Harbor Freight Assorted Aluminum Polishing Kit With 1 4 In Shank 14 Pc Product Manual
Manual for the 98707 14 Piece Aluminum Polishing Kit 98707 Aluminum Polishing Tool Kit - 14 Piece
2015-05-27
: Harbor-Freight Harbor-Freight-Assorted-Aluminum-Polishing-Kit-With-1-4-In-Shank-14-Pc-Product-Manual-723254 harbor-freight-assorted-aluminum-polishing-kit-with-1-4-in-shank-14-pc-product-manual-723254 harbor-freight pdf
Open the PDF directly: View PDF 
.
Page Count: 2
| Download | |
| Open PDF In Browser | View PDF |
14 pc. Aluminum Polishing Kit Item 98707 Read this material before using this product. Failure to do so can result in serious injury. Save this manual. When unpacking, make sure that the product is intact and undamaged. If any parts are missing or broken, please call 1-800-444-3353 as soon as possible. Visit our website at: http://www.harborfreight.com Email our technical support at: tech@harborfreight.com Copyright© 2008 by Harbor Freight Tools®. All rights reserved. No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly from the product described herein. Tools required for assembly and service may not be included. Manual Revised 11g Polishing Instructions Specifications Description Part MAX RPM QTY 1. Remove deep scratches from the workpiece and clean thoroughly to remove any dirt, grease or oil. 1 4" Diameter Buffing Wheel 2,800 1 2. Clamp firmly in place. 2 2-1/2" Diameter Buffing Wheel 2,800 1 3 3" Diameter Polishing Wheel 2,800 1 4 2-1/4" L X 2" D to 1-1/4" D Tapered Buffer 2,800 1 3. Connect the chosen accessory (Part 1 11) to an electric drill (sold separately). Set the drill speed at or below the maximum RPM for the accessory. 5 1-3/4" L X 1-3/4" D Cylindrical Buffer 2,800 1 6 2-3/4" D Mushroom Style Buffer 2,800 1 7 2-1/4" L X 3/4" D Ball Type Felt Bob 20,000 1 8 2-3/4" L X 3/4" D Bullet Type Felt Bob 20,000 1 9 2-7/16" L X 3/4" D Pear (Balloon) Type Felt Bob 20,000 1 10 2-3/8" L X 1" D Wide Cone (Dome) Type Felt Bob 20,000 1 11 2-1/2" L X 3/4" D Cone Type Felt Bob 20,000 1 12 Black Emery Compound (For Hard Buffing Wheels - Coarse) 1 13 Brown Tripoli Compound (For Rough Buffing - Medium) 1 14 White Aluminum Oxide Compound (Fine) 1 Safety Information 4. Turn on the drill. When the accessory is rotating at full speed, gently rub the buffing compound against the rotating pad to load the accessory with the polishing medium. Note: Use the appropriate buffing compound for the job. Do not mix compounds on the same accessory. Coarser compounds mixed with finer compounds will scratch the surface when polishing. Begin with the coarse compound, then work up to the finest compound, thoroughly cleaning the workpiece and switching wheels before changing to the next compound. See Specifications at left for compound types. 5. Slowly move the accessory over the workpiece. Keep the accessory moving to avoid an uneven finish. 6. When finished with the compound loaded accessory, repeat the process using a clean accessory to clean any compound residue. 1. Do not exceed the stated maximum RPM for each item. 2. Wear ANSI-approved safety goggles during use. 3. Keep bystanders out of the work area during use. 4. Inspect before use; do not use if parts are loose or damaged. SKU 98707 For technical questions, please call 1-800-444-3353. Page 2
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes XMP Toolkit : Adobe XMP Core 5.0-c060 61.134777, 2010/02/12-17:32:00 Instance ID : uuid:963a45b1-eeaa-9342-b479-c7cf3c9b4c89 Document ID : xmp.did:CB1F3D7F0E20681180838269C951D955 Original Document ID : adobe:docid:indd:d8587ae1-26b9-11dd-b93a-efee23c4af74 Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:C81F3D7F0E20681180838269C951D955 Derived From Document ID : adobe:docid:indd:d8587ae1-26b9-11dd-b93a-efee23c4af74 Derived From Original Document ID: adobe:docid:indd:d8587ae1-26b9-11dd-b93a-efee23c4af74 Derived From Rendition Class : default History Action : saved, saved, saved, saved, saved, saved, saved History Instance ID : xmp.iid:603C31372A20681180839D1C98225754, xmp.iid:613C31372A20681180839D1C98225754, xmp.iid:C81F3D7F0E20681180838269C951D955, xmp.iid:CB1F3D7F0E20681180838269C951D955, xmp.iid:CE1F3D7F0E20681180838269C951D955, xmp.iid:D11F3D7F0E20681180838269C951D955, xmp.iid:8638D0FF1E20681180838269C951D955 History When : 2011:07:22 15:44:44-07:00, 2011:07:22 15:44:44-07:00, 2011:07:25 10:42:25-07:00, 2011:07:25 10:42:25-07:00, 2011:07:25 11:52:43-07:00, 2011:07:25 12:27:45-07:00, 2011:07:25 12:40:32-07:00 History Software Agent : Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0 History Changed : /;/metadata, /metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata Create Date : 2011:07:25 12:40:45-07:00 Modify Date : 2011:07:25 12:40:46-07:00 Metadata Date : 2011:07:25 12:40:46-07:00 Creator Tool : Adobe InDesign CS5 (7.0) Page Image Page Number : 1, 2 Page Image Format : JPEG, JPEG Page Image Width : 256, 256 Page Image Height : 256, 256 Page Image : (Binary data 9168 bytes, use -b option to extract), (Binary data 11011 bytes, use -b option to extract) Doc Change Count : 2629 Format : application/pdf Producer : Adobe PDF Library 9.9 Trapped : False Page Count : 2 Creator : Adobe InDesign CS5 (7.0)EXIF Metadata provided by EXIF.tools