User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 283872 |
| Application ID | Cm9UvHXOoAbCIBDAXUo/Wg== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 313.35kB (3916826 bits) |
| Date Submitted | 2002-11-15 00:00:00 |
| Date Available | 2002-11-15 00:00:00 |
| Creation Date | 2002-10-31 17:08:37 |
| Producing Software | Acrobat Distiller 4.0 for Macintosh |
| Document Lastmod | 2002-11-15 12:12:31 |
| Document Title | User Manual |
Contents What Is A Plasma Display Panel? .................................................................................................................. 2 What Are The Advantages Of Plasma? ......................................................................................................... 3 Important Safety Information .......................................................................................................................... 4 Overview Of Your New PDP ............................................................................................................................ 8 OSD Button.................................................................................................................................................. 8 OSD Key Function....................................................................................................................................... 8 Connecting To External Equipment ........................................................................................................... 9 RS-232C Configurations ............................................................................................................................. 10 Accessories ....................................................................................................................................................... 12 Optional Extras .................................................................................................................................................. 13 Controls Of The Remote Control .................................................................................................................... 14 Loading The Batteries ................................................................................................................................. 15 Reception Range Of Remote Control ........................................................................................................ 15 Monitor Installation ........................................................................................................................................... 16 Wall Mount Installation ................................................................................................................................... 16 Table Stand Installation.................................................................................................................................. 23 Speaker Installation ........................................................................................................................................ 25 Watching TV ....................................................................................................................................................... 26 Watching VCR.................................................................................................................................................... 27 Watching DVD.................................................................................................................................................... 28 Connecting The PC ........................................................................................................................................... 29 Displayable Monitor Specification ................................................................................................................. 30 Basic Operation ................................................................................................................................................. 31 Turning The Monitor TV On And Off .......................................................................................................... 31 TV Channel Selection ................................................................................................................................. 31 Volume Control ............................................................................................................................................ 31 OSD Structure.................................................................................................................................................... 32 PICTURE (TV&VIDEO) ...................................................................................................................................... 33 PICTURE (PC) .................................................................................................................................................... 35 SOUND (TV&VIDEO+PC) ................................................................................................................................. 37 MISC (TV&VIDEO+PC)...................................................................................................................................... 