Harbor Freight Slim Wall Mount Battery Charger Product Manual

: Harbor-Freight Harbor-Freight-Slim-Wall-Mount-Battery-Charger-Product-Manual-724002 harbor-freight-slim-wall-mount-battery-charger-product-manual-724002 harbor-freight pdf

Open the PDF directly: View PDF .
Page Count: 4

Slim Wall Mount

Battery Charger

Visit our website at: http://www.harborfreight.com

Email our technical support at: productsupport@harborfreight.com

ITEM 62154

Owner’s Manual & Safety Instructions

Save This Manual Keep this manual for the safety warnings and precautions,

assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s

serial number in the back of the manual (or month and year of purchase if product has no number).

Keep this manual and the receipt in a safe and dry place for future reference.

When unpacking, make sure that the product is intact

and undamaged. If any parts are missing or broken,

please call 1-888-866-5797 as soon as possible.

Copyright© 2013 by Harbor Freight Tools®. All rights reserved.

No portion of this manual or any artwork contained herein may be reproduced in

any shape or form without the express written consent of Harbor Freight Tools.

Diagrams within this manual may not be drawn proportionally. Due to continuing

improvements, actual product may differ slightly from the product

described herein. Tools required for assembly and service may not be included.

Read this material before using this

product. Failure to do so can result in

serious injury. SAVE THIS MANUAL.

Page 2 For technical questions, please call 1-888-866-5797. Item 62154

Specifications

Battery Types NiMH only

Input 110-127VAC / 60Hz / 4W

AA Batteries

1800-2200 mAh Charging Time: 10-12 Hours

2300-2400 mAh Charging Time: 12.5 Hours

AAA Batteries

600-800 mAh Charging Time: 8-10 Hours

900-1000 mAh Charging Time: 12.5 Hours

Important Safety Information

To prevent serious injury and property damage:

1. Use as intended only. Use only with NiMH

rechargeable batteries. Do not attempt

to charge any other type of batteries.

2. Place batteries into Charger in

proper polarity and do not install

batteries of different types, charge

levels, or capacities together.

3. For indoor use only. Do not expose

Charger to rain or moisture.

4. Remove from electrical outlet

when not in use.

5. Do not use with extension cord.

6. Do not disassemble or open housing.

7. Inspect before every use; do not use

if parts are loose or damaged.

8. This product is not a toy. Do not allow

children to play with or near this item.

9. Unplug Charger before performing any

cleaning. Use only dry cloth for cleaning;

do not immerse Charger in water.

10. Properly dispose of all used batteries.

11. Use in only a vertical or floor

mounting position.

12. Maintain product labels and nameplates.

These carry important safety information.

If unreadable or missing, contact Harbor

Freight Tools for a replacement.

Page 3For technical questions, please call 1-888-866-5797.Item 62154

Charging Instructions

Read the ENTIRE IMPORTANT SAFETY INFORMATION section

at the beginning of this document including all text under subheadings therein

before set up or use of this product.

1. Insert 2 to 4 AA or AAA rechargeable Ni-MH

batteries into the battery compartments.

NOTE: The batteries should be

inserted in pairs side-by-side and be

of the same type and capacity.

2. Make sure to follow the indicated

polarity specified on the battery slots.

3. Plug the Charger into a household

electrical outlet. The LED will light

up instantly to indicate proper

charging is taking place.

NOTE: The LED’s will NOT switch off

when batteries are fully charged.

4. Remove the batteries after the

specified charge time has passed

(see Specifications on facing page.) Once

batteries are removed, the LED will turn off.

Note: The LED will turn off after

about 12.5 hours of charging.

Remove batteries once LED turns off.

5. Unplug Charger from outlet. Keep stored in

a secure and dry location when not in use.

Record Serial Number Here:

Note: If product has no serial number, record

month and year of purchase instead.

Note: Replacement parts are

not available for this item.

Limited 90 Day Warranty

Harbor Freight Tools Co. makes every effort to assure that its products meet high quality

and durability standards, and warrants to the original purchaser that this product is free from

defects in materials and workmanship for the period of 90 days from the date of purchase.

This warranty does not apply to damage due directly or indirectly, to misuse, abuse, negligence

or accidents, repairs or alterations outside our facilities, criminal activity, improper installation,

normal wear and tear, or to lack of maintenance. We shall in no event be liable for death,

injuries to persons or property, or for incidental, contingent, special or consequential damages

arising from the use of our product. Some states do not allow the exclusion or limitation of

incidental or consequential damages, so the above limitation of exclusion may not apply to you.

THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES, EXPRESS

OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS.

To take advantage of this warranty, the product or part must be returned to us

with transportation charges prepaid. Proof of purchase date and an explanation

of the complaint must accompany the merchandise. If our inspection verifies the

defect, we will either repair or replace the product at our election or we may elect

to refund the purchase price if we cannot readily and quickly provide you with a

replacement. We will return repaired products at our expense, but if we determine

there is no defect, or that the defect resulted from causes not within the scope

of our warranty, then you must bear the cost of returning the product.

This warranty gives you specific legal rights and you may also

have other rights which vary from state to state.

3491 Mission Oaks Blvd. • PO Box 6009 • Camarillo, CA 93011 • 1-888-866-5797