Harman BE2834 Automotive Infotainment Unit with Bluetooth/WLAN User Manual G31 Manual Part6

Harman International Industries, Inc. Automotive Infotainment Unit with Bluetooth/WLAN G31 Manual Part6

G31_Manual_Part6.pdf

4. Select the desired shortcut function. ●Depending on the function, select other items and enter necessary information.5. Check that the shortcut icon is displayed on the home screen.NOTE lThe home screen has 3 pages, and shortcut icons can be added to each page. The page can be changed by swiping.MOVING AND DELETING SHORTCUT ICONSUsers can rearrange the home screen buttons when the home screen shortcut function is turned on. (→P.62)1. Select and hold the shortcut icon. XWhen moving shortcut icons2. Drag the button to the desired position. ●User can move buttons to another page by dragging them to the corresponding end of the screen if the number of buttons allows for multiple pages. XWhen deleting shortcut icons2. Drag the button to the bottom of the screen.BASIC INFORMATION BEFORE OPERATION43BASIC FUNCTION2
Bluetooth® SETTINGS44Bluetooth® SETTINGSREGISTERING A Bluetooth PHONE/DEVICE FOR THE FIRST TIMEThe Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc.To use the hands-free system or the Bluetooth audio system, it is necessary to register a Bluetooth phone/device with the system.Once the Bluetooth phone/device has been registered, it is possible to use the hands-free system and the Bluetooth audio system.This operation cannot be performed while driving.For details on registering a Bluetooth phone/device: →P.481. Turn the Bluetooth connection setting of your Bluetooth phone/device on. ●This function is not available when the Bluetooth connection setting of your Bluetooth phone/device is set to off.2. Display the phone screen (→P.78) or the Bluetooth audio operation screen (→P.63).3. Select Yes (Yes) to register a Bluetooth phone/device.4. Follow the steps in “REGISTERING A Bluetooth PHONE/DEVICE” from “STEP 3” to “STEP 7” . (→P.48)
PROFILESThis system supports the following services.Bluetooth Device Spec. Function Requirements RecommendationsBluetooth Phone/Device Bluetooth Specication Registering a Bluetooth phone/device Ver. 1.1 Ver. 3.0 +EDRBluetooth Device Prole Function Requirements RecommendationsBluetooth PhoneHFP (Hands-Free Prole) Hands-free system Ver. 1.0 Ver. 1.6PBAP (Phone Book Access Prole) Transferring the contacts Ver. 1.0 Ver. 1.1.1MAP (Message Access Prole) Bluetooth phone message - Ver. 1.0PAN (Personal Area Networking Prole) APPS function - PAN 1.0DUN (Dial-Up Network Prole) APPS function - DUN 1.1SPP (Serial Port Prole) APPS function - Ver. 1.1 3Bluetooth® SETTINGS45SETTINGS3
Bluetooth Device Prole Function Requirements RecommendationsBluetooth DeviceA2DP (Advanced Audio Distribution Prole)Bluetooth audio systemVer. 1.0 Ver. 1.2AVRCP (Audio/Video Remote Control Prole) Ver. 1.0 Ver. 1.4NOTE lIf your cellular phone does not support HFP, registering the Bluetooth phone or using PBAP, MAP or SPP proles individually will not be possible. lIf the connected Bluetooth phone/device version is older than recommended or incompatible, the Bluetooth phone/device function may not work properly.Bluetooth® SETTINGS46
Bluetooth SETTINGS1. Press .2. Select Settings (Settings).3. Select Phone (Phone). XWhen registering a Bluetooth phone/device4. Select (Add Device). ●For details on registering a Bluetooth phone/device: →P.48 XWhen setting the Bluetooth phone/device4. Select the desired Bluetooth phone/device.5. Select the item to be set.No. Function PageConnecting or disconnecting Bluetooth phones/devices 49Deleting Bluetooth phones/devices 51Setting phonebook download 52Setting the automatic connection priority 52NOTE lThe phone settings screen can also be displayed by selecting (Change Device) on the phone overview screen (→P.78) or Bluetooth audio operation screen (→P.63). 3Bluetooth® SETTINGS47SETTINGS3
