Harman BE2820 Automotive Infotainment Unit w/ Bluetooth, GPS and WLAN User Manual 1

Harman International Industries, Inc. Automotive Infotainment Unit w/ Bluetooth, GPS and WLAN Users Manual 1

Users Manual-1

This supplement contains explanations and instructions for correctly operating the following systems. · Navigation System · Audio and Visual System · Handsfree System · APPSIf your vehicle contains one of the systems above, be sure to check the contents of this supplement carefully.If you transfer the ownership of the vehicle to another person, make sure that this supplement is provided with the Owner's Manual inside the vehicle.The information, specications and illustrations in this supplement are valid at the time of publication. Fuji Heavy Industries reserves the right to change the specications and design without prior notice, with no obligation to perform the same or equivalent changes to vehicles sold in the past.This Owner's Manual supplement applies to all models, and describes all devices, including manufacturer-installed options. This means that information may be included about devices that are not installed in your vehicle.Refer to P.14 for details on each of the dierent models. SUBARU STARLINK is the “in-car connectivity system” available on select Subaru vehicles.FUJI HEAVY INDUSTRIES LTD., TOKYO, JAPAN is a registered trademark of Fuji Heavy Industries Ltd.©Copyright 2016, Fuji Heavy Industries Ltd.Foreword
1TABLE OF CONTENTS1QUICK GUIDE 172BASIC FUNCTION 333SETTINGS 534PHONE 735APPS 916AUDIO 1137NAVIGATION SYSTEM (TYPE A ONLY) 1598Siri/VOICE RECOGNITION SYSTEM 1899APPENDIX/WHAT TO DO IF/INDEX 203*:Pandora is available in the United States, Australia, and New Zealand. 1 QUICK GUIDE· MAIN PRODUCT FEATURES... 18 · BASIC FUNCTION... 20 · STEERING SWITCHES... 32 2 BASIC FUNCTION· BASIC INFORMATION BEFORE OPERATION... 34 · REAR VIEW CAMERA... 47 6 AUDIO· BASIC OPERATION... 114 · RADIO OPERATION... 118 · MEDIA OPERATION... 134 · AUDIO REMOTE CONTROLS... 147 · TIPS FOR OPERATING THE AUDIO SYSTEM... 149 4 PHONE· PHONE OPERATION... 74 5 APPS· SUBARU STARLINK (TYPE A/B ONLY)... 95 · MirrorLinkTM (TYPE A/B ONLY)... 96 · ahaTM... 98 · Pandora®*... 102 · Apple Carplay... 105 · Android Auto... 107 · TravelLink (TYPE A/B ONLY)... 109 3 SETTINGS· Bluetooth® SETTINGS... 54 · OTHER SETTINGS... 62 7 NAVIGATION SYSTEM (TYPE A ONLY)· NAVIGATION... 159 8 Siri/VOICE RECOGNITION SYSTEM· Siri... 190 · VOICE RECOGNITION SYSTEM OPERATION... 193 · COMMAND LIST... 197 9 APPENDIX / WHAT TO DO IF / INDEX· MAP DATABASE INFORMATION AND UPDATES (TYPE A ONLY)... 204 · TROUBLESHOOTING... 213 · ERROR MESSAGES... 219 · INDEX... 226
INTRODUCTION2INTRODUCTIONINTRODUCTIONThe symbols described below are found in this instruction manual as well as on the unit itself to insure its proper and safe usage and to prevent injury or damage to property. Make sure you understand the meaning of these symbols before reading the rest of this manual.READ FIRSTWe recommend that you wait until the positioning stabilizes before starting to drive.If you start to drive while the positioning is not complete, the indicated position may differ from the actual vehicle position. We recommend waiting until the GPS indicator displays before starting to drive.The screens shown in this manual may differ from the actual screens depending on the data type or when the map data was created.When maps are created, land surveys are conducted and information on road improvements and reopening is collected to provide the most accurate information possible. However, modications to roads, place names and facilities may be carried out at any time. Consequently, we cannot guarantee that map data contains no errors in road positions, conguration and names, or in facility names.
INTRODUCTIONINTRODUCTION3Information in this manual that must be observed for the unit, and information that is useful to know is indicated as follows.WARNING lThis sign indicates a situation in which incorrect handling through disregard of written information might result in death or serious personal injury.CAUTION lThis sign indicates a situation in which incorrect handling through disregard of written information might result in personal injury or damage to property.NOTE lUseful information for the user is described. lBe sure to read all materials such as manuals and warranties that come with the product. Fuji Heavy Industries is not responsible for problems that arise due to failure to follow these instructions. lChanges to product specications may result in differences between the content of the manual and the features of the unit.SYMBOLS USED IN ILLUSTRATIONSSafety symbolThe symbol of a circle with a slash through it means “Do not”, “Do not do this” or “Do not let this happen”.Arrows indicating operations Indicates the action (pushing, turning, etc.) used to operate switches and other devices.
INTRODUCTION4PRECAUTIONS FOR USEWARNING lThe main unit requires a 12 V DC power supply. The main unit should not be installed in any vehicle which does not have a 12 V power system with a ground-connected negative side. An installation other than the one intended may cause severe damage to the main unit, and electric shock or serious injury to the users. lEven when using the route guidance of the navigation system, be sure to drive by following the actual trafc regulations. If you drive by following only the route guidance of the navigation system, you may violate the actual trafc regulations and cause a trafc accident. lTo ensure safety, the driver should not operate the navigation system while driving. Operating the navigation system while driving may result in an accidental steering wheel operation or otherwise cause an accident. Stop the vehicle before operating the navigation system. Also, do not watch the screen while driving because doing so may be dangerous (ETC). Inattention to road conditions ahead may result in an accident. lThe driver should not perform operations such as volume adjustment while driving. Inattention to road conditions ahead may result in an accident, so be sure to stop the vehicle in a safe place before performing the operation. lType A/B only: The driver should not change discs while driving. Inattention to road conditions ahead may result in an accident, so be sure to stop the vehicle in a safe place before performing the operation. lThe driver should not perform operations such as adding a location or setting the memory while driving. Inattention to road conditions ahead may result in an accident, so be sure to stop the vehicle in a safe place before performing the operation. lBefore viewing a video, be sure to stop the vehicle in a safe place and apply the parking brake. To ensure safety, videos are not displayed during driving. lTo ensure safety, never operate a cell phone while driving. lType A/B only: Do not let foreign objects enter the disc slot. Doing so may result in a re or electric shock. lDo not disassemble or modify the unit. Doing so may result in an accident, re or electric shock. lDo not let water or foreign objects enter the internal parts of the unit. Doing so may result in smoke, re or an electric shock. lDo not use the unit when it is malfunctioning, such as when the screen is not lit or no sound comes out. Doing so may result in an accident, re or electric shock. lAlways replace fuses with fuses of the same specied capacity (amperage). Using a fuse with a higher capacity than the specication may result in a re. lIf a foreign object or water enters the unit, smoke or a strange odor may be emitted. If such an abnormality occurs, stop using the unit immediately and contact your SUBARU dealer. An accident, re or electric shock may result if you continue to use the unit under these conditions. lIn a thunderstorm, do not touch the antenna line or the unit. Lightning may cause an electric shock. lDo not park or stop in prohibited areas to use the unit.
INTRODUCTIONINTRODUCTION5 lIf direct sunlight shines into the vehicle, light may reect off the product. Be very careful while driving. lNever use headphones or earphones while driving. Driving while not being able to hear sounds from outside the vehicle may result in a trafc accident.CAUTION lAlthough the unit can be used when the ignition switch is set to either “ACC” or “ON” position, to protect the battery, start the engine before using the unit. lDo not use the unit anywhere other than in a vehicle. Doing so may result in an electric shock or other injury. lWhile driving, keep the volume low enough for you to hear outside sounds. Driving while not being able to hear sounds from outside the vehicle may result in an accident. lBe careful of the volume when turning on the power. If a loud noise is emitted suddenly when you turn on the power, it may damage your hearing. lDo not apply a strong force to the display. Doing so may result in a malfunction. lType A/B only: Do not put your ngers or hands into the disc slot. Doing so may result in an injury. lDo not touch the hot parts of the unit. The hot parts may burn you. lDo not use while there is an abnormality such as sound breakup or distortion. Doing so may result in a re. lUsing the unit during extremely high or low temperature may result in mistaken operation or a malfunction. In particular, the temperature inside the vehicle can often rise to a high level during the summer. Cool the vehicle, for example by opening a window, before using the unit. lBe careful if metal or water enters the unit, or the unit is exposed to a strong impact, because it may result in a malfunction. lThe touch buttons on the display screen may not operate correctly if condensation forms inside them. If this happens, do not attempt to operate the switches until the condensation has disappeared. lIf juice or similar liquid is spilled on the display, wipe off immediately. Failure to do so may result in product malfunction. lThe screen is easily marked by ngerprints and tends to attracts dust, and should therefore be cleaned occasionally. When cleaning, turn off the power, and wipe lightly with a soft, dry cloth. To remove dirt, soak a soft cloth in neutral detergent and squeeze well before wiping. Do not use a wet oor-cloth, organic solvents (benzene, ethanol, thinner, etc.), acids, or alkalis. Using such agents will result in screen deterioration. Furthermore, do not hit the screen or rub it with hard objects.
INTRODUCTION6NOTE lFuji Heavy Industries is not responsible for any damages to the purchaser or third parties that occur from using the map data. lWe do not provide any replacements or refunds for any mistakes there may be in the map data displays or contents, such as misspelling, omissions or misaligned positions. lFuji Heavy Industries makes no guarantee that the functions included in the map data will be appropriate for the specic objectives of the purchaser. lFunctions that cannot be operated while driving have their colors toned down when the vehicle is being driven, and their operation is disabled. Touching a disabled switch may result in the display of an operation prohibited message on the screen. lType A/B only: During strong vibrations, such as when driving on a poor road surface, the unit may no longer be able to read the data from the disc, and it will not operate correctly. When the vibration lessens, normal operation will return after a short time. lType A/B only: Immediately after turning on the heater when the temperature is low, dew (water drops) may adhere to the lens of the CD reader (condensation). If this happens, leaving the unit for about an hour should remove the condensation and return the unit to normal operation. If the unit does not return to normal operation even after several hours, contact your SUBARU dealer. lWhen using the unit for the rst time after purchase, or after the battery was removed for a long time, the current position may not be displayed correctly. Wait a short time until the GPS positioning corrects the displayed position. lThis device is precision-engineered equipment and the recorded data can be lost as a result of static electricity, electrical noise, vibration, or other inuences. To protect the device against data loss, we recommend keeping a separate record of the data that you record after purchase.NOTE lThe screen may be adversely affected or disturbed by noise if electrical equipment that generates powerful electrical noise is used near the system. In such cases, keep the electrical equipment at a distance, or refrain from use. lThe display may appear brighter when the temperature is low, or immediately after starting the engine, however, this is a characteristic of the LED elements, and does not indicate a fault. The display will return to its original brightness when the vehicle cabin has warmed up. lWhen you look at the screen through polarized material such as polarized sunglasses, the screen may be dark and hard to see. If so, look at the screen from different angles, adjust the screen settings on the general settings screen or take off your sunglasses. lIt may be difcult to view the screen if the display is exposed to sunlight from an awkward angle. lThe LCD screen may not function normally if covered with a protective lm. Do not afx a protective lm. lThe touch panel may function incorrectly or fail to respond if operated with objects other than ngers (nails, operation when wearing gloves, pens, etc.) lType A/B only: When inserting or removing CDs, take care not to touch the touch panel. The touch panel will respond if inadvertently touched by hand. lIf the system functions unexpectedly such as an area other than the one touched being selected, or failure to respond when touched, there is a possibility that another nger or part of the hand is in contact with display. lScratches on the system panel surface are easily noticeable, and it should therefore be handled with care.
