Harman Becker Automotive Systems 9099 Infotainment System with Headunit (with BT, WLAN, Kleer technology) User Manual BA 222 ECE NA 2013 05b kein Druck 1 en GB

Harman Becker Automotive Systems Infotainment System with Headunit (with BT, WLAN, Kleer technology) BA 222 ECE NA 2013 05b kein Druck 1 en GB

UserManual.wiki >

Harman Becker Automotive Systems >

9099 User Manual >

User Manual II

1. User Manual I
2. User Manual II

User Manual II

Other functions during a call (Y page 436).If the phone number of the caller is transfer-red, it appears in the display.If there is an entry for the caller in the phonebook, you will also see the name.If the phone number is not transferred,Unknown appears in the display.iYou can also accept a call as describedabove when another main function isswitched on in COMAND. Once you haveaccepted the call, the display switches totelephone mode. After the call is finished,you see the display of the previous mainfunction again.The display does not switch to the tele-phone display if you:Rpress the % button beside it and thenRaccept the call using the 6 button onthe multifunction steering wheelRejecting a callXTo select Reject: turn the controller andpress to confirm.orXPress the ~ button on COMAND Onlineor on the multifunction steering wheel.Making a callUsing the number keypadXCall up the telephone basic menu(Y page 432).XEnter the digits using the number keypad.XTo connect the call: press the 6 but-ton on COMAND Online or on the multi-function steering wheel.iAs soon as one of the numbers is touched,the corresponding button is highlighted inthe display. This means you can keep youreyes on the screen at all times.Using the telephone basic menuXCall up the telephone basic menu(Y page 432).XTo select all numbers one after the other:turn and press the controller each time.Dialling a number:XTo select ° from the character list: turnthe controller and press to confirm.orXPress the 6 button on COMAND Onlineor on the multifunction steering wheel.RediallingXCall up the telephone basic menu(Y page 432).XTo select ° from the character list: turnthe controller and press to confirm.orXIf the telephone basic menu is displayed,press the 6 button on COMAND Online.The list of dialled numbers appears. Themost recently dialled number is at the top.XTo select a call: turn the controller.XTo make a call: press the controller.For redialling using the multifunction steeringwheel, see the separate vehicle Owner's Man-ual.Using the call list or COMAND phone bookXOpen a call list and select an entry(Y page 443).orXCall up the COMAND phone book andselect an entry (Y page 440).XTo make a call: press the controller or the6 button.Select and place a call using the multifunctionsteering wheel, see the separate vehicle Own-er's Manual.Telephone 435COMAND OnlineZ

Using speed dial presets to make a callThe speed dial list contains stored entriesfrom the phone book (Y page 445).Option 1:XPress one of the number keys for longerthan two seconds.The telephone basic menu displays theselected entry. This initiates dialling.Option 2:XCall up the telephone basic menu(Y page 432).XTo switch to the menu bar: slide VÆ thecontroller.XTo select Call lists: turn the controllerand press to confirm.A menu appears.XTo select Speed dial preset list: turnthe controller and press to confirm.The speed dial list appears.XTo select the preset: turn the controller andpress.The telephone basic menu displays theselected entry. This initiates dialling.Functions available during a callOverviewTelephone operation with a single call:Person you are calling;Icon for active telephone connection=To end the call?To switch the hands-free microphone off/on (Y page 436)ATo send DTMF tones (not possible with allmobile phones) (Y page 436)BSend call to the rearSwitching the hands-free microphone on/offThis function is also available during an activephone call.XCall up the telephone basic menu(Y page 432).Switching off:XTo switch to the menu bar: slide VÆ thecontroller.XTo select Mike off: turn the controller andpress to confirm.If the microphone is switched off, the dis-play shows the Q icon, and the The microphone is off message appears fora short period.Switching on:XTo select Mike on: turn the controller andpress to confirm.The Q symbol disappears. You will brieflysee the The microphone is on message.Sending DTMF tonesThis function is not supported by all mobilephones.Answering machines or other devices can becontrolled by DTMF tones, e.g. for remotequery functions.XIf you would like to listen to the messageson your answering machine, for example,select the corresponding number.Transmitting individual characters:XOnce a connection has been established tothe answer phone, select the desired char-436 TelephoneCOMAND Online

