Harman Becker Automotive Systems BE2800 Automotive Infotainment Unit User Manual 1130540

Harman Becker Automotive Systems, Inc. Automotive Infotainment Unit 1130540

User Manual

Download: Harman Becker Automotive Systems BE2800 Automotive Infotainment Unit User Manual 1130540
Mirror Download [FCC.gov]Harman Becker Automotive Systems BE2800 Automotive Infotainment Unit User Manual 1130540
Document ID1790052
Application IDuEz4YMIH9gPqvo8eLEyFpg==
Document DescriptionUser Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize193.56kB (2419454 bits)
Date Submitted2012-09-13 00:00:00
Date Available2012-10-28 00:00:00
Creation Date2012-07-19 20:58:36
Producing SoftwareSDL
Document Lastmod2012-08-10 13:34:58
Document Title1130540
Document CreatorXPP Professional Publisher
Document Author: Tweddle Group USA

Uconnect™ ACCESS USER’S MANUAL
CONTENTS
m Identifying Your Radio . . . . . . . . . . . . . . . . . . . . .3
▫ Uconnect™ 3.0 System. . . . . . . . . . . . . . . . . . .15
m Safety Guidelines. . . . . . . . . . . . . . . . . . . . . . . . .6
▫ Radio Mode . . . . . . . . . . . . . . . . . . . . . . . . . .17
m Uconnect™ Access Overview . . . . . . . . . . . . . . .10
▫ Media Mode . . . . . . . . . . . . . . . . . . . . . . . . . .19
▫ How to Register with Uconnect™ Access: . . . . .10 m Uconnect™ 5.0. . . . . . . . . . . . . . . . . . . . . . . . . .23
▫ Uconnect™ Access In-Vehicle Assistance
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
▫ Uconnect™ Access In-Vehicle Connectivity
Services . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
▫ Uconnect™ Access Additional Information . . . .13
m Uconnect™ 3.0. . . . . . . . . . . . . . . . . . . . . . . . . .15
▫ Uconnect™ 5.0 System. . . . . . . . . . . . . . . . . . .23
▫ Radio Mode . . . . . . . . . . . . . . . . . . . . . . . . . .24
▫ Media Mode . . . . . . . . . . . . . . . . . . . . . . . . . .28
▫ Uconnect™ Phone . . . . . . . . . . . . . . . . . . . . . .32
▫ Uconnect™ Voice Command . . . . . . . . . . . . . .35
▫ Settings Main Menu . . . . . . . . . . . . . . . . . . . .39
2
Uconnect™ ACCESS USER’S MANUAL
▫ More Main Menu . . . . . . . . . . . . . . . . . . . . . .40 m Uconnect™ 8.4AN . . . . . . . . . . . . . . . . . . . . . .158
m Uconnect™ 8.4A . . . . . . . . . . . . . . . . . . . . . . . .41
▫ Uconnect™ 8.4AN System . . . . . . . . . . . . . . .158
▫ Uconnect™ 8.4A System . . . . . . . . . . . . . . . . .41
▫ Radio Mode . . . . . . . . . . . . . . . . . . . . . . . . .159
▫ Radio Mode . . . . . . . . . . . . . . . . . . . . . . . . . .42
▫ Media Mode . . . . . . . . . . . . . . . . . . . . . . . . .171
▫ Media Mode . . . . . . . . . . . . . . . . . . . . . . . . . .54
▫ Uconnect™ Phone . . . . . . . . . . . . . . . . . . . . .179
▫ Uconnect™ Phone . . . . . . . . . . . . . . . . . . . . . .62
▫ Uconnect™ Voice Command. . . . . . . . . . . . . .206
▫ Uconnect™ Voice Command . . . . . . . . . . . . . .93
▫ Navigation . . . . . . . . . . . . . . . . . . . . . . . . . .219
▫ Navigation . . . . . . . . . . . . . . . . . . . . . . . . . .106
▫ Security Features . . . . . . . . . . . . . . . . . . . . . .264
▫ Security Features . . . . . . . . . . . . . . . . . . . . . .264
▫ Remote Service Features . . . . . . . . . . . . . . . . .270
▫ Remote Service Features . . . . . . . . . . . . . . . . .270
Uconnect™ ACCESS USER’S MANUAL
Identifying Your Radio
• SiriusXM™ Optional
Uconnect™ 3.0
Uconnect™ 5.0
Key Features
Key Features
• 3” Screen
• 5” Touch-Screen
• Two hard-keys on either side of the display
• Three hard-keys on either side of the display
4
Uconnect™ ACCESS USER’S MANUAL
• Hands-free/Bluetootht
• 8.4” Touch-Screen
• SiriusXM™ Optional
• Navigation-Ready, see your dealer for details
Uconnect™ 8.4A
• Hands-free/Bluetootht
• Touchscreen Climate Controls
• SiriusXM™
• Embedded Connectivity (US Market Only)
Uconnect™ 8.4AN
Key Features
• 8.4” Touch-Screen
• Navigation Standard
• Hands-free/Bluetootht
Key Features
• Touchscreen Climate Controls
NOTE: The 8.4A and 8.4AN appearance is the same, but
• HD Radio
the listed features provide the differences.
Uconnect™ ACCESS USER’S MANUAL
• SiriusXM™
• SiriusXM™ Traffic
• Embedded Connectivity (US Market Only)
6
Uconnect™ ACCESS USER’S MANUAL
Safety Guidelines
WARNING!
ALWAYS drive safely with your hands on the wheel.
You have full responsibility and assume all risks
related to the use of the Uconnect™ features and
applications in this vehicle. Only use Uconnect™
when it is safe to do so. Failure to do so may result in
an accident involving serious injury or death.
• Stop use immediately if a problem occurs. Failure to
do so may cause injury or damage to the product.
Return it to your authorized dealer to repair.
• Make certain that the volume level of the system is set
to a level that still allows you to hear outside traffic
and emergency vehicles.
Safe Usage of the Uconnect™ Access System
• Read all instructions in this manual carefully before
using your system to ensure proper usage!
Ensure that all persons read this manual carefully before
using the radio system. It contains instructions on how to • Your system is a sophisticated electronic device. Do
not let young children use your system.
use the system in a safe and effective manner.
Please read and follow these safety precautions. Failure • Permanent hearing loss may occur if you play your
music or the system at loud volumes. Exercise caution
to do so may result in injury or property damage.
when setting the volume on your system.
• Glance at the screen only when necessary and safe to
do so. If prolonged viewing of the screen is necessary,
park in a safe location and set the parking brake.
Uconnect™ ACCESS USER’S MANUAL
• Driving is a complex activity that requires your full • Do not spray any liquid or caustic chemicals directly
on the screen! Use a clean and dry micro fiber lens
attention. If you’re engaged in driving or any activity
cleaning cloth in order to clean the touch screen.
that requires your full attention, we recommend that
you not use your system.
• If necessary, use a lint-free cloth dampened with a
cleaning solution, such as isopropyl alcohol, or an
NOTE: Many features of this system are speed depenisopropyl alcohol and water solution ratio of 50:50. Be
dent. For your own safety, it is not possible to use some
sure to follow the solvent manufacturer’s precautions
of the touch screen features while the vehicle is in
and directions.
motion.
• Keep drinks, rain, and other sources of moisture away Disc Drive
from your system. Besides damage to your system,
• Do not insert any damaged, warped, scratched or dirty
moisture can cause electric shocks as with any elecDiscs into the Disc player.
tronic device.
• Discs that have been modified with an adhesive label
Touch Screen
should not be used in the Disc player.
• Do not touch the screen with any hard or sharp objects
• Do not insert more than one Disc at a time into the
(pen, USB stick, jewelry, etc.) which could scratch the
drive slot.
touch screen surface!
FCC Declaration
8
Uconnect™ ACCESS USER’S MANUAL
NOTE: This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with
Le présent appareil est conforme aux CNR d’Industrie
the instructions, may cause harmful interference to radio
Canada applicables aux appareils radio exempts de licommunications. However, there is no guarantee that
cence. L’exploitation est autorisée aux deux conditions
interference will not occur in a particular installation.
suivantes: (1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout If this equipment does cause harmful interference to
brouillage radioélectrique subi, même si le brouillage est radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged
susceptible d’en compromettre le fonctionnement.
to try to correct the interference by one or more of the
following measures: - Increase the separation between
the equipment and receiver. - Consult the dealer or an
experienced radio technician for help.
This device complies with Part 15 of the FCC Rules and
with Industry Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions: (1)
this device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may cause undesired operation.
Safety Information
Uconnect™ ACCESS USER’S MANUAL
Exposure to Radio Frequency Radiation
The radiated output power of the this internal wireless
radio is far below the FCC radio frequency exposure
limits. Nevertheless, the wireless radio shall be used in
such a manner that the radio is 20 cm or further from the
human body.
The internal wireless radio operates within guidelines
found in radio frequency safety standards and recommendations, which reflect the consensus of the scientific
community.
The radio manufacturer believes the internal wireless
radio is safe for use by consumers. The level of energy
emitted is far less than the electromagnetic energy emitted by wireless devices such as mobile phones. However,
the use of wireless radios may be restricted in some
situations or environments, such as aboard airplanes. If
you are unsure of restrictions, you are encouraged to ask
for authorization before turning on the wireless radio.
10 Uconnect™ ACCESS USER’S MANUAL
Uconnect™ Access Overview
How to Register with Uconnect™ Access:
Uconnect™ Access (Available on Uconnect™ 8.4A and 1. With the vehicle parked and the radio powered on,
Uconnect™ 8.4AN)
select the “Apps” soft-key located near the bottom of
the radio touch screen.
With Uconnect™ Access, owners have emergency and
remote vehicle features available. These features include 2. Select the “Uconnect Registration” App soft-key from
9-1-1 Call, Roadside Assistance, Uconnect™ Care and
the Apps list.
Vehicle Care. With the Uconnect™ Access, your vehicle is
3. The Uconnect™ Registration App will open and proalso capable of remote vehicle features like Remote Start,
vide step-by-step instructions on how to enter your
Remote Door Lock/Unlock, and Remote Horn and
email address to begin the registration process.
Lights. Once registered, Uconnect™ Access customers
can purchase packages and apps at any time. For addi- 4. You will receive a secured registration email from
tional information, contact Uconnect™ Customer Care at
Uconnect™ Access containing a link for completing
855-792-4241, or visit Owner Connect (www.Mopyour Uconnect™ Access Registration on-line. For searOwnerConnect.com).
curity reasons, this email link will be valid for 24
hours.
5. Follow the link to complete the final step of registration and to begin using Uconnect™ Access
Uconnect™ ACCESS USER’S MANUAL
11
For additional registration assistance while in the vehicle,
push the ASSIST button to contact Uconnect™ Customer
Care.
Uconnect™ Access In-Vehicle Assistance
Features
With Uconnect™ Access, your vehicle has an on-board
assistance feature located on the rear view mirror designed to enhance your driving experience if you should
ever need assistance or support.
Assist Call button
ASSIST Call
The rear view mirror contains an ASSIST push button
which automatically connects the vehicle occupants to
one of several predefined destinations for immediate
support:
12 Uconnect™ ACCESS USER’S MANUAL
1. Roadside Assistance Call – If you get a flat tire, or need
a tow, you’ll be connected to someone who can help
anytime. Roadside Assistance will know what vehicle
you’re driving and its location. Additional fees may
apply for roadside Assistance.
2. Uconnect™ Customer Care – In-vehicle support for
Uconnect™ Access System, Apps and Features.
3. Vehicle Customer Care – Total support for your
Chrysler Group vehicle.
9–1–1 Call button
9–1–1 Call
Places a direct call to local 9–1–1 emergency authority.
Uconnect™ ACCESS USER’S MANUAL
Uconnect™ Access In-Vehicle Connectivity
Services
13
To use the Uconnect™ Features and Services, you must
first register your vehicle with Uconnect™ Access. Please
refer to the “Register with Uconnect Access” section of
this User’s Manual to start registration. Once registered,
you can personalize your vehicle Uconnect™ System as
desired.
Uconnect™ Access brings the power of the internet into
your vehicle with exciting features, remote capabilities,
theft alarm notification, and stolen vehicle assistance
applications through on-board connectivity service. Once
registered with Uconnect™ Access, you can customize How to Purchase or Cancel an App
the capabilities of your vehicle system using your
From your Uconnect™ Access Account, you can easily
Uconnect™ Access account from the vehicle, the web, or
purchase or cancel Applications or subscriptions. Simply
your Smartphone.
log-in to your Uconnect™ Access Account and visit your
Please refer to your Uconnect™ Access account for Uconnect™ Store.
information on available subscriptions, applications and
Correcting a Download Error - How to Reset the
packages for your vehicle. For additional information,
Uconnect™ Access System
contact Uconnect™ Customer Care at 855-792-4241, or
visit Owner Connect (www.MoparOwnerConnect.com). You can easily correct any App related issues by resetting
the App. Simply log-in to your Uconnect™ Access AcUconnect™ Access Additional Information
count and visit the Uconnect™ Store, click on My Apps,
click on Settings, and then choose Reset/Reinstall. In
My Uconnect™ Account
minutes your App will be reinstalled and ready to go.
14 Uconnect™ ACCESS USER’S MANUAL
Selling my Vehicle - How to Completely Remove My
Uconnect™ Account
To completely remove your Uconnect™ Account, simply
log-in to your Uconnect™ Account and visit the
Uconnect™ Store, click on My Apps, click on Settings,
and then choose Remove Uconnect™ Account. In minutes your entire Uconnect™ Account and information
will be removed from your vehicle.
For further assistance call 855-792-4241, or go to the
Mopar Owner Connect site at (www.MoparOwnerConnect.com).
Uconnect™ ACCESS USER’S MANUAL
Uconnect™ 3.0
Uconnect™ 3.0 System
15
Press the RADIO hard-key to enter the Radio Mode. The
different tuner modes; AM, FM and SXM can be selected
by touching the corresponding soft-keys in the Radio
Mode.
2. INFO
Press the INFO button for an RDS station (one with call
letters displayed). The radio will return a Radio Text
message broadcast from an FM station (FM mode only).
3. A-B-C
Press the A-B-C hard-key to select the A, B or C preset
list.
4. ENTER/BROWSE & TUNE/SCROLL
1. RADIO
Press the ENTER/BROWSE button to accept a highlighted selection on the screen. Rotate the TUNE/
SCROLL rotary knob to scroll through a list or tune a
radio station.
16 Uconnect™ ACCESS USER’S MANUAL
5. SEEK UP
Press the Seek Down soft-key to tune the radio to the
previous listenable station or channel.
Press the Seek Up soft-key to tune the radio to the next
11. ON/VOLUME
listenable station or channel.
Push the ON/VOLUME control knob to turn on the
radio. Push the ON/VOLUME control knob a second
Press the BACK button to return to a previous menu or
time to turn off the radio.
screen.
The electronic volume control turns continuously (360
7. MENU
degrees) in either direction without stopping. Turning the
Press the MENU button allows to scroll between the ON/VOLUME control knob to the right increases the
volume and to the left decreases it.
setting sub-menus.
6. BACK
8. PLAY/PAUSE/MUTE
12. PRESETS 1–6
Press to Play, Pause or Mute the music.
These buttons tune the radio to the stations that you
commit to pushbutton memory AM (A, B, C), FM (A, B,
C) and Satellite — 18 AM, 18 FM and 18 SAT stations.
9. AUDIO
Press the AUDIO button to adjust the Bass, Mid Range, 13. MEDIA
Treble, Balance or Fade.
10. SEEK DOWN
Uconnect™ ACCESS USER’S MANUAL
17
Pressing the MEDIA button will allow you to switch from • When the audio system is turned on, the sound will be
set at the same volume level as last played.
AM/FM modes to Media mode (CD, USB/iPOD, AUX,
Bluetooth).
Enter/Browse & Tune/Scroll Control
Radio Mode
• Turn the rotary TUNE/SCROLL control knob clockThe radio is equipped with the following modes:
• FM
wise to increase or counterclockwise to decrease the
radio station frequency. Push the ENTER/BROWSE
button to choose a selection.
• AM
Seek Functions
• SXM Sirius XM™ Satellite Radio (if equipped)
Seek Up
Touch the RADIO button, to enter the Radio Mode. The • Touch and release the Seek Up button to tune the radio
different tuner modes; AM, FM, and SXM, can then, be
to the next listenable station or channel.
selected by touching the corresponding soft-keys in the
• During a Seek Up function, if the radio reaches the
Radio mode.
starting station after passing through the entire band
ON/OFF & Volume Control
two times, the radio will stop at the station where it
began.
• Push the ON/OFF Volume control knob to turn on the
radio. Push the ON/OFF Volume control knob a Seek Down
second time to turn off the radio.
18 Uconnect™ ACCESS USER’S MANUAL
• Touch and release the Seek Down button to tune the SiriusXM™ Satellite Radio uses direct satellite-to-receiver
broadcasting technology to provide clear digital sound,
radio to the next listenable station or channel.
coast to coast. The subscription service provider is Siri• During a Seek Down function, if the radio reaches the
usXM™ Satellite Radio. This service offers over 130
starting station after passing through the entire band
channels of music, sports, news, entertainment, and
two times, the radio will stop at the station where it
programming for children, directly from its satellites and
began.
broadcasting studios. A one-year SiriusXM™ Satellite
Setting Presets
Radio subscription is included.
The Presets are available for all Radio Modes, and are SiriusXM™ and all related marks and logos are tradeactivated by touching any of the six Preset buttons.
marks of SiriusXM™ Radio Inc. and its subsidiaries.
When you are receiving a station that you wish to SiriusXM™ Satellite Radio requires a subscription, sold
commit into memory, press and hold the desired num- separately after trial subscription included with vehicle
bered button for more that 2 seconds or until you hear a purchase. Prices and programming are provided by
SiriusXM™ and are subject to change. Subscriptions
confirmation beep.
governed by Terms & Conditions available at sirius.com/
The Radio stores up to 18 presets in each of the Radio serviceterms. SiriusXM™ Radio U.S. service only availmodes. Press the A-B-C hard-key to select the A, B or C able to those at least 18 years of age in the 48 contiguous
preset list.
United States, D.C., and PR. Service available in Canada;
see www.siriuscanada.ca.
SiriusXM™ Satellite Radio Mode
Uconnect™ ACCESS USER’S MANUAL
19
This functionality is only available for radios equipped Clock Setting
with a Satellite receiver. In order to receive satellite radio,
1. Press the Menu button at the bottom of the radio, next
the vehicle needs to be outside with a clear view to the
select the Time Format setting and then select Set
sky.
Time.
If the screen shows Acquiring Signal, you might have to
change the vehicle’s position in order to receive a signal. 2. Adjust the hours or minutes by turning the Tune/
Scroll knob, then pressing the Enter/Browse button to
In most cases, the satellite radio does not receive a signal
move to the next entry. You can also select 12hr or 24hr
in underground parking garages or tunnels.
format by turning the Tune/Scroll knob, then pressing
Audio
the Enter/Browse button on the desired selection.
1. Press the AUDIO button at the button of the radio.
3. Once the time is set press the “Back” button to exit the
time screen.
2. The Audio Menu shows the following options for you
to customize your audio settings.
Media Mode
Mid, Bass, Fade, Balance
Media Mode is entered by touching the Media button
• Select the desired setting to adjust, then touch the located on the side of the display. Once in Media Mode,
Enter/Browse button. Turn the Tune/Scroll knob to select your media Source by rotating the Scroll rotary
adjust the setting + or - 9. Press the back button when knob and pushing the Enter button.
done.
Common Media Functions
20 Uconnect™ ACCESS USER’S MANUAL
Seek Up/Down
Info
Touch and release the right arrow soft-key for the next
selection. Touch and release the left arrow soft-key to
return to the beginning of the current selection, or return
to the beginning of the previous selection if the Disc is
within the first second of the current selection.
Touch the Info soft-key to display the current track
information. Touch the “X” soft-key to cancel this feature.
Source
If equipped, your vehicle may have a remote Disc player
located in the lower center console storage bin.
Shuffle
Touch the shuffle soft-key to play the selections on the
USB/iPodt device in random order to provide an interFast Seek Up: Touch and hold the right arrow soft-key
esting change of pace. Touch the soft-key a second time to
and the desired mode will begin to fast forward through
turn this feature off.
the current track until the soft-key is released.
Audio
Fast Seek Down: Touch and hold the left arrow soft-key
and the desired mode will begin to rewind through the Refer to Radio Mode for adjusting the audio settings.
current track until the soft-key is released.
Disc Mode
Touch the Source soft-key to select the desired audio
source, Disc, AUX or USB/iPodt. This screen will time
out after a few seconds and return to the main radio
screen if no selection is made.
Disc Mode is entered by either inserting a Disc or by
touching the Media button located on the side of the
display. Once in Media Mode, select Disc mode.
Uconnect™ ACCESS USER’S MANUAL
21
Inserting Compact Disc
Eject Button – Ejecting a Disc
Gently insert one Disc into the Disc player with the Disc
label following the illustration indicated on the player.
The Disc will automatically be pulled into the Disc player
and the Disc icon will illuminate on the radio display. If
a Disc does not go into the slot more than 1.0 in (2.5 cm),
a disc may already be loaded and must be ejected before
a new Disc can be loaded.
Press the EJECT button to eject the Disc. If you have
ejected a Disc and have not removed it within 10 seconds,
it will be reloaded. If the Disc is not removed, the radio
will reinsert the Disc but will not play it.
If you insert a Disc with the ignition ON and the radio
ON, the unit will switch to CD/Disc mode and begin to
play when you insert the Disc. The display will show the
track number, and index time in minutes and seconds.
Play will begin at the start of track 1.
USB/iPodt Mode is entered by either inserting a USB
Jump Drive or iPodt cable into the USB port or by
touching the Media button located left of the display.
Once in Media Mode, touch the source soft-key and select
USB/iPodt.
Browse
Inserting USB/iPodt Device
A Disc can be ejected with the radio and ignition OFF.
USB/iPodt Mode
Touch the browse soft-key to scroll through and select a Gently insert the USB/iPodt device into the USB Port. If
desired track on the Disc. Touch the exit soft-key if you you insert a USB/iPodt device with the ignition ON and
the radio ON, the unit will switch to USB/iPodt mode
wish to cancel the browse function.
and begin to play when you insert the device. The
22 Uconnect™ ACCESS USER’S MANUAL
display will show the track number, and index time in Gently insert the Auxiliary device cable into the AUX
minutes and seconds. Play will begin at the start of track Port. If you insert a Auxiliary device with the ignition ON
and the radio ON, the unit will switch to AUX mode and
1.
begin to play when you insert the device cable.
Browse
Controlling the Auxiliary Device
Touch the Browse soft-key to select Artist, Albums,
Genres, Songs, Playlists or Folders from the USB/iPodt The control of the auxiliary device (e.g., selecting playdevice. Once the desired selection is made you can chose lists, play, fast forward, etc.) cannot be provided by the
from the available media by touching the soft-key. Touch radio; use the device controls instead. Adjust the volume
the exit soft-key if you wish to cancel the browse func- with the ON/OFF VOLUME rotary knob, or with the
volume of the attached device.
tion.
AUX Mode
AUX Mode is entered by inserting a AUX device using a
cable with a 3.5 mm audio jack into the AUX port or by
touching the Media button located left of the display.
Once in Media Mode, touch the source soft-key and select
AUX.
Inserting Auxiliary Device
NOTE: The vehicle radio unit is acting as the amplifier
for audio output from the Auxiliary device. Therefore if
the volume control on the Auxiliary device is set too low,
there will be insufficient audio signal for the radio unit to
play the music on the device.
Uconnect™ ACCESS USER’S MANUAL
Uconnect™ 5.0
Uconnect™ 5.0 System
23
Press the RADIO hard-key to enter the Radio Mode. The
different tuner modes; AM, FM and SXM can be selected
by touching the corresponding soft-keys in the Radio
Mode.
2. COMPASS
Press the COMPASS hard-key to display the current
direction of the vehicle.
3. SETTINGS
Press the SETTINGS hard-key to access the Settings list.
Clock, Display, Audio, Bluetooth and Sirius Settings are
described in this manual.
4. MORE
1. RADIO
Press the MORE hard-key to access additional options.
5. ENTER/BROWSE & TUNE/SCROLL
24 Uconnect™ ACCESS USER’S MANUAL
Press the ENTER/BROWSE button to accept a high- 10. MEDIA
lighted selection on the screen. Rotate the TUNE/
Pressing the MEDIA button will allow you to switch to
SCROLL rotary knob to scroll through a list or tune a
Media mode (CD, USB/iPOD, AUX, Bluetooth).
radio station.
Radio Mode
6. BACK
The radio is equipped with the following modes:
Press the BACK button to return to a previous menu or
screen.
• FM
7. SCREEN OFF
• AM
Press the SCREEN OFF hard-key to turn the touch-screen • SXM Sirius XM™ Satellite Radio (if equipped)
OFF. To turn the screen back ON, just touch the screen.
Touch the RADIO hard-key, to enter the Radio Mode. The
8. VOLUME & MUTE
different tuner modes; AM, FM, and SXM, can then, be
Rotate the rotary knob to adjust the Volume. Press the selected by touching the corresponding soft-keys in the
Radio mode.
Mute button to mute the system.
9. PHONE
Press the Phone button to access the Uconnect™ Phone
feature.
Volume & Mute
Uconnect™ ACCESS USER’S MANUAL
25
• Rotate the rotary knob to adjust the Volume. When the • During a Seek Up function, if the radio reaches the
starting station after passing through the entire band
audio system is turned on, the sound will be set at the
two times, the radio will stop at the station where it
same volume level as last played.
began.
• Press the Mute button to mute the system. Press the
Fast Seek Up
Mute button again to un-mute the system.
• Touch and hold the Seek Up soft-key to advance the
radio through the available stations or channels at a
• Turn the rotary TUNE/SCROLL control knob clockfaster rate, the radio stops at the next available station
wise to increase or counterclockwise to decrease the
or channel when the soft-key is released.
radio station frequency. Push the ENTER/BROWSE
Seek Down
button to choose a selection.
Enter/Browse & Tune/Scroll Control
Seek Functions
Seek Up
• Touch and release the Seek Up soft-key to tune the
radio to the next listenable station or channel.
• Touch and release the Seek Down soft-key to tune the
radio to the next listenable station or channel.
• During a Seek Down function, if the radio reaches the
starting station after passing through the entire band
two times, the radio will stop at the station where it
began.
Fast Seek Down
26 Uconnect™ ACCESS USER’S MANUAL
SiriusXM™ Satellite Radio uses direct satellite-to-receiver
broadcasting technology to provide clear digital sound,
coast to coast. The subscription service provider is SiriusXM™ Satellite Radio. This service offers over 130
channels of music, sports, news, entertainment, and
Setting Presets
programming for children, directly from its satellites and
The Presets are available for all Radio Modes, and are broadcasting studios. A one-year SiriusXM™ Satellite
activated by touching any of the four Preset soft keys, Radio subscription is included.
located at the top of the screen.
SiriusXM™ and all related marks and logos are tradeWhen you are receiving a station that you wish to marks of SiriusXM™ Radio Inc. and its subsidiaries.
commit into memory, press and hold the desired num- SiriusXM™ Satellite Radio requires a subscription, sold
bered soft-key for more that 2 seconds or until you hear separately after trial subscription included with vehicle
a confirmation beep.
purchase. Prices and programming are provided by
The Radio stores up to 12 presets in each of the Radio SiriusXM™ and are subject to change. Subscriptions
modes. 4 presets are visible at the top of the radio screen. governed by Terms & Conditions available at sirius.com/
serviceterms. SiriusXM™ Radio U.S. service only availTouching the “all” soft-key on the radio home screen will able to those at least 18 years of age in the 48 contiguous
display all of the preset stations for that mode.
United States, D.C., and PR. Service available in Canada;
see www.siriuscanada.ca.
SiriusXM™ Satellite Radio Mode
• Touch and hold the Seek Down soft-key to advance the
radio through the available stations or channel at a
faster rate, the radio stops at the next available station
or channel when the soft-key is released.
Uconnect™ ACCESS USER’S MANUAL
27
This functionality is only available for radios equipped • Touch the Equalizer soft-key to adjust the Bass, Mid
and Treble. Use the + or - soft-key to adjust the
with a Satellite receiver. In order to receive satellite radio,
equalizer to your desired settings. Press the back
the vehicle needs to be outside with a clear view to the
arrow soft-key when done.
sky.
If the screen shows Acquiring Signal, you might have to Balance/Fade
change the vehicle’s position in order to receive a signal.
• Touch the Balance/Fade soft-key to adjust the sound
In most cases, the satellite radio does not receive a signal
from the speakers. Use the arrow soft-key to adjust the
in underground parking garages or tunnels.
sound level from the front and rear or right and left
Audio
side speakers. Touch the Center 9C9 soft-key to reset
the balance and fade to the factory setting. Press the
1. Press the SETTINGS hard-key on the right side of the
back arrow soft-key when done.
unit.
Speed Adjustable
2. Then scroll down and press the Audio soft-key to get
to the Audio menu.
• Touch the Speed Adjusted Volume soft-key to select
between OFF, 1, 2 or 3. This will decrease the radio
3. The Audio Menu shows the following options for you
volume relative to a decrease in vehicle speed. Press
to customize your audio settings.
the back arrow soft-key when done.
Equalizer
Loudness
28 Uconnect™ ACCESS USER’S MANUAL
• Touch the Loudness soft-key to select the Loudness 2. Touch the Up or Down arrows to adjust the hours or
feature. When this feature is activated it improves
minutes, next select the AM or PM soft-key. You can
sound quality at lower volumes.
also select 12hr or 24hr format by touching the desires
soft-key.
