the work area clean and well lighted. Cluttered benches and dark areas increase the risks of electric shock, fire, and injury to persons. c. Keep bystanders, children, and visitors away while operating the tool. Distractions are able to result in the loss of control of the tool. SETUP b. Do not operate the tool in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. The tool is able to create sparks resulting in the ignition of the dust or fumes. b. Dress properly. Do not wear loose clothing or jewelry. Contain long hair. Keep hair, clothing, and gloves away from moving parts. Loose clothes, jewelry, or long hair increases the risk of injury to persons as a result of being caught in moving parts. c. Avoid unintentional starting. Be sure the trigger is released before connecting to the air supply. Do not carry the tool with your finger on the trigger or connect the tool to the air supply with the trigger pressed. d. Do not overreach. Keep proper footing and balance at all times. Proper footing and balance enables better control of the tool in unexpected situations. e. Item 69575 Use safety equipment. A dust mask, non-skid safety shoes and a hard hat must be used for the applicable conditions. Wear heavy-duty work gloves during use. f. Always wear eye protection. Wear ANSI-approved safety goggles with side shields. g. Always wear hearing protection when using the tool. Prolonged exposure to high intensity noise is able to cause hearing loss. h. Do not attach the hose or tool to your body. Attach the hose to the structure to reduce the risk of loss of balance if the hose shifts. i. Always assume that the tool contains fasteners. Do not point the tool toward yourself or anyone whether it contains fasteners or not. j. WARNING – Do not fire fastener on top of another fastener. This is able to cause the fastener to be deflected and hit someone, or cause the tool to react and result in a risk of injury to persons. k. WARNING – Remove finger from the trigger when not driving fasteners. Never carry the tool with finger on trigger, the tool is able to fire a fastener. For technical questions, please call 1-800-444-3353. Page 3 MAINTENANCE a. Stay alert. Watch what you are doing and use common sense when operating the tool. Do not use the tool while tired or under the influence of drugs, alcohol, or medication. A moment of inattention while operating the tool increases the risk of injury to persons. OPERATION Personal safety Tool use and care SAFETY a. Use clamps or another practical way to secure and support the workpiece to a stable platform. Holding the work by hand or against the body is unstable and can lead to loss of control. b. Do not force the tool. Use the correct tool for the application. The correct tool will do the job better and safer at the rate for which the tool is designed. c. Do not use the tool if the trigger does not turn the tool on or off. Any tool that cannot be controlled with the trigger is dangerous and must not be used until repaired. SETUP d. Disconnect the tool from the air source before making adjustments, doing tool maintenance, clearing jams, touching the safety nosepiece, leaving work area, loading, or unloading the tool. Such precautionary measures reduce the risk of injury to persons. e. Store the tool when it is idle out of reach of children and other untrained persons. A tool is dangerous in the hands of untrained users. f. Maintain the tool with care. A properly maintained tool reduces the risk of binding and is easier to control. g. Check for misalignment or binding of moving parts, breakage of parts, and any other condition that affects the tool’s operation. If damaged, have the tool serviced before using. Many accidents are caused by poorly maintained tools. There is a risk of bursting if the tool is damaged. h. Use only accessories that are identified by the manufacturer for the specific tool model. Use of an accessory not intended for use with the specific tool model, increases the risk of injury to persons. i. Use only those fasteners listed in the Specifications chart of this manual. Fasteners not identified for use with this tool by the tool manufacturer are able to result in a risk of injury to persons or tool damage when used in this tool. Service a. Tool service must be performed only by qualified repair personnel. c. Use only the lubricants supplied with the tool or specified by the manufacturer. b. When servicing a tool, use only identical replacement parts. Use only authorized parts. OPERATION Air source a. Never connect to an air source that is capable of exceeding 200 PSI. Over pressurizing the tool may cause bursting, abnormal operation, breakage of the tool or serious injury to persons. Use only clean, dry, regulated compressed air at the rated pressure or within the rated pressure range as marked on the tool. Always verify prior to using the tool that the air source has been adjusted to the rated air pressure or within the rated air-pressure range. b. Never use oxygen, carbon dioxide, combustible gases or any bottled gas as an air source for the tool. Such gases are capable of explosion and serious injury to persons. SAVE THESE INSTRUCTIONS. MAINTENANCE Page 4 For technical questions, please call 1-800-444-3353. Item 69575 Specific Safety Instructions 3. Choice of triggering method is important. Check manual for triggering options. 4. Always assume the tool contains fasteners. 5. Do not point the tool toward yourself or anyone whether it contains fasteners or not. 6. Do not actuate the tool unless the tool is placed firmly against the workpiece. 20. Do not fire fasteners into a workpiece that has people, utility lines, or other objects behind or inside it. 21. Keep balance while using this tool. Keep area below clear if working in an elevated location, and secure air hose to prevent falls from bystanders accidentally pulling on it. 22. Obey the manual for the air compressor used to power this tool. 8. No horseplay. This tool is not a toy and can be deadly if misused. 24. Do not engrave or stamp anything into the housing to avoid weakening it. 9. Do not load the tool with fasteners when any one of the operating controls, such as the Trigger or Safety Nosepiece, is activated. 25. WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities, contains chemicals known [to the State of California] to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are: • Lead from lead-based paints • Crystalline silica from bricks and cement or other masonry products • Arsenic and chromium from chemically treated lumber Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in a well ventilated area, and work with approved safety equipment, such as those dust masks that are specially designed to filter out microscopic particles. (California Health & Safety Code § 25249.5, et seq.) WARNING: The brass components of this product contain lead, a chemical known to the State of California to cause birth defects (or other reproductive harm). (California Health & Safety code § 25249.5, et seq.) 11. Do not operate the tool if any portion of the tool operating controls is inoperable, disconnected, altered, or not working properly. 