Hetronic MILLER-FC Foot Pedal Control Transmitter User Manual User s Manual Miller Foot Control

Download:
Mirror Download [FCC.gov]
Document ID	1361578
Application ID	QOgfByTfYuwAxbIAg6Y8RQ==
Document Description	manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	4.29kB (53594 bits)
Date Submitted	2010-10-15 00:00:00
Date Available	2010-10-18 00:00:00
Creation Date	2010-09-13 13:42:25
Producing Software	Acrobat Distiller 6.0.1 (Windows)
Document Lastmod	2010-10-04 09:37:36
Document Title	Microsoft Word - User's Manual-Miller Foot Control
Document Creator	PScript5.dll Version 5.2
Document Author:	rflores

User’s Manual
Miller Foot Control
1. DESCRIPTION
The Miller Foot Control (M-TX or Foot Pedal) is a transmitter with one analog channel. The module
is equipped with variable R.F. duty cycle, and variable turn off time (30 seconds for Footpedal). It
operates on 2 selected channels from 16 selectable 2.4GHz frequency channels.
Note: Operation is subject to the following two conditions: (1) this device may not
cause interference, and (2) this device must accept any interference that may cause
undesired operation of the device.
2. TECHNICAL SPECIFICATIONS
Temperature Range
Supply Voltage Range
Supply Current
Inputs
Outputs
Low voltage detection level
Shutdown voltage level
-30o to +70o Celsius
3-10Vdc
10mA max after 5 seconds settling time
1 Power Switch
1 Analog (Potentiometer Input)
2.4 GHz 1-10% Duty Cycle
3.4~3.5Vdc (Adjustable to Low/Mid/High)
2.7Vdc
Note: The user is cautioned that changes or modifications not expressly approved by
the party responsible for compliance could void the user’s authority to operate the
equipment.
3. FUNCTIONAL DESCRIPTION
3.1.Transmitter Operation
• This transmitter is designed to be used with RF-transmission duty cycle of 1% to 10%.
• Upon closing the PWR SW, the coder will turn ON and start RF-transmission of non-Stop
telegrams with active DK3, the safety DK for the analog input.
• DK3 is active if there is no potentiometer error and the PWR SW in ON.
• The analog input is converted into 8-bit data (0x00~0xFF) and transmitted as DK17~DK24
with DK17 as LSB.
3.2.Potentiometer Open Error Detect
The unit is equipped with potentiometer error detection. It detects if the potentiometer is
broken (open) or not connected.
3.3.Low Voltage Indicator
The unit has a low battery detection function. The level can be programmed (the actual
voltage is not programmed, just Short, Medium, Long delay before the batteries die). If the
input voltage reaches a critical level (2.7~2.85Vdc) the transmitter will automatically
shutdown.
3.4.Learning Function
The system has a learning function to allow users to pair a decoder to a coder’s channel and
address settings. The procedure to use the learning function is as follows:
3.4.1.
Press and hold the learning button on the decoder.
3.4.2.
Press pedal to maximum and hold.
3.4.3.
The decoder’s green LED will begin blinking rapidly to indicate data is being
received from the coder and that the learning function is complete.
3.4.4.
Release the decoder’s learning switch.
NOTE: Learning is only possible during the first 2 seconds that the M-TX is at maximum output.
The Receiver will only learn if the Pedal is close to the Receiver. The address of the RX and
M-TX are combined so only this pair is bound. Receiver Main-Contact will not close until
second activation.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 3
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:3c90b612-7c8c-49b8-8408-88c49898577f
Producer                        : Acrobat Distiller 6.0.1 (Windows)
Create Date                     : 2010:09:13 13:42:25-05:00
Creator Tool                    : PScript5.dll Version 5.2
Modify Date                     : 2010:10:04 09:37:36-05:00
Metadata Date                   : 2010:10:04 09:37:36-05:00
Document ID                     : uuid:45e266ae-967f-4175-939f-363f520e2e68
Format                          : application/pdf
Creator                         : rflores
Title                           : Microsoft Word - User's Manual-Miller Foot Control
Author                          : rflores

EXIF Metadata provided by EXIF.tools