Harman Consumer RB85A00RE Remote Control User Manual
Harman Consumer, Inc. Remote Control
User Manual
Important Safety Instructions
For All Products:
1. Read t hese instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7.
Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.
8.
Do not install near any heat sources such as radiators,
heat registers, stoves or other apparatus (including
ampliers) that produce heat.
9. Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades
with one wider than the other. A grounding-type
plug has two blades and a third grounding prong.
The wide blade or the third prong is provided for
your safety. If the provided plug does not t into your
outlet, consult an electrician for replacement of the
obsolete outlet.
10.
Protect the power cord from being walked on or
pinched, particularly at plugs, convenience receptacles
and the point where they exit from the apparatus.
11.
Only use attachments/accessories specied by the
manufacturer.
12.
Use only with the cart, stand, tripod,
bracket or table specied by the
manufacturer or sold with the apparatus.
When a cart is used, use caution when
moving the cart/apparatus combination
to avoid injury from tip-over.
13.
Unplug this apparatus during lightning storms or when
unused for long periods of time.
14.
Refer all servicing to qualied service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as power supply cord or
plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has
been exposed to rain or moisture, does not operate
normally, or has been dropped.
15.
Do not expose this apparatus to dripping or splashing
and ensure that no objects lled with liquids, such as
vases, are placed on the apparatus.
16. To completely disconnect this apparatus from the AC
Mains, disconnect the power supply cord plug from
the AC receptacle.
17.
The mains plug of the power supply cord shall remain
readily operable.
18.
Do not expose batteries to excessive heat such as
sunshine, re or the like.
CAUTION
RISK OF ELECTRIC SHOCK. DO NOT OPEN.
THE LIGHTNING FLASH WITH ARROWHEAD SYMBOL,
WITHIN AN EQUILATERAL TRIANGLE, IS INTENDED TO
ALERT THE USER TO THE PRESENCE OF UNINSULATED
"DANGEROUS VOLTAGE” WITHIN THE PRODUCT’S
ENCLOSURE THAT MAY BE OF SUFFICIENT MAGNITUDE
TO CONSTITUTE A RISK OF ELECTRIC SHOCK TO
PERSONS.
THE EXCLAMATION POINT WITHIN AN EQUILATERAL
TRIANGLE IS INTENDED TO ALERT THE USER TO
THE PRESENCE OF IMPORTANT OPERATING AND
MAINTENANCE SERVICING INSTRUCTIONS IN THE
LITERATURE ACCOMPANYING THE PRODUCT.
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN
OR MOISTURE.
For Products That Transmit
and Receive RF Energy:
FCC Regulations
FCC Information For Users
This device complies with Part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) This device may
not cause harmful interference; and (2) this device must accept
any interference received, including interference that may cause
undesired operation.
Radio and Television Interference
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio-frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular instal-
lation. If this equipment does cause harmful interference to radio
or television reception, which can be determined by turning the
equipment on and o, the user is encouraged to try to correct the
interference by one or more of the following measures:
Increase the separation between the equipment and •
receiver.
Connect the equipment to a dierent outlet so that the equip-
•
ment and receiver are on dierent branch circuits.
Consult the dealer or an experienced radio/ TV technician
•
for help.
NOTE:
Changes or modications not expressly approved by
Harman could void the user’s authority to operate the equip-
ment.
IC Statement and Warning
For Canadian Model
This Class B digital apparatus complies with Canadian
ICES-003.
Modèle pour les Canadien
Cet appareil numérique de la classe B est conforme à la
norme NMB-003 du Canada.
For Products with Radio
Receivers That Can Use an
External Antenna:
CATV or Antenna Grounding
If an outside antenna or cable system is connected to this product,
be certain that it is grounded so as to provide some protection
against voltage surges and static charges. Section 810 of the
National Electrical Code, ANSI/NFPA No. 70-1984, provides informa-
tion with respect to proper grounding of the mast and supporting
structure, grounding of the lead-in wire to an antenna discharge
unit, size of grounding conductors, location of antenna discharge
unit, connection to grounding electrodes and requirements of the
grounding electrode.
Note to CATV System Installer:
This reminder is provided to call the CATV (cable TV) system
installer’s attention to article 820-40 of the NEC, which provides
guidelines for proper grounding and, in particular, species that
the cable ground shall be connected to the grounding system of
the building, as close to the point of cable entry as possible.
0233CSK - HK BDS Systems Safety Sheet v2.indd 1 02/08/10 15:15:05
CLASS 1 LASER PRODUCT
KLASSE 1 LASER PRODUCT
LUOKAN 1 LAER LAITE
KLA SS 1 LAS ER APPARAT
CLASSE 1 PRODUIT LASER
Caution:
This product uses a laser system. To prevent direct exposure to
the laser beam, do not open the cabinet enclosure or defeat
any of the safety mechanisms provided for your protection. DO
NOT STARE INTO THE LASER BEAM. To ensure proper use of this
product, please read the owner’s manual carefully and retain it for
future use. Should the unit require maintenance or repair, please
contact your local Harman Kardon service center. Refer servicing
to qualied personnel only.
Harman Consumer, Inc.
8500 Balboa Boulevard, Northridge, CA 91329 USA
516.255.4545 (USA only)
Made in P.R.C.
©
2010 Harman International Industries, Incorporated. All rights reserved.
Harman Kardon is a trademark of Harman International Industries, Incorporated, registered in the United States and/or other countries.
Blu-ray Disc is a trademark of the Blu-ray Disc Association.
Features, specications and appearance are subject to change without notice.
Instructions for users on removal and disposal
of used batteries.
Specification of included battery types.
These symbols shown on the product, the packaging or in the
manual or separate information sheet mean that the product itself,
as well as the batteries included or built into the product, should
never be thrown away with general household waste. Take them
to applicable collection points, where proper treatment, recycling
and recovery takes place, in accordance with national or local
legislation, or European Directives 2002/96/EC and 2006/66/EC.
Correct handling of the product and batteries to be disposed
helps save resources and prevents possible negative eects on
the environment or human health.
The batteries included with your equipment may be Alkaline,
Carbon Zinc/Manganese or Lithium (button cells) type. All types
should be disposed of according to the above instructions.
To remove the batteries from your equipment or remote control,
reverse the procedure described for inserting batteries in the
Owners Manual.
For products with a built-in battery that lasts for the lifetime of
the product, removal may not be possible for the user. In this
case, recycling or recovery centers handle the dismantling of
the product and the removal of the battery. If, for any reason, it
becomes necessary to replace such a battery, this procedure must
be performed by authorized service centers.
For CD/DVD/Blu-ray Disc™
Players:
For Products That Include
Batteries:
0233CSK - HK BDS Systems Safety Sheet v2.indd 2 02/08/10 15:15:06