INTRODUCTIONINTRODUCTION7SAFETY INSTRUCTION (TYPE B/C ONLY)To use this system in the safest possible manner, follow all the safety tips shown below.Do not use any feature of this system to the extent it becomes a distraction and prevents safe driving. The rst priority while driving should always be the safe operation of the vehicle. While driving, be sure to observe all trafc regulations.Prior to the actual use of this system, learn how to use it and become thoroughly familiar with it. Read the entire manual to make sure you understand the system. Do not allow other people to use this system until they have read and understood the instructions in this manual.For your safety, some functions may become inoperable when driving. Unavailable screen buttons are dimmed.WARNING lFor safety, the driver should not operate the system while he/she is driving. Insufcient attention to the road and trafc may cause an accident.SAFETY INSTRUCTION (TYPE A ONLY)To use this system in the safest possible manner, follow all the safety tips shown below.This system is intended to assist in reaching the destination and, if used properly, can do so. The driver is solely responsible for the safe operation of your vehicle and the safety of your passengers.Do not use any feature of this system to the extent it becomes a distraction and prevents safe driving. The rst priority while driving should always be the safe operation of the vehicle. While driving, be sure to observe all trafc regulations.Prior to the actual use of this system, learn how to use it and become thoroughly familiar with it. Read the entire manual to make sure you understand the system. Do not allow other people to use this system until they have read and understood the instructions in this manual.For your safety, some functions may become inoperable when driving. Unavailable screen buttons are dimmed. Only when the vehicle is not moving, can the destination and route selection be done.
INTRODUCTION8WARNING lFor safety, the driver should not operate the system while he/she is driving. Insufcient attention to the road and trafc may cause an accident. lWhile driving, be sure to obey the trafc regulations and maintain awareness of the road conditions. If a trafc sign on the road has been changed, route guidance may not have the updated information such as the direction of a one way street.While driving, listen to the voice instructions as much as possible and glance at the screen briey and only when it is safe. However, do not totally rely on voice guidance. Use it just for reference. If the system cannot determine the current position correctly, there is a possibility of incorrect, late, or non-voice guidance.The data in the system may occasionally be incomplete. Road conditions, including driving restrictions (no left turns, street closures, etc.) frequently change. Therefore, before following any instructions from the system, look to see whether the instruction can be done safely and legally.This system cannot warn about such things as the safety of an area, condition of streets, and availability of emergency services. If unsure about the safety of an area, do not drive into it. Under no circumstances is this system a substitute for the driver’s personal judgement.Use this system only in locations where it is legal to do so. Some states/provinces may have laws prohibiting the use of video and navigation screens next to the driver.
INTRODUCTIONINTRODUCTION9HOW TO READ THIS MANUALNo. Name DescriptionOperational Outlines An outline of the operation is explained.Main Operations The steps of an operation are explained.Supplemental information Describes supplemental information relating to main operation. ●When a panel button should be selected, button names are shown as . ●When a touch button on the screen should be selected, button names are shown as .
MEMO10
MEMO11
MEMO12
131Quick Guide1
SYSTEM TYPES8-inch touch screenDisplay audio with Navigation system8-inch touch screenDisplay audio system6.5-inch touch screenDisplay audio systemThis manual describes the following three operation methods.Note that all of the descriptions in the manual are based on Type A.SYSTEM TYPESType A Type B Type C- 8-inch display- button- CD slotFeatures:MAIN FUNCTIONSCD slot8-inch displaybuttonNavigation systemAppsAM/FM radioHD radioSiriusXM® satellite radioMedia operationPhone (Bluetooth 3.0)Voice recognition systemNFCLink to meter/MFDSteering switchesRear view cameraFunction Page2428261201242219364623247CD:134 USB:136 iPod:139Bluetooth audio:141 AUX:145Type ASYSTEM TYPES14
8-inch touch screenDisplay audio with Navigation system8-inch touch screenDisplay audio system6.5-inch touch screenDisplay audio systemThis manual describes the following three operation methods.Note that all of the descriptions in the manual are based on Type A.SYSTEM TYPESType A Type B Type C- 8-inch display- button- CD slotFeatures:MAIN FUNCTIONSCD slot8-inch displaybuttonNavigation systemAppsAM/FM radioHD radioSiriusXM® satellite radioMedia operationPhone (Bluetooth 3.0)Voice recognition systemNFCLink to meter/MFDSteering switchesRear view cameraFunction Page2428261201242219364623247CD:134 USB:136 iPod:139Bluetooth audio:141 AUX:145Type ASYSTEM TYPES151Quick Guide
- 8-inch display- button- CD slotType B MAIN FUNCTIONSFeatures:AppsAM/FM radioHD radioSiriusXM® satellite radioMedia operationPhone (Bluetooth 3.0)Voice recognition systemNFCLink to meter/MFDSteering switchesRear view cameraFunction Page28261201242219364623247CD:134 USB:136 iPod:139Bluetooth audio:141 AUX:145CD slot8-inch displaybuttonUSB:136 iPod:139Bluetooth audio:141 AUX:145- 6.5-inch display- buttonType C MAIN FUNCTIONSFeatures:AppsAM/FM radioMedia operationPhone (Bluetooth 2.1)Voice recognition systemSteering switchesRear view cameraFunction Page28262219332476.5-inch displaybuttonSYSTEM TYPES16
- 8-inch display- button- CD slotType B MAIN FUNCTIONSFeatures:AppsAM/FM radioHD radioSiriusXM® satellite radioMedia operationPhone (Bluetooth 3.0)Voice recognition systemNFCLink to meter/MFDSteering switchesRear view cameraFunction Page28261201242219364623247CD:134 USB:136 iPod:139Bluetooth audio:141 AUX:145CD slot8-inch displaybuttonUSB:136 iPod:139Bluetooth audio:141 AUX:145- 6.5-inch display- buttonType C MAIN FUNCTIONSFeatures:AppsAM/FM radioMedia operationPhone (Bluetooth 2.1)Voice recognition systemSteering switchesRear view cameraFunction Page28262219332476.5-inch displaybuttonSYSTEM TYPES171Quick Guide
MAIN PRODUCT FEATURESDisplays search prediction P.22P.45P.170P.161P.107P.105Functions such as hands-free and applications can be used by connecting the system with Bluetooth devices wirelessly.Support for Apple Carplay and Android Auto allows access to functions such as maps, phone calls, and music.Commonly used functions and operations can be added to home screen.Customization to own specificationsSystem and Bluetooth device pairingApple Carplay / Android AutoRough destination search function*1Easy-to-view map screen display*1Search possible with variety of words such as addresses, facility names, intersection names・Search results are predicted and candidates displayed even if only partial words are known・Searches can even be performed with multiple keywords.Maps appear wider by minimizing constantly displayed buttons.Touch screen to display operation buttons (automatically hidden)Example: For calling specific phone numbers, listening to specific radio stations, etc.*1: Type A onlyButton positions can be changed freely.Operation buttons, etc.Mode switching buttons, etc.STANDARDIZED OPERATION SCREEN LAYOUT FOR ALL FUNCTIONSAdoption of intuitive and easy-to-use smartphone-like graphical user interfaceClose pop-up display to return to original screenPop-up displays are used instead of screen switching, making it difficult for users to lose the current screen.USE OF POP-UP DISPLAYSAllocating mode switching buttons on the left and operation buttons at the bottom prevents users becoming lost in operation no matter which functions are used. MAIN PRODUCT FEATURESMAIN PRODUCT FEATURES18
Displays search prediction P.22P.45P.170P.161P.107P.105Functions such as hands-free and applications can be used by connecting the system with Bluetooth devices wirelessly.Support for Apple Carplay and Android Auto allows access to functions such as maps, phone calls, and music.Commonly used functions and operations can be added to home screen.Customization to own specificationsSystem and Bluetooth device pairingApple Carplay / Android AutoRough destination search function*1Easy-to-view map screen display*1Search possible with variety of words such as addresses, facility names, intersection names・Search results are predicted and candidates displayed even if only partial words are known・Searches can even be performed with multiple keywords.Maps appear wider by minimizing constantly displayed buttons.Touch screen to display operation buttons (automatically hidden)Example: For calling specific phone numbers, listening to specific radio stations, etc.*1: Type A onlyButton positions can be changed freely.Operation buttons, etc.Mode switching buttons, etc.STANDARDIZED OPERATION SCREEN LAYOUT FOR ALL FUNCTIONSAdoption of intuitive and easy-to-use smartphone-like graphical user interfaceClose pop-up display to return to original screenPop-up displays are used instead of screen switching, making it difficult for users to lose the current screen.USE OF POP-UP DISPLAYSAllocating mode switching buttons on the left and operation buttons at the bottom prevents users becoming lost in operation no matter which functions are used. MAIN PRODUCT FEATURESMAIN PRODUCT FEATURES191Quick Guide
BASIC FUNCTIONRadio CD*1 USB iPod Bluetooth AUDIOOperations are performed by touching the touch screen directly with your finger.Displays the home screenShortcut to each screenTurn the knob to adjust the volume.Press the knob to turn the volume mute on/off.Press and hold to turn the audio system on/off.TOUCH SCREENBASIC FUNCTIONDrag PinchPress to eject a disc.*1P.134P.139P.40Press button to seek up or down for a radio station or to access a desired track/file.Press and hold button to continuously seek for a radio station, or to fast forward/rewind files or tracks.Audio operation screen:Turn the knob to select a radio station or skip to the next or previous track/file.Press and hold the knob to display the sound quality adjustment screen. List display screen:Turn the knob to move the cursor.Press the knob to select the item selected with the cursor.Insert a disc into this slot. The CD player turns on immediately.*1P.38 “Map” *2“Phone ” *3“Apps” “Media” “Radio ”P.27P.24 P.22P.28OVERVIEW BUTTONSP.116*1: Type A/B only *3: Type B/C only*2: Type A onlyP.39P.118, 124P.136P.141P.26Button positions can be changed freely.“Media (Media)”　SCREENP.27“Map (Map)” SCREEN(TYPE A ONLY)P.24“Phone (Phone)”　SCREENP.22“Radio (Radio)” SCREENP.26“Settings (Settings)” SCREENP.30“Apps (Apps)” SCREENP.28Commonly used functions and operations can be added to home screen.HOME SCREENP.46P.45BASIC FUNCTION20