Clock Setting
There are two ways to enter the clock setting procedure 3. Once the time is set press the “Done” soft-key to exit
the time screen.
on the Uconnect™ 5.0 system.
1. Press the More hard-key on the right side of the Media Mode
display, next press the Time soft-key and then press
the Set soft-key. OR Press the Settings hard-key on the
right side of the display, then press the Clock soft-key.
The Time setting screen is displayed and the clock can
be adjusted as described in the following procedure.
Media Mode is entered by touching the Media hard-key
located on the side of the display. Once in Media Mode,
touch Source soft-key and the desired mode soft-key.
Disc, USB, AUX and Bluetooth are the Media sources
available.
NOTE: In the Clock Setting Menu you can also select Common Media Functions
Display Clock. Display Clock turns the clock display in
Seek Up/Down
the status bar on or off.
Touch and release the right arrow soft-key for the next
selection. Touch and release the left arrow soft-key to
return to the beginning of the current selection, or return
Uconnect™ ACCESS USER’S MANUAL
29
to the beginning of the previous selection if the Disc is Shuffle
within the first second of the current selection.
Touch the shuffle soft-key to play the selections on the
Fast Seek Up: Touch and hold the right arrow soft-key USB/iPodt device in random order to provide an interand the desired mode will begin to fast forward through esting change of pace. Touch the soft-key a second time to
turn this feature off.
the current track until the soft-key is released.
Fast Seek Down: Touch and hold the left arrow soft-key Audio
and the desired mode will begin to rewind through the Refer to Operating Instructions – Radio Mode for adjustcurrent track until the soft-key is released.
ing the audio settings.
Source
Disc Mode
Touch the Source soft-key to select the desired audio If Equipped, your vehicle may have a remote Disc player
source, Disc, AUX or USB/iPodt. This screen will time located in the lower center console storage bin.
out after a few seconds and return to the main radio
Disc Mode is entered by either inserting a CD/Disc or by
screen if no selection is made.
touching the Media hard-key located on the side of the
Info
display. Once in Media Mode, touch the source soft-key
Touch the Info soft-key to display the current track and select Disc.
information. Touch the “X” soft-key to cancel this feature. Inserting Compact Disc
30 Uconnect™ ACCESS USER’S MANUAL
Gently insert one Disc into the Disc player with the Disc
label following the illustration indicated on the player.
The Disc will automatically be pulled into the Disc player
and the Disc icon will illuminate on the radio display. If
a Disc does not go into the slot more than 1.0 in (2.5 cm),
a disc may already be loaded and must be ejected before
a new Disc can be loaded.
Press the EJECT button to eject the Disc. If you have
ejected a Disc and have not removed it within 10 seconds,
it will be reloaded. If the Disc is not removed, the radio
will reinsert the Disc but will not play it.
If you insert a Disc with the ignition ON and the radio
ON, the unit will switch to Disc mode and begin to play
when you insert the Disc. The display will show the track
number, and index time in minutes and seconds. Play
will begin at the start of track 1.
USB/iPodt Mode is entered by either inserting a USB
Jump Drive or iPodt cable into the USB port or by
touching the Media hard-key located left of the display.
Once in Media Mode, touch the source soft-key and select
USB/iPodt.
Browse
Inserting USB/iPodt Device
A Disc can be ejected with the radio and ignition OFF.
USB/iPodt Mode
Touch the browse soft-key to scroll through and select a Gently insert the USB/iPodt device into the USB Port. If
desired track on the Disc. Touch the exit soft-key if you you insert a USB/iPodt device with the ignition ON, the
unit will switch to USB/iPodt mode and begin to play
wish to cancel the browse function.
Eject Button – Ejecting a Disc
Uconnect™ ACCESS USER’S MANUAL
31
when you insert the device. The display will show the Gently insert the Auxiliary device cable into the AUX
track number, and index time in minutes and seconds. Port. If you insert a Auxiliary device with the ignition
Play will begin at the start of track 1.
ON, the unit will switch to AUX mode and begin to play
when you insert the device cable.
Browse
Touch the Browse soft-key to select Artist, Albums,
Genres, Songs, Playlists or Folders from the USB/iPodt
device. Once the desired selection is made you can chose
from the available media by touching the soft-key. Touch
the exit soft-key if you wish to cancel the browse function.
Controlling the Auxiliary Device
AUX Mode
NOTE: The vehicle radio unit is acting as the amplifier
for audio output from the Auxiliary device. Therefore if
the volume control on the Auxiliary device is set too low,
there will be insufficient audio signal for the radio unit to
play the music on the device.
The control of the auxiliary device (e.g., selecting playlists, play, fast forward, etc.) cannot be provided by the
radio; use the device controls instead. Adjust the volume
with the VOLUME rotary knob, or with the volume of the
attached device.
AUX Mode is entered by inserting a AUX device using a
cable with a 3.5 mm audio jack into the AUX port or by
touching the Media hard-key located left of the display.
Once in Media Mode, touch the source soft-key and select
AUX.
Bluetootht Mode
Inserting Auxiliary Device
32 Uconnect™ ACCESS USER’S MANUAL
Bluetootht Streaming Audio (BTSA) or Bluetootht Mode The Uconnect™ Phone allows you to dial a phone
is entered by pairing a Bluetootht device, containing number with your mobile phone using simple voice
commands.
music, to the Uconnect™ Access system.
Before proceeding, the Bluetootht device needs to be NOTE:
paired through Uconnect™ Phone in order to communi• The Uconnect™ Phone requires a mobile phone
cate with the Uconnect™ Access System.
equipped with the Bluetootht Hands-Free Profile,
NOTE: See the pairing procedure in the in this manual
Version 1.0 or higher. For Uconnect™ customer supfor further details.
port, call 1–877–855–8400 or visit www.UconnectPhone.com.
Once the Bluetootht device is paired to the Uconnect™
Access System, touch the Media hard-key located on the • Prior to starting the pairing procedure, ensure all
left side of the display. Once in Media Mode, touch the
additional Bluetootht devices or phones within the
source soft-key and select Bluetootht.
vehicle have their Bluetootht disabled.
Uconnect™ Phone
Pairing a Phone
The Uconnect™ Phone is a voice-activated, hands-free, To use the Uconnect™ Phone feature, you must first pair
in-vehicle communications system with Voice Command your Bluetootht phone with the Uconnect™ system.
Capability (see Voice Command section).
Refer to www.UconnectPhone.com for pairing procedure
unique to your phone.
Uconnect™ ACCESS USER’S MANUAL
Start Pairing Procedure
• Press the “Phone” button to begin.
• Wait for the “ready” prompt and BEEP.
• (After the BEEP), say “Setup Phone Pairing”.
• (After the BEEP), say “Pair a Phone”.
• Follow the audible prompts.
33
NOTE: For assistance in pairing your phone, contact
Uconnect™ customer support at 1–877–855–8400 or visit
www.UconnectPhone.com for phone compatibility, pairing instructions and details.
• When your phone finds the system, select “Uconnect”
as the paired device.
• When prompted on the phone, enter the 4-digit PIN
number shown on the radio display.
• You will then be asked if paired device should be set to
• If your phone asks you to accept a connection request
favorite.
from Uconnect, select “Yes”. If available, check the box
Device
telling it not to ask again – that way your phone will
automatically connect each time you start the vehicle.
• Uconnect™ Phone will say 9Start pairing procedure on
device9
Phonebook Download – Phonebook Transfer From
• Search for available devices on your Bluetootht enMobile Phone
abled mobile phone. This is usually within Settings or
Options under “Bluetooth”. See your mobile phone’s If equipped and specifically supported by your phone,
Uconnect™ Phone will ask you if you want to download
manual for details.
34 Uconnect™ ACCESS USER’S MANUAL
names (text names) and number entries from your mobile
phone’s phonebook. Specific Bluetootht Phones with
Phone Book Access Profile may support this feature. See
www.UconnectPhone.com for supported phones.
downloaded names can be used. Until then, if available, the previously downloaded phonebook is available for use.
• Only the phonebook of the currently connected mobile
Download and update, if supported, begins as soon as
phone is accessible.
the Bluetootht wireless phone connection is made to the
Uconnect™ Phone, for example, after you start the ve- • Only the mobile phone’s phonebook is downloaded.
SIM card phonebook is not part of the Mobile
hicle.
phonebook.
NOTE:
• This downloaded phonebook cannot be edited or
• You may be asked for permission to initiate the phonedeleted on the Uconnect™ Phone. These can only be
book download.
edited on the mobile phone. The changes are transferred and updated to Uconnect™ Phone on the next
• A maximum of 1000 entries per phone will be downphone connection.
loaded and updated every time a phone is connected
to the Uconnect™ Phone.
Making A Phone Call
• Depending on the maximum number of entries down- Press the “Phone” button.
loaded, there may be a short delay before the latest (After the BEEP), say “dial” (or “call” a name).
Uconnect™ ACCESS USER’S MANUAL
35
Use the radio VOLUME rotary knob to adjust the volume
to a comfortable level while the Uconnect™ system is
When an incoming call rings or is announced on
speaking. Please note the volume setting for Uconnect™
Uconnect™, press the Phone button.
is different than the audio system.
To end a call, press the Phone button on steering wheel or
Uconnect™ Voice Command
the Phone soft-key on the radio screen.
Receiving A Call – Accept (And End)
Mute (Or Unmute) Microphone During Call
During a call, press the “Voice Command” button.
(After the BEEP), say “mute” (or “mute off”).
The Uconnect™ Voice Command system allows you to
control your AM, FM, satellite radio, CD player,
Uconnect™ Phone and supported portable media devices.
When you press the “Voice Command” button located on
the steering wheel, you will hear a beep. The beep is your
During a call, press the “Voice Command” button.
signal to give a command. If you do not say a command
within a few seconds, the system will present you with a
(After the BEEP), say “transfer call”.
list of options. If you ever wish to interrupt the system
Changing The Volume
while it lists options, press the “Voice Command” button
Start a dialogue by pressing the “Phone” button , then , listen for the BEEP, and say your command.
adjust the volume during a normal call.
Voice Command Operation
Transfer Ongoing Call Between Handset And Vehicle
36 Uconnect™ ACCESS USER’S MANUAL
Start a dialogue by pressing the “Voice Command”
button , you will hear a beep. The beep is your signal to
give a command. Below are a list of voice commands for
each of the different modes.
NOTE: To access the tutorial, press the “Voice Command” button . After the BEEP, say “tutorial”. Press any
hard-key/button or touch the display (Touch-Screen radio) to cancel the tutorial.
Main Menu
Common Voice Commands (Examples)
“Radio AM” (to switch to the AM mode)
“Radio FM” (to switch to the FM mode)
“Satellite Radio” (to switch to the Satellite mode)
“Disc” (to switch to the disc mode)
“USB” (to switch to the USB mode)
“Bluetooth Streaming” (to switch to the Bluetooth Streaming mode)
“Memo” (to switch to the memo recorder)
“System Setup” (to switch to system setup)
Uconnect™ ACCESS USER’S MANUAL
Radio AM, Radio FM
Modes
SiriusXM™ Satellite Radio Mode
Disc Mode
“Frequency 97.1” (to change to radio station 97.1)
“Frequency” (to change the frequency)
“Next Station” (to select the next station)
“Previous Station” (to select the previous station)
“Radio Menu” (to switch to the radio menu)
“Main Menu” (to switch to the main menu)
“Channel Number” (to change the channel by its spoken number)
“Next Channel” (to select the next channel)
“Previous Channel” (to select the previous channel)
“List Channel” (to hear a list of available channels)
“Channel Name” (to change the channel by its spoken name)
“Radio Menu” (to switch to the radio menu)
“Main Menu” (to switch to the main menu)
“Track” (#) (to change the track)
“Next Track” (to play the next track)
“Previous Track” (to play the previous track)
“Main Menu” (to switch to the main menu)
37
38 Uconnect™ ACCESS USER’S MANUAL
USB Mode
Bluetootht Streaming
(BT) Mode
“Next Track” (to play the next track)
“Previous Track” (to play the previous track)
“Play” (to play a Artist Name, Playlist Name, Album Name, Track Name, etc.)
“List” (to List a Artist, Playlist, Album, Track, etc.)
“Next Track” (to play the next track)
“Previous Track” (to play the previous track)
SMS (Text Messaging)
If equipped with Uconnect™ Voice Command, your
radio may be able to play incoming Short Message
Service (SMS) messages (text messages) through the
vehicle’s sound system.
It also allows you to respond by selecting from various
pre-defined phrases.
Not all phones are compatible with this feature. Refer to
the phone compatibility list at www.UconnectPhone.com. Connected mobile phones must be
bluetooth-compatible, and paired with your radio.
Press the “Voice Command” button and after the BEEP,
say “SMS” to get started.
WARNING!
ALWAYS drive safely with your hands on the wheel.
You have full responsibility and assume all risks
related to the use of the Uconnect™ features and
applications in this vehicle. Only use Uconnect™
when it is safe to do so. Failure to do so may result in
an accident involving serious injury or death.
Uconnect™ ACCESS USER’S MANUAL
39
Settings Main Menu
• Doors & Locks — Refer to “Understanding Your
Instrument Panel”, “Uconnect™ Access System” secPress the Settings hard-key to display the Settings Main
tion in your vehicle Owner’s Manual on the DVD for
Menu. The Settings Main Menu contains the following
details.
options:
• Heated Seats — Refer to “Understanding The Features
• Display — Refer to “Understanding Your Instrument
Of Your Vehicle”, “Seats” section in your vehicle
Panel”, “Uconnect™ Access System” section in your
Owner’s Manual on the DVD for details.
vehicle Owner’s Manual on the DVD for details.
• Engine Off Options — Refer to “Understanding Your
• Clock — Refer to the “Radio” section for details.
Instrument Panel”, “Uconnect™ Access System” sec• Safety/Assistance — Refer to “Understanding Your
tion in your vehicle Owner’s Manual on the DVD for
Instrument Panel”, “Uconnect™ Access System” secdetails.
tion in your vehicle Owner’s Manual on the DVD for
• Compass Settings — Refer to “Understanding Your
details.
Instrument Panel”, “Uconnect™ Access System” sec• Lights — Refer to “Understanding Your Instrument
tion in your vehicle Owner’s Manual on the DVD for
Panel”, “Uconnect™ Access System” section in your
details.
vehicle Owner’s Manual on the DVD for details.
• Audio — Refer to the Operating Instructions – Radio
section in this manual for details.
40 Uconnect™ ACCESS USER’S MANUAL
• Phone/Bluetooth — Refer to the “Uconnect™ Phone”
section in this manual for details.
• Sirius Setup — Refer to the “Radio” section in this
manual for details.
More Main Menu
Press the More hard-key to display the More Main Menu.
The More Main Menu contains the following options:
• Phone — Refer to the “Uconnect™ Phone” section in
this manual for details.
• Outlet (If Equipped) — Refer to “Understanding The
Features Of Your Vehicle”, “Power Inverter” section in
your vehicle Owner’s Manual on the DVD for details.
• Time — Refer to the Uconnect™ 5.0 “Radio Mode”
section in this manual for details.
Uconnect™ ACCESS USER’S MANUAL
Uconnect™ 8.4A
Uconnect™ 8.4A System
41
Touch the Radio soft-key to enter the Radio Mode. The
different tuner modes; AM, FM and SXM can be selected
by touching the corresponding soft-keys in the Radio
Mode.
2. Media
Touch the Media soft-key to access media sources such
as: Disc, USB Device and AUX as long as the requested
media is present.
3. Climate
Refer to Climate Controls in your vehicles Owner’s
Manual on the DVD for further details.
4. Nav (If Equipped)
1. Radio
The Uconnect™ 8.4A System is Navigation-ready, see
your authorized dealer for details.
5. Phone
42 Uconnect™ ACCESS USER’S MANUAL
Touch the Phone soft-key to access the Uconnect™ Phone Press the BACK button to return to a previous menu or
feature.
screen.
6. Apps
10. SCREEN OFF
Touch the Apps soft-key to access Smartphone and Press the SCREEN OFF hard-key to turn the touch-screen
Connected vehicle options.
OFF. To turn the screen back ON, just touch the screen.
7. Settings
11. VOLUME & MUTE
Touch the Settings soft-key to display the list of available Rotate the rotary knob to adjust the Volume. Press the
settings. Refer to Understanding Your Instrument Panel Mute button to mute the system.
section in your vehicles Owner’s Manual on the DVD for
Radio Mode
further details.
The radio is equipped with the following modes:
8. ENTER/BROWSE & TUNE/SCROLL
• FM
Press the ENTER/BROWSE button to accept a highlighted selection on the screen. Rotate the TUNE/ • AM
SCROLL rotary knob to scroll through a list or tune a
• SiriusXM™ Satellite Radio (if equipped)
radio station.
9. BACK
Uconnect™ ACCESS USER’S MANUAL
43
Touch the RADIO Soft Key, bottom left corner, to enter
the Radio Mode. The different tuner modes; AM, FM, and
SAT, can then, be selected by touching the corresponding
soft-keys in the Radio mode.
Turn the rotary TUNE/SCROLL control knob clockwise
to increase or counterclockwise to decrease the radio
station frequency. Push the ENTER/BROWSE button to
choose a selection.
ON/OFF & Volume Control
Screen Close
Push the ON/OFF Volume control knob to turn on the The Red X Soft key at the top right, provides a means to
radio. Push the ON/OFF Volume control knob a second close the Direct Tune Screen. The Direct Tune Screen also
time to turn off the radio.
auto closes if no activity occurs within 10 seconds.
The electronic volume control turns continuously (360 Seek and Direct Tune Functions
degrees) in either direction, without stopping. Turning
The Seek Up and Down functions are activated by
the Volume control knob clockwise increases the volume,
touching the double arrow soft-keys to the right and left
and counter-clockwise decreases it.
of the radio station display, or by pressing the left
When the audio system is turned on, the sound will be Steering Wheel Audio Control (if equipped) up or down.
set at the same volume level as last played.
Seek Up
Tune/Scroll Control
Touch and release the Seek Up soft-key to tune the radio
to the next listenable station or channel. During a Seek
44 Uconnect™ ACCESS USER’S MANUAL
Up function, if the radio reaches the starting station after Touch and hold the Seek Down soft-key to advance the
passing through the entire band two times, the radio will radio through the available stations or channel at a faster
stop at the station where it began.
rate, the radio stops at the next available station or
channel when the soft-key is released.
Fast Seek Up
Direct Tune
Touch and hold the Seek Up soft-key to advance the radio
through the available stations or channels at a faster rate, Press the Tune soft-key located at the bottom of the radio
the radio stops at the next available station or channel screen. The Direct Tune soft-key screen is available in
when the soft-key is released.
AM, FM, and SAT radio modes and can be used to direct
tune the radio to a desired station or channel.
Seek Down
Press the available number soft-key to begin selecting a
Touch and release the Seek Down soft-key to tune the
desired station. Once a number has been entered, any
radio to the next listenable station or channel. During a
numbers that are no longer possible (stations that cannot
Seek Down function, if the radio reaches the starting
be reached) will become deactivated / grayed out.
station after passing through the entire band two times,
Undo
the radio will stop at the station where it began.
Fast Seek Down
You can backspace an entry by touching the bottom left
Undo soft key.
GO
Uconnect™ ACCESS USER’S MANUAL
45
When touched, the green GO soft key allows the you to You can switch between the two radio presets by touchcommit an entry, at which time the radio will tune to the ing the arrow soft key located in the upper right of the
entered station or channel and close the Direct Tune radio screen.
Screen.
Browse in AM/FM
The selected Station or Channel number is displayed in
When in either AM or FM, the Browse Screen provides a
the Direct Tune text box.
means to edit the Presets List and is entered by touching
Setting Presets
the browse soft key.
The Presets are available for all Radio Modes, and are Scrolling Preset List
activated by touching any of the six Preset soft keys,
Once in the Browse Presets screen, you can scroll the
located at the top of the screen.
preset list by rotation of the Tune Knob, or by touching
When you are receiving a station that you wish to the Up and Down arrow keys, located on the right of the
commit into memory, press and hold the desired num- screen.
bered soft-key for more that 2 seconds or until you hear
Preset Selection from List
a confirmation beep.
The Radio stores up to 12 presets in each of the Radio A Preset can be selected by touching any of the listed
modes. A set of 6 presets are visible at the top of the radio Presets, or by pressing the ENTER/BROWSE button on
the Tune Knob to select the currently highlighted Preset.
screen.
46 Uconnect™ ACCESS USER’S MANUAL
When selected, the radio tunes to the station stored in the programming for children, directly from its satellites and
broadcasting studios. A one-year SiriusXM™ Satellite
Preset and returns to the main radio screen.
Radio subscription is included.
Deleting Presets
SiriusXM™ and all related marks and logos are tradeA Preset can be deleted in the Presets Browse screen by
marks of SiriusXM™ Radio Inc. and its subsidiaries.
touching the Trash Can Icon for the corresponding Preset.
SiriusXM™ Radio requires a subscription, sold separately after trial subscription included with vehicle purReturn to Main Radio Screen
chase. Prices and programming are provided by SiriYou can return to the Main Radio Screen, by touching the
usXM™ and are subject to change. Subscriptions
X soft key when in the Browse Presets screen.
governed by Terms & Conditions available at sirius.com/
serviceterms. SiriusXM™ Radio U.S. service only availSiriusXM™ Satellite Radio Mode
able to those at least 18 years of age in the 48 contiguous
SiriusXM™ Satellite radio uses direct satellite-to-receiver
United States, D.C., and PR. Service available in Canada;
broadcasting technology to provide clear digital sound,
see www.siriuscanada.ca.
coast to coast. The subscription service provider is SiriusXM™ Satellite Radio. This service offers over 130 This functionality is only available for radios equipped
channels of music, sports, news, entertainment, and with a Satellite receiver. In order to receive satellite radio,
the vehicle needs to be outside with a clear view to the
sky.
Uconnect™ ACCESS USER’S MANUAL
47
If the screen shows Acquiring Signal, you might have to When in Satellite mode:
change the vehicle’s position in order to receive a signal.
• The SAT button is highlighted blue.
In most cases, the satellite radio does not receive a signal
in underground parking garages or tunnels.
• The SiriusXM™ Presets are displayed at the top of the
screen.
No Subscription
• The Genre is displayed below the Presets Bar.
Radios equipped with a Satellite receiver, require a
subscription to the Sirius Service. When the Radio does • The SiriusXM™ Channel Number is displayed in the
center.
not have the necessary subscription, the Radio is able to
receive the Traffic/Weather channel only.
• The Program Information is displayed at the bottom of
the Channel Number.
Acquiring SiriusXM™ Subscription
To activate the Sirius subscription, call the toll free • The SiriusXM™ function soft-keys are displayed below the Program Information.
number on the Weather channel. You will need to provide the Sirius ID (SID) located at the bottom of the
Tuning is done by operating the Tune Knob or by Direct
Channel 0 screen.
Tune, similar to other Radio Bands, see Presets, browse,
The Satellite Mode is activated by a touch of the SAT Tune Knob, and Direct Tune.
soft-key.
48 Uconnect™ ACCESS USER’S MANUAL
In addition to the tuning Operation functions common to Touch the Pause or Play soft-key to pause playing of the
all Radio modes, the replay, Traffic/Weather Jump, and content at any time that the content is playing live or
fav soft-key functions are available in SiriusXM™ Mode. rewound content. Play can be resumed again by touching
of the Pause/Play soft-key.
Replay
Rewind
The replay function provides a means to store and replay
up to 22 minutes of music audio and 48 minutes of talk Touch the RW soft-key to rewind the content in steps of
radio. Once the channel is switched, content in replay 5 seconds. Touching the RW soft-key for more than 2
memory is lost
seconds rewinds the content. The Radio begins playing
the content at the point at which the touch is released.
Touch the replay soft-key. The play/pause, rewind/
forward and live soft-keys will display at the top of the Forward
screen, along with the replay time.
Each touch of the FW soft-key forwards the content in
You can exit by touching the replay soft-key, any time steps of 5 seconds. Forwarding of the content can only be
during the Replay mode.
done when the content is previously rewound, and
therefore, can not be done for live content. A continuous
Play/Pause
touch of the FW soft-key also forwards the content. The
Radio begins playing the content at the point at which the
touch is release.
Uconnect™ ACCESS USER’S MANUAL
49
Fav. Artist While the song is playing to set a Favorite
Artist, touch the fav. soft-key and then the Fav. Artist
Touch the Live soft-key to resume playing of Live consoft-key.
tent.
Fav. Song While the song is playing to set a Favorite
Favorites
Song, touch the fav. soft-key and then the Fav Song
Touch the fav. soft-key to activate the favorites menu, soft-key.
which will time out in 5 seconds in absence of user
Traffic & Weather
interaction.
Touch the Traffic & Weather soft-key to tune to a SiriYou can exit the Favorites Menu by a touch of the X in the
usXM™ Traffic and Weather channel. To set a Traffic &
top right corner.
Weather alert for any one of the cities in the Jump Browse
The favorites feature enables you to set a favorite artist, list, see Browse in SAT.
or song that is currently playing. The Radio then uses this
When the Traffic & Weather soft-key is touched, the
information to alert you when either the favorite song, or
Traffic & Weather channel is tuned.
favorite artist are being played at any time by any of the
If the Traffic & Weather alert City is not set, you are
SIRIUS Channels.
presented with a pop up to allow you to select the
The maximum number of favorites that can be stored in
favorite city using the Browse Screen.
the Radio is 50.
Live
50 Uconnect™ ACCESS USER’S MANUAL
Browse in SAT
Genre
Touch the browse soft-key to edit Presets, Favorites, Touch the Genre button to display a list of Genres. You
Game Zone, and Jump settings, along with providing the can select any desired Genre by touching the Genre list, at
SiriusXM™ Channel List.
which point, the Radio tunes to a channel with the
This Screen contains many sub menus. You can exit a sub content in the selected Genre.
menu to get back to a parent menu by a touch of the Back Presets
Arrow.
Touch the Presets soft-key located at the left of the
All
Browse screen.
Touch the All soft-key at the left of the Browse Screen.
You can scroll the Presets list touching the up and down
arrows, located at the right side of the screen. Scrolling
Channel List
can also be done by operating the Tune/Scroll Knob as
Touch the Channel List to display all the SiriusXM™ well.
Channel Numbers along with the corresponding Genre.
Preset Selection
You can scroll the Channel list by touching the up and
down arrows, located on the right side of the screen. A Preset can be selected by touching any of the listed
Scrolling can also be done by operating the Tune/Scroll Presets, or by pressing the ENTER/BROWSE button on
Knob.
the Tune Knob to select the currently highlighted Preset.
Uconnect™ ACCESS USER’S MANUAL
51
When selected, the Radio tunes to the station stored in Remove Favorites
the Preset, and returns to the main Radio screen.
Touch the Remove Favorites tab at the top of the screen.
Touch the Delete All soft-key to delete all of the Favorites
Deleting a Preset
or touch the Trash Can icon next to the Favorite to be
A Preset can be deleted in the Presets Browse screen by
deleted.
touching the Trash Can Icon for the corresponding Preset.
Alert Settings
Favorites
Touch the Alert Setting tab at the top of the screen. The
Touch the Favorites soft-key, located at the left of the
Alert Settings menu allows you to choose from a Visual
Browse screen.
alert or Audible and Visual alert when one of your
The Favorites menu provides a means to Edit the Favor- favorites is airing on any of the SiriusXM™ channels.
ites list and to configure the Alert Settings, along with
Game Zone
providing a list of Channels currently airing any of the
Touch the Game Zone soft-key, located at the left of the
items in the Favorites list.
Browse screen. This feature provides you with the ability
You can scroll the Favorites list touching the up and
to select teams, edit the selection, and set alerts.
down arrows, located at the right side of the screen.
Scrolling can also be done by operating the Tune/Scroll On Air
Knob as well.
52 Uconnect™ ACCESS USER’S MANUAL
Touch the On-Air tab at the top of the screen. The On-Air
list provides a list of Channels currently airing any of the
items in the Selections list, and touching any of the items
in the list tunes the radio to that channel.
Select Teams
Touch the Select Teams soft-key to activate the League
Scroll list. Touch the chosen league and a scroll list of all
teams within the league will appear, then you can select
a team by touching the corresponding box. A check mark
appears for all teams that are chosen.
Remove Selection
Touch the Alert Setting tab at the top of the screen. The
Alert Settings menu allows you to choose from “Alert me
to on-air games upon start” or “Alert upon score update”
or both when one or more of your selections is airing on
any of the SiriusXM™ channels.
Audio
Touch of the Audio soft-key to activate the Audio settings
screen to adjust Balance\Fade, Equalizer, And Speed
Adjusted Volume.
You can return to the Radio screen by touching the X
located at the top right.
Touch the Remove Selection tab at the top of the screen. Balance/Fade
Touch the Delete All soft-key to delete all of the Selections
or touch the Trash Can icon next to the Selection to be
deleted.
Alert Settings
Uconnect™ ACCESS USER’S MANUAL
53
Equalizer
Touch the Balance/Fade soft-key to Balance audio between the front speakers or fade the audio between the Touch the Equalizer soft-key to activate the Equalizer
rear and front speakers.
screen.
Touching the Front, Rear, Left, or Right soft-keys or touch Touch the + or - soft-keys, or by touching and dragging
and drag the blue Speaker Icon to adjust the Balance/ over the level bar for each of the equalizer bands. The
Fade.
level value, which spans between ±9, is displayed at the
bottom of each of the Bands.
