Harbor Freight Solar Mole Chaser Product Manual
Manual for the 94661 Solar Mole and Gopher Chaser 94661 Mole Chaser - Save Big on this Solar Mole Chaser
2015-05-27
: Harbor-Freight Harbor-Freight-Solar-Mole-Chaser-Product-Manual-724138 harbor-freight-solar-mole-chaser-product-manual-724138 harbor-freight pdf
Open the PDF directly: View PDF 
.
Page Count: 8
| Download | |
| Open PDF In Browser | View PDF |
Owner’s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference. REV 14h Visit our website at: http://www.harborfreight.com Email our technical support at: productsupport@harborfreight.com When unpacking, make sure that the product is intact and undamaged. If any parts are missing or broken, please call 1-888-866-5797 as soon as possible. Copyright© 2006 by Harbor Freight Tools®. All rights reserved. No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly from the product described herein. Tools required for assembly and service may not be included. Read this material before using this product. Failure to do so can result in serious injury. SAVE THIS MANUAL. Table of Contents Safetye������������������������������������������2 Specifications...............................4 Setup............................................4 Operationa�������������������������������������6 Maintenancey��������������������������������7 Warranty.......................................8 Safety Setup This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death. Indicates a hazardous situation which, if not avoided, will result in death or serious injury. Indicates a hazardous situation which, if not avoided, could result in death or serious injury. Indicates a hazardous situation which, if not avoided, could result in minor or moderate injury. Addresses practices not related to personal injury. Operation Important Safety Information Personal Safety 1. Dress Properly - Use of rubber gloves and substantial footwear is recommended when working outdoors. Wear protective hair covering to contain long hair. Maintenance 2. Wear ANSI-approved safety goggles during setup. 3. Live moles, gophers and other rodents can be dangerous to approach, and may carry diseases. Page 2 4. Do not Overreach Keep proper footing and balance at all times. 5. Stay Alert - Watch what you are doing. Use common sense. Do not operate appliance when you are tired. 6. People with pacemakers should consult their physician(s) before use. Electromagnetic fields in close proximity to heart pacemaker could cause pacemaker interference or pacemaker failure. For technical questions, please call 1-888-866-5797. Item 94661 Use Precautions 2. For hard earth locations, dig a small hole in the ground before installing the solar mole chaser. 5. Use as intended only. 6. Inspect before every use; do not use if parts are loose or damaged. 7. Maintain product labels and nameplates. These carry important safety information. If unreadable or missing, contact Harbor Freight Tools for a replacement. Maintenance Operation Setup 3. Do not use a hammer or mallet or excessive force to insert the solar mole chaser. Doing so may damage the unit. 4. This product is not a toy. Do not allow children to play with or near this item. Safety 1. Bring unit indoors during extreme weather conditions like hail, ice, snow, or flooding. Although unit is weatherproof, avoid direct exposure to sprinkler systems. Item 94661 For technical questions, please call 1-888-866-5797. Page 3 Specifications Safety Electrical Rating 1.2VAC / 400-1000Hz Battery Rating 1.2V / 600mAh Battery Type NiCd Rechargeable Pulse Interval 30 sec. Range >6000 sq. ft. Setup - Before Use: Setup Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this manual including all text under subheadings therein before set up or use of this product. TO PREVENT INJURY FROM ACCIDENTAL OPERATION: Make sure that the Power Button is in the off‑position and remove the Battery Pack before assembling or making any adjustments to the Mole Chaser. Set Up Operation 1. Make sure that the Power Button is in the off‑position, then unthread the 6 screws on the underside of the head, remove the solar cell cover, and install a AA-sized NiCd rechargeable battery. Reattach the cover and tighten the screws. 2. Press the ON/OFF button beneath the head. The pulse will sound, indicating the product is in proper working condition. Charge the product for at least one full sunny day before its first operation. 