Harbor Freight 98019 Owner S Manual

Manual for the 98019 Two Bike Hitch Mount Bike Rack 98019 Two Bike Hitch Mount Bike Rack

: Harbor-Freight Harbor-Freight-98019-Owner-S-Manual harbor-freight-98019-owner-s-manual harbor-freight pdf

Open the PDF directly: View PDF .
Page Count: 4

2-BIKE HITCH

RACK

INSTRUCTIONS AND PRECAUTIONS

Visit our website at: http://www.harborfreight.com

SAVE THESE INSTRUCTIONS. READ ALL

PRECAUTIONS AND INSTRUCTIONS.

Copyright© 2008 by Harbor Freight Tools®. All rights reserved. No portion of this document or any artwork contained herein

may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. Diagrams within this

document may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly from the

product described herein.

For technical questions or replacement parts, please call 1-800-444-3353.

2-Bike Hitch Rack

Item 98019

INSTRUCTIONS AND PRECAUTIONS

Visit our website at:

http://www.harborfreight.com

Read this material before

using this product.

Failure to do so can result

in serious injury.

SAVE THIS MANUAL.

When unpacking, make sure that the

product is intact and undamaged.

If any parts are missing or broken,

please call

1-800-444-3353 as soon as possible.

Copyright© 2008 by Harbor Freight Tools®. All rights reserved. No

portion of this document or any artwork contained herein may be

reproduced in any shape or form without the express written consent

of Harbor Freight Tools. Diagrams within this document may not be

drawn proportionally. Due to continuing improvements, actual product

may differ slightly from the product described herein. Tools required for

assembly and service may not be included.

For technical questions or replacement parts, please call

1-800-444-3353.

Specications

Maximum Weight Capacity 100 lbs

Bike Capacity 2

Holding Mechanism Thermoplastic Bike Holders,

Hook & Loop Straps

Hitch Classes Used with

Class I, II, III, IV Hitches

Swing-down feature For opening hatches

Unpacking

When unpacking, check to make sure that the item

is intact and undamaged. If any parts are missing or

broken, please call Harbor Freight Tools at the number

shown on the cover of this document as soon as pos-

sible.

Important Safety Information

1. Assemble only according to these instructions.

Improper assembly can create hazards.

2. Wear ANSI-approved safety goggles and heavy-

duty work gloves during assembly.

3. Keep assembly area clean and well lit.

4. Keep bystanders out of the area during assembly.

5. Do not assemble when tired or when under the

inuence of drugs or medication.

6. Do not exceed 55 MPH with Carrier attached.

7. Contact the Department of Transportation (DOT)

and check local regulations for laws regarding the

installation and use of this bike rack.

8. This product is not a toy. Do not allow children to

play with or on this item.

9. Use for intended purpose(s) only.

10. Inspect before use; do not use if parts are loose or

damaged.

11. Maintain product labels and nameplates. These

carry important safety information. If unreadable or

missing, contact Harbor Freight Tools for a replace-

ment.

Manual Revised 11c

Page 2SKU 98019 For technical questions, please call 1-800-444-3353.

Read the ENTIRE INSTRUCTIONS AND

PRECAUTIONS section at the beginning of

this document including all text under

subheadings therein before set up or use of

this product.

Assembly

1. Slide the Hitch End of the Linker (1) into the ve-

hicle’s trailer hitch and lock with a steel pin. See

Figure 1.

2. Install the Support Column (2) to the upright part

of the Linker (1) and secure with a Bolt (5), Nut (7)

and two Washers (6), through the bottom hole and

the Hitch Pin (4) through the upper hole. When the

back hatch or tailgate has to be accessed, pull the

Hitch Pin (4) out and swing the rack downward,

pivoting at the bolt directly below the Hitch Pin (4).

3. Hold the two Bike Rack (3) sections over the upper

end of the Support Column (2) aligning the bolt

holes. Secure this with two Bolts (5), four Washers

(6) and two Nuts (7).

4. Double check all nuts and bolts, making sure they

are all tight.

Operation

Note: This rack is designed to hold up to two bikes.

1. Make sure that the holders are facing upwards.

Open the straps and place the bicycle’s cross-bar

onto the holders. Close the straps over the bike,

pressing the straps together for a secure hold.

Place the second bike facing in the opposite direc-

tion and secure it with the hook & loop straps as

well.

2. The Thermoplastic Holders keep the bike(s) in posi-

tion, preventing them from sliding back and forth,

causing damage. The straps keep the bikes from

bumping out of the holders.

Note: It is recommended that if you plan to carry only one

bike, you can place it in the position closest to the

vehicle.

3.

4.

5. Assembly Diagram

REV 11c

Instructions

Page 3SKU 98019 For technical questions, please call 1-800-444-3353.

1

2

6

3

8

7

4

5

Hitch

End

Figure 1

REV 11c

PLEASE READ THE FOLLOWING CAREFULLY

THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM IN

THIS DOCUMENT AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY

REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS

TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE

MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD

BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS, AND NOT BY THE BUYER. THE BUYER ASSUMES ALL

RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS

THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO.

Record Serial Number Here:

Note: If product has no serial number, record month and year of purchase instead.

Note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement

parts.

Part Description Qty

1 Linker 1

2 Support Column 1

3 Bike Rack 2

4 Hitch Pin 1

5 Bolt 3

6 Washer 6

7 Self Locking Nut 3

8 Holder 4

Parts List and Diagram

Limited 90 Day Warranty

Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability stan-

dards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for

the period of 90 days from the date of purchase. This warranty does not apply to damage due directly or indirectly, to

misuse, abuse, negligence or accidents, repairs or alterations outside our facilities, criminal activity, improper instal-

lation, normal wear and tear, or to lack of maintenance. We shall in no event be liable for death, injuries to persons

or property, or for incidental, contingent, special or consequential damages arising from the use of our product. Some

states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation of exclu-

sion may not apply to you. THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES, EXPRESS

OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS.

To take advantage of this warranty, the product or part must be returned to us with transportation charges pre-

paid. Proof of purchase date and an explanation of the complaint must accompany the merchandise. If our inspection

veries the defect, we will either repair or replace the product at our election or we may elect to refund the purchase

price if we cannot readily and quickly provide you with a replacement. We will return repaired products at our expense,

but if we determine there is no defect, or that the defect resulted from causes not within the scope of our warranty,

then you must bear the cost of returning the product.

This warranty gives you specic legal rights and you may also have other rights which vary from state to state.

3491 Mission Oaks Blvd. • PO Box 6009 • Camarillo, CA 93011 • (800) 444-3353

REV 11c