Harrington Hoists Personal Lift Mr2 Users Manual 

TS2 to the manual 8fcba9a4-6a26-419a-bfbb-7ce3e4788307

: Harrington-Hoists Harrington-Hoists-Harrington-Hoists-Personal-Lift-Mr2-Users-Manual-564037 harrington-hoists-harrington-hoists-personal-lift-mr2-users-manual-564037 harrington-hoists pdf

Open the PDF directly: View PDF .
Page Count: 64

Download
Open PDF In Browser	View PDF

EFFECTIVE: March 11, 2013


ELECTRIC
CHAIN HOIST
NER2 / MR2 / TS2
FOOD GRADE MODEL
1/4 Ton through 2 Ton Capacities
Code, Lot and Serial Number


This equipment should not be installed, operated or
maintained by any person who has not read and understood
all the contents of this manual. Failure to read and comply
with the contents of this manual can result in serious bodily
injury or death, and/or property damage.

IMPORTANT INFORMATION ON HOW TO USE THIS MANUAL
This OWNER’S MANUAL SUPPLEMENT for Food Grade Hoists is intended for use in combination with:
“Owner’s Manual for Electric Chain Hoist ER2 and NER2 Series 1/8 through 5 Ton Capacity”
“Owner’s Manual for Motorized Trolley MR2 Series 1 Ton through 20 Ton Capacity”
“Owner’s Manual for Manual Trolley TS2/TF2 Series ½ Ton through 5 Ton Capacity”
Refer to the Main Table of Contents below to determine the location(s) of information pertaining to your hoist.
References to the Owner’s Manuals listed above will be designated by the use of the acronym “ER2OM”, “MR2OM”,
“TF2TS2OM”.

Main Table of Contents
Chapters

Page Number

I

Conformance Clarification Statement…………………………………………3

II

NER2 Electric Chain Hoist………………………………………………..……….4

III

MR2 Motorized Trolley……………………………………………………..……..11

IV

TS2 Manual Trolley……………………………………………………..…………15

V

Parts List……………………………………………………………………………..21
1.0 NER2……………………………………………………………………………..21
2.0 MR2……………………………………………………………………………….43
3.0 TS2………………………………………………………………………………..59

2

I
1.1

Conformance Clarification Statement
Food Grade Options


Harrington ER2 Food Grade hoists are designed for applications which require food grade hoists. All
products should be tested for suitability on a particular application prior to actual use. The
occupational Safety and Health Act of 1970 places the burden of compliance with the
owner/employer, not the manufacturer. Many OSHA requirements are not concerned or connected
with the manufactured product but are associated with the final installation. It is the owner’s
and user’s responsibility to determine the suitability of a product for any particular use. It is
recommended that all applicable industry, trade association, federal, state and local regulations be
checked. Read all operating instructions and warnings before operation.

1.2

Corrosion Resistance:
Standard Product Features and Benefits
•

Nickel plated load chain

•

•

The formulation of NEVASTANE HT/AW WHITE greases complies with the FDA chapter
21 CFR, 178.3570.
The formulation of NEVASTANE SL oils complies with the FDA chapter 21 CFR,
178.3570.
White epoxy painted hoist body, hooks, and suspenders

•

ASME H4 classification

•

Stainless steel and nickel plated components

•

Optional Product Features and Benefits
•

Nickel Diffused Load Chain

•

Stainless Steel Trolley Wheels

•

Nickel Plated shafts and suspenders

•

NEMA 4 pendant

•

Pendant Cover

•

Stainless Steel bottom hook

•

Stainless Steel chain spring and limiting plate

•

Stainless Steel chain container

3

II NER2 Electric Chain Hoist
Section

Page Number

1.0 Important Information and Warnings ……………………………………………………………..…….ER2OM
1.1

Terms and Summary

1.2

Warning Tags and Labels

2.0 Technical Information…………………………………………………………………………...……………6
2.1

Specifications

2.2

Dimensions

3.0 Preoperational Procedures …………………………………………………………………………..ER2OM
3.1

Gearbox

3.2

Chain

3.3

Mounting Location

3.4

Mounting the Hoist

3.5

Electrical Connections

3.6

VFD Setup (Dual Speed Only)

3.7

Preoperational Checks and Trial Operation

4.0 Operation …………………………………………………………………..……………………….....ER2OM
4.1

Introduction

4.2

Shall’s and Shall Not’s for Operation

4.3

Hoist Controls

5.0 Inspection ……………………………………………………………………………………..…..….. ER2OM
5.1

General

5.2

Inspection Classification

5.3

Frequent Inspection

5.4

Periodic Inspection

5.5

Occasionally Used Hoists

5.6

Inspection Records

5.7

Inspection Methods and Criteria
4

Section

Page Number

6.0 Maintenance & Handling ……………………………………...…………………………………………ER2OM
6.1

Count/Hour Meter

6.2

Lubrication – Load Chain, Hooks and Suspension………………………..….8 and ER2OM

6.3

Lubrication – Gearbox…………………………………………………….....…..8 and ER2OM

6.4

Motor Brake

6.5

Load Chain……………………………………………………………………....10 and ER2OM

6.6

Friction Clutch and Mechanical Load Brake with Friction Clutch

6.7

Storage

6.8

Outdoor Installation

6.9

Operational Environment

7.0 Troubleshooting ………………………………………………………………………………………….ER2OM
8.0 Warranty ………………………………………………………………………………………………….ER2OM
9.0 Parts List ………………………………………………………………………………………………………...21

5

Specifications
2.1.1

Product Code

2.1.2

Operating Conditions and Environment
Temperature range:
Humidity:
Noise Level:
Enclosure Rating:
Supply Voltage:

-4° to +104°F (-20° to +40°C)
85% or less
85 dB or less (A scale: measured 1 meter away from electric chain hoist
Hoist Meets IP 55
Single Speed Standard: Reconnectable 208/230-3-60 & 460V-3-60
Dual Speed Standard: 208/230V-3-60 or 460V-3-60

Single Speed

Hoist Duty Rating:
Intermittent Duty
Rating:
Short Time Duty
Rating:

Dual Speed

ISO M4/M5; ASME H4
60% ED
360 starts per hour
60 min.

40/20% ED
120/240 starts per hour
30/10 min.

Table 2-1 Hoist Specifications
Lifting Motor 3 Phase 60 Hz

Single
Speed

Cap.
(Tons)

Dual
Speed

2.1

Product Code

1/4
1/2

NER2003L-FG
NER2005L-FG

1

NER2010L-FG

2

NER2020L-FG

1/4

NER2003LD-FG

1/2

NER2005LD-FG

1

NER2010LD-FG

2

NER2020LD-FG

Standard
Lift
(ft)

Push
Button
Cord
L
(ft)

Lifting
Speed
(ft/min)

15
14
10

8.2
15/2.5
14/2.5

6

Output
(Hp)

Rated Current
(amps)

Load
Chain
Diameter
(mm)
x
Chain Fall
Lines

Net
Weight
(lbs)

Weight for
Additional
One Foot
of Lift
(lbs)

6.0 x 1

71

0.54

@208 230V

@460V

0.75

3.4

1.7

1.2

4.8

2.5

7.7 x 1

104

0.89

2.4

8.6

4.2

10.2 x 1

161

1.6

0.75

3.6

1.8

6.0 x 1

68

0.54

1.2

5.1

2.7

7.7 x 1

99

0.89

2.4

9.1

4.5

10.2 x 1

161

1.6

2.2

Dimensions
Table 2-2 Hoist Dimensions

Figure 2-1 Single Speed Hoist Dimensions
Capacity
(Tons)

Single
Speed

Dual
Speed

Product Code

Headroom
C
(in)

Headroom
w/Stainless
Hook C
(in)

14.6

Figure 2-2 Dual Speed Hoist Dimensions
a

b

d

e

g

(in)

(in)

(in)

(in)

(in)

17.7

20.2

13.7

9.5

10.6

1.1

g
w/Stainless
Hook
(in)

h

i

(in)

(in)

1.2

4.4

4.2

1/4

NER2003L-FG

1/2

NER2005L-FG

1

NER2010L-FG

16.9

21.2

23.2

14.8

11.4

11.7

1.2

1.5

5.1

4.6

2

NER2020L-FG

22.6

23.4

25.4

16.8

12.1

13.3

1.6

1.7

6.3

5.4

1/4

NER2003LD-FG

1/2

NER2005LD-FG

14.6

17.7

22.4

13.7

11.8

10.6

1.1

1.2

4.4

4.2

1

NER2010LD-FG

16.9

21.3

24.1

14.8

12.4

11.7

1.2

1.5

5.1

4.6

2

NER2020LD-FG

22.6

23.4

27.9

16.8

14.6

13.3

1.6

1.7

6.3

5.4

Table 2-3 Hook Dimensions
Capacity Code

003L, 005L,
003LD, 005LD

Hook

a
(in)

b
(in)

c
(in)

d
(in)

e
(in)

f
(in)

g
(in)

h
(in)

Stainless Bottom

1.5

0.9

1.2

0.9

1.7

1.8

1.2

4.3

Epoxy Painted
Top & Bottom

1.1

0.7

0.9

0.7

1.4

1.5

1.1

3.7

Stainless Bottom

1.9

1.1

1.6

1.1

2.0

2.2

1.5

5.4

Epoxy Painted
Top & Bottom

1.5

0.9

1.2

0.9

1.7

1.8

1.2

4.3

Stainless Bottom

2.2

1.4

1.9

1.4

2.4

2.5

1.7

6.3

Epoxy Painted
Top & Bottom

2.0

1.3

1.7

1.3

2.1

2.2

1.5

5.7

010L, 010LD

T = Top Hook
B = Bottom Hook

020L, 020LD

7

6.2

Lubrication – Load Chain, Hooks, and Suspension
6.2.1

Load Chain
•

For longer life, the load chain should be lubricated.