Radio CD*1 USB iPod Bluetooth AUDIOOperations are performed by touching the touch screen directly with your finger.Displays the home screenShortcut to each screenTurn the knob to adjust the volume.Press the knob to turn the volume mute on/off.Press and hold to turn the audio system on/off.TOUCH SCREENBASIC FUNCTIONDrag PinchPress to eject a disc.*1P.134P.139P.40Press button to seek up or down for a radio station or to access a desired track/file.Press and hold button to continuously seek for a radio station, or to fast forward/rewind files or tracks.Audio operation screen:Turn the knob to select a radio station or skip to the next or previous track/file.Press and hold the knob to display the sound quality adjustment screen. List display screen:Turn the knob to move the cursor.Press the knob to select the item selected with the cursor.Insert a disc into this slot. The CD player turns on immediately.*1P.38 “Map” *2“Phone ” *3“Apps” “Media” “Radio ”P.27P.24 P.22P.28OVERVIEW BUTTONSP.116*1: Type A/B only *3: Type B/C only*2: Type A onlyP.39P.118, 124P.136P.141P.26Button positions can be changed freely.“Media (Media)”　SCREENP.27“Map (Map)” SCREEN(TYPE A ONLY)P.24“Phone (Phone)”　SCREENP.22“Radio (Radio)” SCREENP.26“Settings (Settings)” SCREENP.30“Apps (Apps)” SCREENP.28Commonly used functions and operations can be added to home screen.HOME SCREENP.46P.45BASIC FUNCTION211Quick Guide
“Phone (Phone)” SCREENOperate the Bluetooth phone. - Register the Bluetooth phone. -Display the "Phone (Phone)" screen. -Turn the Bluetooth phone Bluetooth function ON and select "Subaru BT".- Operation Flow: Pairing the System with a Bluetooth Phone - P.80, 89Place calls/send messages from list containing registered favoritesPlace calls/send messages from placed/received call history list Enter phone numbers to place callsPlace calls/send messages from Phonebook registered in cellular phoneCheck or reply to messages/place calls from received message listP.80, 89 P.81P.88, 89P.81, 89If unable to pair, check whether your Bluetooth phone is compatible with the system.Prepare the Bluetooth phone to be paired.Send message. - In-call screen is displayed.Select message. -P.59- Operation Flow: Placing Calls/Sending Messages from the Phonebook - Select number for making call/sending message. -Select call recipient from phonebook. -If unable to select the button, the setting for downloading the phonebook for the Bluetooth phone may be OFF.End callPlace callSend messageMute voice from this sideHold callTransfer call to Bluetooth phoneSwitch to call with other partyStart three-way callIn-call screen display and operation may differ, or may not be possible depending on the Bluetooth phone used.BASIC FUNCTION22
“Phone (Phone)” SCREENOperate the Bluetooth phone. - Register the Bluetooth phone. -Display the "Phone (Phone)" screen. -Turn the Bluetooth phone Bluetooth function ON and select "Subaru BT".- Operation Flow: Pairing the System with a Bluetooth Phone - P.80, 89Place calls/send messages from list containing registered favoritesPlace calls/send messages from placed/received call history list Enter phone numbers to place callsPlace calls/send messages from Phonebook registered in cellular phoneCheck or reply to messages/place calls from received message listP.80, 89 P.81P.88, 89P.81, 89If unable to pair, check whether your Bluetooth phone is compatible with the system.Prepare the Bluetooth phone to be paired.Send message. - In-call screen is displayed.Select message. -P.59- Operation Flow: Placing Calls/Sending Messages from the Phonebook - Select number for making call/sending message. -Select call recipient from phonebook. -If unable to select the button, the setting for downloading the phonebook for the Bluetooth phone may be OFF.End callPlace callSend messageMute voice from this sideHold callTransfer call to Bluetooth phoneSwitch to call with other partyStart three-way callIn-call screen display and operation may differ, or may not be possible depending on the Bluetooth phone used.BASIC FUNCTION231Quick Guide
“Map (Map)” SCREEN (TYPE A ONLY)P.160 P.161Touch screen to display operation buttons.(automatically hidden)(arrow direction is travel direction)Own vehicle mark Menu buttonCurrent streetDestination search P.169Route guidance P.177Next street nameDistance to the next turn and an arrow indicating the turning directionScale indicatorZoom inThe orientation of the map can be changed between 2D north-up, 2D heading-up and 3D.Touch the current street name to display details of the current location, allowing that location to be registered.P.1632D North-up screen 2D Heading-up screen 3D screenZoom outVoice guidance on/offTraffic information display on/offSearch for nearby gas stationsRemaining time/remaining distance/estimated arrival timeGuidance routeCurrent positionSpeed Limit indicatorCURRENT POSITION MAPROUTE GUIDANCE SCREENThe screen display automatically changes to display travel lanes at expressway junctions, etc.Search for your destination. - Select your destination.-Select the route. - Route guidance starts.Display the destination search menu. -Destinations can also be searched from POIs or previously set destinations.A search is performed and results displayed for the fastest, shortest, and most economic routes.By registering your home beforehand, it can easily be set as the destination.Destinations can also be set directly from the Map screen.P.177P.170P.174P.171, 172JUNCTION SCREENRETURNING HOMESearches are possible with a variety of words such as addresses, facility names, and intersection names.Destinations matching the search words are displayed in a list.The travel route is displayed, and voice guidance starts.Search candidates are displayed. (Search results are predicted and candidates displayed even if only partial search words are known)Setting up home P.31Setting home as the destination P.169- Operation Flow: Guiding the Route - BASIC FUNCTION24
“Map (Map)” SCREEN (TYPE A ONLY)P.160 P.161Touch screen to display operation buttons.(automatically hidden)(arrow direction is travel direction)Own vehicle mark Menu buttonCurrent streetDestination search P.169Route guidance P.177Next street nameDistance to the next turn and an arrow indicating the turning directionScale indicatorZoom inThe orientation of the map can be changed between 2D north-up, 2D heading-up and 3D.Touch the current street name to display details of the current location, allowing that location to be registered.P.1632D North-up screen 2D Heading-up screen 3D screenZoom outVoice guidance on/offTraffic information display on/offSearch for nearby gas stationsRemaining time/remaining distance/estimated arrival timeGuidance routeCurrent positionSpeed Limit indicatorCURRENT POSITION MAPROUTE GUIDANCE SCREENThe screen display automatically changes to display travel lanes at expressway junctions, etc.Search for your destination. - Select your destination.-Select the route. - Route guidance starts.Display the destination search menu. -Destinations can also be searched from POIs or previously set destinations.A search is performed and results displayed for the fastest, shortest, and most economic routes.By registering your home beforehand, it can easily be set as the destination.Destinations can also be set directly from the Map screen.P.177P.170P.174P.171, 172JUNCTION SCREENRETURNING HOMESearches are possible with a variety of words such as addresses, facility names, and intersection names.Destinations matching the search words are displayed in a list.The travel route is displayed, and voice guidance starts.Search candidates are displayed. (Search results are predicted and candidates displayed even if only partial search words are known)Setting up home P.31Setting home as the destination P.169- Operation Flow: Guiding the Route - BASIC FUNCTION251Quick Guide
Depending on the audio source, several items from Artists (Artists), Albums (Albums), Songs (Songs), Playlists (Playlists), Audiobooks (Audiobooks), Genres (Genres), Composers (Composers), Podcasts (Podcasts), and Folders (Folders) are displayed in a list.TO USE SUPPORTED MEDIA WITH SYSTEM“Media (Media)” SCREENSelect the playback mode. - Play a track. -　 /Display the playback mode list. -- Operation Flow: Using Playback Modes - Pause/playChange media sourceCD*: Select desired track from track listUSB/iPod/Bluetooth audio: Playback tracks and programs, etc. in a variety of playback modesChange to other Bluetooth audio device/register new deviceRandom playback on/offChange tracksSelect and hold to fast rewind Change tracksSelect and hold to fast forwardRepeat/do not repeat track currently playingUSB/iPod:Connect device to vehicle USB portUSB memory/iPods supported by systemBluetooth audio:Register device in systemBluetooth audio devices supported by systemPlay all tracks applicable to the selected playback mode.Example: If an artist is selected in Artists (Artists) playback mode, all albums by the selected artist are played.CD*:Insert a discDiscs supported by systemAUX:Connect portable device to vehicle AUX connection terminal P.39P.38P.151P.39P.154P.144P.55*: Type A/B onlyPlay the selected track.Radio mode has a mix preset function, which can store up to 18 stations from any of the AM, FM or SiriusXM® Satellite Radio* bands.To listen to a satellite radio broadcast* in the vehicle, a subscription to the SiriusXM® Satellite Radio service is necessary.“Radio (Radio)” SCREENRegister the radio station. -Select the radio band. -Select to seek for a station/channel.Select and hold one of the screen buttons.- Operation Flow: Presetting a Radio Station - Preset stationsScan ORChange radio modeSelect to turn HD Radio* mode on/off (AM/FM). Play/pauseRadio programs can be temporarily saved and played back at a later date.Current programNextPreviousSelect to scan for receivable stations/channels.TEMPORARY RADIO PROGRAM SAVE FUNCTION*: Type A/B onlySelect the radio station. - / P.119P.120P.122BASIC FUNCTION26
Depending on the audio source, several items from Artists (Artists), Albums (Albums), Songs (Songs), Playlists (Playlists), Audiobooks (Audiobooks), Genres (Genres), Composers (Composers), Podcasts (Podcasts), and Folders (Folders) are displayed in a list.TO USE SUPPORTED MEDIA WITH SYSTEM“Media (Media)” SCREENSelect the playback mode. - Play a track. -　 /Display the playback mode list. -- Operation Flow: Using Playback Modes - Pause/playChange media sourceCD*: Select desired track from track listUSB/iPod/Bluetooth audio: Playback tracks and programs, etc. in a variety of playback modesChange to other Bluetooth audio device/register new deviceRandom playback on/offChange tracksSelect and hold to fast rewind Change tracksSelect and hold to fast forwardRepeat/do not repeat track currently playingUSB/iPod:Connect device to vehicle USB portUSB memory/iPods supported by systemBluetooth audio:Register device in systemBluetooth audio devices supported by systemPlay all tracks applicable to the selected playback mode.Example: If an artist is selected in Artists (Artists) playback mode, all albums by the selected artist are played.CD*:Insert a discDiscs supported by systemAUX:Connect portable device to vehicle AUX connection terminal P.39P.38P.151P.39P.154P.144P.55*: Type A/B onlyPlay the selected track.Radio mode has a mix preset function, which can store up to 18 stations from any of the AM, FM or SiriusXM® Satellite Radio* bands.To listen to a satellite radio broadcast* in the vehicle, a subscription to the SiriusXM® Satellite Radio service is necessary.“Radio (Radio)” SCREENRegister the radio station. -Select the radio band. -Select to seek for a station/channel.Select and hold one of the screen buttons.- Operation Flow: Presetting a Radio Station - Preset stationsScan ORChange radio modeSelect to turn HD Radio* mode on/off (AM/FM). Play/pauseRadio programs can be temporarily saved and played back at a later date.Current programNextPreviousSelect to scan for receivable stations/channels.TEMPORARY RADIO PROGRAM SAVE FUNCTION*: Type A/B onlySelect the radio station. - / P.119P.120P.122BASIC FUNCTION271Quick Guide
