Harbor Freight Bigfoot Panel Wagon Product Manual

: Harbor-Freight Harbor-Freight-Bigfoot-Panel-Wagon-Product-Manual-724101 harbor-freight-bigfoot-panel-wagon-product-manual-724101 harbor-freight pdf

Open the PDF directly: View PDF .
Page Count: 8

Visit our website at: http://www.harborfreight.com

Email our technical support at: productsupport@harborfreight.com

REV 14g

ITEM 62375

BIGFOOT PANEL

WAGON

Owner’s Manual & Safety Instructions

Save This Manual Keep this manual for the safety warnings and precautions, assembly,

operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the

back of the manual near the assembly diagram (or month and year of purchase if product has no number).

Keep this manual and the receipt in a safe and dry place for future reference.

When unpacking, make sure that the product is intact

and undamaged. If any parts are missing or broken,

please call 1-888-866-5797 as soon as possible.

Copyright© 2014 by Harbor Freight Tools®. All rights reserved.

No portion of this manual or any artwork contained herein may be reproduced in

any shape or form without the express written consent of Harbor Freight Tools.

Diagrams within this manual may not be drawn proportionally. Due to continuing

improvements, actual product may differ slightly from the product described herein.

Tools required for assembly and service may not be included.

Read this material before using this product.

Failure to do so can result in serious injury.

SAVE THIS MANUAL.

Page 2 For technical questions, please call 1-888-866-5797. Item 62375

Specifications

Tires 10″ Pneumatic

Age Range 5 and up

Weight Capacity 300 lb

Deck Size 32″ x 13-3/4″ x 5-1/2″

Inside Dimensions 29-7/8″ x 11-3/4″ x 4″

Replacement Wheels Harbor Freight Item 30900

Page 3For technical questions, please call 1-888-866-5797.Item 62375

IMPORTANT SAFETY INFORMATION

Assembly Precautions

1. Assemble only according to these instructions.

Improper assembly can create hazards.

2. Wear ANSI-approved safety goggles and

heavy-duty work gloves during assembly.

3. Keep assembly area clean and well lit.

4. Keep bystanders out of the area during assembly.

5. Do not assemble when tired or when under the

influence of alcohol, drugs or medication.

6. Weight capacity and other product capabilities apply

to properly and completely assembled product only.

Use Precautions

1. AGES 5 AND UP ONLY.

Do not allow younger children to use.

2. WEAR PROPER SAFETY HELMET AND

COMPLETE SAFETY GEAR WHEN RIDING.

3. Responsible adult must supervise during use.

4. Rider must stay seated at all times during use.

5. Do not allow more than one child

to play with wagon at once.

6. Do not use in unstable or dangerous area.

Tipping over can cause injury.

7. Do not use in areas where vehicles may be present,

such as parking areas, driveways, or roads.

8. Assemble completely according to instructions

before allowing a child to play with this product.

9. Use as intended only.

10. Inspect before every use; do not use

if parts are loose or damaged.

11. Do not exceed listed weight capacity.

Be aware of dynamic loading!

Sudden load movement may briefly create

excess load causing product failure.

12. Maintain product labels and nameplates.

These carry important safety information.

If unreadable or missing, contact

Harbor Freight Tools for a replacement.

Page 4 For technical questions, please call 1-888-866-5797. Item 62375

Assembly Instructions

Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this document

including all text under subheadings therein before set up or use of this product.

Note: For additional information regarding the parts listed

in the following pages, refer to the Assembly Diagram.

Note: Do not overtighten hardware.

1. Bolt the Front Axle Support (6) to the wagon Bed (1)

with Bolts (14), Washers (15), and Lock Nuts (16).

2. Connect the front axles with the Short

Support Braces (7). Fasten with Bolts (18),

Washers (15) and Lock Nuts (16).

3. As shown in Figure A, push one side of the Yoke (8)

onto the center stud of the Front Axle Support (6)

and fasten it with a Washer (23) and Lock Pin (24).

Yoke

(8)

Front Axle

Support (6)

Lock Pin (24)

center

stud

Figure A

4. Attach the other side of the Yoke to the Front

Axle Support, the Short Support Brace and

the Long Support Brace (25) using Bolts (17),

Washer (15) and Lock Nut (16). See Figure B.