•

The load chain lubrication should be accomplished after cleaning the load chain with an acid
free cleaning solution.

•

Apply only Harrington Hoist, Inc. food grade lubricant (Part No. 2AFG003S1951) to the bearing
surfaces of the load chain links as indicated by the shaded areas in Figure 6-2. Also apply the
lubricant to the areas of the load chain (shaded areas in Figure 6-2) that contact the load
sheave. Ensure that the lubricant is applied to the contact areas in the load sheave pockets.

Figure 6-2 Chain Grease Application

•

6.2.2

6.3

The load chain should be lubricated every 3 months (more frequently for heavier usage or
severe conditions).

Hooks and Suspension Components
•

Hooks – Bearings should be cleaned and lubricated at least once per year for normal usage.
Use only Nevastane HT/AW 2 White Drum food grade lubricating grease. Clean and lubricate
more frequently for heavier usage or severe conditions.

•

Suspension Pins – Lubricate at least twice per year for normal usage; more frequently for
heavier usage or severe conditions.

Lubrication - Gearbox
6.3.2
6.3.3

DETERMINING OIL LIFE - Refer to Section 6.1.3 in the ER2OM when estimating gear oil life
based on operations.
NER2 OIL LEVEL – The oil level is checked by removing the oil plug on the side of the hoist as
shown in Figure 6-3 for NER2 hoists. The oil level should be just below the hole when the hoist is
level.

NER2 Hoists
Figure 6-3 Oil Plug Locations
8

6.3.5 REPLACING OIL – Change gear oil at least once every 5 years. The oil should be
changed more frequently depending on the hoist's usage and operating environment. Refer to
Section 6.1.3. Follow the procedure below for replacing the gearbox oil for your hoist:
• To drain the current oil from the hoist remove “Oil Plug” on top of the hoist and the “Oil
Drain plug” on the bottom of the hoist. Allow the old oil to drain completely. Refer to
Figure 6-4 for oil plug locations.

•



Dispose of the used oil in accordance with local regulations.

Figure 6-4 Oil Filling Diagram

•

Ensure that the oil plugs for the oil level check holes and the drain hole are reinstalled
and secured into the hoist body.

•

Refill the gear case with the correct quantity and type of new oil or until the oil level is
within the range shown in Table 6-6. Refer to Figure 6-4.

Table 6-6 Amount of Gear Oil
Quarts

Liters

NER2

NER2

003L/005L

0.57

0.54

010L

0.66

0.62

020L

1.37

1.30

Capacity Code



 Using an incorrect type/grade of gearbox oil or the wrong quantity of oil
may prevent the friction clutch from working properly and may affect the ability of the hoist to
hold the load. Only lubricants with NSF H1 compliance may be used in food grade hoists.
Refer to the following for the correct type of gearbox oil:
NER Gear Oil:
 Harrington standard: Nevastane SL 320 (Total Lubricants)

9

6.5

Load Chain
6.5.2

After chaining a unit, be sure to clean any exposed portions of bottom yoke bolts that have been
treated with thread locking compound. Conduct a thorough inspection of these bolts after
torquing to ensure there is no excess thread locking compound on the exposed portions. Failure
to do so could affect the hoist’s compliance with the application’s food grade requirements.

10

III

MR2 Motorized Trolley

Section

Page Number

1.0 Important Information and Warnings………………...……………………………………….....….MR2OM
1.1

Terms and Summary

1.2

Warning Tag and Labels

2.0 Technical Information…………………………………………………….………….…………………..….13
2.1

Specifications

2.2

Dimensions

3.0 Pre-operational Procedures..……………………………………………………………................MR2OM
3.1

Assembly and Adjustment

3.2

Mounting Location

3.3

Installation of Trolley onto Beam

3.4

Electrical Connections

3.5

VFD Setup (Dual Speed Only)

3.6

Pre-operational Checks and Trial Operation

4.0 Operation………………………………………………………………………………………………MR2OM
4.1

Introduction

4.2

Shall’s and Shall Not’s for Operation

4.3

Trolley and Hoist Controls

5.0 Inspection………………………………………………………………………..…………………….MR2OM
5.1

General

5.2

Inspection Classification

5.3

Frequent Inspection

5.4

Periodic Inspection

5.5

Occasionally Used Trolleys

5.6

Inspection Records

5.7

Inspection Methods and Criteria

11

Section

Page Number

6.0 Maintenance & Handling……………………………………………………………………………..MR2OM
6.1

Count/Hour Meter (Dual Speed Only)

6.2

Lubrication……………………………………………………..………………..14 and MR2OM

6.3

Brake

6.4

Storage

6.5

Outdoor Installation

6.6

Operational Environment

7.0 Troubleshooting……………………………………………………..………………………………..MR2OM
8.0 Warranty……………………………………………………………...………………………………. MR2OM
9.0 Parts List……………………………………………………………………………………………………...43

12

Specifications
2.1.1

Product Code for MR2 Trolley Alone:

2.1.2

Operating Conditions and Environment
Temperature Range:
Humidity:
Noise Level:
Enclosure Rating:
Supply Voltage:

Intermittent Duty Rating:
Trolley Duty Rating:

-4° to +104°F (-20° to +40°C)
85% or less (no condensation)
85 dB or less (A scale: measured 1 meter away from the electric chain
hoist)
Trolley Meets IP55, Pendant Meets IP 65
Standard 208-230/460V-3-60, Optional 575V-3-60, Special Voltages
Available
Single Speed – 40% ED 240 starts per hour
Dual Speed – 27/13% ED with 78/162 starts per hour
ISO M4/5; ASME H4

Table 2-1 Trolley Specifications
Capacity
(Ton)

Product Code

Standard
Beam Flange
Range

Single
Speed

(in)

Dual
Speed

2.0

1

MR2010L/S-FG

2.28 to 5.00

2

MR2020L/S-FG

3.23 to 6.02

1

MR2010SD-FG

2.28 to 5.00

2

MR2020SD-FG

3.23 to 6.02

Optional Beam
Flange Range
(in)

Min.
Allowable
Radius
for Curve
(in)

5.01 to 6.02 OR
6.03 to 12.00
6.03 to 7.02 OR
7.03 to 12.00
5.01 to 6.02 OR
6.03 to 12.00
6.03 to 7.02 OR
7.03 to 12.00

13

Motor***
Output
(Hp)

Current Draw
(amps)
208V or
460V
230V

Approx.
Net
Weight
(lbs)

31.5*

0.54

3.0

1.5

68

31.5**

0.54

3.0

1.5

84

31.5

0.54

3.0

1.5

75

31.5

0.54

3.0

1.5

93

2.2

Dimensions
Table 2-2 Trolley Dimensions

Dual
Speed

Single
Speed

For NER2003L-FG to
NER2020L-FG

6.2

Product
Code

b

b'

d

e

e'

i

j

k

m

n

r

t

MR2010L/S-FG

12.4

15.6

8.7

20.3

7.1

3.74

0.9

5.1

8.1

4.3

2.0

1.22

MR2020L/S-FG

12.8

16.4

8.9

20.5

7.2

4.33

1.1

4.9

8.4

4.7

2.4

1.42

MR2010SD-FG

12.4

15.6

8.7

20.3

7.1

3.74

0.9

5.1

8.1

4.3

2.0

1.22

MR2020SD-FG

12.8

16.4

8.9

20.5

7.2

4.33

1.1

4.9

8.4

4.7

2.4

1.42

Lubrication
6.1.1

Lubricate the following trolley components with only Nevastane HT/AW 2 White Drum food grade
lubricating grease.

6.1.2

Track Wheel Gear – Clean and re-grease the Track Wheel gears and motor output pinion every
three months (more frequently for heavier usage or severe conditions). Do not use an excessive
amount of grease and avoid getting any grease on the running surfaces of the Track Wheels or
the beam.

6.1.3

Gear Box – The reduction gearing in the motor should be cleaned and lubricated at least once
per year for normal usage. Clean and lubricate the reduction gear assembly more frequently for
heavier usage or severe conditions. Gain access to the gears by removing the four bolts that
mount the motor assembly to the trolley Side Plate. Make sure to properly orient and reuse the
neoprene gasket between the motor and Side Plate.

6.1.4

Suspension Pins, Bolts and Shafts – Grease at least twice per year for normal usage (more
frequently for heavier usage or severe conditions).