The SUBARU STARLINK function allows the system to link with a smartphone using Bluetooth.SUBARU STARLINK*2List of usable applicationsPandora*1P.102The MirrorLinkTM function allows smartphone content to be operated via the system.Pandora is free personalized radio that offers effortless and endless music enjoyment and discovery.ahaTM is a cloud-based applica-tion that connects to the system and gives you access to your favorite web content safely and easily.P.96P.95ahaTMP.98In order to use the application on this system, the application must be installed on the smartphone.●Search and download the application from your smart-phone app. • iPhone: App Store via iTunes • Android device: Google Play 　Store●Create an account and login to the application on the smart-phone.SETTINGS REQUIRED TO USE THE APPLICATION“Apps (Apps)” SCREEN*1: Pandora is available in the United States, Australia, and New Zealand.*3: Type A/B only*2: Type A/B onlyP.92MirrorLink™*3*: Type A/B onlyCarPlay can be used to view iPhone maps, play music, and place calls by connecting your iPhone to the system. Supported applications can also be run.Android AutoP.105Android Auto can be used to view Android maps, play music, and place calls by connecting your Android terminal to the system. Supported applications can also be run. P.107Apple CarplayWeather information broadcast by weather stations on route from your current location to your destination can be viewed during route guidance.TravelLink*P.182P.109P.174On models with navigations systems, weather information can be viewed by linking with the navigation function.TravelLink is a service provided by SiriusXM® Satellite Radio, and can be used to view information on fuel information, sports, stocks, and weather.Fuel information Sports Stocks WeatherCurrent weather information for your destination can be viewed at the route calcula-tion screen.Weather informationTo use TravelLink with the system, a subscription to the SiriusXM TravelLink service is necessary.BASIC FUNCTION28
The SUBARU STARLINK function allows the system to link with a smartphone using Bluetooth.SUBARU STARLINK*2List of usable applicationsPandora*1P.102The MirrorLinkTM function allows smartphone content to be operated via the system.Pandora is free personalized radio that offers effortless and endless music enjoyment and discovery.ahaTM is a cloud-based applica-tion that connects to the system and gives you access to your favorite web content safely and easily.P.96P.95ahaTMP.98In order to use the application on this system, the application must be installed on the smartphone.●Search and download the application from your smart-phone app. • iPhone: App Store via iTunes • Android device: Google Play 　Store●Create an account and login to the application on the smart-phone.SETTINGS REQUIRED TO USE THE APPLICATION“Apps (Apps)” SCREEN*1:Pandora is available in the United States, Australia, and New Zealand.*3: Type A/B only*2: Type A/B onlyP.92MirrorLink™*3*: Type A/B onlyCarPlay can be used to view iPhone maps, play music, and place calls by connecting your iPhone to the system. Supported applications can also be run.Android AutoP.105Android Auto can be used to view Android maps, play music, and place calls by connecting your Android terminal to the system. Supported applications can also be run. P.107Apple CarplayWeather information broadcast by weather stations on route from your current location to your destination can be viewed during route guidance.TravelLink*P.182P.109P.174On models with navigations systems, weather information can be viewed by linking with the navigation function.TravelLink is a service provided by SiriusXM® Satellite Radio, and can be used to view information on fuel information, sports, stocks, and weather.Fuel information Sports Stocks WeatherCurrent weather information for your destination can be viewed at the route calcula-tion screen.Weather informationTo use TravelLink with the system, a subscription to the SiriusXM TravelLink service is necessary.BASIC FUNCTION291Quick Guide
PhoneSound P.68P.62Vehicle P.70Navigation* P.183P.56General“Settings (Settings)” SCREEN*: Type A onlySCROLLSCROLL SCROLLSCROLLAdd a new profile. -Registering a Bluetooth phone -Register your home/office. - Register wallpaper. -Enter an arbitrary name.Pair the system and Bluetooth phone.Search for and register your home/office address.Procedure complete.- Operation Flow: Create a driver profile - P.22By creating a driver profile and registering your mobile phone and address, etc., registered information can be called at any time.CREATE A DRIVER PROFILEBASIC FUNCTION30
PhoneSound P.68P.62Vehicle P.70Navigation* P.183P.56General“Settings (Settings)” SCREEN*: Type A onlySCROLLSCROLL SCROLLSCROLLAdd a new profile. -Registering a Bluetooth phone -Register your home/office. - Register wallpaper. -Enter an arbitrary name.Pair the system and Bluetooth phone.Search for and register your home/office address.Procedure complete.- Operation Flow: Create a driver profile - P.22By creating a driver profile and registering your mobile phone and address, etc., registered information can be called at any time.CREATE A DRIVER PROFILEBASIC FUNCTION311Quick Guide
STEERING SWITCHESP.147Press the switch to start the voice recognition system / SiriSome parts of the audio system can be adjusted using the switches on the steering wheel.P.76P.190P.193By pressing the phone switch, a call can be received or ended without taking your hands off the steering wheel.Operate the vehicle multi-information display.　See vehicle Owner’s Manual.Press: Volume up/downPress and hold: Volume up/down continuouslyChange audio sourcesRADIOPress: Seeks up/down to strong frequencyPress and hold: Quickly seek up/down until long release, then seek down to strong frequencyMEDIAPress: Select a track/filePress and hold: Fast forward/rewindSTEERING SWITCHESSTEERING SWITCHESSTEERING SWITCHES32
33BASIC FUNCTION22
BASIC INFORMATION BEFORE OPERATION34BASIC INFORMATION BEFORE OPERATIONINITIAL SCREENINITIAL SCREENWARNING lWhen the vehicle is stopped with the engine running, always apply the parking brake for safety.1. When the ignition switch is in the “ACC” or “ON” position, the initial screen will be displayed and the system will begin operating. ●After a few seconds, the “CAUTION (CAUTION)” screen will be displayed.2. Select I Agree (I Agree). ●After about 5 seconds, the “CAUTION (CAUTION)” screen automatically switches to the next screen. ●Type A only: Select (Language) to select a language. XType A only3. Conrm the end-user license agreement, and then select Accept (Accept).
BASIC INFORMATION BEFORE OPERATION35BASIC FUNCTION2When you use this system for the rst time, or after the battery disconnection, the following screen will be displayed. ● (Add New Prole): Select to add a new prole. (→P.35) ● (default): Select to set the preset default setting.ADDING A NEW PROFILE1. Select (Add New Prole).2. Select (Enter Name).3. Enter a name, and then select Next (Next).4. Select Next (Next).5. Select (Add Phone) to register a Bluetooth device. ●To skip registration, select Next (Next) before registration, and then select (Skip).
BASIC INFORMATION BEFORE OPERATION366. When this screen is displayed, search for the device name displayed on this screen on the screen of your Bluetooth device. ●Cancel (Cancel): Select to cancel the registration. ●For details about operating the Bluetooth device, see the manual that comes with it.7. Register the Bluetooth device using your Bluetooth device. ●A PIN-code is not required for SSP (Secure Simple Pairing) compatible Bluetooth devices. Depending on the type of Bluetooth device being connected, a message conrming registration may be displayed on the Bluetooth device’s screen. Respond and operate the Bluetooth device according to the conrmation message.8. Select (Conrm). ●Cancel (Cancel): Select to cancel the registration.9. Check that the following pop up message is displayed. ●Cancel (Cancel): Select to cancel the registration. ● If a conrmation message appears asking whether to transfer the phone’s contact data to the system, select the appropriate button.
BASIC INFORMATION BEFORE OPERATION37BASIC FUNCTION210. Check that the following pop up message is displayed when the connection is complete. ●If an error message appears, follow the guidance on the screen to try again.11. Select Next (Next).12. Select (Home Address). ●To skip registration, select Next (Next) before registration, and then select (Skip).13. Enter an address, and then select (Search).14. Select the desired item from the list.15. Select (Work Address) and register in the same way as a home address.16. Select Next (Next).
BASIC INFORMATION BEFORE OPERATION3817. Select the desired wallpaper, and then select Next (Next). ●To skip registration, select Next (Next) before registration, and then select (Skip).18. Select Finish (Finish).After setting up, you can change home or work address and phone settings, etc. ● Changing the home/work address: →P.167 ● Changing the Bluetooth device: →P.56 ● Setting the driver prole: →P.64LOADING AND UNLOADING A DISC (TYPE A/B ONLY)LOADING A DISCCAUTION lNever try to disassemble or oil any part of the CD player. Do not insert anything other than a disc into the slot.1. Insert a disc into the disc slot. ●After insertion, the disc is automatically loaded.NOTE lCompatible Disc: →P.151 lWhen inserting a disc, gently insert the disc with the label facing up.
BASIC INFORMATION BEFORE OPERATION39BASIC FUNCTION2UNLOADING A DISC1. Press and remove the disc.NOTE lDiscs can be unloaded even when the ignition switch is turned off.CONNECTING AND DISCONNECTING A USB MEMORY/PORTABLE DEVICECONNECTING A DEVICE1. Connect a device.Type C onlyType A/B only ●Turn on the power of the device if it is not turned on.NOTE lCompatible USB memory: →P.154 lCompatible iPod: →P.154 lThis unit does not support commercially available USB hubs. lBy connecting a device such as a cellular phone, charging starts depending on the device.
BASIC INFORMATION BEFORE OPERATION40TOUCH SCREEN GESTURESOperations are performed by touching the touch screen directly with your nger.Operation method Outline Main useTouchQuickly touch and release once.Changing and selecting various settingsDouble Touch with one nger*1Quickly touch and release twice with one nger.Enlarging the scale of the map screenDouble Touch with two ngers*1Quickly touch and release twice with two ngers.Reducing the scale of the map screenOperation method Outline Main useDrag*2Touch the screen with your nger, and move the screen to the desired position.• Scrolling the lists• Scrolling the map screen*1Swipe*2Quickly move the screen by swiping with your nger.• Scrolling the lists• Scrolling the map screen*1Pinch*1Move your two ngers further apart (pinch-out) to zoom in the map. Move your two ngers closer together (pinch-in) to zoom out the map.Changing the scale of the map screen*1: Type A only*2: The above operations may not be performed on all screens.NOTE lSwipe operations may not be performed smoothly in high altitudes.
