Harbor Freight Abrasive Blasting Deadman Valve With 4 Ceramic Nozzles Product Manual
Harbor-Freight-60491-Owner-S-Manual harbor-freight-60491-owner-s-manual
Manual for the 60491 Abrasive Blasting Deadman Valve with 4 Ceramic Nozzles 60491 Abrasive Blasting Deadman Valve with 4 Ceramic Nozzles
2015-05-27
: Harbor-Freight Harbor-Freight-Abrasive-Blasting-Deadman-Valve-With-4-Ceramic-Nozzles-Product-Manual-723812 harbor-freight-abrasive-blasting-deadman-valve-with-4-ceramic-nozzles-product-manual-723812 harbor-freight pdf
Open the PDF directly: View PDF 
.
Page Count: 12
| Download | |
| Open PDF In Browser | View PDF |
WARNING SYMBOLS AND DEFINITIONS This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death. Indicates a hazardous situation which, if not avoided, will result in death or serious injury. Indicates a hazardous situation which, if not avoided, could result in death or serious injury. Indicates a hazardous situation which, if not avoided, could result in minor or moderate injury. Addresses practices not related to personal injury. Important Safety Instructions INSTRUCTIONS PERTAINING TO A RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS WARNING – When using tools, basic precautions should always be followed, including the following: d. Use safety equipment. A dust mask, non-skid safety shoes and a hard hat must be used for the applicable conditions. Wear heavy-duty work gloves during use. e. Always wear eye protection. Wear ANSI-approved safety goggles. f. Always wear hearing protection when using the tool. Prolonged exposure to high intensity noise is able to cause hearing loss. Work Area a. Keep the work area clean and well lighted. Cluttered benches and dark areas increase the risks of electric shock, fire, and injury to persons. b. Do not operate the tool in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. The tool is able to create sparks resulting in the ignition of the dust or fumes. c. Keep bystanders, children, and visitors away while operating the tool. Distractions are able to result in the loss of control of the tool. Personal Safety a. Stay alert. Watch what you are doing and use common sense when operating the tool. Do not use the tool while tired or under the influence of drugs, alcohol, or medication. A moment of inattention while operating the tool increases the risk of injury to persons. b. Dress properly. Do not wear loose clothing or jewelry. Contain long hair. Keep hair, clothing, and gloves away from moving parts. Loose clothes, jewelry, or long hair increases the risk of injury to persons as a result of being caught in moving parts. c. Do not overreach. Keep proper footing and balance at all times. Proper footing and balance enables better control of the tool in unexpected situations. Page 2 Tool Use and Care a. Do not force the tool. Use the correct tool for the application. The correct tool will do the job better and safer at the rate for which the tool is designed. b. Disconnect the tool from the air source before making any adjustments, changing accessories, or storing the tool. Such preventive safety measures reduce the risk of starting the tool unintentionally. Turn off and detach the air supply, safely discharge any residual air pressure, and release the throttle and/or turn the switch to its off position before leaving the work area. c. Store the tool when it is idle out of reach of children and other untrained persons. A tool is dangerous in the hands of untrained users. For technical questions, please call 1-800-444-3353. ITEM 60491 d. Check for misalignment or binding of moving parts, breakage of parts, and any other condition that affects the tool’s operation. If damaged, have the tool serviced before using. Many accidents are caused by poorly maintained tools. There is a risk of bursting if the tool is damaged. e. Use only accessories that are identified by the manufacturer for the specific tool model. Use of an accessory not intended for use with the specific tool model, increases the risk of injury to persons. Service a. Tool service must be performed only by qualified repair personnel. Symbol Property or statement ft-lb Foot-pounds of torque BPM Blows per minute CFM Cubic Feet per Minute flow SCFM Cubic Feet per Minute flow at standard conditions NPT National pipe thread, tapered NPS National pipe thread, straight b. When servicing a tool, use only identical replacement parts. Use