Harbor Freight Double Tube Flaring Tool Kit Product Manual

: Harbor-Freight Harbor-Freight-Double-Tube-Flaring-Tool-Kit-Product-Manual-723450 harbor-freight-double-tube-flaring-tool-kit-product-manual-723450 harbor-freight pdf

Open the PDF directly: View PDF .
Page Count: 4

Double Tube

Flaring Tool Kit

66534 Flaring Tool Kit

INSTRUCTIONS AND

PRECAUTIONS

Visit our website at:

http://www.harborfreight.com

Read this material before

using this product.

Failure to do so can result

in serious injury.

SAVE THIS MANUAL.

When unpacking, make sure

that the product is intact and

undamaged.

If any parts are missing or broken,

please call 1‑800‑444‑3353

as soon as possible.

Copyright© 2009 by Harbor Freight Tools®.

All rights reserved. No portion of this document

or any artwork contained herein may be

reproduced in any shape or form without the

express written consent of Harbor Freight

Tools. Diagrams within this document may

not be drawn proportionally. Due to continuing

improvements, actual product may differ slightly

from the product described herein. Tools required

for assembly and service may not be included.

For technical questions or replacement

parts, please call 1‑800‑444‑3353.

Manual Revised 11c

Page 2For technical questions, please call 1‑800‑444‑3353.SKU 66534

Important Safety Information

1. Assemble and use only according

to these instructions. Improper

assembly or use can create hazards.

2. Wear ANSI‑approved safety

goggles and heavy‑duty work

gloves during assembly and use.

3. Keep assembly and use

area clean and well lit.

4. Keep bystanders out of the area

during assembly or use.

5. Do not assemble or use when

tired or when under the inuence

of drugs or medication.

6. This product is not a toy. Do not allow

children to play with or near this item.

7. Use for intended purpose(s) only.

8. Inspect before use; do not

use if parts are damaged.

9. Maintain product labels and

nameplates. These carry important

safety information. If unreadable

or missing, contact Harbor Freight

Tools for a replacement.

Operating Instructions

Read the ENTIRE IMPORTANT

SAFETY INFORMATION

section at the beginning of

this document including all

text under subheadings therein

before set up or use of

this product.

1. This tool is used to create a double

ared end on Copper, Aluminum,

Soft Steel and Brass tubing.

2. You may are tubing from

3/16” to 5/8” in diameter.

3. Prepare the tube by making a

clean cut straight across the tube.

Deburr inner and outer edges.

4. Back off the Compression Cone and

the pivoting wing nut and then slide

Yoke (1) over Screen Bar Assembly (2).

5. Place the are connector nut (not

included) over the tube before aring.

6. Insert the prepared tubing into the

proper‑size hole in the Screen Bar.

Allow the end of the tube to protrude.

7. The end of the tube must protrude

above the top of the bar as much

as the height of the shoulder of

the Adapter. On the two smallest

Adapters, the tube protrusion is equal

to the large adapter shoulder.

8. After setting the tubing height, tighten

the Screen Bar Assembly on the tube

by tightening the two Wing Nuts.

Installing the Yoke

Shoulder

Button

Adapters

Page 3For technical questions, please call 1‑800‑444‑3353.SKU 66534

Note: Use Button Adapters to create double

ared ends for stronger support.

9. Lightly oil the appropriate sized

Adapter and insert it into the end

of the tube, button end down.

10.

Yoke positioned

on Adapter

Position the Yoke on the Screen

Bar over the Adapter.

11. Turn the Handle of the Yoke driving

the Adapter into the end of the

tube. The tube will are. Continue

aring until the shoulder of the

Adapter touches the Screen Bar.

12. Back off the Yoke enough to

remove the Adapter. The rst

are has now been made.

13. Screw the Yoke down again on the end

of the tube until the tubing folds back on

itself, forming a 45 degree double are.

14. Clean and lightly lubricate the tool, and

store it out of reach of children.

Maintenance and Servicing

1. Before each use, inspect general

condition of tool. Check for

misalignment or binding of moving

parts, cracked or broken parts,

and any other condition that may

affect its safe operation. Do not

use damaged equipment.

2. After use, clean external surfaces.

Then dry and lubricate all moving

parts. Do not use solvents.

3. When storing, keep Flaring Tool and

its accessories in its Carrying Case

and store in a clean, dry, safe location.

4. CAUTION! All maintenance, service,

and repairs not mentioned in this

manual must only be performed by a

qualied service technician.

Record Serial Number Here:

Note: If product has no serial number, record

month and year of purchase instead.

PLEASE READ THE FOLLOWING CAREFULLY

NEITHER THE MANUFACTURER OR

DISTRIBUTOR MAKES ANY REPRESENTATION

OR WARRANTY OF ANY KIND TO THE BUYER

THAT HE OR SHE IS QUALIFIED TO MAKE

ANY REPAIRS TO THE PRODUCT, OR THAT

HE OR SHE IS QUALIFIED TO REPLACE ANY

PARTS OF THE PRODUCT. IN FACT, THE

MANUFACTURER AND/OR DISTRIBUTOR

EXPRESSLY STATES THAT ALL REPAIRS

AND PARTS REPLACEMENTS SHOULD

BE UNDERTAKEN BY CERTIFIED AND

LICENSED TECHNICIANS, AND NOT BY THE

BUYER. THE BUYER ASSUMES ALL RISK

AND LIABILITY ARISING OUT OF HIS OR

HER REPAIRS TO THE ORIGINAL PRODUCT

OR REPLACEMENT PARTS THERETO, OR

ARISING OUT OF HIS OR HER INSTALLATION

OF REPLACEMENT PARTS THERETO.

Page 4For technical questions, please call 1‑800‑444‑3353.SKU 66534

Parts List and Diagram

Part Description Qty

1 Yoke 1

2Screen Bar Assembly 1

33/16” Adapter 1

41/4” Adapter 1

55/16” Adapter 1

Part Description Qty

63/8” Adapter 1

77/16” Adapter 1

81/2” Adapter 1

95/8” Adapter 1

10 Carrying Case (not shown) 1

LIMITED 90 DAY WARRANTY

Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability

standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship

for the period of 90 days from the date of purchase. This warranty does not apply to damage due directly or

indirectly, to misuse, abuse, negligence or accidents, repairs or alterations outside our facilities, criminal activity,

improper installation, normal wear and tear, or to lack of maintenance. We shall in no event be liable for death,

injuries to persons or property, or for incidental, contingent, special or consequential damages arising from the use

of our product. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the

above limitation of exclusion may not apply to you. THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER

WARRANTIES, EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS.

To take advantage of this warranty, the product or part must be returned to us with transportation

charges prepaid. Proof of purchase date and an explanation of the complaint must accompany the merchandise.

If our inspection veries the defect, we will either repair or replace the product at our election or we may

elect to refund the purchase price if we cannot readily and quickly provide you with a replacement. We will

return repaired products at our expense, but if we determine there is no defect, or that the defect resulted

from causes not within the scope of our warranty, then you must bear the cost of returning the product.

This warranty gives you specic legal rights and you may also have other rights which vary from state to state.

3491 Mission Oaks Blvd. • PO Box 6009 • Camarillo, CA 93011 • (800) 444-3353

1

2

3 4 5 6 7 8 9