14

IV TS2 Manual Trolley
Section
1.0

2.0

3.0

4.0

5.0

Page Number

Important Information and Warnings………………….…………………………………………. TS2OM
1.1

Terms and Summary

1.2

Warning Tags and Labels

Technical Information …………………………………………….………………….……..........……. 17
2.1

Specifications

2.2

Dimensions

2.3

Optional Equipment

Pre-operational Procedures…………………………………………………………………….... TS2OM
3.1

Manual Hoist Adjustment for Trolley

3.2

Electric Hoist Adjustment for Trolley

3.3

Air Power Hoist Adjustment for Trolley

3.4

Trolley Assembly

3.5

Mounting Location

3.6

Installation of Trolley onto Beam

3.7

Electrical/Air Connections

3.8

Pre-operational Checks and Trial Operation

Operation………………………………………………………………………………………...…. TS2OM
4.1

Introduction

4.2

Shall’s and Shall Not’s for Operation

4.3

Trolley Controls

Inspection………………………………………………………………………………………….. TS2OM
5.1

General

5.2

Inspection Classification

5.3

Frequent Inspection

15

Section

6.0

Page Number

5.4

Periodic Inspection

5.5

Occasionally Used Trolleys

5.6

Inspection Records

5.7

Inspection Methods and Criteria

Maintenance & Handling………………………………………………………………………….. TS2OM
6.1

Lubrication……………………………………………………….……………….19 and TS2OM

6.2

Storage

6.3

Outdoor Installation

7.0

Warranty…………………………………………………………………………………………..…TS2OM

8.0

Parts List…………………………………………………………………………………………………... 59
8.1

TS2 Push Trolley Parts – 1/4 to 2 Ton

8.2

TS2 Geared Trolley Parts – 1/4 to 2 Ton

16

2.1

Specifications
Product Code for TS2 Trolley Alone:

Operating Conditions and Environment
Temperature Range:
Humidity:

-4° to +104°F (-20° to +40°C)
85% or less

Table 2-1 PTS2 Trolley Specifications
Cap.
(Tons)

Product Code

Min.
Radius
for
Curve
(in)

Flange Width Adjustability
B
(in)
Standard

Option

Approx. Net
Weight
(lbs)

4.01 to 8.00
1/2

PTS2005-FG

43.3

2.28 to 4.00

or

10

8.01 to 12.00
5.01 to 8.00
1

PTS2010-FG

51.2

2.28 to 5.00

2

PTS2020-FG

59.1

3.23 to 6.02

or

18

8.01 to 12.00
6.03 to 12.00

31

Table 2-2 GTS2 Trolley Specifications
Cap.
(Tons)

Product Code

Min.
Radius
for
Curve
(in)

Standard

51.2

2.28 to 5.00

Flange Width Adjustability
B
(in)
Option

Approx.
Net
Weight
(lbs)

5.01 to 8.00
1

GTS2010-FG

or

27

8.01 to 12.00
2

GTS2020-FG

59.1

3.23 to 6.02

17

6.03 to 12.00

42

2.2

Dimensions
Table 2-3 PTS2 Trolley Dimensions

PTS2005 to PTS2020
Cap.
(Tons)

Product
Code

a
max
(in)

a'
(in)

b
(in)

e
(ft)

h
(in)

i
(in)

j
(in)

k
(in)

m
(in)

n
(in)

r
(in)

s
(in)

t
(in)

v
(in)

1/2

PTS2005-FG

6.8

8.0

7.2

1.8

3.2

2.36

0.7

3.0

2.7

3.3

1.5

B-1.8

0.87

3.7

1

PTS2010-FG

8.5

9.8

9.3

2.2

4.2

2.80

1.1

3.7

3.1

4.4

2.0

B-1.9

0.98

4.2

2

PTS2020-FG

10.4

11.8

11.0

2.7

5.0

3.35

1.3

4.4

3.8

5.2

2.4

B-2.3

1.26

5.1

Table 2-4 GTS2 Trolley Dimensions

GTS2010 to GTS2020

Cap.
(Tons)

Product Code

a
max*
(in)

a’
max
(in)

1/2-1

GTS2010-FG

10.8

13.6

9.3

6.0

2

GTS2020-FG

13.7

15.2

11.0

6.1

b
(in)

e
(in)

f
(ft.)

10.5

h
(in)

i
(in)

j
(in)

k
(in)

k'
(in)

m
(in)

n
(in)

r
(in)

s
(in)

t
(in)

4.2

2.80

1.1

3.7

4.2

2.2

4.4

2.0 B-1.8 0.98

5.0

3.35

1.3

4.4

4.3

2.8

5.2

2.4 B-1.9 1.26

18

u
(in)

7.2

v
(in)
4.2
5.1

6.1

Lubrication
6.1.1

Lubricate the following trolley components with only Nevastane HT/AW 2 White Drum food grade
lubricating grease.

6.1.2

Track Wheel Gear – Clean and re-grease the Track Wheel gears and Hand Wheel output pinion every
three months (more frequently for heavier use). Do not use an excessive amount of grease and avoid
getting any grease on the running surfaces of the Track Wheels or the beam.

6.1.3

Trolley Wheel Bearings do not need to be lubricated and must be replaced if worn or damaged.

6.1.4

Suspension Pins, Bolts, and Shafts – Grease at least twice per year for normal usage (more frequently
for heavier usage or severe conditions).

19

This Page Intentionally Left Blank

20

V
1.0

Parts List
NER2 Parts List

When ordering parts, please provide the hoist code number, lot number and serial number located on the hoist
nameplate (see fig. below).
Reminder: To aid in ordering parts and product support, record the hoist code number, lot number and serial
number in the space provided on the cover of this manual.

NER2 Series Nameplate

The parts list is arranged into the following sections:
Section
Page
1.1 Housing and Motor Parts…………..…………….……………………………………………........22
1.2 Gearing Parts…………………………………………………………………………..................... 26
1.3 Hook and Chain Parts………………………………………………………………….…………... 30
1.4 Electric Parts (Single Speed)……………………………………………………………….……... 36
1.5 Electric Parts (Dual Speed)…………………………………………………………….………..... 38
1.6 Power Supply and Pendant Parts……………………………………...…………………………. 40
In the column "Parts Per Hoist" a designator is used for parts that apply only to a particular model or option.
Refer to Chapter 2, Section 2 for hoist model numbers and additional descriptions. The designators are:
S = Single Speed
D = Dual Speed
2V = 208/230 Volt Models
4V = 460 Volt Models

21

1.1 Housing and Motor Parts

Figure 1-1 Housing and Motor Parts

22

1.1 Housing and Motor Parts
Figure
No.
1
2
3

Part Name
Fan Cover
Fan
Snap Ring

Parts Per
Hoist
1
1
1

003L/LD

005L/LD
2AFG005L9107
ER2CL9108
9047113

010L/LD
2AFG010L9107
ER2CS9108
9047113

4

Brake Cover

1

ER2CL9115

ER2CS9115

5
6
7

Packing B
Set Pin S
Socket Bolt
Electromagnetic Brake
Assembly
Key B
Snap Ring
Socket Bolt
Spring Lock Washer
V Ring
Motor Shaft With Rotor
Ball Bearing
Ball Bearing
Motor Frame With
Stator
Packing M
Set Pin S
Socket Bolt

1
2
4

ER2CL9119

ER2CS9119

1

MBABB0ENA

MBABB09NA

1
2
3
3
1
1
1
1

ER2CL9360
9047116

ER2CS9360
9047124

J1WB07420080
ER2CS9210
ER2CL5502
9000904
9000904

J1WB07420100
ER2CS9210
ER2DL5502
9000905
9000922

8
9
10
11
12
13
14
15
16
17
18
19
20
21

ES120003
J1BEE0504522

9091254

1

3AFG005L5501

3AFG010L5501

1
2
4

ER2CS9118
ES120010S
J1BEE0803535

ER2DS9118
ER1DS9138
J1BEE1003535

3AFG005S6101

Body B Assembly

1

Oil Plug
Plug Packing
Snap Ring

1
1
1

9047262

9047268

25

Gear Case

1

3AFG005S6103

3AFG010S6103

26
27
28

Oil Plug
Plug Packing
Spring Pin

1
1
1

29

Packing G

1

30

Set Pin S

2

22
23
24

3AFG010S6101
E3S111003
E3S112003

E3S111003
E3S112003
E3S129005S
ER2CS9116

ER2DS9116
ES120003

31

Socket Bolt

4

9091262

32

Toothed Lock Washer

4

9679709
ER1BS9135

33

Oil Fill Plug

1

34

Eyebolt Packing
Name Plate
Load Side E
Oil Full Tag
Warning Sticker E
(Disconnect Power)
Name Plate OF (Correct
Oil Required)

1

ES127005S

1

ER1BS9960

1

ER1BS9953

1

ER2CS9936

1

2AFG003S9845

35
36
37
38
40

Name Plate AD (Speed
Letter)

41

Warning Sticker HW
(Hot Surface)

D

Check Voltage Label

S,2
V
S,4
V
D,2
V
D,4
V

43

1
1

ER1BL9868

ER1BL9868
ER2CI9806
ECP99NVVB
ECP99NVVA

1
ECP99NVWB
ECP99NVWA

23

1.1 Housing and Motor Parts

Figure 1-2 Housing and Motor Parts

24

1.1 Housing and Motor Parts
Figure
No.
1
2
3
4
5
6
7
8

Part Name
Fan Cover
Fan
Snap Ring
Brake Cover
Packing B
Set Pin S
Socket Bolt
Electromagnetic Brake
Assembly

Parts Per
Hoist
1
1
1
1
1
2
4

020L/LD
2AFG020L9107
ER2DS9108
9047116
ER2DS9115
ER2DS9119
ES120003
J1BEE0504522

1

MBABB18NA

9

Key B

1

ER2DS9360

10

Snap Ring

2

9047124

11
12
13
14
15
16

3
3
1
1
1
1

9091254
J1WB07420120
ER2DS9210
ER2EL5502
9000905
9000906

1

3AFG020L5501

18
19
20

Socket Bolt
Spring Lock Washer
V Ring
Motor Shaft With Rotor
Ball Bearing
Ball Bearing
Motor Frame With
Stator
Packing M
Set Pin S
Socket Bolt

1
2
4

ER2ES9118
ER2ES9138
J1BEE1204040

21

Body B Assembly

1

3AFG020S6101

17

Snap Ring

1

9047280

25

24

Gear Case

1

3AFG020L6103

26
27
28

Oil Plug
Plug Packing
Spring Pin

1
1
1

E3S111003
E3S112003
E3S129005S

29

Packing G

1

ER2ES9116

30

Set Pin S

2

ES120010S

31

Socket Bolt

4

9091286

32
33
34
35

Toothed Lock Washer
Oil Fill Plug
Eyebolt Packing
Name Plate Load Side E

4
1
1
1

9679711
ER1BS9135
ES127005S
ER1BS9960

36

Oil Full Tag

1

ER1BS9953

37

Warning Sticker E
(Disconnect Power)