38 TV SET-UP .......................................................................................................................................................... 40 PIP (PC) ............................................................................................................................................................... 41 Hot Key Function By Remote Control ........................................................................................................... 42 Specification ...................................................................................................................................................... 43 Troubleshooting ................................................................................................................................................ 45 United Status Retail Warranty Card ............................................................................................................... 46 helios Plasma TV What Is A Plasma Display Panel? Plasma Monitor is the most advanced display solution for digital A/V integration used for Information Displays, Conference System as well as Home Theater. In the plasma image producing system, gas is confined in a 0.1mm-width space between two glass substrates with transparent electrodes. When voltage is applied between the electrode pairs, it causes an emission of ultraviolet light. This light reacts with RGB phosphors to produce multiple colors that are displayed as the final image. Plasma is an array of cells, known as pixels, which are composed of three sub-pixels, corresponding to the colors red, green and blue. Gas in a plasma state is used to react with phosphors in each sub-pixel to produce colored light (red, green or blue). Each sub-pixel is individually controlled by advanced electronics to produce over 16 million different colors. This means that you get perfect, easily viewable images in a display that is 3.3 inches thin. Transparent Electrode(ITO) ITO width / Gap / Snape Black Stripe BM / NO BM. Visitle Light Bus Electrode Low resistance materiel Bus width Bus positon Protection Layer(MgO) MgO quality & Thickness quality Dislectric layer Delectric Thickness Transmittance Dlelectric shape Barrier Rit Unbalanced pitch Stripe / well type Rib height SB / FB / EB type Phosphor Phosphor thickness long life phosphor White-back W/B material & reflection ratio helios Plasma TV Address Electrode Photo / Screen printing The width of address Gas Discharge Gas mixture & pressure Gatter test What Are The Advantages Of Plasma? 1/6 CRTPDP 160o PDP PDP CRT helios Plasma TV Important Safety Information WARNING HIGH VOLTAGE RISK OF ELECTRIC SHOCK DO NOT OPEN. CAUTION - TO PREVENT DAMAGE WHICH MAY RESULTIN FIRE OR SHOCK HAZARD. - DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. - SHOCK HAZARD DO NOT OPEN. WARNING This is Class B product. In a dommestic environment this product may cause radio interference in which case the user may be required to take adequate measures. WARNING To reduce the risk of fire and electrics shock, do not expose this product to rain or moisture. FCC NOTICE This device has been tested and found to comply with the limits for a Class B device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a commercial, industrial or business environment. This equipment can generate, use and radiate radio frequency energy and, if not installed and used in accordance with the instruction, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures : - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. Changes or modification not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Connecting of peripherals requires the use of grounded shielded signal cables. Always be careful when using your Monitor. To reduce the risk of fire, electrical shock, and other injuries, keep these safety precautions in mind when installing, using, and maintaining your machine. Read all safety and operating instructions before operating your Monitor. helios Plasma TV Keep the safety and operating instructions for future reference. Heed all warnings on the Monitor and in the operating instructions. Important Safety Information Follow all operating and use instructions. Unplug the Monitor from the wall outlet before cleaning. Use a damp cloth; do not use liquid or aerosol cleaners. Do not use the Monitor where contact with or immersion in water is a possibility, such as near bath tubs, sinks, washing machines, swimming pools, etc. Never add any attachments and/or equipment without approval of the manufacturer. Such additions can increase the risk of fire, electric shock, or other personal injury. Do not place the Monitor on an unstable cart, stand, tripod, bracket, table, or floor where it can fall. A falling Monitor can cause serious injury to a child or adult, and serious damage to the appliance. Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer or sold with the Monitor. Follow the manufacturer's manufacturer or sold with the Monitor. Follow the manufacturer's recommended by the manufacturer. Move the Monitor and cart with care. Quick stops, excessive force, and uneven surfaces can make the unit and cart unsteady and likely to overturn. Provide ventilation for the Monitor. The unit is designed with slots in the cabinet for ventilation to protect it from overheating. Do not block these openings with any object, and do not place the Monitor on a bed, sofa, rug, or other similar surface. Do not place it near a radiator or heat register. If you place the Monitor on a rack or bookcase, ensure that there is adequate ventilation and that you've followed the manufacturer's instructions for mounting. Use only the accessory cord designed for this product to prevent shock. The power supply voltage rating of this product is AC100-240V, the power cord attached conforms to the following power supply voltage. Use only the power cord designated by our dealer to ensure Safety and EMC. When it is used by other power supply voltage, power cable must be changed. Consult your product dealer. helios Plasma TV Important Safety Information Use only a grounded or polarized outlet. For your safety, this Monitor is equipped with a polarized alternating current line plug having one blade wider than the other. This plug will fit into the power outlet only one way. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug still does not fit, contact your electrician to replace your outlet. Avoid overhead power lines. An outside antenna system should not be placed in the vicinity of overhead power lines or other electric light or power circuits or where it can fall into such power lines or circuits. When installing an outside antenna system, be extremely careful to keep from touching the power lines or circuits. Contact with such lines can be fatal. Unplug the Monitor from the wall outlet and disconnect the antenna or cable system during a lightning storm or when left unattended and unused for long periods of time. This will prevent damage to the unit due to lightning and power-line surges. Protect the power cord. Power supply cords should be routed so that they won't be walked on or pinched by objects placed on or against them. Pay particular attention to cords at plugs, convenience receptacles, and the point where they exit from the unit. Do not overload the wall outlet or extension cords. Overloading can result in fire or electric shock. Do not insert anything through the openings in the unit, where they can touch dangerous voltage points or damage parts. Never spill liquid of any kind on the Monitor. helios Plasma TV Important Safety Information Ground outdoor antennas. If an outside antenna or cable system is connected to the Monitor, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges. Section 810 of the National Electrical Code, ANSI/NFPA No.70-1984, provides information about proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna discharge unit, connection to grounding electrodes, and requirements for the grounding electrode. Do not attempt to service the Monitor yourself. Refer all servicing to qualified service personnel. Unplug the unit from the wall outlet and refer servicing to qualified service personnel under the following conditions: • when the power-supply cord or plug is damaged • if liquid has been spilled on the unit or if objects have fallen into the unit • if the Monitor has been exposed to rain or water • if the Monitor does not operate normally by following the operating instructions • if the Monitor has been dropped or the cabinet has been damaged • when the Monitor exhibits a distinct change in performance Upon completion of any service or repairs to this Monitor, ask the service technician to perform safety checks to determine that the Monitor is in a safe operating condition. If you make adjustments yourself, adjust only those controls that are covered by the operating instructions. Adjusting other controls may result in damage and will often require extensive work by a qualified technician to restore the Monitor to normal. When replacement parts are required, be sure the service technician uses replacement parts specified by the manufacturer or those that have the same characteristics as the original part. Unauthorized substitutions may result in additional damage to the unit. helios Plasma TV Overview Of Your New PDP OSD Button OSD Button & Function 1 Input Signal Source Select 2 Audio Volume Up 3 Audio Volume Down 4 Remote Sensor & Power Indicator 5 Power (Stand By) OSD Key Function SELECT Select the signal source from multiple input source such as TV, AV1, AV2, S-Video, Component and Analog RGB. VOL- / VOL Change the audio level in normal display mode and move the scroll bar in Source select control menu. AUDIO INPUT TERMINAL Turn on and off the main power. helios Plasma TV Overview Of Your New PDP Connecting To External Equipment AC(POWER) INPUT TERMINAL Firmly insert the accessory power cord as far as it will go into the power input terminal. Firmly push the power cord plug as far as it will go into the power socket. RGB PC INPUT TERMINAL (VGA/SVGA/XGA) Connects to the computer monitor's (analog RGB) output terminal. Cables connecting the PC vary according to the type of machine, so consult your product dealer. AUDIO INPUT TERMINAL Connects to the audio output terminal of a video deck or similar device. helios Plasma