Healthrider 831299300 User Manual S300I Manuals And Guides L0020035

HEALTH RIDER Treadmill Manual L0020035 HEALTH RIDER Treadmill Owner's Manual, HEALTH RIDER Treadmill installation guides

User Manual: Healthrider 831299300 831299300 HEALTHRIDER HEALTHRIDER S300I - Manuals and Guides View the owners manual for your HEALTHRIDER HEALTHRIDER S300I #831299300. Home:Fitness Equipment Parts:Health Rider Parts:Health Rider HEALTHRIDER S300I Manual

Open the PDF directly: View PDF .
Page Count: 30

Download
Open PDF In Browser	View PDF

Model No. 831.299300
Serial No.
Write the serial number in the space
above for future reference.

USER'S MANUAL

Serial Number Decal

LI:
;canned
HOFFMAN ESTATES, IL 60179

i_:=;i

www.healthrider.com
new products, prizes,
fitness tips, and much more!

TABLE OF CONTENTS
IMPORTANT PRECAUTIONS .................................................................
BEFORE YOU BEGIN .........................................
"..'_ ...........................
ASSEMBLY ......
_ ........................................................................
OPERATION AND ADJUSTMENT
.............................................................
HOW TO FOLD AND MOVE THE TREADMILL ..................................................
TROUBLE_SHOOTING
AND MAINTENANCE
...................................................
CONDITIONING GUIDELINES ...............................................................
PART LIST ...............................................................................
HOW TO ORDER REPLACEMENT PARTS ..............................................
FULL 90 DAY WARRANTY ...........................................................

3
5
6
7
21
22
24
26
Back Cover
Back Cover

Note: An EXPLODED DRAWING is attached in the center of this manual. Please save the EXPLODED DRAWING
for future reference.

;-*rt, t

HealthRider ° is a registered trademark of ICON Health & Fitness, Inc.

IMPORTANT

PRECAUTIONS

lO.Use
that

°_

sure that 1
)res-

ing of 400

voltage i-at.
minimum surge

19, Inspect and tighten all
every three monthsl "

-_-_
_-_'

The decals shown below have been placed on your treadmill. If a decal is missing or illegible, please call
our toll-free HELPLINE to order a free replacement decal (our HELPLINE is listed on the front cover of
this manual). Apply the decal in the location shown. Note: The large decal is shown at 38% of actual size.

whi!eoperatingor

BEFORE YOU BEGIN
Congratulations for purchasing the SOFTSTRIDER
S300i TM treadmill by HealthRide#. The SOFTSTRIDER
S300i offerS an impressive array of features to help
you achieve your fitness goals In the convenience of
your home. From the advanced console to the cushioned walking belt, the SOFTSTRIDER S300i is designed to make each workout more effective and enjoyable. And when you're not exemising, the SOFTSTRIDER S300i can be fo_ded away, taking less than
half the floor space of conventional treadmills.

""
have additional questions, please call our toll-free
HELPLINE at 1-800-736-6879, Monday through
Saturday, 7 a.m. until 7 p.m. Central Time (excluding
holidays). To help us assist you, please note the product model number and serial number before calling.
The model number is 831.299300. The serial number
can be found on a decal attached to the treadmill (see
the front cover of this manual for the location).
Before reading further, please familiarize yourself with
the parts that are labeled in the drawing below.

For your benefit, read this manual carefully before
using the SOFTSTRIDER S3O0i treadmill. If you

Hand Weights
Book Holder
Console

Handrail
Key/Clip

RIGHT SIDE

On/Off
Switch
Walking Belt
Circuit
Breaker
Foot Rail

BACK

Rear Roller
Adjustment Bolts-

Cushioned
Walking Platform

Power
Cord

*For information about the optional chest
pulse sensor, see page 20.
_'Water bottle is not included.
5

ASSEMBLY

Assembly requires two people. Place the treadmill in a cleared area and remove all packing materials. Do not
dispose of the packing materials until the treadmill is assembled. No tools are required.
Note: The underside of the treadmill walking belt is coated with high-performance lubdcant. During shipping, a
small amount of lubricant may be transferred to the top of the walking belt, the sides of the walking platform, or
the shipping carton. This does not affect treadmill performance. If there is lubricant on top of the walking belt or
on the sides of the walking platform, wipe off the lubricant with a soft cloth and a mild, non-abrasive cleaner.
1. With the help of a second person, carefully raise the
Uprights (103) until the Wheels (99) are resting on the
floor as shown.

2. Next, make sure that the Lock Knob Sleeve (68) is fully
inserted into the left Upright (103).

Remove the Lock Knob (67) from the Lock Pin (72). Make
sure that the Lock Pin Collar (70) and the Spring (69) are
on the Lock Pin. insert the Lock Pin into the left Upright
(103) and tighten the Lock Knob onto it.

3. Make sure that all parts are tightened before you use the treadmill. Place a mat beneath the treadmill
to protect the floor or carpet. For your benefit, we recommend that you familiarize yourself with the
TROUBLE-SHOOTING
AND MAINTENANCE section on pages 22 and 23.

OPERATION AND ADJUSTMENT
THE PERFORMANT

LUBE TM WALKING BELT

Your treadmill features a walking belt coated with
PERFORMANT LUBE TM, a high-performance lubricant.
IMPORTANT: Never apply silicone spray or other
substances to the walking belt or the walking platform. Such substances will deteriorate the walking
belt and cause excessive wear.

This product is for use on a nominal 120-volt circuit,
and has a grounding plug that looks like the plug illustreted in drawing 1 below, A temporary adapter that
looks like the adapter illustrated in drawing 2 may be
used to connect the surge suppressor to a 2-pole
receptacle as shown in drawing 2 if a properly
grounded outlet is not available.

HOW TO PLUG IN THE POWER CORD
!

_.}___

sOUrllge_
sBu°pp
ressor

Grounding Pin

Outlet

Grounding Plug"_

2
Grounded
Your treadmill, like any other type of sophisticated
electronic equipment, can be seriously damaged by
sudden voltage changes in your home's power.
Voltage surges, spikes, and noise interference can
result from weather conditions or from other appliances
being turned on or off. To decrease the possibility of
your treadmill being damaged, always use a surge
suppressor with your treadmill (see drawing I at
the right).
To purchase a surge suppressor, see your
HealthRider dealer or call toll-free 1-800366-7278
and order part number 14657. Use only a single-outlet surge suppressor that is UL 1449 listed as a transient voltage surge suppressor (TVSS). The surge
suppressor must have a UL suppressed voltage rating
of 400 volts or less and a minimum surge dissipation of
450 joules. The surge suppressor must be electrically
rated for 120 volts AC and 15 amps.
This product must be grounded. If it should malfunction or break down, grounding provides a path of least
resistance for electric current to reduce the risk of elec-

Outlet Box

pter

Surge Suppressor

The temporary adapter should be used only until a
properly grounded outlet (drawing 1) can be Installed
by a qualified electrician.
The green-colored rigid ear, lug, or the like extending
from the adapter must be connected to a permanent
ground such as a propedy grounded outlet box cover.
Whenever the adapter is used it must be held in place
by a metal screw. Some 2-pole receptacle outlet box
covers ere not grounded. Contact a qualified electrician to determine if the outlet box cover is
grounded before using an adapter.

tric shock. This product is equipped with a cord having
an equipment-grounding conductor and a grounding
plug. Plug the power cord into a surge suppressor,
and plug the surge suppressor into an appropriate
outlet that Is properly installed and grounded in
accordance with all local codes and ordinances.