3. Carefully insert the Chaser spike into the lawn. Press down firmly until the base of the head is approximately one inch from ground level. Maintenance Page 4 For technical questions, please call 1-888-866-5797. Item 94661 Functions Solar Cell Cover Safety Rechargeable Battery Screw Setup Power Button Maintenance Operation Spike Item 94661 For technical questions, please call 1-888-866-5797. Page 5 Operating Instructions Safety Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this manual including all text under subheadings therein before set up or use of this product. General Operating Instructions Setup 1. The Solar Mole Chaser repels 2. For best results, install 2 units burrowing pests (such as moles, approximately 60 ft. apart in gophers, and other rodents) by emitting the highest risk area. a piercing sonic pulse. This pulse gives 3. To prevent accidents, turn off the pests the illusion of a “danger zone” Mole Chaser and remove its Battery and causes them to evacuate the area after use. Clean, then store the Mole covered by the sound. The Solar Mole Chaser indoors out of children’s reach. Chaser emits the pulse in all directions. Operation Maintenance Page 6 For technical questions, please call 1-888-866-5797. Item 94661 Maintenance and Servicing Safety Procedures not specifically explained in this manual must be performed only by a qualified technician. TO PREVENT INJURY FROM ACCIDENTAL OPERATION: Make sure that the Power Button is in the off‑position and remove its Battery before performing any inspection, maintenance, or cleaning procedures. TO PREVENT INJURY FROM UNIT FAILURE: Do not use damaged equipment. If abnormal noise or vibration occurs, have the problem corrected before further use. • loose hardware, • misalignment or binding of moving parts, • cracked or broken parts, and • any other condition that may affect its safe operation. 4. The built-in battery may need to be replaced once a year. Unthread the 6 screws on the underside of the head, remove the solar cell cover, and replace the old battery with a AA-sized NiCd rechargeable battery. Reattach the cover and tighten the screws. 5. NiCd BATTERY MUST BE RECYCLED OR DISPOSED OF PROPERLY. Do not short, incinerate or open battery. Maintenance 2. AFTER USE, clean external surfaces of the appliance with clean, moist cloth. 3. Clean the solar cell cover periodically with a damp cloth to ensure maximum sun exposure. Operation 1. BEFORE EACH USE, inspect the general condition of the Mole Chaser. Check for: • leaking, swollen, or cracked battery, Setup Cleaning, Maintenance, and Lubrication Item 94661 For technical questions, please call 1-888-866-5797. Page 7 Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase. This warranty does not apply to damage due directly or indirectly, to misuse, abuse, negligence or accidents, repairs or alterations outside our facilities, criminal activity, improper installation, normal wear and tear, or to lack of maintenance. We shall in no event be liable for death, injuries to persons or property, or for incidental, contingent, special or consequential damages arising from the use of our product. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation of exclusion may not apply to you. THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS. To take advantage of this warranty, the product or part must be returned to us with transportation charges prepaid. Proof of purchase date and an explanation of the complaint must accompany the merchandise. If our inspection verifies the defect, we will either repair or replace the product at our election or we may elect to refund the purchase price if we cannot readily and quickly provide you with a replacement. We will return repaired products at our expense, but if we determine there is no defect, or that the defect resulted from causes not within the scope of our warranty, then you must bear the cost of returning the product. This warranty gives you specific legal rights and you may also have other rights which vary from state to state. 3491 Mission Oaks Blvd. • PO Box 6009 • Camarillo, CA 93011 • 1-888-866-5797
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : Yes Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 5.6-c011 79.156289, 2014/03/31-23:39:12 Instance ID : uuid:b5121b63-ebe8-a842-964b-b216b158ea4c Original Document ID : adobe:docid:indd:3d8405b6-7ee1-11df-9488-aa083f618b49 Document ID : xmp.id:ee24c579-dc4c-4366-b611-c479a2419ffc Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:270bc50e-e101-4423-b8b9-06a374298dfb Derived From Document ID : xmp.did:270bc50e-e101-4423-b8b9-06a374298dfb Derived From Original Document ID: adobe:docid:indd:3d8405b6-7ee1-11df-9488-aa083f618b49 Derived From Rendition Class : default History Action : converted History Parameters : from application/x-indesign to application/pdf History Software Agent : Adobe InDesign CC 2014 (Macintosh) History Changed : / History When : 2014:08:20 13:15:58-07:00 Create Date : 2014:08:20 13:15:58-07:00 Modify Date : 2014:08:20 13:16:01-07:00 Metadata Date : 2014:08:20 13:16:01-07:00 Creator Tool : Adobe InDesign CC 2014 (Macintosh) Format : application/pdf Rights : Copyright©2006 by Harbor Freight Tools®. All rights reserved. No portion of this document or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. Subject : 06.10.08.02 Creator : Adobe Web Statement : http://www.harborfreight.com Marked : True Producer : Adobe PDF Library 11.0 Trapped : False Page Count : 8 Author : AdobeEXIF Metadata provided by EXIF.tools