Harbor Freight Bigfoot Panel Wagon Product Manual

2015-05-27

: Harbor-Freight Harbor-Freight-Bigfoot-Panel-Wagon-Product-Manual-724101 harbor-freight-bigfoot-panel-wagon-product-manual-724101 harbor-freight pdf

Open the PDF directly: View PDF .
Page Count: 8

Download
Open PDF In Browser	View PDF

Owner’s Manual & Safety Instructions
Save This Manual Keep this manual for the safety warnings and precautions, assembly,

operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference.

BIGFOOT PANEL

WAGON

REV 14g

Visit our website at: http://www.harborfreight.com
Email our technical support at: productsupport@harborfreight.com

ITEM 62375

When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
Copyright© 2014 by Harbor Freight Tools®. All rights reserved.
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.

Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.

Specifications

Page 2

Tires

10″ Pneumatic

Age Range

5 and up

Weight Capacity

300 lb

Deck Size

32″ x 13-3/4″ x 5-1/2″

Inside Dimensions

29-7/8″ x 11-3/4″ x 4″

Replacement Wheels

Harbor Freight Item 30900

For technical questions, please call 1-888-866-5797.

Item 62375

IMPORTANT SAFETY INFORMATION
Assembly Precautions
1. Assemble only according to these instructions.
Improper assembly can create hazards.
2. Wear ANSI-approved safety goggles and
heavy-duty work gloves during assembly.
3. Keep assembly area clean and well lit.

4. Keep bystanders out of the area during assembly.
5. Do not assemble when tired or when under the
influence of alcohol, drugs or medication.
6. Weight capacity and other product capabilities apply
to properly and completely assembled product only.

Use Precautions
1. AGES 5 AND UP ONLY.
Do not allow younger children to use.

8. Assemble completely according to instructions
before allowing a child to play with this product.

2. WEAR PROPER SAFETY HELMET AND
COMPLETE SAFETY GEAR WHEN RIDING.

9. Use as intended only.

3. Responsible adult must supervise during use.
4. Rider must stay seated at all times during use.
5. Do not allow more than one child
to play with wagon at once.
6. Do not use in unstable or dangerous area.
Tipping over can cause injury.
7. Do not use in areas where vehicles may be present,
such as parking areas, driveways, or roads.

Item 62375

10. Inspect before every use; do not use
if parts are loose or damaged.
11. Do not exceed listed weight capacity.
Be aware of dynamic loading!
Sudden load movement may briefly create
excess load causing product failure.
12. Maintain product labels and nameplates.
These carry important safety information.
If unreadable or missing, contact
Harbor Freight Tools for a replacement.

For technical questions, please call 1-888-866-5797.

Page 3

Assembly Instructions
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this document
including all text under subheadings therein before set up or use of this product.
Note: For additional information regarding the parts listed
in the following pages, refer to the Assembly Diagram.
Note: Do not overtighten hardware.

4. Attach the other side of the Yoke to the Front
Axle Support, the Short Support Brace and
the Long Support Brace (25) using Bolts (17),
Washer (15) and Lock Nut (16). See Figure B.

1. Bolt the Front Axle Support (6) to the wagon Bed (1)
with Bolts (14), Washers (15), and Lock Nuts (16).
2. Connect the front axles with the Short
Support Braces (7). Fasten with Bolts (18),
Washers (15) and Lock Nuts (16).
3. As shown in Figure A, push one side of the Yoke (8)
onto the center stud of the Front Axle Support (6)
and fasten it with a Washer (23) and Lock Pin (24).
Long
Support
Brace (25)
Front Axle
Support (6)

center
stud

Yoke
(8)

Front Axle
Support (6)

Lock Pin (24)

Figure A

Figure B

Page 4

For technical questions, please call 1-888-866-5797.

Item 62375

Yoke (8)
Handle (5)

Short Support
Brace (7)

Long Support
Brace (25)
Figure C

6. Attach the Rear Support (9) to the wagon Bed (1)
using Bolts (14), Washers (15) and Lock Nuts (16).

10. Attach one of the Long Side Panels (2) to the wagon
with three Bolts (11) going through both the Bed
and each vertical slat. The top of the Bolts should
be on the inside of the Bed. Tighten each into
place with a Washer (12) then a Lock Nut (13).

7. Attach the Long Support Brace (25) to the Rear
Support using Bolts (17), Washers (15) and
Lock Nuts (16), and to the wagon Bed (1) using
Bolts (14), Washers (15) and Lock Nuts (16).

11. Attach the Short Rear Panel (3) to the wagon
with two Bolts (11) going through the Bed and
each vertical slat. Tighten into place with a
Washer and Lock Nut as previously described.

5. Bolt the Handle (5) to the Yoke using Bolts (19),
Washers (15) and Lock Nuts (16). See Figure C.

8. For each Wheel (10), slide the wheel onto
the axle with the valve stem facing out,
then secure with Washers (22), Spring
Washers (20) and Lock Nuts (21)
9. Turn the cart upright.