acters in the character bar: turning andpressing the controller each time.orXPress the corresponding key on theCOMAND Online number keypad.Every character selected will be transmit-ted immediately.Transmitting a phone book entry as a DTMFcharacter string:XTo select Name: turn the controller andpress to confirm.XTo select the required phonebook entry:turn the controller and press to confirm.The entry is sent as a DTMF characterstring.Changing back to the call display:XTo select Back: turn the controller andpress to confirm.iDTMF tones can also be transmitted usingLINGUATRONIC; see the separate operat-ing instructions.Transferring a call to the rear compart-ment and back againYou can transfer a call to the telephone con-nected to the rear unit.XTo switch to the menu bar: slide VÆ thecontroller.XTo select Send call to rear: turn andpress the controller.The rear-compartment telephone (hand-set ) rings. In the bottom menu bar, theCall to front entry is now visible.Retrieving the call:XTo select Call to front: turn and pressthe controller.Calls with several participantsRejecting or accepting a waiting callThe mobile phone network provider must sup-port and activate the call-waiting function.Depending on the mobile phone used, thesystem behaviour differs when accepting acall.If you have a call in progress and receiveanother call, a new window appears in thedisplay. You also hear a tone. You can acceptor reject the call.Rejecting:XTo select Reject: turn the controller andpress to confirm.orXPress the ~ button on COMAND Onlineor on the multifunction steering wheel.Accepting:XTo select Accept: turn the controller andpress to confirm.orXPress the 6 button on COMAND Onlineor on the multifunction steering wheel.The system behaviour after accepting theincoming call depends on your mobile phone.RThe mobile phone supports the call waitingfunction (via Bluetooth®) when:the previously active call is held. You canthen switch back and forth between bothcalls (call waiting) (Y page 438).RThe mobile phone does not support the callwaiting function (via Bluetooth®) when:the previously active call is ended.This is also the case if you accept the wait-ing call using LINGUATRONIC (see the sep-arate operating instructions).Valid in both cases: if you accept the waitingcall using the mobile phone, the active call isput on hold. You then have two calls. The callyou have just accepted is active.The COMAND display changes. If you con-tinue to operate functions on the mobilephone, the COMAND Online display may dif-fer from that of the mobile phone.Telephone 437COMAND OnlineZ

Making a second callIf the following requirements are met, you canmake another call while on the phone withsomeone else:Rthe mobile network must permit this func-tion.Rthe mobile phone must allow you to makea second call via Bluetooth®.Rthe corresponding setting must be activa-ted on the mobile phone.If your mobile phone allows you to make asecond call via Bluetooth®, you can makeanother while on the phone with someoneelse. This action puts the previous call onhold. The function is available.XTo select symbol :: turn the controller andpress to confirm.orXPress the 6 button on COMAND Online.XEnter the phone number:Rmanually (Y page 435)Rusing the phone book (Y page 440)Rusing the call lists (Y page 443)Rusing speed dial (Y page 436)Call waitingYou can switch back and forth between callswith this function. The function is available ifyour mobile phone supports the togglingfunction (via Bluetooth®).You can use the function if you are answeringa second call or making a second call. Bothdiscussions are marked with 1 or 2. The activecall is highlighted.XTo select the telephone symbol (2): turn thecontroller and press to confirm.orXPress the 6 button on COMAND Onlineor on the multifunction steering wheel.The previous call on hold is activated.Ending the active call:XSelect ¢ in the telephone basic menu:turn the controller and press to confirm.orXPress the ~ button on COMAND Onlineor on the multifunction steering wheel.The call on hold is active.Conference callsYou can interconnect calls (active and onhold) on COMAND Online. This permits sev-eral parties to hear one another and speakwith one another.XMake a second call (Y page 438).XTo switch to the menu bar: slide VÆ thecontroller.XTo select Conference: turn and press thecontroller.The new participant is included in the con-ference call.Transferring a callFrom the hands-free system to the mobilephoneIf you want to continue a call in private mode,you will need to perform the necessary stepson the mobile phone (see the mobile phoneoperating instructions).From the mobile phone to the hands-freesystemIf you want to continue a call using COMANDOnline, you have to carry out the necessarysteps on the mobile phone (see the mobilephone operating instructions).438 TelephoneCOMAND Online