TV Overview Of Your New PDP DVI INPUT(Optional) Connects DVI Computer Source (Digital Signal) here. RS-232C INPUT TERMINAL Control the monitor's functions externally by external equipment. Connects to the computer RS-232C output terminal. AV INPUT The Interface board is not equipped on PDP monitor. Contact your dealer for buying optional item. Line Out Audio signal output for external audio amplifier. Connectors AUDIO INPUT Pin Jack VIDEO INPUT BNC S-VIDEO INPUT S terminal COMPUNENT VIDEO INPUT BNC RGB INPUT 15-pin mD-sub RS-232C 9-pin D-sub RS-232C Configurations 10 helios Plasma TV • When connecting separately purchased BNC terminals, conversion connectors are required between the pin jacks and the BNC terminals, so purchase these also. • Cables connecting the PC vary according to the type of machine, so consult your product dealer. L Overview Of Your New PDP helios Plasma TV 11 Accessories Remote Control Handset Video Cable Owner's Manual 12 helios Plasma TV D-sub 15 pin cable Power Cord Audio Cable Alkaline batteries Optional Extras Side Mount Speaker Table Stand (type United) Fixed Wall Mount Bracket helios Plasma TV 13 Controls Of The Remote Control When using the Remote Control aim it at the Remote Control sensor of the Plasma TV. POWER Turns on and off the main power MUTE Mute on / off TV / VIDEO Select the signal source from multiple input source of TV, AV1, AV2, S-Video, Component and Analog RGB SLEEP TV off time setting, push button for 30 min, 60 min, 90 min and 180 min BRIGHT Change the brightness STILL Activate the temporary pause PIP Activate PIP function on PC Mode Number key Direct TV channel number input EXIT Exit from the current OSD menu or sub-menu CH Change the TV channel on TV mode up or down 14 VIDEO SIZE VOL+ / VOL- Change the image size setting, ie; 16:9, 4:3, etc. Change the audio level, increase or decrease MTS SET Exit from the current OSD menu or sub-menu Activate the OSD window, enter the sub-menu PREV.CH. CLOSED CAPTION Go back to previous TV channel Activate the closed caption function CH ADD/ERASE V-CHIP Edit the TV Channel preset Activate the V-Chip function helios Plasma TV Controls Of The Remote Control Loading The Batteries Press on the cover and slide in the direction of the arrow. Load two AA batteries, taking care that the + and - ends face the correct direction. Close the cover until it clicks. Reception range of remote control helios Plasma TV 15 Monitor Installation The Monitor can be installed in various ways such as Wall Mounting type, Table Stand type, etc.. Wall Mount Installation • Install this monitor only in a location where adequate ventilation is available. 16 helios Plasma TV Monitor Installation Installation Detach the monitor brackets from the wall mounting bracket: Pull the monitor brackets in the direction shown by arrow 1. Lift the monitor brackets in the direction shown by arrow 2. Lift the monitor brackets off the mounting frame in the direction shown by arrow 3. helios Plasma TV 17 Monitor Installation AS shown above, carefully place the Monitor screen side down on a cushioned surface that will protect the monitor and screen from damage. Insert the monitor brackets on the monitor as shown above. Install the 4 bolts securely, in the back of the monitor in the holes provided. Be sure the bracket hooks are at the top side of the monitor. 18 helios Plasma TV Monitor Installation How to fix anchors and bolts Drill the 6 hole positions as shown on page 21. Using an 8 mm drill appropriate for the material on the wall, drill each hole to a depth of 80mm~100mm. Clean each drilled hole. Insert an anchor supplied with the wall mounting bracket into each hole. Mount the wall mounting bracket on the wall using the 6 washers and bolts supplied. Adjust the bolt head angles as necessary, see above. helios Plasma TV 19 Monitor Installation Bolt the monitor wall-mount frame to the wall as shown above using holes 2, 3, 7, 12, 16, and 17. If it is necessary to use different holes than the ones indicated above, use only up to two (2) other holes. 20 helios Plasma TV Monitor Installation See A above, two people who are capable of lifting the weight of the monitor should do the following: Carefully lift up the monitor and place it in position on the wall mounting bracket securely as shown by arrow 1. Push the bottom of the monitor toward the wall as shown in arrow 2, so that the monitor will “click” into position onto the wall mounting bracket. • Be sure to lift a monitor / speakers assembly by the monitor only, do not lift using only the speakers. helios Plasma TV 21 Monitor Installation Wall Mount Accessories 6-Bolts for Wall mounting bracket 6-Wall Anchor Bolt Sleeves 4-Monitor Bracket Bolts 22 helios Plasma TV Monitor Installation Table Stand Installion • Table Stand mount minimum allowable clearances for adequate ventilation. helios Plasma TV 23 Monitor Installation Installation 24 helios Plasma TV Monitor Installation Speaker Installion Installation Speaker Accessories 4-Iron Plates (Mount speakers to monitor) 8-4 X 16 Long Bolts (Attach iron plates to speakers) 8-4 X 8 Short Bolts (Attach iron plates to monitor) 2-Speaker Wires helios Plasma TV 25 Watching TV To watch TV (When the Interface board is installed.) 