only authorized parts. WARNING marking concerning Risk of Eye Injury. Wear ANSI‑approved eye protection. Air Source WARNING marking concerning Risk of Hearing Loss. Wear hearing protection. a. Never connect to an air source that is capable of exceeding 200 psi. Over pressurizing the tool may cause bursting, abnormal operation, breakage of the tool or serious injury to persons. Use only clean, dry, regulated compressed air at the rated pressure or within the rated pressure range as marked on the tool. Always verify prior to using the tool that the air source has been adjusted to the rated air pressure or within the rated air-pressure range. b. WARNING! Do not exceed 100 PSI working air pressure during use. c. Never use oxygen, carbon dioxide, combustible gases or any bottled gas as an air source for the tool. Such gases are capable of explosion and serious injury to persons. SAVE THESE INSTRUCTIONS. Symbols and Specific Safety Instructions Symbol Definitions Symbol Property or statement no No-load speed .../min Revolutions or reciprocation per minute PSI Pounds per square inch of pressure Chart continued in next column. ITEM 60491 WARNING marking concerning Risk of Respiratory Injury. Wear NIOSH‑approved dust mask/respirator. WARNING marking concerning Risk of Explosion. Specific Safety Instructions 1. The warnings and precautions discussed in this manual cannot cover all possible conditions and situations that may occur. It must be understood by the operator that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator. 2. Do not exceed maximum 100 PSI. 3. Avoid unintentional starting. Prepare to begin work before turning on the tool. 4. Do not leave the tool unattended when it is plugged into compressor. Release the Trigger, and unplug it from its pneumatic air source before leaving. 5. Never point the Trigger at a human or an animal. 6. Use clamps (not included) or other practical ways to secure and support the workpiece to a stable platform. 7. This product is not a toy. Keep it out of reach of children. 8. WARNING: This product, when used for abrasive blasting and similar applications, produces chemicals known to the State of California to cause cancer and birth defects (or other reproductive harm). (California Health & Safety Code § 25249.5, et seq.) For technical questions, please call 1-800-444-3353. Page 3 9. WARNING: The brass components of this product contain lead, a chemical known to the State of California to cause birth defects (or other reproductive harm). (California Health & Safety code § 25249.5, et seq.) 2. Conduct air monitoring to measure worker exposures. 10. Obey the manual for the air compressor used to power this tool. 4. Practice good personal hygiene to avoid unnecessary exposure to silica dust. 11. Install an in-line shutoff valve to allow immediate control over the air supply in an emergency, even if a hose is ruptured. 5. Wear washable or disposable protective clothes at the work site. Shower and change into clean clothes before leaving the work site to prevent contamination of cars, homes and other work areas. 12. If any abnormal vibration occurs, stop use immediately. Silicosis and Aluminum Oxide Warnings Warning: Abrasive blasting with sand containing crystalline silica can cause serious or fatal respiratory disease. Exposure to crystalline silica may cause silicosis (a serious lung disease), cancer and death. Exposure to aluminum oxide (a dust generated from material removing processes) can result in eye, skin and breathing irritation. Always use a NIOSH (National Institute for Occupational Safety and Health) approved respirator and safety goggles. Avoid skin exposure. Proper ventilation in the work area is required. Read and understand the 10 recommended measures below to reduce crystalline silica exposures in the workplace and prevent silicosis and silicosis related deaths. NIOSH recommends the following measures to reduce crystalline silica exposures in the workplace and prevent silicosis and silicosis-related deaths: 3. Use containment methods such as blast-cleaning machines and cabinets to control the hazard and protect adjacent workers from exposure. 6. Use respiratory protection when source controls cannot keep silica exposures below the NIOSH REL. 7. Provide periodic medical examinations for all workers who may be exposed to crystalline silica. 8. Post signs to warn workers about the hazard and to inform them about required protective equipment. 