12. Disconnect the tool from the air supply when: a. Unattended. b. Performing any maintenance or repair. c. Clearing a jam. d. Moving the tool to a new location. 13. Do not make any modifications to this tool. 14. Refer to the tool maintenance instructions for detailed information on the proper maintenance of the tool. 15. Fire fasteners into an appropriate work surface only. Do not attempt to fire fasteners into surfaces too hard to penetrate. Do not drive fasteners on top of other fasteners, or at too steep of an angle. Fasteners can ricochet causing personal injury. 16. Do not fire fasteners too close to the edge of a workpiece. They may split the workpiece and fly free, causing personal injury. SETUP 7. Respect the tool as a working implement. 23. Install an in-line shutoff valve to allow immediate control over the air supply in an emergency, even if a hose is ruptured. 10. Do not remove, tamper with, or otherwise cause the tool operating controls to become inoperable. 26. The warnings and precautions discussed in this manual cannot cover all possible conditions and situations that may occur. It must be understood by the operator that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator. 17. Keep clear of the workpiece near the area being fastened. Fasteners may bend sideways during firing, causing them to exit the workpiece at an unexpected point, causing personal injury. Item 69575 SAFETY 19. Hold tool away from head and body. During operation the tool may kick back causing injury. For technical questions, please call 1-800-444-3353. Page 5 OPERATION 2. Keep fingers away from trigger when not driving fasteners to avoid accidental firing. 18. Transport tool safely. Always disconnect air supply when moving the tool. Carry the tool by the handle and avoid contact with the trigger. MAINTENANCE 1. Operators and others in work area MUST wear ANSI-approved safety goggles with side shields during use. The employer is responsible to enforce the use of eye protection by the operator and others in the work area. Vibration Precautions SAFETY This tool vibrates during use. Repeated or long‑term exposure to vibration may cause temporary or permanent physical injury, particularly to the hands, arms and shoulders. To reduce the risk of vibration-related injury: 1. Anyone using vibrating tools regularly or for an extended period should first be examined by a doctor and then have regular medical check-ups to ensure medical problems are not being caused or worsened from use. Pregnant women or people who have impaired blood circulation to the hand, past hand injuries, nervous system disorders, diabetes, or Raynaud’s Disease should not use this tool. If you feel any symptoms related to vibration (such as tingling, numbness, and white or blue fingers), seek medical advice as soon as possible. 2. Do not smoke during use. Nicotine reduces the blood supply to the hands and fingers, increasing the risk of vibration-related injury. 3. Wear suitable gloves to reduce the vibration effects on the user. 4. Use tools with the lowest vibration when there is a choice between different processes. 5. Include vibration-free periods each day of work. 6. Grip tool as lightly as possible (while still keeping safe control of it). Let the tool do the work. 7. To reduce vibration, maintain tool as explained in this manual. If abnormal vibration occurs, stop immediately. SETUP SAVE THESE INSTRUCTIONS. OPERATION MAINTENANCE Page 6 For technical questions, please call 1-800-444-3353. Item 69575 Functional Description 70 –110 PSI Maximum Air Pressure 110 PSI Air Inlet 1/4"–18 NPT Air Consumption 1 CFM @ 90 PSI Safety Mechanism Type Full Sequential Nail Type 16 Gauge Finish Nail, 1" to 2-1/2" Magazine Capacity 100 MAINTENANCE OPERATION SETUP Operating Air Pressure SAFETY Specifications Item 69575 For technical questions, please call 1-800-444-3353. Page 7 Components and Controls Safety Nosepiece - Also called the workpiece contact, the Safety Nosepiece helps prevent the tool from firing unless it is pressed against an object. SAFETY Air Deflector Air Inlet Plug SETUP Trigger Magazine Depth Adjustment Knob Safety Nosepiece Pusher OPERATION MAINTENANCE Page 8 For technical questions, please call 1-800-444-3353. Item 69575 Initial Tool Set Up/Assembly Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this manual including all text under subheadings therein before set up or use of this product. SAFETY Note: For additional information regarding the parts listed in the following pages, refer to the Assembly Diagram near the end of this manual. Air Supply TO PREVENT EXPLOSION: Use only clean, dry, regulated, compressed air to power this tool. Do not use oxygen, carbon dioxide, combustible gases, or any other bottled gas as a power source for this tool. Note: This air tool may be shipped with a protective plug covering the air inlet. Remove this plug before set up. 2. Attach an air hose to the compressor’s air outlet. Connect the air hose to the air inlet of the tool. Other components, such as a coupler plug and quick coupler, will make operation more efficient, but are not required. WARNING! TO PREVENT SERIOUS INJURY FROM ACCIDENTAL OPERATION: Do not install a female quick coupler on the tool. Such a coupler contains an air valve that will allow the air tool to retain pressure and operate accidentally after the air supply is disconnected. Note: Air flow, and therefore tool performance, can be hindered by undersized air supply components. 3. The air hose must be long enough to reach the work area with enough extra length to allow free movement while working. Item 69575 SETUP 5. Close the in-line safety valve between the compressor and the tool. 6. Turn on the air compressor according to the manufacturer’s directions and allow it to build up pressure until it cycles off. 7. Adjust the air compressor’s output regulator so that the air output is enough to properly power the tool, but the output will not exceed the tool’s maximum air pressure at any time. Adjust the pressure gradually, while checking the air output gauge to set the right pressure range. 8. The air pressure setting must not exceed job site regulations/restrictions. The air pressure setting must not exceed 90 PSI when being used with workpieces that have a thickness of less than 1-3/4″. 9. Inspect the air connections for leaks. Repair any leaks found. 