1

ER2CS9936

38

Name Plate OF (Correct
Oil Required)

1

2AFG003S9845

1

ER1BL9868

1

ER2CI9806

1

ECP99NVVB
ECP99NVVA
ECP99NVWB
ECP99NVWA

40
41

43

Name Plate AD (Speed
Letter)
Warning Sticker HW
(Hot Surface)
Check Voltage Label

D
S,2V
S,4V
D,2V
D,4V

25

1.2 Gearing Parts

Figure 2-1 Gearing Parts

26

1.2 Gearing Parts
Figure
No.

Part Name

Parts
Per
Hoist

003L/LD

005L/LD

010L/LD

Load Sheave
Assembly
Load Sheave
Oil Seal
Ball Bearing

1

ER2CS6241

ER2DS6241

1
1
1

ER2DS9241
ES221010S

ER2DS9241
ES221010S

5

Ball Bearing

1

9000302

9000304

6

Load Gear

1

ER2CL9240

ER2DS9240

7
8
9

Snap Ring
Ball Bearing
Oil Seal

1
1
1

1
2
3
4

9000508

9047135
9000107
ES232005S

10

Ball Bearing

1

9000201

11

Oil Seal

1

E6F235003S

12

Pinion Assembly

1

13

Socket Bolt

3

14

Friction Clutch
Complete
Assembly

1

15

Wave Washer

1

E1DBX20S9311

16

Nut Cover

1

ER1CS9235

17

Name Plate FP
(Adjustment Of
Friction Clutch
Prohibited)

1

ER1BS9892

18

Gear B Assembly

1

ER2DL5262

19

Gear Holder
Plate Assembly

1

ER2DL6261

20

Gear Holder
Plate

1

ER2DL9261

21

Ball Bearing

1

9000101

22

Ball Bearing

1

9000100

23

Set Pin S

2

ES120003

24

Socket Bolt

3

9091252

25

Spring Lock
Washer

3

9012709

ER2CS5220

ER2DS5220
90912149

ER2CL1223

ER2DL1223

27

1.2 Gearing Parts

Figure 2-2 Gearing Parts

28

1.2 Gearing Parts
Figure
No.
1
2
3
4
5

Part Name
Load Sheave
Assembly
Load Sheave
Oil Seal
Ball Bearing
Ball Bearing

Parts
Per
Hoist

020L/LD

1

ER2ES6241

1
1
1

ER2ES9241
ER2ES9221
9000609

1

9000405

6

Load Gear

1

ER2EL9240

7
8
9
10
11

Snap Ring
Ball Bearing
Oil Seal
Ball Bearing
Oil Seal 22

1
1
1
1
1

9047150
9000110
ER2ES9244
9000303
ER1DS9233

12

Pinion Assembly

1

ER2EL5220

13

Socket Bolt
Friction Clutch
Complete
Assembly
Wave Washer
Nut Cover
Name Plate FP
(Adjustment Of
Friction Clutch
Prohibited)

3

90912149

1

ER2EL1223

1
1

ER1DS9234
ER1DS9235

1

ER1BS9892

18

Gear B Assembly

1

ER2EL5262

19

Gear Holder
Plate Assembly

1

ER2EL6261

20

Gear Holder
Plate

1

ER2EL9261

21

Ball Bearing

1

9000202

22

Ball Bearing

1

9000201

23

Set Pin S

2

ES120010S

24

Socket Bolt

3

9091275

25

Spring Lock
Washer

3

9012711

14
15
16
17

29

1.3 Hook and Chain Parts

Figure 3-1 Hook and Chain Parts
*Optional stainless steel chain container assembly not shown. See Figure No. 45 on part number chart for ordering information.

30

1.3 Hook and Chain Parts
Figure
No.
1
2

3

5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23

24
25
26
27
28
29
30
31
32
33
34
35
35
43
44

45

Part Name
Top Hook Assembly
Hook Latch
Suspender E (For Push Trolley) –
White Epoxy Paint
Suspender E (For Push Trolley) –
Nickel Plated
Suspender E (For Geared Trolley) –
White Epoxy Paint
Suspender E (For Geared Trolley) –
Nickel Plated
Connection Yoke P (For Push Trolley) –
White Epoxy Paint
Connection Yoke G (For Geared Trolley) –
White Epoxy Paint
Yoke Bolt
Slotted Nut
Split Pin
Suspender T (For Motorized Trolley) –
White Epoxy Paint
Suspender T (For Motorized Trolley) –
Nickel Plated
Top Pin
Plate A
Socket Bolt
Shaft Clip
Chain Guide A
Chain Guide B
Socket Bolt
Spring Lock Washer
Limit Lever
Limit Lever Pin
Limit Lever Spring
Cushion Rubber – Standard
Cushion Rubber – Stainless Steel
Stopper Assembly – Standard
Stopper Assembly – Nickel Plated
Bottom Hook Complete Assembly –
White Epoxy Paint
Bottom Hook Complete Assembly –
Stainless Steel
Hook Latch
Plastic Chain Container Assembly
(Max. Lifting Height 20ft)
Plastic Chain Container
Plastic Container Spring Assembly
Canvas Chain Container Assembly
(Max. Lift Height 50ft)
Canvas Chain Container
Socket Bolt
Lever Nut
Socket Bolt
Lever Nut
NP Load Chain
ND Load Chain
Washer
Spring Lock Washer
Stainless Steel Chain Container Assembly
– maximum 23 ft. lift
Stainless Steel Chain Container Assembly
– maximum 49 ft. lift

Parts
Per
Hoist
1
1

003L/LD

005L/LD
2ASF005S5101
2ASF005S1103
36FG0059004
37FG0059004

1
36FG0109004
37FG0109004
1

2AFG005S9027

1

2AFG005S9029

1
1
1

2AFG005S9032
J1NL00910100
J1PW06025018
2AFG010S9031

1
2AFG010S9831
2
1
1
1
1
1
4
4
1
1
1
2
2
1

WR2CS9121
ER2CS9123
J1BEE0601414
ER2CS9186
ER2CS9331
ER2CS9332
J1BEE0602525
J1WS07420060
ER2CS9337
ER2CS9338
WR2CS9357
ER1CS9053
27SF005S9117
ER1CS1041
2AFG005S1041
2AFG005S1011

1
2ASF005S5211
1

2ASF005S1103

1

PBK2-C-FG

1
1

ER2CS1401
2AFG005S1416

1

BK2C2-FG

1
1
1
1
1
1
1
1
1

ER2CS5405
J1BEB0807528
J1NU00920080
J1BEB0604508
J1NU00920080
LCER2005NP-FG
LCER2005ND-FG
J1WB07420060
J1WS07420060
7042201

1
7042202

31

1.3 Hook and Chain Parts

Figure 3-2 Hook and Chain Parts
*Optional stainless steel chain container assembly not shown. See Figure No. 45 on part number chart for ordering information.

32

1.3 Hook and Chain Parts
Figure
No.
1
2
3

4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25

26
27
28
29
30
31
32
33
34
35
36
37
37
43
44
45

Part Name
Top Hook Assembly
Hook Latch
Suspender E (For Manual Trolley) –
White Epoxy Paint
Suspender E (For Manual Trolley) –
Nickel Plated
Connection Yoke P (For Push Trolley) –
White Epoxy Paint
Connection Yoke G (For Geared Trolley) –
White Epoxy Paint
Yoke Bolt
Slotted Nut
Split Pin
Suspender T (For Motorized Trolley) –
White Epoxy Paint
Suspender T (For Motorized Trolley) –
Nickel Plated
Top Pin
Plate A
Socket Bolt
Shaft Clip
Chain Guide A
Chain Guide B
Socket Bolt
Spring Lock Washer
Machine Screw With Spring Washer
Guide Roller
Roller Pin
Limit Lever
Limit Lever Pin
Limit Lever Spring
Cushion Rubber – Standard
Cushion Rubber – Stainless Steel
Stopper Assembly – Standard
Stopper Assembly – Nickel Plated
Bottom Hook Complete Assembly –
White Epoxy Paint
Bottom Hook Complete Assembly –
Stainless Steel
Hook Latch
Plastic Chain Container Assembly
(Max. Lifting Height 20ft)
Plastic Chain Container
Plastic Container Spring Assembly
Canvas Chain Container Assembly
(Max. Lifting Height 50ft)
Canvas Chain Container
Socket Bolt
Lever Nut
Socket Bolt
Lever Nut
NP Load Chain
ND Load Chain
Washer
Spring Lock Washer
Stainless Steel Chain Container Assembly –
maximum 26 ft. lift
Stainless Steel Chain Container Assembly –
maximum 49 ft. lift

Parts
Per
Hoist

010L

1
1

2ASF010S5101
2ASF010S1103

1

36FG0109004
37FG0109004

1

2AFG005S9027

1

2AFG005S9029

1
1
1

2AFG005S9032
J1NL00910100
J1PW06025018
2AFG010S9031

1
2AFG010S9831
2
1
1
1
1
1
4
4
4
1
1
1
1
1
2
2
1

WR2CS9121
ER2CS9123
J1BEE0601414
ER2CS9186
ER2DS9331
ER2DS9332
J1BEE0802525
J1WS07420080
J1AP45001212
ER2DS9333
ER1CS9334
ER2DS9337
ER2DS9338
WR2CS9357
ER1DS9053
27SF010S9117
ER1DS1041
2AFG010S1041
2AFG010S1011

1
2ASF010S5211
1

2ASF010S1103

1

PBK2-D-FG

1
1

ER2DS1401
2AFG010S1416

1

BK2D2-FG

1
1
1
1
1
1
1
1
1

ER2DS5405
J1BEB0809028
J1NU00920080
J1BEB0604508
J1NU00920060
LCER2010NP-FG
LCER2010ND-FG
J1WB07420060
J1WS07420060
7042203

1
7042205

33

1.3 Hook and Chain Parts

Figure 3-3 Hook and Chain Parts
*Optional stainless steel chain container assembly not shown. See Figure No. 45 on part number chart for ordering information.