9. Provide workers with training that includes information about health effects, work practices and protective equipment for crystalline silica. 10. Report all cases of silicosis to State health departments and to OSHA or the Mine Safety and Health Administration (MSHA) 11. The warnings and precautions discussed in this manual cannot cover all possible conditions and situations that may occur. It must be understood by the operator that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator. 1. Prohibit silica sand (or other substances containing more than 1% crystalline silica) as an abrasive blasting material and substitute less hazardous materials. SAVE THESE INSTRUCTIONS. Page 4 For technical questions, please call 1-800-444-3353. ITEM 60491 Functional Description Specifications Nozzle Sizes 2 mm (Fine) 2.5 mm (Medium) 3 mm / 3.5 mm (Coarse Grit) Max. Air Pressure 100 PSI Air Inlet 3/8 IN. - 18 NPT Initial Tool Set Up/Assembly Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this manual including all text under subheadings therein before set up or use of this product. Note: For additional information regarding the parts listed in the following pages, refer to the Assembly Diagram near the end of this manual. Note: This air tool may be shipped with a protective plug covering the air inlet. Remove this plug before set up. 2. Incorporate a filter, regulator with pressure gauge, dryer, in-line shutoff valve, and quick coupler for best service, as shown on Figure A on page 6 and Figure B on page 7. An in-line shutoff ball valve is an important safety device because it controls the air supply even if the air hose is ruptured. The shutoff valve should be a ball valve because it can be closed quickly. Note: An oiler system should not be used with this tool. The oil will mix with the material being propelled, causing poor results. 3. Attach an air hose to the compressor’s air outlet. Connect the air hose to the air inlet of the tool. Other components, such as a coupler plug and quick coupler, will make operation more efficient, but are not required. WARNING! TO PREVENT SERIOUS INJURY FROM ACCIDENTAL OPERATION: Do not install a female quick coupler on the tool. Such a coupler contains an air valve that will allow the air tool to retain pressure and operate accidentally after the air supply is disconnected. Note: Air flow, and therefore tool performance, can be hindered by undersized air supply components. Assembly 4. The air hose must be long enough to reach the work area with enough extra length to allow free movement while working. 1. The Valve is equipped with four different size Ceramic Nozzles (37a-d) for fine, medium, and course grit. 5. Close the in-line shutoff valve between the compressor and the tool. 2. To install a Ceramic Nozzle, unscrew and remove the Nozzle Cap Nut (39). Place the Gasket (36) against the Adapter (35) and place the Ceramic Nozzle against the Gasket. 6. Turn on the air compressor according to the manufacturer’s directions and allow it to build up pressure until it cycles off. 3. Insert the corresponding size Rubber Adapter (38) onto the Ceramic Nozzle. Then, firmly screw the Nozzle Cap Nut back onto the Adapter. Air Supply Setup TO PREVENT SERIOUS INJURY FROM EXPLOSION: Use only clean, dry, regulated, compressed air to power this tool. Do not use oxygen, carbon dioxide, combustible gases, or any other bottled gas as a power source for this tool. 1. To attach a grit supply hose - 3/8” - 18 NPT (not included) to the Valve, wrap approximately 3” of pipe thread sealer tape (not included) around the male threads at the end of the grit supply hose. Then, firmly tighten the grit supply hose onto the Intake Connector (34) of the Valve. ITEM 60491 7. Adjust the air compressor’s output regulator so that the air output is enough to properly power the tool, but the output will not exceed the tool’s maximum air pressure of 100 PSI at any time. Adjust the pressure gradually, while checking the air output gauge to set the right pressure range. 8. Inspect the air connections for leaks. Repair any leaks found. 