Harman Consumer RB85A00RE Remote Control User Manual
Harman Consumer, Inc. Remote Control
User Manual
Important Safety Instructions For All Products: 1. Read t hese instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with a dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves or other apparatus (including amplifiers) that produce heat. 9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 10. Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles and the point where they exit from the apparatus. 11. Only use attachments/accessories specified by the manufacturer. 12. Use only with the cart, stand, tripod, bracket or table specified by the manufacturer or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 13. Unplug this apparatus during lightning storms or when unused for long periods of time. 14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. 15. Do not expose this apparatus to dripping or splashing and ensure that no objects filled with liquids, such as vases, are placed on the apparatus. 16. To completely disconnect this apparatus from the AC Mains, disconnect the power supply cord plug from the AC receptacle. 17. The mains plug of the power supply cord shall remain readily operable. 18. Do not expose batteries to excessive heat such as sunshine, fire or the like. 0233CSK - HK BDS Systems Safety Sheet v2.indd 1 CAUTION RISK OF ELECTRIC SHOCK. DO NOT OPEN. THE LIGHTNING FLASH WITH ARROWHEAD SYMBOL, WITHIN AN EQUILATERAL TRIANGLE, IS INTENDED TO ALERT THE USER TO THE PRESENCE OF UNINSULATED "DANGEROUS VOLTAGE” WITHIN THE PRODUCT’S ENCLOSURE THAT MAY BE OF SUFFICIENT MAGNITUDE TO CONSTITUTE A RISK OF ELECTRIC SHOCK TO PERSONS. • Increase the separation between the equipment and receiver. • Connect the equipment to a different outlet so that the equipment and receiver are on different branch circuits. • Consult the dealer or an experienced radio/ TV technician for help. NOTE: Changes or modifications not expressly approved by Harman could void the user’s authority to operate the equipment. IC Statement and Warning For Canadian Model This Class B digital apparatus complies with Canadian ICES-003. THE EXCLAMATION POINT WITHIN AN EQUILATERAL TRIANGLE IS INTENDED TO ALERT THE USER TO THE PRESENCE OF IMPORTANT OPERATING AND MAINTENANCE (SERVICING) INSTRUCTIONS IN THE LITERATURE ACCOMPANYING THE PRODUCT. WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE. For Products That Transmit and Receive RF Energy: FCC Regulations FCC Information For Users This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference; and (2) this device must accept any interference received, including interference that may cause undesired operation. Radio and Television Interference This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio-frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment on and off, the user is encouraged to try to correct the interference by one or more of the following measures: Modèle pour les Canadien Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. For Products with Radio Receivers That Can Use an External Antenna: CATV or Antenna Grounding If an outside antenna or cable system is connected to this product, be certain that it is grounded so as to provide some protection against voltage surges and static charges. Section 810 of the National Electrical Code, ANSI/NFPA No. 70-1984, provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna discharge unit, connection to grounding electrodes and requirements of the grounding electrode. Note to CATV System Installer: This reminder is provided to call the CATV (cable TV) system installer’s attention to article 820-40 of the NEC, which provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as possible. 02/08/10 15:15:05 For CD/DVD/Blu-ray Disc™ Players: For Products That Include Batteries: Correct handling of the product and batteries to be disposed helps save resources and prevents possible negative effects on the environment or human health. CLASS 1 LASER PRODUCT KLASSE 1 LASER PRODUCT LUOKAN 1 LAER LAITE KLASS 1 LASER APPARAT CLASSE 1 PRODUIT LASER Caution: This product uses a laser system. To prevent direct exposure to the laser beam, do not open the cabinet enclosure or defeat any of the safety mechanisms provided for your protection. DO NOT STARE INTO THE LASER BEAM. To ensure proper use of this product, please read the owner’s manual carefully and retain it for future use. Should the unit require maintenance or repair, please contact your local Harman Kardon service center. Refer servicing to qualified personnel only. The batteries included with your equipment may be Alkaline, Carbon Zinc/Manganese or Lithium (button cells) type. All types should be disposed of according to the above instructions. Instructions for users on removal and disposal of used batteries. Specification of included battery types. These symbols shown on the product, the packaging or in the manual or separate information sheet mean that the product itself, as well as the batteries included or built into the product, should never be thrown away with general household waste. Take them to applicable collection points, where proper treatment, recycling and recovery takes place, in accordance with national or local legislation, or European Directives 2002/96/EC and 2006/66/EC. To remove the batteries from your equipment or remote control, reverse the procedure described for inserting batteries in the Owners Manual. For products with a built-in battery that lasts for the lifetime of the product, removal may not be possible for the user. In this case, recycling or recovery centers handle the dismantling of the product and the removal of the battery. If, for any reason, it becomes necessary to replace such a battery, this procedure must be performed by authorized service centers. Harman Consumer, Inc. 8500 Balboa Boulevard, Northridge, CA 91329 USA 516.255.4545 (USA only) Made in P.R.C. © 2010 Harman International Industries, Incorporated. All rights reserved. Harman Kardon is a trademark of Harman International Industries, Incorporated, registered in the United States and/or other countries. Blu-ray Disc is a trademark of the Blu-ray Disc Association. Features, specifications and appearance are subject to change without notice. 0233CSK - HK BDS Systems Safety Sheet v2.indd 2 02/08/10 15:15:06
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes XMP Toolkit : Adobe XMP Core 4.2.2-c063 53.352624, 2008/07/30-18:05:41 Instance ID : uuid:cdd41bfe-eb39-8c4c-9973-9ea0f3b300e0 Document ID : adobe:docid:indd:47f63c61-974d-11df-ad56-bab1bb65250d Rendition Class : proof:pdf Derived From Instance ID : 1c85294a-9716-11df-ac95-ac2239965daf Derived From Document ID : adobe:docid:indd:1bff8c14-9665-11df-8ce0-e86870dbd4c6 Create Date : 2010:08:02 15:15:05+02:00 Modify Date : 2011:06:15 15:06:50-07:00 Metadata Date : 2011:06:15 15:06:50-07:00 Creator Tool : Adobe InDesign CS3 (5.0.4) Thumbnail Width : 204 Thumbnail Height : 256 Thumbnail Format : JPEG Thumbnail Image : (Binary data 10986 bytes, use -b option to extract) Format : application/pdf Producer : Adobe PDF Library 8.0 Trapped : False N Pages : 1 Has Visible Transparency : False Has Visible Overprint : True Max Page Size W : 9.160760 Max Page Size H : 11.660760 Max Page Size Unit : Inches Font Name : Helvetica, MyriadPro-Regular, MyriadPro-SemiboldCond, MyriadPro-Cond Font Family : Helvetica, Myriad Pro, Myriad Pro, Myriad Pro Font Face : Regular, Regular, Semibold Condensed, Condensed Font Type : TrueType, Open Type, Open Type, Open Type Font Version : 6.1d18e1, Version 2.037;PS 2.000;hotconv 1.0.51;makeotf.lib2.0.18671, OTF 1.006;PS 001.000;Core 1.0.23;hotunix 1.28, Version 2.037;PS 2.000;hotconv 1.0.51;makeotf.lib2.0.18671 Font Composite : False, False, False, False Font File Name : Helvetica.dfont, MyriadPro-Regular.otf, MyriadPro-SemiboldCond.otf, MyriadPro-Cond.otf Plate Names : Black Swatch Group Name : Default Swatch Group Swatch Group Type : 0 Page Count : 2 Creator : Adobe InDesign CS3 (5.0.4)EXIF Metadata provided by EXIF.tools