10. If the tool will not be used at this time, turn off and detach the air supply, safely discharge any residual air pressure, and release the trigger to prevent accidental operation. OPERATION Note: If an automatic oiler system is not used, add a few drops of Pneumatic Tool Oil into the airline connection before operation. Add a few more drops after each hour of continual use. 4. Release the tool’s trigger and empty its magazine. Note: Residual air pressure should not be present after the tool is disconnected from the air supply. However, it is a good safety measure to attempt to discharge the tool in a safe fashion after disconnecting to ensure that the tool is disconnected and unpowered. For technical questions, please call 1-800-444-3353. MAINTENANCE 1. Incorporate a filter, regulator with pressure gauge, oiler, in-line shutoff valve, and quick coupler for best service, as shown on Figure A on page 10 and Figure B on page 11. An in-line shutoff ball valve is an important safety device because it controls the air supply even if the air hose is ruptured. The shutoff valve should be a ball valve because it can be closed quickly. Page 9 Description Non-lubricated Tools A Air Hose Filter Regulator Lubricator (optional) Coupler and Plug Leader Hose (optional) Air Cleaner / Dryer (optional) Air Adjusting Valve (optional) MAINTENANCE A B C D E F G H OPERATION Lubricated Tools C SETUP B B C A Function A E E F H Connects air to tool Prevents dirt and condensation from damaging tool or workpiece Adjusts air pressure to tool For air tool lubrication Provides quick connection and release Increases coupler life Prevents water vapor from damaging workpiece For fine tuning airflow at tool G D Figure A: Portable Air Supply Setup SAFETY Page 10 For technical questions, please call 1-800-444-3353. Item 69575 Item 69575 For technical questions, please call 1-800-444-3353. Page 11 A B C D E F G H I J K L M N O F Description F E I I J K N OPERATION J H SETUP Function H L L M O SAFETY For noise and vibration reduction Secures air compressor in place Isolates sections of system for maintenance For vibration reduction Distributes air to branch lines To drain moisture from system Brings air to point of use Connects air to tool Prevents dirt and condensation from damaging tool or workpiece Adjusts air pressure to tool For air tool lubrication Provides quick connection and release Increases coupler life Prevents water vapor from damaging workpiece For fine tuning airflow at tool Non-lubricated Tools C C Vibration Pads Anchor Bolts Ball Valve Isolation Hose Main Air Line - 3/4″ minimum recommended Ball Valve Branch Air Line -1/2″ minimum recommended Air Hose Filter Regulator Lubricator (optional) Coupler and Plug Leader Hose (optional) Air Cleaner / Dryer (optional) Air Adjusting Valve (optional) B A MAINTENANCE B A C D G Lubricated Tools Slope Figure B: Stationary Air Supply Setup F Operating Instructions Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this manual including all text under subheadings therein before set up or use of this product. SAFETY Inspect tool before use, looking for damaged, loose, and missing parts. If any problems are found, do not use tool until repaired. Workpiece and Work Area Set Up 1. Designate a work area that is clean and well‑lit. The work area must not allow access by children or pets to prevent distraction and injury. 2. Route the air hose along a safe route to reach the work area without creating a tripping hazard or exposing the air hose to possible damage. The air hose must be long enough to reach the work area with enough extra length to allow free movement while working. 3. Secure loose workpieces using a vise or clamps (not included) to prevent movement while working. 4. There must not be hazardous objects (such as utility lines or foreign objects) nearby that will present a hazard while working. SETUP Full Sequential Safety Trip Mechanism Definition The full sequential safety trip mechanism is designed to prevent inadvertent firing. The tool should only fire if the Safety Nosepiece is pressed against the workpiece prior to pulling the Trigger. It should only fire again if both Trigger and Safety Nosepiece are released first, and then both are depressed again. The Tool should not fire if the Safety Nosepiece is not pressed against an object. Full Sequential Safety Trip Mechanism Testing Procedure OPERATION TO PREVENT SERIOUS INJURY FROM ACCIDENTAL OPERATION: Empty the tool before this procedure. Point the tool at a piece of scrap wood when testing. 1. Disconnect the tool from the air supply. 2. Empty the magazine of fasteners. 3. Check that the Trigger and the Safety Nosepiece move freely, without sticking. 4. Connect the air supply to the tool and set within the Operating Air Pressure indicated on the Specification chart. MAINTENANCE 5. Test the tool by pressing the Safety Nosepiece against the workpiece without pulling the Trigger. The tool must not cycle (fire). If it cycles (fires), stop immediately and have it repaired by a qualified service technician. Page 12 6. Hold the tool away or off of the workpiece. The Safety Nosepiece should return to its original position. Squeeze the Trigger. The tool must not cycle (fire). If the tool fires, stop immediately and have it repaired by a qualified service technician. 7. Press the Safety Nosepiece against the workpiece and squeeze the Trigger. The tool must cycle (fire) only once. Release the Trigger and squeeze it again. The tool must not cycle (fire). With the Trigger depressed, carefully lift the tool and press it against the workpiece again. The tool must not cycle (fire). If it fails to perform in the manner explained in bold, have it repaired by a qualified service technician. For technical questions, please call 1-800-444-3353. Item 69575 TO PREVENT SERIOUS INJURY FROM ACCIDENTAL OPERATION, BEFORE LOADING: • Wear ANSI-approved safety goggles with side shields. Other people in the work area must also wear ANSI-approved impact safety goggles with side shields. • Release the trigger. • Detach the air supply. • Attempt to fire the Tool into a piece of scrap wood to ensure that it is disconnected and is incapable of firing any fasteners. FIG . 6 16 Gauge Nail Strip Pusher Latch 2. Insert the fasteners into the top of the Magazine. NOTE: Load fasteners with the pointed ends facing downward. 3. Hold the Pusher in place while pressing the Pusher Latch, unlocking the Pusher. WARNING! The Pusher is spring-loaded and will forcefully move forward when released. Once the Pusher Latch is pressed, make sure to hold the Pusher in place, and then guide it up the back of the Magazine. Pusher Magazine SETUP 1. Pull the Pusher down until it locks into place at the back of the Magazine. SAFETY Loading the Tool Figure C: Nail Loading Detail 2. If an automatic oiler is not used, add a few drops of Pneumatic Tool Oil to the airline connection before use. Add a few drops more after each hour of continual use. WARNING! TO PREVENT SERIOUS INJURY: Keep second hand away from tool discharge area, especially if holding workpiece. Tool applies extreme force to fastener, and fasteners may deflect or fire in an unexpected direction. 5. If, at the maximum depth setting, the tool requires more force to accomplish the task, verify that the tool receives sufficient, unobstructed airflow (CFM) and increase the pressure (PSI) output of the regulator up to the maximum air pressure rating of this tool. CAUTION! TO PREVENT INJURY FROM TOOL OR ACCESSORY FAILURE: Do not exceed the tool’s maximum air pressure rating. If the tool still does not have sufficient force at maximum pressure and sufficient airflow, then a larger tool may be required. 6. After use, to prevent accidents: CAUTION! TO PREVENT INJURY: Do not hold tool near body while firing. Tool recoil can cause injury. a. Release the trigger. 