Yoke

(8) Front Axle

Support (6)

Long

Support

Brace (25)

Figure B

Page 5For technical questions, please call 1-888-866-5797.Item 62375

Handle (5)

Short Support

Brace (7)

Long Support

Brace (25)

Yoke (8)

Figure C

5. Bolt the Handle (5) to the Yoke using Bolts (19),

Washers (15) and Lock Nuts (16). See Figure C.

6. Attach the Rear Support (9) to the wagon Bed (1)

using Bolts (14), Washers (15) and Lock Nuts (16).

7. Attach the Long Support Brace (25) to the Rear

Support using Bolts (17), Washers (15) and

Lock Nuts (16), and to the wagon Bed (1) using

Bolts (14), Washers (15) and Lock Nuts (16).

8. For each Wheel (10), slide the wheel onto

the axle with the valve stem facing out,

then secure with Washers (22), Spring

Washers (20) and Lock Nuts (21)

9. Turn the cart upright.

10. Attach one of the Long Side Panels (2) to the wagon

with three Bolts (11) going through both the Bed

and each vertical slat. The top of the Bolts should

be on the inside of the Bed. Tighten each into

place with a Washer (12) then a Lock Nut (13).

11. Attach the Short Rear Panel (3) to the wagon

with two Bolts (11) going through the Bed and

each vertical slat. Tighten into place with a

Washer and Lock Nut as previously described.

Note: The Short Front Panel (4) is the one

with a downward curved front slat.

12. Attach the second Long Side Panel (2) .

Attach the Short Front Panel (4) with two

Bolts (11). Tighten into place with a Washer

and Lock Nut as previously described.

Page 6 For technical questions, please call 1-888-866-5797. Item 62375

Parts List and Diagram

Parts List

Part Description Qty

1 Bed 1

2 Side Panel 2

3 Back Panel 1

4 Front Panel 1

5 Handle 1

6Front Axle Support 1

7 Short Support Brace 1

8 Yoke 1

9Rear Axle Support 1

10 Wheel 4

11 Bolt M5*45 10

12 Washer Ø5 10

13 Lock Nut M5 10

Part Description Qty

14 Phillips Bolt M8*20 6

15 Washer Ø8 12

16 Lock Nut M8 12

17 Bolt M8*25 2

18 Bolt M8*20 3

19 Bolt M8*40 1

20 Spring Washer Ø12 4

21 Cap Nut M12 4

22 Washer Ø12 4

23 Washer Ø10 1

24 Lock Pin 1

25 Long Support Brace 1

Record Serial Number Here:

Note: If product has no serial number, record

month and year of purchase instead.

Note: Some parts are listed and shown for

illustration purposes only, and are not available

individually as replacement parts.

Page 7For technical questions, please call 1-888-866-5797.Item 62375

Assembly Diagram

22

16

20

21

13

10

9

214

32

14

11

15

15

7

6

24

23 8

18

25

16

16

17

15

16

15

19

5

12

17

3491 Mission Oaks Blvd. • PO Box 6009 • Camarillo, CA 93011 • 1-888-866-5797

PLEASE READ THE FOLLOWING CAREFULLY

THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM

IN THIS DOCUMENT AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR

MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS

QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED TO REPLACE

ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY

STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND

LICENSED TECHNICIANS, AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY

ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS

THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO.

Limited 90 Day Warranty

Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards,

and warrants to the original purchaser that this product is free from defects in materials and workmanship for the

period of 90 days from the date of purchase. This warranty does not apply to damage due directly or indirectly,

to misuse, abuse, negligence or accidents, repairs or alterations outside our facilities, criminal activity, improper

installation, normal wear and tear, or to lack of maintenance. We shall in no event be liable for death, injuries

to persons or property, or for incidental, contingent, special or consequential damages arising from the use of

our product. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the

above limitation of exclusion may not apply to you. THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER

WARRANTIES, EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS.

To take advantage of this warranty, the product or part must be returned to us with transportation charges

prepaid. Proof of purchase date and an explanation of the complaint must accompany the merchandise.

If our inspection verifies the defect, we will either repair or replace the product at our election or we may

elect to refund the purchase price if we cannot readily and quickly provide you with a replacement. We will

return repaired products at our expense, but if we determine there is no defect, or that the defect resulted

from causes not within the scope of our warranty, then you must bear the cost of returning the product.

This warranty gives you specific legal rights and you may also have other rights which vary from state to state.