Harbor Freight Solar Mole Chaser Product Manual

Manual for the 94661 Solar Mole and Gopher Chaser 94661 Mole Chaser - Save Big on this Solar Mole Chaser

: Harbor-Freight Harbor-Freight-Solar-Mole-Chaser-Product-Manual-724138 harbor-freight-solar-mole-chaser-product-manual-724138 harbor-freight pdf

Open the PDF directly: View PDF .
Page Count: 8

Visit our website at: http://www.harborfreight.com

Email our technical support at: productsupport@harborfreight.com

REV 14h

Owner’s Manual & Safety Instructions

Save This Manual Keep this manual for the safety warnings and precautions, assembly,

operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the

back of the manual near the assembly diagram (or month and year of purchase if product has no number).

Keep this manual and the receipt in a safe and dry place for future reference.

When unpacking, make sure that the product is intact

and undamaged. If any parts are missing or broken,

please call 1-888-866-5797 as soon as possible.

Copyright© 2006 by Harbor Freight Tools®. All rights reserved.

No portion of this manual or any artwork contained herein may be reproduced in

any shape or form without the express written consent of Harbor Freight Tools.

Diagrams within this manual may not be drawn proportionally. Due to continuing

improvements, actual product may differ slightly from the product described herein.

Tools required for assembly and service may not be included.

Read this material before using this product.

Failure to do so can result in serious injury.

SAVE THIS MANUAL.

Page 2 For technical questions, please call 1-888-866-5797. Item 94661

SAFETY OPERATION MAINTENANCESETUP

Table of Contents

Safety ..........................................2

Specifications ..............................4

Setup ...........................................4

Operation ..................................... 6

Maintenance ................................7

Warranty ......................................8

This is the safety alert symbol. It is used to alert you to

potential personal injury hazards. Obey all safety messages

that follow this symbol to avoid possible injury or death.

Indicates a hazardous situation which, if not avoided,

will result in death or serious injury.

Indicates a hazardous situation which, if not avoided,

could result in death or serious injury.

Indicates a hazardous situation which, if not avoided,

could result in minor or moderate injury.

Addresses practices not related to personal injury.

Important Safety Information

Personal Safety

1. Dress Properly - Use of rubber

gloves and substantial footwear

is recommended when working

outdoors. Wear protective hair

covering to contain long hair.

2. Wear ANSI-approved safety

goggles during setup.

3. Live moles, gophers and other

rodents can be dangerous to

approach, and may carry diseases.

4. Do not Overreach -

Keep proper footing and balance

at all times.

5. Stay Alert - Watch what you are doing.

Use common sense. Do not operate

appliance when you are tired.

6. People with pacemakers should

consult their physician(s) before

use. Electromagnetic fields in close

proximity to heart pacemaker could

cause pacemaker interference

or pacemaker failure.

Page 3For technical questions, please call 1-888-866-5797.Item 94661

SAFETYOPERATIONMAINTENANCE SETUP

Use Precautions

1. Bring unit indoors during extreme

weather conditions like hail, ice,

snow, or flooding. Although unit

is weatherproof, avoid direct

exposure to sprinkler systems.

2. For hard earth locations, dig a

small hole in the ground before

installing the solar mole chaser.

3. Do not use a hammer or mallet

or excessive force to insert

the solar mole chaser. Doing

so may damage the unit.

4. This product is not a toy. Do not allow

children to play with or near this item.

5. Use as intended only.

6. Inspect before every use; do not

use if parts are loose or damaged.

7. Maintain product labels and

nameplates. These carry

important safety information.

If unreadable or missing, contact

Harbor Freight Tools for a replacement.

Page 4 For technical questions, please call 1-888-866-5797. Item 94661

SAFETY OPERATION MAINTENANCESETUP

Specifications

Electrical Rating 1.2VAC / 400-1000Hz

Battery Rating 1.2V / 600mAh

Battery Type NiCd Rechargeable

Pulse Interval 30 sec.

Range >6000 sq. ft.

Setup - Before Use:

Read the ENTIRE IMPORTANT SAFETY INFORMATION section

at the beginning of this manual including all text under

subheadings therein before set up or use of this product.

TO PREVENT INJURY FROM ACCIDENTAL OPERATION:

Make sure that the Power Button is in the off-position and remove the Battery

Pack before assembling or making any adjustments to the Mole Chaser.