26 Make sure if the signal source is TV. Press TV/VIDEO button on the remote control and select TV on OSD. Use CH+, CH- button or numeric button to change TV program for your channel selection. You can watch the previous channel by pressing PREV.CH. Button on Remote Control. Also, you can tune to cable service provided channels using the cable box. For further information regarding cable TV service, contact cable TV service provider(s). helios Plasma TV Watching VCR When connecting the Plasma Monitor with external equipments, match the colors of connecting ports (Video yellow, Audio(L) - white, Audio(R) - red). If you have a mono VCR, connect the audio cable from the VCR to the AUDIO(L/MONO) input of the Plasma Monitor. If you connect an S-VIDEO VCR to the S-VIDEO input, the picture quality is improved; compared to connecting a regular VCR to the Video input. Avoid having a fixed image remain on the screen for a long period of time. Typically a frozen still picture from a VCR 4:3 picture format or if a CH label is present. To watch VCR (When the Interface board is installed.) Press TV/ Video button on the remote control and select Video Sources. (When connection with S-Video, select the S-Video.) Insert a video tape into the VCR and press the PLAY button on the VCR. helios Plasma TV 27 Watching DVD How to connect (When the Interface board is installed.) Connect DVD video inputs to Y, PB, PR of COMPONENT (DVD INPUT) and audio inputs to Audio sockets of AV INPUT. How to use (When the Interface board is installed.) Press TV / Video button on the remote control of the monitor to select Component. Try this after turning on the DVD player. Component Input ports You can get better picture quality if you connect DVD player with component input ports as below. 28 helios Plasma TV Component ports of the Monitor PB PR Video output ports of DVD player Pb B-Y Cb PB Pr R-Y Cr PR Connecting The PC You can enjoy vivid picture and sound with connecting a PC with the Monitor. Connecting a PC to the PDP • Connect a PC (15pin) cable between the Video Output jack on the PC and the RGB in (15p D-SUB) on the PDP. Pin Configuration • 15Pin Signal Cable (based on protruded pin) Pin No. Description Red (R) Green (G) Blue (B) Grounding Grounding (DDC) Red (R) Grounding Green (G) Grounding Blue (B) Grounding Reserved 10 Sync Grounding 11 Grounding 12 Data (DDC) 13 Horizontal sync. 14 Vertical sync. 15 Clock (DDC) helios Plasma TV 29 Displayable Monitor Specification Resolution Horizontal Frequency (KHz) Vertical Frequency (Hz) 31.468 70.09 37.861 85.08 31.469 70.08 37.927 85.03 31.469 59.94 35.000 66.66 37.861 72.80 37.500 75.00 43.269 85.00 45.913 90.03 53.011 100.04 64.062 120.00 35.156 56.25 37.879 60.31 48.077 72.18 46.875 75.00 53.674 85.06 56.000 90.00 640 X 350 640 X 400 640 X 480 800 X 600 64.016 100.00 832 X 624 49.725 74.55 852 X 480 31.468 60.05 48.363 60.00 56.476 70.06 60.023 75.02 1280 X 1024 64.000 60.00 1366 X 768 48.387 60.00 1024 X 768 • Synchronization input form : separate • 852 x 480 : 42" Native Resolution Horizontal Polarity is Positive(+) Vertical Polarity is Negative(-) • 1366 x 768 : 50" Native Resolution Horizontal Polarity is Positive(+) Vertical Polarity is Negative(-) 30 helios Plasma TV Basic Operation Turning The Monitor TV On And Off Press the Power button on the remote control. The PDP will turn on and you will be ready to use it's features. You can also use the Power button on the front of the PDP. • If your Monitor isn't turned on when the power button is pressed: Press the MODE button to check if the Monitor mode has been chosen TV Channel Selection Make sure if the signal source is TV. Use CH+, CH- button or numeric button to change TV program for your channel selection. You can watch the previous channel by pressing PREV.CH. Button on Remote Control. Volume Control Use VOL+ / VOL- button Press MUTE button on Remote Control. helios Plasma TV 31 OSD Structure • OSD (On Screen Display) allows user to control or adjust various features and settings in accordance with his/her preferences. • Press the SET button on the Remote Control, you may see the OSD. e.g.) OSD menu on the video background PICTURE SOUND VOLUME TREBLE BASS BALANCE TV SETUP MODE AUTO CHANNEL FINE TUNE MTS 32 helios Plasma TV TV & VIDEO PC BRIGHTNESS CONTRAST COLOR HUE SHARPNESS TEMPERATURE BRIGHTNESS CONTRAST H-POSITION V-POSITION PHASE H-SIZE AUTO ADJUST MISC VIDEO SIZE OSD SHEET OSD POSITION SLEEP PIP PIP ON/OFF VIDEO SOURCE AUDIO SOURCE PIP POSITION PICTURE (TV & VIDEO) Adjust Brightness, Contrast, Color, Hue, Sharpness, Temperature on OSD menu. Press SET button to activate OSD. Press SET button again to get into PICTURE main menu. PICTURE BRIGHTNESS CONTRAST COLOR HUE SHARPNESS TEMPERATURE BRIGHTNESS Control the brightness of display by using left and right button. Dark Bright Distinct Vague Decrease Increase CONTRAST Control the contrast of display. COLOR Control the color saturation of display. helios Plasma TV 33 PICTURE (TV & VIDEO) PICTURE BRIGHTNESS CONTRAST COLOR HUE SHARPNESS TEMPERATURE HUE Control the color appearance from neutral to red or green or Blue. Bluish Greenish • Hue means that it is a difference of color toward Blue or Red color direction. SHARPNESS Control the sharpness of image edge. Less sharp Sharp Warm Cold TEMPERATURE Select the color temperature of screen image from Warm, Cool and Normal. 