$Using the phone bookIntroductionThe phone book displays the names andphone numbers of all address book entriessaved in the COMAND address book. If anaddress book entry does not have a tele-phone number, it does not appear in thephone book.In addition, MB Contact is listed as the firstentry. This allows you to place a call to theMercedes-Benz Service hotline(Y page 459).The phone book of the mobile phone is auto-matically downloaded to COMAND Onlineafter connection.In the telephone book, you can:Rsave phone numbers (Y page 441)Rsearch for entries (Y page 440)Rdelete entries (Y page 441)Rimport contacts (Y page 456)Rdelete contacts (Y page 458)Rreceive vCards (Y page 457)iThe stored phone book and the vCardsremain in COMAND Online even if you useCOMAND Online with another mobilephone. The entries can be viewed withouta mobile phone. For this reason, you shoulddelete any phone book entries before hand-ing over or selling the vehicle.Calling up the phone bookOpening the phone bookXTo call up the telephone basic menu: pressthe % button one or more times.XTo select Name from the telephone basicmenu: turn the controller and press to con-firm.If the phone book contains entries, they willbe displayed in alphabetical order. Thecharacter bar at the bottom of the displayis active.The character bar is used for fast selectionof an entry.Enter the character using the character bar(Y page 369).iYou can also call up the telephone bookwith the multifunction steering wheel, seethe separate vehicle Owner's Manual.Closing the phone bookXTo select & from the character bar: turnthe controller and press to confirm.orXPress the % button.Using the multifunction steering wheelXUse the = or ; button to select theTel menu.XUse 9, : or 9 to call up the phonebook.Symbol overviewSym-bolExplanationÆAddress book entry that has beenentered or changed via COMANDOnlineImported contact that has beensaved in the phone or address book\Address book entry with voice tagThese entries have also beenassigned a voice tag. Voice tags areavailable in vehicles with LINGUA-TRONIC (see the separate operat-ing instructions).Telephone 439COMAND OnlineZ$

Sym-bolExplanationÃContact imported from a mobilephone that supports PBAP orimported from a conveniencephone¯Entry which has been importedfrom the SD memory card or USBdevice®Entry imported via the Bluetooth®interfaceSearching for a phone book entrySearching with the character barYou determine the first letter of the entry youare looking for with the first character youenter.XTo select characters: turn the controllerand press to confirm.The first entry in the list that starts with theletter selected is highlighted. If there aresimilar entries, the next different characteris shown. For example, with entries such asChristel and Christine, the beginningsof the names are similar. In this case, youwill be offered a choice between E and I.XSelect the characters of the entry you aresearching for one by one, pressing and con-firming with the controller each time.When the selection is clear,COMAND Online switches automatically tothe selection list.XTo complete the search: slide VZ the con-troller repeatedly or press and hold until thecharacter bar disappears.The selection list appears.Information about character entry(Y page 369)Searching with the number keypadYou determine the first letter of the entry youare looking for with the first character youenter.XPress the corresponding number keys inrapid succession.More information on entering charactersusing the number keypad (direct entry)(Y page 371).Directly from the listYou can switch to the list at any time duringcharacter entry.XSlide VZ the controller repeatedly or pressand hold until the character bar disappears.orXTo select ¬: turn the controller andpress to confirm.XSelect an entry: turn and press the control-ler.The G symbol indicates that an entry con-tains more than one phone number.XTo select a telephone book entry with theG symbol: turn the controller and press toconfirm.The sub-entries appear. The G symbolchanges to I.XTo select a sub-entry: turn the controllerand press to confirm.440 TelephoneCOMAND Online