Item 62375

Note: The Short Front Panel (4) is the one
with a downward curved front slat.
12. Attach the second Long Side Panel (2) .
Attach the Short Front Panel (4) with two
Bolts (11). Tighten into place with a Washer
and Lock Nut as previously described.

For technical questions, please call 1-888-866-5797.

Page 5

Parts List and Diagram

Parts List
Part
1
2
3
4
5
6
7
8
9
10
11
12
13

Description

Bed
Side Panel
Back Panel
Front Panel
Handle
Front Axle Support
Short Support Brace
Yoke
Rear Axle Support
Wheel
Bolt M5*45
Washer Ø5
Lock Nut M5

Qty
1
2
1
1
1
1
1
1
1
4
10
10
10

Part
14
15
16
17
18
19
20
21
22
23
24
25

Description

Qty

Phillips Bolt M8*20
Washer Ø8
Lock Nut M8
Bolt M8*25
Bolt M8*20
Bolt M8*40
Spring Washer Ø12
Cap Nut M12
Washer Ø12
Washer Ø10
Lock Pin
Long Support Brace

6
12
12
2
3
1
4
4
4
1
1
1

Record Serial Number Here:

Note: If product has no serial number, record
month and year of purchase instead.

Page 6

Note: Some parts are listed and shown for
illustration purposes only, and are not available
individually as replacement parts.

For technical questions, please call 1-888-866-5797.

Item 62375

Assembly Diagram

10
9

3
14

20
22

16
6

15
17

16
15
19

Item 62375

For technical questions, please call 1-888-866-5797.

Page 7

PLEASE READ THE FOLLOWING CAREFULLY
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM
IN THIS DOCUMENT AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR
MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS
QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED TO REPLACE
ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY
STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND
LICENSED TECHNICIANS, AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY
ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS
THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO.

Limited 90 Day Warranty
Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards,
and warrants to the original purchaser that this product is free from defects in materials and workmanship for the
period of 90 days from the date of purchase. This warranty does not apply to damage due directly or indirectly,
to misuse, abuse, negligence or accidents, repairs or alterations outside our facilities, criminal activity, improper
installation, normal wear and tear, or to lack of maintenance. We shall in no event be liable for death, injuries
to persons or property, or for incidental, contingent, special or consequential damages arising from the use of
our product. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the
above limitation of exclusion may not apply to you. THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER
WARRANTIES, EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS.
To take advantage of this warranty, the product or part must be returned to us with transportation charges
prepaid. Proof of purchase date and an explanation of the complaint must accompany the merchandise.
If our inspection verifies the defect, we will either repair or replace the product at our election or we may
elect to refund the purchase price if we cannot readily and quickly provide you with a replacement. We will
return repaired products at our expense, but if we determine there is no defect, or that the defect resulted
from causes not within the scope of our warranty, then you must bear the cost of returning the product.
This warranty gives you specific legal rights and you may also have other rights which vary from state to state.

3491 Mission Oaks Blvd. • PO Box 6009 • Camarillo, CA 93011 • 1-888-866-5797

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : Yes
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 5.6-c011 79.156289, 2014/03/31-23:39:12
Instance ID                     : uuid:d0aa3d39-f237-6a4c-9661-c6df4c62208b
Original Document ID            : adobe:docid:indd:2947f79c-bab0-11df-a4dc-d1b6dbadcc65
Document ID                     : xmp.id:42a491f4-0028-4ee2-8501-89fdc3b8f759
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:8b14d52d-c8cc-484d-97c9-ecb76769c8e3
Derived From Document ID        : xmp.did:ad9608fc-e508-4eb4-9532-2fedc2b3f013
Derived From Original Document ID: adobe:docid:indd:2947f79c-bab0-11df-a4dc-d1b6dbadcc65
Derived From Rendition Class    : default
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CC 2014 (Macintosh)
History Changed                 : /
History When                    : 2014:07:23 08:47:02-07:00
Create Date                     : 2014:07:23 08:47:02-07:00
Modify Date                     : 2014:07:23 08:47:09-07:00
Metadata Date                   : 2014:07:23 08:47:09-07:00
Creator Tool                    : Adobe InDesign CC 2014 (Macintosh)
Format                          : application/pdf
Rights                          : Copyright©2014 by Harbor Freight Tools®.  All rights reserved.  No portion of this document or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools.
Subject                         : 04.10.06.05
Creator                         : Adobe
Web Statement                   : http://www.harborfreight.com
Marked                          : True
Producer                        : Adobe PDF Library 11.0
Trapped                         : False
Page Count                      : 8
Author                          : Adobe

EXIF Metadata provided by EXIF.tools

Harbor Freight Bigfoot Panel Wagon Product Manual

Navigation menu

Versions of this User Manual:

Views

Navigation