3. Position tool at desired fastener location and depress the Safety Nosepiece fully against the workpiece. Squeeze the trigger to fire a fastener. c. Attempt to fire the Tool into a piece of scrap wood to ensure that it is disconnected and is incapable of firing any fasteners. 4. Adjust the Depth Adjustment Knob to control the firing depth. e. Clean external surfaces with clean, dry cloth. Item 69575 b. Detach the air supply. d. Release the trigger again. f. Store indoors out of children’s reach. For technical questions, please call 1-800-444-3353. Page 13 MAINTENANCE 1. Before each use, test the tool as directed in the prior section. OPERATION General Operating Instructions User-Maintenance Instructions Procedures not specifically explained in this manual must be performed only by a qualified technician. SAFETY TO PREVENT SERIOUS INJURY FROM ACCIDENTAL OPERATION, BEFORE ANY MAINTENANCE OR REPAIRS ARE DONE (including clearing jams): • Wear ANSI-approved safety goggles with side shields. Other people in the work area must also wear ANSI-approved impact safety goggles with side shields. • Release the trigger. • Detach the air supply. • Attempt to fire the Tool into a piece of scrap wood to ensure that it is disconnected and is incapable of firing any fasteners. • Empty the Magazine and leave the Pusher pulled back during service. The Pusher is spring‑loaded and may cause parts or a fastener to fly out of the Tool. SETUP TO PREVENT SERIOUS INJURY FROM TOOL FAILURE: Do not use damaged equipment. If abnormal noise, vibration, or leaking air is detected, have the problem corrected before further use. TO PREVENT EXPLOSION: Lubricate only with specified lubricants. Lubricate the air inlet using only pneumatic tool oil. Lubricate the internal mechanism using only white lithium grease. Other lubricants may damage the mechanism and may be highly flammable, causing an explosion. Note: These procedures are in addition to the regular checks and maintenance explained as part of the regular operation of the air-operated tool. 1. BEFORE EACH USE, inspect the general condition of the tool. Check for: • proper safety trip mechanism operation, • free safety nosepiece and trigger movement, OPERATION • loose hardware or housing, • misalignment or binding of moving parts, • cracked or broken parts, and 2. Daily - Air Supply Maintenance: Every day, perform maintenance on the air supply according to the component manufacturers' instructions. Maintain the lubricator's oil level. Drain the moisture filter regularly. Performing routine maintenance on the air supply will allow the tool to operate more safely and will also reduce wear on the tool. • any other condition that may affect its safe operation. MAINTENANCE Page 14 For technical questions, please call 1-800-444-3353. Item 69575 2. Press down on the Quick Release Lever at the top of the Magazine. 3. Carefully lift the Cover Plate off the Driver Guide and use pliers to remove any stuck fasteners from the jammed Nailer. 4. Inspect the Driver Guide for any bends or breakage. If it is damaged, do not use the Nailer until it is repaired by a qualified technician. 7. Pull out the jammed fastener and the remainder of the fastener strip from the magazine. Dispose of the remaining fastener strip; it is likely bent or damaged and may cause repeated jamming or damage to the tool if reused. 8. If the jam cannot be cleared using the methods above, have the tool serviced by a qualified technician. FIG . 11 Quick Release Lever 5. Lightly oil the Driver Guide and replace the Cover Plate. Place the Latch under the hooks on the Driver Guide and pull up on the Quick Release Lever, locking the Cover Plate in place. Latch 6. If a fastener is jammed in the magazine, pull the Pusher all the way back to the engaged position. Use a screwdriver to release the jammed fastener by probing the openings in the magazine. Cover Plate Driver Guide MAINTENANCE Figure D: Driver Guide and Cover Plate Detail OPERATION 1. WARNING! Hold the Nailer pointed away from you and any other people or fragile objects. HOLD THE PUSHER BACK DURING THIS OPERATION AND BE CAREFUL NOT TO BUMP THE LATCH. SETUP TO PREVENT SERIOUS INJURY FROM ACCIDENTAL OPERATION, BEFORE ANY MAINTENANCE OR REPAIRS ARE DONE (including clearing jams): • Wear ANSI-approved safety goggles with side shields. Other people in the work area must also wear ANSI-approved impact safety goggles with side shields. • Release the trigger. • Detach the air supply. • Attempt to fire the Tool into a piece of scrap wood to ensure that it is disconnected and is incapable of firing any fasteners. • Empty the Magazine and leave the Pusher pulled back during service. The Pusher is spring‑loaded and may cause parts or a fastener to fly out of the Tool. SAFETY Clearing Jams Item 69575 For technical questions, please call 1-800-444-3353. Page 15 Troubleshooting Problem Insufficient fastener depth. Possible Causes 1. Incorrect tool depth setting. 2. Not enough air pressure. SAFETY 3. Incorrect lubrication or not enough lubrication. 4. Blocked air inlet screen (if equipped). 5. Mechanism contaminated. Likely Solutions 1. Adjust depth setting, if available. 2. Check for loose connections and make sure that air supply is providing enough air pressure (PSI) to the tool’s air inlet. Do not exceed maximum air pressure. 3. Lubricate using air tool oil and grease according to directions. 4. Clean air inlet screen of buildup. 5. Have qualified technician clean and lubricate mechanism. Install in-line filter in air supply as stated in Initial Set Up: Air Supply. SETUP Fasteners drive too deeply. 1. Incorrect tool depth setting. 2. Too much air pressure. 1. Adjust depth setting, if available. 2. Reduce air supply pressure (PSI). Tool cycles without firing fastener. 1. Jammed fastener. 1. Clear jammed fastener according to Clearing Jams instructions. 2. Reload with correct fasteners. 3. Empty, then reload with correct fasteners. 4. Clean and lubricate magazine and pusher. Frequent jamming. 2. Tool empty. 3. Incorrect fasteners used. 4. Magazine dirty or not lubricated properly. 5. Insufficient air flow. Incorrect nail type. OPERATION Severe air 1. Cross‑threaded housing leakage. components. (Slight air leakage is normal, 2. Loose housing. especially on older tools.) 3. Damaged valve or housing. 4. Dirty, worn or damaged valve. 5. Check for loose connections and make sure that air supply is providing enough air flow (CFM) and pressure (PSI) to the tool’s air inlet. Do not exceed maximum air pressure. Confirm nail collation type, diameter, angle, type, and length. Correct as needed. 1. Check for incorrect alignment and uneven gaps. If cross-threaded, disassemble and replace damaged parts before use. 2. Tighten housing assembly. If housing cannot tighten properly, internal parts may be misaligned. 3. Replace damaged components. 