Hewlett Packard Enterprise AP3850 3COM WLAN MANAGED AP3850 User Manual Installing a Trapeze MP 372

Hewlett-Packard Company 3COM WLAN MANAGED AP3850 Installing a Trapeze MP 372

UserManual.wiki >

Hewlett Packard Enterprise >

AP3850 User Manual

USERS MANUAL

3Com Corporation350 Campus DriveMarlborough, MA USA01752-3064Tel: +1 847-262-0070 Part Number: 730-9502-0131, Revision BFor the most current version of this documentsee www.3Com.comInstalling a 3Com™ Managed Access Point (MAP)™ This document provides basic hardware installation instructions for indoor MAP models.Cable Requirement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4Suspended Ceiling Installation—Flush Ceiling Tiles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4Suspended Ceiling Installation—Drop Ceiling Tiles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6Junction Box Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9Solid Wall or Ceiling Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10Tabletop Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12Configuring the MAP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13(For hardware installation instructions in Japanese, Korean, or Chinese, see the documentation CD or the web site.)ハードウェアの設置方法を日本語でご覧になりたい場合は、ドキュメントCDをご覧になるか、弊社ホームページをご利用下さい。 시스템 설치를 위한 한국어 설명서는 CD를 참조 하시기 바랍니다. 有关硬件安装说明, 请参考在附带文件CD 光盘或公司网页的中文安装手册有關硬件安装說明, 請参考在附带文件 C D 光盤或公司網頁的中文安装手册

Installing a 3Com™ Managed Access Point (MAP)™ 2 Warning! Installation must be performed by qualified service personnel only. Read and follow all warning notices and instructions marked on the product or included in the documentation. Before installing the product, read the rest of this document.Waarschuwing! De installatie mag alleen worden uitgevoerd door bevoegd onderhoudspersoneel. Het is essentieel dat u kennis neemt van alle waarschuwingen en instructies aangebracht op het product zelf en/of opgenomen in de documentatie. Voordat u het product installeert, dient u dit document in zijn geheel te hebben gelezen.Warnung! Die Installation darf nur von qualifiziertem Servicepersonal vorgenommen werden. Lesen und befolgen Sie alle Warnhinweise und -anleitungen auf dem Produkt bzw. in der Dokumentation. Lesen Sie vor Installation des Produkts den restlichen Teil dieses Dokuments. Avertissement ! L’installation ne peut être effectuée que par un personnel qualifié. Lisez et suivez tous les messages d’avertissement et les instructions inscrits sur le produit ou inclus dans la documentation. Avant d’installer le produit, lisez le reste de ce document.Attenzione! L’installazione deve essere effettuata unicamente da personale qualificato. Leggere e rispettare tutte le segnalazioni di attenzione e le istruzioni indicate sul prodotto o incluse nella documentazione. Prima d’installare il prodotto, leggere tutto il documento.¡Advertencia! La instalación debe realizarse exclusivamente por parte de personal de servicio cualificado. Lea y siga todas las notas de advertencia e instrucciones en el producto o la documentación. Antes de instalar el producto deberá leer la parte restante del presente documento. ¡Advertencia! A instalação dever ser realizada exclusivamente por pessoal de serviço qualificado. Leia e siga todas as notas de advertência e instrucões no produto ou na documentação. Antes de instalar o produto deverá ler a parte restante do presente documento. Varning! Installation får endast utföras av kvalificerad servicepersonal. Läs och följ alla varningsmeddelanden och instruktioner markerade på produkten eller inkluderade i dokumenteringen. Innan produkten installeras skall resten av dessa dokument läsas.Advarsel! Installation må kun gennemføres af faglært servicepersonale. Læs, og følg alle de advarselsmeddelelser og anvisninger, der er anført på produktet eller i dokumentationen. Læs resten af dette dokument før installation af produktet.Advarsel! Installasjon skal kun utføres av kvalifisert service personell. Les og følg alle varsels meldinger og instrukssjons merkinger på produktet og i veiledningen. Les resten av denne veiledningen før produktet installeres.

