Harbor Freight Universal Channel Winch Mount Product Manual

Manual for the 90476 Universal Channel Winch Mount 90476 Universal Channel Winch Mount

2015-05-27

: Harbor-Freight Harbor-Freight-Universal-Channel-Winch-Mount-Product-Manual-723740 harbor-freight-universal-channel-winch-mount-product-manual-723740 harbor-freight pdf

Open the PDF directly: View PDF PDF.
Page Count: 4

DownloadHarbor-Freight Harbor-Freight-Universal-Channel-Winch-Mount-Product-Manual-  Harbor-freight-universal-channel-winch-mount-product-manual
Open PDF In BrowserView PDF
Owner’s Manual & Safety Instructions
Save This Manual Keep this manual for the safety warnings and precautions, assembly,

operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference.

REV 14i

Visit our website at: http://www.harborfreight.com
Email our technical support at: productsupport@harborfreight.com

When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
Copyright© 2003 by Harbor Freight Tools®. All rights reserved.
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.

Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.

Specifications
Winch Compatibility

9,000 & 12,000 lb.
Badlands Winches

Vehicle Compatibility

Various vehicles,
including Toyota®
models FJ-40
and FJ-45

Important Safety Information
Assembly Precautions
1.	 Assemble only according to these
instructions. Improper assembly
can create hazards.

5.	 Keep assembly area clean and well lit.

2.	 Verify Channel is compatible with
the vehicle it is being mounted on.

7.	 Do not mount or use winch when
tired or when under the influence
of alcohol, drugs or medication.

3.	 Prior to installing, read and
understand instructions and safety
precautions outlined in vehicle’s
manufacturer’s service manual.
4.	 Wear ANSI-approved safety goggles
and heavy-duty work gloves
during mounting.

6.	 Keep bystanders out of the area
during mounting and use.

8.	 Weight capacity and other product
capabilities apply to properly and
completely assembled product only.

Use Precautions
1.	 This product is not a toy. Do not allow
children to play with or near this item.
2.	 Use as intended only. This Channel
is designed to be used with 9,000
& 12,000 lb. Badlands Winches.
Do not weld, bend, drill new holes
in, or otherwise modify this item.
Modifications may compromise
the structure of this product,
leading to sudden failure under
load and decreased capacity.
3.	 Inspect before every use; do not use
if parts are loose or damaged.

Page 2

4.	 Do not exceed 12,000 lb. capacity.
Mounting location and hardware
must support winch and load.
Be aware of dynamic loading!
Sudden load movement may
briefly create excess load
causing product failure.
5.	 Maintain product labels and
nameplates. These carry
important safety information.
If unreadable or missing, contact
Harbor Freight Tools for a replacement.

For technical questions, please call 1-888-866-5797.

Item 90476

Mounting Instructions
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the
beginning of this document including all text under subheadings therein
before set up or use of this product.
1.	 Avoid accidental damage to Channel
and/or vehicle to which Channel
will be installed. Prior to installing
the Channel on vehicle, read and
understand instructions and safety
precautions as outlined in vehicle
manufacturer’s service manual.
2.	 CAUTION! Prior to attaching
the Channel to vehicle, make
sure vehicle’s engine is off and
emergency brake is set.

5.	 With assistance, and use of proper
lifting device, position Winch
(not included) over Channel.
6.	 Using the appropriate size ASTM Grade
5 Bolts, Washers, Lock Washers, and
Nuts, attach Winch’s Fairlead (roller or
hawse) onto front of Channel. Then run
the Winch’s Hook through the Fairlead.
Attach to Vehicle’s
Front Frame Rails

3.	 With assistance, position Channel
between front frame rails of vehicle.
4.	 Align mounting holes in Channel with
the factory bolt holes in the frame rails of
Attach Fairlead Here
vehicle. Then, securely attach Channel
7.	
Align
mounting holes in base of the
to vehicle’s frame rails with at least
Winch
with mounting holes in Channel.
4 sets of ASTM Grade 5 Bolts, Washers,
Lock Washers, and Nuts (not included) 8.	 Securely attach Winch to Channel,
the largest diameter that will fit.
using correct hardware.

Record Serial Number Here:

Note: If product has no serial number, record month and year of purchase instead.
Item 90476

For technical questions, please call 1-888-866-5797.

Page 3

Limited 90 Day Warranty
Harbor Freight Tools Co. makes every effort to assure that its products meet high quality
and durability standards, and warrants to the original purchaser that this product is free from
defects in materials and workmanship for the period of 90 days from the date of purchase.
This warranty does not apply to damage due directly or indirectly, to misuse, abuse, negligence
or accidents, repairs or alterations outside our facilities, criminal activity, improper installation,
normal wear and tear, or to lack of maintenance. We shall in no event be liable for death,
injuries to persons or property, or for incidental, contingent, special or consequential damages
arising from the use of our product. Some states do not allow the exclusion or limitation of
incidental or consequential damages, so the above limitation of exclusion may not apply to you.
THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR
IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS.
To take advantage of this warranty, the product or part must be returned to us with transportation
charges prepaid. Proof of purchase date and an explanation of the complaint must accompany
the merchandise. If our inspection verifies the defect, we will either repair or replace
the product at our election or we may elect to refund the purchase price if we cannot readily
and quickly provide you with a replacement. We will return repaired products at our expense,
but if we determine there is no defect, or that the defect resulted from causes not within
the scope of our warranty, then you must bear the cost of returning the product.
This warranty gives you specific legal rights and you may also
have other rights which vary from state to state.

3491 Mission Oaks Blvd. • PO Box 6009 • Camarillo, CA 93011 • 1-888-866-5797



Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : Yes
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 5.6-c011 79.156289, 2014/03/31-23:39:12
Instance ID                     : uuid:98990c10-43d7-4a4d-8197-e7f9b35b1d04
Original Document ID            : adobe:docid:indd:3d8405b6-7ee1-11df-9488-aa083f618b49
Document ID                     : xmp.id:bed4b3f3-267a-4ce0-af9c-c026983957b7
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:0b64d6af-b697-4c30-a3f0-faa55b703ac3
Derived From Document ID        : xmp.did:0b64d6af-b697-4c30-a3f0-faa55b703ac3
Derived From Original Document ID: adobe:docid:indd:3d8405b6-7ee1-11df-9488-aa083f618b49
Derived From Rendition Class    : default
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CC 2014 (Macintosh)
History Changed                 : /
History When                    : 2014:09:22 10:13:24-07:00
Create Date                     : 2014:09:22 10:13:24-07:00
Modify Date                     : 2014:09:22 10:13:26-07:00
Metadata Date                   : 2014:09:22 10:13:26-07:00
Creator Tool                    : Adobe InDesign CC 2014 (Macintosh)
Export Script                   : Export pdf script v3.55
Format                          : application/pdf
Rights                          : Copyright©2003 by Harbor Freight Tools®.  All rights reserved.  No portion of this document or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools.
Creator                         : 
Web Statement                   : http://www.harborfreight.com
Marked                          : True
Producer                        : Adobe PDF Library 11.0
Trapped                         : False
Page Count                      : 4
Author                          : 
EXIF Metadata provided by EXIF.tools

Navigation menu