DIAGRAM OF THE CONSOLE

A
D

G
Note: If there is a thin
sheet of clear plastic
on the face of the
console, remove it.

FEATURES OF THE CONSOLE
The treadmill console offers an impressive selection of
features to help you get the most from your exercise.
When the console is in the manual mode, the speed
and incline of the treadmill can be changed with a
touch of a button. As you exercise, the four displays
will show your workout time, the number of calories
you have burned, the distance you have walked, the
incline level of the treadmill, and the speed of the walking belt. If you purchase an optional handgdp pulse
sensor or chest pulse sensor, the console will also
show your heart rate.
The console also offers four preset workout programs.
Each program automatically controls the speed and in-clirieof the tmadm_ as it guides you through an effeCtive workout. The included hand weights can be used for
upper body exercise as well. If you purchase the optional chest pulse sensor, the console's two pulse programs can also be used. Each program controls the
speed and incline of the treadmill to keep your heart rate
within a preset range dudng your workouts.
The console also features advanced iFit.com technology. IFit.com technology is like having a personal
trainer right in your home. Using the included audio
cable, you can connect the treadmill to your home
stereo, portable stereo, or computer and play special
iFit.com CD programs (CD's are available separately).
IFit.com CD programs automatically control the speed
and incline of the treadmill as a persona_ trainer guides
you through every step of your workout. High-energy

music provides added motivation. Each CD features
two programs designed by certified personal trainers.
In addition, you can connect the treadmill to your VCR
and 'TV and play iFit.com video programs (videocassettes are available separately). Video programs offer
the same benefits as iFit.com CD programs, but add
the excitement of working out with a class and an
instructor--the hottest new trend at health clubs.
With the treadmill connected to your computer, you
can also go to our new Intemat site at www.iFit.com
and access basic programs that interactively control
the speed and incline of your treadmill to help you
achieve your specific exercise goals. Or, use iFit.com
audio and video programs directly from our internet
site. Visit www.iFit.com for complete details.
By adding an optional upgrade module to the treadmill,
you can use virtually endless features from our internet
site. See www.iFit.com to learn about other iFit.com
features.
To purchase iFit.com CD's, iFit.com videocassettes,
or an optional upgrade module, call toll-free 1-800-7350768. For information about the optional handgrip pulse
sensor or chest pulse sensor, see page 20.
To use the manual mode of the console, follow the
steps beginning on page 10. To use • preset program,
see page 12. To use a pulse program, see page 13.
To use iFit.com CD or video programs, see page 17.
To use iFit.com programs directly from our internet site, see page 19.

DESCRIPTION OF THE CONSOLE
Refer to the drawing on page 8 to identify the features
described below.
A. Water bottle holder--This holder keeps your water
bottle handy dudng your workouts (no water bottle
is included).
B. Hand weight holder--These
included hand weights.

compartments hold the

C. Book holder--This holder allows you to read a good
book or enjoy your favorite magazine while you get
in shape.

L. Calories/Pulse display--This display shows the approximate number of calories you have burned.
When the optional chest pulse sensor is worn, the
display will also show your heart rate. The display
will alternate between one number and the other
.every seven seconds. If the optional handgdp pulse
sensor is used, the display will show your heart rate
continuously while your hands are on the pulse sensor.

D. Incline buttons--These buttons control the incline of
the treadmill. The incline range is 1.5% to 10%.
E. Speed buttons--These buttons control the speed of
the walking belt. The speed range is 0.5 mph to 10
mph.
F. Stop buttons--These buttons are used to stop the
walking belt. Note: Pressing either button will stop
the walking belt.
G. Start button--This
belt.

button is used to start the walking

H.. Waistband clip--This clip is designed to be worn on.
the waistband of your clothes, tf the key is pulled
from the console, the walking belt will automatically
stop.

M. Distance/Incline display--This display shows the
distance you have walked and the incline level of
the treadmill. The display will alternate between one
number and the other every seven seconds. Note:
Each time the Incllne buttons are pressed, the display wiII change to show the incline setting.
N. Speed display--This
the walking belt.

O. Enter button and _ and V buttonsqThese

key turns the console on and off.

J. Time/Segment Time display--When the manual
mode or an iFit.com program is selected, this display
will show the elapsed time. When a preset program
or a pulse program is selected, the display will show
both the time remaining in the program and the time
remaining in the current segment of the program.
The display will alternate between one number and
the other every seven seconds.
K. Cross Training indicator--During the Fitnesswalk
and Cardiojog programs, this indicator will periodically flash. The included hand weights can be used
while the indicator is flashing to add upper body
exercise to your workouts.

buttons

are used to enter your age when pulse programs
are used.
P,

I. Key--This

display shows the speed of

Select Workout button--This button is used to select
the manual mode, the four preset programs, the two
pulse programs, and iFit.com programs. Note: If the
walking belt is moving when the Select Workout
button is pressed, the walking belt will slow to a
stop and the displays will be reset.

Q. Mode indicators--These indicators show whether
the manual mode, a preset program, a pulse program, or an iFit.com program is selected.
R. Program profiles--These profiles show how the target heart rate will change during pulse programs
end how the speed and incline of the treadmill will
change during preset programs.
Note: The console can display exercise feedback
in either miles or kilometers (see SPEED DISPLAY
on page 11), For simplicity, all instructions in this
section refer to miles,

Insert the key into the console.
See HOW TO TURN ON THE POWER at the left.

Select the manual mode,
When the key is inserted, the manual
mode will be selected"
and the manual indicator will light. If a program has been selected, press the Select
Workout button repeatedly to select the manual
mode.

1_1 Press the Start button or the Speed zL button
to start the walking belt.
A moment after the button is pressed, the walking
belt will begin to move at 1.0 mph. Hold the handrails and begin walking.
As you exercise, adjust
the speed of the walking
belt as desired by pressing the Speed buttons.
Each time one of the
SPEED
J
buttons is pressed, the
speed will change by
0.1 mph. If one of the buttons is held down, the
speed will change in increments of 0.5 mph.
HOW TO TURN ON THE POWER

.Plug in the power cord (see HOW TO PLUG IN
THE POWER CORD on page 7).

Locate on
thethe
on/off
switch
front of
the treadmill near the
power cord. Make
sure that the on/oft
switch is in the on
position.

To stop the walking belt, press either of the Stop
buttons. The four displays will pause and the
_melSegment Time display will begin to flash. To
restart the walking belt, press the Start button or
the Speed Z_button. To stop the walking belt and
reset the displays, press a Stop button, remove
the key, and then reinsert the key.