54 Uconnect™ ACCESS USER’S MANUAL
Speed Adjusted Volume
audio volume with variation to vehicle speed. Volume
increases automatically as speed increase to compensate
for normal road noise.
Surround System (If Equipped)
Touch the On soft-key to activate Surround Sound. Touch
Off to deactivate this feature.
When Surround Sound is On, you can hear audio coming
from every direction as in a movie theatre or home
theatre system.
Media Mode
OPERATING INSTRUCTIONS – DISC MODE
Touch the Speed Adjusted Volume soft-key to activate the
Overview
Speed Adjusted Volume screen.
The Speed Adjusted Volume is adjusted by touching of Disc Mode is entered by either inserting a Disc or touch
the + and - buttons or by touching, and dragging over the the Disc soft-key on the left side of the display. Once in
Level Bar This alters the automatic adjustment of the Media Mode, touch the source soft-key and select Disc.
Uconnect™ ACCESS USER’S MANUAL
55
A “No Disc” message will be displayed on the screen in which can be scrolled by touching the Up and Down
the Disc mode when a Disc is not present in the Radio. soft-keys to the right. The Scroll/Tune knob can also be
used to scroll.
Seek Up/Down
Source
Touch and release the right arrow soft-key for the next
selection on the Disc. Touch and release the left arrow Touch the Source soft-key to select the desired audio
soft-key to return to the beginning of the current selec- source, Disc, USB/iPodt, SD Card, AUX or Bluetootht.
tion, or return to the beginning of the previous selection This screen will time out after a few seconds and return
if the Disc is within the first second of the current to the main radio screen if no selection is made.
selection.
Repeat
Browse
Touch the repeat soft-key to toggle the repeat functionTouch the browse soft-key to display the browse window. ality. The Repeat soft-key is highlighted when active. The
The left side of the browse window displays a list of ways Radio will continue to play the current track, repeatedly,
you can browse through the contents of the Disc. If as long as the repeat is active.
supported by the device, you can browse by Folders,
Shuffle
Artists, Playlists, Albums, Songs, etc. Touch the desired
soft-key on the left side of the screen. The center of the
browse window shows items and it’s sub-functions,
56 Uconnect™ ACCESS USER’S MANUAL
Touch the shuffle soft-key to play the selections on the
compact disc in random order to provide an interesting
change of pace. Touch the soft-key a second time to turn
this feature off.
USB/iPodt Mode is entered by either inserting a USB
device or iPodt and cable into the USB Port or touch the
iPodt soft-key on the left side of the display. Once in
Media Mode, touch the source soft-key and select iPodt.
Info
Seek Up/Down
Touch the Info soft-key to display the current track Touch and release the right arrow soft-key for the next
information. Touch the Info soft-key a second time to selection on the USB device/iPodt. Touch and release the
left arrow soft-key to return to the beginning of the
cancel this feature.
current selection, or return to the beginning of the
Tracks
previous selection if the USB device/iPodt is within the
Touch the trks soft-key to display a pop up with the Song first second of the current selection.
List. The currently playing song is indicated by an arrow
Browse
and lines above and below the song title.
Touch the browse soft-key to display the browse window.
OPERATING INSTRUCTIONS – USB/iPodt
The left side of the browse window displays a list of ways
MODE
you can browse through the contents of the USB device/
Overview
iPodt. If supported by the device, you can browse by
Folders, Artists, Playlists, Albums, Songs, etc. Touch the
Uconnect™ ACCESS USER’S MANUAL
desired soft-key on the left side of the screen. The center
of the browse window shows items and it’s subfunctions, which can be scrolled by touching the Up and
Down soft-keys to the right. The Scroll/Tune knob can
also be used to scroll.
Source
57
Touch the shuffle soft-key to play the selections on the
USB/iPodt device in random order to provide an interesting change of pace. Touch the soft-key a second time to
turn this feature off.
Info
Touch the Info soft-key to display the current track
Touch the Source soft-key to select the desired audio information. Touch the Info soft-key a second time to
source, Disc, USB/iPodt, SD Card, AUX or Bluetootht. cancel this feature.
This screen will time out after a few seconds and return
Tracks
to the main radio screen if no selection is made.
Touch the trks soft-key to display a pop up with the Song
Repeat
List. The currently playing song is indicated by an arrow
Touch the repeat soft-key to toggle the repeat function- and lines above and below the song title. When in the
ality. The Repeat soft-key is highlighted when active. The Tracks List screen you can rotate the TUNE/SCROLL
Radio will continue to play the current track, repeatedly, knob to highlight a track (indicated by the line above and
below the track name) and then press the ENTER/
as long as the repeat is active.
BROWSE knob to start playing that track.
Shuffle
58 Uconnect™ ACCESS USER’S MANUAL
Touching the trks soft-key while the pop up is displayed Controlling the Auxiliary Device
will close the pop up.
The control of the auxiliary device (e.g., selecting playlists, play, fast forward, etc.) cannot be provided by the
Audio
radio; use the device controls instead. Adjust the volume
Refer to Radio Mode for adjusting the audio settings.
with the ON/OFF VOLUME rotary knob, or with the
OPERATING INSTRUCTIONS – AUX MODE
volume of the attached device.
Overview
NOTE: The vehicle radio unit is acting as the amplifier
for audio output from the Auxiliary device. Therefore if
AUX Mode is entered by inserting an AUX device using
the volume control on the Auxiliary device is set too low,
a cable with a 3.5 mm audio jack into the AUX port or
there will be insufficient audio signal for the radio unit to
touch the AUX soft-key on the left side of the display.
play the music on the device.
Once in Media Mode, touch the source soft-key and select
AUX.
Source
Inserting Auxiliary Device
Touch the Source soft-key to select the desired audio
source, Disc, USB/iPodt, SD Card, AUX or Bluetootht.
Gently insert the Auxiliary device cable into the AUX
This screen will time out after a few seconds and return
Port. If you insert an Auxiliary device with the ignition
to the main radio screen if no selection is made.
ON and the radio ON, the unit will switch to AUX mode
and begin to play when you insert the device cable.
Audio
Uconnect™ ACCESS USER’S MANUAL
59
Refer to Radio Mode for adjusting the audio settings.
Touch the browse soft-key to display the browse window.
The left side of the browse window displays a list of ways
OPERATING INSTRUCTIONS – SD CARD
you can browse through the contents of the SD Card. If
MODE
supported by the device, you can browse by Folders,
Overview
Artists, Playlists, Albums, Songs, etc. Touch the desired
soft-key on the left side of the screen. The center of the
SD Card Mode is entered by either inserting a SD Card
browse window shows items and it’s sub-functions,
into the USB Port or touch the SD Card soft-key on the
which can be scrolled by touching the Up and Down
left side of the display. Once in Media Mode, touch the
soft-keys to the right. The Scroll/Tune knob can also be
source soft-key and select SD Card.
used to scroll.
Seek Up/Down
Source
Touch and release the right arrow soft-key for the next
Touch the Source soft-key to select the desired audio
selection on the SD Card. Touch and release the left arrow
source, Disc, USB/iPodt, SD Card, AUX or Bluetootht.
soft-key to return to the beginning of the current selecThis screen will time out after a few seconds and return
tion, or return to the beginning of the previous selection
to the main radio screen if no selection is made.
if the SD Card is within the first second of the current
selection.
Repeat
Browse
60 Uconnect™ ACCESS USER’S MANUAL
Touch the repeat soft-key to toggle the repeat functionality. The Repeat soft-key is highlighted when active. The
Radio will continue to play the current track, repeatedly,
as long as the repeat is active.
Shuffle
and lines above and below the song title. When in the
Tracks List screen you can rotate the TUNE/SCROLL
knob to highlight a track (indicated by the line above and
below the track name) and then press the ENTER/
BROWSE knob to start playing that track.
Touching the trks soft-key while the pop up is displayed
Touch the shuffle soft-key to play the selections on the SD
will close the pop up.
Card device in random order to provide an interesting
change of pace. Touch the soft-key a second time to turn Audio
this feature off.
Refer to Radio Mode for adjusting the audio settings.
Info
OPERATING INSTRUCTIONS – Bluetootht
Touch the Info soft-key to display the current track MODE
information. Touch the Info soft-key a second time to Overview
cancel this feature.
Bluetootht Streaming Audio (BTSA) or Bluetootht Mode
Tracks
is entered by pairing a Bluetootht device, containing
Touch the trks soft-key to display a pop up with the Song music, to the Uconnect™ Access system.
List. The currently playing song is indicated by an arrow
Uconnect™ ACCESS USER’S MANUAL
61
Before proceeding, the Bluetootht device needs to be Touch the Source soft-key to select the desired audio
paired through Uconnect™ Phone in order to communi- source, Disc, USB/iPodt, SD Card, AUX or Bluetootht .
cate with the Uconnect™ Access System.
This screen will time out after a few seconds and return
to the main radio screen if no selection is made.
NOTE: See the pairing procedure in the Uconnect™
Phone section for more details.
Tracks
To access Bluetootht mode, touch the Bluetootht soft-key Touch the trks soft-key to display a pop up with the Song
on the left side of the display.
List. The currently playing song is indicated by a blue
arrow and lines above and below the song title.
Seek Up/Down
Touching the trks soft-key while the pop up is displayed
Touch and release the right arrow soft-key for the next
will close the pop up.
selection on the Bluetootht device. Touch and release the
left arrow soft-key to return to the beginning of the Audio
current selection, or return to the beginning of the
Refer to Radio Mode for adjusting the audio settings.
previous selection if the Bluetootht device is within the
first second of the current selection.
Source
62 Uconnect™ ACCESS USER’S MANUAL
Uconnect™ Phone
Uconnect Phone™ Overview
• Calling Back the last incoming call number (“Call
Back”).
Uconnect™ Phone is a voice-activated, hands-free, in- • View Call logs on screen (“Show incoming calls”,
“Show Outgoing calls”, “Show missed Calls”, “Show
vehicle communications system. Uconnect™ Phone alRecent Calls”).
lows you to dial a phone number with your mobile
phone.
• Searching Contacts phone number (“Search for John
Smith Mobile”).
Uconnect™ Phone supports the following features:
Voice Activated Features:
Screen Activated Features
• Dialing via Keypad using touch-screen.
• Hands Free dialing via Voice (“Call John Smiths Mobile” or, “Dial 248 555-1212”).
• Viewing and Calling contacts from Phonebooks displayed on the touch-screen.
• Hands Free text to speech listening of your incoming
SMS messages.
• Setting Favorite Contact Phone numbers so the are
easily accessible on the Main Phone screen.
• Hands Free text messaging (“Send a message to John
Smiths Mobile”).
• Viewing and Calling contacts from Recent Call logs.
• Redialing last dialed numbers (“Redial”).
• Reviewing your recent Incoming SMS.
Uconnect™ ACCESS USER’S MANUAL
63
Uconnect™ Phone allows you to transfer calls between
the system and your mobile phone as you enter or exit
• Listen to Music on your Bluetootht Device via the
your vehicle and enables you to mute the system’s
touch-screen.
microphone for private conversation.
• Pairing up to 10 phones/audio devices for easy access
to connect to them quickly.
WARNING!
• Sending a text message via the touch-screen.
NOTE: Your phone must be capable of SMS messaging
via Bluetootht for messaging features to work properly.
Your mobile phone’s audio is transmitted through your
vehicle’s audio system; the system will automatically
mute your radio when using the Uconnect™ Phone.
Any voice commanded system should be used only
in safe driving conditions and all attention should be
kept on the roadway ahead. Failure to do so may
result in an accident causing serious injury or death.
The Uconnect™ Phone is driven through your
For Uconnect™ customer support, visit the following Bluetootht “Hands-Free Profile” mobile phone.
Uconnect™ features Bluetootht technology - the global
website:
standard that enables different electronic devices to con• www.UconnectPhone.com
nect to each other without wires or a docking station, so
Uconnect™ Phone works no matter where you stow your
• or call 1–877–855–8400
mobile phone (be it your purse, pocket, or briefcase), as
long as your phone is turned on and has been paired to
64 Uconnect™ ACCESS USER’S MANUAL
the vehicle’s Uconnect™ Phone. The Uconnect™ Phone
allows up to ten mobile phones or audio devices to be
linked to the system. Only one linked (or paired) mobile
phone and one audio device can be used with the system
at a time. The system is available in English, Spanish, or
French languages.
The
button is also used to access the Voice Commands for the Uconnect™ Voice Command features if
your vehicle is equipped. Please see the Uconnect™ Voice
Command section for direction on how to use the
button.
The Uconnect™ Phone is fully integrated with the vehicle’s audio system. The volume of the Uconnect™ Phone
can be adjusted either from the radio volume control
The Uconnect™ Phone
Button is used to get
knob or from the steering wheel radio control (right
into the phone mode and make calls, show
switch), if so equipped.
recent, incoming, outgoing calls, view phonebook etc., When you press the button you will Operation
hear a BEEP. The beep is your signal to give a command.
Voice commands can be used to operate the Uconnect™
Phone and to navigate through the Uconnect™ Phone
Uconnect™ Voice Command Button
menu structure. Voice commands are required after most
Button
The Uconnect™ Voice Command
Uconnect™ Phone prompts. There are two general methis only used for “barge in” and when you are
ods for how Voice Command works:
already in a call and you want to send Tones or
make another call.
Uconnect™ Phone Button
Uconnect™ ACCESS USER’S MANUAL
1. Say compound commands like “Call John Smith mobile”.
2. Say the individual commands and allow the system to
guide you to complete the task.
You will be prompted for a specific command and then
guided through the available options.
65
say each part of the command when you are asked for
it. For example, you can use the compound command
form voice command “Search for John Smith”, or you
can break the compound command form into two
voice commands: “Search Contact” and when asked
“John Smith”. Please remember, the Uconnect™ Phone
works best when you talk in a normal conversational
tone, as if speaking to someone sitting a few feet/
meters away from you.
• Prior to giving a voice command, one must wait for the
beep, which follows the “Listen” prompt or another
Natural Speech
prompt.
• For certain operations, compound commands can be
used. For example, instead of saying “Call” and then
“John Smith” and then “mobile”, the following compound command can be said: “Call John Smith
mobile”.
Your Uconnect™ Phone Voice system uses a Natural
Language Voice Recognition (VR) engine.
Natural speech allows the user to speak commands in
phrases or complete sentences. The system filters out
certain non-word utterances and sounds such as “ah”
• For each feature explanation in this section, only the and “eh”. The system handles fill-in words such as “I
compound command form of the voice command is would like to”.
given. You can also break the commands into parts and
66 Uconnect™ ACCESS USER’S MANUAL
The system handles multiple inputs in the same phrase
or sentence such as “make a phone call” and “to Kelly
Smith”. For multiple inputs in the same phrase or sentence, the system identifies the topic or context and
provides the associated follow-up prompt such as “Who
do you want to call?” in the case where a phone call was
requested but the specific name was not recognized.
To activate the Uconnect™ Phone from idle, simply press
the
button and say a command or say “help”. All
Uconnect™ Phone sessions begin with a press of the
button on the radio control head.
Cancel Command
At any prompt, after the beep, you can say “Cancel” and
you will be returned to the main menu.
The system utilizes continuous dialog; when the system
or
buttons when the
requires more information from the user it will ask a You can also press the
system
is
listening
for
command
and
be returned to the
question to which the user can respond without pressing
main
or
previous
menu.
the Voice Command
button.
Voice Command Tree
Refer to “Voice Tree” in this section.
Help Command
NOTE: Pressing the
or
buttons while the system
is playing is known as “Barging In”, refer to “Barge In —
Overriding Prompts” for further information.
Pair (Link) Uconnect™ Phone To A Mobile Phone
If you need assistance at any prompt, or if you want to
To begin using your Uconnect™ Phone, you must pair
know your options at any prompt, say “Help” following
your compatible Bluetootht enabled mobile phone.
the beep.
Uconnect™ ACCESS USER’S MANUAL
To complete the pairing process, you will need to reference your mobile phone Owner’s Manual. The
Uconnect™ website may also provide detailed instructions for pairing.
NOTE:
• You must have Bluetootht enabled on your phone to
complete this procedure.
• The vehicle must be in PARK.
1. Press the “Phone” soft-key on the screen to begin.
67
• If No is selected, touch the “Settings” soft-key from
the Uconnect™ Phone main screen,
• Touch the “Add Device” soft-key,
• Search for available devices on your Bluetootht
enabled mobile phone. When prompted on the
phone, enter the name and PIN shown on the
Uconnect Touch™ screen,
• See Step 4 to complete the process.
4. Uconnect™ Phone will display an in progress screen
while the system is connecting.
2. If there is no phone currently connected with the 5. When the pairing process has successfully completed,
the system will prompt you to choose whether or not
system, a pop-up will appear.
this is your favorite phone. Selecting Yes will make
3. Select Yes to begin the pairing process. Then, search
this phone the highest priority. This phone will take
for available devices on your Bluetootht enabled
precedence over other paired phones within range.
mobile phone. When prompted on the phone, enter
the name and PIN shown on the Uconnect Touch™
screen.
68 Uconnect™ ACCESS USER’S MANUAL
• Search for available devices on your Bluetootht enabled mobile phone. When prompted on the phone,
• Touch the “Settings” soft-key from the Phone main
enter the name and PIN shown on the Uconnect
screen,
Touch™ screen,
• Next, touch the “Phone/Bluetootht” soft-key,
• Uconnect™ Phone will display an in process screen
while the system is connecting,
Pair Additional Mobile Phones
• When the pairing process has successfully completed,
the system will prompt you to choose whether or not
this is your favorite phone. Selecting Yes will make this
phone the highest priority. This phone will take precedence over other paired phones within range.
NOTE: For phones which are not made a favorite, the
phone priority is determined by the order in which it was
paired. The latest phone paired will have the higher
priority.
• Touch the “Add Device” soft-key,
You can also use the following VR commands to bring up
the Paired Phone screen from any screen on the radio:
Uconnect™ ACCESS USER’S MANUAL
• “Show Paired Phones” or
• “Connect My Phone”
Pair A Bluetootht Streaming Audio Device
• Touch the “Player” or “Media” soft-key to begin,
• Change the Source to Bluetootht,
69
• Uconnect™ Phone will display an in process screen
while the system is connecting,
• When the pairing process has successfully completed,
the system will prompt you to choose whether or not
this is your favorite device. Selecting Yes will make
this device the highest priority. This device will take
precedence over other paired devices within range.
• Touch the “Bluetootht” soft-key to display the Paired
NOTE: For devices which are not made a favorite, the
Audio Devices screen,
device priority is determined by the order in which it was
paired. The latest device paired will have the higher
• Touch the “Add Device” soft-key,
priority.
NOTE: If there is no device currently connected with the
You can also use the following VR command to bring up
system, a pop-up will appear.
a list of paired audio devices.
• Search for available devices on your Bluetootht enabled audio device. When prompted on the device, • “Show Paired Audio Devices”
enter the name and PIN shown on the Uconnect
Touch™ screen,
70 Uconnect™ ACCESS USER’S MANUAL
Connecting To A Particular Mobile Phone Or Audio
Device
• Touch the + soft-key located to the right of the device
name,
Uconnect™ Phone will automatically connect to the • The options pop-up will be displayed,
highest priority paired phone and/or Audio Device
• Touch the “Disconnect Device” soft-key,
within range. If you would need to choose a particular
phone or Audio Device follow these steps:
• Touch the X to exit out of the Settings screen.
• Touch the “Settings” soft-key,
Deleting A Phone Or Audio Device
• Touch the “Phone/Bluetootht” soft-key,
• Touch the “Settings” soft-key,
• Touch to select the particular Phone or the “Paired • Touch the Phone/Bluetootht soft-key,
Audio Sources” soft-key and then an Audio Device,
• Touch the + soft-key located to the right of the device
• Touch the X to exit out of the Settings screen.
name for a different Phone or Audio Device than the
currently connected device,
Disconnecting A Phone or Audio Device
• Touch the “Settings” soft-key,
• The options pop-up will be displayed,
• Touch the “Phone/Bluetootht” soft-key,
• Touch the “Delete Device” soft-key,
• Touch the X to exit out of the Settings screen.
Uconnect™ ACCESS USER’S MANUAL
Making A Phone Or Audio Device A Favorite
• Touch the “Settings” soft-key,
• Touch the “Phone/Bluetootht” soft-key,
• Touch the + soft-key located to the right of the device
name,
71
phonebook. Specific Bluetootht Phones with Phone Book
Access Profile may support this feature. See Uconnect™
website for supported phones.
• To call a name from a downloaded mobile phonebook,
follow the procedure in “Call by Saying a Name”
section.
• The options pop-up will be displayed,
• Automatic download and update, if supported, begins
as soon as the Bluetootht wireless phone connection is
• Touch the “Make Favorite” soft-key; you will see the
made to the Uconnect™ Phone, for example, after you
chosen device move to the top of the list,
start the vehicle.
• Touch the X to exit out of the Settings screen.
• A maximum of 1000 entries per phone will be downPhonebook Download — Automatic Phonebook
loaded and updated every time a phone is connected
Transfer From Mobile Phone
to the Uconnect™ Phone.
If equipped and specifically supported by your phone, • Depending on the maximum number of entries downUconnect™ Phone automatically downloads names (text
loaded, there may be a short delay before the latest
names) and number entries from the mobile phone’s
72 Uconnect™ ACCESS USER’S MANUAL
downloaded names can be used. Until then, if avail- 2. After loading the mobile phonebook, select phonebook from the Phone main screen, then select the
able, the previously downloaded phonebook is availappropriate number. Touch the + next to the selected
able for use.
number to display the options pop-up. In the pop-up
• Only the phonebook of the currently connected mobile
select “Add to Favorites”.
phone is accessible.
NOTE: If the Favorites list is full, you will be asked to
• This downloaded phonebook cannot be edited or
remove an existing favorite.
deleted on the Uconnect™ Phone. These can only be
edited on the mobile phone. The changes are trans- 3. From the Phone main screen, select phonebook. From
the phonebook screen, select the “Favorites” soft-key
ferred and updated to Uconnect™ Phone on the next
and then select the + soft-key located to the right of the
phone connection.
phonebook record. Select an empty entry and touch
Managing Your Favorite Phonebook
the + on that selected entry. When the Options pop-up
There are three ways you can add an entry to your
appears, touch “Add from Mobile”. You will then be
Favorite Phonebook.
asked which contact and number to choose from your
mobile phonebook. When complete the new favorite
1. During an active call of a number to make a favorite,
will be shown.
touch and hold a favorite button on the top of the
phone main screen.
Uconnect™ ACCESS USER’S MANUAL
73
For example, if your mobile service plan provides threeway calling, this feature can be accessed through the
To remove a Favorite, select phonebook from the
Uconnect™ Phone. Check with your mobile service proPhone main screen.
vider for the features that you have.
Next select Favorites on the left side of the screen and
Ways To Initiate A Phone Call
then touch the + Options soft-key.
Listed below are all the ways you can initiate a phone call
Touch the + next to the Favorite you would like to with Uconnect™ Phone.
remove.
• Redial
The Options pop-up will display, touch “Remove from
• Dial by touching in the number
Favs”.
To Remove A Favorite
•
•
•
•
Phone Call Features
• Voice Commands (Dial by Saying a Name, Call by
Saying a Phonebook Name, Redial, or Call Back)
The following features can be accessed through the
Uconnect™ Phone if the feature(s) are available and • Favorite Phonebook
supported by Bluetootht on your mobile service plan.
• Mobile Phonebook
• Recent Call Log
• SMS Message Viewer
74 Uconnect™ ACCESS USER’S MANUAL
NOTE: All of the above operations except Redial can be Call Controls
done with 1 call or less active.
The touch-screen allows you to control the following call
features:
Dial By Saying A Number
• Press the
button to begin,
• Answer
• After the “Listening” prompt and the following beep, •
say “Dial 248-555-1212”,
•
• The Uconnect™ Phone will dial the number 248-555- •
1212.
•
Call By Saying A Phonebook Name
•
button to begin,
• Press the
•
• After the “Listening” prompt and the following beep,
•
say “Call John Doe Mobile”,
• The Uconnect™ Phone will dial the number associated
with John Doe, or if there are multiple numbers it will
ask which number you want to call for John Doe.
End
Ignore
Hold/unhold
Mute/unmute
Transfer the call to/from the phone
Swap 2 active calls
Join 2 active calls together
Uconnect™ ACCESS USER’S MANUAL
75
Touch-Tone Number Entry
• Missed Calls
• Touch the “Phone” soft-key,
• All Calls
• Touch the “Dial” soft-key,
These can be accessed by touching the “recent calls”
soft-key on the Phone main screen.
• The Touch-Tone screen will be displayed,
button and say “Show my
You can also press the
• Use the numbered soft-keys to enter the number and
incoming calls” from any screen and the Incoming calls
touch “Call”.
will be displayed.
To send a touch tone using Voice Recognition (VR), press
You can also press the
button and say “Show my
the
button while in a call and say “Send 1234#” or
recent calls” from any screen and the All calls screen will
you can say “Send Voicemail Password” if Voicemail
be displayed.
password is stored in your mobile phonebook.
NOTE: Incoming can also be replaced with “Outgoing”,
Recent Calls
“Recent” or “Missed”.
You may browse up to 34 of the most recent of each of the
following call types:
• Incoming Calls
• Outgoing Calls
76 Uconnect™ ACCESS USER’S MANUAL
NOTE: The Uconnect™ Phone compatible phones in the
market today do not support rejecting an incoming call
When you receive a call on your mobile phone, the when another call is in progress. Therefore, the user can
Uconnect™ Phone will interrupt the vehicle audio sys- only answer an incoming call or ignore it.
tem, if on, and will ask if you would like to answer the Making A Second Call While Current Call Is In
call. Press the
button to accept the call. To ignore the Progress
call, touch the “Ignore” soft-key on the touch-screen. You
To make a second call while you are currently on a call,
can also touch the “answer” soft-key or touch the caller
press the
button and say “Dial” or “Call” followed
ID box.
by the phone number or phonebook entry you wish to
call. The first call will be on hold while the second call is
Answer Or Ignore An Incoming Call — Call Currently
in progress. Or you can place a call on hold by touching
In Progress
the Hold soft-key on the Phone main screen, then dial a
If a call is currently in progress and you have another
number from the dialpad, recent calls, SMS Inbox or from
incoming call, you will hear the same network tones for
the phonebooks. To go back to the first call, refer to
call waiting that you normally hear when using your
“Toggling Between Calls” in this section. To combine two
button, answer softmobile phone. Press the phone
calls, refer to “Join Calls” in this section.
key or caller ID box to place the current call on hold and
answer the incoming call.
Answer Or Ignore An Incoming Call — No Call
Currently In Progress
Uconnect™ ACCESS USER’S MANUAL
77
terminated and if there is a call on hold, it will become
the new active call. If the active call is terminated by the
During an active call, touch the “Hold” soft-key on the
far end, a call on hold may not become active automatiPhone main screen.
cally. This is cell phone-dependent.
Toggling Between Calls
Redial
If two calls are in progress (one active and one on hold),
touch the “Swap” soft-key on the Phone main screen. • Press the “Redial” soft-key,
Only one call can be placed on hold at a time.
• or press the
and after the “Listening” prompt and
the
following
beep,
say “Redial”,
button to toggle between the
You can also press the
Place/Retrieve A Call From Hold
active and held phone call.
Join Calls
• After the “Listening” prompt and the following beep,
say “Redial”,
When two calls are in progress (one active and one on • The Uconnect™ Phone will call the last number that
was dialed from your mobile phone.
hold), touch the “Join Calls” soft-key on the Phone main
screen to combine all calls into a Conference Call.
Call Continuation
Call Termination
Call continuation is the progression of a phone call on the
To end a call in progress, momentarily press the
but- Uconnect™ Phone after the vehicle ignition key has been
ton or the end soft-key. Only the active call(s) will be switched to OFF.
78 Uconnect™ ACCESS USER’S MANUAL
NOTE: The call will remain within the vehicle audio • The roadside assistance number dialed is based on the
system until the phone becomes out of range for the
country where the vehicle is purchased (1-800-528Bluetootht connection. It is recommended to press the
2069 for the U.S., 1-877-213-4525 for Canada, 55-143454 for Mexico City and 1-800-712-3040 for outside
“transfer” soft-key when leaving the vehicle.
Mexico City in Mexico). Please refer to the Chrysler
Uconnect™ Phone Features
Group LLC 24-Hour “Roadside Assistance” coverage
details in the Warranty Information Booklet and on the
Roadside Assistance
24–Hour Roadside Assistance Card.
If you need towing assistance:
Voice Mail Calling
button to begin.
• Press the
To learn how to access your voice mail, refer to “Working
• After the “Listening” prompt and the following beep,
with Automated Systems”.
say “Roadside Assistance”.
Working With Automated Systems
NOTE:
This method is used in instances where one generally has
• The roadside assistance call may also be initiated by to press numbers on the mobile phone keypad while
touch.
navigating through an automated telephone system.