9. If the tool will not be used at this time, turn off and detach the air supply and safely discharge any residual air pressure to prevent accidental operation. Note: Residual air pressure should not be present after the tool is disconnected from the air supply. However, it is a good safety measure to attempt to discharge the tool in a safe fashion after disconnecting to ensure that the tool is disconnected and unpowered. For technical questions, please call 1-800-444-3353. Page 5 Page 6 For technical questions, please call 1-800-444-3353. ITEM 60491 A B C D E F G H Air Hose Filter Regulator Lubricator (optional) Coupler and Plug Leader Hose (optional) Air Cleaner / Dryer (optional) Air Adjusting Valve (optional) Description Non-lubricated Tools A Lubricated Tools B B C C A Function A E E F H Connects air to tool Prevents dirt and condensation from damaging tool or work piece Adjusts air pressure to tool For air tool lubrication Provides each connection Increases coupler life Prevents water vapor from damaging work piece For fine tuning airflow at tool G D Figure A: Portable Air Supply Setup ITEM 60491 For technical questions, please call 1-800-444-3353. Page 7 B A A B C D E F G H I J K L M N O F Description F E C C H H J I K J L Function L M M O N For noise and vibration reduction Secures air compressor in place Isolates sections of system for maintenance For vibration reduction Distributes air to branch lines To drain moisture from system Brings air to point of use Prevents dirt and condensation from damaging tool or work piece Prevents water vapor from damaging work piece Adjusts air pressure to tool For air tool lubrication Connects air to tool Provides each connection For fine tuning airflow at tool Increases coupler life Non-lubricated Tools Vibration Pads Anchor Bolts Ball Valve Isolation Hose Main Air Line - 3/4” minimum recommended Ball Valve Branch Air Line -1/2” minimum recommended Filter Air Cleaner / Dryer (optional) Regulator Lubricator Air Hose Coupler and Plug Air Adjusting Valve Lead Hose B A C D G Lubricated Tools Slope Figure B: Stationary Air Supply Setup F 3. There must not be hazardous objects (such as utility lines or foreign objects) nearby that will present a hazard while working. Operating Instructions Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this manual including all text under subheadings therein before set up or use of this product. Inspect tool before use, looking for damaged, loose, and missing parts. If any problems are found, do not use tool until repaired. Tool Set Up TO PREVENT SERIOUS INJURY FROM ACCIDENTAL OPERATION: Detach the air supply and safely discharge any residual air pressure in the tool before performing any inspection, maintenance, or cleaning procedures. TO PREVENT SERIOUS INJURY: Do not adjust or tamper with any control or component in a way not specifically explained within this manual. Improper adjustment can result in tool failure or other serious hazards. Work Piece and Work Area Set Up 1. Designate a work area that is clean and well‑lit. The work area must not allow access by children or pets to prevent distraction and injury. 2. Route the air hose along a safe route to reach the work area without creating a tripping hazard or exposing the air hose to possible damage. The air hose must be long enough to reach the work area with enough extra length to allow free movement while working. Page 8 CAUTION! Prior to sandblasting, protect other people (and property) in the work area from flying debris by providing barriers or shields. Always wear appropriate clothing and safety gear when operating the Deadman Valve. General Operating Instructions 1. If possible, place the workpiece inside a sandblast cabinet (not included). Otherwise, isolate the workpiece to make sure no damage can occur to nearby walls, tools, equipment, or other property. 2. Install the desired size Ceramic Nozzle (37) and Rubber Adapter (38) on the Deadman Valve. 4. Connect the grit supply hose to the Valve. To keep the grit supply hose out of the way, hang it over your shoulder. 5. Turn on the sandblaster unit (not included). 6. Grip the Valve firmly, aim it at the workpiece, and squeeze the Trigger (42) while slowly moving the tool in a circular or right to left motion. 7. Continue moving in a circular or right to left motion until you have achieved the desired appearance (finish) on the workpiece. 8. When the sandblasting job is completed, release pressure on the Trigger (42) to turn off the Valve. Turn off the sandblaster unit. 9. Turn off the air compressor. Squeeze the Trigger once to release any compressed air. Disconnect the Valve from its air supply. 