REGISTERING A Bluetooth PHONE/DEVICEUp to 5 Bluetooth phones/devices can be registered.Bluetooth compatible phones (HFP) and devices (AVP) can be registered simultaneously.This operation cannot be performed while driving.1. Display the phone settings screen. (→P.47)2. Select (Add Device). ●If a message appears, follow the guidance on the screen.3. When this screen is displayed, search for the device name displayed on this screen on the screen of your Bluetooth phone/device. ●Cancel (Cancel): Select to cancel the registration. ●For details on operating the Bluetooth phone/device, see the manual that comes with it.4. Register using your Bluetooth phone/device. ●A PIN-code is not required for SSP (Secure Simple Pairing) compatible Bluetooth phones/devices. Depending on the type of Bluetooth phone/device being connected, a message conrming registration may be displayed on the Bluetooth phone’s/device’s screen. Respond and operate the Bluetooth phone/device according to the conrmation message. ●8-inch with Navi system/8-inch system only: Registration of NFC compatible devices is completed when they are held near the audio system.Bluetooth® SETTINGS48
5. Select (Conrm). ●Cancel (Cancel): Select to cancel the registration.6. Check that the following pop-up screen may be displayed. ●Cancel (Cancel): Select to cancel the registration. ● If a conrmation message appears asking whether to transfer the phone’s contact data to the system, select the appropriate button.7. Check that the following pop-up screen is displayed when the connection is complete. ●If an error message appears, follow the guidance on the screen to try again.CONNECTING OR DISCONNECTING Bluetooth PHONE/DEVICEUp to 5 Bluetooth phones/devices (Phones (HFP) and devices (AVP)) can be registered.If more than 1 Bluetooth phone/device has been registered, select which Bluetooth phone/device to connect to. 1. Display the phone settings screen. (→P.47) 3Bluetooth® SETTINGS49SETTINGS3
2. Select the Bluetooth phone/device to be connected or disconnected. ●“Connected (Connected)” is displayed next to the currently connected Bluetooth phone/device. ●If the desired Bluetooth phone/device is not on the list, select (Add Device) to register the Bluetooth phone/device. (→P.48)3. Select (Connect) or (Disconnect). 4. Check that “Connected (Connected)” is displayed next to the Bluetooth phone/device when the connection is complete. ●If an error message appears, follow the guidance on the screen to try again.NOTE lIt may take time if the Bluetooth phone/device connection is carried out during Bluetooth audio playback. lDepending on the type of Bluetooth phone/device being connected, it may be necessary to perform additional steps on the Bluetooth phone/device.AUTO CONNECTION MODELeave the Bluetooth phone/device in a location where the connection can be established. ●When the ignition switch is in the “ACC” or “ON” position, the system searches for a nearby registered Bluetooth phone/device. ●The system will connect with the registered Bluetooth phone/device that was last connected, if it is nearby.Bluetooth® SETTINGS50
CONNECTING MANUALLY When the auto connection has failed, it is necessary to connect Bluetooth phones/devices manually.1. Press , and then select Settings (Settings).2. Select Phone (Phone).3. Follow the steps in “CONNECTING OR DISCONNECTING Bluetooth PHONE/DEVICE” from “STEP 2”. (→P.49)RECONNECTING THE Bluetooth PHONE/DEVICEIf a Bluetooth phone/device is disconnected due to poor reception from the Bluetooth network when the ignition switch is turned to the “ACC” or “ON” position, the system automatically reconnect the Bluetooth phone/device. ●If a Bluetooth phone/device is disconnected on purpose, such as turning it off, this does not happen. Reconnect the Bluetooth phone/device manually.DELETING Bluetooth PHONES/DEVICES1. Display the phone settings screen. (→P.47)2. Select the desired Bluetooth phone/device.3. Select Delete (Delete).4. Select Delete (Delete) when the conrmation message appears. 3Bluetooth® SETTINGS51SETTINGS3
