Harbor Freight 98019 Owner S Manual
Manual for the 98019 Two Bike Hitch Mount Bike Rack 98019 Two Bike Hitch Mount Bike Rack
2014-07-05
: Harbor-Freight Harbor-Freight-98019-Owner-S-Manual harbor-freight-98019-owner-s-manual harbor-freight pdf
Open the PDF directly: View PDF 
.
Page Count: 4
| Download | |
| Open PDF In Browser | View PDF |
Specifications 2-Bike Hitch Rack Item 98019 Instructions and precautions Maximum Weight Capacity 100 lbs Bike Capacity 2 Holding Mechanism Thermoplastic Bike Holders, Hook & Loop Straps Hitch Classes Used with Class I, II, III, IV Hitches Swing-down feature For opening hatches Unpacking When unpacking, check to make sure that the item is intact and undamaged. If any parts are missing or broken, please call Harbor Freight Tools at the number shown on the cover of this document as soon as pos‑ sible. Important Safety Information Visit our website at: http://www.harborfreight.com Read this material before using this product. Failure to do so can result in serious injury. Save this manual. When unpacking, make sure that the product is intact and undamaged. If any parts are missing or broken, please call 1‑800‑444‑3353 as soon as possible. Copyright© 2008 by Harbor Freight Tools®. All rights reserved. No portion of this document or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. Diagrams within this document may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly from the product described herein. Tools required for assembly and service may not be included. For technical questions or replacement parts, please call 1‑800‑444‑3353. Manual Revised 11c 1. Assemble only according to these instructions. Improper assembly can create hazards. 2. Wear ANSI-approved safety goggles and heavyduty work gloves during assembly. 3. Keep assembly area clean and well lit. 4. Keep bystanders out of the area during assembly. 5. Do not assemble when tired or when under the influence of drugs or medication. 6. Do not exceed 55 MPH with Carrier attached. 7. Contact the Department of Transportation (DOT) and check local regulations for laws regarding the installation and use of this bike rack. 8. This product is not a toy. Do not allow children to play with or on this item. 9. Use for intended purpose(s) only. 10. Inspect before use; do not use if parts are loose or damaged. 11. Maintain product labels and nameplates. These carry important safety information. If unreadable or missing, contact Harbor Freight Tools for a replace‑ ment. Instructions Read the entire INSTRUCTIONS and PRECAUTIONS section at the beginning of this document including all text under subheadings therein before set up or use of this product. Operation Note: This rack is designed to hold up to two bikes. 1. Make sure that the holders are facing upwards. Open the straps and place the bicycle’s cross-bar onto the holders. Close the straps over the bike, pressing the straps together for a secure hold. Place the second bike facing in the opposite direc‑ tion and secure it with the hook & loop straps as well. 2. The Thermoplastic Holders keep the bike(s) in posi‑ tion, preventing them from sliding back and forth, causing damage. The straps keep the bikes from bumping out of the holders. Assembly 1. Slide the Hitch End of the Linker (1) into the ve‑ hicle’s trailer hitch and lock with a steel pin. See Figure 1. 2. Install the Support Column (2) to the upright part of the Linker (1) and secure with a Bolt (5), Nut (7) and two Washers (6), through the bottom hole and the Hitch Pin (4) through the upper hole. When the back hatch or tailgate has to be accessed, pull the Hitch Pin (4) out and swing the rack downward, pivoting at the bolt directly below the Hitch Pin (4). 3. 4. Hold the two Bike Rack (3) sections over the upper end of the Support Column (2) aligning the bolt holes. Secure this with two Bolts (5), four Washers (6) and two Nuts (7). Double check all nuts and bolts, making sure they are all tight. Note: It is recommended that if you plan to carry only one bike, you can place it in the position closest to the vehicle. 3. 4. 