Set Up

1. Make sure that the Power Button

is in the off-position, then unthread

the 6 screws on the underside of

the head, remove the solar cell

cover, and install a AA-sized NiCd

rechargeable battery. Reattach

the cover and tighten the screws.

2. Press the ON/OFF button beneath

the head. The pulse will sound,

indicating the product is in proper

working condition. Charge the

product for at least one full sunny

day before its first operation.

3. Carefully insert the Chaser spike into

the lawn. Press down firmly until the

base of the head is approximately

one inch from ground level.

Page 5For technical questions, please call 1-888-866-5797.Item 94661

SAFETYOPERATIONMAINTENANCE SETUP

Functions

Power Button

Rechargeable Battery

Solar Cell Cover

Screw

Spike

Page 6 For technical questions, please call 1-888-866-5797. Item 94661

SAFETY OPERATION MAINTENANCESETUP

Operating Instructions

Read the ENTIRE IMPORTANT SAFETY INFORMATION section

at the beginning of this manual including all text under

subheadings therein before set up or use of this product.

General Operating Instructions

1. The Solar Mole Chaser repels

burrowing pests (such as moles,

gophers, and other rodents) by emitting

a piercing sonic pulse. This pulse gives

pests the illusion of a “danger zone”

and causes them to evacuate the area

covered by the sound. The Solar Mole

Chaser emits the pulse in all directions.

2. For best results, install 2 units

approximately 60 ft. apart in

the highest risk area.

3. To prevent accidents, turn off the

Mole Chaser and remove its Battery

after use. Clean, then store the Mole

Chaser indoors out of children’s reach.

Page 7For technical questions, please call 1-888-866-5797.Item 94661

SAFETYOPERATIONMAINTENANCE SETUP

Maintenance and Servicing

Procedures not specifically explained in this manual

must be performed only by a qualified technician.

TO PREVENT INJURY FROM ACCIDENTAL OPERATION:

Make sure that the Power Button is in the off-position and remove its Battery

before performing any inspection, maintenance, or cleaning procedures.

TO PREVENT INJURY FROM UNIT FAILURE:

Do not use damaged equipment. If abnormal noise or vibration

occurs, have the problem corrected before further use.

Cleaning, Maintenance, and Lubrication

1. BEFORE EACH USE, inspect

the general condition of the

Mole Chaser. Check for:

• leaking, swollen, or cracked battery,

• loose hardware,

• misalignment or binding

of moving parts,

• cracked or broken parts, and

• any other condition that may

affect its safe operation.

2. AFTER USE, clean external surfaces

of the appliance with clean, moist cloth.

3. Clean the solar cell cover

periodically with a damp cloth to

ensure maximum sun exposure.

4. The built-in battery may need to be

replaced once a year. Unthread the

6 screws on the underside of the

head, remove the solar cell cover, and

replace the old battery with a AA-sized

NiCd rechargeable battery. Reattach

the cover and tighten the screws.

5. NiCd BATTERY MUST BE RECYCLED

OR DISPOSED OF PROPERLY.

Do not short, incinerate or open battery.

Limited 90 Day Warranty

Harbor Freight Tools Co. makes every effort to assure that its products meet high quality

and durability standards, and warrants to the original purchaser that this product is free from

defects in materials and workmanship for the period of 90 days from the date of purchase.

This warranty does not apply to damage due directly or indirectly, to misuse, abuse, negligence

or accidents, repairs or alterations outside our facilities, criminal activity, improper installation,

normal wear and tear, or to lack of maintenance. We shall in no event be liable for death,

injuries to persons or property, or for incidental, contingent, special or consequential damages

arising from the use of our product. Some states do not allow the exclusion or limitation of

incidental or consequential damages, so the above limitation of exclusion may not apply to you.

THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR

IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS.

To take advantage of this warranty, the product or part must be returned to us with transportation

charges prepaid. Proof of purchase date and an explanation of the complaint must accompany

the merchandise. If our inspection verifies the defect, we will either repair or replace

the product at our election or we may elect to refund the purchase price if we cannot readily

and quickly provide you with a replacement. We will return repaired products at our expense,

but if we determine there is no defect, or that the defect resulted from causes not within

the scope of our warranty, then you must bear the cost of returning the product.

This warranty gives you specific legal rights and you may also

have other rights which vary from state to state.

3491 Mission Oaks Blvd. • PO Box 6009 • Camarillo, CA 93011 • 1-888-866-5797