SETTING PHONEBOOK DOWNLOADWhen this function is activated, the phonebook data of the connected phone will be downloaded automatically.1. Display the phone settings screen. (→P.47)2. Select the Bluetooth phone to be set.3. Select to turn “Phonebook Download (Phonebook Download)” on/off.NOTE lThe prole version of the connected Bluetooth phone may not be compatible with transferring phonebook data. For details, contact your SUBARU dealer.SETTING THE AUTOMATIC CONNECTION PRIORITYThe automatic connection priority of the registered Bluetooth phones/devices can be changed.1. Display the phone settings screen. (→P.47)2. Select the Bluetooth phone/device to be set.3. Select (Reorder).Bluetooth® SETTINGS52
4. Select next to the desired Bluetooth phone/device, and then drag it to the desired position. 3Bluetooth® SETTINGS53SETTINGS3
SETTING Wi-Fi® CONNECTION (8-inch with Navi system/8-inch system only)CONNECTING OR DISCONNECTING A Wi-Fi® NETWORK1. Display the general settings screen. (→P.62)2. Select (Wi-Fi Settings).3. Select the desired network. ● (Add New Network): Select to add a Wi-Fi® network (→P.55) ●When a network with is selected and the password entry screen is displayed, enter the password, and then select (Join).4. Select (Connect) or (Disconnect). ● (Forget This Network): Select to delete the item.5. Check that a conrmation message appears when the connection is complete. ●If an error message appears, follow the guidance on the screen to try again.54OTHER SETTINGS
ADDING A Wi-Fi® NETWORKAvailable networks which are not displayed by searching can be added.1. Display the general settings screen. (→P.62)2. Select (Wi-Fi Settings).3. Select (Add New Network).4. Enter the network name, and then select (Join).5. Select the security type.6. Enter the password, and then select (Join).7. Check that a conrmation message appears when the connection is complete.WARNING lUse Wi-Fi® devices only when safe and legal to do so. lThis system is tted with Wi-Fi® antennas. People with implantable cardiac pacemakers, cardiac resynchronization therapy-pacemakers or implantable cardioverter debrillators should maintain a reasonable distance between themselves and the Wi-Fi® antennas. The radio waves may affect the operation of such devices. lBefore using Wi-Fi® devices, users of any electrical medical device other than implantable cardiac pacemakers, cardiac resynchronization therapy-pacemakers or implantable cardioverter debrillators should consult the manufacturer of the device for information about its operation under the inuence of radio waves.Radio waves could have unexpected effects on the operation of such medical devices.NOTE lCommunication standards:• 802.11b• 802.11g• 802.11n (2.4GHz) lSecurity:• WPATM• WPA2TM lWPA and WPA2 are registered mark of the Wi-Fi Alliance®.55SETTINGS3OTHER SETTINGS●Communication standards: ・802.11b ・802.11g ・802.11n (2.4GHz/5GHz*) ・802.11a* ・802.11ac**: Depending on the country, this specification may not be available.●Security: ・WPA ・WPA2●WPA and WPA2 are registered mark of the Wi-Fi Alliance®.TMTM
MEDIA OPERATION56MEDIA OPERATIONCDOVERVIEWThe CD operation screen can be accessed with the following methods: ● Insert a disc. (→P.35) ●Select on the “Media (Media)” screen. (→P.79) XControl panelNo. FunctionTurn to adjust volume.Press to mute the audio system.Press and hold to turn the audio system on/off.Press to eject a disc.Disc slotTurn to change a track.Press and hold to display the sound settings screen. (→P.72)Press to change a track.Press and hold to fast forward/rewind. Press to switch between media sources.