You can use your Uconnect™ Phone to access a voice
mail system or an automated service, such as a paging
Uconnect™ ACCESS USER’S MANUAL
79
entries. For example, if you previously created a Phonebook entry with First and/or Last Name as “Voicemail
Password”, then if you press the
button and say
“Send Voicemail Password” the Uconnect™ Phone will
then send the corresponding phone number associated
When calling a number with your Uconnect™ Phone that
with the phonebook entry, as tones over the phone.
normally requires you to enter in a touch-tone sequence
on your mobile phone keypad, you can utilize the NOTE:
touch-screen or press the
button and say the word
• The first number encountered for that contact will be
“Send” then the sequence you wish to enter. For example,
sent. All other numbers entered for that contact will be
if required to enter your PIN followed with a pound, (3 7
ignored.
button and say, “Send 3 7 4
4 6 #), you can press the
6 #”. Saying “Send” followed by a number, or sequence of • You may not hear all of the tones due to mobile phone
numbers, is also to be used for navigating through an
network configurations. This is normal.
automated customer service center menu structure, and
• Some paging and voice mail systems have system time
to leave a number on a pager.
out settings that are too short and may not allow the
You can also send stored mobile phonebook entries as
use of this feature.
tones for fast and easy access to voice mail and pager
service or automated customer service line. Some services require immediate response selection. In some
instances, that may be too quick for use of the
Uconnect™ Phone.
80 Uconnect™ ACCESS USER’S MANUAL
• Pauses, wait or other characters that are supported by • Touch the “Display” soft-key, then scroll down to Voice
some phones are not supported over Bluetootht.
Response Length,
These additional symbols will be ignored in the dialing
• Select either “Brief” or “Detailed” by touching the box
a numbered sequence.
next to the selection. A check-mark will appear to
Barge In — Overriding Prompts
show your selection.
button can be used when you wish to skip part
The
of a prompt and issue your voice command immediately.
For example, if a prompt is asking “There are 2 numbers
with the name John. Say the full name” you could press
the
button and say, “John Smith” to select that
option without having to listen to the rest of the voice
prompt.
Voice Response Length
It is possible for you to choose between Brief and
Detailed Voice Response Length.
• Touch the “More” soft-key (where available), then
touch the “Settings” soft-key,
Phone And Network Status Indicators
Uconnect™ Phone will provide notification to inform
you of your phone and network status when you are
attempting to make a phone call using Uconnect™
Phone. The status is given for network signal strength
and phone battery strength.
Dialing Using The Mobile Phone Keypad
WARNING!
Your new vehicle has many features for the comfort
(Continued)
Uconnect™ ACCESS USER’S MANUAL
WARNING! (Continued)
and convenience of you and your passengers. Some
of these should not be used when driving because
they take your eyes from the road or your attention
from driving. Never dial using the mobile phone
keypad while driving.
You can dial a phone number with your mobile phone
keypad and still use the Uconnect™ Phone (while dialing
via the mobile phone keypad, the user must exercise
caution and take precautionary safety measures). By
dialing a number with your paired Bluetootht mobile
phone, the audio will be played through your vehicle’s
audio system. The Uconnect™ Phone will work the same
as if you dial the number using voice a command.
81
NOTE: Certain brands of mobile phones do not send the
dial ring to the Uconnect™ Phone to play it on the vehicle
audio system, so you will not hear it. Under this situation, after successfully dialing a number the user may feel
that the call did not go through even though the call is in
progress. Once your call is answered, you will hear the
audio.
Mute/Un-Mute (Mute ON/OFF)
When you mute the Uconnect™ Phone, you will still be
able to hear the conversation coming from the other
party, but the other party will not be able to hear you. In
order to mute the Uconnect™ Phone simply touch the
Mute button on the Phone main screen.
Advanced Phone Connectivity
Transfer Call To And From Mobile Phone
The Uconnect™ Phone allows ongoing calls to be transferred from your mobile phone to the Uconnect™ Phone
82 Uconnect™ ACCESS USER’S MANUAL
without terminating the call. To transfer an ongoing call • Always wait for the beep before speaking.
from your paired mobile phone to the Uconnect™ Phone
• Speak normally, without pausing, just as you would
or vice versa, press the Transfer button on the Phone
speak to a person sitting a few feet/meters away from
main screen.
you.
Connect Or Disconnect Link Between The Uconnect™
• Make sure that no one other than you is speaking
Phone And Mobile Phone
during a voice command period.
If you would like to connect or disconnect the Bluetootht
connection between a Uconnect™ Phone paired mobile • Performance is maximized under:
• low-to-medium blower setting,
phone and the Uconnect™ Phone, follow the instructions
• low-to-medium vehicle speed,
described in your mobile phone User’s Manual.
• low road noise,
Things You Should Know About Your Uconnect™
• smooth road surface,
Phone
• fully closed windows,
Voice Command
• dry weather condition.
• For best performance, adjust the rearview mirror to
• Even though the system is designed for users speaking
provide at least ½ in (1 cm) gap between the overhead
in North American English, French, and Spanish acconsole (if equipped) and the mirror.
cents, the system may not always work for some.
Uconnect™ ACCESS USER’S MANUAL
• When navigating through an automated system such
as voice mail, or when sending a page, before speaking
the digit string, make sure to say “Send”.
• It is recommended that you do not store names in your
favorites phonebook while the vehicle is in motion.
83
• low-to-medium vehicle speed,
• low road noise,
• smooth road surface,
• fully closed windows,
• dry weather conditions, and
• operation from the driver’s seat.
• Phonebook (Mobile and Favorites) name recognition
rate is optimized when the entries are not similar.
• Performance, such as audio clarity, echo, and loudness
to a large degree rely on the phone and network, and
• You can say “O” (letter “O”) for “0” (zero).
not the Uconnect™ Phone.
• Even though international dialing for most number
combinations is supported, some shortcut dialing • Echo at the far end can sometimes be reduced by
lowering the in-vehicle audio volume.
number combinations may not be supported.
• In a convertible vehicle, system performance may be • In a convertible vehicle, system performance may be
compromised with the convertible top down.
compromised with the convertible top down.
Far End Audio Performance
SMS
• Audio quality is maximized under:
• low-to-medium blower setting,
Uconnect™ Phone can read or send new messages on
your phone.
84 Uconnect™ ACCESS USER’S MANUAL
Your phone must support SMS over Bluetootht in order
to use this feature. If the Uconnect™ Phone determines
your phone is not compatible with SMS messaging over
Bluetootht the “Messaging” button will be greyed out
and the feature will not be available for use.
Send Messages Using Soft-Keys:
You can send messages using Uconnect™ Phone. To send
a new message:
• Touch the “Phone” soft-key,
NOTE: Uconnect™ Phone SMS is only available when • Touch the “messaging” soft-key then “New Message”,
the vehicle is not in moving.
• Touch one of the 18 preset messages and the person
Read Messages:
you wish to send the message to,
If you receive a new text message while your phone is • If multiple numbers are available for the contact select
connected to Uconnect™ Phone, an announcement will
which number you would like to have the message
sent,
be made to notify you that you have a new text message.
Once a message is received and viewed or listened to, • Press “Send” or “Cancel”.
you will have the following options:
Send Messages Using Voice Commands:
• Send a Reply
• Press the
button,
• Forward
• After the “Listening” prompt and the following beep,
• Call
say “Send message to John Smith mobile”,
Uconnect™ ACCESS USER’S MANUAL
• After the system prompts you for what message you 7. I’m on my way.
want to send, say the message you wish to send or say
8. Thanks.
“List”. There are 18 preset messages.
9. I’ll be late.
While the list of defined messages are being read, you can
interrupt the system by pressing the
button and 10. I will be  minutes late.
saying the message you want to send.
11. See you in  minutes.
After the system confirms that you want to send your
12. Stuck in traffic.
message to John Smith, your message will be sent.
13. Start without me.
List of Preset Messages:
14. Where are you?
1. Yes.
15. Are you there yet?
2. No.
16. I need directions.
3. Okay.
17. I’m lost.
4. I can’t talk right now.
18. See you later.
5. Call me.
6. I’ll call you later.
85
86 Uconnect™ ACCESS USER’S MANUAL
Bluetootht Communication Link
Mobile phones have been found to lose connection to the
Uconnect™ Phone. When this happens, the connection
can generally be reestablished by switching the phone
OFF/ON. Your mobile phone is recommended to remain
in Bluetootht ON mode.
Power-Up
After switching the ignition key from OFF to either the
ON or ACC position, or after a language change, you
must wait at least 15 seconds prior to using the system.
Uconnect™ ACCESS USER’S MANUAL
87
Voice Tree
88 Uconnect™ ACCESS USER’S MANUAL
• Send dial tones for automated systems is available
while a call is active. This is an example that uses a
You can replace “John Smith” with any name in your
Phonebook Record named “Voicemail Password.”
mobile or favorite phone book. You can also say “Send
a message to John Smith” and the system will ask you • Storing Dial tones in contact names is possible but only
the first number encountered in a contact name will be
which phone number you want to send a message to
sent. For example if there is a number stored in the
for John Smith.
Home and Work numbers for the contact “Voicemail
You can replace “Mobile” with “Home”, “Work” or
password” only the Home number will be sent
“Other”.
• If your phone does not support phonebook download
You can replace “Incoming Calls” with “Outgoing
or call log download over Bluetooth than these comCalls” or “Missed Calls”.
mands will return a response that the contact does not
exist in the phonebook.
You can replace “248 555 1212” with any phone
number supported by your Mobile phone.
• Emergency and Towing assistance are contacts that
have been pre-loaded in the phonebooks. Commands
These commands can be used during a phone call after
such as “Call Emergency” and “Call Towing Assispushing the Uconnect™ Voice Command button on
tance” will call the corresponding number stored with
the steering wheel. Please note the call will be muted
those contacts.
while the VR session is active.
NOTE:
•
•
•
•
•
Uconnect™ ACCESS USER’S MANUAL
NOTE: Available Voice Commands are shown in bold
face and underlined in the gray shaded boxes.
89
90 Uconnect™ ACCESS USER’S MANUAL
Uconnect™ ACCESS USER’S MANUAL
NOTE:
91
• You can replace “4” with any message number shown
on the screen.
• You can replace “John Smith” with any name in your
mobile or favorite phone book. You can also say “Send • If your phone does not support phonebook download
a message to John Smith” and the system will ask you
or call log download over Bluetooth than these comwhich phone number you want to send a message to
mands will return a response that the contact does not
for John Smith.
exist in the phonebook.
• You can replace “Mobile” with “Home”, “Work” or
“Other”.
• You can replace “Incoming Calls” with “Outgoing
Calls” or “Missed Calls”.
• Messaging commands only work if the Uconnect system is equipped with this feature and the mobile
phone supports messaging over Bluetooth.
• You can replace “248 555 1212” with any phone
number supported by your Mobile phone.
92 Uconnect™ ACCESS USER’S MANUAL
Uconnect™ ACCESS USER’S MANUAL
93
NOTE: Available Voice Commands are shown in bold Uconnect™ Voice Command
face and underlined in the gray shaded boxes.
Voice Command Overview
General Information
This device complies with Part 15 of the FCC rules and
RSS 210 of Industry Canada. Operation is subject to the
following conditions:
The Uconnect™ Voice Command system allows you to control your AM, FM radio, satellite radio, disc player, SD Card, USB/iPod and
Sirius Travel Link.
• Changes or modifications not expressly approved by
the party responsible for compliance could void the NOTE: Take care to speak into the Voice Command
user’s authority to operate the equipment.
system as calmly and normally as possible. The ability of
the Voice Command system to recognize user voice
• This device may not cause harmful interference.
commands may be negatively affected by rapid speaking
• This device must accept any interference received, or a raised voice level.
including interference that may cause undesired operation.
WARNING!
ALWAYS drive safely with your hands on the wheel.
You have full responsibility and assume all risks
(Continued)
94 Uconnect™ ACCESS USER’S MANUAL
WARNING! (Continued)
related to the use of the Uconnect™ features and
applications in this vehicle. Only use Uconnect™
when it is safe to do so. Failure to do so may result in
an accident involving serious injury or death.
what can be said based on the context you are in. After
three consecutive failures of a spoken command the VR
session with end.
Pressing the Uconnect™ Voice Command
button
while the system is speaking is known as “barging in.”
The system will be interrupted, and after the beep, you
When you press the Uconnect™ Voice Command can say a command. This will become helpful once you
button, you will hear a beep. The beep is your signal start to learn the options.
to give a command.
NOTE: At any time, you can say the words “Cancel” or
If no command is spoken the system will say one of two “Help”.
responses:
These commands are universal and can be used from any
menu. All other commands can be used depending upon
• I didn’t understand
the active application.
• I didn’t get that, etc.,
When using this system, you should speak clearly and at
If a command is not spoken a second time, the system
a normal speaking volume.
will respond with an error and give some direction as
Uconnect™ ACCESS USER’S MANUAL
95
The system will best recognize your speech if the win- Smith”. For multiple inputs in the same phrase or sendows are closed, and the heater/air conditioning fan is tence, the system identifies the topic or context and
set to low.
provides the associated follow-up prompt such as “Who
do you want to call?” in the case where a phone call was
At any point, if the system does not recognize one of your
requested but the specific name was not recognized.
commands, you will be prompted to repeat it.
The system utilizes continuous dialog; when the system
To hear available commands, press the Uconnect™ Voice
requires more information from the user it will ask a
Command
button and say “Help”. You will hear
question to which the user can respond without pressing
available commands for the screen displayed.
button.
the Uconnect™ Voice Command
Natural Speech
Uconnect™ Voice Commands
Natural speech allows the user to speak commands in
The Uconnect™ Voice Command system understands
phrases or complete sentences. The system filters out
two types of commands. Universal commands are availcertain non-word utterances and sounds such as “ah”
able at all times. Local commands are available if the
and “eh”. The system handles fill-in words such as “I
supported radio mode is active.
would like to”.
Start a dialogue by pressing the Uconnect™ Voice ComThe system handles multiple inputs in the same phrase
button.
mand
or sentence such as “make a phone call” and “to Kelly
96 Uconnect™ ACCESS USER’S MANUAL
Changing the Volume
Disc
1. Start a dialogue by pressing the Voice Command To switch to the disc mode, say “Change source to Disc”.
This command can be given in any mode or screen:
button.
2. Say a command (e.g., “Help”).
3. Use the ON/OFF VOLUME rotary knob to adjust the
volume to a comfortable level while the Voice Command system is speaking. Please note the volume
setting for Voice Command is different than the audio
system.
Starting Voice Recognition (VR) Session in
Radio/Player Modes
In this mode, you can say the following commands:
NOTE: The commands can be said on any screen when
a call is not active after pushing the Uconnect™ Voice
button.
Command
• “Track” (#) (to change the track)
Uconnect™ ACCESS USER’S MANUAL
97
Voice Tree
98 Uconnect™ ACCESS USER’S MANUAL
NOTE:
1. You can replace “950 AM” with any other AM or FM
frequency, such as “98.7 FM”.
2. You can replace “80’s on 8” with any other satellite
station name received by the radio.
3. You can replace “8” with any other satellite station
named received by the radio.
4. You can replace “rock” with any of the satellite music
types.
NOTE: Available Voice Commands are shown in bold
face and shaded grey.
Uconnect™ ACCESS USER’S MANUAL
99
100 Uconnect™ ACCESS USER’S MANUAL
NOTE:
1. You can replace the album, artist, song, genre, playlist,
podcast and audio book names with any corresponding names on the current device that is playing.
2. You can replace “8” with any track on the CD that is
currently playing. Command is only available when
CD is playing.
3. Playlist, Podcast and audio book commands are only
available when the iPod is connected and playing.
4. VR commands, Albums, Artists, and Genre names are
based on the music database provided by Gracenote.
NOTE: Available Voice Commands are shown in bold
face and shaded grey.
Uconnect™ ACCESS USER’S MANUAL
101
102 Uconnect™ ACCESS USER’S MANUAL
NOTE:
1. You can replace “NFL” with any league shown on the
sports league screen. For example you can say “Show
MLB headlines” or “Show PGA headlines”.
2. You can replace “Headlines” with any menu items
shown on a league screen. For example you can say
“Show NFL Schedule and results” or “Show NCAA
Basketball AP top 25” or “Show Major League Baseball
Teams”.
3. You can also say “Show Current Weather” or “Show
extended weather” or “Show five day forecast” or
“Show ski info” to get other forecasts.
NOTE: Available Voice Commands are shown in bold
face and shaded grey.
Uconnect™ ACCESS USER’S MANUAL
103
104 Uconnect™ ACCESS USER’S MANUAL
NOTE:
1. Only available with Navigation equipped vehicles.
2. You can replace “Player” with “Radio”, “Navigation”,
“Phone”, “Climate”, “More” or “Settings”.
3. Navigation commands only work if equipped with
Navigation.
NOTE: Available Voice Commands are shown in bold
face and shaded grey.
Uconnect™ ACCESS USER’S MANUAL
105
106 Uconnect™ ACCESS USER’S MANUAL
NOTE:
Getting Started
1. You can also say “Find City”, “Find Favorite”, “Find To access the Navigation system, touch the Nav soft-key
Play by Category”, “Find Play by Name”, “Find on bottom of the screen.
Recently Found”, “Where to?” or “Go Home”.
2. You can say “Find Nearest” then “Restaurant”, “Fuel”,
“Transit”, “Lodging”, “Shopping”, “Bank”, “Entertainment”, “Recreation”, “Attractions”, “Community”, “Auto Services”, “Hospitals”, “Parking”, “Airport”, “Police Stations”, “Fire Stations”, or “Auto
Dealers”.
NOTE: Available Voice Commands are shown in bold
face and shaded grey.
Navigation
Navigation Registration (Uconnect™ 8.4A Only)
Uconnect™ 8.4A is a Navigation-ready system, see your
authorized dealer for details
Uconnect™ ACCESS USER’S MANUAL
Main Menu
• Touch Emergency to search for Hospitals, Police and
Fire Stations near your current location. You can also
display your current location and save any Emergency
facility location to your Favorites.
• Touch Stop to stop a route.
• Touch Detour to detour a route.
Where To?
• Touch Where To? to find or route to a destination.
• Touch View Map to view the map.
• Touch Information to view Traffic, Where Am I? and
Trip Computer information
107
108 Uconnect™ ACCESS USER’S MANUAL
Touch this soft-key to search by a street address or a street
name with house number.
• Recent
Touch this soft-key to access previously routed addresses
or locations.
• Point of Interest
Touch this soft-key when you want to route to a point of
interest. The Point of Interest database allows you to
select a destination from a list of locations and public
places, or points of interest (POI).
From the Nav Main Menu, touch the Where To? soft-key • Favorites
and select one of the following methods to program a
Touch this soft-key to access previously saved addresses
route guidance.
or locations.
NOTE: Refer to the individual section of the chosen
• Intersection
option for further information.
• Address
Touch this soft-key to enter in two street names as a
destination.
Uconnect™ ACCESS USER’S MANUAL
109
Touch this soft-key to route to a particular city. The
navigation system will calculate a route with the destiTouch this soft-key to program or confirm a route to the
nation at the center of the city.
saved home address.
• Closest City
• GEO Coordinates
Touch this soft-key to route to a nearby city. The navigaTouch this soft-key to route to a GEO Coordinate. A geo
tion system will calculate a route with the destination at
coordinate is a coordinate used in geography. You can
the center of the nearby city.
determine a geo coordinate with the help of a handheld
• Phone Number
GPS receiver, a map, or the navigation system.
• Go Home
• Point on Map
Touch this soft-key to route to a location or point of
interest by the phone number.
Touch this soft-key to select a destination directly from
the Map screen. By selecting a street segment or icon, you NOTE: You can touch the back arrow soft-key to return
can quickly enter a destination without the need to input to the previous screen or the X soft-key to exit.
the city name or street.
Where To? – Address
• City Center
To enter a destination by Address, follow these steps:
110 Uconnect™ ACCESS USER’S MANUAL
1. While in the Nav Main Menu, touch the Where To? NOTE: To change the state and/or country, touch the
soft-key and then touch the Address soft-key.
state, country soft-key and follow the prompts to change
the state and/or country.
Uconnect™ ACCESS USER’S MANUAL
111
select/touch the desired street name in the correct city
and then you will have to enter the house number
3. Once the correct City, Street and Number has been
entered, you will be asked to confirm your destination
by touching OK.
4. Touch the Yes soft-key to confirm your destination and
begin your route.
2. Touch Spell City or Spell Street to begin entering the
address of your destination.
If you touch Spell City, you will have to enter and
select/touch the desired city name, followed by the
desired street name and lastly the house number.
If you touch Spell Street, you will have to enter and
112 Uconnect™ ACCESS USER’S MANUAL
You can touch the back arrow soft-key to return to the
previous screen or the X soft-key to exit.
Where To? – Recent
NOTE: If you are currently on a route guidance and you
select an Address, the system will ask you to choose one
of the following:
• Cancel previous route
• Add as first destination
• Add as last destination
To route to a recent destination, touch the Recent soft-key
in the NAV Main Menu.
Uconnect™ ACCESS USER’S MANUAL
113
Touch the soft-key with the name of the desired destina- To display the options for a destination touch the Options
tion. Confirm the route with Yes to start the route soft-key that looks like a gear.
guidance.
The following Options are available for each destination:
To delete a destination from the list, touch the trash can
• Edit Name
icon soft-key.
• Add Phone Number
114 Uconnect™ ACCESS USER’S MANUAL
• Move Up in the list
• Move Down in the list
• Place Pin on the location (saves the spot on the list)
NOTE: You can touch the back arrow soft-key to return
to the previous screen or the X soft-key to exit.
Where To? – Point of Interest
To enter a destination by Point of Interest (POI) touch the
Point of Interest soft-key in the Nav Main Menu.
The Point of Interest database allows you to select a
destination from a list of locations and public places, or
points of interest (POI)s.
Uconnect™ ACCESS USER’S MANUAL
115
• All POIs
• Spell POI Name
You can also change your POI search area, by touching
the Change Search Area soft-key. You will have the
following options to change your search area:
You have the following POIs to choose from:
• Gas Stations
• Restaurants
• Hotels/Motels
• ATM/Banking
• Around Me
116 Uconnect™ ACCESS USER’S MANUAL
• In a City
• Near Destination (only available during route
guidance)
• Along Route (only available during route guidance)
NOTE: You can touch the back arrow soft-key to return
to the previous screen or the X soft-key to exit.
POI – Gas Stations
To select a Gas Station POI, touch Point of Interest from
the Nav Main Menu, then touch the Point of Interest
soft-key and then touch the Gas Stations soft-key.
You can search for a gas station by the following categories, which are soft-key tabs at the top of the screen.
• Name
• Distance
• Type
Uconnect™ ACCESS USER’S MANUAL
• ABC (Search)
117
You can search for a restaurants by the following categories, which are soft-key tabs at the top of the screen.
Touch the desired Gas Station and touch Yes to confirm
• Name
the destination.
NOTE: If you are currently on a route guidance and you • Distance
select a gas station, the system will ask you to choose one
• Type
of the following:
• ABC (Search)
• Cancel previous route
Touch the desired Restaurant and touch Yes to confirm
• Add as first destination
the destination.
• Add as last destination
NOTE: If you are currently on a route guidance and you
You can touch the back arrow soft-key to return to the select a Restaurant, the system will ask you to choose one
of the following:
previous screen or the X soft-key to exit.
POI – Restaurants
• Cancel previous route
To select a Restaurant POI, touch Point of Interest from • Add as first destination
the Nav Main Menu, then touch the Point of Interest
• Add as last destination
soft-key and then touch the Restaurants soft-key.
118 Uconnect™ ACCESS USER’S MANUAL
You can touch the back arrow soft-key to return to the NOTE: If you are currently on a route guidance and you
select a Hotel or Motel, the system will ask you to choose
previous screen or the X soft-key to exit.
one of the following:
POI – Hotels/Motels
• Cancel previous route
To select a Hotel or Motel POI, touch Point of Interest
from the Nav Main Menu, then touch the Point of Interest • Add as first destination
soft-key and then touch the Hotels/Motels soft-key.
• Add as last destination
You can search for a hotel or motel by the following
You can touch the back arrow soft-key to return to the
categories, which are soft-key tabs at the top of the
previous screen or the X soft-key to exit.
screen.
POI – ATM/Banking
• Name
To select an ATM or Bank POI, touch Point of Interest
• Distance
from the Nav Main Menu, then touch the Point of Interest
soft-key and then touch the ATM/Banking soft-key.
• Type
You can search for an ATM or Bank by the following
categories, which are soft-key tabs at the top of the
Touch the desired hotel or motel and touch Yes to confirm
screen.
the destination.
• ABC (Search)
Uconnect™ ACCESS USER’S MANUAL
• Name
119
All POIs
• Distance
• Type
• ABC (Search)
Touch the desired ATM or Bank and touch Yes to confirm
the destination.
NOTE: If you are currently on a route guidance and you
select an ATM or Bank POI, the system will ask you to
choose one of the following:
• Cancel previous route
• Add as first destination
• Add as last destination
To select a POI type, touch Point of Interest from the Nav
Main Menu, then touch the Point of Interest soft-key and
then touch All POIs soft-key.
You can touch the back arrow soft-key to return to the
previous screen or the X soft-key to exit.
You can search through the available POI categories to
find your desired POI.
120 Uconnect™ ACCESS USER’S MANUAL
The available categories are:
• Recreation
• ATM/Banking
• Restaurants
• Automotive
• Shopping
• Coffee Shops
• Travel
• Community
• Truck
• Entertainment
Select a category and then select a subcategory if necessary. Touch the ABC soft-key to activate a keyboard with
Alphabetic characters in order to search within the POI
categories.
• Gas Stations
• Health and Beauty
• Highway Exit
• Hospital
Touch the desired POI and touch Yes to confirm the
destination.
• Other
NOTE: If you are currently on a route guidance and you
select a POI, the system will ask you to choose one of the
following:
• Parking
• Cancel previous route
• Hotels/Motels
Uconnect™ ACCESS USER’S MANUAL
• Add as first destination
• Cancel previous route
• Add as last destination
• Add as first destination
121
You can touch the back arrow soft-key to return to the • Add as last destination
previous screen or the X soft-key to exit.
You can touch the back arrow soft-key to return to the
POI – Spell Name
previous screen or the X soft-key to exit.
To search for a specific POI, touch Point of Interest from Where To? – Favorite Destinations
the Nav Main Menu, then touch the Point of Interest
To route to a favorite destination, touch the Favorites
soft-key and then touch the Spell Name soft-key.
soft-key in the NAV Main Menu.
A keyboard will appear on the screen. Type in the POI
that you want to search and touch the List soft-key to
display available items.
Touch the desired POI and touch Yes to confirm the
destination.
NOTE: If you are currently on a route guidance and you
select a POI, the system will ask you to choose one of the
following:
122 Uconnect™ ACCESS USER’S MANUAL
To save a favorite destination, touch the Add Favorite
soft-key and follow the steps to route a destination.
To display the options for a favorite destination touch the
Options soft-key that looks like a gear.
The following Options are available for each favorite
destination:
• Edit Name
• Add Phone Number
NOTE: If you are currently on a route guidance and you
select a Favorite, the system will ask you to choose one of
Touch the soft-key with the name of the desired favorite
the following
destination and confirm the route with Yes to start the
route guidance.
• Cancel previous route
To delete a destination from the list, touch the trash can • Add as first destination
icon soft-key.
• Add as last destination
Uconnect™ ACCESS USER’S MANUAL
123
You can touch the back arrow soft-key to return to the
previous screen or the X soft-key to exit.
Where To? – Intersection
To enter a destination by Intersection, follow these steps:
This menu shows the default country and state setting.
NOTE: To change the state and/or country, touch the
state, country soft-key and follow the prompts to change
the state and/or country.
1. While in the Nav Main Menu, touch the Where To?
soft-key and then touch the Intersection soft-key.
124 Uconnect™ ACCESS USER’S MANUAL
select/touch the desired street name in the correct city
and then you will have to enter the intersecting street.
3. Once the correct City and Intersection has been entered, you will be asked to confirm your destination.
4. Touch the Yes soft-key to confirm your destination and
begin your route.
NOTE: If you are currently on a route guidance and you
select a Intersection, the system will ask you to choose
one of the following:
• Cancel previous route
2. This menu shows the default country and state set• Add as first destination
tings.
If you touch Spell City, you will have to enter and • Add as last destination
select/touch the desired city name, followed by the You can touch the back arrow soft-key to return to the
desired street name and lastly you will have to enter previous screen or the X soft-key to exit.
the intersection street.
If you touch Spell Street, you will have to enter and
Uconnect™ ACCESS USER’S MANUAL
Where To? – Go Home
To enter your Home Address, follow these steps:
125
2. To set your set your Home Address choose one of the
following options:
NOTE: Refer to the individual section of the chosen
option for further information.
• Address
• Recent
• Point of Interest
• Favorites
• Intersection
• GEO Coordinates
• Point on Map
• City Center
• Closest Cities
1. While in the Nav Main Menu, touch the Where To?
• Phone Number
soft-key and then touch the Go Home soft-key. If there
is no Home Address entered, touch Yes to enter it now. 3. Once you have generated your Home Address, you
will be asked to Save it.
126 Uconnect™ ACCESS USER’S MANUAL
4. Touch the Save soft-key to confirm your destination NOTE: You can touch the back arrow soft-key to return
and begin the route to your Home Address.
to the previous screen or the X soft-key to exit.
5. This address will be saved as your Home Address and Where To? – Trips
it can be accessed by touching the Go Home soft-key
in the Where To? Menu.
Change/Delete Your Home Address
To change or delete your current Home Address perform
the following:
1. Touch the Go Home soft-key in the Where To? Menu
2. Touch the Options soft-key at the bottom of the
displayed map.
3. Touch Clear Home and then touch Yes to clear/delete
your Home Address.
4. To enter in a new Home Address, follow the Where To route to a saved Trip, touch the Recent soft-key in the
To? – Go Home procedure.
NAV Main Menu.
Uconnect™ ACCESS USER’S MANUAL
Touch the soft-key with the name of the desired Trip and
touch the first destination in the list. Confirm the route by
touching Yes to start the route guidance.