Position

Stand
foot
rails of on
thethe
treadmill.
Find the clip attached
to the key and slide
the clip onto the
waistband of your
clothing. Next, insert
the key into the console. After a moment, the four
displays and various indicators will light.

_1] Adjust the incline of the treadmill.
To vary the intensity of
your exercise, adjust the
inctine of the treadmill
as desired with the
Incline buttons. Each
time one of the buttons

[I
Hfil:,°'::,.":E
u r:_]]/

is pressed, the incline
will change by 0.5%. The incline range is 1.5% to
10%. Note: After the buttons are pressed, it may
take a moment for the treadmill to reach the selected incline setting.

Speed display--This
display shows the speed
of the walking belt.

J_J Follow your progress with the four displays.
display--When the
manual mode or an

SPEED

iFit.com program is
-, "riME
Time/Segment'rime
ii
/85
,7!11
selected, this display
,= SEGMENTIIME
will show the elapsed
_
r.,_,..
time. When a preset
program or a pulse program is selected, the display
will show both the time remaining in the program
and the time remaining in the current segment of
the program. The display will alternate between
one number and the other every seven seconds.
Note: The Cross Training indicator below the display will periodically flash during the Fitnesswalk
and Cardiojog programs. While the indicator is
flashing, the included hand weights can be used for
upper body exercise as you walk on the treadmill.
Calodee/Pulse

Note
Thesee
nbe
i1 1

displayed in either miles
per hour (mph) or kilometers per hour (kph).
To see which unit of
measurement is selected, first hold down

one of the Stop buttons while inserting the key into
the console. The Speed display will show an =E"
-for English miles or an "M" for metric kilometers.
Press the Speed A button to change the unit of
measurement. When the desired unit of measurement is selected, remove and then reinsert the key.
When you are finished exercising, stop the
walking belt and remove the key.

display--This display
shows the approximate
number of calodes you
have burned. When the
l==

CALORIES

L-_

optional chest pulse
sensor is worn, the display will also show your heart rate. The display
will attemate between one number and the other
every seven seconds. If the optional handgdp
pulse sensor is used, the display will show your
heart rate continuously while your hands are on
the pulse sensor.
Distance/Incline

display--This display
shows the distance you
have walked and the
incline level of the
treadmill. The display
will alternate between
one number and the other every seven seconds.
Note: Each time the Incline buttons are pressed,
the display will change to show the incline setting.

Step onto the foot rails, press one of the Stop buttons, and adjust the incline of the treadmill to 1.5%.
The incline must be at 1.5% when the treadmill
is raised to the storage position or the treadmill
will be damaged. Next, remove the key from the
console and put it in a safe place. Note: If the displays and indicators on the console remain lit
after the key is removed, the console is in the
"demo" mode. Refer to page 20 and turn off the
demo mode.
When you are finished using the treadmill, move
the on/off switch near the power cord to the off
position and unplug the power cord.

The program will continue in this way until the
Time/Segment Time display counts down to zero.
The walking belt will then slow to a stop.
O

Insert the key into the console.

If the speed or incline setting for the current segment is too high or too low, you can manually
override the setting by pressing the Speed or
Incline buttons on the console. However, when
the next segment begins, the treadmill will automatically adjust to the speed and incline settings for the next segment.

See HOW TO TURN ON THE POWER on page 10.

Select one of the four preset programs.
When the key is
inserted, the
manual mode
will be selected
and the manual
=s
indicator will
light. To select
one of the preset programs,
press the Select
Workout button repeatedly until one of the four
preset program indicators lights.

To stop the program temporarily, press one of the
Stop buttons. AU displays will pause and the Time,'
Segment Time display will begin to flash. To
restart the program, press the Start button or the
Speed .'_button. To end the program, press a Stop
button, remove the key, and then reinsert the key.
L_

If you have selected the
Fitnesswalk or Cardlojog program, the Cross
Training Indicator in the
Time/Segment Time
display will periodically
flash. While the indicator

The profiles on the console show how the speed
and incline of the treadmill will change during the
preset programs--the white profiles show speed
settings and the green lines show incline settings.
The numbers at the left ends of the profiles show
the speed and incline ranges for the programs.
For example, during the Heatthwalk program, the
speed of the walking belt will be from 2 mph to 4
mph and the incline will be from 1.5% to 6%. The
Time/Segment Time display will show how long
the selected program will last.

Use the hand weights, if desired.

li ....
rl
m SEGMENT TIME

is flashing, use the included hand weights for upper
body exercise as you walk on the treadmill.
I_

Follow your progress with the four displays.
Refer to step 5 on page 11.

1_1 Press the Start button or the Speed/k button
to start the program.
A moment after the button is pressed, the treadmill will automatically adjust to the first speed and
incline settings for the program. Hold the handrails
and begin walking.
Each program is o'ivided into several time
segments of different
lengths. The Time/
== TIME
Segment Time disptay
_= SEGMENT TIME
will show both the time
remaining in the program and the time remaining in the current segment. One speed setting and one incline setting
are programmed for each segment. When only
three seconds remain in the first segment of the
program, a series of tones will sound and the
treadmill will automatically adjust to the speed and
incline settings for the second segment.

When the program has ended, remove the key.
Step onto the foot rails and make sure that the incline of the treadmill is at 1.5%. The incline must
be at 1.5% when the treadmill is raised to the
storage position. Next, remove the key from the
console and put it in a safe place. Note: if the disp/ays and indicators on the console remain lit
after the key is removed, the console is in the
"demo" mode. Refer to page 20 and turn off the
demo mode.
When you are finished using the treadmill, move
the on/off switch near the power cord to the off
position and unplug the power cord.

P:_....

P_ ,_

:_ _: :

:,'

•

Enter a maximum heart rate setting.
After you have

Note: The pulse programs can be used only when
the optional chest pulse sensor is worn. See page
20 for information about the chest pulse sensor.

entered
your
age, another
number will
begin toflashin
the CALORIES/

Insert the key into the console.

Put on the chest pulse sensor.
You must wear the chest pulse sensor in order to
use a pulse program. To put on the chest pulse
sensor, follow the instructions included with the
chest pulse sensor.

Select one of the two pulse programs.
When the key is

._J L_I

inserted, the
manual mode
will be selected
and the manual
indicator will

,===
_

Enter your age.
When a pulse
program is selected, an age
setting will begin
to flashinthe
CALORIES/
PULSE display.
If you have alraady entered your age, simply press
the Enter button. To enter your age, press the A
and _7buttons. The buttons can be held down to
enter your age quickly. When your age is shown,
press the Enter button.

I1L___.J

If you want to change the maximum heart rate setting, press the A and _7buttons. The buttons can
be held down to change the setting quickly. When
the desired setting is shown, press the Enter button.

light. To select
one of the pulse programs, press the Select
Workout button repeatedly until one of the two
pulse program indicators lights.
The profiles on the console show how the target
heart rate will change during the programs. The
Time/Segment Time display will show how long
the selected program will last.