4. Clean or replace valve assembly. Follow all safety precautions whenever diagnosing or servicing the tool. Disconnect air supply before service. MAINTENANCE Page 16 For technical questions, please call 1-800-444-3353. Item 69575 Parts List and Diagram MAINTENANCE OPERATION SETUP THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS, AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO. SAFETY PLEASE READ THE FOLLOWING CAREFULLY Item 69575 For technical questions, please call 1-800-444-3353. Page 17 Parts List and Diagram Parts List SAFETY Part SETUP OPERATION 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 Description Set Screw Air Deflector O-Ring O-Ring Hex Bolt Spring Washer Air Cap Seal Spring O-Ring Head Valve Piston O-Ring Gasket Lining Ring O-Ring O-Ring Driver Blade Unit O-Ring Cylinder O-Ring Bumper Body Nozzle Safety Guide Safety Guide Pin Spring Depth Control Guide Body Depth Adjustment Knob Lock Nut Safety Nosepiece No-Mar Tip Switch Unit Spring Trigger Plate Pin Trigger Plate Trigger Trigger Pin Qty 1 1 1 1 6 1 1 1 1 3 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 1 1 1 4 1 1 1 1 2 1 1 1 Part 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 Description O-Ring Set Screw Driver Guide Cover Spring Baffle Board Driver Guide Set Plate Cover Plate Hand Grip Quick Release Lever Quick Release Lever Pin Latch E-Ring Pin Spring Pusher Support Pusher Latch Nail Guide Plate Magazine Hex Bolt Set Screw Rear Cover Rear Cover Pin Clapboard Pin Clapboard Hex Bolt Tail Hanger Hex Bolt Lock Nut Head Grip Gasket C-Ring Filter End Cap Hex Bolt Air Plug Qty 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 1 2 1 1 1 2 1 2 1 1 1 1 1 1 1 1 3 1 MAINTENANCE Record Product’s Serial Number Here: Note: If product has no serial number, record month and year of purchase instead. Note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. Page 18 For technical questions, please call 1-800-444-3353. Item 69575 MAINTENANCE OPERATION SETUP SAFETY Assembly Diagram Item 69575 For technical questions, please call 1-800-444-3353. Page 19 Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase. This warranty does not apply to damage due directly or indirectly, to misuse, abuse, negligence or accidents, repairs or alterations outside our facilities, criminal activity, improper installation, normal wear and tear, or to lack of maintenance. We shall in no event be liable for death, injuries to persons or property, or for incidental, contingent, special or consequential damages arising from the use of our product. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation of exclusion may not apply to you. THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS. To take advantage of this warranty, the product or part must be returned to us with transportation charges prepaid. Proof of purchase date and an explanation of the complaint must accompany the merchandise. If our inspection verifies the defect, we will either repair or replace the product at our election or we may elect to refund the purchase price if we cannot readily and quickly provide you with a replacement. We will return repaired products at our expense, but if we determine there is no defect, or that the defect resulted from causes not within the scope of our warranty, then you must bear the cost of returning the product. This warranty gives you specific legal rights and you may also have other rights which vary from state to state. 3491 Mission Oaks Blvd. • PO Box 6009 • Camarillo, CA 93011 • (800) 444-3353
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:08:23 Instance ID : uuid:f63dad30-9209-cc4c-99a4-99a9fb1d0532 Document ID : xmp.did:ABB18C500D2068118C14FA4ADF48AFCF Original Document ID : adobe:docid:indd:8e9fe4f7-95b2-11df-a014-dff7e2464c4c Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:E65D82E90C2068118C14FA4ADF48AFCF Derived From Document ID : xmp.did:3EC9ABD71520681180838222913CD650 Derived From Original Document ID: adobe:docid:indd:8e9fe4f7-95b2-11df-a014-dff7e2464c4c Derived From Rendition Class : default History Action : saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved History Instance ID : xmp.iid:C262504B0D2068118083DC2F551A7664, xmp.iid:C362504B0D2068118083DC2F551A7664, xmp.iid:0780117407206811808390BB7C4A4802, xmp.iid:0880117407206811808390BB7C4A4802, xmp.iid:5FF4E53E10206811808390BB7C4A4802, xmp.iid:61F4E53E10206811808390BB7C4A4802, xmp.iid:64F4E53E10206811808390BB7C4A4802, xmp.iid:65F4E53E10206811808390BB7C4A4802, xmp.iid:66F4E53E10206811808390BB7C4A4802, xmp.iid:F92F771418206811808390BB7C4A4802, xmp.iid:FA2F771418206811808390BB7C4A4802, xmp.iid:FC2F771418206811808390BB7C4A4802, xmp.iid:FD2F771418206811808390BB7C4A4802, xmp.iid:FE2F771418206811808390BB7C4A4802, xmp.iid:401005E0182068118C14CAD8809588E8, xmp.iid:0A801174072068118C14BA65548CDAF4, xmp.iid:E0BB81BF112068118C14BA65548CDAF4, xmp.iid:E1BB81BF112068118C14BA65548CDAF4, xmp.iid:E2BB81BF112068118C14BA65548CDAF4, xmp.iid:E3BB81BF112068118C14BA65548CDAF4, xmp.iid:E4BB81BF112068118C14BA65548CDAF4, xmp.iid:E8BB81BF112068118C14BA65548CDAF4, xmp.iid:76C45FC0162068118C14BA65548CDAF4, xmp.iid:77C45FC0162068118C14BA65548CDAF4, xmp.iid:7AC45FC0162068118C14BA65548CDAF4, xmp.iid:38D019CD1420681180839D99F3060A4F, xmp.iid:3BD019CD1420681180839D99F3060A4F, xmp.iid:573EA8951720681180839D99F3060A4F, xmp.iid:5A3EA8951720681180839D99F3060A4F, xmp.iid:5D3EA8951720681180839D99F3060A4F, xmp.iid:5E3EA8951720681180839D99F3060A4F, xmp.iid:5F3EA8951720681180839D99F3060A4F, xmp.iid:730470B31820681180839D99F3060A4F, xmp.iid:760470B31820681180839D99F3060A4F, xmp.iid:770470B31820681180839D99F3060A4F, xmp.iid:487A3F1B1D20681180839D99F3060A4F, xmp.iid:497A3F1B1D20681180839D99F3060A4F, xmp.iid:008DAC432720681180839D99F3060A4F, xmp.iid:038DAC432720681180839D99F3060A4F, xmp.iid:048DAC432720681180839D99F3060A4F, xmp.iid:E9E1443D352068118C14FB08BA0B5CAA, xmp.iid:9AA2701B3F2068118083AE5679EB626E, xmp.iid:9DA2701B3F2068118083AE5679EB626E, xmp.iid:FC1F47C4232068118083DD13B10FA5BD, xmp.iid:FF1F47C4232068118083DD13B10FA5BD, xmp.iid:002047C4232068118083DD13B10FA5BD, xmp.iid:6AE2175B292068118083F162B62867F2, xmp.iid:6BE2175B292068118083F162B62867F2, xmp.iid:7D552963182068118C149F2DBC28C477, xmp.iid:05DD8C93102068118C14E7314E749540, xmp.iid:09801174072068118083F542CBF19F50, xmp.iid:8B52AC86072068118083F542CBF19F50, xmp.iid:B51013B3362068118C14B9A1E01394C7, xmp.iid:83E942CA362068118C14B9A1E01394C7, xmp.iid:4F88DC24102068118C14805A0B7820BD, xmp.iid:F3ABBD43102068118C14805A0B7820BD, xmp.iid:F8ABBD43102068118C14805A0B7820BD, xmp.iid:C0ED797F102068118C14805A0B7820BD, xmp.iid:C1ED797F102068118C14805A0B7820BD, xmp.iid:C4ED797F102068118C14805A0B7820BD, xmp.iid:C5ED797F102068118C14805A0B7820BD, xmp.iid:C8ED797F102068118C14805A0B7820BD, xmp.iid:64A838F8102068118C14805A0B7820BD, xmp.iid:67A838F8102068118C14805A0B7820BD, xmp.iid:6AA838F8102068118C14805A0B7820BD, xmp.iid:6DA838F8102068118C14805A0B7820BD, xmp.iid:4BDD0C3B112068118C14805A0B7820BD, xmp.iid:4EDD0C3B112068118C14805A0B7820BD, xmp.iid:4FDD0C3B112068118C14805A0B7820BD, xmp.iid:52DD0C3B112068118C14805A0B7820BD, xmp.iid:E28273A5112068118C14805A0B7820BD, xmp.iid:E58273A5112068118C14805A0B7820BD, xmp.iid:E88273A5112068118C14805A0B7820BD, xmp.iid:EB8273A5112068118C14805A0B7820BD, xmp.iid:0F377B21122068118C14805A0B7820BD, xmp.iid:12377B21122068118C14805A0B7820BD, xmp.iid:15377B21122068118C14805A0B7820BD, xmp.iid:9670539D2A2068118C14C3204022CCF0, xmp.iid:7485F1CF342068118A6DEE22372196AB, xmp.iid:7785F1CF342068118A6DEE22372196AB, xmp.iid:6306B6CB362068118A6DEE22372196AB, xmp.iid:6606B6CB362068118A6DEE22372196AB, xmp.iid:6906B6CB362068118A6DEE22