Installing a 3Com™ Managed Access Point (MAP)™ 3Varoitus! Installatie dient uitsluitend plaats te vinden door bevoegde monteurs. Lees alle waarschuwingen en instructies die op het product zijn aangegeven of in de documentatie zijn opgenomen, en volg deze op. Lees voordat u het product installeert eerst de rest van dit document.Viðvörun! Aðeins hæfir þjónustufulltrúar mega sinna uppsetningu tækjanna. Lesið og fylgið öllum viðvörunum og leiðbeiningum í þessum gögnum. Lesið restina af þessum gögnum fyrir uppsetningu.Προσοχή! Η εγκατάσταση πρέπει να εκτελείται μόνο από εγκεκριμένο προσωπικό συντήρησης. Διαβάστε και ακολουθείστε όλες τις προειδοποιήσεις και οδηγίες που αναγράφονται στο προϊόν ή που περιλαμβάνονται στην τεκμηρίωση. Πριν προβείτε στην εγκατάσταση του προϊόντος, διαβάστε το υπόλοιπο έγγραφο. 경고! 공인 서비스 기사만 설치 작업을 수행할 수 있습니다. 제품에 표시되어 있거나 설명서에 포함된 모든 경고 문구 및 지침을 읽어 보시고 준수하십시오. 제품을 설치하기 전에 본 설명서를 전체적으로 읽어 보시기 바랍니다. Warning! 設置は、資格を持ったサービス要員のみが行えます。製品に付いているあるいはドキュメントに含まれている全ての警告注意を読み、それに従ってください。製品を設置する前に、本ドキュメントの残りをお読みください。警告！安装工作只能由合格服务人员进行。请阅读且遵照所有在产品上或者在文件内标记的警告通知、说明。在安装产品之前，请阅读这份文件的剩余部分。 Внимание! Монтаж должен производить только квалифицированный обслуживающий персонал. Прочтите и выполняйте все предупредительные примечания и инструкции, нанесенные на изделие или включенные в документацию. Перед монтажом изделия прочтите данный документ до конца.

Cable RequirementInstalling a 3Com™ Managed Access Point (MAP)™ 4For more information about MAP installation as well as safety and installation requirements, see the following:z3Com Managed Access Point Installation Guidez3Com Regulatory InformationCable RequirementThe Ethernet ports on a MAP cannot accept a Cat 5 cable that has an uneven sheath such as the one shown in Figure 1. The RJ-45 connector on the cable will not seat properly in the receptacle on the MAP. Use a Cat 5 cable with an even sheath instead. Figure 1. Do Not Use a Cat 5 Cable with an Uneven SheathSuspended Ceiling Installation—Flush Ceiling TilesThis procedure applies to T-bars that are 23.9 mm (15/16 inches) wide. For a 14.2-mm (9/16-inch) or 15.9-mm (5/8-inch) T-bar, go to “Suspended Ceiling Installation—Drop Ceiling Tiles” on page 6..דבלב ךמסומ יאנכט ידי לע עצבתת הנקתהה !הרהזא תונמוסמה תוארוההו תורהזאה לכל םאתהב לעפו ארק .דועיתב תועיפומ וא רצומה לע .ואולמב הז ךמסמ ארק ,רצומה תנקתה ינפל Uneven sheath840-9502-0067MountingbracketMountingtemplateMobilitypoint840-9502-0089

Installing a 3Com™ Managed Access Point (MAP)™ 5Suspended Ceiling Installation—Flush Ceiling Tiles1Use the mounting template to cut a hole for the Cat 5 cable. 2Remove the mounting bracket from the MAP.3Attach the mounting bracket to the T-bar clamp.4Insert the Cat 5 cable through the port connector opening in the mounting bracket, then plug the cable into the MAP.840-9502-0011840-9502-0008T- b a r(Viewed from above ceiling tiles, looking down.)840-9502-0005Universal mountingbracketPort connectoropeningT- b a rUniversal mounting bracket840-9502-0004Port connectoropening840-9502-0002