_=,,=_,_._=_
L=_u

For example, if you are 30 years old, your maximum possible heart rate is 190 (220 minus 30
equals 190). Therefore, if Pulse program 1 is selected, the maximum heart rate setting can be from
123 to 161 (65% of 190 is 123; 85% of 190 is 161).

_,_
''"'_
,_
.-

_l ,,_ [_---i{_ ,r_.

PULSE display.
This number is the maximum heart rate setting for
the program. If Pulse program I is selected, the
maximum heart rate setting can be from 65% to
85% of your maximum possible heart rate (your
maximum possible heart rate is 220 minus your
age); if Pulse program 2 is selected, the maximum
heart rate setting can be from 65% to 80% of your
maximum possible heart rate. Note: Your maximum possible heart rate is an estimate only.

See HOW TO TURN ON THE POWER on page 10.

! /_

Press the Start button or the Speed A button
to start the program.
A moment after the button is pressed, the treadmill will automatically adjust to the first speed and
incline settings for the program. Hold the handrails
and begin walking.
Each program is divided
into several time segments of different
lengths. The Time/
Segment Time display
will show both the time
remaining in the program and the time remaining in the current seg:
merit. One target heart rate setting is programmed
for each segment. When only three seconds remain in the first segment of the program, a series
of tones will sound and the next segment will
begin. As you exercise, the speed and/or incline of
the treadmill will automatically change as needed
to keep your heart rate near the current target
heart rate setting.
The program will continue until the Time/Segment
Time display counts down to zero. The walking
belt will then slow to a stop.
13

If your heart rate is not detected during the program, the speed and incline of the treadmill may
automatically decrease until your heart rate is detected. If this happens, see the instructions included with the chest pulse sensor.

To stop the program temporarily, press one of the
Stop buttons. All displays will pause and the Time/
Segment Time display will begin to flash. To
restart the program, press the Start button or the
Speed ,'_button. To end the program, press a Stop
button, remove the key, and then reinsert the key.

the four displays.

Refer to step 5 on page 11.

B
If the speed or incline setting for the current segment is too high or too low, you can adjust the setting with the Speed or Incline buttons. However, if
you decrease the speed, the incline will automatically increase', if you increase the speed, the incline will decrease. If you increase the incline, the
speed will decrease; if you decrease the incline,
the speed will increase. The treadmill will always
attempt to keep your heart rate near the target
heart rate setting for the current segment. Note:
When the incline reaches the lowest setting, the
speed cannot be increased any further. When the
incline reaches the highest setting, the speed cannot be decreased any further.

Follow your progresswith

When the program has ended, remove the key.
Step onto the foot rails and make sure that the incline of the treadmill is at 1.5%. The incline must
be at 1.5% when the treadmill is raised to the
storage position. Next, remove the key from the
console and put it in a safe place. Note: If the displays and indicators on the console remain lit
after the key is removed, the console is in the
"demo" mode. Refer to page 20 and turn off the
demo mode.
When you are finished using the treadmill, move
the on/off switch near the power cord to the off
position and unplug the power cord.

HOW TO CONNECT YOUR PORTABLE STEREO

To use iFit.com CD's, the treadmill must be connected to your portable CD player, portable stereo,
home stereo, or computer with CD player. See pages
15 and 16 for connecting instructions. To use IFit.com
videocassettes, the treadmill must be connected to
your VCR. See page 17 for connecting instructions.To
use iFit.com programs directly from our intemet
site, the treadmill must be connected to your home
computer. See page 16 for connecting instructions.

Note: If your stereo has an RCA-type AUDIO OUT
jack, see instruction A below. If your stereo has a
3.Smm LINE OUT jack, see instruction B. if your
stereo has only a PHONES jack, see instruction C.
A. Plug one end of the audio cable into the jack on the
front of the treadmill near the power cord. Plug the
other end of the cable into the included adapter. Plug
the adapter into an AUDIO OUT jack on your stereo.
A

HOW TO CONNECT YOUR PORTABLE CD PLAYER
Note: If your CD player has separate LINE OUT and
PHONES jacks, see Instruction A below. If your CD
player has only one jack, see instruction B.

i[]®i Audio
Adapter
t ................

•

.__

Cable

A. Plug one end of the audio cable into the jack on the
front of the treadmill near the power cord. Plug the
other end of the cable into the LINE OUT jack on
your CD player. Plug your headphones intothe
PHONES jack.
A

_..=_ .............

B. Plug one end of the audio cable into the jack on the
front of the treadmill near the power cord. Plug the
other end of the cable into the LINE OUT jack on
your stereo.
B

"'_'_'i
i_

Audo

Cable

Head-

phones
h

i i-D--']('_i

Audio

!
B. Plug one end of the audio cable into the jack on the
front of the treadmill near the power cord. Plug the
other end of the cable into a 3.5ram Y-adapter
(available at electronics stores). Plug the Y-adapter
into the PHONES jack on your CD player. Plug your
headphones into the other side of the Y-adapter.
B
i m.@i
Ir

Cab,e

C. Plug one end of the audio cable into the jack on the
front of the treadmill near the power cord. Plug the
other end of the cable into a 3.5mm Y-adapter
(available at electronics stores). Plug the Y-adapter
into the PHONES jack on your stereo. Plug your
headphones into the other side of the Y-adapter.
C

.:.................:
_O-_!
i_
i

Audio
Cable

3.5mm
Y-adapter.S]
1
................".:
:1"_ _
:

Headphones

.
Audio
_.,
L,aole

3.5mm _}
Y-adapter

Headphones

HOW TO CONNECT YOUR HOME STEREO

HOW TO CONNECT YOUR COMPUTER

Note: If your stereo has an unused LINE OUT jack,
see instruction A below. If the LINE OUT jack is
being used, see instruction B.

Note: If your computer has a 3.Smm LINE OUT jack,
see instruction A. If your computer has only a
PHONES jack, see instruction B.

A. Plug one end of the audio cable into the jack on the
front of the treadmill near the power cord. Plug the
other end of the cable into the included adapter.
Plug the adapter into the LINE OUT jack on your
stereo.

A. Plug one end of the audio cable into the jack on the
front of the treadmill near the power cord. Plug the
other end of the cable into the LINE OUT jack on
your computer.
A

i_"_:_i
! " _

Audio
Cable

Audio

J "_'i

Cable

",--:-------'
_

Adapter--_

• .'---"-:'-"-":-"
- -.==E_=.=-_,

8. Plug one end of the audio cable into the jack on the
front of the treadmill near the power cord. Plug the
other end of the cat01einto the included adapter.
Plug the adapter into an RCA adapter (available at
electronics stores). Next, remove the wire that is
currently plugged into the LINE OUT jack on your
stereo and plug the wire into the unused side of the
RCA adapter. Plug the RCA adapter into the LINE
OUT jack on your stereo_

B. Plug one end of the audio cable into the jack on the
front of the treadmill near the power cord. Plug the
other end of the cable into a 3.5mm Y-adapter
(available at electronics stores). Plug the Y-adapter
into the PHONES jack on your computer. Plug your
headphones or speakers into the other side of the
Y-adapter.

