Harman Consumer RD0200SZ RF Remote Control User Manual
Harman Consumer, Inc. RF Remote Control
User Manual
jbl six button remote RF Remote control User Guide English Deutsch Français Español Italiano English Important Safety Instructions Please read the following operation precautions before use: • Read these instructions. • Keep these instructions. • Heed all warnings. • Follow all instructions. • Do Not use this apparatus near water. • Clean only with dry cloth. • Do Not block any ventilation openings. Install in accordance with the manufacturer’s instructions. • Do Not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. • Do Not defeat the safety purpose of the polarized or grounding type plug. A polarizing plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or third prong, are provided for safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. • Protect the power cord from being walked on or pinched particularly at the plugs, convenience receptacles, and at the point where they exit from the apparatus. • Only use attachments/accessories specified by the manufacturer. • Unplug this apparatus during lightning storms or when unused for long periods of time. • Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. • TO PREVENT THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK). THERE ARE NO USER SERVICEABLE PARTS INSIDE THIS UNIT, PLEASE REFER SERVICING TO QUALIFIED HARMAN JBL CORPORATION SERVICE PERSONNEL. • Never remove grille covers in order to service the speaker system. The speaker system does not contain any user serviceable parts. Refer all servicing to the JBL Technical Support Group. Important Note For All Electronic Products: Before inserting or unplugging audio cables from the source device’s headphones or line-level output jacks. it is good practice to turn off the device. This will prolong the life of your unit, help protect your device from static electricity. and avoid potential damage. WARNING: To prevent fire or electrical shock hazard, DO NOT expose this product to rain or moisture. WARNING: The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquid, such as vases, drinking glasses and so forth, shall be placed on the apparatus. WARNING: The apparratus may be static sensitive in some circumstances and may have to be reset after suffering an electrostatic discharge CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN THE LIGHTNING FLASH AND ARROWHEAD WITHIN THE TRIANGLE IS A WARNING SIGN ALERTING YOU OF DANGEROUS VOLTAGE INSIDE THE PRODUCT CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER. NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. THE EXCLAMATION POINT WITHIN THE TRIANGLE IS A WARNING SIGN ALERTING YOU OF IMPORTANT INSTRUCTIONS ACCOMPANYING THE PRODUCT. SEE MARKING ON BOTTOM OF PRODUCT REGULATORY FCC Statement and Warning This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions; 1) This device may not cause interference 2) This device must accept interference, including interference that may cause undesired operation of the device IC Statement and Warning: Operation is subject to the following two conditions; 1) This device may not cause interference 2) This device must accept interference, including interference that may cause undesired operation of the device MODIFICATIONS NOT EXPRESSLY APPROVED BY THE MANUFACTURER COULD VOID THE USER AUTHORITY TO OPERATE THE EQUIPMENT UNDER FCC RULES. Music Browsing Before proceeding, make sure the iPod® is securely docked to your JBL product. Music Control Mode is indicated by BLUE light. iPod® Navigation Mode is indicated by AMBER light. Music Control Mode Turn iPod® On: Turn iPod® Off: Play a Track: Pause a Track: Skip to Next Track: Skip to Previous Track: Fast Advance Track: Fast Reverse Track: Increase Volume: Decrease Volume: Mute: Change to iPod® Mode: Press any button on the remote control to wake the iPod®. Press and hold the Play/Pause button for 2 seconds. Press the Play/Pause button. Note: If the iPod® is at the Main Menu, pressing Play/Pause will cause the iPod® to start playing al of its music. Press the Play/Pause button while a song is playing. Press the Forward button. Press the Reverse button. Press and hold the Forward button. Press and hold the Reverse button. Press the Volume Up button. Press the Volume Down button. Press the Volume Up and Volume Down buttons at the same time. Press the Mode button. iPod® Mode Turn iPod® On: Turn iPod® Off: Scroll iPod® Cursor Up: Scroll iPod® Cursor Down: Go to Previous Menu: Select Menu/Track/Feature: Change to Navigation Mode: Press any button on the remote control to wake the iPod®. Press and hold the Play/Pause button for 2 seconds. Press the Reverse button. Press the Forward button. Press the Volume Down button. Press the Volume Up button. Press the Mode button. Troubleshooting SYMPTOM POSSIBLE PROBLEM SOLUTION The remote battery power may be low. Redock the iPod. If problem persists, reset the iPod. NOTE Command Transmission iPod does not respond to remote commands. Replace battery. Remote only operates at close range. Technical Specifications Transmission: Frequency: Operating Range: Battery: Dimensions: Weight (Including Battery): The remote range is up to 20 feet. Move the source unit closer to the remote. The remote battery power may be low. Replace the battery. Radio Frequency 2.4 GHz Up to 20 ft. CR2032 3V 2-7/8” x 2-1/4” x 5/8” 1.2 oz. Battery Replacement The JBL remote’s battery should last a year under normal usage. To replace the battery, release the battery cover on the back of the remote and replace the old battery with a CR2032 type battery or equivalent.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Page Count : 5 XMP Toolkit : XMP toolkit 2.9.1-13, framework 1.6 About : uuid:77fe6189-7f31-406a-9343-ac4166d7365e Producer : Adobe PDF Library 7.0 Trapped : False Create Date : 2006:04:04 17:53:51-07:00 Modify Date : 2006:04:05 13:25:46-07:00 Metadata Date : 2006:04:05 13:25:46-07:00 Creator Tool : Adobe InDesign CS2 (4.0) Thumbnail Format : JPEG Thumbnail Width : 256 Thumbnail Height : 256 Thumbnail Image : (Binary data 6391 bytes, use -b option to extract) Instance ID : uuid:0e8dda85-e046-41e0-b224-5be0e0c6ab33 Rendition Class : proof:pdf Document ID : adobe:docid:indd:a10d1984-c331-11da-a488-d45987150c4c Derived From Instance ID : a10d1983-c331-11da-a488-d45987150c4c Derived From Document ID : adobe:docid:indd:3b12fe27-be89-11da-9eeb-f381959ecf9e Manifest Link Form : ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream Manifest Placed X Resolution : 72.00, 72.00, 72.00, 72.00 Manifest Placed Y Resolution : 72.00, 72.00, 72.00, 72.00 Manifest Placed Resolution Unit : Inches, Inches, Inches, Inches Manifest Reference Instance ID : uuid:91AABD05BCEA11DA83EFBE85CD42CB66, uuid:91AABD08BCEA11DA83EFBE85CD42CB66, uuid:91AABD02BCEA11DA83EFBE85CD42CB66, uuid:80CADEDEBCEA11DA83EFBE85CD42CB66 Manifest Reference Document ID : uuid:1B76EE72BCEA11DAA0849F0459464966, uuid:94297AD6BCE911DAB3A3860E7C35CB8B, uuid:50775B2DBCEA11DAA0849F0459464966, uuid:E214CE83BCE911DAB3A3860E7C35CB8B Format : application/pdf Tagged PDF : Yes Creator : Adobe InDesign CS2 (4.0)EXIF Metadata provided by EXIF.tools