Suspended Ceiling Installation—Drop Ceiling TilesInstalling a 3Com™ Managed Access Point (MAP)™ 65Attach the MAP to the mounting bracket.Suspended Ceiling Installation—Drop Ceiling TilesThis procedure applies to T-bars that are 23.9 mm (15/16 inches), 14.2-mm (9/16-inches), or 15.9-mm (5/8-inches) wide. You also can use this procedure for flush ceilings with 14.2-mm (9/16-inch) or 15.9-mm (5/8-inch) T-bars.1Use the mounting template to cut a hole for the Cat 5 cable. Caution! If you plan to use an external antenna for the 802.11b/g or 802.11a radio, install the antenna at least 20 cm from the MAP. (For installation instructions, see Installing an External Antenna for a 3Com Corporation Managed Access Point.)840-9502-0006LockT-barT-bar clamps(use set that fits T-bar) MountingtemplateMountingbracketMobilitypoint840-9502-0088

Installing a 3Com™ Managed Access Point (MAP)™ 7Suspended Ceiling Installation—Drop Ceiling Tiles2Install the T-bar clamp that fits the T-bar. 3Remove the mounting bracket from the MAP.4Attach the mounting bracket to the T-bar clamp.T-barT-bar clamp halvesSlide together840-9502-000323.9-mm (15/16-inch) or 14.2-mm (9/16-inch) T-barT-barT-bar clamp halvesSlide together840-9502-006615.9-mm (5/8-inch) T-bar(The clamps are different widths but the assembly is the same.)840-9502-0011840-9502-0008T- barT-bar clamps(attachedto T-bar)Universal mountingbracket840-9502-0012(Viewed from above ceiling tiles, looking down.)Port connectoropeningT- b a rUniversal mounting bracket840-9502-0004Port connectoropening

Suspended Ceiling Installation—Drop Ceiling TilesInstalling a 3Com™ Managed Access Point (MAP)™ 85Insert the Cat 5 cable through the port connector opening in the mounting bracket, then plug the cable into the MAP.6Attach the MAP to the mounting bracket.Caution! If you plan to use an external antenna for the 802.11b/g or 802.11a radio, install the antenna at least 20 cm from the MAP. (For installation instructions, see Installing an External Antenna for a 3Com Corporation Managed Access Point.)840-9502-0002840-9502-0006LockT-bar

Installing a 3Com™ Managed Access Point (MAP)™ 9Junction Box InstallationJunction Box Installation1Remove the mounting bracket from the MAP.2Attach the bracket to the junction box.Mounting hardwareMountingbracketMobilitypoint840-9502-0090840-9502-0011840-9502-0008840-9502-0017Junction boxPort connectoropening

Solid Wall or Ceiling InstallationInstalling a 3Com™ Managed Access Point (MAP)™ 103Plug the Cat 5 cable into the MAP and attach the MAP to the mounting bracket.Solid Wall or Ceiling Installation1Use the mounting template to cut a hole for the Cat 5 cable. 2Remove the mounting bracket from the MAP.Caution! If you plan to use an external antenna for the 802.11b/g or 802.11a radio, install the antenna at least 20 cm from the MAP. (For installation instructions, see Installing an External Antenna for a 3Com Corporation Managed Access Point.)840-9502-0062LockMountinghardwareMountingtemplateMountingbracketMobilitypoint840-9502-0091840-9502-0011840-9502-0008

Installing a 3Com™ Managed Access Point (MAP)™ 11Solid Wall or Ceiling Installation3Attach the bracket to the wall or ceiling.4Plug the Cat 5 cable into the MAP and attach the MAP to the mounting bracket.Caution! If you plan to use an external antenna for the 802.11b/g or 802.11a radio, install the antenna at least 20 cm from the MAP. (For installation instructions, see Installing an External Antenna for a 3Com Corporation Managed Access Point.)840-9502-0015840-9502-0016Universal mounting bracketCable840-9502-0062Lock

