HeathCo 67WDB00TX Wireless Recessed transmitter User Manual

Download:
Mirror Download [FCC.gov]
Document ID	951560
Application ID	GZJlQ0kuWW3CnUlAnpQ+QQ==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	6.59kB (82419 bits)
Date Submitted	2008-06-04 00:00:00
Date Available	2008-06-04 00:00:00
Creation Date	2008-05-30 17:59:35
Producing Software	Acrobat Distiller 6.0 (Windows)
Document Lastmod	2008-05-30 18:00:12
Document Title	User Manual.pdf
Document Creator	PScript5.dll Version 5.2.2
Document Author:	jessica.jiang

Wireless Push
Button Insert
(Style may vary from illustration)
The Heath®/Zenith Wireless Push Button Insert
works with any Heath®/Zenith wireless chime.
• Patented Technology
• Battery powered push button - No wires to
run.
• 128 selectable codes allow more than one
chime system in the same house.
• Factory installed batteries.
• LED halo lighted push button (see Halo Lighted
Push Button Feature for more information).
• Fits any mounting plate with a 5/8" diameter
opening.
• Works with stucco or aluminum siding.
© 2008 HeathCo LLC
598-1312-00
WARNING: To prevent possible SERIOUS INJURY
or DEATH:
• NEVER allow small children near batteries.
• If battery is swallowed, immediately notify doctor.
Pull tab to
activate battery
FT
1. Open battery cover. To open battery, press in tab on back
of push button and lift cover (see Figure 1). Pull battery tab
to activate factory installed battery (see Figure 2). Note: See
Troubleshooting for replacement battery information.
2. Test range. Temporarily position push button where you
want it mounted. Press push button to verify chime and
push button work properly. If chime does not sound, see
Troubleshooting.
Dip Switches
Figure 1
Figure 2
-2-
598-1312-00
O
3. Mount push button. Note: Use a standard 5/8" drill bit. Do
not use a spade-type bit.
• Use masking tape to mark 3 1/2" depth on drill bit (see
Figure 3).
• Drill 5/8" diameter hole 3 1/2" deep in desired mounting
location.
• Fully insert push button into mounting hole. Insert push
button into mounting hole (see Figure 4).
• Attach mounting plate to wall with screws included with
plate (see Figure 5).
FT
Masking Tape
3 1/2" (89 mm)
Figure 3
5/8" Hole Drilled 3 1/2" Deep
Figure 5
Push Button
Mounting Plate
Push Button Insert
Figure 4
598-1312-00
-3-
Tune Settings
FT
Your wireless chime has different selectable tunes: Ding (one
note), Ding-Dong (two note), or Westminster (eight note) (Available on selected chimes). The factory setting is for the Ding-Dong
tune (or Westminster, when available). This tune can be changed
by following the instructions below.
• Ding (one note tune)
Inside Push Button: Location 8, set dip switch ON (1 or High)
or add jumper.
• Ding-Dong (two note tune)
Inside Push Button: Location 8, set dip switch OFF (0 or
Low) or remove jumper.
Chime: Remove jumper from location 8.
• Westminster (Eight note tune) (Available on selected
chimes)
Inside Push Button: Location 8, set dip switch OFF (0 or
Low) or remove jumper.
Chime: Add a jumper to location 8.
Note: All models have both front and back door tune capabilities.
We recommend the back door use the Ding tune and the front
door use the Ding-Dong tune (or Westminster tune, available
on selected chimes).
ON
Tune Setting (Not
used on all models)
12345678
Tune Setting
Chime
Inside Push Button
Figure 6
Note: Some models might require the use of tweezers to remove and
replace the jumpers.
598-1312-00
-4-
Troubleshooting
FT
A. Chime does not sound:
• Make sure push button and chime codes are the same
(see Figure 7).
• Check orientation of push button battery (See diagram
inside push button for correct battery orientation.)
• Check charge of push button and chime batteries (if applicable), replace if necessary. Note: The push button uses
a “N” type battery.
B. Chime sounds when not intended (false triggers): Chime
is receiving interference from another wireless device;
change the code setting (see Code Setting below).
C. Batteries seem OK, but the chime does not work when
installed:
• Do not mount chime or push button on metal or near
metal studs. This reduces the transmitter range. Use
1/4" to 1/2" (6 to 13 mm) wood shims to move chime or
push button off metal surface.
• Concrete floors may reduce range. Move chime away
from floor.
• Try locating chime closer to push button.
D. Code Setting:
It is recommended to only change one code position at a time
and then check to see if system is functioning properly.
1. Open the cases and locate the dip switches or jumpers on
both the push button and chime (see Figure 7).
2. The push button and chime both have eight different dip
switch or jumper locations. Positions 1 through 7 are used
for setting the code.
Continued
598-1312-00
-5-
D
1234 567 8
FT
3. To change the code, either:
• Add a jumper to the chime and set the matching push
button dip switch to ON or...
• Remove a jumper from the chime and set the matching
push button dip switch to OFF or...