Returning to the telephone book with char-acter bar:XTo select & from the list: turn the con-troller and press to confirm.orXPress the % button.Using the multifunction steering wheelXDial a number from the telephone book; seethe separate vehicle Owner's Manual.Displaying the details of an entryXTo select an entry from the selection list:turn the controller.XTo select the list symbol to the right of theentry: slide VY the controller and press toconfirm.XTo select Details: turn and press the con-troller.The detailed display appears.Closing the detailed display:XSlide XVY the controller until the entry ishighlighted once again.orXPress the % button.Deleting an entry from the phone bookIf the entry contains only phone numbers, itis deleted from the phone book and addressbook.If it contains additional data, such as a navi-gable destination, the entry is deleted in thephone book. However, the entry is retained inthe address book.XTo select an entry from the selection list:turn the controller and press to confirm.XTo select the list symbol to the right of theentry: slide VY the controller and press toconfirm.XTo select Delete: turn the controller andpress to confirm.A prompt appears asking whether the entryshould be deleted.XTo select Yes or No: turn or press the con-troller.If you select Yes, the entry is deleted inaccordance with the rules described above.If you select No, the process will be cancel-led.Creating a new entry in the phone bookXSlide ZV the controller repeatedly in thephone book until the selection list appears.XTo select the list symbol to the right of theselection list: slide VY the controller andpress to confirm.XTo select New entry: turn the controllerand press to confirm.XTo select a category for the number, e.g.Home: turn the controller and press to con-firm.XTo select a phone category, e.g. Mobile:turn the controller and press to confirm.iIf you have marked a number as preferred,it will be highlighted in the list.XTo select Preferred: turn the controllerand press to confirm.XTo select Continue: turn the controller andpress to confirm.The input menu with data fields appears.Telephone 441COMAND OnlineZ

XTo select Details: turn the controller andpress to confirm.The detailed display appears.XTo go back to the list: slide XVY the con-troller repeatedly until the list is highligh-ted.Storing a phone numberNew address book entryFor incoming calls from a person who is notin the address book, COMAND Online dis-plays the phone number in the call list. Youcan save this entry.XOpen a call list and select an entry(Y page 443).XTo select the list symbol to the right of theentry: slide VY the controller and press toconfirm.XTo select Save: turn the controller andpress to confirm.XSelect New entry and press W to confirm.XTo select a category for the number, e.g.Home: turn the controller and press to con-firm.XTo select a phone category, e.g. Home: turnthe controller and press to confirm.An input menu with data fields is shown.The data field for the telephone number isfilled in automatically.Number category Display (phonebook and addressbook)Not classified No symbolHome ¸Work ·Phone category Display (phonebook and addressbook)Not classified ;Landline ¬Mobile ÏCar ´:Data field with cursor;Telephone number and symbol for thephone category are automatically entered=Character barAdding information to an address bookentryFor incoming calls from a person who is notin the address book, COMAND Online dis-plays the phone number in the call list. Youcan save this entry.XOpen a call list and select an entry(Y page 443).XTo select the list symbol to the right of theentry: slide VY the controller and press toconfirm.XTo select Save: turn the controller andpress to confirm.iSave is shown in grey if the selected listentry has already been saved.XTo select Add number: turn and press thecontroller.444 TelephoneCOMAND Online

XTo select the list symbol to the right of theentry: slide VY the controller and press toconfirm.A menu appears.XTo select Speed dial preset: turn andpress the controller.A menu appears.XTo select Assign speed dial preset:turn and press the controller.The speed dial list appears. The selectedphone book entry appears at the top. Thenext free speed dial preset is highlighted.XTo select speed dial preset: turn controllerand press to confirm.The phone book entry is saved in the speeddial preset.Option 2XCall up the telephone basic menu(Y page 432)XTo switch to the menu bar: slide VÆ thecontroller.XTo select Call lists: turn and press thecontroller.XTo select Speed dial preset list: turnthe controller and press to confirm.The speed dial list appears.XTo select the list symbol to the right of theentry: slide VY the controller and press toconfirm.XTo select Assign speed dial preset:turn the controller and press to confirm.The speed dial list appears. The selectedphone book entry appears at the top. Thenext free speed dial preset is highlighted.XTo select speed dial preset: turn controllerand press to confirm.The phone book entry is saved in the speeddial preset.Using speed dial presets to make a callThe speed dial list contains stored phonebook entries (Y page 445).Option 1:XPress one of the number keys for longerthan two seconds.The telephone basic menu displays theselected entry. This initiates dialling.Option 2:XCall up the telephone basic menu(Y page 432).XTo switch to the menu bar: slide VÆ thecontroller.XTo select Call lists: turn and press thecontroller.XTo select Speed dial preset list: turnand press the controller.The speed dial list appears.XTo select the preset: turn the controller andpress. Press W to confirm.The telephone basic menu displays theselected entry. This initiates dialling.446 TelephoneCOMAND Online