372196AB, xmp.iid:6C06B6CB362068118A6DEE22372196AB, xmp.iid:5AC58406372068118A6DEE22372196AB, xmp.iid:5BC58406372068118A6DEE22372196AB, xmp.iid:5CC58406372068118A6DEE22372196AB, xmp.iid:5FC58406372068118A6DEE22372196AB, xmp.iid:62C58406372068118A6DEE22372196AB, xmp.iid:B60DB26A382068118A6DEE22372196AB, xmp.iid:B90DB26A382068118A6DEE22372196AB, xmp.iid:BC0DB26A382068118A6DEE22372196AB, xmp.iid:A0FC0C11392068118A6DEE22372196AB, xmp.iid:A3FC0C11392068118A6DEE22372196AB, xmp.iid:A6FC0C11392068118A6DEE22372196AB, xmp.iid:A9FC0C11392068118A6DEE22372196AB, xmp.iid:9D1E2044392068118A6DEE22372196AB, xmp.iid:A01E2044392068118A6DEE22372196AB, xmp.iid:A31E2044392068118A6DEE22372196AB, xmp.iid:A61E2044392068118A6DEE22372196AB, xmp.iid:7ED485473A2068118A6DEE22372196AB, xmp.iid:81D485473A2068118A6DEE22372196AB, xmp.iid:84D485473A2068118A6DEE22372196AB, xmp.iid:CA9501993A2068118A6DEE22372196AB, xmp.iid:CD9501993A2068118A6DEE22372196AB, xmp.iid:D09501993A2068118A6DEE22372196AB, xmp.iid:D39501993A2068118A6DEE22372196AB, xmp.iid:D49501993A2068118A6DEE22372196AB, xmp.iid:A80F29703B2068118A6DEE22372196AB, xmp.iid:AB0F29703B2068118A6DEE22372196AB, xmp.iid:AE0F29703B2068118A6DEE22372196AB, xmp.iid:40A8D6703C2068118A6DEE22372196AB, xmp.iid:43A8D6703C2068118A6DEE22372196AB, xmp.iid:46A8D6703C2068118A6DEE22372196AB, xmp.iid:49A8D6703C2068118A6DEE22372196AB, xmp.iid:CB5DEAE53C2068118A6DEE22372196AB, xmp.iid:CE5DEAE53C2068118A6DEE22372196AB, xmp.iid:D15DEAE53C2068118A6DEE22372196AB, xmp.iid:D45DEAE53C2068118A6DEE22372196AB, xmp.iid:D01BB9C1482068118A6DEE22372196AB, xmp.iid:D31BB9C1482068118A6DEE22372196AB, xmp.iid:D61BB9C1482068118A6DEE22372196AB, xmp.iid:60EF3327492068118A6DEE22372196AB, xmp.iid:64EF3327492068118A6DEE22372196AB, xmp.iid:67EF3327492068118A6DEE22372196AB, xmp.iid:63E62B7B492068118A6DEE22372196AB, xmp.iid:3B38384D142068118083DFDDFD0DE0A9, xmp.iid:3E38384D142068118083DFDDFD0DE0A9, xmp.iid:F6721F75142068118083DFDDFD0DE0A9, xmp.iid:E3D8E68B212068118C1494274E5A86E7, xmp.iid:D8843AC8252068118C1494274E5A86E7, xmp.iid:725CBE23152068118083825729089213, xmp.iid:755CBE23152068118083825729089213, xmp.iid:3C7552541C2068118C149261D8AF601F, xmp.iid:DB862B624F2068118C149261D8AF601F, xmp.iid:FAD2A007172068118083B3AF141491B5, xmp.iid:FDD2A007172068118083B3AF141491B5, xmp.iid:91CACCD0492068118083C3064E5CD25D, xmp.iid:5A112529122068118083CF90C934D009, xmp.iid:0D7851301B2068118083CF90C934D009, xmp.iid:117851301B2068118083CF90C934D009, xmp.iid:AF01CBDA1B2068118083CF90C934D009, xmp.iid:79E53C21082068118C148A62131A2E25, xmp.iid:5128C05B362068118C14CA4C2473D6C7, xmp.iid:AD439955372068118C14CA4C2473D6C7, xmp.iid:22C6ACBA182068118C148AA619833E0B, xmp.iid:26C6ACBA182068118C148AA619833E0B, xmp.iid:84F7D2FA182068118C148AA619833E0B, xmp.iid:F63585A80B2068118C149A0305A5F17E, xmp.iid:623648D8262068118083D20FDD7807F1, xmp.iid:EAF015551D2068118C14E1FE5B2D360F, xmp.iid:42D5CF41082068118083A844F748EADD, xmp.iid:8FEA5FF5082068118083A844F748EADD, xmp.iid:0D7DDEAE432068118083C1C654EB7AB3, xmp.iid:117DDEAE432068118083C1C654EB7AB3, xmp.iid:300E52BD432068118083C1C654EB7AB3, xmp.iid:340E52BD432068118083C1C654EB7AB3, xmp.iid:B9C29235472068118083C1C654EB7AB3, xmp.iid:70D8560E1E2068118083BE0CA8B86D76, xmp.iid:AA5211CE2F2068118083E5CC88EF1A80, xmp.iid:AE5211CE2F2068118083E5CC88EF1A80, xmp.iid:04801174072068118C14917641D1EA14, xmp.iid:05801174072068118C14917641D1EA14, xmp.iid:06801174072068118C14917641D1EA14, xmp.iid:07801174072068118C14917641D1EA14, xmp.iid:08801174072068118C14917641D1EA14, xmp.iid:09801174072068118C14917641D1EA14, xmp.iid:6E66C5270F2068118083CC49D8BBEEF3, xmp.iid:531AA20D2D20681180838E2804A25191, xmp.iid:571AA20D2D20681180838E2804A25191, xmp.iid:5B1AA20D2D20681180838E2804A25191, xmp.iid:6C3DBB5E2D20681180838E2804A25191, xmp.iid:703DBB5E2D20681180838E2804A25191, xmp.iid:743DBB5E2D20681180838E2804A25191, xmp.iid:3FA1DB942D20681180838E2804A25191, xmp.iid:43A1DB942D20681180838E2804A25191, xmp.iid:904A11C62D20681180838E2804A25191, xmp.iid:944A11C62D20681180838E2804A25191, xmp.iid:984A11C62D20681180838E2804A25191, xmp.iid:FA7F1174072068118083E9F626FA5168, xmp.iid:FE7F1174072068118083E9F626FA5168, xmp.iid:292F6C88072068118083E9F626FA5168, xmp.iid:2D2F6C88072068118083E9F626FA5168, xmp.iid:312F6C88072068118083E9F626FA5168, xmp.iid:D7AE5DD2082068118083E9F626FA5168, xmp.iid:A0EF9258092068118083E9F626FA5168, xmp.iid:4941976A092068118083E9F626FA5168, xmp.iid:4A41976A092068118083E9F626FA5168, xmp.iid:4E41976A092068118083E9F626FA5168, xmp.iid:4F41976A092068118083E9F626FA5168, xmp.iid:5041976A092068118083E9F626FA5168, xmp.iid:072B45050A2068118083E9F626FA5168, xmp.iid:1CC9B5600A2068118083E9F626FA5168, xmp.iid:1DC9B5600A2068118083E9F626FA5168, xmp.iid:153FF6521420681180838222913CD650, xmp.iid:3EC9ABD71520681180838222913CD650, xmp.iid:3FC9ABD71520681180838222913CD650, xmp.iid:40C9ABD71520681180838222913CD650, xmp.iid:41C9ABD71520681180838222913CD650, xmp.iid:45C9ABD71520681180838222913CD650, xmp.iid:004B25E61720681180838222913CD650, xmp.iid:044B25E61720681180838222913CD650, xmp.iid:084B25E61720681180838222913CD650, xmp.iid:874A87851820681180838222913CD650, xmp.iid:8B4A87851820681180838222913CD650, xmp.iid:3F9FAB461920681180838222913CD650, xmp.iid:439FAB461920681180838222913CD650, xmp.iid:5403E0211A20681180838222913CD650, xmp.iid:5803E0211A20681180838222913CD650, xmp.iid:5C03E0211A20681180838222913CD650, xmp.iid:04801174072068118C14E5CF34CDA14C, xmp.iid:08801174072068118C14E5CF34CDA14C, xmp.iid:231B2A8F0C2068118C14E5CF34CDA14C, xmp.iid:271B2A8F0C2068118C14E5CF34CDA14C, xmp.iid:2B1B2A8F0C2068118C14E5CF34CDA14C, xmp.iid:AE9A5E8C0D2068118C14E5CF34CDA14C, xmp.iid:B29A5E8C0D2068118C14E5CF34CDA14C, xmp.iid:B69A5E8C0D2068118C14E5CF34CDA14C, xmp.iid:E71862DF092068118C14FA4ADF48AFCF, xmp.iid:F231CD820C2068118C14FA4ADF48AFCF, xmp.iid:F631CD820C2068118C14FA4ADF48AFCF, xmp.iid:FA31CD820C2068118C14FA4ADF48AFCF, xmp.iid:DD5D82E90C2068118C14FA4ADF48AFCF, xmp.iid:E15D82E90C2068118C14FA4ADF48AFCF, xmp.iid:E55D82E90C2068118C14FA4ADF48AFCF, xmp.iid:E65D82E90C2068118C14FA4ADF48AFCF, xmp.iid:ABB18C500D2068118C14FA4ADF48AFCF, xmp.iid:7194F74D242068118083BBE64D1DF859, xmp.iid:7594F74D242068118083BBE64D1DF859, xmp.iid:12978577252068118083BBE64D1DF859, xmp.iid:13978577252068118083BBE64D1DF859, xmp.iid:17978577252068118083BBE64D1DF859, xmp.iid:1B978577252068118083BBE64D1DF859, xmp.iid:B6041A92272068118083BBE64D1DF859, xmp.iid:BA041A92272068118083BBE64D1DF859, xmp.iid:889708E9082068118083C3D102C92225, xmp.iid:71D7FB110A2068118083C3D102C92225, xmp.iid:922AAA2C122068118C14B6233C44AC70, xmp.iid:AEEE2C5B1A2068118C14B6233C44AC70, xmp.iid:2B17AD81242068118C14B6233C44AC70, xmp.iid:3017AD81242068118C14B6233C44AC70, xmp.iid:187E1F58272068118C14B6233C44AC70, xmp.iid:48C91A0D0B2068118083BFB50086146C, xmp.iid:449270C30B2068118083BFB50086146C, xmp.iid:499270C30B2068118083BFB50086146C, xmp.iid:8D0874270C2068118083BFB50086146C, xmp.iid:920874270C2068118083BFB50086146C, xmp.iid:0CEBA0510C2068118083BFB50086146C, xmp.iid:11EBA0510C2068118083BFB50086146C, xmp.iid:390915900D2068118083BFB50086146C, xmp.iid:3E0915900D2068118083BFB50086146C, xmp.iid:5A74B9580E2068118083BFB50086146C, xmp.iid:2DFB9EEA0E2068118083BFB50086146C, xmp.iid:1886F60C0F2068118083BFB50086146C, xmp.iid:128A73C20F2068118083BFB50086146C, xmp.iid:188A73C20F2068118083BFB50086146C, xmp.iid:7C3FEFA8102068118083BFB50086146C, xmp.iid:B7AAF8F2102068118083BFB50086146C, xmp.iid:7E3ACFB4162068118083BFB50086146C, xmp.iid:883ACFB4162068118083BFB50086146C, xmp.iid:97F780DA172068118083BFB50086146C, xmp.iid:9B414DEF192068118083BFB50086146C, xmp.iid:A0414DEF192068118083BFB50086146C, xmp.iid:50FD6C161B2068118083BFB50086146C, xmp.iid:0E7D5816212068118083BFB50086146C, xmp.iid:137D5816212068118083BFB50086146C, xmp.iid:575FA458232068118083BFB50086146C, xmp.iid:E80BF884232068118083BFB50086146C, xmp.iid:ED0BF884232068118083BFB50086146C, xmp.iid:0CECF8E8272068118083BFB50086146C, xmp.iid:6D742A6B282068118083BFB50086146C, xmp.iid:74742A6B282068118083BFB50086146C, xmp.iid:D438B8AB282068118083BFB50086146C, xmp.iid:6BD216BA2A2068118083BFB50086146C, xmp.iid:863D94452B2068118083BFB50086146C, xmp.iid:8D3D94452B2068118083BFB50086146C, xmp.iid:1D660B851E20681180839C32FB888EEB, xmp.iid:A29630471F20681180839C32FB888EEB, xmp.iid:7E5D2A7E1F20681180839C32FB888EEB, xmp.iid:03B989EA2020681180839C32FB888EEB, xmp.iid:A5E390A80E2068118083BB22B374958C, xmp.iid:C83B9ABC3A2068118083A84F73CE422A, xmp.iid:12D6CD153B2068118083A84F73CE422A, xmp.iid:978951C53F2068118083A84F73CE422A, xmp.iid:9F8951C53F2068118083A84F73CE422A, xmp.iid:CE4D3D78432068118083A84F73CE422A, xmp.iid:FAB53FC1432068118083A84F73CE422A, xmp.iid:FBB53FC1432068118083A84F73CE422A, xmp.iid:D9A72EA0492068118083A84F73CE422A, xmp.iid:FF7F1174072068118083F7BF7A6CBA1D, xmp.iid:FA4FD3760D2068118083F7BF7A6CBA1D, xmp.iid:ADA10D090E2068118083F7BF7A6CBA1D, xmp.iid:9C4AC3780E2068118083F7BF7A6CBA1D, xmp.iid:6B40E7ED0E2068118083F7BF7A6CBA1D, xmp.iid:560ED080102068118083F7BF7A6CBA1D, xmp.iid:AD7D87A7102068118083F7BF7A6CBA1D, xmp.iid:D8937D14112068118083F7BF7A6CBA1D, xmp.iid:91D06B1B112068118083F7BF7A6CBA1D, xmp.iid:92D06B1B112068118083F7BF7A6CBA1D, xmp.iid:4D6D0BA6152068118083F7BF7A6CBA1D, xmp.iid:58AE5710172068118083F7BF7A6CBA1D, xmp.iid:62AE5710172068118083F7BF7A6CBA1D, xmp.iid:29AFE05C1E2068118083F7BF7A6CBA1D, xmp.iid:A4E832B91E2068118083F7BF7A6CBA1D, xmp.iid:89A004F81F2068118083F7BF7A6CBA1D, xmp.iid:40E45212202068118083F7BF7A6CBA1D, xmp.iid:41E45212202068118083F7BF7A6CBA1D, xmp.iid:D8B9A1BB232068118083F7BF7A6CBA1D, xmp.iid:2FFDA582262068118083F7BF7A6CBA1D, xmp.iid:B617A620272068118083F7BF7A6CBA1D, xmp.iid:C91F504F282068118083F7BF7A6CBA1D, xmp.iid:1AF969FA282068118083F7BF7A6CBA1D, xmp.iid:1BF969FA282068118083F7BF7A6CBA1D, xmp.iid:1CF969FA282068118083F7BF7A6CBA1D, xmp.iid:372FD7D6322068118083F7BF7A6CBA1D, xmp.iid:B07361FA342068118083F7BF7A6CBA1D, xmp.iid:42ABF1FB202068118C14D345AC46EE74, xmp.iid:43ABF1FB202068118C14D345AC46EE74, xmp.iid:D2AC8EA4212068118C14D345AC46EE74, xmp.iid:25CD8B64222068118C14D345AC46EE74, xmp.iid:4ABD6CAD232068118C14D345AC46EE74, xmp.iid:6F839B8B252068118C14D345AC46EE74, xmp.iid:923803F0252068118C14D345AC46EE74, xmp.iid:8F7D68D8262068118C14D345AC46EE74, xmp.iid:C404FD3F272068118C14D345AC46EE74, xmp.iid:D33CF87E272068118C14D345AC46EE74, xmp.iid:7A88CB66282068118C14D345AC46EE74, xmp.iid:8488CB66282068118C14D345AC46EE74, xmp.iid:F598C45D292068118C14D345AC46EE74, xmp.iid:6E72E6322A2068118C14D345AC46EE74, xmp.iid:C3FE95732A2068118C14D345AC46EE74, xmp.iid:AA2274EB2E2068118C14D345AC46EE74, xmp.iid:AB2274EB2E2068118C14D345AC46EE74, xmp.iid:46F90E38362068118C14D345AC46EE74, xmp.iid:4E3B8D14372068118C14D345AC46EE74, xmp.iid:19041B740720681180838436A1AD170E, xmp.iid:D06132420920681180838436A1AD170E, xmp.iid:C11A918A0920681180838436A1AD170E, xmp.iid:387A44451620681180838436A1AD170E, xmp.iid:7190D9701620681180838436A1AD170E, xmp.iid:3CA34ECE1620681180838436A1AD170E, xmp.iid:65C352D01820681180838436A1AD170E, xmp.iid:F4369F2B1A20681180838436A1AD170E, xmp.iid:1D9D4D5D1A20681180838436A1AD170E, xmp.iid:6A9C6D191B20681180838436A1AD170E, xmp.iid:62CB28411B20681180838436A1AD170E, xmp.iid:63C780653120681180838436A1AD170E, xmp.iid:D2B9785E3220681180838436A1AD170E, xmp.iid:65BFB4D23220681180838436A1AD170E, xmp.iid:C169E56A3320681180838436A1AD170E, xmp.iid:C269E56A3320681180838436A1AD170E, xmp.iid:02E5B4ED0B2068118083C322F1295590 History When : 2010:10:05 10:14:35-07:00, 2010:10:05 10:14:35-07:00, 2010:10:29 09:39:12-07:00, 2010:10:29 09:39:12-07:00, 2010:10:29 10:19:37-07:00, 2010:10:29 10:20:26-07:00, 2010:10:29 10:37:33-07:00, 2010:10:29 10:44:23-07:00, 2010:10:29 10:51:02-07:00, 2010:10:29 10:51:41-07:00, 2010:10:29 10:54:30-07:00, 2010:10:29 11:36:12-07:00, 2010:10:29 11:39:08-07:00, 2010:10:29 11:58:09-07:00, 2010:12:20 10:06:02-08:00, 2010:12:21 09:35:25-08:00, 2010:12:21 09:58:50-08:00, 2010:12:21 10:08:30-08:00, 2010:12:21 10:11:31-08:00, 2010:12:21 10:15:36-08:00, 2010:12:21 10:16:55-08:00, 2010:12:21 10:29:35-08:00, 2010:12:21 10:34:39-08:00, 2010:12:21 10:35:02-08:00, 2010:12:21 10:35:02-08:00, 2010:12:22 10:06:54-08:00, 2010:12:22 10:07:56-08:00, 2010:12:22 10:08:53-08:00, 2010:12:22 10:10:26-08:00, 2010:12:22 10:10:49-08:00, 2010:12:22 10:15:48-08:00, 2010:12:22 10:15:48-08:00, 2010:12:22 10:16:52-08:00, 2010:12:22 10:17:29-08:00, 2010:12:22 10:17:29-08:00, 2010:12:22 10:48:24-08:00, 2010:12:22 10:48:24-08:00, 2010:12:22 12:08:30-08:00, 2010:12:22 12:08:36-08:00, 2010:12:22 12:08:36-08:00, 2011:01:04 14:25:19-08:00, 2011:04:27 14:56:32-07:00, 2011:04:27 14:56:50-07:00, 2011:05:19 12:39-07:00, 2011:05:19 12:39:08-07:00, 2011:05:19 12:39:08-07:00, 2011:06:14 13:21:51-07:00, 2011:06:14 13:21:51-07:00, 2011:08:08 11:29:38-07:00, 2011:08:22 10:48:14-07:00, 2011:08:23 08:12:52-07:00, 2011:08:23 08:12:52-07:00, 2011:08:25 14:08:50-07:00, 2011:08:25 14:09:45-07:00, 2011:09:05 16:10:01-07:00, 2011:09:05 16:10:17-07:00, 2011:09:05 16:11:34-07:00, 2011:09:05 16:11:57-07:00, 2011:09:05 16:12:57-07:00, 2011:09:05 16:13:01-07:00, 2011:09:05 16:14:32-07:00, 2011:09:05 16:14:48-07:00, 2011:09:05 16:15:20-07:00, 2011:09:05 16:15:54-07:00, 2011:09:05 16:16:22-07:00, 2011:09:05 16:16:45-07:00, 2011:09:05 16:17:12-07:00, 2011:09:05 16:17:21-07:00, 2011:09:05 16:18:17-07:00, 2011:09:05 16:19:05-07:00, 2011:09:05 16:20:11-07:00, 2011:09:05 16:20:41-07:00, 2011:09:05 16:21:17-07:00, 2011:09:05 16:22:44-07:00, 2011:09:05 16:23:39-07:00, 2011:09:05 16:24:23-07:00, 2011:09:05 16:27:26-07:00, 2011:09:13 16:47:22-07:00, 2011:09:14 14:10:47-07:00, 2011:09:14 14:12:14-07:00, 2011:09:14 14:12:39-07:00, 2011:09:14 14:12:42-07:00, 2011:09:14 14:12:50-07:00, 2011:09:14 14:13:05-07:00, 2011:09:14 14:14:18-07:00, 2011:09:14 14:14:44-07:00, 2011:09:14 14:18:44-07:00, 2011:09:14 14:22:02-07:00, 2011:09:14 14:23:52-07:00, 2011:09:14 14:24:16-07:00, 2011:09:14 14:24:38-07:00, 2011:09:14 14:27:51-07:00, 2011:09:14 14:28:55-07:00, 2011:09:14 14:29:23-07:00, 2011:09:14 14:29:37-07:00, 2011:09:14 14:30:14-07:00, 2011:09:14 14:30:20-07:00, 2011:09:14 14:30:44-07:00, 2011:09:14 14:36:19-07:00, 2011:09:14 14:37:27-07:00, 2011:09:14 14:37:36-07:00, 2011:09:14 14:38:06-07:00, 2011:09:14 14:39:10-07:00, 2011:09:14 14:39:52-07:00, 2011:09:14 14:40:47-07:00, 2011:09:14 14:40:53-07:00, 2011:09:14 14:41:19-07:00, 2011:09:14 14:45:14-07:00, 2011:09:14 14:45:53-07:00, 2011:09:14 14:47:39-07:00, 2011:09:14 14:49:43-07:00, 2011:09:14 14:53:04-07:00, 2011:09:14 14:53:28-07:00, 2011:09:14 