34

1.3 Hook and Chain Parts
Figure
No.
1
2
3

4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
27
28

29
30
31
32
33
34
35
36
37
38
39
39
45
46
47

Part Name
Top Hook Assembly
Hook Latch
Suspender E (For Manual Trolley) –
White Epoxy paint
Suspender E (For Manual Trolley) –
Nickel Plated
Connection Yoke P (For Push Trolley) –
White Epoxy Paint
Connection Yoke G (For Geared Trolley) –
White Epoxy Paint
Yoke Bolt
Slotted Nut
Split Pin
Suspender T (For Motorized Trolley) –
White Epoxy Paint
Suspender T (For Motorized Trolley) –
Nickel Plated
Top Pin
Plate A
Socket Bolt
Shaft Clip
Chain Guide A
Chain Guide B
Socket Bolt
Spring Lock Washer
Machine Screw With Spring Washer
Guide Roller
Roller Pin
Limit Lever
Limit Lever Pin
Limit Lever Spring
Limiting Plate – Standard
Limiting Plate – Stainless Steel
Chain Spring – Standard
Chain Spring – Stainless Steel
Cushion Rubber – Standard
Cushion Rubber – Stainless Steel
Stopper Assembly – Standard
Stopper Assembly – Nickel Plated
Bottom Hook Complete Assembly –
White Epoxy Paint
Bottom Hook Complete Assembly –
Stainless Steel
Hook Latch
Plastic Chain Container Assembly
(Max. Lifting Height 13ft)
Plastic Chain Container
Plastic Container Spring Assembly
Canvas Chain Container Assembly
(Max. Lifting Height 60ft)
Canvas Chain Container
Socket Bolt
Lever Nut
Socket Bolt
NP Load Chain
ND Load Chain
Stainless Steel Chain Container Assembly –
maximum 20 ft. lift
Stainless Steel Chain Container Assembly –
maximum 39 ft. lift
Washer
Spring Lock Washer

Parts
Per
Hoist

020L

1
1

2ASF020S5101
2ASF020S1103
36FG0209004

1
37FG0209004
1

2AFG020S9027

1

2AFG020S9029

1
1
1

2AFG020S9032
J1NL00920160
J1PW06040030
2AFG020S9031

1
2AFG020S9831
2
1
1
1
1
1
4
4
4
1
1
1
1
1
1
1
1
1

2AFG020S9121
ER2ES9123
J1BEE0601414
ER2ES9186
ER2ES9331
ER2ES9332
J1BEE0803030
J1WS07420080
J1AP46001212
ER1DL9333
ER1DL9334
ER2ES9337
ER2EL9338
WR2CS9357
ER1ES9054
27SF020S9118
ER1DL9051
2AFG020L9112
ER1ES9053
27SF020S9117
ER1ES1041
2AFG020S1041
2AFG020S1011

1
2ASF020S5211
1

2ASF020S1103

1

PBK2-E-FG

1
1

ER2ES1401
2AFG020S1416

1

BK2E2-FG

1
1
2
1
1
1

ER2ES5405
J1BEB1010032
J1NU00920100
J1BEB1007532
LCER2020NP-FG
LCER2020ND-FG
7042204

1
7042206
1
1

J1WB07420060
J1WS07420060

35

1.4 Electric Parts (Single Speed)

Figure 4-1 Electric Parts (Single Speed)

36

1.4 Electric Parts (Single Speed)
Figure
No.
1
2
3
4
5
6
7
8
9

10
11
12
13
14
15
16
17
18
22
23
24
25
26
27
28

Part Name

Parts
Per
Hoist

Limit Switch
Complete
Assembly
Socket Bolt
Spring Lock
Washer
Plate Assembly
Plate
Plate Screw
Transformer
Electromagnetic
Contactor
E-Stop
Contactor

003L

005L

020L

1

ER2CI1060

3

9091247

3

9012709

1
1
3
1

ER2GHM05L5A2
ER2CS9441

1

MGC23406C

TRF72V611

1

ER2GHM10S5A2
ER2GHM20L5A2
ER2DS9441
ER2ES9441
ER1BS9445
TRF73V611

MGC13306F**
MGC14306C**

1

Terminal Block
3P
Terminal Block
9P
Lead Wire
CH Meter
CH Meter
Support
Rectifier
Fuse
Fuse Holder
Name Plate CH
Terminal Block
6P
Fulcrum Pin
Cover
Suspender
Cover Belt
Socket Bolt
Plain Washer
Spring Lock
Washer
Packing C

010L

ECP1303AB

ECP1303AB
ECP1309AB

1
1

ER2GHM05L9A2

ER2GHM05S9A2
ECP91CHAE

1

ECP99BKBA

1
1
1
1
1

ECP94DIAA

9006275
ECP92FZAA
ECP99CHAA
ECP1306AD

ECP1306AD
ER2CS9449

1

ER2CS9456

1
1
1

ER2CS9457
9091249
ER1BS9436

1

9012709
ER2CS9117

ER2DS9117

ER2ES9117

32

Controller Cover

1

2AFG005S9104

2AFG010S9104

2AFG020S9104

33

1

ER2BHM05S9A5

ER2BHM10S9A5

ER2BHM20S9A5

35

Name Plate B
Pan Head Mach.
Screw
Socket Bolt

4

J1BEE0504022

J1BEE0604024

36

Washer

1

J1WB07420050

J1WB07420060

34

F

ECP93DIAA

1

1

ER2GHM20S9A2

2

9798534

**Refer to the alpha-numeric code on contactor. The code “S-U12” corresponds to MGD13306F.
The code “S-N11” corresponds to MGC13306H. The code “CLK-25J3” corresponds to MGC14306C.

37

1.5 Electric Parts (Dual Speed)

Figure 5-1 Electric Parts (Dual Speed)

38

1.5 Electric Parts (Dual Speed)
Figure
No.

Part Name

Parts Per
Hoist

Limit Switch
Complete
Assembly
Socket Bolt
Spring Lock
Washer
LS Harness

1
2
3
4

5

Plate Assembly

6
7
8

Inverter Assembly

10
11

Interface Board
Board Support

12

Transformer

13
14
17
18
19
20
21
22
23
24
25
26
27

Controller Cover
Resistor Cover

28

Braking Resistor

34
29
30
31
32
33

Mach. Screw
w/Spring Washer
Name Plate B
Pan Head
Machine Screw
Socket Bolt
Toothed Lock
Washer
Washer

1

ER2CI1060

3

9091247

3

9012709

1

ER2CI9554

020LD

1

ER2LHE05J5A2

ER2LHE10J5A2

ER2LHE20J5A2

F, 2V

1

ER2BHE05J5A2

ER2BHE10J5A2

ER2BHE20J5A2

M, 4V

1

ER2LHN05J5A2

ER2LHN10J5A2

ER2LHN20J5A2

F, 4V

1

ER2BHN05J5A2

ER2BHN10J5A2

ER2BHN20J5A2

1
3
1

ER2CI9441

M, 2V
F, 2V
M, 4V
F, 4V

1

INV60FH24
INV60FH21
INV60FM24
INV60FM21

1
1
2V
4V

Rectifier
Terminal Block 6P
Machine Screw
Fulcrum Pin
Cover Suspender
Cover Belt
Socket Bolt
Plain Washer
Spring Lock
Washer
Packing C
Controller Cover
Assembly

010LD

M, 2V

Plate
Plate Screw
Bushing

9

005LD

1
1
1
2
1
1
1
1
1

ER2DI9441
ER1BS9445
ECP99JBAC
INV615H24
INV615H21
INV615M24
INV615M21
ECP91KB02
ECP99BKAA
TRF32C612
TRF32N612
ECP93DIAA
ECP1306AD
9798512
ER2CS9449
ER2CS9456
ER2CS9457
9091249
ER1BS9436

1
1
2V
4V

1
1
1

2V
4V

1

INV622H24
INV622H21
INV622M24
INV622M21

9012709
ER2CS9117
2AFG005I2104
2AFG005I1104
2AFG005I9104
2AFG005I9185
INV70EE16
INV70EY16

4
1

ER2EI9441

ER2DS9117
2AFG010I2104
2AFG010I1104
2AFG010I9104
2AFG010I9185
INV718E16
INV718Y16

ER2ES9117
2AFG020I2104
2AFG020I1104
2AFG020I9104
2AFG020I9185
INV718E16
INV718Y16

JAW44001212
ER2BHM05I9A5

ER2BHM10I9A5

2

ER2BHM20I9A5

9798534

4

J1BEE0504022

J1BEE0604024

4

J1WS07420050

J1WS07420060

4

J1WB07420050

J1WB07420060

39

1.6 Power Supply and Pendant Parts

Figure 6-1 Power Supply and Pendant Parts (Plug Connection)

40

1.6 Power Supply and Pendant Parts
Figure
No.
1
2

3
4

Part Name
Cord Support
(Wire Stop)
Mach. Screw
W/Spring
Washer
Socket Frame
Complete
Assembly
Socket Frame

5

Socket 4P
Assembly

6

Tapping Flat
Head Mach.
Screw

7

Socket 8P
Assembly

8

9
10
11
12
13
14
15
17

18

Mach. Screw
W/Spring
Washer
Mach. Screw
W/ Spring
Washer
Socket Frame
Packing
Power Supply
Cable 4C
Assembly
Power Supply
Cable 4C
Plug 4P
Cable
Support Arm
Cable
Support 12
Assembly
Cable Hanger
14 Assembly
Pendant
W/Cord
Complete
Assembly

19

Pendant Cord

20

Pendent
Assembly

21

Plug 8P

22
23
24
25

Warning Tag
PB
Tag Holder
Machine
Screw
Nut

Parts
Per
Hoist

S
D

010L/LD

ER1BS9534

2

J1AP45001212

1

1

2AFG005S4511
2AFG005I4511

1

S
D
S
D
S
D

2AFG020I4511

2AFG005S9511
ER2CS2523
ER2CI2523
ER2CS2523

ER2CS2564
ER2CI2564

ER2EI2564
ES650005S

6

J1AP45002020

1

ER2CS9512

1

ZBZA12CH1000

ft

16/4

1

ECP2304AD

1

ER1BS9541

1

ES822003

A/R

ES1527003
ZB10025H1000

1

ft
1
1

ER2ES2523
ER2EI2523

ES558003

2

S
D

2AFG020S4511

2AFG010I4511

8
S
D

020L/LD

1

1
S
D

005L/LD

ZB20025I1000
16/4P
16/6P
SWD1100AAH
SWD2200AAH
ECP2108AA
ECP2108AB

1

WTAG7

1

E3S787003

1

J1AP24002608

1

9093414

Note: A/R = As required, one every 5 ft. of Power Supply Cable.