XControl screenNo. FunctionSelect to switch between other media sources.Displays cover art.Select to display the play mode selection screen.• Select (Search OO) to narrow down the search for tracks in each play mode.Shows progress.The playback location can be changed by dragging the sliders.No. FunctionSelect to enable/disable repeat playback of the track currently playing.Select to change a track.Select and hold to fast forward/rewind.Select to pause/play.Select to enable/disable random playback for the tracks currently playing on the CD.NOTE lIf a disc contains CD-DA les and MP3/WMA/AAC les, only the CD-DA les can be played back. lIf a CD-TEXT disc is inserted, the title of the disc and track will be displayed. lDepending on the disc or music le being played, the cover art may not be displayed.MEDIA OPERATION57AUDIO6**: 8-inch with Navi system/8-inch system only
USB MEMORYAudio les on the USB memory device can be played back.OVERVIEWThe USB Audio playback screen can be accessed with the following methods: ● Connect a USB memory device. (→P.36) ●Select on the “Media (Media)” screen. (→P.79) XControl panelNo. FunctionTurn to adjust volume.Press to mute the audio system.Press and hold to turn the audio system on/off.Turn to change a track.Press and hold to display the sound settings screen. (→P.72)Press to change a track.Press and hold to fast forward/rewind.Press to switch between media sources.MEDIA OPERATION58
XControl screenNo. FunctionSelect to switch between other media sources.Displays cover art.Select to display the play mode selection screen.• Select (Search OO) to narrow down the search for tracks in each play mode.No. FunctionShows progress.The playback location can be changed by dragging the sliders.Select to enable/disable repeat playback of the track currently playing.Select to change a track.Select and hold to fast forward/rewind.Select to pause/play.Select to enable/disable random playback for the tracks currently playing from the USB memory device.WARNING lDo not operate the player’s controls or connect the USB memory device while driving.CAUTION lDo not leave your portable player in the vehicle. In particular, high temperatures inside the vehicle may damage the portable player. lDo not push down on or apply unnecessary pressure to the portable player while it is connected as this may damage the portable player or its terminal. lDo not insert foreign objects into the port as this may damage the portable player or its terminal.MEDIA OPERATION59AUDIO6**: 8-inch with Navi system/8-inch system only
NOTE lDepending on the device or music le being played, the cover art may not be displayed.iPodWhen an iPod is connected, you can play iPod music les. On this unit, you can perform operations such as selecting a le from a list or changing to the random playback mode.At devices which support Apple CarPlay, turn Apple CarPlay off in the device side Restrictions settings.OVERVIEWThe iPod operation screen can be accessed with the following methods: ● Connect an iPod. (→P.36) ●Select on the “Media (Media)” screen. (→P.79)MEDIA OPERATION60
XControl panelNo. FunctionTurn to adjust volume.Press to mute the audio system.Press and hold to turn the audio system on/off.Turn to change a track.Press and hold to display the sound settings screen. (→P.72)Press to change a track.Press and hold to fast forward/rewind.Press to switch between media sources. XControl screenNo. FunctionSelect to switch between other media sources.Displays cover art.Select to display the play mode selection screen.• Select (Search OO) to narrow down the search for tracks in each play mode.Shows progress.The playback location can be changed by dragging the sliders.MEDIA OPERATION61AUDIO6**: 8-inch with Navi system/8-inch system only*
No. FunctionSelect to enable/disable repeat playback of the track currently playing.Select to change a track.Select and hold to fast forward/rewind.Select to pause/play.Select to enable/disable random playback for the tracks currently playing on the iPod.*Select to fast forward the current content item in xed intervals.*Select to rewind the current content item in xed intervals.*: Display when playing Audiobooks or PodcastsWARNING lDo not operate the player’s controls or connect the iPod while driving.CAUTION lDo not leave your portable player in the vehicle. In particular, high temperatures inside the vehicle may damage the portable player. lDo not push down on or apply unnecessary pressure to the portable player while it is connected as this may damage the portable player or its terminal. lDo not insert foreign objects into the port as this may damage the portable player or its terminal.NOTE lWhen an iPod is connected using a genuine iPod cable, the iPod starts charging its battery. lIf playing iPod music, perform operation at the system. Certain functions may not be available if played directly from the iPod. Furthermore, depending on the connected iPod, certain functions may not be available. lDepending on the iPod or music le being played, the cover art may not be displayed. lWhen an iPod is connected and the audio source is changed to iPod mode, the iPod will resume playing from the same point it was last used. lTracks selected by operating a connected iPod may not be recognized or displayed properly.MEDIA OPERATION62

Navigation menu