14:54:20-07:00, 2011:09:14 14:55:38-07:00, 2011:09:14 14:56:20-07:00, 2011:09:14 14:58:40-07:00, 2011:09:14 15:56:51-07:00, 2011:09:14 16:21:02-07:00, 2011:09:14 16:21:14-07:00, 2011:09:14 16:21:23-07:00, 2011:09:14 16:22:30-07:00, 2011:09:14 16:24:04-07:00, 2011:09:14 16:24:21-07:00, 2011:09:14 16:24:21-07:00, 2011:09:14 16:27:02-07:00, 2011:09:15 09:10:03-07:00, 2011:09:15 09:10:10-07:00, 2011:09:15 09:12:32-07:00, 2011:10:10 12:31:03-07:00, 2011:10:10 12:54:16-07:00, 2011:10:19 15:38:27-07:00, 2011:10:19 15:42:27-07:00, 2011:10:27 09:39:37-07:00, 2011:10:27 15:44:48-07:00, 2011:11:22 10:24:34-08:00, 2011:11:22 10:24:48-08:00, 2011:11:25 14:56:18-08:00, 2011:12:01 09:21:31-08:00, 2011:12:01 10:25:51-08:00, 2011:12:01 10:26:07-08:00, 2011:12:01 10:30:37-08:00, 2011:12:01 12:30:35-08:00, 2011:12:13 14:17:32-08:00, 2011:12:13 14:25:28-08:00, 2011:12:22 09:53:55-08:00, 2011:12:22 09:55:12-08:00, 2011:12:22 09:55:21-08:00, 2011:12:28 12:40:11-08:00, 2011:12:29 12:17:02-08:00, 2012:01:02 10:06:34-08:00, 2012:01:02 14:21:44-08:00, 2012:01:02 14:26:33-08:00, 2012:01:05 15:37:07-08:00, 2012:01:05 15:37:15-08:00, 2012:01:05 15:38:23-08:00, 2012:01:05 15:38:35-08:00, 2012:01:05 16:02:21-08:00, 2012:01:12 14:55:58-08:00, 2012:01:17 15:47:50-08:00, 2012:01:17 15:47:50-08:00, 2012:01:17 16:18:55-08:00, 2012:01:17 16:19:51-08:00, 2012:01:17 16:27:53-08:00, 2012:01:17 16:34:45-08:00, 2012:01:17 16:35:01-08:00, 2012:01:17 16:35:28-08:00, 2012:01:18 08:12:50-08:00, 2012:02:16 13:33:52-08:00, 2012:02:16 13:34:01-08:00, 2012:02:16 13:34:23-08:00, 2012:02:16 13:36:09-08:00, 2012:02:16 13:36:40-08:00, 2012:02:16 13:37:29-08:00, 2012:02:16 13:37:39-08:00, 2012:02:16 13:38:14-08:00, 2012:02:16 13:39:02-08:00, 2012:02:16 13:40:37-08:00, 2012:02:16 13:41:32-08:00, 2012:02:16 13:57:23-08:00, 2012:02:16 13:57:33-08:00, 2012:02:16 13:57:58-08:00, 2012:02:16 13:58:26-08:00, 2012:02:16 14:00:26-08:00, 2012:02:16 14:07:25-08:00, 2012:02:16 14:11:05-08:00, 2012:02:16 14:11:26-08:00, 2012:02:16 14:13:53-08:00, 2012:02:16 14:14:19-08:00, 2012:02:16 14:15:35-08:00, 2012:02:16 14:15:46-08:00, 2012:02:16 14:15:46-08:00, 2012:02:16 14:18:28-08:00, 2012:02:16 14:18:28-08:00, 2012:03:12 14:35:23-07:00, 2012:03:12 14:35:23-07:00, 2012:03:12 14:37:40-07:00, 2012:03:12 14:41:11-07:00, 2012:03:12 14:46:27-07:00, 2012:03:12 14:49:55-07:00, 2012:03:12 14:50:07-07:00, 2012:03:12 14:51:30-07:00, 2012:03:12 14:52:13-07:00, 2012:03:12 14:54:34-07:00, 2012:03:12 14:55:53-07:00, 2012:03:12 15:00:58-07:00, 2012:03:12 15:03:57-07:00, 2012:03:12 15:06:06-07:00, 2012:03:12 15:06:21-07:00, 2012:03:12 15:07:56-07:00, 2012:03:12 15:08:35-07:00, 2012:03:12 15:43:50-07:00, 2012:03:12 15:45:08-07:00, 2012:03:12 15:45:35-07:00, 2012:03:12 15:48:04-07:00, 2012:03:12 15:52:13-07:00, 2012:03:12 15:54:04-07:00, 2012:03:12 15:55:16-07:00, 2012:03:13 08:24:10-07:00, 2012:03:13 08:32:52-07:00, 2012:03:13 08:35:16-07:00, 2012:03:13 08:35:20-07:00, 2012:03:13 08:35:45-07:00, 2012:03:13 08:37:46-07:00, 2012:03:13 08:38:24-07:00, 2012:03:13 08:38:38-07:00, 2012:03:13 08:38:38-07:00, 2012:04:09 13:33:13-07:00, 2012:04:09 13:36:25-07:00, 2012:04:09 13:41:32-07:00, 2012:04:09 13:41:47-07:00, 2012:04:09 13:43:22-07:00, 2012:04:09 13:47:55-07:00, 2012:04:09 13:58:42-07:00, 2012:04:09 13:58:52-07:00, 2012:04:10 09:02:45-07:00, 2012:04:10 09:09:20-07:00, 2012:04:10 10:55:37-07:00, 2012:04:10 11:54:11-07:00, 2012:04:10 13:06:51-07:00, 2012:04:10 13:11:52-07:00, 2012:04:10 13:27:09-07:00, 2012:04:12 09:16:15-07:00, 2012:04:12 09:21:21-07:00, 2012:04:12 09:21:39-07:00, 2012:04:12 09:24:09-07:00, 2012:04:12 09:24:31-07:00, 2012:04:12 09:25:20-07:00, 2012:04:12 09:26:13-07:00, 2012:04:12 09:34:14-07:00, 2012:04:12 09:39:09-07:00, 2012:04:12 09:43:47-07:00, 2012:04:12 09:44:43-07:00, 2012:04:12 09:46:44-07:00, 2012:04:12 09:49:58-07:00, 2012:04:12 09:55:51-07:00, 2012:04:12 09:56:24-07:00, 2012:04:12 09:58:29-07:00, 2012:04:12 10:39:41-07:00, 2012:04:12 10:46:22-07:00, 2012:04:12 11:02:02-07:00, 2012:04:12 11:02:48-07:00, 2012:04:12 11:04:19-07:00, 2012:04:12 11:11:03-07:00, 2012:04:12 11:54-07:00, 2012:04:12 12:02:22-07:00, 2012:04:12 12:10:10-07:00, 2012:04:12 12:11:25-07:00, 2012:04:12 12:11:38-07:00, 2012:04:12 12:42:50-07:00, 2012:04:12 12:46:29-07:00, 2012:04:12 12:46:35-07:00, 2012:04:12 12:49:16-07:00, 2012:04:12 13:03:29-07:00, 2012:04:12 13:06:54-07:00, 2012:04:12 13:09:35-07:00, 2012:04:13 10:30:26-07:00, 2012:04:13 10:35:21-07:00, 2012:04:13 10:36:53-07:00, 2012:04:13 10:47:05-07:00, 2012:05:25 09:11:57-07:00, 2012:06:05 15:15-07:00, 2012:06:05 15:47:39-07:00, 2012:06:05 15:51:02-07:00, 2012:06:05 15:56:20-07:00, 2012:06:05 16:17:30-07:00, 2012:06:05 16:19:33-07:00, 2012:06:05 16:23:18-07:00, 2012:06:05 17:01:34-07:00, 2012:06:06 08:17:15-07:00, 2012:06:06 09:00:17-07:00, 2012:06:06 09:04:22-07:00, 2012:06:06 09:07:30-07:00, 2012:06:06 09:10:46-07:00, 2012:06:06 09:22:02-07:00, 2012:06:06 09:23:07-07:00, 2012:06:06 09:26:10-07:00, 2012:06:06 09:26:22-07:00, 2012:06:06 09:26:44-07:00, 2012:06:06 09:58:52-07:00, 2012:06:06 10:09-07:00, 2012:06:06 10:46:53-07:00, 2012:06:06 11:01:15-07:00, 2012:06:06 11:03:50-07:00, 2012:06:06 11:12:45-07:00, 2012:06:06 11:13:29-07:00, 2012:06:06 11:16:03-07:00, 2012:06:06 11:39:41-07:00, 2012:06:06 11:59:34-07:00, 2012:06:06 12:03:59-07:00, 2012:06:06 12:12:27-07:00, 2012:06:06 12:17:14-07:00, 2012:06:06 12:28:35-07:00, 2012:06:06 13:10:27-07:00, 2012:06:06 13:27:50-07:00, 2012:06:06 13:43:08-07:00, 2012:06:07 14:15:06-07:00, 2012:06:07 14:18:59-07:00, 2012:06:07 14:19:49-07:00, 2012:06:07 14:25:11-07:00, 2012:06:07 14:34:23-07:00, 2012:06:07 14:47:45-07:00, 2012:06:07 14:50:33-07:00, 2012:06:07 14:57:03-07:00, 2012:06:07 14:59:57-07:00, 2012:06:07 15:01:43-07:00, 2012:06:07 15:08:12-07:00, 2012:06:07 15:11:09-07:00, 2012:06:07 15:15:06-07:00, 2012:06:07 15:21:04-07:00, 2012:06:07 15:22:52-07:00, 2012:06:07 15:54:51-07:00, 2012:06:07 16:46:42-07:00, 2012:06:07 16:47:06-07:00, 2012:06:07 16:53:16-07:00, 2012:06:08 08:12:09-07:00, 2012:06:08 08:25:04-07:00, 2012:06:08 08:27:05-07:00, 2012:06:08 09:58:13-07:00, 2012:06:08 09:59:26-07:00, 2012:06:08 10:02:03-07:00, 2012:06:08 10:16:25-07:00, 2012:06:08 10:26:08-07:00, 2012:06:08 10:27:31-07:00, 2012:06:08 10:32:47-07:00, 2012:06:08 10:33:53-07:00, 2012:06:08 13:12:23-07:00, 2012:06:08 13:19:21-07:00, 2012:06:08 13:22:36-07:00, 2012:06:08 13:26:51-07:00, 2012:06:08 14:44:16-07:00, 2012:07:20 10:04:01-07:00 History Software Agent : Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0 History Changed : /;/metadata, /metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata Create Date : 2012:07:20 10:11:37-07:00 Modify Date : 2012:07:20 10:13:23-07:00 Metadata Date : 2012:07:20 10:13:23-07:00 Creator Tool : Adobe InDesign CS5 (7.0) Page Image Page Number : 1, 2 Page Image Format : JPEG, JPEG Page Image Width : 256, 256 Page Image Height : 256, 256 Page Image : (Binary data 10812 bytes, use -b option to extract), (Binary data 10953 bytes, use -b option to extract) Doc Change Count : 10096 Format : application/pdf Producer : Adobe PDF Library 9.9 Trapped : False Has XFA : No Page Count : 20 Creator : Adobe InDesign CS5 (7.0)EXIF Metadata provided by EXIF.tools