operating instructions. Only then are youable to select the account you wish to usein COMAND Online.Setting text message receptionXCall up the settings menu for messages.XTo select Text message: turn and pressthe controller.A menu appears.You have the following options:RAll messagesAll messages are downloaded automati-cally.RNew messagesOnly new messages received by the phoneare downloaded automatically.ROffText message reception is deactivated.XTo select the required option: turn andpress the controller.Setting e-mail receptionDeactivating the e-mail function:XCall up the settings menu for messages.XTo select E-mail off: turn and press thecontroller.E-mail reception is deactivated.Selecting and setting the e-mail account:XTo select the e-mail account: turn and pressthe controller.A menu appears.XTo select Automatic download: turn andpress the controller.You have the following options:RAll messagesAll messages are downloaded automati-cally.RNew messagesOnly new messages received by the phoneare downloaded automatically.ROffE-mail reception is deactivated.Entering your own e-mail address:XTo select My e-mail address: turn andpress the controller.The input menu for entering your own e-mail address is displayed. If your addressis in the address book, the input line isalready filled in with the address.Displaying messagesNew messagesNew messages are indicated by an audiblesignal and by 0 in the status bar.XTo call up the telephone basic menu: pressthe % button once or repeatedly.XTo switch to the menu bar: slide V¬ thecontroller.XTo select 0: turn and press the control-ler.You will see a carousel view with the unreadmessages.XTo select the message: turn and press thecontroller.The message text is displayed.XTo close the message text: press the% button.The message disappears from the carouselview.Calling up the messages folder448 TelephoneCOMAND Online

XTo call up the telephone basic menu: pressthe % button once or repeatedly.XTo switch to the menu bar: slide V¬ thecontroller.XTo select 0: turn and press the control-ler.The message menu appears.XTo switch to the menu bar: slide V¬ thecontroller.XTo select Folder: turn and press the con-troller.XTo select the required folder under the titleSMS or E-mail, : turn and press the con-troller.The selected folder is displayed.iThe following folders can be selected:RInboxThe folder contains all the incoming mes-sagesROutboxRDraftsFolders cannot be selected if they areempty.Reading messagesXCall up the messages folder (Y page 448).XTo select the message from the list: turnand press the controller.The message appears.XTo scroll through the display or selectphone numbers in the text: turn theCOMAND controller.The display scrolls up or down line by line,or skips to the next or previous telephonenumber and automatically highlights it.XTo return to the list: press %.Read-aloud function for messagesSettings for the read-aloud function:RLanguage (Y page 379)RSpeed (Y page 376)XTo start the read-aloud function: press thecontroller when the message is displayed.XTo select Read aloud: turn and press thecontroller.COMAND Online reads out the message.XTo cancel the read-aloud function: pressthe 8 button.orXPress the controller, select Cancel read-aloud function and press the controlleragain.Displaying details and phone numbersCOMAND Online can also show a shortenedsender display in full.XCall up the messages folder (Y page 448).XTo select the message: turn the controller.XTo select the list symbol on the right-handside next to the message: slide VY andpress the controller.XTo select Details: turn and press the con-troller.The detailed display appears.XTo close the detailed display: slide XVY thecontroller.XTo return to the telephone basic menu: press the % button.Telephone 449COMAND OnlineZ