34 helios Plasma TV PICTURE (PC) Adjust Brightness, Contrast, H-Position, VPosition on OSD menu. Press SET button to activate OSD. Press SET button again to get into PICTURE main menu. PICTURE BRIGHTNESS CONTRAST H-POSITION V-POSITION PHASE H-SIZE AUTO ADJUST BRIGHTNESS Control the brightness of display. Dark Bright Distinct Vague CONTRAST Control the contrast of display. H-POSITION Moving the center of display image. After selecting Position menu, you can move the image using VOL -/+ buttons. V-POSITION Moving the center of display image. After selecting Position menu, you can move the image using VOL -/+ buttons. helios Plasma TV 35 PICTURE (PC) PICTURE BRIGHTNESS CONTRAST H-POSITION V-POSITION PHASE H-SIZE AUTO ADJUST PHASE Fine tuning of display accuracy on the screen. Only available when you are in PC/HD input mode. Mismatch Match Mismatch Match H-SIZE Adjust the horizontal size of display. Only available when you are in PC/HD input mode. Auto Adjust Automatically adjust picture position and eliminate any image shaking. 36 helios Plasma TV SOUND (TV & VIDEO + PC) - Control 'Volume, Treble, Bass and Balance' Adjust the Volume, Treble, Bass and Balance on OSD menu. Press SET button to activate OSD. Use DOWN button to go to SOUND main menu. Press SET button again to get into SOUND main menu. SOUND VOLUME TREBLE BASS BALANCE VOLUME Control the amount of volume of sound. Ranges from 0 to 100 TREBLE Control the high frequency component of the sound. Ranges from 0 to 100 BASS Control the low frequency component of the sound. Ranges from 0 to 100 BALANCE Control the left and right sound balance. helios Plasma TV 37 MISC (TV & VIDEO + PC) Image scaling, OSD display & time setting. MISC VIDEO SIZE OSD SHEET OSD POSITION SLEEP VIDEO SIZE You can change the scaling size of video on MISC main menu and VIDEO SIZE sub menu or by pressing VSIZE button on Remote Control. Fill Screen Fill the screen regardless of incoming aspect ratio Fit to Aspect Fit the screen with the same aspect ratio as signal source Letter Box Expand letter box contents to full screen. But you will notify the display quality worse than original mode due to the loss resolution caused by image expansion. (use only with letter box contents) TV mode Zooming more like a classical TV size, which is over-scanned. OSD SHEET Select the background pattern of OSD. "Opaque" and "Translucent" can be selected. "Opaque" set the OSD background as solid color. "Translucent" set the OSD background as half transparent. Changes the Transparency of background color of OSD window. Opaque 38 helios Plasma TV Translucent MISC (TV & VIDEO + PC) Image scaling, OSD display & time setting. MISC VIDEO SIZE OSD SHEET OSD POSITION SLEEP OSD POSITION Select OSD position among nine preset positions SLEEP: 30min > 60min > 90min > 180min Select your desirable setting time to turn off the TV automatically. 30 min, 60 min, 90 min, 180 min and “Off” can be selected. The timer will start to count down just after you select. helios Plasma TV 39 TV SET-UP TV CHANNEL SETUP MODE AUTO CHANNEL FINE TUNE MTS MODE select “Air” or “Cable”. If your TV set is connected antenna, select “AIR”, If you TV set is connected to the CABLE TV, select “CABLE” AUTO CHANNEL If you select “AUTO CHANNEL”, TV set will automatically scan available channel. If you want to exit auto channel scan, press “exit” key on IR Remote Control. FINE TUNE You can manually adjust the tuning precision by suing this function. MTS Select the audio mode on TV broadcasting. “AUTO”, “STEREO”, “MONO”, “L1” and “L2” can be selected. If you select “AUTO”, the TV set will select stereo mode if the channel broadcast in stereo mode, mmono mode otherwise” If you want to set sound mode as “MONO”, the set will sounds as mono mode even if the channel broadcasts with stereo mode. If the channel is broadcasting in Bi-lingual mode and if you want to listen to secondary language, you should select “L2”. The TV set will sounds with default language otherwise. 40 helios Plasma TV PIP (PC) PIP PIP ON/OFF VIDEO SOURCE AUDIO SOURCE PIP POSITION PIP(Picture in Picture) ON/OFF Select ON/OFF the PIP mode. You can choose ON/OFF mode using keys. VIDEO SOURCE Select the PIP video source. After selecting video source menu, you can change the source using keys. (TV>AV1>AV2>SVIDEO>COMPONENT) AUDIO SOURCE Select the audio source. When you select ‘PIP’ mode, you will hear PIP audio source. When you select ‘Main’ mode, you will hear Analog RGB audio source.you can change the source using keys. PIP POSITION Select PIP position among nine preset positions. helios Plasma TV 41 Hot Key Function By Remote Control CLOSED CAPTION Push Closed Caption button to activate closed caption menu. Use arrow control keys to access 2 channels of Closed Captions and 2 channels of Text. V-CHIP Push Closed Caption button to activate closed caption menu. Use arrow control keys to access 2 channels of Closed Captions and 2 channels of Text. V-CHIP MAIN INPUT PASSWORD MPAA Press SET TV GUIDELINE Press SET PASSWORD Press SET MPAA RATING TV GUIDELINE Select the