• Move a jumper on the chime from one location to another.
Set the matching two dip switches on the push button to
match the jumper settings on the chime.
Example: In the chime, move the chime jumper at location “5” to location “4”. In the push button, set the “5” dip
switch to OFF and the “4” dip switch to ON.
Note: Code positions 1 through 7 must be exactly the
same for both the push button and chime for this system
to function.
Note: Unit will come factory set with dip switches 5, 6, and 7
in the ON position (see Figure 7).
The range of the wireless chime can vary with location, temperature, and battery condition.
ON
* Code Settings 1-7
Must Match Both Push
Button and Chime
Inside Push Button
Chime
Figure 7
Note: Some models might require the use of tweezers to remove and
replace the jumpers or a small screw driver to set dip switches.
598-1312-00
-6-
Halo Lighted Push Button Feature
This Heath®/Zenith wireless push button contains a LED (Light
Emitting Diode). This patented technology lights the push button
making it more visible for your guests at night.
Technical Service
Please call 1-800-858-8501 (English speaking only)
for assistance before returning product to store.
FT
If you experience a problem, follow this guide. You may also want
to visit our Web site at: www.hzsupport.com. If the problem
persists, call* for assistance at 1-800-858-8501, 7:30 AM to
4:30 PM CST (M-F). You may also write* to:
HeathCo LLC
P.O. Box 90045
Bowling Green, KY 42102-9045
ATTN: Technical Service
* If contacting Technical Service, please have the following
information available: Model Number, Date of Purchase, and
Place of Purchase.
No Service Parts Available for this Product
Regulatory Information
This device complies with Part 15 of the FCC Rules and RSS210 of Industry Canada. Operation is subject to the following
two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
The user is cautioned that changes or modifications not
expressly approved by the party responsible for regulatory compliance could void the user’s authority to operate the
equipment.
598-1312-00
-7-
FIVE YEAR LIMITED WARRANTY
FT
This is a “Limited Warranty” which gives you specific legal rights.
You may also have other rights which vary from state to state or
province to province.
For a period of five years from the date of purchase, any malfunction
caused by factory defective parts or workmanship will be corrected
at no charge to you.
Not Covered - Repair service, adjustment and calibration due
to misuse, abuse or negligence, batteries, and other expendable
items are not covered by this warranty. Unauthorized service or
modification of the product or of any furnished component will
void this warranty in its entirety. This warranty does not include
reimbursement for inconvenience, installation, setup time, loss of
use, unauthorized service, or return shipping charges.
This warranty covers only HeathCo LLC assembled products and is
not extended to other equipment and components that a customer
uses in conjunction with our products.
THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER
WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY WARRANTY, REPRESENTATION OR CONDITION OF MERCHANT
ABILITY OR THAT THE PRODUCTS ARE FIT FOR ANY PARTICULAR PURPOSE OR USE, AND SPECIFICALLY IN LIEU OF
ALL SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL
DAMAGES.
REPAIR OR REPLACEMENT SHALL BE THE SOLE REMEDY
OF THE CUSTOMER AND THERE SHALL BE NO LIABILITY ON
THE PART OF HEATHCO LLC FOR ANY SPECIAL, INDIRECT,
INCIDENTAL, OR CONSEQUENTIAL DAMAGES, INCLUDING
BUT NOT LIMITED TO ANY LOSS OF BUSINESS OR PROFITS,
WHETHER OR NOT FORESEEABLE. Some states or provinces
do not allow the exclusion or limitation of incidental or consequential
damages, so the above limitation or exclusion may not apply to
you. Please keep your dated sales receipt, it is required for all
warranty requests.
HeathCo LLC reserves the right to discontinue and to change
specifications at any time without notice without incurring any obligation to incorporate new features in previously sold products.
598-1312-00
-8-

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Extract, Print high-res
Page Count                      : 8
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:187a937a-4099-43e0-acaf-5b20058879d3
Producer                        : Acrobat Distiller 6.0 (Windows)
Create Date                     : 2008:05:30 17:59:35-07:00
Creator Tool                    : PScript5.dll Version 5.2.2
Modify Date                     : 2008:05:30 18:00:12-07:00
Metadata Date                   : 2008:05:30 18:00:12-07:00
Document ID                     : uuid:15e2bd7d-0eb6-4bb8-bb68-7be435119e4a
Format                          : application/pdf
Creator                         : jessica.jiang
Title                           : User Manual.pdf
Author                          : jessica.jiang

EXIF Metadata provided by EXIF.tools