Writing messagesNew messageXTo call up the telephone basic menu: pressthe % button once or repeatedly.XTo switch to the menu bar: slide V¬ thecontroller.XTo select 0: turn and press the control-ler.The message menu appears.XTo switch to the menu bar: slide V¬ thecontroller.XTo select New: turn and press the controller.XTo select SMS or E-mail: turn and press thecontroller.The input menu for a new text message ora new e-mail appears.XEntering characters (Y page 369)Once you have entered at least one char-acter into the addressee line, ¬ is activein the first line of the character bar.iCOMAND Online contains templateswhich you can use to compile your mes-sages.Calling up a template:XTo switch to the bottom line of the charac-ter bar: slide V¬ the controller.XTo select the pen icon: turn and press thecontroller.The list of templates appears.XTo select a template: turn and press thecontroller.The text of the template appears in the textarea of the input menu.Sending a message:XTo select ¬ in the first line of the char-acter bar: turn and press the controller.The message is sent. If the message hasbeen sent successfully, the telephonebasic menu appears. If the message fails tobe sent, the Sending message failedmessage is displayed followed by the inputmenu again.Saving the message as a draft:XPress the % button.The Save the message in the drafts folder? prompt appears.XTo select Yes or No: turn and press the con-troller.If you select Yes, the message is saved.If you select No, the message is deleted.iYou can also start sending a messagefrom an entry in the address book(Y page 454).Replying to a messageXDisplay the message (Y page 448).XPress the controller.A menu appears.XTo select Reply: turn and press the con-troller.The input menu appears. The addressee'sdetails are automatically filled in using thedetails in the original message.For further options such as sending a newmessage, see (Y page 448).450 TelephoneCOMAND Online

iWhen replying to an e-mail, you can alsoselect Reply all instead of Reply. In thiscase, the reply is sent not just to the senderbut to all those who received the originalmessage.Forwarding messagesXDisplay the message (Y page 448).XPress the controller.A menu appears.XTo select Forward: turn and press the con-troller.The input menu appears. The subject lineis automatically filled in with the samedetails as those in the original message.For further options such as sending a newmessage, see (Y page 448).Managing messagesCalling a text message (SMS) senderXPress W the controller while the text mes-sage is being displayed.XTo select Call sender: turn and press thecontroller.The telephone makes the call to the sender.Using a telephone number or e-mailaddress in the textYou can use any character sequences whichare highlighted in red in the text.XTo select a usable telephone number or e-mail address when displaying the message:turn and press the controller.XTo select Use: turn and press the controller.XSelect Call.The telephone makes the call.iIt is possible that a highlighted numericalsequence may not contain a telephonenumber.iYou can use the "New entry" or "Add no."functions to save this telephone number orto add it to an existing entry.Storing a sender as a new entry in theaddress bookThis function is not available if the sender’stelephone number or e-mail address isalready stored in the address book.XPress the controller while the message isbeing displayed.XText messages:To select Save number: turn and press thecontroller.XE-mails:To select Save the sender's e-mail address: turn and press the controller.XTo select New entry: turn and press thecontroller.XText messages: save the telephone num-ber (Y page 444)XE-mails: save the e-mail address(Y page 454)Adding the sender to an address bookentryXPress W the controller while the messageis being displayed.XText messages:To select Save number: turn and press thecontroller.XE-mails:To select Save the sender's e-mail address: turn and press the controller.XTo select Add: turn and press the controller.XProceed from the step "Selecting a cate-gory" (Y page 442).Deleting messagesXCall up the message folder (Y page 448).XTo select the message: turn and press thecontroller.XTo select the list symbol on the right-handside next to the message: slide VY andpress the controller.Telephone 451COMAND OnlineZ