To add a Trip, follow these steps:
1. Touch the Create new Trip soft-key.
2. Type in the new Trip Name.
127
• Intersection
• GEO Coordinates
• Point on Map
• City Center
• Closest Cities
• Phone Number
5. Add more needed destinations to your trip.
3. Touch Add Destination to add destinations to your
NOTE: Each destination will be listed in order, with the
trip.
last destination being the final destination.
4. Choose from the following options to add a destina6. Your new Trip will appear on the Trips list.
tion
NOTE: Refer to the individual section of the chosen To delete a Trip from the list, touch the trash can icon
soft-key.
option for further information.
• Address
To display the options for a trip touch the Options
• Recent
soft-key that looks like a gear.
• Point of Interest
The following Options are available for each trip:
• Favorites
128 Uconnect™ ACCESS USER’S MANUAL
• Edit Name
• Move Up in the list
• Move Down in the list
NOTE: You can touch the back arrow soft-key to return
to the previous screen or the X soft-key to exit.
Where To? – GEO Coordinate
To enter a destination by GEO Coordinate, touch Where
To? in the Nav Main Menu and then touch the GEO
Coordinate soft-key.
Uconnect™ ACCESS USER’S MANUAL
129
3. Enter the Longitude by typing in the numbers. Use the
left and right arrows to select specific numbers in the
location shown.
NOTE: Touch the Format soft-key to change the format
of the Latitude/Longitude entry.
4. Touch OK to confirm the destination.
5. Touch the Yes soft-key to confirm your destination and
begin your route.
NOTE: If you are currently on a route guidance and you
select a Geo Coordinate, the system will ask you to
1. Enter the Latitude by typing in the numbers. Use the choose one of the following:
left and right arrows to select specific numbers in the
• Cancel previous route
location shown.
• Add as first destination
2. Touch the OK soft-key.
• Add as last destination
130 Uconnect™ ACCESS USER’S MANUAL
You can touch the back arrow soft-key to return to the
previous screen or the X soft-key to exit.
Where To? – Point on Map
1. Use the touch-screen to drag the center of the cross
over the desired destination.
2. Either touch the address bar at the top center of the
screen to confirm your location or touch the Details
soft-key in the upper right corner to display the
To enter a destination by Point on Map, touch Where To?
available locations near that point on the map.
in the Nav Main Menu and then touch the Point on Map
soft-key.
Uconnect™ ACCESS USER’S MANUAL
131
3. Touch the Yes soft-key to confirm your destination and
begin your route.
NOTE: If you are currently on a route guidance and you
select a Point on Map, the system will ask you to choose
one of the following:
• Cancel previous route
• Add as first destination
• Add as last destination
You can touch the back arrow soft-key to return to the
previous screen or the X soft-key to exit.
Where To? – City Center
To enter a destination by City Center, touch Where To? in
the Nav Main Menu and then touch the City Center
soft-key.
1. Enter the name of the City you would like to route to.
2. Touch the desired city from the list.
132 Uconnect™ ACCESS USER’S MANUAL
3. Touch the Yes soft-key to confirm your destination and
begin your route.
NOTE: If you are currently on a route guidance and you
select a City Center, the system will ask you to choose one
of the following:
• Cancel previous route
• Add as first destination
• Add as last destination
You can touch the back arrow soft-key to return to the
previous screen or the X soft-key to exit.
Where To? – Closest City
To enter a destination by Closest City, touch Where To? in
the Nav Main Menu and then touch the Closest City
soft-key.
Uconnect™ ACCESS USER’S MANUAL
133
• Cancel previous route
• Add as first destination
• Add as last destination
You can touch the back arrow soft-key to return to the
previous screen or the X soft-key to exit.
Where To? – Phone
1. Touch the desired city from the list.
2. Touch the Yes soft-key to confirm your destination and
begin your route.
NOTE: If you are currently on a route guidance and you
select a Closest City, the system will ask you to choose
one of the following:
134 Uconnect™ ACCESS USER’S MANUAL
3. Touch the Yes soft-key to confirm your destination and
begin your route.
NOTE: If you are currently on a route guidance and you
select a Phone number destination, the system will ask
you to choose one of the following:
• Cancel previous route
• Add as first destination
• Add as last destination
You can touch the back arrow soft-key to return to the
previous screen or the X soft-key to exit.
To enter a destination by Phone number, touch Where To?
in the Nav Main Menu and then touch the Phone Before Route Guidance
Number soft-key.
Before confirming the route with the Yes soft-key, it is
1. Enter the Phone Number of the destination you would possible to select options different from the default route
settings.
like to route to.
2. Touch the desired destination from the list.
Uconnect™ ACCESS USER’S MANUAL
135
• Options – Touch the Options soft-key to display a list • Avoid – Touch the Avoid soft-key to choose road types
to avoid during your route. To make a selection touch
of options to alter your route. To make a selection
and release the desired setting until a check-mark
touch and release the desired setting until a checkappears.
mark appears.
NOTE: Since toll roads, tunnels and ferries are built for
the purpose of shortening travel distances, avoiding
these road types may increase distance and travel time.
136 Uconnect™ ACCESS USER’S MANUAL
• Save – Touch the Save soft-key to save the destination
as a Favorite.
Touch the Yes soft-key to confirm your destination and to
start your route guidance.
NOTE: You can touch the back arrow soft-key to return
to the previous screen or the X soft-key to exit.
View Map
Touch the View Map soft-key from the Nav Main Menu
to display a map of your current position.
With the map displayed you have the following features
available.
• Menu
Touch this soft-key to return to the Nav Main Menu.
Uconnect™ ACCESS USER’S MANUAL
137
Touch a turn in the displayed Turn List for the following
options:
Touch the Zoom In (+) or Zoom Out (–) soft-keys to
– Show on Map
change the zoom level. Roads with lower functional
– Avoid Street
classification are not shown in higher zoom levels. (E.g.
residential streets, lightly-traveled county roads.)
• Options (only during route guidance)
• Time of Arrival/Time to Destination/Distance (only
Touch the Options soft-key to display the following
during route guidance)
options. Touch the desired soft-key.
• Zoom In +/ Zoom Out –
Touch the soft-key in the upper right area of the screen to – 2D North Up/Map View 2D/ Map View 3D
the display items available. Touch the desired option
Touch this soft-key to scroll between the three viewing
soft-key.
options.
– Time of Arrival
– Settings
Touch this soft-key to view all the available settings.
– Time to Destination
See View Map – Settings for more information.
– Distance
– Repeat
• Turn List (only during route guidance)
Touch this soft-key to repeat the current voice prompt.
Touch the area in the upper center part of the screen that – Turn List
displays your next turn to see a Turn List for your current
route.
138 Uconnect™ ACCESS USER’S MANUAL
Touch this soft-key to view the turn list for the current View Map – Settings
route.
– Stop Guidance
Touch this soft-key to stop route guidance.
• Where Am I?
Touch the area in the lower center part of the screen that
displays your current location to view the Where Am I?
view.
Where Am I? displays the address and GEO Coordinates
of your current location.
– Touch the GPS soft-key to view the GPS information.
– Touch the Save soft-key to save the location in your With the Map displayed, touch the Options soft-key and
Favorites.
then touch the Settings soft-key. You can also access this
NOTE: You can touch the back arrow soft-key to return menu by touching the Settings soft-key in the lower right
of the Nav Main Menu.
to the previous screen or the X soft-key to exit.
The following Map Settings are available.
Uconnect™ ACCESS USER’S MANUAL
• Map Setup
139
– Imperial (mile/yard)
– Metric (meter)
Touch this soft-key to display items to customize how
your map is viewed. Settings – Map Setup for more • GPS
information.
Touch this soft-key to change the GPS display. Touch the
• Speed Limit
desired soft-key.
– Decimal
Touch this soft-key to turn on/off speed limit warning
– DMS
announcements and to enter a pre-defined speed limit for
your route.
– DM
• Guidance Options
• Copy device information to USB? (If Equipped)
Touch this soft-key to display items to customize your Touch this soft-key to copy your radio information to a
route guidance. Settings – Guidance Options for more USB jump drive through the available USB port.
information.
Settings – Map Setup
• Units
Touch this soft-key to change the units display. Touch the
desired soft-key.
– U.S. (mile/feet)
140 Uconnect™ ACCESS USER’S MANUAL
Touch this soft-key to change how the Map View is
displayed. Touch the desired soft-key.
– 3D
– 2D
• Orientation
Touch this soft-key to change how the Map Orientation is
displayed. Touch the desired soft-key.
– North Up
– Heading Up
• Current Street
With the Map displayed, touch the Options soft-key, then
touch the Settings soft-key and then the Map Setup
soft-key. You can also access this menu by touching the
Settings soft-key in the lower right of the Nav Main
Menu.
The following Map Setup options are available.
• Map View
Touch this soft-key to turn on/off the current street
display on the lower center of the Map View. Touch and
release the soft-key until a check-mark appears, showing
the setting has been selected.
• Destination Information
Uconnect™ ACCESS USER’S MANUAL
Touch this soft-key to change the Destination Information
that is displayed in the upper right corner of the Map
View. Touch the desired soft-key.
– Time of Arrival
– Time to Destination
– Distance
141
Touch this soft-key to change the vehicle icon that is
displayed while in Map View. Touch Previous or Next to
view the available icons. Touch the back icon soft-key
when you’ve made you selection.
• Show POI Icons
Touch this soft-key to show the selected Point of Interest
icons while in Map View. Touch and release the soft-key
until a check-mark appears, showing the setting has been
Touch this soft-key to change how the AutoZoom feature
selected.
adjust the zoom level during guidance in Map View.
• POI Icon List
Touch the desired soft-key.
• AutoZoom
–
–
–
–
Far
Normal
Near
Off
• Vehicle Icon
Touch this soft-key to display the available Point of
Interest icons you would like displayed while in Map
View. Touch and release the desired selection soft-key
until a check-mark appears, showing the setting has been
selected.
• TMC Incidents
142 Uconnect™ ACCESS USER’S MANUAL
Touch this soft-key to show Traffic Message Channel • Digital Terrain Model
(TMC) Incidents while in Map View. Touch and release
Touch this soft-key to display the areas terrain while in
the soft-key until a check-mark appears, showing the
Map View. Touch and release the soft-key until a checksetting has been selected.
mark appears, showing the setting has been selected.
• Speed and Flow
• Park Areas
Touch this soft-key to show the Speed and Flow of traffic
Touch this soft-key to display Park Areas while in Map
while in Map View. Touch and release the soft-key until
View. Touch and release the soft-key until a check-mark
a check-mark appears, showing the setting has been
appears, showing the setting has been selected.
selected.
• Railroads
• 3D City Models
Touch this soft-key to display Railroad tracks while in
Touch this soft-key to display 3D city models while in
Map View. Touch and release the soft-key until a checkMap View. Touch and release the soft-key until a checkmark appears, showing the setting has been selected.
mark appears, showing the setting has been selected.
• City Areas
• 3D Landmarks
Touch this soft-key to display City Areas while in Map
Touch this soft-key to display 3D landmarks while in
View. Touch and release the soft-key until a check-mark
Map View. Touch and release the soft-key until a checkappears, showing the setting has been selected.
mark appears, showing the setting has been selected.
Uconnect™ ACCESS USER’S MANUAL
143
Touch this soft-key to enable Voice Guidance Prompts
during route guidance. Touch and release the soft-key
Touch this soft-key to display River Names while in Map
until a check-mark appears, showing the setting has been
View. Touch and release the soft-key until a check-mark
selected.
appears, showing the setting has been selected.
• Nav Volume Adjustment
NOTE: You can touch the back arrow soft-key to return
Touch the (+) or (-) soft-key to adjust the Nav Voice
to the previous screen or the X soft-key to exit.
Prompt Volume.
Settings – Guidance
• Lane Recommendation
With the Map displayed, touch the Options soft-key, then
touch the Settings soft-key and then the Guidance soft- Touch this soft-key to enable Lane Recommendation
key. You can also access this menu by touching the during route guidance. Touch and release the soft-key
Settings soft-key in the lower right of the Nav Main until a check-mark appears, showing the setting has been
selected.
Menu.
• River Names
The following Guidance options are available.
• Junction View
• Play Voice Guidance Prompts
Touch this soft-key to enable Junction View during route
guidance. Touch and release the soft-key until a checkmark appears, showing the setting has been selected.
144 Uconnect™ ACCESS USER’S MANUAL
displayed while in route guidance. Touch and release the
desired selection soft-key until a check-mark appears,
Touch this soft-key to enable navigation turn-by-turn
showing the setting has been selected.
displayed in vehicles cluster during route guidance.
Touch and release the soft-key until a check-mark ap- NOTE: You can touch the back arrow soft-key to return
pears, showing the setting has been selected.
to the previous screen or the X soft-key to exit.
• Navigation Turn-by-Turn Displayed in Cluster
• TMC Route Mode
Touch this soft-key to change how the Traffic Message
Channel (TMC) Route Mode functions during route
guidance. Touch the desired soft-key.
– Automatic
– By Delay Time
– Manual
– Off
• TMC Avoidance Types
Touch this soft-key to display the available Traffic Message Channel (TMC) Avoidance Types you would like
Information
Uconnect™ ACCESS USER’S MANUAL
145
NOTE: You can touch the back arrow soft-key to return
to the previous screen or the X soft-key to exit.
Information – Where Am I?
From the Nav Main Menu, touch the Information softkey and select one of the following options to view
additional information.
• Traffic
• Where Am I?
• Trip Computer
To select Where Am I? information, touch the Information soft-key from the Nav Main Menu and then touch
the Where Am I? soft-key.
146 Uconnect™ ACCESS USER’S MANUAL
Where Am I? displays the address and GEO Coordinates
of your current location.
• Touch the GPS soft-key to view the GPS information.
• Touch the Save soft-key to save the location in your
Favorites.
NOTE: You can touch the back arrow soft-key to return
to the previous screen or the X soft-key to exit.
Information – Trip Computer
To select Trip Computer information, touch the Information soft-key from the Nav Main Menu and then touch
the Trip Computer soft-key.
Trip Computer displays the following trip information
from your last trip
• Travel Direction
Uconnect™ ACCESS USER’S MANUAL
147
• Distance to final Destination
• Vehicle Speed
• Distance Traveled
• Overall average speed
• Moving average speed
• Maximum speed reached
• Total time traveled
• Travel time spent moving
• Travel time spent stopped
From the Nav Main Menu, touch the Emergency soft-key
NOTE: You can touch the back arrow soft-key to return and touch one of the following options to search and
to the previous screen or the X soft-key to exit.
route to a specific location.
Emergency
• Hospital – Search and route to a Hospital close to your
current location
• Police – Search and route to a Police Station close to
your current location
148 Uconnect™ ACCESS USER’S MANUAL
• Fire Department – Search and route a Fire Department
close to your current location
Touch the Location soft-key to display your exact current
location.
Touch the Save soft-key to save your current location in
Favorites.
NOTE: You can touch the back arrow soft-key to return
to the previous screen or the X soft-key to exit.
Emergency – Hospital
To search for a Hospital close to your current location,
touch Emergency from the Nav Main Menu and then
touch the Hospital soft-key.
You can search for a Hospital by the following categories,
which are soft-key tabs at the top of the screen.
• Name
Uconnect™ ACCESS USER’S MANUAL
• Distance
149
Emergency – Police
• ABC (Search)
NOTE: In case of emergency, please contact the facility
to verify their availability before proceeding.
Touch the desired Hospital and touch Yes to confirm the
destination.
NOTE:
• If you are currently on a route guidance and you select
a Hospital the system will ask you to choose one of the
following
• Cancel previous route
• Add as first destination
To search for a Police Station close to your current
• Add as last destination
location, touch Emergency from the Nav Main Menu and
• You can touch the back arrow soft-key to return to the then touch the Police Station soft-key.
previous screen or the X soft-key to exit.
150 Uconnect™ ACCESS USER’S MANUAL
You can search for a Police Station by the following • Add as last destination
categories, which are soft-key tabs at the top of the
You can touch the back arrow soft-key to return to the
screen.
previous screen or the X soft-key to exit.
• Name
• Distance
• ABC (Search)
NOTE: In case of emergency, please contact the facility
to verify their availability before proceeding.
Touch the desired Police Station and touch Yes to confirm
the destination.
NOTE: If you are currently on a route guidance and you
select a Police Station the system will ask you to choose
one of the following
• Cancel previous route
• Add as first destination
Uconnect™ ACCESS USER’S MANUAL
Emergency – Fire Department
151
You can search for a Fire Department by the following
categories, which are soft-key tabs at the top of the
screen.
• Name
• Distance
• ABC (Search)
NOTE: In case of emergency, please contact the facility
to verify their availability before proceeding.
Touch the desired Fire Department and touch Yes to
confirm the destination.
NOTE: If you are currently on a route guidance and you
To search for a Fire Department close to your current select a Fire Department the system will ask you to
location, touch Emergency from the Nav Main Menu and choose one of the following
then touch the Fire Department soft-key.
• Cancel previous route
• Add as first destination
152 Uconnect™ ACCESS USER’S MANUAL
• Add as last destination
costs, you are responsible for them. If Roadside Assistance is provided to your vehicle, you agree to be
You can touch the back arrow soft-key to return to the
responsible for any additional roadside assistance service
previous screen or the X soft-key to exit.
costs that you may incur.
Security Features
In order to provide Uconnect™ Services to you, we may
The following Security Related options are available:
record and monitor your conversations with Roadside
Assistance, Uconnect™ Care or Vehicle Care, whether
• 9–1–1 Call
such conversations are initiated through the Uconnect™
• Roadside Assistance Call
Services in your vehicle, or via a landline or mobile
telephone, and may share information obtained through
Roadside Assistance (If Equipped)
such recording and monitoring in accordance with reguIf your vehicle is equipped with this feature and within latory requirements. You acknowledge, agree and concellular range, you may be able to connect to Roadside sent to any recording, monitoring or sharing of informaAssistance, Uconnect™ Care and Vehicle Care by press- tion obtained through any such call recordings.
ing the “Assist” button on the Rearview Mirror of your
vehicle. To the extent any such calls incur additional
Uconnect™ ACCESS USER’S MANUAL
153
3. Once a connection between the vehicle and a 9-1-1
operator is made, the 9-1-1 Call system may transmit
The 9-1-1 Call system is an embedded phone system that
the following important vehicle information to a 9-1-1
allows you to connect to a 9-1-1 operator in an emeroperator:
gency. You can choose to press the 9-1-1 Call button on
• indication that the occupant placed a 9-1-1 Call;
the Rearview Mirror to contact a 9-1-1 operator.
• the vehicle brand; and
9–1–1 Call Operating Instructions
• the last known GPS coordinates of the vehicle.
1. Press the 9-1-1 Call button on the Rearview Mirror;
4. You should be able to speak with the 9-1-1 operator
NOTE: In case the 9-1-1 Call button is pushed in error,
through the vehicle audio system to determine if
there will be a 10 second delay before the 9-1-1 Call
additional help is needed.
system initiates a call to a 9-1-1 operator. To cancel the
9-1-1 Call connection, press the 9-1-1 Call button on the
Rearview Mirror or press the cancellation button on the
Phone Screen. Termination of the 9-1-1 Call will turn the
green LED light on the Rearview Mirror off.
9–1–1 Call – If Equipped
2. The LED light on the Rearview Mirror will turn green
once a connection to a 9-1-1 operator has been made;
154 Uconnect™ ACCESS USER’S MANUAL
NOTE: Once a connection is made between the vehicle’s 6. If a connection between the vehicle and a 9-1-1 operator is made, the 9-1-1 Call system may transmit certain
9-1-1 Call system and the 9-1-1 operator, the 9-1-1 operavehicle information to a 9-1-1 operator, including the
tor may be able to open a voice connection with the
last known GPS coordinates of your vehicle. If a
vehicle to determine if additional help is needed. Once
connection is made between a 9-1-1 operator and your
the 9-1-1 operator opens a voice connection with the
vehicle, you understand and agree that 9-1-1 operators
vehicle’s 9-1-1 Call system, the operator should be able to
may record conversations and sounds in your car
speak with you or other vehicle occupants and hear
upon connection and consent to such recordings. Your
sounds occurring in the vehicle. The vehicle’s 9-1-1 Call
vehicle MUST have a working electrical system for the
system will attempt to remain connected with the 9-1-1
9-1-1 Call system, among others, to operate. IF YOUR
operator until the 9-1-1 operator terminates the connecVEHICLE LOSES BATTERY POWER FOR ANY REAtion.
SON (INCLUDING DURING OR AFTER AN ACCI5. The 9-1-1 operator may attempt to contact appropriate
DENT) THE 9-1-1 CALL SYSTEM, AMONG OTHER
emergency responders and provide them with imporVEHICLES SYSTEMS, WILL NOT OPERATE.
tant vehicle information and GPS coordinates.
WARNING!
If anyone in the vehicle could be in danger (e.g., fire
(Continued)
Uconnect™ ACCESS USER’S MANUAL
WARNING! (Continued)
or smoke is visible, dangerous road conditions or
location), do not wait for voice contact from a 9-1-1
operator. All occupants should exit the vehicle immediately and move to a safe location.
WARNING!
The 9-1-1 Call system is embedded into the vehicle’s
electrical system. Do not add any aftermarket electrical equipment to the vehicle’s electrical system. This
may prevent your vehicle from sending a signal to
initiate an emergency call. To avoid interference that
can cause the 9-1-1 Call system to fail, never add
aftermarket equipment (e.g., two-way mobile radio,
CB radio, data recorder, etc.) to your vehicle’s electrical system or modify the antennas on your vehicle.
155
9-1-1 Call System Limitations
Vehicles sold in Canada and Mexico DO NOT have 9-1-1
Call system capabilities.
9-1-1 or other emergency line operators in Canada and
Mexico may not answer or respond to 9-1-1 system calls.
If the 9-1-1 Call system detects a malfunction, any of the
following may occur at the time the malfunction is
detected, and at the beginning of each ignition cycle:
• the Rearview Mirror light will continuously be illuminated red;
• The Phone Screen will display the following message
“Vehicle phone requires service. Please contact your
dealer.”; and,
• An In-Vehicle Audio message will state “Vehicle phone
requires service. Please contact your dealer.”
156 Uconnect™ ACCESS USER’S MANUAL
WARNING!
Ignoring the Rearview Mirror light could mean you
will not have 9-1-1 Call services. If the Rearview
Mirror light is illuminated, have an authorized
dealer service the 9-1-1 Call system immediately.
WARNING!
The ORC turns on the Air Bag Warning Light on the
instrument panel if a malfunction in any part of the
system is detected. If the Air Bag Warning Light is
illuminated, the 9-1-1 system may not be able to send
a signal to a 9-1-1 operator. If the Air Bag Warning
Light is illuminated, have an authorized dealer service the ORC system immediately.
Even if the 9-1-1 Call system is fully functional, factors
beyond Chrysler Group LLC’s control may prevent or
stop 9-1-1 Call system operation. These include, but are
not limited to, the following factors:
• The ignition key has been removed from the ignition
and the delayed accessories mode is active;
• The ignition key is in OFF position;
• The vehicle’s electrical systems are not intact;
• The 9-1-1 Call system software and/or hardware are
damaged during a crash;
• The vehicle battery loses power or becomes disconnected during a vehicle crash;
• Wireless and/or Global Positioning Satellite signals
are unavailable or obstructed;
• Equipment malfunction at the 9-1-1 operator facility;
Uconnect™ ACCESS USER’S MANUAL
• Operator error by the 9-1-1 operator;
• Wireless network congestion;
• Weather; and
• Buildings, structures, geographic terrain, or tunnels.
WARNING!
Never place anything on or near the vehicle’s wireless and GPS antennas. You could prevent wireless
and GPS signal reception, which can prevent your
vehicle from placing an emergency call. Wireless and
GPS signal reception is required for the 9-1-1 Call
system to function properly.
157
WARNING!
Failure to perform scheduled maintenance and regularly inspect your vehicle may result in vehicle damage and/or serious injury.
General Information
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may cause undesired operation.
Remote Service Features
If your vehicle is equipped with Remote Service Features,
for more information, refer to www.MoparOwnerConnect.com or call 855-792-4241.
158 Uconnect™ ACCESS USER’S MANUAL
Uconnect™ 8.4AN
Uconnect™ 8.4AN System
Touch the Radio soft-key to enter the Radio Mode. The
different tuner modes; AM, FM and SXM can be selected
by touching the corresponding soft-keys in the Radio
Mode.
2. Media
Touch the Media soft-key to access media sources such
as: Disc, USB Device and AUX as long as the requested
media is present.
3. Climate
Refer to Climate Controls in your vehicles Owner’s
Manual on the DVD for further details.
4. Nav
1. Radio
Touch the Nav soft-key to access the Navigation feature.
Refer to the Navigation section in this manual for further
details.
5. Phone
Uconnect™ ACCESS USER’S MANUAL
159
Touch the Phone soft-key to access the Uconnect™ Phone Press the BACK button to return to a previous menu or
feature.
screen.
6. Apps
10. SCREEN OFF
Touch the Apps soft-key to access Smartphone and Press the SCREEN OFF hard-key to turn the touch-screen
Connected vehicle options.
OFF. To turn the screen back ON, just touch the screen.
7. Settings
11. VOLUME & MUTE
Touch the Settings soft-key to display the list of available Rotate the rotary knob to adjust the Volume. Press the
settings. Refer to Understanding Your Instrument Panel Mute button to mute the system.
section in your vehicles Owner’s Manual on the DVD for
Radio Mode
further details.
The radio is equipped with the following modes:
8. ENTER/BROWSE & TUNE/SCROLL
• FM
Press the ENTER/BROWSE button to accept a highlighted selection on the screen. Rotate the TUNE/ • AM
SCROLL rotary knob to scroll through a list or tune a
• SiriusXM™ Satellite Radio (if equipped)
radio station.
9. BACK
160 Uconnect™ ACCESS USER’S MANUAL
Touch the RADIO Soft Key, bottom left corner, to enter
the Radio Mode. The different tuner modes; AM, FM, and
SAT, can then, be selected by touching the corresponding
soft-keys in the Radio mode.
Turn the rotary TUNE/SCROLL control knob clockwise
to increase or counterclockwise to decrease the radio
station frequency. Push the ENTER/BROWSE button to
choose a selection.
When touched, the green GO soft key allows the you to
commit an entry, at which time the radio will tune to the
Push the ON/OFF Volume control knob to turn on the
entered station or channel and close the Direct Tune
radio. Push the ON/OFF Volume control knob a second
Screen.
time to turn off the radio.
Screen Close
The electronic volume control turns continuously (360
degrees) in either direction, without stopping. Turning The Red X Soft key at the top right, provides a means to
the Volume control knob clockwise increases the volume, close the Direct Tune Screen. The Direct Tune Screen also
auto closes if no activity occurs within 10 seconds.
and counter-clockwise decreases it.
ON/OFF & Volume Control
When the audio system is turned on, the sound will be Seek and Direct Tune Functions
set at the same volume level as last played.
The Seek Up and Down functions are activated by
touching the double arrow soft-keys to the right and left
Tune/Scroll Control
of the radio station display, or by pressing the left
Steering Wheel Audio Control (if equipped) up or down.
Uconnect™ ACCESS USER’S MANUAL
161
Seek Up
Fast Seek Down
Touch and release the Seek Up soft-key to tune the radio
to the next listenable station or channel. During a Seek
Up function, if the radio reaches the starting station after
passing through the entire band two times, the radio will
stop at the station where it began.
Touch and hold the Seek Down soft-key to advance the
radio through the available stations or channel at a faster
rate, the radio stops at the next available station or
channel when the soft-key is released.
Fast Seek Up
Press the Tune soft-key located at the bottom of the radio
screen. The Direct Tune soft-key screen is available in
AM, FM, and SAT radio modes and can be used to direct
tune the radio to a desired station or channel.
Touch and hold the Seek Up soft-key to advance the radio
through the available stations or channels at a faster rate,
the radio stops at the next available station or channel
when the soft-key is released.
Direct Tune
Press the available number soft-key to begin selecting a
desired station. Once a number has been entered, any
numbers that are no longer possible (stations that cannot
Touch and release the Seek Down soft-key to tune the
be reached) will become deactivated / grayed out.
radio to the next listenable station or channel. During a
Seek Down function, if the radio reaches the starting Undo
station after passing through the entire band two times, You can backspace an entry by touching the bottom left
the radio will stop at the station where it began.
Undo soft key.
Seek Down
162 Uconnect™ ACCESS USER’S MANUAL
You can switch between the two radio presets by touching the arrow soft key located in the upper right of the
Once the last digit of a station has been entered, the
radio screen.
DIRECT TUNE screen will close and the system will
automatically tune to that station.
Browse in AM/FM
GO
The selected Station or Channel number is displayed in When in either AM or FM, the Browse Screen provides a
the Direct Tune text box.
means to edit the Presets List and is entered by touching
the browse soft key.
Setting Presets
The Presets are available for all Radio Modes, and are Scrolling Preset List
activated by touching any of the six Preset soft keys, Once in the Browse Presets screen, you can scroll the
located at the top of the screen.
preset list by rotation of the Tune Knob, or by touching
When you are receiving a station that you wish to the Up and Down arrow keys, located on the right of the
commit into memory, press and hold the desired num- screen.
bered soft-key for more that 2 seconds or until you hear Preset Selection from List
a confirmation beep.
A Preset can be selected by touching any of the listed
The Radio stores up to 12 presets in each of the Radio Presets, or by pressing the ENTER/BROWSE button on
modes. A set of 6 presets are visible at the top of the radio the Tune Knob to select the currently highlighted Preset.
screen.