10. Clean, then store the tool indoors out of children’s reach. For technical questions, please call 1-800-444-3353. ITEM 60491 Cleaning, Maintenance, and Lubrication User‑Maintenance Instructions Procedures not specifically explained in this manual must be performed only by a qualified technician. TO PREVENT SERIOUS INJURY FROM ACCIDENTAL OPERATION: Detach the air supply and safely discharge any residual air pressure in the tool before performing any inspection, maintenance, or cleaning procedures. TO PREVENT SERIOUS INJURY FROM TOOL FAILURE: Do not use damaged equipment. If abnormal noise, vibration, or leaking air occurs, have the problem corrected before further use. Note: These procedures are in addition to the regular checks and maintenance explained as part of the regular operation of the air-operated tool. 1. BEFORE EACH USE, inspect the general condition of the tool. Check for loose screws, misalignment or binding of moving parts, clogged Ceramic Nozzle, damaged supply hose, cracked or broken parts, and any other condition that may affect its safe operation. Do not use damaged equipment. 2. AFTER USE, clean external surfaces of tool with a clean, moist cloth. If necessary, use a mild detergent. WARNING! Do not use solvents or immerse in liquids, as damage to the Dead Man Valve may occur. 3. Store in a dry, secure area out of reach of children. Troubleshooting Problem Tool will not start. Possible Causes Likely Solutions 1. Compressor not on. 1. Turn compressor on. 2. Air line not connected properly. 2. Check that air line is connected. Air pressure too low. Increase air pressure. Blast flow surges / Excessive abrasive consumption. Clogging and plugging Excessive debris in abrasive. of blast flow. Lack of abrasive flow. 1. Bag empty. 2. Moisture in abrasive 3. Not enough air pressure. 4. Air hose kinked. 5. Excessive debris in abrasive. Purge and filter abrasive. 1. Fill Bag 2. Use dry abrasive. 3. Increase air pressure. 4. Un-kink air hose. 5. Clean or filter abrasive. Follow all safety precautions whenever diagnosing or servicing the tool. Disconnect air supply before service. ITEM 60491 For technical questions, please call 1-800-444-3353. Page 9 Parts List Part 31 32 33 34 35 36 37A 37B 37C 37D 38 Description Upper Body Lower Body Metal Pipe Intake Connector (3/8 IN. -18 NPT) Adapter Gasket 2mm Ceramic Nozzle 2.5mm Ceramic Nozzle 3mm Ceramic Nozzle 3.5mm Ceramic Nozzle Rubber Adapter Qty 1 1 1 1 1 1 1 1 1 1 4 Part 39 40 41 42 43 44 45 46 47 48 49 Description Nozzle Cap Nut Screw (ST4.2x12) Screw (ST4.2x12) Trigger Roll Pin Spring Rubber Pad Screw (M3x25) Pad Nut (M3) Abrasive Gun Assembly (not shown) Qty 1 2 4 1 1 1 1 1 1 1 1 Note: Parts for this manual are numbered 31-49. PLEASE READ THE FOLLOWING CAREFULLY NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS, AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO. Page 10 For technical questions, please call 1-800-444-3353. ITEM 60491 Assembly Diagram Record Product’s Serial Number Here: Note: If product has no serial number, record month and year of purchase instead. Replacement parts are not available for this item. ITEM 60491 For technical questions, please call 1-800-444-3353. Page 11 Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase. This warranty does not apply to damage due directly or indirectly, to misuse, abuse, negligence or accidents, repairs or alterations outside our facilities, criminal activity, improper installation, normal wear and tear, or to lack of maintenance. We shall in no event be liable for death, injuries to persons or property, or for incidental, contingent, special or consequential damages arising from the use of our product. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation of exclusion may not apply to you. THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS. To take advantage of this warranty, the product or part must be returned to us with transportation charges prepaid. Proof of purchase date and an explanation of the complaint must accompany the merchandise. If our inspection verifies the defect, we will either repair or replace the product at our election or we may elect to refund the purchase price if we cannot readily and quickly provide you with a replacement. We will return repaired products at our expense, but if we determine there is no defect, or that the defect resulted from causes not within the scope of our warranty, then you must bear the cost of returning the product. This warranty gives you specific legal rights and you may also have other rights which vary from state to state. 3491 Mission Oaks Blvd. • PO Box 6009 • Camarillo, CA 93011 • (800) 444-3353