XTo select Delete: turn and press the con-troller.A deletion prompt appears.XTo select Yes or No: turn and press the con-troller.If you select Yes, the message is deleted.If you select No, the process will be cancel-led.iThis delete function is not supported byall mobile phones. The Delete failedmessage appears.Using the address bookIntroductionThe address book organises and storesentries that are entered from different sour-ces (mobile phone, memory card, USB device,COMAND telephone book, navigation sys-tem).You can use these entries to make telephonecalls and to navigate.iNumber of contacts in the address book: the address book can store a total of4,000 contacts.1,500 entries each are reserved in theaddress book for:Rcontacts from the mobile phoneRcontacts that you create inCOMAND Online or import from othersourcesThe remaining 1,000 entries are assignedby COMAND Online as necessary.iDisplay of mobile phone contacts: con-tacts downloaded from the mobile phoneremain in the address book even if you dis-connect the mobile phonefrom COMAND Online. Contacts that havepreviously been available can be displayedas soon as the mobile phone is reconnec-ted. COMAND Online downloads the con-tacts again so that any new contacts thathave been added to the mobile phone canbe displayed.As soon as you connect a new mobilephone to COMAND Online all the contactsfrom the previous mobile phone arereplaced by those from the new phone'saddress book.Address book entries remain stored if themobile phone is disconnected. For this rea-son, delete your personal data using thereset function before selling your vehicle,for example (Y page 380).Calling up the address bookUsing the telephone button:XPress the % button one or more times.From the telephone basic menu:XTo switch to main function bar: slide VZthe controller.XTo select Tel: turn the controller and pressto confirm.XTo select Address book from the carousel:turn the controller and press to confirm.XTo browse in the address book: turn thecontroller.XTo jump to a specific letter: press the cor-responding button on the keypad one ormore times.XTo close the address book: press the% button.452 TelephoneCOMAND Online

Searching for an address book entry:¥ Address book entry;L Complete address data from the nav-igation system=Character bar?d Phone book entry on the mobile phoneAEntry with voice tagThe symbols to the left of the list entries canbe found in the symbol overview(Y page 439).XCall up the address book (Y page 452).XTo switch to the menu bar: slide V¬ thecontroller.XTo select Search: turn the controller andpress to confirm.The address list with character barappears.XFind an entry (Y page 440).Creating a new entry in the addressbookYou can enter address data directly into theaddress book. If you store telephone num-bers in the COMAND phone book, these arealso saved in the address book. If you store anavigation destination, COMAND Online cre-ates an address book entry which includesthe complete navigable address data.XCall up the address book (Y page 452).XTo switch to the menu bar: slide VÆ thecontroller.XTo select New: turn the controller and pressto confirm.An input menu for surname, first name andtelephone number appears.Input menu with data fields:Selected data field with cursor;Character barXEnter characters (Y page 369)XSave the entry (Y page 370)Deleting an address book entryXSearch for the address book entry(Y page 453).XTo select the list symbol to the right of theentry: slide VY the controller and press toconfirm.XTo select Delete: turn and press the con-troller.A query appears.XTo select Yes or No: turn the controller andpress to confirm.If you select Yes, the entry will be deleted.If you select No, the process will be cancel-led.Telephone 453COMAND OnlineZ

$Displaying details for an address bookentrySelecting an entryiAn address book entry can contain thefollowing information:RnameRfirst nameRcompanyRup to five telephone numbersRtwo email addressesRInternet addressRtwo addressesRtwo navigation addresses (transferredfrom Navigation)Rgeo-coordinatesDetailed display of address book:To go back to the previous menu;\ Business details;6 Home details=List symbol (to call up options)XCall up the address book (Y page 452).XSelect an entry: turn and press the control-ler.The address book entry with all data fieldsappears.Adding information to an address bookentryXTo select the required data field (e.g. e-mail): turn the controller.XTo select the "Add..." bar (example: Add e-mail address): turn the controller andpress to confirm.Depending on the type of data field, thecorresponding input menu appears.XEnter characters (Y page 369).XSave the entry (Y page 370).Starting route guidance to an addressXTo select the address data field: turn thecontroller and press to confirm.The route to the destination address is cal-culated and route guidance starts.Calling a telephone numberXTo select the telephone number data field:turn the controller and press to confirm.This initiates dialling and you can thenmake your call (Y page 436).Sending text messagesXTo select a telephone number: turn the con-troller.XTo select the list symbol to the right of thedata field: slide VY the controller andpress to confirm.XTo select Send a text message: turn thecontroller and press to confirm.The text message input menu appears(Y page 450).Sending e-mailXTo select the e-mail address: turn the con-troller.XTo select the list symbol to the right of thedata field: slide VY the controller andpress to confirm.XTo select Send e-mail: turn the controllerand press to confirm.The e-mail input menu appears(Y page 450).454 TelephoneCOMAND Online$