Tabletop InstallationInstalling a 3Com™ Managed Access Point (MAP)™ 12Tabletop Installation1Remove the mounting bracket from the MAP.2Reverse the bracket and reattach it to the MAP.Rubber feetMountingbracketMobilitypoint840-9502-0092840-9502-0011840-9502-0008840-9502-0061 840-9502-0062Lock

Installing a 3Com™ Managed Access Point (MAP)™ 13Configuring the MAP3Attach the rubber feet.4Turn the MAP over and place it on the table.Configuring the MAPTo configure the channels, power settings, and other MAP parameters, see the following:z3Com Mobility System Software Quick Start Guidez“Configuring MAP Access Points” chapter in the 3Com Mobility System Software Configuration GuideCaution! If you plan to use an external antenna for the 802.11b/g or 802.11a radio, install the antenna at least 20 cm from the MAP. (For installation instructions, see Installing an External Antenna for a 3Com Corporation Managed Access Point.)840-9502-0013

Regulatory Information The 3Com WLAN Managed AP3850, Model AP3850 (3CRWX385075A) must be installed and used in strict accordance with the manufacturer’s instructions as described in the user documentation that comes with the product. This product contains encryption. It is unlawful to export out of the U.S. without obtaining a U.S. Export License. This product does not contain any user serviceable components. Any unauthorized product changes or modifications will invalidate 3Com’s warranty and all applicable regulatory certifications and approvals. This product must be installed by a professional technician/installer. Only antennas specified for your region by 3Com can be used with this product. The use of external amplifiers or non-3Com antennas may invalidate regulatory certifications and approvals. This product can be used with the following antennas and accessories: Item Description Exclusions - Integrated antenna None 3CWE591 3Com 6/8dBi Dual-Band Omni Antenna Must be used with 3CWE586 and one of the following: 3CWE580, 3CWE581 or 3CWE582. 3CWE580 3Com Ultra Low Loss 6-Foot Antenna Cable Must also use 3CWE586. 3CWE581 3Com Ultra Low Loss 20-Foot Antenna Cable Must also use 3CWE586. 3CWE582 3Com Ultra Low Loss 50-Foot Antenna Cable Must also use 3CWE586. 3CWE586 3Com RSMA to SMA 6-inch Antenna Cable Required for all external antennas (not required for integrated antenna). Suitable RF power levels for internal and external antennas are handled automatically by your 3Com Wireless Switch or Controller. Ensure that the switch or controller configuration is modified to use the antenna that is connected to the Access Point. Refer to the Mobility System Configuration Guide or to the 3Com Wireless LAN Switch Reference Manual to modify the access point settings. Caution: Exposure to Radio Frequency Radiation This device generates and radiates radio-frequency energy. In order to comply with FCC radio-frequency exposure guidelines for an uncontrolled environment, this equipment must be installed and operated while maintaining a minimum body to antenna distance of 20 cm (approximately 8 in.).

The installer of this radio equipment must ensure that the antenna is located or pointed such that it does not emit RF field in excess of Health Canada limits for the general population; consult Safety Code 6, obtainable from Health Canada’s website www.hc-sc.gc.ca/rpb. This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. This product must maintain a minimum body to antenna distance of 20 cm. Under these conditions this product will meet the Basic Restriction limits of 1999/519/EC [Council Recommendation of 12 July 1999 on the limitation of exposure of the general public to electromagnetic fields (0 Hz to 300 GHz)]. US – Radio Frequency Requirements This device must not be co-located or operated in conjunction with any other antenna or transmitter. This device is for indoor use only when using channels 36, 40, 44 or 48 in the 5.15 to 5.25 GHz frequency range. High power radars are allocated as primary users of the 5.25 to 5.35 GHz and 5.65 to 5.85 GHz bands. These radar stations can cause interference with and/or damage this device. FCC NOTICE: To comply with FCC part 15 rules in the United States, the system must be professionally installed to ensure compliance with the Part 15 certification. It is the responsibility of the operator and professional installer to ensure that only certified systems are deployed in the United States. The use of the system in any other combination (such as co-located antennas transmitting the same information) is expressly forbidden in accordance with FCC rules CFR47 Part 15.204.

Complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 3Com WLAN Managed AP3950 Model AP3850 Industry Canada – RF Compliance This device complies with RSS 210 of Industry Canada. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of this device. L ‘ utilisation de ce dispositif est autorisée seulement aux conditions suivantes: (1) il ne doit pas produire de brouillage et (2) l’ utilisateur du dispositif doit étre prêt à accepter tout brouillage radioélectrique reçu, même si ce brouillage est susceptible de compromettre le fonctionnement du dispositif. The term "IC" before the equipment certification number only signifies that the Industry Canada technical specifications were met. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (EIRP) is not more than that required for successful communication. To prevent radio interference to the licensed service, this device is intended to be operated indoors and away from windows to provide maximum shielding. Equipment (or its transmit antenna) that is installed outdoors is subject to licensing. Pour empecher que cet appareil cause du brouillage au service faisant l'objet d'une licence, il doit etre utilize a l'interieur et devrait etre place loin des fenetres afin de Fournier un ecram de blindage maximal. Si le matriel (ou son antenne d'emission) est installe a l'exterieur, il doit faire l'objet d'une licence. High power radars are allocated as primary users of the 5.25 to 5.35 GHz and 5.65 to 5.85 GHz bands. These radar stations can cause interference with and/or damage this device. This device must not be co-located or operated in conjunction with any other antenna or transmitter. The band 5150-5250 MHz is only for indoor usage to reduce the potential for harmful interference to co-channel mobile satellite systems.

This device has been designed to operate with the antennas listed at the start of the Regulatory Information section above, and having a maximum gain of 6 dB (2.4GHz) or 8dB (5GHz). Antennas not included in this list or having a gain greater than 6 dB (2.4GHz) or 8dB (5GHz) are strictly prohibited for use with this device. The required antenna impedance is 50 ohms. Industry Canada – Emissions Compliance Statement This Class B digital apparatus complies with Canadian ICES-003. Avis de Conformité à la Réglementation d’Industrie Canada Cet appareil numérique de la classe B est conform à la norme NMB-003 du Canada. Safety Compliance Notice This device has been tested and certified according to the following safety standards and is intended for use only in Information Technology Equipment which has been tested to these or other equivalent standards: ■ UL 60950-1 ■ CSA 60950-1 ■ IEC 60950-1 ■ EN 60950-1 EU Compliance EU Representative: 3Com Europe Limited Peoplebuilding 2, Peoplebuilding Estate Maylands Avenue Hemel Hempstead, Hertfordshire HP2 4NW United Kingdom This equipment may be operated in AT BE CY CZ DK EE FI FR DE GR HU IE IT LV LT LU MT NL PL PT SK SI ES SE GB IS LI NO CH BG RO TR Intended use: IEEE 802.11a/b/g radio LAN device