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Create Date : 2012:07:31 11:34:09-07:00 Creator : Adobe InDesign CS5 (7.0.4) Modify Date : 2012:07:31 11:34:38-07:00 Has XFA : No Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:56:37 Instance ID : uuid:7d0295e1-2087-b448-9f41-aa8629cc4b3f Document ID : xmp.did:A24388401A20681180839040FD84B302 Original Document ID : adobe:docid:indd:2947f79c-bab0-11df-a4dc-d1b6dbadcc65 Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:E48244DB1220681180839040FD84B302 Derived From Document ID : xmp.did:E94C7AC5082068118C14CC91DCBF3D5E Derived From Original Document ID: adobe:docid:indd:2947f79c-bab0-11df-a4dc-d1b6dbadcc65 Derived From Rendition Class : default History Action : saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved History Instance ID : xmp.iid:09801174072068118083DC2F551A7664, xmp.iid:0A801174072068118083DC2F551A7664, xmp.iid:F77F11740720681180838DA235D988C3, xmp.iid:F87F11740720681180838DA235D988C3, xmp.iid:F97F11740720681180838DA235D988C3, xmp.iid:FA7F11740720681180838DA235D988C3, xmp.iid:FC7F11740720681180838DA235D988C3, xmp.iid:A3B78DBA2F2068118083F1EEC4B59798, xmp.iid:A4B78DBA2F2068118083F1EEC4B59798, xmp.iid:0CDD86A2452068118083F1EEC4B59798, xmp.iid:0EDD86A2452068118083F1EEC4B59798, xmp.iid:10DD86A2452068118083F1EEC4B59798, xmp.iid:944C91A90A2068118C14E9943789056C, xmp.iid:25F846642F20681180838CA18E32B1B2, xmp.iid:26F846642F20681180838CA18E32B1B2, xmp.iid:028CCFD73120681180838CA18E32B1B2, xmp.iid:038CCFD73120681180838CA18E32B1B2, xmp.iid:048CCFD73120681180838CA18E32B1B2, xmp.iid:098CCFD73120681180838CA18E32B1B2, xmp.iid:0A8CCFD73120681180838CA18E32B1B2, xmp.iid:0B8CCFD73120681180838CA18E32B1B2, xmp.iid:0C8CCFD73120681180838CA18E32B1B2, xmp.iid:74D13C263C20681180838CA18E32B1B2, xmp.iid:75D13C263C20681180838CA18E32B1B2, xmp.iid:76D13C263C20681180838CA18E32B1B2, xmp.iid:77D13C263C20681180838CA18E32B1B2, xmp.iid:78D13C263C20681180838CA18E32B1B2, xmp.iid:79D13C263C20681180838CA18E32B1B2, xmp.iid:7AD13C263C20681180838CA18E32B1B2, xmp.iid:7BD13C263C20681180838CA18E32B1B2, xmp.iid:7CD13C263C20681180838CA18E32B1B2, xmp.iid:7DD13C263C20681180838CA18E32B1B2, xmp.iid:7ED13C263C20681180838CA18E32B1B2, xmp.iid:F60320414320681180838CA18E32B1B2, xmp.iid:4D3E7CA50B2068118C14E36E86A491B6, xmp.iid:4E3E7CA50B2068118C14E36E86A491B6, xmp.iid:503E7CA50B2068118C14E36E86A491B6, xmp.iid:513E7CA50B2068118C14E36E86A491B6, xmp.iid:523E7CA50B2068118C14E36E86A491B6, xmp.iid:01801174072068118083AA76B50E57E7, xmp.iid:02801174072068118083AA76B50E57E7, xmp.iid:03801174072068118083AA76B50E57E7, xmp.iid:04801174072068118083AA76B50E57E7, xmp.iid:3E8E9352212068118083AA76B50E57E7, xmp.iid:3F8E9352212068118083AA76B50E57E7, xmp.iid:408E9352212068118083AA76B50E57E7, xmp.iid:D86E4AF3232068118083AA76B50E57E7, xmp.iid:D96E4AF3232068118083AA76B50E57E7, xmp.iid:DA6E4AF3232068118083AA76B50E57E7, xmp.iid:DB6E4AF3232068118083AA76B50E57E7, xmp.iid:0980117407206811808390BB7C4A4802, xmp.iid:0A80117407206811808390BB7C4A4802, xmp.iid:5CF4E53E10206811808390BB7C4A4802, xmp.iid:5DF4E53E10206811808390BB7C4A4802, xmp.iid:5EF4E53E10206811808390BB7C4A4802, xmp.iid:60F4E53E10206811808390BB7C4A4802, xmp.iid:62F4E53E10206811808390BB7C4A4802, xmp.iid:F82F771418206811808390BB7C4A4802, xmp.iid:FB2F771418206811808390BB7C4A4802, xmp.iid:FF2F771418206811808390BB7C4A4802, xmp.iid:94C057003D2068118083A1DB5C9B9C70, xmp.iid:95C057003D2068118083A1DB5C9B9C70, xmp.iid:96C057003D2068118083A1DB5C9B9C70, xmp.iid:97C057003D2068118083A1DB5C9B9C70, xmp.iid:05801174072068118C14B0FE6AE43927, xmp.iid:1D4B2EBD172068118C14CAD8809588E8, xmp.iid:FD7F11740720681180839D99F3060A4F, xmp.iid:FE7F11740720681180839D99F3060A4F, xmp.iid:FF7F11740720681180839D99F3060A4F, xmp.iid:008011740720681180839D99F3060A4F, xmp.iid:32D019CD1420681180839D99F3060A4F, xmp.iid:33D019CD1420681180839D99F3060A4F, xmp.iid:34D019CD1420681180839D99F3060A4F, xmp.iid:35D019CD1420681180839D99F3060A4F, xmp.iid:4A7A3F1B1D20681180839D99F3060A4F, xmp.iid:4B7A3F1B1D20681180839D99F3060A4F, xmp.iid:FC8CAC432720681180839D99F3060A4F, xmp.iid:FD8CAC432720681180839D99F3060A4F, xmp.iid:A353E29F3A2068118C14FB08BA0B5CAA, xmp.iid:565AC1F73C2068118083CF7EBDA9D13A, xmp.iid:575AC1F73C2068118083CF7EBDA9D13A, xmp.iid:349D1F20412