41

This Page Intentionally Left Blank

42

2.0

MR2 Parts List

When ordering parts, please provide the trolley code number, lot number and serial number located on the hoist
nameplate (see fig. below).
Reminder: To aid in ordering parts and product support, record the trolley code number, lot number and serial
number in the space provided on the cover of this manual.

MR2 Series Name Plate
The parts list is arranged into the following sections:

Section 1/4 to 2 Ton
2.1
2.2
2.3
2.4
2.5

Page

Electric Parts – 1/4 to 2 Ton………………………….………………………………...………….. 44
Pendant Parts – 1/4 to 2 Ton ……………………………………………………………………… 48
Power Supply Parts – 1/4 to 2 Ton ……………………………………………………….………. 50
Side Plates and Suspension Parts – 1/4 to 2 Ton ………………………………………..…….. 52
Motor Parts – 1/4 to 2 Ton ………………………………………….………………….………….. 54

In the column "Parts Per Trolley" a designator is used for parts that apply only to a particular model or option.
Refer to Chapter 3, Section 2 for MR2 trolley model numbers and additional descriptions.
The designators are:
S = Single Speed

W = SS/SS = Single Speed Hoist, Single Speed Trolley

D = Dual Speed

X = SS/DS = Single Speed Hoist, Dual Speed Trolley

PC = Plug Connection

Y = DS/SS = Dual Speed Hoist, Single Speed Trolley

2V = 208/230 Volt Models

Z = DS/DS = Dual Speed Hoist, Dual Speed Trolley
4V = 460 Volt Models

43

2.1 Electric Parts – 1/4 to 2 Ton (Single Speed)

Figure 1-1 Electric Parts (Single Speed)

44

2.1 Electric Parts– 1/4 to 2 Ton (Single Speed)
Figure No.
1

Parts
Per
Trolley

Part Name
Connection Box Assembly
Holder A
Holder B

2
3

1
1
2

1 Ton

2 Ton

7038101

7038102
ECP5924AA
ECP5924AB

4

Packing

2

ECP5924AC

5
6

Holder Nut
Cord Cover

2
1

ECP5924AD
E6F630010S

7

Machine Screw With Spring Washer

8

J1AP45001010

9

Connection Box

1

3AFG010S9401

10

Connection Box Cover

1

3AFG010S9411

11

Connection Box Packing

1

MR1DS9421

12

Machine Screw With Spring Washer

4

J1AP45001010

13

Spacer

4

MS517010

14

Machine Screw With Spring Washer

4

J1AP48002020

15
16

Complete Plate Assembly
Plate

1
1

MR2RHM10M1A5
MR2DS5445

17

Machine Screw With Spring Washer

3

MS555010

18

Machine Screw With Spring Washer

2

MS556010

19

Machine Screw With Spring Washer

2

MS556010

20

Machine Screw With Spring Washer

2

MS556010

21
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48

Terminal 16P
Electromagnetic Contactor
E-Stop Contactor
Machine Screw With Spring Washer
Power Supply Cable Assembly
Holder A
Holder B
Packing
Holder Nut
Cable Packing
S.O. Cord 4C
Plug 4P
Control Cable Assembly
Holder A
Holder B
Packing
Holder Nut
Cable Packing
S.O. Cord 6C
Plug 8P
Socket 8P Assembly
Plate P
Cord Cover Packing
Warning Seal E (Electric Shock)
Wiring Diagram
Name Plate B
Name Plate C

1
1
1
4
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
1
1
1
1

ECP1416AA
MGC22306B
MGC12306B
MS554010
MR2DS1759

MR2ES1759
ECP5924AA
ECP5924AB
ECP5924AC
ECP5924AD

ECP6912AA
16/4
ECP2304AD
MR2DS1768

ECP6916AA
14/4
ECP2304AF
MR2ES1768

ECP5924AA
ECP5924AB
ECP5924AC
ECP5924AD
ECP6916AA
16/6P
ECP2108AC
MR2DS2811
ECP5924AH
MS527010
ER2CS9936
EWG3110H01
MR2SHM10S9A8
MR2SHM10S9A7
MR2SHM20S9A7

Name Plates for 1/8, 1/4, 1/2 & 1 1/2 Ton Capacities
Figure
No.
48

Part Name
Name Plate C

Parts
Per
Trolley
1

1/8 Ton

1/4 Ton

1/2 Ton

1 1/2 Ton

MR2SHM01S9A7

MR2SHM03S9A7

MR2SHM05S9A7

MR2SHM15S9A7

45

2.1 Electric Parts – 1/4 to 2 Ton (Dual Speed)

Figure 1-2 Electric Parts (Dual Speed)

46

2.1 Electric Parts– 1/4 to 2 Ton (Dual Speed)
Figure No.
1

Parts Per
Trolley
2V
1
4V
1
2
2
2
1
8
1
1
1
4
4
4
2V
1
4V
1
1
3
2
4
2V
1
4V
2V
1
4V
1
2
2
2
1
1
4
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2V
1
4V
1
2
1
1
1
1

Part Name
Connection Box Assembly

2
3
4
5
6
7
9
10
11
12
13
14

Holder A
Holder B
Packing
Holder Nut
Cord Cover
Machine Screw With Spring Washer
Connection Box
Connection Box Cover
Connection Box Packing
Machine Screw With Spring Washer
Spacer
Machine Screw With Spring Washer

15

Complete Plate Assembly

16
17
18
19
20

Plate
Plate B
Machine Screw With Spring Washer
Machine Screw With Washers
Machine Screw With Spring Washer

21

VFD Assembly

22

Braking Resistor

23
24
25
26
27
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46

Board Support
Machine Screw With Spring Washer
Machine Screw With Washers
Machine Screw With Spring Washer
Interface Board
Terminal 3P
Machine Screw With Spring Washer
Power Supply Cable Assembly
Holder A
Holder B
Packing
Holder Nut
Cable Packing
S.O. Cord 4C
4P Plug
Control Cable Assembly
Holder A
Holder B
Packing
Holder Nut
Cable Packing
S.O. Cord 6C
8P Plug

47

Socket 8P Assembly

48
49
50
51
52
53

Plate P
Cord Cover Packing
Warning Seal E (Electric Shock)
Wiring Diagram
Name Plate B
Name Plate C

1 Ton

2 Ton

7038201
7038203

7038202
7038204

ECP5924AA
ECP5924AB
ECP5924AC
ECP5924AD
E6F630010S
J1AP45001010
3AFG010S9401
3AFG010S9411
MR1DS9421
J1AP45001010
MS517010
J1AP48002020
MR2IHE10R1A5
MR2IHE20RIA5
MR2IHN10R1A5
MR2IHN20R1A5
MR2DI9441
MR2DI9443
MS555010
J1AW24000808
MS555010
INV604E31
INV604N31
INV904E34
INV904Y34
ECP99BKAB
MS555010
J1AW24000808
MS556010
ECP91KB12
ECP1403AA
MS554010
MR2DS1759
MR2ES1759
ECP5924AA
ECP5924AB
ECP5924AC
ECP5924AD
ECP6912AA
ECP6916AA
16/4
14/4
ECP2304AD
ECP2304AF
MR2DI1768
MR2EI1768
ECP5924AA
ECP5924AB
ECP5924AC
ECP5924AD
ECP6916AA
16/6P
ECP2108AC
MR2DI1811
MR2DI2811
ECP5924AH
MS527010
ER2CS9936
EWG3DD0H01
MR2SHM10S9A8
MR2SHM10S9A7
MR2SHM20S9A7

Name Plates for 1/8, 1/4, 1/2 & 1 1/2 Ton Capacities
Figure
No.
53

Part Name
Name Plate C

Parts
Per
Trolley
1

1/8 Ton

1/4 Ton

1/2 Ton

1 1/2 Ton

MR2SHM01S9A7

MR2SHM03S9A7

MR2SHM05S9A7

MR2SHM15S9A7

47

2.2 Pendant Parts – 1/4 to 2 Ton

Figure 2-1 Pendant Parts

48

2.2 Pendant Parts – 1/4 to 2 Ton
Figure
No.

Part Name

1

Push Button Cord 6C/7C/8C
Complete Assembly

8

Push Button Cord 6C
Push Button Cord 8C
Warning Tag PB
Tag Holder
Machine Screw With Spring
Washer
Nut

