Hastech HW098-R 2.4G wireless receiver User Manual

Shenzhen Hastech industries Co., Ltd 2.4G wireless receiver Users Manual

Users Manual

Download: Hastech HW098-R 2.4G wireless receiver User Manual
Mirror Download [FCC.gov]Hastech HW098-R 2.4G wireless receiver User Manual
Document ID2484855
Application IDZla2eZOLJZ+pCvK1gGd06w==
Document DescriptionUsers Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize23.61kB (295110 bits)
Date Submitted2014-12-25 00:00:00
Date Available2014-12-25 00:00:00
Creation Date0000-00-00 00:00:00
Document Lastmod0000-00-00 00:00:00
Document TitleUsers Manual

Anker® Ultra-Slim 2.4G Wireless Keyboard and receiver
Welcome Guide
FCC ID:2AC9LHW098-R
Package Contents
Anker Ultra-Slim 2.4G Wireless Keyboard
USB wireless receiver
Welcome Guide
Product Overview
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
Media
Play / Pause
Last Song
Next Song
Volume Up
Volume Down
Mute
Home
Search
Bookmark Webpage
Power Off
Insert
Print Screen
LED Indicator
Battery Insertion Slot
USB Wireless Receiver
On / Off Switch
Specifications
Wireless Specification
2.4G wireless
Product Dimensions
285 × 122 × 19mm / 11.2 ×
4.8 × 0.7in (L × W × H)
Product Weight
189g / 6.7 oz
Operating Range
Up to 10 meters / 33 feet
Modulation System
MSK
Battery Type
2 AAA batteries
Working Temperature
-10°C to +55°C
Key Life
3 million clicks
System Requirements
Windows 8 / Windows 7 /
Windows Vista / Windows
XP
Setup Instructions
1. Open the battery cover on the back of the keyboard and take it off.
2. Insert two AAA batteries (not included).
3. Take out the USB wireless receiver from the battery slot and plug it into your computer’s USB
port.
4. Replace the battery cover and you are ready to begin typing.
Replacing Batteries
When the batteries are running low, the LED indicator will turn red and begin to flash. Replace the
AAA batteries to continue typing.
Troubleshooting
If you have any problems using the keyboard, or you’re using a new Anker receiver, try the following
steps to pair the keyboard and receiver together again:
1. Unplug the USB receiver and then plug it back into the computer USB port.
2. Press the ESC and Q keys at the same time. The LED indicator will flash rapidly for about 5 seconds
and then go off. The receiver is now successfully paired to your keyboard.
FCC Statement:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause
undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used
in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct the interference by one
or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
Consult the dealer or an experienced radio/TV technician for help.
RF warning statement:
The device has been evaluated to meet general RF exposure requirement. The device can be used in
portable exposure condition without restriction.

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Page Count                      : 3
EXIF Metadata provided by EXIF.tools
FCC ID Filing: 2AC9LHW098-R

Navigation menu