Uconnect™ ACCESS USER’S MANUAL
163
When selected, the radio tunes to the station stored in the programming for children, directly from its satellites and
broadcasting studios. A one-year SiriusXM™ Satellite
Preset and returns to the main radio screen.
Radio subscription is included.
Deleting Presets
SiriusXM™ and all related marks and logos are tradeA Preset can be deleted in the Presets Browse screen by
marks of SiriusXM™ Radio Inc. and its subsidiaries.
touching the Trash Can Icon for the corresponding Preset.
SiriusXM™ Radio requires a subscription, sold separately after trial subscription included with vehicle purReturn to Main Radio Screen
chase. Prices and programming are provided by SiriYou can return to the Main Radio Screen, by touching the
usXM™ and are subject to change. Subscriptions
X soft key when in the Browse Presets screen.
governed by Terms & Conditions available at sirius.com/
serviceterms. SiriusXM™ Radio U.S. service only availSiriusXM™ Satellite Radio Mode
able to those at least 18 years of age in the 48 contiguous
SiriusXM™ Satellite radio uses direct satellite-to-receiver
United States, D.C., and PR. Service available in Canada;
broadcasting technology to provide clear digital sound,
see www.siriuscanada.ca.
coast to coast. The subscription service provider is SiriusXM™ Satellite Radio. This service offers over 130 This functionality is only available for radios equipped
channels of music, sports, news, entertainment, and with a Satellite receiver. In order to receive satellite radio,
the vehicle needs to be outside with a clear view to the
sky.
164 Uconnect™ ACCESS USER’S MANUAL
If the screen shows Acquiring Signal, you might have to When in Satellite mode:
change the vehicle’s position in order to receive a signal.
• The SAT button is highlighted blue.
In most cases, the satellite radio does not receive a signal
in underground parking garages or tunnels.
• The SiriusXM™ Presets are displayed at the top of the
screen.
No Subscription
• The Genre is displayed below the Presets Bar.
Radios equipped with a Satellite receiver, require a
subscription to the Sirius Service. When the Radio does • The SiriusXM™ Channel Number is displayed in the
not have the necessary subscription, the Radio is able to
center.
receive the Traffic/Weather channel only.
• The Program Information is displayed at the bottom of
the Channel Number.
Acquiring SiriusXM™ Subscription
To activate the Sirius subscription, call the toll free • The SiriusXM™ function soft-keys are displayed below the Program Information.
number on the Weather channel. You will need to provide the Sirius ID (SID) located at the bottom of the
Tuning is done by operating the Tune Knob or by Direct
Channel 0 screen.
Tune, similar to other Radio Bands, see Presets, browse,
The Satellite Mode is activated by a touch of the SAT Tune Knob, and Direct Tune.
soft-key.
Uconnect™ ACCESS USER’S MANUAL
165
In addition to the tuning Operation functions common to Touch the Pause or Play soft-key to pause playing of the
all Radio modes, the replay, Traffic/Weather Jump, and content at any time that the content is playing live or
fav soft-key functions are available in SiriusXM™ Mode. rewound content. Play can be resumed again by touching
of the Pause/Play soft-key.
Replay
Rewind
The replay function provides a means to store and replay
up to 22 minutes of music audio and 48 minutes of talk Touch the RW soft-key to rewind the content in steps of
radio. Once the channel is switched, content in replay 5 seconds. Touching the RW soft-key for more than 2
memory is lost
seconds rewinds the content. The Radio begins playing
Touch the replay soft-key. The play/pause, rewind/ the content at the point at which the touch is released.
forward and live soft-keys will display at the top of the Forward
screen, along with the replay time.
Each touch of the FW soft-key forwards the content in
You can exit by touching the replay soft-key, any time steps of 5 seconds. Forwarding of the content can only be
during the Replay mode.
done when the content is previously rewound, and
therefore, can not be done for live content. A continuous
Play/Pause
touch of the FW soft-key also forwards the content. The
Radio begins playing the content at the point at which the
touch is release.
166 Uconnect™ ACCESS USER’S MANUAL
Fav. Artist While the song is playing to set a Favorite
Artist, touch the fav. soft-key and then the Fav. Artist
Touch the Live soft-key to resume playing of Live consoft-key.
tent.
Fav. Song While the song is playing to set a Favorite
Favorites
Song, touch the fav. soft-key and then the Fav Song
Touch the fav. soft-key to activate the favorites menu, soft-key.
which will time out in 5 seconds in absence of user
Traffic & Weather
interaction.
Touch the Traffic & Weather soft-key to tune to a SiriYou can exit the Favorites Menu by a touch of the X in the
usXM™ Traffic and Weather channel. To set a Traffic &
top right corner.
Weather alert for any one of the cities in the Jump Browse
The favorites feature enables you to set a favorite artist, list, see Browse in SAT.
or song that is currently playing. The Radio then uses this
When the Traffic & Weather soft-key is touched, the
information to alert you when either the favorite song, or
Traffic & Weather channel is tuned.
favorite artist are being played at any time by any of the
If the Traffic & Weather alert City is not set, you are
SIRIUS Channels.
presented with a pop up to allow you to select the
The maximum number of favorites that can be stored in
favorite city using the Browse Screen.
the Radio is 50.
Live
Uconnect™ ACCESS USER’S MANUAL
Browse in SAT
167
Genre
Touch the browse soft-key to edit Presets, Favorites, Touch the Genre button to display a list of Genres. You
Game Zone, and Jump settings, along with providing the can select any desired Genre by touching the Genre list, at
SiriusXM™ Channel List.
which point, the Radio tunes to a channel with the
content in the selected Genre.
This Screen contains many sub menus. You can exit a sub
menu to get back to a parent menu by a touch of the Back Presets
Arrow.
Touch the Presets soft-key located at the left of the
All
Browse screen.
Touch the All soft-key at the left of the Browse Screen.
You can scroll the Presets list touching the up and down
arrows, located at the right side of the screen. Scrolling
Channel List
can also be done by operating the Tune/Scroll Knob as
Touch the Channel List to display all the SiriusXM™ well.
Channel Numbers along with the corresponding Genre.
Preset Selection
You can scroll the Channel list by touching the up and
down arrows, located on the right side of the screen. A Preset can be selected by touching any of the listed
Scrolling can also be done by operating the Tune/Scroll Presets, or by pressing the ENTER/BROWSE button on
Knob.
the Tune Knob to select the currently highlighted Preset.
168 Uconnect™ ACCESS USER’S MANUAL
When selected, the Radio tunes to the station stored in Remove Favorites
the Preset, and returns to the main Radio screen.
Touch the Remove Favorites tab at the top of the screen.
Touch the Delete All soft-key to delete all of the Favorites
Deleting a Preset
or touch the Trash Can icon next to the Favorite to be
A Preset can be deleted in the Presets Browse screen by
deleted.
touching the Trash Can Icon for the corresponding Preset.
Alert Settings
Favorites
Touch the Alert Setting tab at the top of the screen. The
Touch the Favorites soft-key, located at the left of the
Alert Settings menu allows you to choose from a Visual
Browse screen.
alert or Audible and Visual alert when one of your
The Favorites menu provides a means to Edit the Favor- favorites is airing on any of the SiriusXM™ channels.
ites list and to configure the Alert Settings, along with
Game Zone
providing a list of Channels currently airing any of the
Touch the Game Zone soft-key, located at the left of the
items in the Favorites list.
Browse screen. This feature provides you with the ability
You can scroll the Favorites list touching the up and
to select teams, edit the selection, and set alerts.
down arrows, located at the right side of the screen.
Scrolling can also be done by operating the Tune/Scroll On Air
Knob as well.
Uconnect™ ACCESS USER’S MANUAL
Touch the On-Air tab at the top of the screen. The On-Air
list provides a list of Channels currently airing any of the
items in the Selections list, and touching any of the items
in the list tunes the radio to that channel.
Select Teams
Touch the Select Teams soft-key to activate the League
Scroll list. Touch the chosen league and a scroll list of all
teams within the league will appear, then you can select
a team by touching the corresponding box. A check mark
appears for all teams that are chosen.
Remove Selection
Touch the Alert Setting tab at the top of the screen. The
Alert Settings menu allows you to choose from “Alert me
to on-air games upon start” or “Alert upon score update”
or both when one or more of your selections is airing on
any of the SiriusXM™ channels.
Audio
Touch of the Audio soft-key to activate the Audio settings
screen to adjust Balance\Fade, Equalizer, And Speed
Adjusted Volume.
You can return to the Radio screen by touching the X
located at the top right.
Touch the Remove Selection tab at the top of the screen. Balance/Fade
Touch the Delete All soft-key to delete all of the Selections
or touch the Trash Can icon next to the Selection to be
deleted.
Alert Settings
169
170 Uconnect™ ACCESS USER’S MANUAL
Equalizer
Touch the Balance/Fade soft-key to Balance audio between the front speakers or fade the audio between the Touch the Equalizer soft-key to activate the Equalizer
rear and front speakers.
screen.
Touching the Front, Rear, Left, or Right soft-keys or touch Touch the + or - soft-keys, or by touching and dragging
and drag the blue Speaker Icon to adjust the Balance/ over the level bar for each of the equalizer bands. The
Fade.
level value, which spans between ±9, is displayed at the
bottom of each of the Bands.
Uconnect™ ACCESS USER’S MANUAL
Speed Adjusted Volume
171
audio volume with variation to vehicle speed. Volume
increases automatically as speed increase to compensate
for normal road noise.
Surround System (If Equipped)
Touch the On soft-key to activate Surround Sound. Touch
Off to deactivate this feature.
When Surround Sound is On, you can hear audio coming
from every direction as in a movie theatre or home
theatre system.
Media Mode
OPERATING INSTRUCTIONS – DISC MODE
Touch the Speed Adjusted Volume soft-key to activate the
Overview
Speed Adjusted Volume screen.
The Speed Adjusted Volume is adjusted by touching of Disc Mode is entered by either inserting a Disc or touch
the + and - buttons or by touching, and dragging over the the Disc soft-key on the left side of the display. Once in
Level Bar This alters the automatic adjustment of the Media Mode, touch the source soft-key and select Disc.
172 Uconnect™ ACCESS USER’S MANUAL
A “No Disc” message will be displayed on the screen in which can be scrolled by touching the Up and Down
the Disc mode when a Disc is not present in the Radio. soft-keys to the right. The Scroll/Tune knob can also be
used to scroll.
Seek Up/Down
Source
Touch and release the right arrow soft-key for the next
selection on the Disc. Touch and release the left arrow Touch the Source soft-key to select the desired audio
soft-key to return to the beginning of the current selec- source, Disc, USB/iPodt, SD Card, AUX or Bluetootht.
tion, or return to the beginning of the previous selection This screen will time out after a few seconds and return
if the Disc is within the first second of the current to the main radio screen if no selection is made.
selection.
Repeat
Browse
Touch the repeat soft-key to toggle the repeat functionTouch the browse soft-key to display the browse window. ality. The Repeat soft-key is highlighted when active. The
The left side of the browse window displays a list of ways Radio will continue to play the current track, repeatedly,
you can browse through the contents of the Disc. If as long as the repeat is active.
supported by the device, you can browse by Folders,
Shuffle
Artists, Playlists, Albums, Songs, etc. Touch the desired
soft-key on the left side of the screen. The center of the
browse window shows items and it’s sub-functions,
Uconnect™ ACCESS USER’S MANUAL
173
Touch the shuffle soft-key to play the selections on the
compact disc in random order to provide an interesting
change of pace. Touch the soft-key a second time to turn
this feature off.
USB/iPodt Mode is entered by either inserting a USB
device or iPodt and cable into the USB Port or touch the
iPodt soft-key on the left side of the display. Once in
Media Mode, touch the source soft-key and select iPodt.
Info
Seek Up/Down
Touch the Info soft-key to display the current track Touch and release the right arrow soft-key for the next
information. Touch the Info soft-key a second time to selection on the USB device/iPodt. Touch and release the
left arrow soft-key to return to the beginning of the
cancel this feature.
current selection, or return to the beginning of the
Tracks
previous selection if the USB device/iPodt is within the
Touch the trks soft-key to display a pop up with the Song first second of the current selection.
List. The currently playing song is indicated by an arrow
Browse
and lines above and below the song title.
Touch the browse soft-key to display the browse window.
OPERATING INSTRUCTIONS – USB/iPodt
The left side of the browse window displays a list of ways
MODE
you can browse through the contents of the USB device/
Overview
iPodt. If supported by the device, you can browse by
Folders, Artists, Playlists, Albums, Songs, etc. Touch the
174 Uconnect™ ACCESS USER’S MANUAL
desired soft-key on the left side of the screen. The center
of the browse window shows items and it’s subfunctions, which can be scrolled by touching the Up and
Down soft-keys to the right. The Scroll/Tune knob can
also be used to scroll.
Source
Touch the shuffle soft-key to play the selections on the
USB/iPodt device in random order to provide an interesting change of pace. Touch the soft-key a second time to
turn this feature off.
Info
Touch the Info soft-key to display the current track
Touch the Source soft-key to select the desired audio information. Touch the Info soft-key a second time to
source, Disc, USB/iPodt, SD Card, AUX or Bluetootht. cancel this feature.
This screen will time out after a few seconds and return
Tracks
to the main radio screen if no selection is made.
Touch the trks soft-key to display a pop up with the Song
Repeat
List. The currently playing song is indicated by an arrow
Touch the repeat soft-key to toggle the repeat function- and lines above and below the song title. When in the
ality. The Repeat soft-key is highlighted when active. The Tracks List screen you can rotate the TUNE/SCROLL
Radio will continue to play the current track, repeatedly, knob to highlight a track (indicated by the line above and
below the track name) and then press the ENTER/
as long as the repeat is active.
BROWSE knob to start playing that track.
Shuffle
Uconnect™ ACCESS USER’S MANUAL
175
Touching the trks soft-key while the pop up is displayed Controlling the Auxiliary Device
will close the pop up.
The control of the auxiliary device (e.g., selecting playlists, play, fast forward, etc.) cannot be provided by the
Audio
radio; use the device controls instead. Adjust the volume
Refer to Radio Mode for adjusting the audio settings.
with the ON/OFF VOLUME rotary knob, or with the
volume of the attached device.
OPERATING INSTRUCTIONS – AUX MODE
Overview
NOTE: The vehicle radio unit is acting as the amplifier
for audio output from the Auxiliary device. Therefore if
AUX Mode is entered by inserting an AUX device using
the volume control on the Auxiliary device is set too low,
a cable with a 3.5 mm audio jack into the AUX port or
there will be insufficient audio signal for the radio unit to
touch the AUX soft-key on the left side of the display.
play the music on the device.
Once in Media Mode, touch the source soft-key and select
AUX.
Source
Inserting Auxiliary Device
Touch the Source soft-key to select the desired audio
source, Disc, USB/iPodt, SD Card, AUX or Bluetootht.
Gently insert the Auxiliary device cable into the AUX
This screen will time out after a few seconds and return
Port. If you insert an Auxiliary device with the ignition
to the main radio screen if no selection is made.
ON and the radio ON, the unit will switch to AUX mode
and begin to play when you insert the device cable.
Audio
176 Uconnect™ ACCESS USER’S MANUAL
Touch the browse soft-key to display the browse window.
The left side of the browse window displays a list of ways
OPERATING INSTRUCTIONS – SD CARD
you can browse through the contents of the SD Card. If
MODE
supported by the device, you can browse by Folders,
Overview
Artists, Playlists, Albums, Songs, etc. Touch the desired
soft-key on the left side of the screen. The center of the
SD Card Mode is entered by either inserting a SD Card
browse window shows items and it’s sub-functions,
into the USB Port or touch the SD Card soft-key on the
which can be scrolled by touching the Up and Down
left side of the display. Once in Media Mode, touch the
soft-keys to the right. The Scroll/Tune knob can also be
source soft-key and select SD Card.
used to scroll.
Seek Up/Down
Source
Touch and release the right arrow soft-key for the next
Touch the Source soft-key to select the desired audio
selection on the SD Card. Touch and release the left arrow
source, Disc, USB/iPodt, SD Card, AUX or Bluetootht.
soft-key to return to the beginning of the current selecThis screen will time out after a few seconds and return
tion, or return to the beginning of the previous selection
to the main radio screen if no selection is made.
if the SD Card is within the first second of the current
selection.
Repeat
Refer to Radio Mode for adjusting the audio settings.
Browse
Uconnect™ ACCESS USER’S MANUAL
Touch the repeat soft-key to toggle the repeat functionality. The Repeat soft-key is highlighted when active. The
Radio will continue to play the current track, repeatedly,
as long as the repeat is active.
Shuffle
177
and lines above and below the song title. When in the
Tracks List screen you can rotate the TUNE/SCROLL
knob to highlight a track (indicated by the line above and
below the track name) and then press the ENTER/
BROWSE knob to start playing that track.
Touching the trks soft-key while the pop up is displayed
Touch the shuffle soft-key to play the selections on the SD
will close the pop up.
Card device in random order to provide an interesting
change of pace. Touch the soft-key a second time to turn Audio
this feature off.
Refer to Radio Mode for adjusting the audio settings.
Info
OPERATING INSTRUCTIONS – Bluetootht
Touch the Info soft-key to display the current track MODE
information. Touch the Info soft-key a second time to Overview
cancel this feature.
Bluetootht Streaming Audio (BTSA) or Bluetootht Mode
Tracks
is entered by pairing a Bluetootht device, containing
Touch the trks soft-key to display a pop up with the Song music, to the Uconnect™ Access system.
List. The currently playing song is indicated by an arrow
178 Uconnect™ ACCESS USER’S MANUAL
Before proceeding, the Bluetootht device needs to be Touch the Source soft-key to select the desired audio
paired through Uconnect™ Phone in order to communi- source, Disc, USB/iPodt, SD Card, AUX or Bluetootht .
cate with the Uconnect™ Access System.
This screen will time out after a few seconds and return
to the main radio screen if no selection is made.
NOTE: See the pairing procedure in the Uconnect™
Tracks
Phone section for more details.
To access Bluetootht mode, touch the Bluetootht soft-key Touch the trks soft-key to display a pop up with the Song
List. The currently playing song is indicated by a blue
on the left side of the display.
arrow and lines above and below the song title.
Seek Up/Down
Touching the trks soft-key while the pop up is displayed
Touch and release the right arrow soft-key for the next
will close the pop up.
selection on the Bluetootht device. Touch and release the
left arrow soft-key to return to the beginning of the Audio
current selection, or return to the beginning of the
Refer to Radio Mode for adjusting the audio settings.
previous selection if the Bluetootht device is within the
first second of the current selection.
Source
Uconnect™ ACCESS USER’S MANUAL
Uconnect™ Phone
Uconnect Phone™ Overview
179
• Calling Back the last incoming call number (“Call
Back”).
• View Call logs on screen (“Show incoming calls”,
Uconnect™ Phone is a voice-activated, hands-free, in“Show Outgoing calls”, “Show missed Calls”, “Show
vehicle communications system. Uconnect™ Phone alRecent Calls”).
lows you to dial a phone number with your mobile
phone.
• Searching Contacts phone number (“Search for John
Smith Mobile”).
Uconnect™ Phone supports the following features:
Screen Activated Features
Voice Activated Features:
• Dialing via Keypad using touch-screen.
• Hands Free dialing via Voice (“Call John Smiths Mobile” or, “Dial 248 555-1212”).
• Viewing and Calling contacts from Phonebooks displayed on the touch-screen.
• Hands Free text to speech listening of your incoming
SMS messages.
• Setting Favorite Contact Phone numbers so the are
easily accessible on the Main Phone screen.
• Hands Free text messaging (“Send a message to John
Smiths Mobile”).
• Viewing and Calling contacts from Recent Call logs.
• Redialing last dialed numbers (“Redial”).
• Reviewing your recent Incoming SMS.
180 Uconnect™ ACCESS USER’S MANUAL
Uconnect™ Phone allows you to transfer calls between
the system and your mobile phone as you enter or exit
• Listen to Music on your Bluetootht Device via the
your vehicle and enables you to mute the system’s
touch-screen.
microphone for private conversation.
• Pairing up to 10 phones/audio devices for easy access
to connect to them quickly.
WARNING!
• Sending a text message via the touch-screen.
NOTE: Your phone must be capable of SMS messaging
via Bluetootht for messaging features to work properly.
Your mobile phone’s audio is transmitted through your
vehicle’s audio system; the system will automatically
mute your radio when using the Uconnect™ Phone.
Any voice commanded system should be used only
in safe driving conditions and all attention should be
kept on the roadway ahead. Failure to do so may
result in an accident causing serious injury or death.
The Uconnect™ Phone is driven through your
For Uconnect™ customer support, visit the following Bluetootht “Hands-Free Profile” mobile phone.
Uconnect™ features Bluetootht technology - the global
website:
standard that enables different electronic devices to con• www.UconnectPhone.com
nect to each other without wires or a docking station, so
Uconnect™ Phone works no matter where you stow your
• or call 1–877–855–8400
mobile phone (be it your purse, pocket, or briefcase), as
long as your phone is turned on and has been paired to
Uconnect™ ACCESS USER’S MANUAL
the vehicle’s Uconnect™ Phone. The Uconnect™ Phone
allows up to ten mobile phones or audio devices to be
linked to the system. Only one linked (or paired) mobile
phone and one audio device can be used with the system
at a time. The system is available in English, Spanish, or
French languages.
181
The
button is also used to access the Voice Commands for the Uconnect™ Voice Command features if
your vehicle is equipped. Please see the Uconnect™ Voice
Command section for direction on how to use the
button.
The Uconnect™ Phone is fully integrated with the vehicle’s audio system. The volume of the Uconnect™ Phone
can be adjusted either from the radio volume control
The Uconnect™ Phone
Button is used to get
knob or from the steering wheel radio control (right
into the phone mode and make calls, show
switch), if so equipped.
recent, incoming, outgoing calls, view phonebook etc., When you press the button you will Operation
hear a BEEP. The beep is your signal to give a command.
Voice commands can be used to operate the Uconnect™
Phone and to navigate through the Uconnect™ Phone
Uconnect™ Voice Command Button
menu structure. Voice commands are required after most
The Uconnect™ Voice Command
Button
Uconnect™ Phone prompts. There are two general methis only used for “barge in” and when you are
ods for how Voice Command works:
already in a call and you want to send Tones or
make another call.
Uconnect™ Phone Button
182 Uconnect™ ACCESS USER’S MANUAL
1. Say compound commands like “Call John Smith mobile”.
2. Say the individual commands and allow the system to
guide you to complete the task.
You will be prompted for a specific command and then
guided through the available options.
say each part of the command when you are asked for
it. For example, you can use the compound command
form voice command “Search for John Smith”, or you
can break the compound command form into two
voice commands: “Search Contact” and when asked
“John Smith”. Please remember, the Uconnect™ Phone
works best when you talk in a normal conversational
tone, as if speaking to someone sitting a few feet/
meters away from you.
• Prior to giving a voice command, one must wait for the
beep, which follows the “Listen” prompt or another
Natural Speech
prompt.
• For certain operations, compound commands can be
used. For example, instead of saying “Call” and then
“John Smith” and then “mobile”, the following compound command can be said: “Call John Smith
mobile”.
Your Uconnect™ Phone Voice system uses a Natural
Language Voice Recognition (VR) engine.
Natural speech allows the user to speak commands in
phrases or complete sentences. The system filters out
certain non-word utterances and sounds such as “ah”
• For each feature explanation in this section, only the and “eh”. The system handles fill-in words such as “I
compound command form of the voice command is would like to”.
given. You can also break the commands into parts and
Uconnect™ ACCESS USER’S MANUAL
The system handles multiple inputs in the same phrase
or sentence such as “make a phone call” and “to Kelly
Smith”. For multiple inputs in the same phrase or sentence, the system identifies the topic or context and
provides the associated follow-up prompt such as “Who
do you want to call?” in the case where a phone call was
requested but the specific name was not recognized.
183
To activate the Uconnect™ Phone from idle, simply press
the
button and say a command or say “help”. All
Uconnect™ Phone sessions begin with a press of the
button on the radio control head.
Cancel Command
At any prompt, after the beep, you can say “Cancel” and
you will be returned to the main menu.
The system utilizes continuous dialog; when the system
or
buttons when the
requires more information from the user it will ask a You can also press the
system
is
listening
for
command
and
be returned to the
question to which the user can respond without pressing
main
or
previous
menu.
the Voice Command
button.
Voice Command Tree
Refer to “Voice Tree” in this section.
Help Command
NOTE: Pressing the
or
buttons while the system
is playing is known as “Barging In”, refer to “Barge In —
Overriding Prompts” for further information.
Pair (Link) Uconnect™ Phone To A Mobile Phone
If you need assistance at any prompt, or if you want to
To begin using your Uconnect™ Phone, you must pair
know your options at any prompt, say “Help” following
your compatible Bluetootht enabled mobile phone.
the beep.
184 Uconnect™ ACCESS USER’S MANUAL
To complete the pairing process, you will need to reference your mobile phone Owner’s Manual. The
Uconnect™ website may also provide detailed instructions for pairing.
NOTE:
• You must have Bluetootht enabled on your phone to
complete this procedure.
• The vehicle must be in PARK.
1. Press the “Phone” soft-key on the screen to begin.
• If No is selected, touch the “Settings” soft-key from
the Uconnect™ Phone main screen,
• Touch the “Add Device” soft-key,
• Search for available devices on your Bluetootht
enabled mobile phone. When prompted on the
phone, enter the name and PIN shown on the
Uconnect Touch™ screen,
• See Step 4 to complete the process.
4. Uconnect™ Phone will display an in progress screen
while the system is connecting.
2. If there is no phone currently connected with the 5. When the pairing process has successfully completed,
the system will prompt you to choose whether or not
system, a pop-up will appear.
this is your favorite phone. Selecting Yes will make
3. Select Yes to begin the pairing process. Then, search
this phone the highest priority. This phone will take
for available devices on your Bluetootht enabled
precedence over other paired phones within range.
mobile phone. When prompted on the phone, enter
the name and PIN shown on the Uconnect Touch™
screen.
Uconnect™ ACCESS USER’S MANUAL
185
• Search for available devices on your Bluetootht enabled mobile phone. When prompted on the phone,
• Touch the “Settings” soft-key from the Phone main
enter the name and PIN shown on the Uconnect
screen,
Touch™ screen,
• Next, touch the “Phone/Bluetootht” soft-key,
• Uconnect™ Phone will display an in process screen
while the system is connecting,
Pair Additional Mobile Phones
• When the pairing process has successfully completed,
the system will prompt you to choose whether or not
this is your favorite phone. Selecting Yes will make this
phone the highest priority. This phone will take precedence over other paired phones within range.
NOTE: For phones which are not made a favorite, the
phone priority is determined by the order in which it was
paired. The latest phone paired will have the higher
priority.
• Touch the “Add Device” soft-key,
You can also use the following VR commands to bring up
the Paired Phone screen from any screen on the radio:
186 Uconnect™ ACCESS USER’S MANUAL
• “Show Paired Phones” or
• “Connect My Phone”
Pair A Bluetootht Streaming Audio Device
• Touch the “Player” or “Media” soft-key to begin,
• Change the Source to Bluetootht,
• Uconnect™ Phone will display an in process screen
while the system is connecting,
• When the pairing process has successfully completed,
the system will prompt you to choose whether or not
this is your favorite device. Selecting Yes will make
this device the highest priority. This device will take
precedence over other paired devices within range.
• Touch the “Bluetootht” soft-key to display the Paired
NOTE: For devices which are not made a favorite, the
Audio Devices screen,
device priority is determined by the order in which it was
paired. The latest device paired will have the higher
• Touch the “Add Device” soft-key,
priority.
NOTE: If there is no device currently connected with the
You can also use the following VR command to bring up
system, a pop-up will appear.
a list of paired audio devices.
• Search for available devices on your Bluetootht enabled audio device. When prompted on the device, • “Show Paired Audio Devices”
enter the name and PIN shown on the Uconnect
Touch™ screen,
Uconnect™ ACCESS USER’S MANUAL
Connecting To A Particular Mobile Phone Or Audio
Device
187
• Touch the + soft-key located to the right of the device
name,
Uconnect™ Phone will automatically connect to the • The options pop-up will be displayed,
highest priority paired phone and/or Audio Device
• Touch the “Disconnect Device” soft-key,
within range. If you would need to choose a particular
phone or Audio Device follow these steps:
• Touch the X to exit out of the Settings screen.
• Touch the “Settings” soft-key,
Deleting A Phone Or Audio Device
• Touch the “Phone/Bluetootht” soft-key,
• Touch the “Settings” soft-key,
• Touch to select the particular Phone or the “Paired • Touch the Phone/Bluetootht soft-key,
Audio Sources” soft-key and then an Audio Device,
• Touch the + soft-key located to the right of the device
• Touch the X to exit out of the Settings screen.
name for a different Phone or Audio Device than the
currently connected device,
Disconnecting A Phone or Audio Device
• The options pop-up will be displayed,
• Touch the “Settings” soft-key,
• Touch the “Phone/Bluetootht” soft-key,
• Touch the “Delete Device” soft-key,
• Touch the X to exit out of the Settings screen.
188 Uconnect™ ACCESS USER’S MANUAL
Making A Phone Or Audio Device A Favorite
• Touch the “Settings” soft-key,
• Touch the “Phone/Bluetootht” soft-key,
• Touch the + soft-key located to the right of the device
name,
phonebook. Specific Bluetootht Phones with Phone Book
Access Profile may support this feature. See Uconnect™
website for supported phones.
• To call a name from a downloaded mobile phonebook,
follow the procedure in “Call by Saying a Name”
section.