9

Plug 8P

4
5
6
7

10

11

5 Push Button Switch
Assembly

Parts Per
Trolley
W
X
Y
Z
W
X, Y, Z
1
1

1 Ton

1

1

1
1
W, PC
X, Y, Z,
PC
W
X
Y
Z

2 Ton
ZB1102AI1000
ZB1202AI1000
ZB2102AI1000
ZB2202AI1000
16/6P
16/8P
WTAG7
E3S787003
J1AP24002608
9093414
ECP2108AB

1

1

ECP2108AD
SWD2110ABH
SWD2120ABH
SWD2210ABH
SWD2220ABH

Bar Holder Assembly

1

MR1DS1481

12
13

Bar Holder
Cord Strain Relief Stopper

1
1

MR1DS9481
E6L614010S

14

Machine Screw w/Spring
Washer

2

E6F151003

15

Socket Bolt

2

J1BEE1002828

16

Spring Washer

2

J1WS07420100

49

2.3 Power Supply Parts – 1/4 to 2 Ton

Figure 3-1 Power Supply Parts

50

2.3 Power Supply Parts – 1/4 to 2 Ton
Figure No.

Part Name

Parts
Per
Trolley

1

Power Supply Cable 4C Assembly
Cable Packing
Cable Support 14 Assembly
Power Supply Cable 4C
Cable Hanger 14 Assembly
Cable Support Bar Assembly
Cable Support Bar
Cable Support Arm
Bolt
Spring Lock Washer
Nut
Wire Guide Assembly
Wire Guide
Wire Stopper
Machine Screw With Spring Washer
Bolt
Spring Lock Washer
Nut
Support Bar Holder (Plate)
Bolt
Spring Lock Washer
Cable Hanger Pusher (Beam 75mm)

1
1
1
1
A/R
1
1
1
1
1
1
1
1
1
2
1
1
1
1
2
2
1

ZBZC12AH1100
ZBZC12BH1100
ECP6914AA
ECP6916AA
M3ES0101724
14/4
12/4
ES1527003
MS1733020
MR1DS1491
MR1DS9491
MR1DS9492
9093328
9012711
9093424
MR1DS1493
MR1DS9493
MR1DS9496
M6F554010
9093328
9012711
9093424
MR1DS9501
9093329
9012711
3AFG010S9511

2
3
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22

1 Ton

2 Ton

23

Cable Hanger Pusher (Beam 100150mm)

1

3AFG010S9512

24
25
26
27
28
29
30

Socket Bolt With Spring Washer
Trolley Cable 6C Assembly
Holder A
Holder B
Packing
Cable Packing
Trolley Cable 6C

2
1
2
2
2
2
1

J1BGE1002828
MR2DS1793
ECP5924AA
ECP5924AB
ECP5924AC
ECP6912AA
16/6

*A/R = As Required, one for every 5 ft of power Supply Cable.

51

2.4 Side Plates and Suspension Parts – 1/4 to 2 Ton

Figure 4-1 Side Plates and Suspension Parts

52

2.4 Side Plates and Suspension Parts– 1/4 to 2 Ton
Figure
No.

Part Name
Side Plate G Assembly – Standard Wheels
Side Plate G Assembly – Stainless Steel
Wheels
Track Wheel G Assembly – Standard
Track Wheel G Assembly – Stainless Steel
Washer
Snap Ring – Standard
Snap Ring – Stainless Steel
Side Roller Assembly – Standard
Side Roller Assembly – Stainless Steel

2
3
4
5
6

Parts
Per
Trolley
1
2
2
2
4

1 Ton

2 Ton

3AFG010S5201

3AFG020S5201

3AFG010S5801

3AFG020S5801

MS1101010
35MW0105101
MS104010
9047115
J1SS10000015
MR1DS1211
3AFG010S2211

MS1101020
35MW0205101
MS104020
9047120
J1SS10000020
MR1ES1211
3AFG020S2211

8

Bolt

4

J1BAE0803030

J1BAE1003535

9
10

4
4

J1WS07420080
J1NA00920080
3AFG010S5202

J1WS07420100
J1NA00920100
3AFG020S5202

3AFG010S5802

3AFG020S5802

MS1102010
35MW0105102
J1WB07410080
9047115
J1SS10000015

MS1102020
35MW0205102
J1WB07410100
9047120
J1SS10000020

3AFG010S2101

3AFG020S2101

3AFG010S3101

3AFG020S3101

18

Spring Lock Washer
Nut
Side Plate S Assembly – Standard Wheels
Side Plate S Assembly – Stainless Steel
Wheels
Track Wheel S Assembly – Standard
Track Wheel S Assembly – Stainless Steel
Washer
Snap Ring – Standard
Snap Ring – Stainless Steel
Suspension Shaft Assembly – Standard
Shaft
Suspension Shaft Assembly – Nickel Plated
Shaft
Suspension Shaft – Standard
Suspension Shaft – Nickel Plated
Thick Spacer

3

MSF115010
3AFG010S9115
MSF116010

MSF115020
3AFG020S9115
T7G116030

19

Bolt

1

3AFG010S9103

3AFG020S9103

20

Slotted Nut

1

J1NL00910100

21

Split Pin

1

J1PW06025018

22
24

Thick Spacer L
Thin Spacer

2
8

MR1DS9110
MSF117010

MR1ES9110
MSF117020

25

Shaft Stopper

1

T6G156020

MS164020

26

Split Pin

1

27

Fixing Shaft – Standard
Fixing Shaft – Nickel Plated

1

28

Split Pin

2

J1PW06050040

30
31

Spring Washer
Nut

8
8

J1WS07420080
J1NA00920080
J1NA00920100

12
13
14
15

16

17

1
2
2
2

1

1

J1PW06040020
MR1DS9131
3AFG010S9131

MR1ES9131
3AFG020S9131

32

Bumper

4

MR1DS9631

33
34
35

Bumper Lug
Spring Washer
Nut

4
4
4

3AFG010S9361
3AFG020S9361
J1WS07420080
J1NA00920080

36

Bolt

8

J1BEB0803535

J1BEB1004526

37

Square Spacer

4

MS006010

MS006020

53

Extended Suspension Shaft Assemblies
Figure
No.

Part Name

Parts Per
Trolley

1 Ton

2 Ton

1

37FG010S1121

37FG020S1121

1

37FG010S3121

37FG020S3121

MSF181010

MSF181020

3AFG010S9181

3AFG020S9181

18

Extended Suspension Shaft
Assembly – Standard Shaft
Extended Suspension Shaft
Assembly – Nickel Plated
Shaft
Extended Suspension Shaft
– Standard
Extended Suspension Shaft
– Nickel Plated
Thick Spacer

9

MSF116010

T7G116030

19

Bolt

1

3AFG010S9103

3AFG020S9103

20

Slotted Nut

1

J1NL00910100

21

Split Pin

1

J1PW06025018

22
23
24

Thick Spacer L
Fixing Spacer
Thin Spacer
Fixing Shaft – Standard
Fixing Shaft – Nickel Plated

2
2
8

Split Pin

2

16

17

27
28

1

1

MR1DS9110
M7SE010S9182
MSF117010
MR1DS9141
3AFG010S9141

MR1ES9110
M7SE020S9182
MSF117020
MR1ES9141
3AFG020S9141

J1PW06050040

54

This Page Intentionally Left Blank

55

2.5 Motor Parts – 1/4 to 2 Ton

Figure 5-1 Motor Parts

56

2.5 Motor Parts – 1/4 to 2 Ton
Figure
No.

Parts
Per
Trolley

Part Name

1 Ton

2 Ton

2
3

Gear Box Packing
Set Pin

1
2

MR1DS9248
MR1DS9249

4

Bolt

4

J1BAE0802525

5

Spring Lock Washer

4

J1WS07420080

6

Washer

4

J1WB07400080

7

Motor Assembly

1

3AFG010S1321

8
9
10
11
12
13
14
15

Ball Bearing
Brake Drum Assembly
Brake Spring
Bumper
Guard
Motor Shaft With Rotor
Oil Seal
Motor Cover Assembly

1
1
1
1
1
1
1
1

9001004
MR1DS5261
MS304010
MR1DS9265
MR1DS9281
MR1DS5291
MR1DS9293
3AFG010S1301

16

Socket Bolt

4

J1BEE0802222

17
18
19
20
21
22
23
24
25

Motor Frame With Stator
Terminal Cover
Terminal Cover Packing
Coil Cover
Machine Screw With Spring Washer
Machine Screw With Spring Washer
Machine Screw With Spring Washer
Terminal 6P
Terminal Plate Holder

1
1
1
1
4
2
1
1
1

3AFG010S5321
MR1DS9324
MR1DS9325
MR1DS9326
J1AP45001010
MS556010
MS555010
ECP1306AB
MR1DS9855

26

Flat Head Tapping Screw

2

9096529

27

Motor Data Plate

1

IMNBH04VT

38

Washer

1

J1WD07420050

Figure
No.
28
29
30
31
32
33
34
35
36
37

Part
Name
Gear
Assembly
Gear #2
Gear #3
O Ring
Spacer
Ball
Bearing
Snap
Ring
O Ring
Snap
Ring
Ball
Bearing

Parts
Per
Trolley

1 Ton
S/SD

1 Ton
L/LD

2 Ton
S/SD

2 Ton
L/LD

1

MR1DS1241

MR1DL1241

MR1ES1241

MR1EL1241

1
1
1
1

MR1DS9241
MR1DL9241
MR1DS9241
MR1DL9241
MR1DS9242
MR1ES9242
9013316
MR1DS9244

1

9001211

2

9047120

1

MR1DS9254

1

9047120

1

E2D238125

57

This Page Intentionally Left Blank

58

3.0 TS2 Parts List
When ordering parts, please provide the hoist code number, lot number and serial number located on the hoist
nameplate (see fig. below).
Reminder: To aid in ordering parts and product support, record the hoist code number, lot number and serial number in
the space provided on the cover of this manual.