block level. you can change the ‘SHOW’, ‘BLOCK’ by using VOLUME( ) keys. Select the TV guideline. you can change the ‘SHOW’, ‘BLOCK’ by using VOLUME( ) keys. TV GUIDELINE INPUT PASSWORD SHOW PG SHOW PG-13 SHOW SHOW NC-17 SHOW SHOW BLOCK CONTENT (TV GUIDELINE BLOCK CONTENT helios Plasma TV SHOW SHOW SHOW SHOW SHOW SHOW Press SET PASSWORD CHANGE CONTENT) You can change the ‘SHOW’, ‘BLOCK’ by using VOLUME( ) keys. 42 TV-Y TV-Y7 TV-G TV-PG TV-14 TV-MA CONTENT SHOW SHOW SHOW SHOW FV SHOW You can change the password. (4 characters) PASWORD CHANGE OLD NEW RETRY Specification 42” Plasma TV Display Panel 50” Plasma TV Display Panel Function and Specification Function and Specification 42-inch diagonal screen 50-inch diagonal screen Variable 4:3 / 16:9 image aspect ratios (4 modes) Variable 4:3 image aspect ratios (4 modes) 16:9 Panoramic mode 16:9 Panoramic mode 852 x 480 physical pixels 1366 x 768 physical pixels 800:1 contrast ratio 590:1 contrast ratio Brightness:630cd/m Brightness:560cd/m2 PC monitor support up to 1280 x 1024 60hz PC monitor support up to 1280 x 1024 60hz 181-Channel Cable-Ready TV tuner (NTSC in USA) 181-Channel Cable-Ready TV tuner (NTSC in USA) Advanced multi-window viewing: Advanced multi-window viewing: Picture-In Picture(PIP) with four selectable window positions Picture-In Picture(PIP) with four selectable window positions on PC mode on PC mode Multiple input compatible Multiple input compatible Advanced Motion digital processor Advanced Motion digital processor Motion-Adaptive Deinterlace Procesor Motion-Adaptive Deinterlace Procesor Digital progressive line scaling Digital progressive line scaling 3:2 Pull-Down for Film Scan Conversion 3:2 Pull-Down for Film Scan Conversion Digital 3D comb filter (NTSC in USA) Digital 3D comb filter (NTSC in USA) NTSC TV/CATV Tuner Module NTSC TV/CATV Tuner Module Closed Caption decoding (NTSC in USA) Closed Caption decoding (NTSC in USA) Favorite channel programming Favorite channel programming Channel lock/V-chip (NTSC in USA) Channel lock/V-chip (NTSC in USA) High Definition Component Video inputs: 480 i/p, 720p, 1080i High Definition Component Video inputs: 480 i/p, 720p, 1080i DVD Component Port : 480 i/p DVD Component Port : 480 i/p Automatic frequency detection Automatic frequency detection Selectable color temp. settings:Warm, Cool, User Selectable color temp. settings:Warm, Cool, User Miscellaneous Miscellaneous Built-in audio amplifier and two 7W speakers / Optional Built-in audio amplifier and two 7W speakers / Optional Selectable fixed/variable audio output / Optional Selectable fixed/variable audio output / Optional Quiet fanless operation Quiet fanless operation Input phase clock adjustment Input phase clock adjustment Front panel lock (via RS-232) Front panel lock (via RS-232) helios Plasma TV 43 Specification 42” Plasma TV Display Panel Connectivity: Connectivity: Composite:RCA-pin x 2 Composite:RCA-pin x 2 Component video signal : YPbPr x 1 Component video signal : YPbPr x 1 S-video : Mini DIN 4-pin x 1 S-video : Mini DIN 4-pin x 1 RGB input : D-sub 15-pin x 1, HD / SD RGB input : D-sub 15-pin x 1, HD / SD Audio input : RCA-pin Type(L/R) x 5:Full support seperated Audio input : RCA-pin Type(L/R) x 5:Full support seperated audio input audio input Speaker output : Cinch Conn Type(L/R) x 1(4cinch Speaker output : Cinch Conn Type(L/R) x 1(4cinch connectors type) connectors type) Audio system : Stereo Audio system : Stereo Control Ports : RS-232 D-sub 9-pin x 1 Control Ports : RS-232 D-sub 9-pin x 1 DVI input : DVI Cable / Optional DVI input : DVI Cable / Optional Accessories Accessories Full function remote control Full function remote control Table stand / Optional Table stand / Optional Side-mount Speakers / Optional Side-mount Speakers / Optional Dimensions : (W x H x D) unit : mm Dimensions : (W x H x D) 1050 x 635 x 87 (Main only) 1210 x 733 x 88 (Main only) 1250 x 635 x 87 (With stand, without Speaker) 1450 x 733 x 88 (With stand, without Speaker) 1050 x 708 x 299 (With stand and speaker) 1450 x 802 x 299 (With stand and speaker) Weight: Weight: 40kg (Main only) 52kg (Main only) 47kg (With stand, without Speaker) 57kg (With stand, without Speaker) 49.7kg (With stand and Speaker) 61kg (With stand and Speaker) Working Enviroment Working Enviroment Power : AC 110~240V, 50/60Hz Power : AC 110~240V, 50/60Hz Power Consumption : 380 Watts Power Consumption : 380 Watts Temperation Temperation Operation : 0 c~35 c(32 F~90 F) Operation : 0oc~35oc(32o F~90o F) Storage : -15oc~60oc(5o F~140o F) Storage : -15oc~60oc(5o F~140o F) Huminity Huminity Operation : 20~70% Operation : 20~70% Storage : 20~80% Storage : 20~80% Pressure 44 50” Plasma TV Display Panel Pressure Operation : 800~1114hPa Operation : 800~1114hPa Storage : 600~1114hPa Storage : 600~1114hPa helios Plasma TV unit : mm Troubleshooting Before you call a service technician, please scan this list of problems and possible solutions. It may save you time and money. Problem No picture & No sound Quick Action for Possible Solution Check whether the Monitor is turned on. Power cord inserted into wall outlet? Plug another product’s power cord into the wall outlet where the Monitor’s power cord was plugged in. Picture OK & No sound