5. Assembly Diagram REV 11c SKU 98019 For technical questions, please call 1-800-444-3353. Page 2 Parts List and Diagram Part 1 2 3 4 5 6 7 8 Description Qty Linker Support Column Bike Rack Hitch Pin Bolt Washer Self Locking Nut Holder 1 1 2 1 3 6 3 4 8 3 5 7 6 2 1 4 Hitch End Figure 1 Record Serial Number Here: Note: If product has no serial number, record month and year of purchase instead. Note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. PLEASE READ THE FOLLOWING CAREFULLY The manufacturer and/or distributor has provided the parts list and assembly diagram in this document as a reference tool only. Neither the manufacturer or distributor makes any representation or warranty of any kind to the buyer that he or she is qualified to make any repairs to the product, or that he or she is qualified to replace any parts of the product. In fact, the manufacturer and/or distributor expressly states that all repairs and parts replacements should be undertaken by certified and licensed technicians, and not by the buyer. The buyer assumes all risk and liability arising out of his or her repairs to the original product or replacement parts thereto, or arising out of his or her installation of replacement parts thereto. REV 11c SKU 98019 For technical questions, please call 1-800-444-3353. Page 3 Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability stan‑ dards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase. This warranty does not apply to damage due directly or indirectly, to misuse, abuse, negligence or accidents, repairs or alterations outside our facilities, criminal activity, improper instal‑ lation, normal wear and tear, or to lack of maintenance. We shall in no event be liable for death, injuries to persons or property, or for incidental, contingent, special or consequential damages arising from the use of our product. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation of exclu‑ sion may not apply to you. This warranty is expressly in lieu of all other warranties, express or implied, including the warranties of merchantability and fitness. To take advantage of this warranty, the product or part must be returned to us with transportation charges pre‑ paid. Proof of purchase date and an explanation of the complaint must accompany the merchandise. If our inspection verifies the defect, we will either repair or replace the product at our election or we may elect to refund the purchase price if we cannot readily and quickly provide you with a replacement. We will return repaired products at our expense, but if we determine there is no defect, or that the defect resulted from causes not within the scope of our warranty, then you must bear the cost of returning the product. This warranty gives you specific legal rights and you may also have other rights which vary from state to state. 3491 Mission Oaks Blvd. • PO Box 6009 • Camarillo, CA 93011 • (800) 444-3353 REV 11c
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes XMP Toolkit : Adobe XMP Core 5.0-c060 61.134777, 2010/02/12-17:32:00 Instance ID : uuid:4648de04-d679-ac40-af4f-5772b59fd005 Document ID : xmp.did:87362C2C182068118083CA26F6EAD2CD Original Document ID : adobe:docid:indd:0c13b0b9-c388-11dc-9a11-8ab97d7a43e9 Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:376CBBC3072068118083CA26F6EAD2CD Derived From Document ID : adobe:docid:indd:0c13b0b9-c388-11dc-9a11-8ab97d7a43e9 Derived From Original Document ID: adobe:docid:indd:0c13b0b9-c388-11dc-9a11-8ab97d7a43e9 Derived From Rendition Class : default History Action : saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved History Instance ID : xmp.iid:C5D9C8842A20681180839C071BEF416C, xmp.iid:C6D9C8842A20681180839C071BEF416C, xmp.iid:C9D9C8842A20681180839C071BEF416C, xmp.iid:376CBBC3072068118083CA26F6EAD2CD, xmp.iid:87362C2C182068118083CA26F6EAD2CD, xmp.iid:8D362C2C182068118083CA26F6EAD2CD, xmp.iid:11C5BEB6232068118083CA26F6EAD2CD, xmp.iid:16C5BEB6232068118083CA26F6EAD2CD, xmp.iid:CCADF6B0242068118083CA26F6EAD2CD, xmp.iid:D1ADF6B0242068118083CA26F6EAD2CD, xmp.iid:029AB2212D206811808385BB7E00185B, xmp.iid:E0FB1774072068118083BD60F73D9603 History When : 2011:02:01 14:51:01-08:00, 2011:02:01 14:51:01-08:00, 2011:02:01 14:51:38-08:00, 2011:03:16 10:53:27-07:00, 2011:03:16 10:53:27-07:00, 2011:03:16 11:12:16-07:00, 2011:03:16 12:16:04-07:00, 2011:03:16 12:21:28-07:00, 2011:03:16 12:23:04-07:00, 2011:03:16 14:08:16-07:00, 2011:03:17 14:14:58-07:00, 2011:03:17 14:57:54-07:00 History Software Agent : Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0 History Changed : /;/metadata, /metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata Create Date : 2011:03:17 14:58:23-07:00 Modify Date : 2011:03:17 14:58:24-07:00 Metadata Date : 2011:03:17 14:58:24-07:00 Creator Tool : Adobe InDesign CS5 (7.0) Page Image Page Number : 1, 2 Page Image Format : JPEG, JPEG Page Image Width : 256, 256 Page Image Height : 256, 256 Page Image : (Binary data 10610 bytes, use -b option to extract), (Binary data 7402 bytes, use -b option to extract) Doc Change Count : 828 Format : application/pdf Producer : Adobe PDF Library 9.9 Trapped : False Page Count : 4 Creator : Adobe InDesign CS5 (7.0)EXIF Metadata provided by EXIF.tools