...

............

i@@i A "o _
@ [_

___...j
...
................-:
t_[}

i _ I-_--] i

RCA .__
Audio
Cable

Adapter'_y
Adapter

Wire removed from ----->-c::_ -_
LINE OUT jack

uable

-----"
Y-adapter

Headphones/Speakers

_>.c3c_J

HOW TO CONNECT

YOUR VCR

Note: If your VCR has an unused AUDIO OUT jack,
see instruction
A below. If the AUDIO OUT jack is
being used, see instruction B, If you have a TV
with a built-in VCR, see instruction B. if your VCR
is connected to your home stereo, see HOW TO
CONNECT YOUR HOME STEREO on page 16.
A. Plug one end of the audio cable into the jack on the
front of the treadmill near the power cord. Plug the
other end of the cable into the included adapter.
Plug the adapter into the AUDIO OUT jack on your
VCR.

To use iFit.com CD's or videocassettes, the treadmill
must be connected to your portable CD player, portable
stereo, home stereo, computer with CD player, or
VCR. See HOW TO CONNECT THE TREADMILL TO
YOUR CD PLAYER, VCR, OR COMPUTER on page
15. Note: To purchase iFit.com CD's or iFit.com
videocassettes, call toll-free 1-800735-O768.
Follow the steps below to use an iFit.com CD or video
program.

A
_1

See HOW TO TURN ON THE POWER on page 10.

r .....

i.=
h

zi:

Audio

i@_i

_Jable

("6") i

Adapter

cassettes, press the
Select Workout button repeatedly until the iFit.com
indicator lights.

f,::: :-:...,
........
! ,
.

;.........._z"_
i [_-"1(O) i

Audio

RCA Adapter-_

! @ I-_i

Cable

Adapter

Insert the iFit.com CD or videocassette.
If you are using an iFit.com CD, insert the CD into
your CD player. If you are using an iFit.com videocassette, insert the videocassette into your VCR.

Select the IFit.com mode.
When the key is inserted, the manual
mode will be selected
and the manual indicator will light. To use
iFit.com CD's or video-

B. Plug one end of the audio cable into the jack on the
front of the treadmill near the power cord. Plug the
. other end of the cable into the included adapter.
Plug the adapter into an RCA adapter (available at
electronics stores). Next, remove the wire that is
currently plugged into the AUDIO OUT jack on your
VCR and plug the wire into the unused side of the
RCA adapter. Plug the RCA adapter into the AUDIO
OUT jack on your VCR.

Insert the key into the console.

Press the PLAY button on your CD player or
VCR.
A moment after the button is pressed, your personal trainer will begin guiding you through your
workout. Simply follow your personal trainer's
instructions. Note: If the Time/Segment Time display is flashing, press the Start button or the
Speed A button on the console. The treadmill will
not respond to a CD or video program when the
Time/Segment Time display is flashing.

AUDIO OUT jack

During the CD or video program, an electronic
"chirping" sound will alert you when the speed
and/or incline of the treadmill is about to change.
CAUTION: Always listen for the "chirp" and be
prepared for speed and/or incline changes. In
some instances, the speed and/or incline may
change before the personal trainer describes
the change.
17

If the speed or incline settings are too high or too
low, you can manually override the settings at any
time by pressing the Speed or Incline buttons on
the console. However, when the next "chirp" is
heard, the speed and/or incline will change to
the next settings of the CD or video program.
To stop the walking belt at any time, press a Stop
button on the console. The Time/Segment Time
display will begin to flash. To restart the program,
press the Start button. After a moment, the walking belt will begin to move at 1.0 mph. When the
next "chirp" is heard, the speed and incline
will change to the next settings of the CD or
video program. The program can also be
stopped by pressing the Stop button on your CD
player or VCR.
When the CD or video program is completed, the
walking belt will stop and the Time/Segment Time
display will begin to flash. Note: To use another
CD or video program, press a Stop button or remove the key and go to step I on page 17.
Note: If the speed or incline of the treadmill
does not change when a "chirp" is heard:
• make sure that the IFit.com indicator is lit and
that the Time/Segment Time display is not
flashing. If the Time/Segment Time display is
flashing, press the Start button or the Speed
A button on the console
• adjust the volume of your CD player or VCR. If
the volume is too high or too low, the console
may not detect the program signals
• make sure that the audio cable is properly
connected, that it is fully plugged in, and that
it is not wrapped around a power cord
• if you are using your portable CD player and
the CD skips, set the CD player on the floor or
another flat surface instead of on Me console.

[]Follow

your progress with the four displays.

See step 5 on page 11.

r_When
key.

the program is completed, remove the

Step onto the foot rails and make sure that the incline of the treadmill is at 1.5%. The incline must
be at 1.5% when the treadmill is raised to the
storage position. Next, remove the key from the
console and put it in a safe place. Note: If the displays and indicators on the console remain lit
after the key is removed, the console is in the
"demo" mode. Refer to page 20 and turn off the
demo mode.
When you are finished using the treadmill, move
the on/off switch near the power cord to the off
position and unplug the power cord.

HLI rai s. F ndlhe cl p attached to the key and ahde
I_ Return to the treadmill and stand on the foot =.
the key onto the waistband of your clothing.
Our new intemet site at www.iFit.com allows you to
access a selection of programs that interactively control your treadmill to help you achieve your specific exercise goals. In addition, you can play iFit.com audio
and video programs directly from the intemet. By
adding an optional upgrade module to the console, you
can use virtually endless features on our intemet site.
Explore www.iFit.com for details. To purchase an up
grade module, call toll-free 1-800-735-0768.
To use programs from our intemet site, the treadmill
must be connected to your home computer. See HOW
TO CONNECT YOUR COMPUTER on page 16. In
addition, you must have an intemet connection and
an intemet service provider. A list of specific system
requirements will be found on our intemet site.
Follow the steps below to use a program from our
intemet site.

Insert the key into the console.
See HOW TO.TURN ON THE POWER on page 10.

When the on-screen countdown ends, the program
will begin and the walking belt will begin to move.
Hold the handrails, step onto the walking belt, and
begin walking.
During the program, an electronic "chirping" sound
will alert you when the speed and/or incline of the
treadmill is about to change. CAUTION: Always
listen for the "chirp" and be prepared for speed
and/or incline changes.
If the speed or incline settings are too high or too
low, you can manually override the settings at any
time by pressing the Speed or Incline buttons on
the console. However, when the next "chirp" is
heard, the speed and/or incline will change to
the next settings of the program.
To stop the walking belt at any time, press a Stop
button on the console. The Time/Segment Time
display will begin to flash. To restart the program,
press the Start button. After a moment, the walking belt will begin to move at 1.0 mph. When the
next "chirp" is heard, the speed and incline will
change to the next settings of the program.

Select the iFit.com mode.
When the key is inserted, the manual
mode will be selected
and the manual indicator will light. To use a
program from our internet site, press the
Program Select button repeatedly until the
iFit.com indicator lights.