068118C14A7421B575020, xmp.iid:359D1F20412068118C14A7421B575020, xmp.iid:369D1F20412068118C14A7421B575020, xmp.iid:379D1F20412068118C14A7421B575020, xmp.iid:78770A44422068118C14A7421B575020, xmp.iid:79770A44422068118C14A7421B575020, xmp.iid:F97F1174072068118083C56F976E2725, xmp.iid:FA7F1174072068118083C56F976E2725, xmp.iid:FB7F1174072068118083C56F976E2725, xmp.iid:FC7F1174072068118083C56F976E2725, xmp.iid:FD7F1174072068118083C56F976E2725, xmp.iid:FE7F1174072068118083C56F976E2725, xmp.iid:FF7F1174072068118083C56F976E2725, xmp.iid:00801174072068118083C56F976E2725, xmp.iid:22D751740C2068118083C56F976E2725, xmp.iid:23D751740C2068118083C56F976E2725, xmp.iid:24D751740C2068118083C56F976E2725, xmp.iid:25D751740C2068118083C56F976E2725, xmp.iid:26D751740C2068118083C56F976E2725, xmp.iid:27D751740C2068118083C56F976E2725, xmp.iid:28D751740C2068118083C56F976E2725, xmp.iid:29D751740C2068118083C56F976E2725, xmp.iid:2AD751740C2068118083C56F976E2725, xmp.iid:2BD751740C2068118083C56F976E2725, xmp.iid:4B1F09C4172068118083C56F976E2725, xmp.iid:4C1F09C4172068118083C56F976E2725, xmp.iid:4D1F09C4172068118083C56F976E2725, xmp.iid:4E1F09C4172068118083C56F976E2725, xmp.iid:4F1F09C4172068118083C56F976E2725, xmp.iid:501F09C4172068118083C56F976E2725, xmp.iid:511F09C4172068118083C56F976E2725, xmp.iid:521F09C4172068118083C56F976E2725, xmp.iid:531F09C4172068118083C56F976E2725, xmp.iid:57F4AF8E1C2068118083C56F976E2725, xmp.iid:58F4AF8E1C2068118083C56F976E2725, xmp.iid:0A026A3A2C2068118C1493D12DF8BEC0, xmp.iid:0B026A3A2C2068118C1493D12DF8BEC0, xmp.iid:CDF1EF54232068118A6D9FACF888D442, xmp.iid:CEF1EF54232068118A6D9FACF888D442, xmp.iid:01801174072068118083D9E2D56B7420, xmp.iid:04801174072068118083D9E2D56B7420, xmp.iid:0A801174072068118C14CC91DCBF3D5E, xmp.iid:E64C7AC5082068118C14CC91DCBF3D5E, xmp.iid:E94C7AC5082068118C14CC91DCBF3D5E, xmp.iid:E48244DB1220681180839040FD84B302, xmp.iid:A24388401A20681180839040FD84B302, xmp.iid:6E78CD242A20681180839040FD84B302, xmp.iid:6F78CD242A20681180839040FD84B302, xmp.iid:7878CD242A20681180839040FD84B302, xmp.iid:D62A16DB2E20681180839040FD84B302, xmp.iid:D72A16DB2E20681180839040FD84B302, xmp.iid:46D4889E202068118C14E4521C0E821D, xmp.iid:49D4889E202068118C14E4521C0E821D, xmp.iid:4CD4889E202068118C14E4521C0E821D, xmp.iid:FB7F1174072068118083DCC9BFEBB762, xmp.iid:00801174072068118083DCC9BFEBB762, xmp.iid:46AD587B082068118083DCC9BFEBB762, xmp.iid:545BA5680F2068118083A50FF0BD90CB, xmp.iid:B0AF7143202068118083A50FF0BD90CB, xmp.iid:8CB09D993D2068118083A50FF0BD90CB, xmp.iid:FB7F1174072068118083A672BEF13313, xmp.iid:00801174072068118083A672BEF13313, xmp.iid:2B83E8F61D2068118083A672BEF13313, xmp.iid:B1F01D40252068118083A672BEF13313, xmp.iid:A1A71106322068118083A672BEF13313, xmp.iid:A6A71106322068118083A672BEF13313, xmp.iid:C4B439E4362068118083906910AE48B6, xmp.iid:C9B439E4362068118083906910AE48B6, xmp.iid:6131E7EF342068118083998659B2B706, xmp.iid:6631E7EF342068118083998659B2B706, xmp.iid:269F6B2C0F2068118A6DB7957004CFFB, xmp.iid:7CBE4B22132068118A6DB7957004CFFB, xmp.iid:81BE4B22132068118A6DB7957004CFFB, xmp.iid:BD6E7745132068118A6DB7957004CFFB, xmp.iid:E470682C322068118C14AD3558380D2E, xmp.iid:C1ADF625112068118C14D066CA91AA62, xmp.iid:28DC51EA122068118C14DCED664B3771, xmp.iid:33247810142068118C14DCED664B3771, xmp.iid:667EE11E142068118C14DCED664B3771, xmp.iid:6C7EE11E142068118C14DCED664B3771, xmp.iid:77F1E0E5152068118C14DCED664B3771, xmp.iid:7DF1E0E5152068118C14DCED664B3771, xmp.iid:C038DB51162068118C14DCED664B3771, xmp.iid:C638DB51162068118C14DCED664B3771, xmp.iid:ABF1C681162068118C14DCED664B3771, xmp.iid:E60C66CB082068118C14930E1F494EB0, xmp.iid:E70C66CB082068118C14930E1F494EB0 History When : 2010:10:05 09:43:37-07:00, 2010:10:05 09:43:37-07:00, 2010:10:07 09:22:33-07:00, 2010:10:07 09:22:33-07:00, 2010:10:07 09:42:21-07:00, 2010:10:07 10:45:06-07:00, 2010:10:07 10:54:35-07:00, 2010:10:15 15:09:28-07:00, 2010:10:15 15:57:24-07:00, 2010:10:15 16:23:14-07:00, 2010:10:15 16:29:39-07:00, 2010:10:15 16:33:36-07:00, 2010:10:20 09:52:13-07:00, 2010:10:26 14:16:31-07:00, 2010:10:26 14:16:31-07:00, 2010:10:26 14:26:42-07:00, 2010:10:26 14:39:21-07:00, 2010:10:26 14:42:26-07:00, 2010:10:26 14:58:18-07:00, 2010:10:26 14:58:18-07:00, 2010:10:26 14:58:29-07:00, 2010:10:26 15:34:35-07:00, 2010:10:26 15:40:29-07:00, 2010:10:26 15:49:51-07:00, 2010:10:26 15:51:21-07:00, 2010:10:26 15:51:52-07:00, 2010:10:26 16:09:15-07:00, 2010:10:26 16:09:15-07:00, 2010:10:26 16:19:44-07:00, 