• Automatic download and update, if supported, begins
as soon as the Bluetootht wireless phone connection is
• Touch the “Make Favorite” soft-key; you will see the
made to the Uconnect™ Phone, for example, after you
chosen device move to the top of the list,
start the vehicle.
• Touch the X to exit out of the Settings screen.
• A maximum of 1000 entries per phone will be downloaded and updated every time a phone is connected
Phonebook Download — Automatic Phonebook
to the Uconnect™ Phone.
Transfer From Mobile Phone
• The options pop-up will be displayed,
If equipped and specifically supported by your phone, • Depending on the maximum number of entries downUconnect™ Phone automatically downloads names (text
loaded, there may be a short delay before the latest
names) and number entries from the mobile phone’s
Uconnect™ ACCESS USER’S MANUAL
189
downloaded names can be used. Until then, if avail- 2. After loading the mobile phonebook, select phonebook from the Phone main screen, then select the
able, the previously downloaded phonebook is availappropriate number. Touch the + next to the selected
able for use.
number to display the options pop-up. In the pop-up
• Only the phonebook of the currently connected mobile
select “Add to Favorites”.
phone is accessible.
NOTE: If the Favorites list is full, you will be asked to
• This downloaded phonebook cannot be edited or
remove an existing favorite.
deleted on the Uconnect™ Phone. These can only be
edited on the mobile phone. The changes are trans- 3. From the Phone main screen, select phonebook. From
the phonebook screen, select the “Favorites” soft-key
ferred and updated to Uconnect™ Phone on the next
and then select the + soft-key located to the right of the
phone connection.
phonebook record. Select an empty entry and touch
Managing Your Favorite Phonebook
the + on that selected entry. When the Options pop-up
There are three ways you can add an entry to your
appears, touch “Add from Mobile”. You will then be
Favorite Phonebook.
asked which contact and number to choose from your
mobile phonebook. When complete the new favorite
1. During an active call of a number to make a favorite,
will be shown.
touch and hold a favorite button on the top of the
phone main screen.
190 Uconnect™ ACCESS USER’S MANUAL
For example, if your mobile service plan provides threeway calling, this feature can be accessed through the
To remove a Favorite, select phonebook from the
Uconnect™ Phone. Check with your mobile service proPhone main screen.
vider for the features that you have.
Next select Favorites on the left side of the screen and
Ways To Initiate A Phone Call
then touch the + Options soft-key.
Listed below are all the ways you can initiate a phone call
Touch the + next to the Favorite you would like to with Uconnect™ Phone.
remove.
• Redial
The Options pop-up will display, touch “Remove from
• Dial by touching in the number
Favs”.
To Remove A Favorite
•
•
•
•
Phone Call Features
• Voice Commands (Dial by Saying a Name, Call by
Saying a Phonebook Name, Redial, or Call Back)
The following features can be accessed through the
Uconnect™ Phone if the feature(s) are available and • Favorite Phonebook
supported by Bluetootht on your mobile service plan.
• Mobile Phonebook
• Recent Call Log
• SMS Message Viewer
Uconnect™ ACCESS USER’S MANUAL
191
NOTE: All of the above operations except Redial can be Call Controls
done with 1 call or less active.
The touch-screen allows you to control the following call
features:
Dial By Saying A Number
• Press the
button to begin,
• Answer
• After the “Listening” prompt and the following beep, •
say “Dial 248-555-1212”,
•
• The Uconnect™ Phone will dial the number 248-555- •
1212.
•
Call By Saying A Phonebook Name
•
button to begin,
• Press the
•
• After the “Listening” prompt and the following beep,
•
say “Call John Doe Mobile”,
• The Uconnect™ Phone will dial the number associated
with John Doe, or if there are multiple numbers it will
ask which number you want to call for John Doe.
End
Ignore
Hold/unhold
Mute/unmute
Transfer the call to/from the phone
Swap 2 active calls
Join 2 active calls together
192 Uconnect™ ACCESS USER’S MANUAL
Touch-Tone Number Entry
• Missed Calls
• Touch the “Phone” soft-key,
• All Calls
• Touch the “Dial” soft-key,
These can be accessed by touching the “recent calls”
soft-key on the Phone main screen.
• The Touch-Tone screen will be displayed,
button and say “Show my
You can also press the
• Use the numbered soft-keys to enter the number and
incoming calls” from any screen and the Incoming calls
touch “Call”.
will be displayed.
To send a touch tone using Voice Recognition (VR), press
You can also press the
button and say “Show my
the
button while in a call and say “Send 1234#” or
recent
calls”
from
any
screen
and the All calls screen will
you can say “Send Voicemail Password” if Voicemail
be displayed.
password is stored in your mobile phonebook.
NOTE: Incoming can also be replaced with “Outgoing”,
Recent Calls
“Recent” or “Missed”.
You may browse up to 34 of the most recent of each of the
following call types:
• Incoming Calls
• Outgoing Calls
Uconnect™ ACCESS USER’S MANUAL
193
NOTE: The Uconnect™ Phone compatible phones in the
market today do not support rejecting an incoming call
When you receive a call on your mobile phone, the when another call is in progress. Therefore, the user can
Uconnect™ Phone will interrupt the vehicle audio sys- only answer an incoming call or ignore it.
tem, if on, and will ask if you would like to answer the Making A Second Call While Current Call Is In
call. Press the
button to accept the call. To ignore the Progress
call, touch the “Ignore” soft-key on the touch-screen. You
To make a second call while you are currently on a call,
can also touch the “answer” soft-key or touch the caller
button and say “Dial” or “Call” followed
press the
ID box.
by the phone number or phonebook entry you wish to
Answer Or Ignore An Incoming Call — Call Currently
call. The first call will be on hold while the second call is
In Progress
in progress. Or you can place a call on hold by touching
If a call is currently in progress and you have another the Hold soft-key on the Phone main screen, then dial a
number from the dialpad, recent calls, SMS Inbox or from
incoming call, you will hear the same network tones for
the phonebooks. To go back to the first call, refer to
call waiting that you normally hear when using your
“Toggling Between Calls” in this section. To combine two
button, answer softmobile phone. Press the phone
calls, refer to “Join Calls” in this section.
key or caller ID box to place the current call on hold and
answer the incoming call.
Answer Or Ignore An Incoming Call — No Call
Currently In Progress
194 Uconnect™ ACCESS USER’S MANUAL
terminated and if there is a call on hold, it will become
the new active call. If the active call is terminated by the
During an active call, touch the “Hold” soft-key on the
far end, a call on hold may not become active automatiPhone main screen.
cally. This is cell phone-dependent.
Toggling Between Calls
Redial
If two calls are in progress (one active and one on hold),
touch the “Swap” soft-key on the Phone main screen. • Press the “Redial” soft-key,
Only one call can be placed on hold at a time.
• or press the
and after the “Listening” prompt and
the
following
beep,
say “Redial”,
button to toggle between the
You can also press the
Place/Retrieve A Call From Hold
active and held phone call.
Join Calls
• After the “Listening” prompt and the following beep,
say “Redial”,
When two calls are in progress (one active and one on • The Uconnect™ Phone will call the last number that
was dialed from your mobile phone.
hold), touch the “Join Calls” soft-key on the Phone main
screen to combine all calls into a Conference Call.
Call Continuation
Call Termination
Call continuation is the progression of a phone call on the
but- Uconnect™ Phone after the vehicle ignition key has been
To end a call in progress, momentarily press the
ton or the end soft-key. Only the active call(s) will be switched to OFF.
Uconnect™ ACCESS USER’S MANUAL
195
NOTE: The call will remain within the vehicle audio phone and the Uconnect™ Phone, follow the instructions
system until the phone becomes out of range for the described in your mobile phone User’s Manual.
Bluetootht connection. It is recommended to press the
Things You Should Know About Your Uconnect™
“transfer” soft-key when leaving the vehicle.
Phone
Advanced Phone Connectivity
Voice Command
Transfer Call To And From Mobile Phone
• For best performance, adjust the rearview mirror to
The Uconnect™ Phone allows ongoing calls to be transprovide at least ½ in (1 cm) gap between the overhead
ferred from your mobile phone to the Uconnect™ Phone
console (if equipped) and the mirror.
without terminating the call. To transfer an ongoing call
• Always wait for the beep before speaking.
from your paired mobile phone to the Uconnect™ Phone
or vice versa, press the Transfer button on the Phone • Speak normally, without pausing, just as you would
main screen.
speak to a person sitting a few feet/meters away from
you.
Connect Or Disconnect Link Between The Uconnect™
Phone And Mobile Phone
• Make sure that no one other than you is speaking
during a voice command period.
If you would like to connect or disconnect the Bluetootht
connection between a Uconnect™ Phone paired mobile • Performance is maximized under:
• low-to-medium blower setting,
196 Uconnect™ ACCESS USER’S MANUAL
• low-to-medium vehicle speed,
• low road noise,
• smooth road surface,
• fully closed windows,
• dry weather condition.
• Even though international dialing for most number
combinations is supported, some shortcut dialing
number combinations may not be supported.
• In a convertible vehicle, system performance may be
compromised with the convertible top down.
• Even though the system is designed for users speaking Far End Audio Performance
in North American English, French, and Spanish ac- • Audio quality is maximized under:
cents, the system may not always work for some.
• low-to-medium blower setting,
• When navigating through an automated system such
• low-to-medium vehicle speed,
as voice mail, or when sending a page, before speaking
• low road noise,
the digit string, make sure to say “Send”.
• smooth road surface,
• It is recommended that you do not store names in your
• fully closed windows,
favorites phonebook while the vehicle is in motion.
• dry weather conditions, and
• Phonebook (Mobile and Favorites) name recognition
• operation from the driver’s seat.
rate is optimized when the entries are not similar.
• You can say “O” (letter “O”) for “0” (zero).
Uconnect™ ACCESS USER’S MANUAL
197
• Performance, such as audio clarity, echo, and loudness NOTE: Uconnect™ Phone SMS is only available when
to a large degree rely on the phone and network, and the vehicle is not in moving.
not the Uconnect™ Phone.
Read Messages:
• Echo at the far end can sometimes be reduced by
If you receive a new text message while your phone is
lowering the in-vehicle audio volume.
connected to Uconnect™ Phone, an announcement will
• In a convertible vehicle, system performance may be be made to notify you that you have a new text message.
compromised with the convertible top down.
Once a message is received and viewed or listened to,
you will have the following options:
SMS
Uconnect™ Phone can read or send new messages on • Send a Reply
your phone.
• Forward
Your phone must support SMS over Bluetootht in order
• Call
to use this feature. If the Uconnect™ Phone determines
your phone is not compatible with SMS messaging over Send Messages Using Soft-Keys:
Bluetootht the “Messaging” button will be greyed out
You can send messages using Uconnect™ Phone. To send
and the feature will not be available for use.
a new message:
• Touch the “Phone” soft-key,
198 Uconnect™ ACCESS USER’S MANUAL
• Touch the “messaging” soft-key then “New Message”, While the list of defined messages are being read, you can
interrupt the system by pressing the
button and
• Touch one of the 18 preset messages and the person
saying the message you want to send.
you wish to send the message to,
After the system confirms that you want to send your
• If multiple numbers are available for the contact select
message to John Smith, your message will be sent.
which number you would like to have the message
sent,
List of Preset Messages:
• Press “Send” or “Cancel”.
1. Yes.
Send Messages Using Voice Commands:
2. No.
• Press the
button,
3. Okay.
• After the “Listening” prompt and the following beep, 4.
say “Send message to John Smith mobile”,
5.
• After the system prompts you for what message you
6.
want to send, say the message you wish to send or say
“List”. There are 18 preset messages.
7.
I can’t talk right now.
Call me.
I’ll call you later.
I’m on my way.
8. Thanks.
Uconnect™ ACCESS USER’S MANUAL
9. I’ll be late.
10. I will be  minutes late.
11. See you in  minutes.
12. Stuck in traffic.
13. Start without me.
14. Where are you?
15. Are you there yet?
16. I need directions.
17. I’m lost.
18. See you later.
Bluetootht Communication Link
Mobile phones have been found to lose connection to the
Uconnect™ Phone. When this happens, the connection
199
can generally be reestablished by switching the phone
OFF/ON. Your mobile phone is recommended to remain
in Bluetootht ON mode.
Power-Up
After switching the ignition key from OFF to either the
ON or ACC position, or after a language change, you
must wait at least 15 seconds prior to using the system.
200 Uconnect™ ACCESS USER’S MANUAL
Voice Tree
Uconnect™ ACCESS USER’S MANUAL
201
• Send dial tones for automated systems is available
while a call is active. This is an example that uses a
You can replace “John Smith” with any name in your
Phonebook Record named “Voicemail Password.”
mobile or favorite phone book. You can also say “Send
a message to John Smith” and the system will ask you • Storing Dial tones in contact names is possible but only
which phone number you want to send a message to
the first number encountered in a contact name will be
for John Smith.
sent. For example if there is a number stored in the
Home and Work numbers for the contact “Voicemail
You can replace “Mobile” with “Home”, “Work” or
password” only the Home number will be sent
“Other”.
• If your phone does not support phonebook download
You can replace “Incoming Calls” with “Outgoing
or call log download over Bluetooth than these comCalls” or “Missed Calls”.
mands will return a response that the contact does not
You can replace “248 555 1212” with any phone
exist in the phonebook.
number supported by your Mobile phone.
• Emergency and Towing assistance are contacts that
These commands can be used during a phone call after
have been pre-loaded in the phonebooks. Commands
pushing the Uconnect™ Voice Command button on
such as “Call Emergency” and “Call Towing Assisthe steering wheel. Please note the call will be muted
tance” will call the corresponding number stored with
while the VR session is active.
those contacts.
NOTE:
•
•
•
•
•
202 Uconnect™ ACCESS USER’S MANUAL
NOTE: Available Voice Commands are shown in bold
face and underlined in the gray shaded boxes.
Uconnect™ ACCESS USER’S MANUAL
203
204 Uconnect™ ACCESS USER’S MANUAL
NOTE:
• You can replace “4” with any message number shown
on the screen.
• You can replace “John Smith” with any name in your
mobile or favorite phone book. You can also say “Send • If your phone does not support phonebook download
or call log download over Bluetooth than these coma message to John Smith” and the system will ask you
mands will return a response that the contact does not
which phone number you want to send a message to
exist in the phonebook.
for John Smith.
• You can replace “Mobile” with “Home”, “Work” or
“Other”.
• You can replace “Incoming Calls” with “Outgoing
Calls” or “Missed Calls”.
• Messaging commands only work if the Uconnect system is equipped with this feature and the mobile
phone supports messaging over Bluetooth.
• You can replace “248 555 1212” with any phone
number supported by your Mobile phone.
Uconnect™ ACCESS USER’S MANUAL
205
206 Uconnect™ ACCESS USER’S MANUAL
NOTE: Available Voice Commands are shown in bold Uconnect™ Voice Command
face and underlined in the gray shaded boxes.
Voice Command Overview
General Information
This device complies with Part 15 of the FCC rules and
RSS 210 of Industry Canada. Operation is subject to the
following conditions:
The Uconnect™ Voice Command system allows you to control your AM, FM radio, satellite radio, disc player, SD Card, USB/iPod and
Sirius Travel Link.
• Changes or modifications not expressly approved by
the party responsible for compliance could void the NOTE: Take care to speak into the Voice Command
user’s authority to operate the equipment.
system as calmly and normally as possible. The ability of
the Voice Command system to recognize user voice
• This device may not cause harmful interference.
commands may be negatively affected by rapid speaking
• This device must accept any interference received, or a raised voice level.
including interference that may cause undesired operation.
WARNING!
ALWAYS drive safely with your hands on the wheel.
You have full responsibility and assume all risks
(Continued)
Uconnect™ ACCESS USER’S MANUAL
WARNING! (Continued)
related to the use of the Uconnect™ features and
applications in this vehicle. Only use Uconnect™
when it is safe to do so. Failure to do so may result in
an accident involving serious injury or death.
207
what can be said based on the context you are in. After
three consecutive failures of a spoken command the VR
session with end.
Pressing the Uconnect™ Voice Command
button
while the system is speaking is known as “barging in.”
The system will be interrupted, and after the beep, you
When you press the Uconnect™ Voice Command can say a command. This will become helpful once you
button, you will hear a beep. The beep is your signal start to learn the options.
to give a command.
NOTE: At any time, you can say the words “Cancel” or
If no command is spoken the system will say one of two “Help”.
responses:
These commands are universal and can be used from any
menu. All other commands can be used depending upon
• I didn’t understand
the active application.
• I didn’t get that, etc.,
When using this system, you should speak clearly and at
If a command is not spoken a second time, the system
a normal speaking volume.
will respond with an error and give some direction as
208 Uconnect™ ACCESS USER’S MANUAL
The system will best recognize your speech if the win- Smith”. For multiple inputs in the same phrase or sendows are closed, and the heater/air conditioning fan is tence, the system identifies the topic or context and
set to low.
provides the associated follow-up prompt such as “Who
do you want to call?” in the case where a phone call was
At any point, if the system does not recognize one of your
requested but the specific name was not recognized.
commands, you will be prompted to repeat it.
The system utilizes continuous dialog; when the system
To hear available commands, press the Uconnect™ Voice
requires more information from the user it will ask a
Command
button and say “Help”. You will hear
question to which the user can respond without pressing
available commands for the screen displayed.
button.
the Uconnect™ Voice Command
Natural Speech
Uconnect™ Voice Commands
Natural speech allows the user to speak commands in
The Uconnect™ Voice Command system understands
phrases or complete sentences. The system filters out
two types of commands. Universal commands are availcertain non-word utterances and sounds such as “ah”
able at all times. Local commands are available if the
and “eh”. The system handles fill-in words such as “I
supported radio mode is active.
would like to”.
Start a dialogue by pressing the Uconnect™ Voice ComThe system handles multiple inputs in the same phrase
button.
mand
or sentence such as “make a phone call” and “to Kelly
Uconnect™ ACCESS USER’S MANUAL
Changing the Volume
209
Disc
1. Start a dialogue by pressing the Voice Command To switch to the disc mode, say “Change source to Disc”.
This command can be given in any mode or screen:
button.
2. Say a command (e.g., “Help”).
3. Use the ON/OFF VOLUME rotary knob to adjust the
volume to a comfortable level while the Voice Command system is speaking. Please note the volume
setting for Voice Command is different than the audio
system.
Starting Voice Recognition (VR) Session in
Radio/Player Modes
In this mode, you can say the following commands:
NOTE: The commands can be said on any screen when
a call is not active after pushing the Uconnect™ Voice
button.
Command
• “Track” (#) (to change the track)
210 Uconnect™ ACCESS USER’S MANUAL
Voice Tree
Uconnect™ ACCESS USER’S MANUAL
211
NOTE:
1. You can replace “950 AM” with any other AM or FM
frequency, such as “98.7 FM”.
2. You can replace “80’s on 8” with any other satellite
station name received by the radio.
3. You can replace “8” with any other satellite station
named received by the radio.
4. You can replace “rock” with any of the satellite music
types.
NOTE: Available Voice Commands are shown in bold
face and shaded grey.
212 Uconnect™ ACCESS USER’S MANUAL
Uconnect™ ACCESS USER’S MANUAL
213
NOTE:
1. You can replace the album, artist, song, genre, playlist,
podcast and audio book names with any corresponding names on the current device that is playing.
2. You can replace “8” with any track on the CD that is
currently playing. Command is only available when
CD is playing.
3. Playlist, Podcast and audio book commands are only
available when the iPod is connected and playing.
4. VR commands, Albums, Artists, and Genre names are
based on the music database provided by Gracenote.
NOTE: Available Voice Commands are shown in bold
face and shaded grey.
214 Uconnect™ ACCESS USER’S MANUAL
Uconnect™ ACCESS USER’S MANUAL
215
NOTE:
1. You can replace “NFL” with any league shown on the
sports league screen. For example you can say “Show
MLB headlines” or “Show PGA headlines”.
2. You can replace “Headlines” with any menu items
shown on a league screen. For example you can say
“Show NFL Schedule and results” or “Show NCAA
Basketball AP top 25” or “Show Major League Baseball
Teams”.
3. You can also say “Show Current Weather” or “Show
extended weather” or “Show five day forecast” or
“Show ski info” to get other forecasts.
NOTE: Available Voice Commands are shown in bold
face and shaded grey.
216 Uconnect™ ACCESS USER’S MANUAL
Uconnect™ ACCESS USER’S MANUAL
217
NOTE:
1. Only available with Navigation equipped vehicles.
2. You can replace “Player” with “Radio”, “Navigation”,
“Phone”, “Climate”, “More” or “Settings”.
3. Navigation commands only work if equipped with
Navigation.
NOTE: Available Voice Commands are shown in bold
face and shaded grey.
218 Uconnect™ ACCESS USER’S MANUAL
Uconnect™ ACCESS USER’S MANUAL
NOTE:
219
Main Menu
1. You can also say “Find City”, “Find Favorite”, “Find
Play by Category”, “Find Play by Name”, “Find
Recently Found”, “Where to?” or “Go Home”.
2. You can say “Find Nearest” then “Restaurant”, “Fuel”,
“Transit”, “Lodging”, “Shopping”, “Bank”, “Entertainment”, “Recreation”, “Attractions”, “Community”, “Auto Services”, “Hospitals”, “Parking”, “Airport”, “Police Stations”, “Fire Stations”, or “Auto
Dealers”.
NOTE: Available Voice Commands are shown in bold
face and shaded grey.
Navigation
• Touch Where To? to find or route to a destination.
Getting Started
• Touch View Map to view the map.
To access the Navigation system, touch the Nav soft-key • Touch Information to view Traffic, Where Am I? and
on bottom of the screen.
Trip Computer information
220 Uconnect™ ACCESS USER’S MANUAL
• Touch Emergency to search for Hospitals, Police and
Fire Stations near your current location. You can also
display your current location and save any Emergency
facility location to your Favorites.
• Touch Stop to stop a route.
• Touch Detour to detour a route.
Where To?
From the Nav Main Menu, touch the Where To? soft-key
and select one of the following methods to program a
route guidance.
NOTE: Refer to the individual section of the chosen
option for further information.
• Address
Uconnect™ ACCESS USER’S MANUAL
221
Touch this soft-key to search by a street address or a street • Go Home
name with house number.
Touch this soft-key to program or confirm a route to the
• Recent
saved home address.
Touch this soft-key to access previously routed addresses • GEO Coordinates
or locations.
Touch this soft-key to route to a GEO Coordinate. A geo
• Point of Interest
coordinate is a coordinate used in geography. You can
determine a geo coordinate with the help of a handheld
Touch this soft-key when you want to route to a point of
GPS receiver, a map, or the navigation system.
interest. The Point of Interest database allows you to
select a destination from a list of locations and public • Point on Map
places, or points of interest (POI).
Touch this soft-key to select a destination directly from
• Favorites
the Map screen. By selecting a street segment or icon, you
can quickly enter a destination without the need to input
Touch this soft-key to access previously saved addresses
the city name or street.
or locations.
• City Center
• Intersection
Touch this soft-key to enter in two street names as a
destination.
222 Uconnect™ ACCESS USER’S MANUAL
Touch this soft-key to route to a particular city. The
navigation system will calculate a route with the destination at the center of the city.
• Closest City
Touch this soft-key to route to a nearby city. The navigation system will calculate a route with the destination at
the center of the nearby city.
• Phone Number
Touch this soft-key to route to a location or point of
interest by the phone number.
NOTE: You can touch the back arrow soft-key to return 1. While in the Nav Main Menu, touch the Where To?
soft-key and then touch the Address soft-key.
to the previous screen or the X soft-key to exit.
Where To? – Address
To enter a destination by Address, follow these steps:
Uconnect™ ACCESS USER’S MANUAL
223
NOTE: To change the state and/or country, touch the 2. Touch Spell City or Spell Street to begin entering the
address of your destination.
state, country soft-key and follow the prompts to change
the state and/or country.
If you touch Spell City, you will have to enter and
select/touch the desired city name, followed by the
desired street name and lastly the house number.
If you touch Spell Street, you will have to enter and
224 Uconnect™ ACCESS USER’S MANUAL
select/touch the desired street name in the correct city
and then you will have to enter the house number
3. Once the correct City, Street and Number has been
entered, you will be asked to confirm your destination
by touching OK.
4. Touch the Yes soft-key to confirm your destination and
begin your route.
NOTE: If you are currently on a route guidance and you
select an Address, the system will ask you to choose one
of the following:
• Cancel previous route
• Add as first destination
• Add as last destination
Uconnect™ ACCESS USER’S MANUAL
225
You can touch the back arrow soft-key to return to the
previous screen or the X soft-key to exit.
Where To? – Recent
Touch the soft-key with the name of the desired destination. Confirm the route with Yes to start the route
guidance.
To delete a destination from the list, touch the trash can
To route to a recent destination, touch the Recent soft-key icon soft-key.
in the NAV Main Menu.
226 Uconnect™ ACCESS USER’S MANUAL
• Move Up in the list
• Move Down in the list
• Place Pin on the location (saves the spot on the list)
NOTE: You can touch the back arrow soft-key to return
to the previous screen or the X soft-key to exit.
Where To? – Point of Interest
To enter a destination by Point of Interest (POI) touch the
Point of Interest soft-key in the Nav Main Menu.
To display the options for a destination touch the Options
soft-key that looks like a gear.
The following Options are available for each destination:
• Edit Name
• Add Phone Number
Uconnect™ ACCESS USER’S MANUAL
227
The Point of Interest database allows you to select a You have the following POIs to choose from:
destination from a list of locations and public places, or
• Gas Stations
points of interest (POI)s.
• Restaurants
• Hotels/Motels
• ATM/Banking
228 Uconnect™ ACCESS USER’S MANUAL
• All POIs
• In a City
• Spell POI Name
• Near Destination (only available during route
guidance)
You can also change your POI search area, by touching
the Change Search Area soft-key. You will have the • Along Route (only available during route guidance)
following options to change your search area:
NOTE: You can touch the back arrow soft-key to return
to the previous screen or the X soft-key to exit.
POI – Gas Stations
To select a Gas Station POI, touch Point of Interest from
the Nav Main Menu, then touch the Point of Interest
soft-key and then touch the Gas Stations soft-key.
• Around Me
Uconnect™ ACCESS USER’S MANUAL
229
• ABC (Search)
Touch the desired Gas Station and touch Yes to confirm
the destination.
NOTE: If you are currently on a route guidance and you
select a gas station, the system will ask you to choose one
of the following:
• Cancel previous route
• Add as first destination
• Add as last destination
You can search for a gas station by the following catego- You can touch the back arrow soft-key to return to the
ries, which are soft-key tabs at the top of the screen.
previous screen or the X soft-key to exit.
• Name
POI – Restaurants
• Distance
To select a Restaurant POI, touch Point of Interest from
the Nav Main Menu, then touch the Point of Interest
soft-key and then touch the Restaurants soft-key.
• Type
230 Uconnect™ ACCESS USER’S MANUAL
You can search for a restaurants by the following catego- You can touch the back arrow soft-key to return to the
previous screen or the X soft-key to exit.
ries, which are soft-key tabs at the top of the screen.
• Name
POI – Hotels/Motels
• Distance
To select a Hotel or Motel POI, touch Point of Interest
from the Nav Main Menu, then touch the Point of Interest
soft-key and then touch the Hotels/Motels soft-key.
• Type
• ABC (Search)
You can search for a hotel or motel by the following
Touch the desired Restaurant and touch Yes to confirm categories, which are soft-key tabs at the top of the
screen.
the destination.
NOTE: If you are currently on a route guidance and you • Name
select a Restaurant, the system will ask you to choose one • Distance
of the following:
• Type
• Cancel previous route
• ABC (Search)
• Add as first destination
Touch the desired hotel or motel and touch Yes to confirm
• Add as last destination
the destination.
Uconnect™ ACCESS USER’S MANUAL
231
NOTE: If you are currently on a route guidance and you • Name
select a Hotel or Motel, the system will ask you to choose
• Distance
one of the following:
• Type
• Cancel previous route
• ABC (Search)
• Add as first destination
Touch the desired ATM or Bank and touch Yes to confirm
• Add as last destination
the destination.
You can touch the back arrow soft-key to return to the
NOTE: If you are currently on a route guidance and you
previous screen or the X soft-key to exit.
select an ATM or Bank POI, the system will ask you to
choose one of the following:
POI – ATM/Banking
To select an ATM or Bank POI, touch Point of Interest • Cancel previous route
from the Nav Main Menu, then touch the Point of Interest
• Add as first destination
soft-key and then touch the ATM/Banking soft-key.
• Add as last destination
You can search for an ATM or Bank by the following
categories, which are soft-key tabs at the top of the You can touch the back arrow soft-key to return to the
screen.
previous screen or the X soft-key to exit.
232 Uconnect™ ACCESS USER’S MANUAL
All POIs
The available categories are:
• ATM/Banking
• Automotive
• Coffee Shops
• Community
• Entertainment
• Gas Stations
• Health and Beauty
• Highway Exit
•
To select a POI type, touch Point of Interest from the Nav
Main Menu, then touch the Point of Interest soft-key and •
then touch All POIs soft-key.
•
You can search through the available POI categories to
•
find your desired POI.
Hospital
Hotels/Motels
Other
Parking
Uconnect™ ACCESS USER’S MANUAL
233
• Recreation
• Add as first destination
• Restaurants
• Add as last destination
• Shopping
You can touch the back arrow soft-key to return to the
previous screen or the X soft-key to exit.