]Go connection.
to your computer and start an internet

When the program is completed, the walking belt
will stop and the Time/Segment Time display will
begin to flash. Note: To use another program,
press a Stop button and go to step 5.
Note: If the speed or incline of the treadmill
does not change when a "chirp" is heard, make
sure that the IFit.com Indicator is lit and that
the Time/Segment Time display is not flashing.
In addition, make sure that the audio cable is
properly connected, that it is fully plugged in,
and that it is not wrapped around a power cord.

[]Follow
B

Start
your web
if necessary, and go to
our internet
sitebrowser,
at www.iFit.com.

[]Follow
the desired links on our Internet site to
select a program.
Read and follow the on-line instructions for using a
program.

Follow the on-line instructions
program.

to start the

When you start the program, an on-screen countdown will begin.

your progress with the four displays.

See step 5 on page 11.

[]When

the program has ended, remove the key.

Step onto the foot rails and make sure that the incline of the treadmill is at 1.5%. Remove the key
from the console and put it in a safe place. Note: If
the displays and indicators on the console remain lit after the key is removed, the console is
in the "demo" mode. Refer to page 20 and turn
off the demo mode.
Next, move the on/off switch near the power cord
to the off position and unplug the power cord.

THE INFORMATION

MODE/DEMO

THE OPTIONALCHESTPULSESENSOR

MODE

The console features an information mode that keeps
track of the total number of hours that the treadmill has
been operated and the total number of miles that the
walking belt has moved. The information mode also allows you to switch the console from miles per hour to
kilometers per hour. In addition, the information mode
allows you to turn on and turn off the demo mode.

An optional chest pulse sensor adds even more
features to the console. The chest pulse sensor continuously monitors your heart rate during your workouts
and allows you to use the console's two pulse programs. To purchase the optional chest pulse sensor, call the toil-free telephone number listed on
the back cover of this manual.

To select the information mode, hold down one of the
Stop buttons while inserting the key into the console.
When the information mode is selected, the following
information will be shown:
The Time/Segment Time
display will show the total
number of hours that the
treadmill has been used.

The Distance/Incline display
will show the total number of
miles that the walking belt
has moved.

I(=

TIME

I-! I-I j

/F:ln

I:0=::o
!

An "E," for English miles, or
an "M," for metric kilometers,
will appear in the Speed display. Press the Speed A
button to change the unit of
measurement.
IMPORTANT: The
Calories/Pulse display
should be blank. If a "d"
appears in the display, the
console is in the "demo"
mode. This mode is intended to be used only
when a treadmill is displayed in a store. When the console is in the demo mode, the power cord can be
plugged in, the key can be removed from the console,
and the displays and indicators on the console will automatically light in a preset sequence, although the butIons on the console will not operate. If a "d" appears
in the Calories/Pulse
display when the information
mode is selected, press the Speed _7button so the
Calories/Pulse display is blank.
To exit the information mode, remove the key from the
console.

2,O

THE OPTIONAL

HANDGRIP

An optional handgrip pulse sensor
allows you to conveniently measure
your heart rate before you begin exercising, during
your workout, and
after you finish. To
purchase the optional handgrip
pulse sensor, call
the toll-free telephone
covet of this manual.

PULSE SENSOR

number listed on the back

Note: The console's pulse programs can be used
only with the optional chest pulse sensor.

HOW TO FOLD AND MOVE THE TREADMILL
HOW TO FOLD THE TREADMILL

FOR STORAGE

Before folding the treadmill, adjust the incline to the
lowest position. If this is not done, the treadmill may be
permanently damaged. Next, unplug the power cord.
Caution: You must be able to safely lift 45 pounds (20
kg) in order to raise, lower, or move the treadmill.
1. Hold the treadmill in the locations shown at the dght. To
decrease the possibility of injury, bend your legs and
keep your back straight. As you raise the treadmill,
make sure to lift with your legs rather than your back.
Raise the treadmill about halfway to the vertical position.
2. Move your right hand to the position shown and hold the
treadmill firmly. Using your left hand, pull the lock knob to
the left and hold it. Raise the treadmill until all parts of the
treadmill are past the latch pin. Release the lock knob.
Make sure that the lock knob is fully released so the
latch pin is securely holding the catch.
To protect the floor or carpet from damage, place a
mat under the treadmill. Keep the treadmill out of
direct sunlight. Do not leave the treadmill in the storage position in temperatures above 85 ° Fahrenheit.
HOW TO MOVE THE TREADMILL
Before moving the treadmill, convert the treadmill to the
storage position as described above. Make sure that the
latch pin Is securely holding the catch.
1. Hold the handrails and place one foot on the base.
2. Tilt the treadmill back until it rolls freely on the wheels.
Carefully move the treadmill to the desired location. To reduce the risk of injury, use extreme caution while
moving the treadmill. Do not attempt to move the
treadmill over an uneven surface.
3. Place one foot on the base, and carefully lower the treadmill until it is resting in the storage position.

HOW TO LOWER THE TREADMILL

FOR USE

1. Hold the treadmill with your right hand as shown. Using
your left hand, pull the lock knob to the left and hold it.
Pivot the treadmill down until all parts of the treadmill are
past the pin. Slowly release the lock knob.
2. See the drawing at the top of this page. Hold the treadmill firmly with both hands, and lower the treadmill to the
floor. To decrease the possibility of injury, bend your
legs and keep your back straight.

ocIf

•Knob_" _

TROUBLE-SHOOTING

AND MAINTENANCE

•

Most treadmill problems can be solved by following the instructions below. If further assistance is
needed, please call our toll-free HELPLINE at 1-800-736-6879, Monday through Saturday, 7 a.m. until 7
p.m. Central Time (excluding holidays).
PROBLEM

SOLUTION

1. The power does not
turn on

a. Make sure that the power cord is plugged into a surge suppressor, and that the
surge suppressor is plugged into a properly grounded outlet (see page 7). Use
only a single-outlet surge suppressor that is UL 1449 listed as a transient voltage
surge suppressor (TVSS). The surge suppressor must have a UL suppressed
voltage rating of 400 volts or less and a minimum surge dissipation of 450 joules.
The surge suppressor must be electdcally rated for 120 volts AC and 15 amps.
b. Make sure that the key is fully inserted into the console.
c. Check the circuit breaker located on the frame near
the power cord. If the switch protrudes as shown, the
circuit breaker has tripped. To reset the circuit
breaker, wait for five minutes and then press the
switch back in.

d. Check the on/off switch located on the frame near
the power cord. The switch must be in the on position.

2. The power turns off
during use

Tripped

Reset

ony I

Position

a. Check the circuit breaker located on the treadmill frame near the power cord (see
1. c. above). If the circuit breaker has tripped, wait for five minutes and then press
the switch back In.
b. Make sure that the power cord is plugged in.
c. Remove the key from the console and then reinsert it.
d. Make sure that the on/off switch is in the on position (see 1. d. above).