BASIC INFORMATION BEFORE OPERATION41BASIC FUNCTION2TOUCH SCREEN OPERATIONThis system is operated mainly by the buttons on the screen. (Referred to as screen buttons in this manual.) ●When a screen button is touched, a beep sounds. The beep sound can be turned on/off. (→P.68)CAUTION lTo prevent damaging the screen, lightly touch the screen buttons with your nger. lDo not use objects other than your nger to touch the screen. lWipe off ngerprints using a glass cleaning cloth. Do not use chemical cleaners to clean the screen, as they may damage the touch screen.NOTE lIf the system does not respond to touching a screen button, move your nger away from the screen and then touch it again. lDimmed screen buttons cannot be operated. lThe displayed image may become darker and moving images may be slightly distorted when the screen is cold. lIn extremely cold conditions, the map may not be displayed and the data input by a user may be deleted. Also, the screen buttons may be harder than usual to depress. lWhen is displayed on the screen, select to close a pop up screen.ENTERING LETTERS AND NUMBERS/LIST SCREEN OPERATIONENTERING LETTERS AND NUMBERSWhen searching by an address, name, etc., or entering data, letters and numbers can be entered via the screen.No. Information/FunctionInput eld• The input eld contains text to assist the user in completing tasks.• The position of the cursor can be moved by selecting the desired location in the input eld.Select to clear the input eld.Displays candidate items based on the input letters.The desired item can be selected.
BASIC INFORMATION BEFORE OPERATION42No. Information/FunctionSelect to erase one character. Select and hold to continue erasing characters.Select to enter the item.Select to change the character type.Select to enter characters in lower case or in upper case.NOTE lThe appearance of the keyboard may change or the input method may be limited depending on the circumstances where the software keyboard is displayed.LIST SCREEN OPERATIONThe list screen can be scrolled by a swipe gesture.Faster scrolling is possible by dragging on or near the scroll position indicator.For details about the operation: →P. 40The list screen can also be scrolled by the “TUNE/SCROLL” knob and pressing the knob will enter it.No. Information/FunctionSelect to skip to the next or previous page.Select and hold to scroll through the displayed list.This indicates the displayed screen’s position.
BASIC INFORMATION BEFORE OPERATION43BASIC FUNCTION2No. Information/FunctionSome lists contain character screen buttons, ABC (ABC), DEF (DEF) etc., which allow a direct jump to list entries that begin with the same letter as the character screen button.Every time the same character screen button is selected, the list starting with the subsequent character is displayed.SCREEN ADJUSTMENTADJUSTING BRIGHTNESSThe brightness of the screen can be adjusted. (→P.62)CHANGING BETWEEN DAY AND NIGHT MODEDepending on the position of the headlight switch, the screen changes to day or night mode.NOTE lType A only: Regardless of the position of the headlight switch, the screen mode can be changed. (→P.176, 183)
BASIC INFORMATION BEFORE OPERATION44STATUS DISPLAYThe status of the Bluetooth connection and so on is displayed on the screen.No. Name ConditionsScreen hierarchy Displays the screen context.*The level of Wi-Fi® reception When Wi-Fi® function is off, no item is displayed.The Bluetooth connection indicatorThis icon is displayed when the Bluetooth connection is established.No. Name ConditionsThe amount of battery charge leftLow FullThe amount displayed does not always correspond with the amount displayed on the Bluetooth device.The level of receptionPoor ExcellentThe level of reception does not always correspond with the level displayed on the cellular phone. The level of reception may not be displayed depending on the phone you have. Active audio source Select to display contextual metadata information.*: Type A/B only
BASIC INFORMATION BEFORE OPERATION45BASIC FUNCTION2HOME SCREEN OPERATIONADDING SHORTCUT BUTTONS TO THE HOME SCREENShortcut buttons for various functions can be added to the home screen when the home screen shortcut function is turned on. (→P.62)1. Press .2. Select (Add Shortcut).3. Select the desired function.4. Select the desired shortcut button. ●Depending on the function, select other items and enter necessary information.5. Ensure that the shortcut button is displayed on the home screen.NOTE lUp to 24 shortcut buttons including the default shortcut buttons can be added to the home screen.
BASIC INFORMATION BEFORE OPERATION46DELETING AND MOVING SHORTCUT BUTTONSUsers can rearrange the home screen buttons when the home screen shortcut function is turned on. (→P.62)1. Select and hold the shortcut button. XWhen moving shortcut buttons2. Drag the button to the desired position. ●User can move buttons to another page by dragging them to the corresponding end of the screen if the number of buttons allows for multiple pages. XWhen deleting shortcut buttons2. Drag the button to the bottom of the screen.
REAR VIEW CAMERA47BASIC FUNCTION2REAR VIEW CAMERAREAR VIEW CAMERAA rear view camera is attached to the trunk lid or rear gate. When the ignition switch is “ON” and the shift lever (MT models) or select lever (CVT models) is set to “R”, the rear view camera automatically displays the rear view image behind the vehicle on one of the following displays.WARNING lSince the rear view camera uses a wide-angle lens, the image on the monitor is different from the actual view in terms of distance. lSince the range of the image on the monitor is limited, you should always check the rear view and the surrounding area with your eyes and mirrors, and move backward at a slow speed. Moving backward only by checking the rear view image from the camera could cause an accident. lDo not disassemble or modify the camera, switch or wiring. If smoke comes out or you smell a strange odor, stop using the rear view camera immediately. Contact your SUBARU dealer for an inspection. Continued use may result in accident, re or electric shock.CAUTION lIf your vehicle is washed with a high-pressure washer, do not allow water to contact the camera directly. Entry of water in the camera lens may result in condensation, malfunction, re or electric shock. lSince the camera is a precision device, do not subject it to strong impacts. Otherwise, malfunction, re or electric shock may occur. lIf mud or snow sticks to or is frozen on the camera, you must be very careful when removing it. Otherwise, damage to the camera may cause a re or electric shock. Pour water or lukewarm water over the camera to remove mud and ice, and wipe it with a soft, dry cloth. lDo not put a ame close to the camera or wiring. Otherwise, damage or re may occur. lWhen replacing the fuse, be sure to use a fuse with the specied rating. Use of a fuse with a different rating may result in a malfunction. lIf the rear view camera is used for a long time while the engine is not operated, the battery may become completely discharged.
REAR VIEW CAMERA48NOTE lDo not wipe the camera with alcohol, benzine or paint thinner. Otherwise, discoloration may occur. To remove contamination, wipe the camera with a cloth moistened with a diluted neutral detergent and then wipe it with a soft, dry cloth. lWhen waxing the vehicle, be careful not to apply the wax to the camera. If it comes in contact with the camera, moisten a clean cloth with a diluted neutral detergent to remove the wax. lThe camera lens has a hard coating to help prevent scratches. However, when washing the vehicle or cleaning the camera lens, be careful not to scratch the camera lens. Do not use a washing brush directly on the camera lens. The image quality of the rear view camera may deteriorate. lStrong light shined on the camera lens may develop vertical lines around the light source. This is not a malfunction. lUnder uorescent light, the display may icker. However, this is not a malfunction. lThe image of the rear view camera may be slightly different from the actual color of the objects.HOW TO USE THE REAR VIEW CAMERAWhen the shift lever/select lever is set to “R”, the rear view camera automatically displays the rear view image from the vehicle. When the lever is set to other positions, the image before setting to “R” is displayed.1. Set the ignition switch to “ON”.2. Set the shift lever/select lever to “R”.NOTE lType A only: While the navigation system is activated, the image of the rear view camera will not be displayed. However, the image of the rear view camera has priority over other screen displays. lThe image of the rear view camera is horizontally reversed as is the case with the vehicle rearview mirror or the side view mirror. lIt may be difcult to see the image of the rear view camera in the following cases. This is not a malfunction of the camera.• The vehicle is in a dark place (at night, in a tunnel, etc.).• The vehicle is in an extremely hot or cold place.• An object (such as raindrops, snow, dirt, etc.) that disturbs the view of the rear view camera sticks to the lens of the camera.• Strong light shined directly on the camera lens (occasionally, there are vertical lines on the screen).
REAR VIEW CAMERA49BASIC FUNCTION2VIEWING RANGE ON THE SCREENCAUTION lThe range that can be viewed with the rear view camera is limited. Always be sure to check with your eyes when moving backward and proceed slowly.The area from the rear end of the bumper can be viewed. Areas at both ends of the bumper and areas just under the bumper cannot be viewed. Also, the image from the rear view camera looks shorter than the actual distance. XRange of view XImage from camera
REAR VIEW CAMERA50The area above the camera cannot be viewed. If there is an object that has a wide projection on its upper part such as a sign pole behind the vehicle, the projection cannot be seen on the screen. XRange of view XImage from cameraHELP LINEThe help line (distance marker and vehicle width line) is a guide to help you realize the actual distance from the screen image.Check Surroundings Before Backing UpNo. InformationVehicle width line (oblique vertical line)Approx. 10 feet (3 m) from the bumper (green horizontal line)Approx. 3 feet (1 m) from the bumper (yellow horizontal line)Approx. 1.5 feet (0.5 m) from the bumper (red horizontal line)Vehicle centerline
REAR VIEW CAMERA51BASIC FUNCTION2 ●When the shift lever/select lever is set to position “R”, the monitor screen displays the help lines together with the rear view image.CAUTION lWhen moving backward, always check the back with your eyes without relying on the help lines. lThe actual position may be different from the indication of the help lines. lDifferences may occur due to number of passengers or loaded cargo. lWhen the vehicle is on a slope or when the vehicle is inclined against the road, the indication is different from the actual position. lBe sure to observe the displayed warning message “Check Surroundings Before Backing Up”.NOTE lIf you shift to the “R” range shortly after turning on the ignition switch, the warning message “Check Surroundings Before Backing Up” may not be displayed. Wait for several seconds or more after turning on the ignition switch before shifting to the “R” range. Then the warning message will be displayed.DIFFERENCE BETWEEN SCREEN IMAGE AND ACTUAL ROADThe distance markers show the distance for a level road when the vehicle is not loaded. It may be different from the actual distance depending on the loading conditions or road conditions. XWhen there is an upward slope at the back3 feet (1 m) ●The distance on the screen looks farther than the actual distance.
REAR VIEW CAMERA52 XWhen there is a downward slope at the back3 feet (1 m) ●The distance on the screen looks nearer than the actual distance.NOTE lWhen cargo is loaded, the rear view distance on the screen looks farther than the actual distance as in an upward slope.FEATURE OF DISTANCE MARKERNo. Information3 feet (1 m) line10 feet (3 m) line ●The distance marker shows the distance on the road. If there is a car or other object close behind, distance cannot be correctly displayed.