Press the VOLUME( ) button. Check the audio input signal. The remote control doesn't work Check to see if there is any object between the Plasma Display and the remote control causing obstruction. Check to see if the batteries are installed with the correct polarities. No or Poor color or Poor picture Select Color in the Picture and press VOLUME ( ) button. Keep a certain distance between the Monitor and the VCR. Activate any function to restore the brightness of the picture. Check to see that both the monitor and the source are plugged in and turned on. The image is too light or too dark Adjust the Brightness or Contrast settings. The image is too large or too small Adjust the Size settings. No output from one of the speakers Adjust Balance in the Sound Menu. Strange sound form the Monitor Typical sound due to normal Monitor operation, Monitor is not faulty. helios Plasma TV 45 United States Retail Warranty Helios is a product of S2 Technologies,LLC>(S2) www.flatcentral.com All Helios branded Products shall be free from defects in, materials for a period of twelve (12) months from the date of purchase from an authorized Helios Dealer and for a period of three (3) months for workmanship. This nontransferable warranty shall cover the original purchaser. This warranty shall cover normal usage conditions. Any product sold and / or used for a commercial application shall have a limited 90-day warranty for all parts and labor. To obtain warranty services in domestic USA and worldwide please call (954) 749-3100 for a manufacturer's return for service authorization. Return for service number and an original proof of purchase shall accompany all product returns for service. This warranty does not cover shipping charges, risk of loss during shipment, and export taxes, custom duties and taxes, or any other charges associated with transportation of the product to and from the repair facility. S-Squared retains the right to assess all warranty claims and to determine if damages are covered by the warranty. In case of a claim that is not covered by the warranty, you will be contacted to determine whether S-Squared should repair the damage for a fee or whether the product should be returned to you as received by S-Squared. During the warranty period, S-Squared may repair or replace defective parts with new or, at S-Squared's option, serviceable used or reconditioned parts that are equivalent to new parts in performance. All exchanged parts and products replaced under this warranty will become the property of S-Squared. All returns of LCD product shall be shipped double boxed as to prevent damage in transport and insured for full purchases value. All returns of Plasma products shall be shipped strapped, upright on a palette as to prevent damage in transport as well as insured for full purchases value. Please send all domestic USA returns to S-SQUARED's US domestic warranty service center at 5375 Hiatus Road, Sunrise, Florida 33351. For service in all territories outside of domestic USA, please contact your respective importer/distributor. This limited warranty excludes all product(s) that has been damaged or rendered defective (a) as a result of accident, misuse, or abuse; (b) operation outside the usage parameters stated in the product's User's Guide; (c) by the use of parts not manufactured or sold by S-Squared; (d) by modification of the product, or (e) as a result of service by anyone other than an authorized S-Squared service provider. S-Squared is not responsible for damages caused by the loss of any programs, data, or removable storage media. S-Squared is not liable for any damages caused by the product or the failure of the product to perform, including any lost profits, lost savings, incidental damages, or consequential damages. S-Squared is not liable for any claim made by a third party or made by you for a third party. This limitation applies whether damages are sought, or a claim made, under this warranty or as a loss claim (including negligence and strict product liability), a contract claim, or 46 helios Plasma TV United States Retail Warranty any other claim. This limitation of liability will be effective even if S-Squared or an authorized representative of SSquared has been advised by you of the possibility of any such damages. This limitation of liability, however, will not apply to claims for personal death or injury. THIS WARRANTY IS THE ONLY WARRAN–TY BY S-SQUARED WITH RESPECT TO HELIOS PRODUCTS AND NO OTHER WARRANTIES, CONDITIONS, REPRESENTATIONS OR GUARANTEES OF ANY KIND, WHETHER BY LAW OR CUSTOM, WRITTEN OR ORAL, EX–PRESSED OR IMPLIED, INCLUDING WITHOUT LIMITATION, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR PURPOSE, CONDI– TION OR DESIGN, OR CONFORMANCE WITH SAMPLE, SHALL APPLY. Any LCD or PDP display with more than 4 dead (or fixed color) pixels shall be considered a factory defect. A product of S2 Technologies, LLC 954.749.3100 URL : www.flatcentral.com helios Plasma TV 47 Memo 48 helios Plasma TV
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : No Create Date : 2002:10:31 17:08:37 Producer : Acrobat Distiller 4.0 for Macintosh Modify Date : 2002:11:15 12:12:31-08:00 Page Count : 50EXIF Metadata provided by EXIF.tools