2010:10:26 16:19:44-07:00, 2010:10:26 16:20:22-07:00, 2010:10:26 16:20:22-07:00, 2010:10:26 16:30:45-07:00, 2010:10:26 16:31:21-07:00, 2010:10:27 09:50:26-07:00, 2010:10:27 09:50:26-07:00, 2010:10:27 09:57:23-07:00, 2010:10:27 09:57:43-07:00, 2010:10:27 09:57:43-07:00, 2010:10:28 10:40:15-07:00, 2010:10:28 10:40:15-07:00, 2010:10:28 10:40:23-07:00, 2010:10:28 10:40:23-07:00, 2010:10:28 14:01:19-07:00, 2010:10:28 14:02:30-07:00, 2010:10:28 14:03:15-07:00, 2010:10:28 14:04:15-07:00, 2010:10:28 14:06:24-07:00, 2010:10:28 14:07:38-07:00, 2010:10:28 14:07:38-07:00, 2010:10:29 09:42:42-07:00, 2010:10:29 09:55:14-07:00, 2010:10:29 09:55:14-07:00, 2010:10:29 09:55:23-07:00, 2010:10:29 09:55:23-07:00, 2010:10:29 10:19:45-07:00, 2010:10:29 10:20:29-07:00, 2010:10:29 10:51:19-07:00, 2010:10:29 10:54:33-07:00, 2010:10:29 11:58:12-07:00, 2010:12:13 13:50:54-08:00, 2010:12:13 13:50:54-08:00, 2010:12:13 13:51:01-08:00, 2010:12:13 13:51:01-08:00, 2010:12:15 11:47:18-08:00, 2010:12:20 10:05:20-08:00, 2010:12:22 09:05:26-08:00, 2010:12:22 09:05:26-08:00, 2010:12:22 09:40:10-08:00, 2010:12:22 09:42:41-08:00, 2010:12:22 09:48:57-08:00, 2010:12:22 09:48:57-08:00, 2010:12:22 09:49:02-08:00, 2010:12:22 09:49:02-08:00, 2010:12:22 10:48:37-08:00, 2010:12:22 10:48:37-08:00, 2010:12:22 12:05:37-08:00, 2010:12:22 12:05:37-08:00, 2011:01:04 14:25:20-08:00, 2011:03:18 15:51:03-07:00, 2011:03:18 15:51:03-07:00, 2011:03:21 15:18:56-07:00, 2011:03:21 15:18:56-07:00, 2011:03:21 15:19:05-07:00, 2011:03:21 15:19:05-07:00, 2011:03:21 15:25:35-07:00, 2011:03:21 15:41:49-07:00, 2011:03:22 08:36:12-07:00, 2011:03:22 08:37:43-07:00, 2011:03:22 08:42:03-07:00, 2011:03:22 08:43:19-07:00, 2011:03:22 08:46:37-07:00, 2011:03:22 08:47:14-07:00, 2011:03:22 09:01:15-07:00, 2011:03:22 09:01:28-07:00, 2011:03:22 09:01:28-07:00, 2011:03:22 09:04:49-07:00, 2011:03:22 09:26:15-07:00, 2011:03:22 09:29:15-07:00, 2011:03:22 09:42:23-07:00, 2011:03:22 09:43:30-07:00, 2011:03:22 09:47-07:00, 2011:03:22 09:49:33-07:00, 2011:03:22 09:50:59-07:00, 2011:03:22 09:59:50-07:00, 2011:03:22 10:25:38-07:00, 2011:03:22 10:27:31-07:00, 2011:03:22 10:37-07:00, 2011:03:22 10:39:02-07:00, 2011:03:22 10:40:03-07:00, 2011:03:22 10:40:45-07:00, 2011:03:22 10:49:42-07:00, 2011:03:22 10:54:19-07:00, 2011:03:22 10:54:32-07:00, 2011:03:22 10:57:21-07:00, 2011:03:22 10:57:21-07:00, 2011:03:25 15:49:43-07:00, 2011:03:25 15:49:43-07:00, 2011:03:28 14:23:13-07:00, 2011:03:28 14:23:13-07:00, 2011:03:31 09:14:38-07:00, 2011:03:31 09:14:38-07:00, 2011:04:04 08:11:08-07:00, 2011:04:04 08:12:43-07:00, 2011:04:04 08:12:43-07:00, 2011:04:05 10:28:57-07:00, 2011:04:05 10:28:57-07:00, 2011:04:05 12:22:42-07:00, 2011:04:05 12:22:42-07:00, 2011:04:05 12:22:55-07:00, 2011:04:05 12:56:26-07:00, 2011:04:05 12:56:26-07:00, 2011:04:06 12:51:11-07:00, 2011:04:06 13:58:47-07:00, 2011:04:06 15:03:38-07:00, 2011:04:07 09:35:05-07:00, 2011:04:07 09:40:09-07:00, 2011:04:07 09:42:26-07:00, 2011:04:08 10:56:56-07:00, 2011:04:08 11:55:57-07:00, 2011:04:08 15:30:19-07:00, 2011:04:11 09:00:21-07:00, 2011:04:11 09:06:48-07:00, 2011:04:11 11:55:58-07:00, 2011:04:11 13:56:58-07:00, 2011:04:11 14:24:45-07:00, 2011:04:11 14:41:47-07:00, 2011:04:12 14:16:22-07:00, 2011:04:12 15:02:39-07:00, 2011:04:25 14:37:22-07:00, 2011:04:25 14:40-07:00, 2011:04:28 09:17:51-07:00, 2011:04:28 09:20:01-07:00, 2011:04:28 09:20:39-07:00, 2011:04:28 09:21-07:00, 2011:05:23 15:28:21-07:00, 2011:06:09 09:08:22-07:00, 2012:07:31 09:38:27-07:00, 2012:07:31 09:44:42-07:00, 2012:07:31 09:45:06-07:00, 2012:07:31 09:51:55-07:00, 2012:07:31 09:57:49-07:00, 2012:07:31 09:58:43-07:00, 2012:07:31 10:00:50-07:00, 2012:07:31 10:01:16-07:00, 2012:07:31 10:02:11-07:00, 2012:07:31 11:33:37-07:00, 2012:07:31 11:33:49-07:00 History Software Agent : Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0 History Changed : /;/metadata, /metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /metadata, /metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /metadata, /metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /metadata, /metadata, /, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /metadata, /metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata Metadata Date : 2012:07:31 11:34:38-07:00 Creator Tool : Adobe InDesign CS5 (7.0.4) Doc Change Count : 49777 Format : application/pdf Producer : Adobe PDF Library 9.9 Trapped : False Page Count : 12EXIF Metadata provided by EXIF.tools