53SETTINGS33
Bluetooth® SETTINGS54Bluetooth® SETTINGSREGISTERING A Bluetooth DEVICE FOR THE FIRST TIMEThe Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc.To use the hands-free system or the Bluetooth audio system, it is necessary to register a Bluetooth phone or an audio device with the system.Once the Bluetooth device has been registered, it is possible to use the hands-free system and the Bluetooth audio system.This operation cannot be performed while driving.For details about registering a Bluetooth device: →P.571. Turn the Bluetooth connection setting of your Bluetooth device on. ●This function is not available when Bluetooth connection setting of your Bluetooth device is set to off.2. Display the phone screen (→P.74) or the Bluetooth audio operation screen. (→P.141)3. Select Yes (Yes) to register a Bluetooth device.4. Follow the steps in “ADDING A NEW PROFILE” from “STEP 6” to “STEP 10” . (→P.35)
Bluetooth® SETTINGS55SETTINGS3PROFILESThis system supports the following services.Bluetooth Device Spec. Function Requirements RecommendationsBluetooth Phone/ Bluetooth Audio Device Bluetooth Specication Registering a Bluetooth device Ver. 1.1 Type A/B only: Ver. 3.0 +EDRType C only: Ver. 2.1 +EDRBluetooth Device Prole Function Requirements RecommendationsBluetooth PhoneHFP (Hands-Free Prole) Hands-free system Ver. 1.0 Ver. 1.6OPP (Object Push Prole)Transferring the contactsVer. 1.1 Ver. 1.2PBAP (Phone Book Access Prole) Ver. 1.0 Ver. 1.1MAP (Message Access Prole) Bluetooth phone message - Ver. 1.0SPP (Serial Port Prole) APPS function - Ver. 1.1Bluetooth Audio DeviceA2DP (Advanced Audio Distribution Prole) Bluetooth audio systemVer. 1.0 Ver. 1.2AVRCP (Audio/Video Remote Control Prole) Ver. 1.0 Ver. 1.4NOTE lIf your cellular phone does not support HFP, registering the Bluetooth phone or using OPP, PBAP, MAP or SPP proles individually will not be possible. lIf the connected Bluetooth device version is older than recommended or incompatible, the Bluetooth device function may not work properly.
Bluetooth® SETTINGS56Bluetooth SETTINGS1. Press .2. Select Settings (Settings).3. Select Phone (Phone). XWhen registering a Bluetooth device4. Select (Add Device). ●For details about registering a Bluetooth device: →P.57 XWhen setting the Bluetooth device4. Select the desired device.5. Select the item to be set.No. Function PageConnecting or disconnecting Bluetooth devices 57Deleting Bluetooth devices 59Setting phonebook download 59Setting the automatic connection priority 60NOTE lThe phone settings screen can also be displayed by selecting (Change Device) on the phone overview screen (→P.79) or Bluetooth audio operation screen. (→P.141)
Bluetooth® SETTINGS57SETTINGS3REGISTERING A Bluetooth DEVICEUp to 5 Bluetooth devices can be registered.Bluetooth compatible phones (HFP) and audio devices (AVP) can be registered simultaneously.This operation cannot be performed while driving.1. Display the phone settings screen. (→P.56)2. Select (Add Device). XWhen another Bluetooth device is connected ●To disconnect the Bluetooth device, select Yes (Yes). XWhen 5 Bluetooth devices have already been registered ●A registered device needs to be deleted. Select Delete (Delete) to delete the least prioritized phone.3. Follow the steps in “ADDING A NEW PROFILE” from “STEP 6” to “STEP 10” . (→P.35)CONNECTING OR DISCONNECTING Bluetooth DEVICESUp to 5 Bluetooth devices (Phones (HFP) and audio devices (AVP)) can be registered.If more than 1 Bluetooth device has been registered, select which device to connect to. 1. Display the phone settings screen. (→P.56)2. Select the device to be connected or disconnected. ●“Connected (Connected)” is displayed next to the currently connected device. ●If the desired Bluetooth device is not on the list, select (Add Device) to register the device. (→P.57)
Bluetooth® SETTINGS583. Select (Connect) or (Disconnect). XWhen another Bluetooth device is connected ●To disconnect the Bluetooth device, select Yes (Yes).4. Check that a conrmation message is displayed when the connection is complete. ●If an error message appears, follow the guidance on the screen to try again.NOTE lIt may take time if the device connection is carried out during Bluetooth audio playback. lDepending on the type of Bluetooth device being connected, it may be necessary to perform additional steps on the device.AUTO CONNECTION MODELeave the Bluetooth device in a location where the connection can be established. ●When the ignition switch is in the “ACC” or “ON” position, the system searches for a nearby registered device. ●The system will connect with the registered device that was last connected, if it is nearby. ●There is more than one registered Bluetooth device available, the system will automatically connect to the Bluetooth device with the highest priority.(→P.60)CONNECTING MANUALLY When the auto connection has failed, it is necessary to connect Bluetooth manually.1. Press , and then select Settings (Settings).2. Select Phone (Phone).3. Follow the steps in “CONNECTING OR DISCONNECTING Bluetooth DEVICES” from “STEP 2”. (→P.57)
Bluetooth® SETTINGS59SETTINGS3RECONNECTING THE Bluetooth DEVICEIf a Bluetooth device is disconnected due to poor reception from the Bluetooth network when the ignition switch is turned to the “ACC” or “ON” position, the system automatically reconnect the Bluetooth device. ●If a Bluetooth phone is disconnected on purpose, such as turning it off, this does not happen. Reconnect the Bluetooth phone manually.DELETING Bluetooth DEVICES1. Display the phone settings screen. (→P.56)2. Select the desired device.3. Select Delete (Delete).4. Select Delete (Delete) when the conrmation message appears.NOTE lWhen deleting a Bluetooth phone, the contact data will be deleted at the same time.SETTING PHONEBOOK DOWNLOADWhen this function is activated, the phonebook data of the connected phone will be downloaded automatically.1. Display the phone settings screen. (→P.56)
Bluetooth® SETTINGS602. Select the device to be set.3. Select to turn “Phonebook Download (Phonebook Download)” on/off.NOTE lThis function is available for PBAP compatible Bluetooth phones only.SETTING THE AUTOMATIC CONNECTION PRIORITYThe automatic connection priority of the registered Bluetooth devices can be changed.1. Display the phone settings screen. (→P.56)2. Select the device to be set.3. Select (Reorder).
Bluetooth® SETTINGS61SETTINGS34. Select next to the desired device, and then drag it to the desired position.
OTHER SETTINGS62OTHER SETTINGSGENERAL SETTINGS1. Press .2. Select Settings (Settings).3. Select General (General).4. Select the items to be set.GENERAL SETTINGS SCREEN
OTHER SETTINGS63SETTINGS3No. Function PageSelect to set the driver prole. 64Select to set the screen brightness adjustment. -Select to adjust the screen brightness manually.This function is available when “Brightness Adjustment (Brightness Adjustment)” is set to “Manual (Manual)”.-Select to turn the screen on/off. -Select to turn the voice recognition prompts on/off. -No. Function PageSelect to turn the home screen shortcuts function on/off. 45*Select to turn the Wi-Fi® function on/off. -*Select to set Wi-Fi® connection settings. 65Auto Show Connected Device -*Select to set Sirius XM settings. 66Select to change the language.When (LINKD(with meter cluster)) is selected, the language setting in the system is synced to the language setting in the meter cluster.-Select to change the unit of measure for distance.When (LINKD(with meter cluster)) is selected, the unit of measure setting in the system is synced to the unit of measure setting in the meter cluster.-Select to update system software versions. 67Select to turn the available new system software version check on/off. 67Select to turn the automatic downloading of updates on/off. 67
OTHER SETTINGS64No. Function PageSelect to display the system information. -Select to change the Bluetooth system name. -Select to reset all setup items. -*: Type A/B onlySETTING THE DRIVER PROFILE1. Display the general settings screen. (→P.62)2. Select (Driver Prole). XWhen adding a new prole3. Select (Add New Prole).4. Follow the steps in “ADDING A NEW PROFILE” from “STEP 2”. (→P.35) XWhen changing the driver prole3. Select the desired prole. ● (default): Select to set the preset default setting. ●Edit (Edit): Select to edit the prole. (→P.64)NOTE lUp to 5 driver proles can be registered.EDITING THE DRIVER PROFILE1. Select Edit (Edit) on the “Select Driver Prole (Select Driver Prole)” screen. (→P.64)2. Select the desired prole. ● : Select to delete the prole. Select OK (OK) when the conrmation message appears.3. Follow the steps in “ADDING A NEW PROFILE” from “STEP 2”. (→P.35)
OTHER SETTINGS65SETTINGS3SETTING Wi-Fi® CONNECTION (TYPE A/B ONLY)1. Display the general settings screen. (→P.62)2. Select (Wi-Fi Settings).3. Select the desired network. ● (Add Network): Select to add a Wi-Fi® network (→P.65) ●Edit (Edit): Select to edit the Wi-Fi® network. (→P.65) ●The network connected to in the past is marked with . ●When a network with is selected and the password enter screen is displayed, enter the password, and then select (Join).4. Check that a conrmation message appears when the connection is complete. ●If an error message appears, follow the guidance on the screen to try again.ADDING A Wi-Fi® NETWORKAvailable networks which are not displayed by searching can be added.1. Select (Add Network) on the “WiFi Settings (WiFi Settings)” screen. (→P.65)2. Enter the network name, and then select Next (Next).3. Select the security type.4. Enter the password, and then select (Join).5. Check that a conrmation message appears when the connection is complete.EDITING THE NETWORKThe priority of the networks to connect to can be changed.1. Select Edit (Edit) on the “WiFi Settings (WiFi Settings)” screen. (→P.65)
OTHER SETTINGS662. Select the items to be set. ●: Select to delete the item. ●: Drag an item to the desired position.WARNING lUse Wi-Fi® devices only when safe and legal to do so. lYour audio unit is tted with Wi-Fi® antennas. People with implantable cardiac pacemakers, cardiac resynchronization therapy-pacemakers or implantable cardioverter debrillators should maintain a reasonable distance between themselves and the Wi-Fi® antennas. The radio waves may affect the operation of such devices. lBefore using Wi-Fi® devices, users of any electrical medical device other than implantable cardiac pacemakers, cardiac resynchronization therapy-pacemakers or implantable cardioverter debrillators should consult the manufacturer of the device for information about its operation under the inuence of radio waves.Radio waves could have unexpected effects on the operation of such medical devices.NOTE lCommunication standards:• 802.11b• 802.11g• 802.11n (2.4GHz) lSecurity:• WEP• WPATM• WPA2TM• Wi-Fi Protected SetupTM lWPA, WPA2 and Wi-Fi Protected Setup are registered mark of the Wi-Fi Alliance®.SETTING Sirius XM (TYPE A/B ONLY)1. Display the general settings screen. (→P.62)2. Select (Sirius XM Settings).No. FunctionSelect to display Sirius XM subscription.Select to turn TuneStart function on/off.