• Travel
• Truck
POI – Spell Name
To search for a specific POI, touch Point of Interest from
Select a category and then select a subcategory if neces- the Nav Main Menu, then touch the Point of Interest
sary. Touch the ABC soft-key to activate a keyboard with soft-key and then touch the Spell Name soft-key.
Alphabetic characters in order to search within the POI
A keyboard will appear on the screen. Type in the POI
categories.
that you want to search and touch the List soft-key to
Touch the desired POI and touch Yes to confirm the display available items.
destination.
Touch the desired POI and touch Yes to confirm the
NOTE: If you are currently on a route guidance and you destination.
select a POI, the system will ask you to choose one of the
NOTE: If you are currently on a route guidance and you
following:
select a POI, the system will ask you to choose one of the
• Cancel previous route
following:
234 Uconnect™ ACCESS USER’S MANUAL
• Cancel previous route
• Add as first destination
• Add as last destination
You can touch the back arrow soft-key to return to the
previous screen or the X soft-key to exit.
Where To? – Favorite Destinations
To route to a favorite destination, touch the Favorites
soft-key in the NAV Main Menu.
Touch the soft-key with the name of the desired favorite
destination and confirm the route with Yes to start the
route guidance.
To delete a destination from the list, touch the trash can
icon soft-key.
Uconnect™ ACCESS USER’S MANUAL
235
To save a favorite destination, touch the Add Favorite You can touch the back arrow soft-key to return to the
previous screen or the X soft-key to exit.
soft-key and follow the steps to route a destination.
To display the options for a favorite destination touch the Where To? – Intersection
Options soft-key that looks like a gear.
To enter a destination by Intersection, follow these steps:
The following Options are available for each favorite
destination:
• Edit Name
• Add Phone Number
NOTE: If you are currently on a route guidance and you
select a Favorite, the system will ask you to choose one of
the following
• Cancel previous route
• Add as first destination
• Add as last destination
1. While in the Nav Main Menu, touch the Where To?
soft-key and then touch the Intersection soft-key.
236 Uconnect™ ACCESS USER’S MANUAL
This menu shows the default country and state setting. 2. This menu shows the default country and state settings.
NOTE: To change the state and/or country, touch the
If you touch Spell City, you will have to enter and
state, country soft-key and follow the prompts to change
select/touch the desired city name, followed by the
the state and/or country.
desired street name and lastly you will have to enter
the intersection street.
If you touch Spell Street, you will have to enter and
Uconnect™ ACCESS USER’S MANUAL
237
select/touch the desired street name in the correct city Where To? – Go Home
and then you will have to enter the intersecting street.
To enter your Home Address, follow these steps:
3. Once the correct City and Intersection has been entered, you will be asked to confirm your destination.
4. Touch the Yes soft-key to confirm your destination and
begin your route.
NOTE: If you are currently on a route guidance and you
select a Intersection, the system will ask you to choose
one of the following:
• Cancel previous route
• Add as first destination
• Add as last destination
You can touch the back arrow soft-key to return to the
previous screen or the X soft-key to exit.
1. While in the Nav Main Menu, touch the Where To?
soft-key and then touch the Go Home soft-key. If there
is no Home Address entered, touch Yes to enter it now.
238 Uconnect™ ACCESS USER’S MANUAL
2. To set your set your Home Address choose one of the 4. Touch the Save soft-key to confirm your destination
and begin the route to your Home Address.
following options:
NOTE: Refer to the individual section of the chosen 5. This address will be saved as your Home Address and
it can be accessed by touching the Go Home soft-key
option for further information.
in the Where To? Menu.
• Address
• Recent
Change/Delete Your Home Address
• Point of Interest
To change or delete your current Home Address perform
• Favorites
the following:
• Intersection
1. Touch the Go Home soft-key in the Where To? Menu
• GEO Coordinates
2. Touch the Options soft-key at the bottom of the
• Point on Map
displayed map.
• City Center
• Closest Cities
3. Touch Clear Home and then touch Yes to clear/delete
your Home Address.
• Phone Number
3. Once you have generated your Home Address, you 4. To enter in a new Home Address, follow the Where
To? – Go Home procedure.
will be asked to Save it.
Uconnect™ ACCESS USER’S MANUAL
239
NOTE: You can touch the back arrow soft-key to return Touch the soft-key with the name of the desired Trip and
to the previous screen or the X soft-key to exit.
touch the first destination in the list. Confirm the route by
touching Yes to start the route guidance.
Where To? – Trips
To add a Trip, follow these steps:
1. Touch the Create new Trip soft-key.
2. Type in the new Trip Name.
3. Touch Add Destination to add destinations to your
trip.
4. Choose from the following options to add a destination
NOTE: Refer to the individual section of the chosen
option for further information.
• Address
• Recent
To route to a saved Trip, touch the Recent soft-key in the
• Point of Interest
NAV Main Menu.
• Favorites
240 Uconnect™ ACCESS USER’S MANUAL
• Intersection
• GEO Coordinates
• Point on Map
• City Center
• Closest Cities
• Phone Number
5. Add more needed destinations to your trip.
NOTE: Each destination will be listed in order, with the
last destination being the final destination.
6. Your new Trip will appear on the Trips list.
To delete a Trip from the list, touch the trash can icon
soft-key.
To display the options for a trip touch the Options
soft-key that looks like a gear.
The following Options are available for each trip:
• Edit Name
• Move Up in the list
• Move Down in the list
NOTE: You can touch the back arrow soft-key to return
to the previous screen or the X soft-key to exit.
Where To? – GEO Coordinate
Uconnect™ ACCESS USER’S MANUAL
241
To enter a destination by GEO Coordinate, touch Where 1. Enter the Latitude by typing in the numbers. Use the
To? in the Nav Main Menu and then touch the GEO
left and right arrows to select specific numbers in the
Coordinate soft-key.
location shown.
2. Touch the OK soft-key.
242 Uconnect™ ACCESS USER’S MANUAL
3. Enter the Longitude by typing in the numbers. Use the You can touch the back arrow soft-key to return to the
left and right arrows to select specific numbers in the previous screen or the X soft-key to exit.
location shown.
Where To? – Point on Map
NOTE: Touch the Format soft-key to change the format
of the Latitude/Longitude entry.
4. Touch OK to confirm the destination.
5. Touch the Yes soft-key to confirm your destination and
begin your route.
NOTE: If you are currently on a route guidance and you
select a Geo Coordinate, the system will ask you to
choose one of the following:
• Cancel previous route
• Add as first destination
• Add as last destination
To enter a destination by Point on Map, touch Where To?
in the Nav Main Menu and then touch the Point on Map
soft-key.
Uconnect™ ACCESS USER’S MANUAL
243
3. Touch the Yes soft-key to confirm your destination and
begin your route.
NOTE: If you are currently on a route guidance and you
select a Point on Map, the system will ask you to choose
one of the following:
• Cancel previous route
• Add as first destination
• Add as last destination
You can touch the back arrow soft-key to return to the
previous screen or the X soft-key to exit.
1. Use the touch-screen to drag the center of the cross
over the desired destination.
Where To? – City Center
2. Either touch the address bar at the top center of the
screen to confirm your location or touch the Details
soft-key in the upper right corner to display the
available locations near that point on the map.
244 Uconnect™ ACCESS USER’S MANUAL
3. Touch the Yes soft-key to confirm your destination and
begin your route.
NOTE: If you are currently on a route guidance and you
select a City Center, the system will ask you to choose one
of the following:
• Cancel previous route
• Add as first destination
• Add as last destination
You can touch the back arrow soft-key to return to the
previous screen or the X soft-key to exit.
To enter a destination by City Center, touch Where To? in
the Nav Main Menu and then touch the City Center Where To? – Closest City
soft-key.
1. Enter the name of the City you would like to route to.
2. Touch the desired city from the list.
Uconnect™ ACCESS USER’S MANUAL
245
To enter a destination by Closest City, touch Where To? in 1. Touch the desired city from the list.
the Nav Main Menu and then touch the Closest City
2. Touch the Yes soft-key to confirm your destination and
soft-key.
begin your route.
NOTE: If you are currently on a route guidance and you
select a Closest City, the system will ask you to choose
one of the following:
246 Uconnect™ ACCESS USER’S MANUAL
• Cancel previous route
• Add as first destination
• Add as last destination
You can touch the back arrow soft-key to return to the
previous screen or the X soft-key to exit.
Where To? – Phone
To enter a destination by Phone number, touch Where To?
in the Nav Main Menu and then touch the Phone
Number soft-key.
1. Enter the Phone Number of the destination you would
like to route to.
2. Touch the desired destination from the list.
Uconnect™ ACCESS USER’S MANUAL
247
3. Touch the Yes soft-key to confirm your destination and
begin your route.
NOTE: If you are currently on a route guidance and you
select a Phone number destination, the system will ask
you to choose one of the following:
• Cancel previous route
• Add as first destination
• Add as last destination
You can touch the back arrow soft-key to return to the
previous screen or the X soft-key to exit.
• Options – Touch the Options soft-key to display a list
of options to alter your route. To make a selection
touch and release the desired setting until a checkBefore confirming the route with the Yes soft-key, it is
mark appears.
possible to select options different from the default route
settings.
Before Route Guidance
248 Uconnect™ ACCESS USER’S MANUAL
• Save – Touch the Save soft-key to save the destination
as a Favorite.
Touch the Yes soft-key to confirm your destination and to
start your route guidance.
NOTE: You can touch the back arrow soft-key to return
to the previous screen or the X soft-key to exit.
View Map
• Avoid – Touch the Avoid soft-key to choose road types
to avoid during your route. To make a selection touch
and release the desired setting until a check-mark
appears.
NOTE: Since toll roads, tunnels and ferries are built for
the purpose of shortening travel distances, avoiding
these road types may increase distance and travel time.
Uconnect™ ACCESS USER’S MANUAL
249
• Zoom In +/ Zoom Out –
Touch the Zoom In (+) or Zoom Out (–) soft-keys to
change the zoom level. Roads with lower functional
classification are not shown in higher zoom levels. (E.g.
residential streets, lightly-traveled county roads.)
• Time of Arrival/Time to Destination/Distance (only
during route guidance)
Touch the soft-key in the upper right area of the screen to
the display items available. Touch the desired option
soft-key.
– Time of Arrival
Touch the View Map soft-key from the Nav Main Menu
– Time to Destination
to display a map of your current position.
– Distance
With the map displayed you have the following features
• Turn List (only during route guidance)
available.
• Menu
Touch this soft-key to return to the Nav Main Menu.
Touch the area in the upper center part of the screen that
displays your next turn to see a Turn List for your current
route.
250 Uconnect™ ACCESS USER’S MANUAL
Touch a turn in the displayed Turn List for the following
Touch this soft-key to view the turn list for the current
options:
route.
– Show on Map
– Stop Guidance
Touch this soft-key to stop route guidance.
– Avoid Street
• Where Am I?
• Options (only during route guidance)
Touch the Options soft-key to display the following
options. Touch the desired soft-key.
– 2D North Up/Map View 2D/ Map View 3D
Touch this soft-key to scroll between the three viewing
options.
– Settings
Touch this soft-key to view all the available settings.
See View Map – Settings for more information.
– Repeat
Touch this soft-key to repeat the current voice prompt.
– Turn List
Touch the area in the lower center part of the screen that
displays your current location to view the Where Am I?
view.
Where Am I? displays the address and GEO Coordinates
of your current location.
– Touch the GPS soft-key to view the GPS information.
– Touch the Save soft-key to save the location in your
Favorites.
NOTE: You can touch the back arrow soft-key to return
to the previous screen or the X soft-key to exit.
Uconnect™ ACCESS USER’S MANUAL
View Map – Settings
251
• Map Setup
Touch this soft-key to display items to customize how
your map is viewed. Settings – Map Setup for more
information.
• Speed Limit
Touch this soft-key to turn on/off speed limit warning
announcements and to enter a pre-defined speed limit for
your route.
• Guidance Options
Touch this soft-key to display items to customize your
route guidance. Settings – Guidance Options for more
information.
With the Map displayed, touch the Options soft-key and
then touch the Settings soft-key. You can also access this • Units
menu by touching the Settings soft-key in the lower right Touch this soft-key to change the units display. Touch the
of the Nav Main Menu.
desired soft-key.
– U.S. (mile/feet)
The following Map Settings are available.
252 Uconnect™ ACCESS USER’S MANUAL
– Imperial (mile/yard)
– Metric (meter)
• GPS
Touch this soft-key to change the GPS display. Touch the
desired soft-key.
– Decimal
– DMS
– DM
• Copy device information to USB? (If Equipped)
Touch this soft-key to copy your radio information to a
With the Map displayed, touch the Options soft-key, then
USB jump drive through the available USB port.
touch the Settings soft-key and then the Map Setup
soft-key. You can also access this menu by touching the
Settings – Map Setup
Settings soft-key in the lower right of the Nav Main
Menu.
The following Map Setup options are available.
• Map View
Uconnect™ ACCESS USER’S MANUAL
253
Touch this soft-key to change how the Map View is Touch this soft-key to change the Destination Information
that is displayed in the upper right corner of the Map
displayed. Touch the desired soft-key.
View. Touch the desired soft-key.
– 3D
– Time of Arrival
– 2D
– Time to Destination
• Orientation
– Distance
Touch this soft-key to change how the Map Orientation is
• AutoZoom
displayed. Touch the desired soft-key.
Touch this soft-key to change how the AutoZoom feature
– North Up
adjust the zoom level during guidance in Map View.
– Heading Up
Touch the desired soft-key.
• Current Street
– Far
Touch this soft-key to turn on/off the current street
– Normal
display on the lower center of the Map View. Touch and
– Near
release the soft-key until a check-mark appears, showing
– Off
the setting has been selected.
• Vehicle Icon
• Destination Information
254 Uconnect™ ACCESS USER’S MANUAL
Touch this soft-key to change the vehicle icon that is
displayed while in Map View. Touch Previous or Next to
view the available icons. Touch the back icon soft-key
when you’ve made you selection.
Touch this soft-key to show Traffic Message Channel
(TMC) Incidents while in Map View. Touch and release
the soft-key until a check-mark appears, showing the
setting has been selected.
• Show POI Icons
• Speed and Flow
Touch this soft-key to show the selected Point of Interest
icons while in Map View. Touch and release the soft-key
until a check-mark appears, showing the setting has been
selected.
Touch this soft-key to show the Speed and Flow of traffic
while in Map View. Touch and release the soft-key until
a check-mark appears, showing the setting has been
selected.
• POI Icon List
• 3D City Models
Touch this soft-key to display the available Point of
Interest icons you would like displayed while in Map
View. Touch and release the desired selection soft-key
until a check-mark appears, showing the setting has been
selected.
Touch this soft-key to display 3D city models while in
Map View. Touch and release the soft-key until a checkmark appears, showing the setting has been selected.
• TMC Incidents
• 3D Landmarks
Touch this soft-key to display 3D landmarks while in
Map View. Touch and release the soft-key until a checkmark appears, showing the setting has been selected.
Uconnect™ ACCESS USER’S MANUAL
• Digital Terrain Model
255
• River Names
Touch this soft-key to display the areas terrain while in Touch this soft-key to display River Names while in Map
Map View. Touch and release the soft-key until a check- View. Touch and release the soft-key until a check-mark
appears, showing the setting has been selected.
mark appears, showing the setting has been selected.
• Park Areas
NOTE: You can touch the back arrow soft-key to return
to the previous screen or the X soft-key to exit.
Touch this soft-key to display Park Areas while in Map
View. Touch and release the soft-key until a check-mark Settings – Guidance
appears, showing the setting has been selected.
With the Map displayed, touch the Options soft-key, then
• Railroads
touch the Settings soft-key and then the Guidance softTouch this soft-key to display Railroad tracks while in key. You can also access this menu by touching the
Map View. Touch and release the soft-key until a check- Settings soft-key in the lower right of the Nav Main
Menu.
mark appears, showing the setting has been selected.
• City Areas
Touch this soft-key to display City Areas while in Map
View. Touch and release the soft-key until a check-mark
appears, showing the setting has been selected.
The following Guidance options are available.
• Play Voice Guidance Prompts
256 Uconnect™ ACCESS USER’S MANUAL
Touch this soft-key to enable Voice Guidance Prompts • Navigation Turn-by-Turn Displayed in Cluster
during route guidance. Touch and release the soft-key
Touch this soft-key to enable navigation turn-by-turn
until a check-mark appears, showing the setting has been
displayed in vehicles cluster during route guidance.
selected.
Touch and release the soft-key until a check-mark ap• Nav Volume Adjustment
pears, showing the setting has been selected.
Touch the (+) or (-) soft-key to adjust the Nav Voice • TMC Route Mode
Prompt Volume.
Touch this soft-key to change how the Traffic Message
• Lane Recommendation
Channel (TMC) Route Mode functions during route
guidance. Touch the desired soft-key.
Touch this soft-key to enable Lane Recommendation
– Automatic
during route guidance. Touch and release the soft-key
– By Delay Time
until a check-mark appears, showing the setting has been
selected.
– Manual
– Off
• Junction View
Touch this soft-key to enable Junction View during route • TMC Avoidance Types
guidance. Touch and release the soft-key until a check- Touch this soft-key to display the available Traffic Mesmark appears, showing the setting has been selected.
sage Channel (TMC) Avoidance Types you would like
Uconnect™ ACCESS USER’S MANUAL
257
displayed while in route guidance. Touch and release the
desired selection soft-key until a check-mark appears,
showing the setting has been selected.
NOTE: You can touch the back arrow soft-key to return
to the previous screen or the X soft-key to exit.
Information
From the Nav Main Menu, touch the Information softkey and select one of the following options to view
additional information.
• Traffic
• Where Am I?
• Trip Computer
258 Uconnect™ ACCESS USER’S MANUAL
NOTE: You can touch the back arrow soft-key to return Where Am I? displays the address and GEO Coordinates
of your current location.
to the previous screen or the X soft-key to exit.
Information – Where Am I?
• Touch the GPS soft-key to view the GPS information.
• Touch the Save soft-key to save the location in your
Favorites.
NOTE: You can touch the back arrow soft-key to return
to the previous screen or the X soft-key to exit.
Information – Trip Computer
To select Where Am I? information, touch the Information soft-key from the Nav Main Menu and then touch
the Where Am I? soft-key.
Uconnect™ ACCESS USER’S MANUAL
259
• Distance to final Destination
• Vehicle Speed
• Distance Traveled
• Overall average speed
• Moving average speed
• Maximum speed reached
• Total time traveled
• Travel time spent moving
• Travel time spent stopped
To select Trip Computer information, touch the Information soft-key from the Nav Main Menu and then touch NOTE: You can touch the back arrow soft-key to return
to the previous screen or the X soft-key to exit.
the Trip Computer soft-key.
Trip Computer displays the following trip information Emergency
from your last trip
• Travel Direction
260 Uconnect™ ACCESS USER’S MANUAL
• Fire Department – Search and route a Fire Department
close to your current location
Touch the Location soft-key to display your exact current
location.
Touch the Save soft-key to save your current location in
Favorites.
NOTE: You can touch the back arrow soft-key to return
to the previous screen or the X soft-key to exit.
Emergency – Hospital
From the Nav Main Menu, touch the Emergency soft-key
and touch one of the following options to search and
route to a specific location.
• Hospital – Search and route to a Hospital close to your
current location
• Police – Search and route to a Police Station close to
your current location
Uconnect™ ACCESS USER’S MANUAL
261
• Distance
• ABC (Search)
NOTE: In case of emergency, please contact the facility
to verify their availability before proceeding.
Touch the desired Hospital and touch Yes to confirm the
destination.
NOTE:
• If you are currently on a route guidance and you select
a Hospital the system will ask you to choose one of the
following
To search for a Hospital close to your current location,
• Cancel previous route
touch Emergency from the Nav Main Menu and then
• Add as first destination
touch the Hospital soft-key.
• Add as last destination
You can search for a Hospital by the following categories,
• You can touch the back arrow soft-key to return to the
which are soft-key tabs at the top of the screen.
previous screen or the X soft-key to exit.
• Name
262 Uconnect™ ACCESS USER’S MANUAL
Emergency – Police
You can search for a Police Station by the following
categories, which are soft-key tabs at the top of the
screen.
• Name
• Distance
• ABC (Search)
NOTE: In case of emergency, please contact the facility
to verify their availability before proceeding.
Touch the desired Police Station and touch Yes to confirm
the destination.
NOTE: If you are currently on a route guidance and you
To search for a Police Station close to your current select a Police Station the system will ask you to choose
location, touch Emergency from the Nav Main Menu and one of the following
then touch the Police Station soft-key.
• Cancel previous route
• Add as first destination
Uconnect™ ACCESS USER’S MANUAL
• Add as last destination
263
Emergency – Fire Department
You can touch the back arrow soft-key to return to the
previous screen or the X soft-key to exit.
To search for a Fire Department close to your current
location, touch Emergency from the Nav Main Menu and
then touch the Fire Department soft-key.
264 Uconnect™ ACCESS USER’S MANUAL
You can search for a Fire Department by the following • Add as last destination
categories, which are soft-key tabs at the top of the
You can touch the back arrow soft-key to return to the
screen.
previous screen or the X soft-key to exit.
• Name
Security Features
• Distance
The following Security Related options are available:
• ABC (Search)
• 9–1–1 Call
NOTE: In case of emergency, please contact the facility
• Roadside Assistance Call
to verify their availability before proceeding.
Touch the desired Fire Department and touch Yes to Roadside Assistance (If Equipped)
confirm the destination.
If your vehicle is equipped with this feature and within
NOTE: If you are currently on a route guidance and you cellular range, you may be able to connect to Roadside
select a Fire Department the system will ask you to Assistance, Uconnect™ Care and Vehicle Care by pressing the “Assist” button on the Rearview Mirror of your
choose one of the following
vehicle. To the extent any such calls incur additional
• Cancel previous route
• Add as first destination
Uconnect™ ACCESS USER’S MANUAL
265
costs, you are responsible for them. If Roadside Assis- 9–1–1 Call – If Equipped
tance is provided to your vehicle, you agree to be
The 9-1-1 Call system is an embedded phone system that
responsible for any additional roadside assistance service
allows you to connect to a 9-1-1 operator in an emercosts that you may incur.
gency. You can choose to press the 9-1-1 Call button on
In order to provide Uconnect™ Services to you, we may the Rearview Mirror to contact a 9-1-1 operator.
record and monitor your conversations with Roadside
9–1–1 Call Operating Instructions
Assistance, Uconnect™ Care or Vehicle Care, whether
such conversations are initiated through the Uconnect™ 1. Press the 9-1-1 Call button on the Rearview Mirror;
Services in your vehicle, or via a landline or mobile
NOTE: In case the 9-1-1 Call button is pushed in error,
telephone, and may share information obtained through
there will be a 10 second delay before the 9-1-1 Call
such recording and monitoring in accordance with regusystem initiates a call to a 9-1-1 operator. To cancel the
latory requirements. You acknowledge, agree and con9-1-1 Call connection, press the 9-1-1 Call button on the
sent to any recording, monitoring or sharing of informaRearview Mirror or press the cancellation button on the
tion obtained through any such call recordings.
Phone Screen. Termination of the 9-1-1 Call will turn the
green LED light on the Rearview Mirror off.
2. The LED light on the Rearview Mirror will turn green
once a connection to a 9-1-1 operator has been made;
266 Uconnect™ ACCESS USER’S MANUAL
NOTE: Once a connection is made between the vehicle’s
9-1-1 Call system and the 9-1-1 operator, the 9-1-1 operator may be able to open a voice connection with the
vehicle to determine if additional help is needed. Once
the 9-1-1 operator opens a voice connection with the
vehicle’s 9-1-1 Call system, the operator should be able to
speak with you or other vehicle occupants and hear
sounds occurring in the vehicle. The vehicle’s 9-1-1 Call
4. You should be able to speak with the 9-1-1 operator system will attempt to remain connected with the 9-1-1
through the vehicle audio system to determine if operator until the 9-1-1 operator terminates the connection.
additional help is needed.
3. Once a connection between the vehicle and a 9-1-1
operator is made, the 9-1-1 Call system may transmit
the following important vehicle information to a 9-1-1
operator:
• indication that the occupant placed a 9-1-1 Call;
• the vehicle brand; and
• the last known GPS coordinates of the vehicle.
5. The 9-1-1 operator may attempt to contact appropriate
emergency responders and provide them with important vehicle information and GPS coordinates.
Uconnect™ ACCESS USER’S MANUAL
6. If a connection between the vehicle and a 9-1-1 operator is made, the 9-1-1 Call system may transmit certain
vehicle information to a 9-1-1 operator, including the
last known GPS coordinates of your vehicle. If a
connection is made between a 9-1-1 operator and your
vehicle, you understand and agree that 9-1-1 operators
may record conversations and sounds in your car
upon connection and consent to such recordings. Your
vehicle MUST have a working electrical system for the
9-1-1 Call system, among others, to operate. IF YOUR
VEHICLE LOSES BATTERY POWER FOR ANY REASON (INCLUDING DURING OR AFTER AN ACCIDENT) THE 9-1-1 CALL SYSTEM, AMONG OTHER
VEHICLES SYSTEMS, WILL NOT OPERATE.
WARNING!
If anyone in the vehicle could be in danger (e.g., fire
(Continued)
267
WARNING! (Continued)
or smoke is visible, dangerous road conditions or
location), do not wait for voice contact from a 9-1-1
operator. All occupants should exit the vehicle immediately and move to a safe location.
WARNING!
The 9-1-1 Call system is embedded into the vehicle’s
electrical system. Do not add any aftermarket electrical equipment to the vehicle’s electrical system. This
may prevent your vehicle from sending a signal to
initiate an emergency call. To avoid interference that
can cause the 9-1-1 Call system to fail, never add
aftermarket equipment (e.g., two-way mobile radio,
CB radio, data recorder, etc.) to your vehicle’s electrical system or modify the antennas on your vehicle.
268 Uconnect™ ACCESS USER’S MANUAL
9-1-1 Call System Limitations
Vehicles sold in Canada and Mexico DO NOT have 9-1-1
Call system capabilities.
9-1-1 or other emergency line operators in Canada and
Mexico may not answer or respond to 9-1-1 system calls.
If the 9-1-1 Call system detects a malfunction, any of the
following may occur at the time the malfunction is
detected, and at the beginning of each ignition cycle:
• the Rearview Mirror light will continuously be illuminated red;
• The Phone Screen will display the following message
“Vehicle phone requires service. Please contact your
dealer.”; and,
• An In-Vehicle Audio message will state “Vehicle phone
requires service. Please contact your dealer.”
WARNING!
Ignoring the Rearview Mirror light could mean you
will not have 9-1-1 Call services. If the Rearview
Mirror light is illuminated, have an authorized
dealer service the 9-1-1 Call system immediately.
WARNING!
The ORC turns on the Air Bag Warning Light on the
instrument panel if a malfunction in any part of the
system is detected. If the Air Bag Warning Light is
illuminated, the 9-1-1 system may not be able to send
a signal to a 9-1-1 operator. If the Air Bag Warning
Light is illuminated, have an authorized dealer service the ORC system immediately.
Uconnect™ ACCESS USER’S MANUAL
269
Even if the 9-1-1 Call system is fully functional, factors • Operator error by the 9-1-1 operator;
beyond Chrysler Group LLC’s control may prevent or
• Wireless network congestion;
stop 9-1-1 Call system operation. These include, but are
• Weather; and
not limited to, the following factors:
• The ignition key has been removed from the ignition • Buildings, structures, geographic terrain, or tunnels.
and the delayed accessories mode is active;
• The ignition key is in OFF position;
• The vehicle’s electrical systems are not intact;
• The 9-1-1 Call system software and/or hardware are
damaged during a crash;
• The vehicle battery loses power or becomes disconnected during a vehicle crash;
• Wireless and/or Global Positioning Satellite signals
are unavailable or obstructed;
• Equipment malfunction at the 9-1-1 operator facility;
WARNING!
Never place anything on or near the vehicle’s wireless and GPS antennas. You could prevent wireless
and GPS signal reception, which can prevent your
vehicle from placing an emergency call. Wireless and
GPS signal reception is required for the 9-1-1 Call
system to function properly.
270 Uconnect™ ACCESS USER’S MANUAL
WARNING!
Failure to perform scheduled maintenance and regularly inspect your vehicle may result in vehicle damage and/or serious injury.
General Information
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may cause undesired operation.
Remote Service Features
If your vehicle is equipped with Remote Service Features,
for more information, refer to www.MoparOwnerConnect.com or call 855-792-4241.
INDEX
10
2
INDEX
General Information . . . . . . . . . . . . . . . . . . . . .93, 206

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Page Mode                       : UseOutlines
XMP Toolkit                     : 3.1-702
About                           : 9fbc2783-0a22-11ed-0000-d34eedd0a54f
Producer                        : SDL
Keywords                        : XML Professional Publisher (XPP)
Modify Date                     : 2012:08:10 13:34:58-07:00
Create Date                     : 2012:07:19 20:58:36Z
Creator Tool                    : XPP Professional Publisher
Metadata Date                   : 2012:08:10 13:34:58-07:00
Document ID                     : 9fbc2783-0a22-11ed-0000-d34eedd0a54f
Instance ID                     : uuid:0430dd27-aedf-4b38-bb1e-d7c2bb28b177
Format                          : application/pdf
Title                           :  1130540
Creator                         :  Tweddle Group USA
Description                     :   Multimedia Manual
Page Count                      : 272
Subject                         :   Multimedia Manual
Author                          :  Tweddle Group USA
EXIF Metadata provided by EXIF.tools
FCC ID Filing: QNG-BE2800

Navigation menu