3. The walking belt
slows when walked
on

Make sure that only an appropriate surge suppressor is used (see 1. a. above).

b. If the walking belt is overtightened, treadmill performance may decrease and the
walking belt may be permanently dam3-4"
aged. Remove the key and UNPLUG THE
POWER CORD. Using the included allen
wrench, turn both rear roller adjustment
bolts counterclockwise 1/4 of a turn. When
the walking belt is properly tightened, you
should be able to lift the edges of the
Rear Roller Adjustment Boils
walking belt 3 to 4 inches off the walking
platform. Be careful to keep the walking
belt centered. Plug in the power cord, insert the key and run the treadmill for a few
minutes. Repeat until the warking belt is properly tightened.

PROBLEM
4. The walking belt is
off-center or slips
when walked on

SOLUTION
a.

5. The displays of the
console do not function properly

If the walking belt has shifted to the
left, first remove the key end UNPLUG
THE POWER CORD. Using the allen
wrench, turn the left rear roller adjustment
bolt clockwise, and the right bolt counterclockwise, 1/4 of a turn each. Be careful
not to overtighten the walking belt. Plug in
the power cord, insert the key and run the
treadmill for a few minutes. Repeat until the walking belt is centered.
If the walking belt has shifted 'to the
right, first remove the key end UNPLUG
THE POWER CORD. Using the allen
wrench, turn the left rear roller adjustment
bolt counterclockwise, and the right bolt
clockwise, 1/4 of a turn each. Be careful
not to overtighten the walking belt. Plug in
the power cord, insert the key and run the
treadmill for a few minutes. Repeat until the walking belt is centered.
If the walking belt slips when walked
on, first remove the key and UNPLUG
THE POWER CORD. Using the allen
wrench, turn both rear roller adjustment
bolts clockwise, 1/4 of a turn. When the
walking belt is correctly tightened, you
should be able to lift the edges of the
walking belt 3 to 4 inches off the walking
platform. Be careful to keep the walking belt centered. Plug in the power cord, insert the key and run the treadmill for a few minutes. Repeat until the walking belt
is propedy tightened.

Remove the key from the console and UNPLUG THE POWER CORD. Next, remove
1/8"
-+-=
the screws from the hood and carefully re2"-"
move the hood. Locate the Reed Switch
26 ./
(26) and the Magnet (85) on the left side of
the Pulley (28). Tum the Pulley until the
Top
-Magnet is aligned with the Reed Switch.
View
Make sure that the gap between the
Magnet and the Reed Switch is about
118". If necessary, loosen the Reed Switch
Screw (2) and move the Reed Switch slightly. Retighten the Screw. Re-attach the
hood, and run the treadmill for a few minutes to check for a correct speed reading.

CONDITIONING

GUIDELINES
During the first few minutes of exercise, your body
USeReasily accessible carbohydrate calories for energy. Only after the first few minutes does your body
begin to use stored fat ca/ones for energy. If your goal
is to bum fat, adjust the speed and incline of the treadmill until your heart rate.is near the lowest number in
your training zone.

The following guidelines will help you to plan your exercise program. For more detailed exercise information, obtain a reputable book or consult your physician.

For maximum fat burning, adjust the speed and incline
of the treadmill until your heart rate is near the middle
number in your training zone.
Aerobic Exercise

EXERCISE INTENSITY
Whether your goal is to burn fat or to strengthen your
cardiovascular system, the key to achieving the
desired results is to exercise with the proper intensity.
The proper intensity level can be found by using your
heart rate as a guide. The chart below shows recommended heart rates for fat burning and aerobic exercise.

If your goal is to strengthen your cardiovascular system, your exercise must be "aerobic." Aerobic exercise
is activity that requires large amounts of oxygen for
prolonged periods of time. This increases the demand
on the heart to pump blood to the muscles, and on the
lungs to oxygenate the blood. For aerobic exercise,
adjust the speed and incline of the treadmill until your
heart rate is near the highest number in your training
zone.
WORKOUT

GUIDELINES

Each workout should include the following three pads:

To find the proper heart rate for you, first find your age
near the bottom of the chart (ages are rounded off to
the nearest ten years). Next, find the three numbers,
above your age. The three numbers define your "training zone." The lower two numbers are recommended.
heart rates for fat burning; the higher number is the
recommended heart rate for aerobic exercise.
HOWTO MEASURE
YOUR HEART RATE
To measure your heart
rate, stop exercising and
place two fingers on
your wrist as shown.
Take a six-second
heartbeat count, and
multiply the result by ten to find your heart rate. (A sixsecond count is used because your heart rate drops
quickly when you stop exercising.) If your heart rate is
too high or too low, adjust the speed or incline of the
treadmill
Fat Burning

To burn fat effectively, you must exercise at a relatively
low intensity level for a sustained period of time.

A Warm-up-Start
each workout with 5 to 10 minutes
of stretching and light exercise. A proper warm-up increases your body temperature, heart rate and circulation in preparation for exercise.
Training Zone Exercise---After warming up, Increase
the intensity of your exercise until your pulse is in your
training zone for 20 to 60 minutes. (During the first few
weeks of your exercise program, do not keep your
pulse in your training zone for longer than 20 minutes.)
Breathe regulady and deeply as you exercise--never
hold your breath.
A Cool-down--Finish

each workout with 5 to 10 min-

utes of stretching to cool down, This will increase the
flexibility of your muscles and will help prevent post-exercise problems.
Exercise Frequency
To maintain or improve your condition, complete three
workouts each week, with at least one day of rest between workouts. After a few months, you may complete up to five workouts each week if desired.
The key to success is to make exercise a regular and
enjoyable part of your everyday life.

SUGGESTED STRETCHES
The correct form for several basic stretches is shown at the right. Move slowly as you stretch---never bounce.
1. Toe Touch Stretch
Stand with your knees bent slightly and slowly bend forward from
your hips. Allow your back and shoulders to relax as you reach
down toward your toes as far as possible. Hold for 15 counts,
then relax. Repeat 3 times. Stretches: Hamstrings, back of knees
and back.
2. Hamstring Stretch
Sit with one leg extended. Bring the sole of the opposite foot toward you and rest it against the inner thigh of your extended leg.
Reach toward your toes as far as possible. Hold for 15 counts,
then relax. Repeat 3 times for each leg. Stretches: Hamstrings,
lower back and groin.

3. Calf/Achilles Stretch
With one leg in front of the other, reach forward and place your
hands against a wall. Keep your back leg straight and your back
foot flat on the floor. Bend your front leg, lean forward and move
your hips toward the wall. Hold for 15 counts, then relax. Repeat
3 times for each leg. To cause further stretching of the achilles
tendons, bend your back leg as well. Stretches: Calves, achilles
tendons and ankles.

3
4

4. Quadriceps Stretch
With one hand against a wall for balance, reach back and grasp
one foot with your other hand. Bring your heel as close to your
buttocks as possible. Hold for 15 counts, then relax. Repeat 3
times for each leg. Stretches: Quadriceps and hip muscles.
5. Inner Thigh Stretch
Sit with the soles of your feet together and your knees outward.
Pull your feet toward your groin area as faras possible. Hold for
15 counts, then relax. Repeat 3 times. Stretches: Quaddceps
and hip muscles.