OTHER SETTINGS67SETTINGS3No. FunctionSelect to turn Featured Favorites function on/off.UPDATING THE SYSTEMThe system version can be updated via data communication through the aha application, a Wi-Fi® device, or a USB memory.UPDATING THE SYSTEM VIA DATA COMMUNICATION (TYPE A/B ONLY)1. Connect Wi-Fi® network (→P.65) or activate the aha application. (→P.98)2. Display the general settings screen. (→P.62)3. Select (Check for Updates).4. Select (Install Now) to download. ● (Later): Select to restart operation when the next time the ignition switch is turned to “ACC” or “ON” position. ●Cancel (Cancel): Select to cancel downloading. ●When “Automatically Download Updates (Automatically Download Updates)” is turned on, the update software is automatically downloaded. The following message appears when the ignition switch is set to “ACC” or “ON” position once the download is complete.5. Select (Install Now) to update. ● (Later): Select to restart operation when the next time the ignition switch is set to the “ACC” or “ON” position. ●Cancel (Cancel): Select to cancel updating.
OTHER SETTINGS686. Check that a conrmation message appears when the operation is complete, select OK (OK). ●If an error message appears, follow the guidance on the screen to try again.NOTE lWhen “Automatically Check for Updates (Automatically Check for Updates)” is turned on, update information appears when the ignition switch is set to “ACC” or “ON” position.UPDATING THE SYSTEM VIA USB MEMORYFor details, contact your SUBARU dealer or visit www.subaru.com.1. Connect a USB memory containing the new system version les.2. Select (Install Now) to update.3. Select OK (OK). ●If an error message appears, follow the guidance on the screen to try again.SOUND SETTINGS1. Press .2. Select Settings (Settings).3. Select Sound (Sound).4. Select the items to be set.
OTHER SETTINGS69SETTINGS3SOUND SETTINGS SCREEN No. FunctionSelect to set sound settings (→P.116)Select to set audio volume.Select to set AUX volume gain.Select to set the navigation prompt volume.Select to set to adjust the default volume of the other party’s voice.Select to adjust the ringtone volume.Select to set the voice recognition prompts volume.*Select to turn the alert sound when trafc, weather, or SXM game information is updated on/off.Select to turn the sound beeps on/off.Speed Volume*: Type A/B only
OTHER SETTINGS70VEHICLE CUSTOMIZATION1. Press .2. Select Settings (Settings).3. Select Vehicle (Vehicle).4. Select the desired item to be set.VEHICLE SETTINGS SCREEN
OTHER SETTINGS71SETTINGS3No. FunctionSelect to change the unit of measure for distance.Select to change the clock setting.Select to change the interior light off timer.Select to set the auto door lock on/off.Select to change the auto door lock time setting.Select to change the auto light sensor setting.Select to set the defogger on/off.Select to set the buzzer sound on/off.Select to set the hazard warning ashers on/off.No. FunctionSelect to set the driver’s door unlock on/off.Select to set the rear gate unlock on/off.Select to set the one touch turn signal on/off.Select to set the approaching time for the welcome lighting.Select to set the leaving time for the welcome lighting.
MEMO72
73PHONE44
PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES)74PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES)PHONE SCREENThe phone screen can be reached by the following methods: ●Press , and then select Phone (Phone). ●Type B/C only: Press . ●Press the switch on the steering wheel.Function PagePhone operationRegistering Bluetooth device 54Calling on the Bluetooth phone 78Receiving on the Bluetooth phone 82Talking on the Bluetooth phone 83Message function Using the Bluetooth phone message function 86Setting up a phone Setting the Bluetooth device 56
PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES)75PHONE4SOME BASICSThe hands-free system enables calls to be made and received without having to take your hands off the steering wheel.This system supports Bluetooth. Bluetooth is a wireless data system that enables cellular phones to be used without being connected by a cable or placed in a cradle.The operating procedure of the phone is explained here.WARNING lWhile driving, do not use a cellular phone or connect the Bluetooth phone. lYour audio unit is tted with Bluetooth antennas. People with implantable cardiac pacemakers, cardiac resynchronization therapy-pacemakers or implantable cardioverter debrillators should maintain a reasonable distance between themselves and the Bluetooth antennas. The radio waves may affect the operation of such devices. lBefore using Bluetooth devices, users of any electrical medical device other than implantable cardiac pacemakers, cardiac resynchronization therapy-pacemakers or implantable cardioverter debrillators should consult the manufacturer of the device for information about its operation under the inuence of radio waves. Radio waves could have unexpected effects on the operation of such medical devices.CAUTION lDo not leave your cellular phone in the vehicle. The temperature inside may rise to a level that could damage the phone.NOTE lIf your cellular phone does not support Bluetooth, this system cannot function. Certain functions may not be available depending on the type of cellular phone. lIn the following conditions, the system may not function:• The cellular phone is turned off.• The current position is outside the communication area.• The cellular phone is not connected.• The cellular phone has a low battery. lWhen using the hands-free function and other Bluetooth functions at the same time, the following problems may occur:• The Bluetooth connection may be cut.• Noise may be heard when playing back voice with the Bluetooth function. lThe other party’s voice will be heard from the front speakers. The audio system will be muted during phone calls or when hands-free voice commands are used. lTalk alternately with the other party on the phone. If both parties speak at the same time, the other party may not hear what has been said. (This is not a malfunction.) lKeep call volume down. Otherwise, the other party’s voice may be audible outside the vehicle and voice echo may increase. When talking on the phone, speak clearly towards the microphone.
PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES)76NOTE lThe other party may not hear you clearly when:• Driving on an unpaved road. (Making excessive trafc noise.)• Driving at high speeds.• Driving with a window open.• When air from the ventilator blows directly toward the microphone.• The sound of the air conditioning fan is loud.• There is a negative effect on sound quality due to the phone and/or network being used.REGISTERING/CONNECTING A Bluetooth PHONETo use the hands-free system for cellular phones, it is necessary to register a cellular phone with the system. (→P.54)Bluetooth PHONE CONDITION DISPLAYThe condition of the Bluetooth phone appears on the upper right side of the screen. (→P.44)USING THE PHONE SWITCH/MICROPHONE XSteering switchBy pressing the phone switch, a call can be received or ended without taking your hands off the steering wheel. Volume control switch ●Press the switch upwards to increase the volume. ●Press the switch downwards to decrease the volume. Off hook switch On hook switch
PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES)77PHONE4 XMicrophoneThe microphone is used when talking on the phone.VOICE RECOGNITION SYSTEMPress this switch to operate the voice recognition system. ●The voice recognition system and its list of commands can be operated. (→P.193)ABOUT THE CONTACTS IN THE CONTACT LIST ●The following data is stored for every registered phone. When another phone is connected, the following registered data cannot be read:• Contact data• Call history data• Favorites data• All phone settingsNOTE lWhen a phone’s registration is deleted, the above-mentioned data is also deleted.
PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES)78WHEN SELLING OR DISPOSING OF THE VEHICLEA lot of personal data is registered when the hands-free system is used. When selling or disposing of the vehicle, initialize the data. (→P.62) ●The following data in the system can be initialized:• Contact data• Call history data• Favorites data• All phone settingsNOTE lOnce initialized, the data and settings will be erased. Pay close attention when initializing the data.CALLING ON THE Bluetooth PHONEAfter a Bluetooth phone has been registered, a call can be made using the hands-free system. There are several methods by which a call can be made, as described below.1. Press .2. Select Phone (Phone).3. Select the desired button to call from.
PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES)79PHONE4 ●The phone screen can be displayed by pressing the switch on the steering wheel. ●Type B/C only: The phone screen can be displayed by pressing .How to make a call list PageBy the last number 79By favorites list 80By recent calls list 80By keypad*181By contacts list 81By SMS/MMS 89By POI call*2170, 171, 173By voice recognition system 195*1: The operation cannot be performed while driving.*2: Type A onlyBY THE LAST NUMBERCalls can be made using the latest call history item.1. Display the phone screen. (→P.78)2. Select (Overview).3. Select (Redial).4. Check that the “Calling (Calling)” screen is displayed.BY OFF HOOK SWITCHCalls can be made using the latest call history item.1. Press the switch on the steering wheel to display the phone screen.2. Press the switch on the steering wheel to display the recent calls list screen.3. Press the switch on the steering wheel to call the latest history item.4. Check that the “Calling (Calling)” screen is displayed.
PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES)80BY FAVORITES LISTCalls can be made using registered contacts which can be selected from a contact list.1. Display the phone screen. (→P.78)2. Select Favorites (Favorites), and then select the desired contact.3. Check that the “Calling (Calling)” screen is displayed.NOTE lTo use this function, it is necessary to register the contacts in the favorites list. (→P.81)BY RECENT CALLS LISTUp to 30 of the latest call history items (missed, incoming and outgoing) can be selected from the call list.1. Display the phone screen. (→P.78)2. Select (Recent), and then select the desired contact.No. Information/FunctionSelect to display all latest call history items.Select to display missed calls.Displays the call type icons.: Missed call: Incoming call: Outgoing call3. Check that the “Calling (Calling)” screen is displayed.
PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES)81PHONE4NOTE lWhen making a call to the same number continuously, only the most recent call is listed in call history. lWhen a phone number registered in the contact list is received, the name is displayed. lInternational phone calls may not be made depending on the type of cellular phone you have. lThe list should group together consecutive entries with the same phone number and same call type. For example, two calls from Kay Rowles’s mobile would be displayed as follows: Kay Rowles (2)BY KEYPAD1. Display the phone screen. (→P.78)2. Select (Keypad), and then enter the phone number.3. Select (Call).4. Check that the “Calling (Calling)” screen is displayed.NOTE lDepending on the type of Bluetooth phone being connected, it may be necessary to perform additional steps on the phone.BY CONTACTS LISTCalls can be made by using contact data which is transferred from a registered cellular phone.Up to 2500 contacts (maximum of 4 phone numbers and addresses per contact) can be registered in the contact list.1. Display the phone screen. (→P.78)2. Select (Phonebook), and then select the desired contact. ●A contact can be searched by entering the contact’s name.
PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES)823. Select the desired number. ●Type A only: When the address is selected, the route calculation screen is displayed. (→P.174) ●Numbers may include home, work, and mobile as categories depending on the phonebook data of the connected cellular phone. ●When is selected, is changed to (yellow).• The number is registered in the favorites list. (→P.80)• Type A only: The address is registered in the favorite places list. (→P.173) ●Each time the symbol is selected, the symbol changes between and (yellow).4. Check that the “Calling (Calling)” screen is displayed.NOTE lWhen “Phonebook Download (Phonebook Download)” is set to on, contacts is transferred automatically. (→P.59)RECEIVING ON THE Bluetooth PHONEINCOMING CALLSWhen a call is received, the incoming call message pops up with sound.1. Select or press the switch on the steering wheel to talk on the phone.To refuse to receive the call: Select or press the switch on the steering wheel.To put on hold: Select and hold , or press and hold the switch on the steering wheel. To adjust the volume of a received call: Turn the “” knob, or use the volume control switch on the steering wheel.
PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES)83PHONE4NOTE lDuring international phone calls, the other party’s name or number may not be displayed correctly depending on the type of cellular phone you have. lThe ringtone volume can also be set from the sound settings screen.(→P.68)TALKING ON THE Bluetooth PHONEWhile talking on the phone, this screen is displayed. The operations outlined below can be performed on this screen.No. FunctionSelect to transfer the call. Select Transfer (Transfer) to change from a hands-free call to a cellular phone call. Select (Transfer Back) to change from cellular phone call to hands-free call.Select to put a call on hold.Select to mute your voice to the other party.Select to hang up the phone.NOTE lWhen cellular phone call is changed to hands-free call, the hands-free screen will be displayed and its functions can be operated on the screen.
PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES)84NOTE lChanging between cellular phone call and hands-free call can be performed by operating the cellular phone directly. lTransferring methods and operations will be different depending on the type of cellular phone you have. lFor the operation of the cellular phone, see the manual that comes with it. lTurn the “” knob, or use the volume control switch on the steering wheel to adjust the volume of the other party’s voice.SENDING TONESBY DIAL PADThis operation cannot be performed while driving.1. Select Dial Pad (Dial Pad).2. Enter the desired number.BY SELECTING Release Tones (Release Tones)Release Tones (Release Tones) appears when a continuous tone signal(s) containing a (w) is registered in the contact list.This operation can be performed while driving.1. Select Release Tones (Release Tones).NOTE lA continuous tone signal is a character string that consists of numbers and the characters “p” or “w”. (e.g. 056133w0123p#1Û) lWhen the “p” pause tone is used, the tone data up until the next pause tone will be automatically sent after 2 seconds have elapsed. When the “w” pause tone is used, the tone data up until the next pause tone will be automatically sent after a user operation is performed. lRelease tones can be used when automated operation of a phone based service such as an answering machine or bank phone service is desired. A phone number with continuous tone signals can be registered in the contact list. lTone data after a “w” pause tone can be operated on voice command during a call.
PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES)85PHONE4CALL WAITINGWhen a call is interrupted by a third party while talking, the incoming call message pops up with sound.1. Select or press the switch on the steering wheel to start talking with the other party.To refuse to receive the call: Select or press the switch on the steering wheel. ● The rst call is put on hold.2. Check that the call waiting screen is displayed. ● (Swap) : Select to change parties. Each time (Swap) is selected, the party who is on hold will be switched. ● (Merge): Select to change to a conference call. ●Select or press the switch on the steering wheel to end the current call and return to the conversation with the party on hold.
PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES)86Bluetooth PHONE MESSAGE FUNCTIONReceived messages can be forwarded from the connected Bluetooth phone, enabling checking and replying using the system.Depending on the type of Bluetooth phone connected, received messages may not be transferred to the message inbox.If the phone does not support the message function, this function cannot be used.1. Press .2. Select Phone (Phone).3. Select (Messages). ●The phone screen can be displayed by pressing the switch on the steering wheel. ●Type B/C only: The phone screen can be displayed by pressing .4. Check that the message inbox screen is displayed.Function PageReceiving a message 87Checking messages 87Replying to a message (quick reply) 88Sending a new short message 89Calling the message sender 89
PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES)87PHONE4RECEIVING A MESSAGEWhen an SMS/MMS is received, the incoming message screen pops up with sound and is ready to be operated on the screen.1. Select (Listen) to have messages read out. ● (Ignore): Select to not open the message.2. After checking the message, the following screen is displayed.No. FunctionSelect to have messages read out again.Select to reply the message. (→P.88)Select to cancel this function.NOTE lDepending on the cellular phone used for receiving messages, or its registration status with the system, some information may not be displayed. lWhen multiple text messages are received, a pop-up screen is displayed. Select (Inbox) to store the messages in the message inbox.CHECKING MESSAGES1. Display the message inbox screen. (→P.86)2. Select the desired message from the list.3. Select (Play Again).
PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES)88NOTE lDepending on the type of Bluetooth phone being connected, it may be necessary to perform additional steps on the phone. lOnly received messages on the connected Bluetooth phone can be displayed. lThe text of the message is not displayed while driving. lTurn the “” knob, or use the volume control switch on the steering wheel to adjust the message readout volume.REPLYING TO A MESSAGE (QUICK REPLY)1. Display the message inbox screen. (→P.86)2. Select the desired message from the list.3. Select (Reply).4. Select the desired message.5. Select Send (Send). ●Change (Change): Select to change the message. ●Cancel (Cancel): Select to cancel sending the message.NOTE l10 messages have already been stored.
PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES)89PHONE4SENDING A NEW SHORT MESSAGE1. Display the favorites list screen (→P.80), the recent calls list screen (→P.80) or the contact detail screen (→P.81).2. Select next to the desired number.3. Select the desired message.4. Select Send (Send). ●Change (Change): Select to change the message. ●Cancel (Cancel): Select to cancel sending the message.CALLING THE MESSAGE SENDERCalls can be made to an SMS/MMS message sender’s phone number.This operation can be performed while driving.1. Display the message inbox screen. (→P.86)2. Select next to the desired sender.3. Check that the “Calling (Calling)” screen is displayed.
MEMO90
91APPS55
BEFORE USING THE APPLICATION92BEFORE USING THE APPLICATIONBEFORE USING THE APPLICATIONPrecautions to be aware of when using the application are shown below.In this chapter, iPhone or Android devices will be referred to as a smartphone.WARNING lDo not connect or operate the smartphone while driving. lBe sure to park the vehicle in a safe location before connecting or operating the smartphone.CAUTION lDo not leave your smartphone in the car. In particular, high temperatures inside the vehicle may damage the smartphone. lDo not push down on or apply unnecessary pressure to the smartphone while it is connected as this may damage the smartphone or its terminal. lIf connecting your smartphone via USB, do not insert foreign objects into the USB port as this may damage the smartphone or its terminal.NOTE lDepending on the application, certain functions are not available while driving for reasons of safety. lIn order to maximize signal reception, performance and precision of the smartphone, please ensure the smartphone is placed as close to the system as possible, while ensuring it is stowed and secure while driving. lWhen connecting your smartphone via USB, use the original cables provided with your smartphone or equivalent third-party (certied) cables. lWhen the ignition switch is in the “ACC” or “ON” position, the battery of the connected smartphone is charged. lIf connecting your smartphone via USB, smartphone may not be recognized when the ignition switch is in the “ACC” or “ON” position. In this case, remove the smartphone and reconnect it. lThe accuracy of the displayed information or the signal reception performance depends on the smartphone or the connected device, and its wireless connection. lFor operating the smartphone, see the instruction manual that comes with it. lFollow the specic operation procedures for the smartphone application. lWhen connecting the device via Bluetooth, the communication speed may become slower than via USB.
BEFORE USING THE APPLICATION93APPS5SETTINGS REQUIRED TO USE THE APPLICATIONIn order to use the application on this system, the application must be installed on the smartphone. ●Search and download the application from your smartphone app.• iPhone: App Store via iTunes• Android device: Google Play Store ●Create an account and login to the application on the smartphone.NOTE lPlease use the latest version of the application.ABOUT APP-BASED CONNECTED CONTENTRequirements for using the connected content services of the application on this system. ●The latest version of the system is compatible with connected content application(s) for the smartphones, and is downloaded to your smartphone. ●A current account with a wireless content service provider. ●A smartphone data plan: If the data plan for your smartphone does not provide for unlimited data usage, additional charges from your carrier may apply for accessing app-based connected content via 3G, 4G, Wi-Fi, or 4G LTE wireless networks. ●Connection to the internet via 3G, 4G, Wi-Fi, or 4G LTE networks.NOTE lChanges to product specications may result in differences between the content of the manual and features of the product. lBe careful not to exceed the data usage limits for your smartphone. Doing so will result in additional data usage charges from your phone carrier.
BEFORE USING THE APPLICATION94NOTE lLimitations: • Access to app-based connected content will depend on the availability of wireless cellular and/or Wi-Fi network coverage for the purpose of allowing your smartphone to connect to the internet.• Service availability may be geographically limited by region. Consult the wireless connected content service provider for additional information.• Ability of this product to access connected content is subject to change without notice and could be affected by any of the following: compatibility issues with future rmware versions of the smartphone; compatibility issues with future versions of the connected content application(s) for the smartphone; changes to or discontinuation of the connected content application(s) or service by its provider. lSince some applications use signals from GPS satellites and wireless communication lines, they may not work properly in the following locations.• In tunnels• In underground parking lots• Outside wireless communication range, such as some countryside areas• Where the wireless communication network is congested, or where communications are restricted lDepending on the circumstances and environment, the signal may be weak or not be received. In such cases, an error may occur.NOTE lCommunication and phone call charges for smartphones should be paid by the wireless subscriber. lIf you lose the data in a smartphone or other device while using it with the system, no compensation will be given for the lost data. lFuji Heavy Industries does not guarantee content provided by the application. lThe application may not work due to factors on smartphones, smartphone applications or stations. Fuji Heavy Industries accepts no responsibility for this.
SUBARU STARLINK (TYPE A/B ONLY)95APPS5SUBARU STARLINK (TYPE A/B ONLY)SUBARU STARLINKThe SUBARU STARLINK function allows the system to link with a smartphone using Bluetooth.When connecting iPhone or Android devices with the SUBARU STARLINK application installed, you can control SUBARU STARLINK content through the system.To use the SUBARU STARLINK application, connect your iPhone or Android device via Bluetooth.When using the application, read the precautions indicated in “BEFORE USING THE APPLICATION”. (→P.92)DISPLAYING SUBARU STARLINK INFORMATION1. Run the SUBARU STARLINK application on your smartphone.2. Connect your smartphone by utilizing the Bluetooth connection. ●For details about registering or connecting your smartphone: →P.543. Select StarLink (StarLink) on the “Apps (Apps)” screen. (→P.28)4. Check that the “SUBARU STARLINK disclaimer (SUBARU STARLINK disclaimer)” screen is displayed.NOTE lWhen using the SUBARU STARLINK function, a disclaimer screen will be displayed. Be sure to fully read the contents before using the function. lThere may be times when StarLink (StarLink) does not appear immediately when the ignition switch is set in the “ACC” or “ON” position. If so, please wait.ABOUT THE SUPPORTED DEVICESThis system supports the following devices. ●iPhone: iOS 4.3.5 or later ●Android: Android 4.0 or later

Navigation menu