TS2 Series Nameplate

The parts list is arranged into the following sections:
Section ½ to 2 Ton

Page

3.1 TS2 Push Trolley Parts – 1/4 to 2 Ton……………………………………………………………….….….…...60
3.2 TS2 Geared Trolley Parts – 1/4 to 2 Ton………………………………………………………………………..62

59

3.1 TS2 Push Trolley Parts – 1/4 to 2 Ton

TS2 Push Trolley 1/4 to 2 Ton

60

3.1 TS2 Push Trolley Parts – 1/4 to 2 Ton
Figure
No.

1

2

3

Part Name
Side Plate S Assembly –
Standard Wheels
Side Plate S Assembly –
Stainless Steel Wheels
Name plate B
Name plate B – ¼ Ton
Track wheel S Assembly –
Standard
Track wheel S Assembly –
Stainless Steel

Parts
Per
Trolley

1/2 Ton

1 Ton

2 Ton

37FG0055112

37FG0105112

37FG0205112

37FG0055812

37FG0105812

37FG0205812

T6G800005P

T6G800010P

T6G800020P

T6G5102005

T6G5102010

T6G5102020

37TW0055102

37TW0105102

37TW0205102

2

1

80434

4

4

Slotted nut

4

J1NL00910100

5
6

Split pin
Track wheel washer

4
4

J1PW06020016

7

Snap ring

4

8a

8

Suspension Shaft Assembly –
Standard Shaft
Suspension Shaft Assembly –
Nickel Plated Shaft
Suspension Shaft – Standard
Suspension Shaft – Nickel Plated

MS104010

MS104020

J1SS10000015

J1SS10000020

36FG0051115

36FG0101115

36FG0201115

37FG0051115

37FG0101115

37FG0201115

T7G115005

T7G115010

T7G115020

37FG0059115

37FG0109115

37FG0209115

1

1

9

Thick spacer (qty)

X

T7G116005(4)

T7G116010(6)

T7G116020(6)

10

Thin spacer (qty)

X

T7G117005(10)

T7G117010(9)

T7G117020(8)

12

Shaft stopper pin

2

T6G156005

T6G156010

13

Split pin

2

14

Suspender E & G –
White Epoxy Paint
Suspender E & G –
Nickel Plated

1
Suspension Shaft Assembly
Extended – Nickel Plated Shaft

Suspension Shaft – Standard
22

1
Suspension Shaft – Nickel Plated

36FG0059004

36FG0109004

36FG0209004

37FG0059004

37FG0109004

37FG0209004

36FG0051136
{4.01 to 8.00”}
36FG0051181
{8.01 to 12.00”}

36FG0101136
{5.01 to 8.00”}
36FG0101181
{8.01 to 12.00”}

36FG0201181
{6.03 to 12.00”}

37FG0051136
{4.01 to 8.00”}
37FG0051181
{8.01 to 12.00”}

37FG0101136
{5.01 to 8.00”}
37FG0101181
{8.01 to 12.00”}

37FG0201181
{6.03 to 12.00”}

T7PA0059136
{4.01 to 8.00”}
T7PA0059181
{8.01 to 12.00”}
37FG0059136
{4.01 to 8.00”}
37FG0059181
{8.01 to 12.00”}

T7GA0109136
{5.01 to 8.00”}
T7GA0109181
{8.01 to 12.00”}
37FG0109136
{5.01 to 8.00”}
37FG0109181
{8.01 to 12.00”}
T7GA0109137
{5.01 to 8.00”}
T7GA0109182
{8.01 to 12.00”}
T6G156010

26

Fixing Spacer

2

T7PA0059137
{4.01 to 8.00”}
T7PA0059182
{8.01 to 12.00”}

27

Shaft Stopper Pin

*2

T6G156005

28

Split Pin

*2

29

Thin Spacer

X

30

Thick Spacer

T6G156020
J1PW06040020

1

Suspension Shaft Assembly
Extended – Standard Shaft
21

J1PW06032020

X

J1PW06032020

T7GA0209181
{6.03 to 12.00”}

37FG0209181
{6.03 to 12.00”}

T7GA0209182

T6G156020
J1PW06040020

T7G117005 (10)

T7G117010 (10)

T7G117020 (10)

T7G116005 (7)

T7G116010
{5.01 to 8.00”} - (5)
{8.01 to 12.00”} - (7)

T7G116020 (11)

*Quantity is 1 for 2 Ton.

61

3.2 TS2 Geared Trolley Parts – 1/4 to 2 Ton

TS2 Geared Trolley 1/4 to 2 Ton

62

3.2 TS2 Geared Trolley Parts – 1/4 to 2 Ton
Figure No.

1

2
3

Part Name
Side Plate S Assembly –
Standard Wheels
Side Plate S Assembly –
Stainless Steel Wheels
Name plate B**
Track wheel S Assembly – Standard
Track wheel S Assembly – Stainless Steel

Parts Per Trolley

1 Ton

2 Ton

37FG0105112

37FG0205112

37FG0105812

37FG0205812

T6G800010G

T6G800020G

1

1
2

T6G5102010

T6G5102020

37TW0105102

37FG0205812

4

Track wheel washer

4

MS104010

MS104020

5

Snap ring

4

J1SS10000015

J1SS10000020

6

Track wheel G Assembly – Standard
Track wheel G Assembly – Stainless Steel

2

T6G5101010
37TW0105101

T6G5101020
37TW0205101

Side Plate G Assembly
7
8
9

Side Plate G Assembly – Stainless Steel
Wheels
Hand chain guide Assembly
Hand wheel - Standard
Hand Wheel - White Epoxy Paint

1

37FG0105111

37FG0205111

37FG0105811

37FG0205811

1

37FG0105125
T6G123010

1

37FG0109123

10

Washer

1

J1WB07410120

11

Split pin

1

J1PW06030018

12

Lever nut

1

13

Pinion

1

14

Hand chain
Suspension Shaft Assembly –
Standard Shaft
Suspension Shaft Assembly –
Nickel Plated Shaft
Suspension Shaft – Standard

1

15a

15

Suspension Shaft – Nickel Plated

J1NU00920120
T7GC121010

T7GB121020
K7RA0500000

36FG0101115

36FG0201115

37FG0101115

37FG0201115

1

1

T7G115010

T7G115020

37FG0109115

37FG0209115

16

Shaft stopper pin

2

T6G156010

T6G156020

17

Split pin

2

T6GA0109117(9)

T6GA0209117(8)

18

Thick spacer (qty)

X

T7G116010(6)

T7G116020(6)

19

Thin spacer (qty)

X

T7G117010(9)

T7G117020(8)

23

Suspender E – White Epoxy Paint
Suspender E – Nickel Plated

1

Suspension Shaft Assembly
Extended – Standard Shaft
27

1

36FG0109004

36FG0209004

37FG0109004
36FG0101136
{4.01 to 8.00”}
36FG0101181
{8.01 to 12.00”}

37FG0209004
36FG0201181
{6.03 to 12.00”}

Suspension Shaft Assembly
Extended – Nickel Plated Shaft

37FG0101136
{4.01 to 8.00”}
37FG0101181
{8.01 to 12.00”}

37FG0201181
{6.03 to 12.00”}

Suspension Shaft – Standard

T7PA0109136
{4.01 to 8.00”}
T7PA0109181
{8.01 to 12.00”}

T7GA0209181
{6.03 to 12.00”}

Suspension Shaft – Nickel Plated

37FG0109136
{4.01 to 8.00”}
37FG0109181
{8.01 to 12.00”}

37FG0209181
{6.03 to 12.00”}

32

Fixing Spacer

2

T7GA0109137
{5.01 to 8.00”}
T7GA0109182
{8.01 to 12.00”}

T7GA0209182

33

Shaft Stopper pin

*2

T6G156010

T6G156020

34

Split Pin

*2

J1PW06032020

J1PW06040020

35

Thin Spacer

X

T7G117010 (10)

T7G117020 (10)

Thick Spacer

X

T7G116010
{5.01 to 8.00”} - (5)
{8.01 to 12.00”} - (7)

T7G116020 (11)

Hand Chain Master Link

1

28

36
37

1

C1FA0159843N

* Quantity is 1 for 2 Ton.
** For ¼ and ½ Ton capacities, Name Plate B will be relabeled at the factory.
63

www.harringtonhoists.com

Harrington Hoists, Inc.
401 West End Avenue
Manheim, PA 17545-1703
Phone: 717-665-2000
Toll Free: 800-233-3010
Fax: 717-665-2861

Harrington Hoists – Western Division
2341 Pomona Rd. No. 103
Corona, CA 92880-6973
Phone: 951-279-7100
Toll Free: 800-317-7111
Fax: 951-279-7500
ER2FGSUP
64



---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Encryption                      : Standard V4.4 (128-bit)
User Access                     : Print, Extract, Print high-res
Author                          : Bob Olson
Company                         : HARRINGTON HOISTS, INC.
Create Date                     : 2013:03:13 10:35:16-04:00
Modify Date                     : 2013:03:13 10:40:23-04:00
Source Modified                 : D:20130311190216
Subject                         : 
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Metadata Date                   : 2013:03:13 10:40:23-04:00
Creator Tool                    : Acrobat PDFMaker 10.1 for Word
Document ID                     : uuid:995db662-f93c-4f5a-a169-52fe2bac87a9
Instance ID                     : uuid:5d8bf37f-237a-488a-aa32-3b6b3e1e4bc4
Format                          : application/pdf
Title                           : 
Description                     : 
Creator                         : Bob Olson
Producer                        : Adobe PDF Library 10.0
Keywords                        : 
Page Layout                     : OneColumn
Page Count                      : 64

EXIF Metadata provided by EXIF.tools