PART LISTmModel

No. 831.299300

ROIOOA

To locate the parts listed below, refer to the EXPLOOED DRAWING attached in the center of this manual.
Key
No.

Qty.

Key
No.

Qty.

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27

1
11
6
9
1
2
4
4
2
2
1
2
2
2
1
1
1
1
2
11
4
2
1
1
1
1
1

Motor Hood
Hood Screw
Platform Screw
Platform Washer
Latch Catch
Latch Catch Screw
Isolator
Belt Guide Screw
Belt Guide
Frame Pivot Bolt
Front Roller/Pulley
Incline Motor Spacer
Incline Motor Bolt
Incline Motor Nut
Incline Motor
Front Roller Adj. Nut
Pulse Mounting Plate
Front Roller Adj. Bolt
Side Hood Tab
Hood Tab Screw
Hood Tab Clip
Front Hood Tab
Reed Switch Clip
Motor
2-lb. Hand Weight
Reed Switch
Motor Belt

51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77

1
2
2
2
2
1
1
2
2
1
1
1
2
2
2
2
1
1
1
1
1
1
1
3
1
8
1

Frame
Rear Wheel
Rear Wheel Bolt
Rear Roller Guard
Rear Wheel Nut
Rear Roller
Right Endcap
Rear.Roller Adj. Washer
Rear Roller Adj.Bolt
Left Endcap
Allen Wrench
Walking Platform
Handrail Grip
Handrail Grip Screw
Crossbar Bolt
Crossbar Washer
Lock Knob
Lock Knob Sleeve
Lock Spring
Lock Knob Collar
Pin Clip
Lock Pin
Crossbar
Console Base Screw
Console Base Cover
Cover Screw
Pulse Sensor Cover

28
29
30
31
32
33

1
1
2
1
1
1

Pulley/Flywheel/Fan
Motor Tension Bolt
Motor Tension Washer
Motor Star Washer
Motor Tension Nut
Motor Pivot Bolt

78
79
80
81
82
83

2
1
1
1
2
1

Sensor Cover Screw
Key/Clip
Console Base
Book Holder Lens
Console
Lift Frame

34"
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50

1
16
1
1
1
1
1
1
1
1
t
4
1
1
1
1
1

Motor/Pulley/Flywheel/Fan
Screw
Choke
Choke Plate
Circuit Breaker
On/Off Switch
Power Cord
Power Cord Grommet
Outlet Bracket
Controlter
Power Supply
Ptastic Stand-off
Electronics Bracket
Belly Pan
Upright Wire Harness
Right Foot Grip
Watking Bert

84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100

1
1
1
1
1
1
1
2
2
5
5
1
2
3
2
2
2

Releasable Tie
Magnet
Cable Tie
8" Power Wire
8" Cable Tie
Jack
10' IFit.com Wire
Li_tFrame Bolt
Plastic Washer
Utt Frame Nut/Wheel Nut
Base Pad
Left Foot Grip
Upright Base Cap
Warning Deca_
Wheel Bolt
Base Wheel
Wheer Insert

Description

Key
No.

Qty.

101

12" Audio Wire

102
103
104

1
1
1

Large Warning Decal
Upright Base
Shock

105
106
#
#
#
#
#
#

2
2
1
1
1
1
1
1

Lift Frame Spacer
Endcap Spacer
8" Wire Harness
8' Green Wire, 2 Ring
4" Green Wire, F/Ring
4" Black Wire, 2 Female
8" Black Wire, 2 Ring
8" Black Wire, M/F

Description

Key
No.

Qty.

#
#
#
#
#
#

1
1
1
1
1
1

Deeodptlon
8" Blue Wire, 2 F
20" Blue Wire, 2 F
4" Blue Wire, 2 F
8" White Wire, 2 Female
20" White Wire, M/F
User's Manual

*Includes all parts shown in the box.
#These parts are not illustrated
Specifications are subject to change without notice.

EXPLODED DRAWING--Model

No. 831.299300

R01OOA

30
37

21
13
•
.-" 14-_

50
49

3
4

REMOVE AND SAVE THIS EXPLODED
FOR FUTURE REFERENCE.

DRAWING

To identify the parts shown on this exploded drawing, refer to the PART LIST on pages 26 and 27
of the USER'S MANUAL.

EXPLODED

DRAWING--Model

No. 831.299300

Roloo_,_
_-

/
/
/
/
64

79
76
63

93
93

98
/
)

,t_76
_184
92

88
91

99
100
94
20

_--86

The model number and serial number of your HealthRide#'SOFTSTRIDER S300F Mtreadmill are listed on a decal attached to the
frame. See the front cover of this manual to find the location of the
decal

Model No. 831.299300

QUESTIONS?
If you find that:
• you need t_elp assembling or
operating the HealthRider
SOFTSTRIDER S300i treadmill
• a part is missing

All replacement parts are available for immediate purchase or
special order when you visit your nearest SEARS Service Center•
To request service or to order parts by telephone, call the toll-free
numbers listed at the left.
When requesting help or service, or ordering parts, please be
prepared to provide the following information:

• or you need to schedule repair
service

• The NAME OF THE PRODUCT (HealthRide_SOFTSTRIDER
S300i TM treadmill)

call our toll-free HELPLINE

• The MODEL NUMBER OFTHE

1-800-736-6879
Monday-Saturday,
7 am-7 pm
Central Time (excluding holidays)

PRODUCT (831.299300)

• The KEY NUMBER AND DESCRIPTION OF THE PART (see the
PART LIST on pages 26 and 27 and the EXPLODED DRAWING
attached in the center of this manual)

REPLACEMENT
PARTS
if parts become worn and need
to be replaced, call the following
toll-free number

1-800-FON-PART
(1-800-366-7278)

FULL 90 DAY WARRANTY
s

For 90 days from the date of purchase, if failure occurs due to defect in material or workmanship in this
SEARS TREADMILL EXERCISER, contact the nearest SEARS Service Center throughout the United
States and SEARS will repair or replace the TRE,_DMILL EXERCISER, free of charge.
This warranty does not apply when the TREADMILL
poses•

EXERCISER is used commercially or for rental pup
_

This warranty gives you specific legal rights, and you may also have other fights which vary tromstate
to state.
SEARS, ROEBUCK AND CO., DEPT. 817WA, HOFFMAN

Pad _Ho. 155212 R0100A

ESTATES, IL 60179

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : No
Page Count                      : 30
Page Layout                     : SinglePage
Page Mode                       : UseNone
Producer                        : Goby Monitor Application version 3, 2, 1, 4
Create Date                     : Mon Apr 02 12:12:12 2007
Author                          : 
Title                           : 
Subject                         :

EXIF Metadata provided by EXIF.tools

Healthrider 831299300 User Manual S300I Manuals And Guides L0020035

HEALTH RIDER Treadmill Manual L0020035 HEALTH RIDER Treadmill Owner's Manual, HEALTH RIDER Treadmill installation guides

Navigation menu

Versions of this User Manual:

Views

Navigation