NOTE: To ensure product operation is in compliance with local regulations, select the country in which the product is installed Česky [Czech] 3Com Coporation tímto prohlašuje, že tento RLAN device je ve shodě se základními požadavky a dalšími příslušnými ustanoveními směrnice 1999/5/ES. Dansk [Danish] Undertegnede 3Com Corporation erklærer herved, at følgende udstyr RLAN device overholder de væsentlige krav og øvrige relevante krav i direktiv 1999/5/EF. Deutsch [German] Hiermit erklärt 3Com Corporation, dass sich das Gerät RLAN device in Übereinstimmung mit den grundlegenden Anforderungen und den übrigen einschlägigen Bestimmungen der Richtlinie 1999/5/EG befindet. Eesti [Estonian] Käesolevaga kinnitab 3Com Corporation seadme RLAN device vastavust direktiivi 1999/5/EÜ põhinõuetele ja nimetatud direktiivist tulenevatele teistele asjakohastele sätetele. English Hereby, 3Com Corporation, declares that this RLAN device is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. Español [Spanish] Por medio de la presente 3Com Corporation declara que el RLAN device cumple con los requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 1999/5/CE. Ελληνική [Greek] ΜΕ ΤΗΝ ΠΑΡΟΥΣΑ 3Com Corporation ΔΗΛΩΝΕΙ ΟΤΙ RLAN device ΣΥΜΜΟΡΦΩΝΕΤΑΙ ΠΡΟΣ ΤΙΣ ΟΥΣΙΩΔΕΙΣ ΑΠΑΙΤΗΣΕΙΣ ΚΑΙ ΤΙΣ ΛΟΙΠΕΣ ΣΧΕΤΙΚΕΣ ΔΙΑΤΑΞΕΙΣ ΤΗΣ ΟΔΗΓΙΑΣ 1999/5/ΕΚ. Français [French] Par la présente 3Com Corporation déclare que l'appareil RLAN device est conforme aux exigences essentielles et aux autres dispositions pertinentes de la directive 1999/5/CE. Italiano [Italian] Con la presente 3Com Corporation dichiara che questo RLAN device è conforme ai requisiti essenziali ed alle altre disposizioni pertinenti stabilite dalla direttiva 1999/5/CE. Latviski [Latvian] Ar šo 3Com Corporation deklarē, ka RLAN device atbilst Direktīvas 1999/5/EK būtiskajām prasībām un citiem ar to saistītajiem noteikumiem. Lietuvių [Lithuanian] Šiuo 3Com Corporation deklaruoja, kad šis RLAN device atitinka esminius reikalavimus ir kitas 1999/5/EB Direktyvos nuostatas. Nederlands [Dutch] Hierbij verklaart 3Com Corporation dat het toestel RLAN device in overeenstemming is met de essentiële eisen en de andere relevante bepalingen van richtlijn 1999/5/EG. Malti [Maltese] Hawnhekk, 3Com Corporation, jiddikjara li dan RLAN device jikkonforma mal-ħtiġijiet essenzjali u ma provvedimenti oħrajn relevanti li hemm fid-Dirrettiva 1999/5/EC. Magyar [Hungarian] Alulírott, 3Com Corporation nyilatkozom, hogy a RLAN device megfelel a vonatkozó alapvetõ követelményeknek és az 1999/5/EC irányelv egyéb elõírásainak. Polski [Polish] Niniejszym 3Com Corporation oświadcza, że RLAN device jest zgodny z zasadniczymi wymogami oraz pozostałymi stosownymi postanowieniami Dyrektywy 1999/5/EC. Português [Portuguese] 3Com Corporation declara que este RLAN device está conforme com os requisitos essenciais e outras disposições da Directiva 1999/5/CE. Slovensko [Slovenian] 3Com Corporation izjavlja, da je ta RLAN device v skladu z bistvenimi zahtevami in ostalimi relevantnimi določili direktive 1999/5/ES. Slovensky [Slovak] 3Com Corporation týmto vyhlasuje, že RLAN device spĺňa základné požiadavky a všetky príslušné ustanovenia Smernice 1999/5/ES. Suomi [Finnish] 3Com Corporation vakuuttaa täten että RLAN device tyyppinen laite on direktiivin 1999/5/EY oleellisten vaatimusten ja sitä koskevien direktiivin muiden ehtojen mukainen. Svenska [Swedish] Härmed intygar 3Com Corporation att denna RLAN device står I överensstämmelse med de väsentliga egenskapskrav och övriga relevanta bestämmelser som framgår av direktiv 1999/5/EG. Íslenska [Icelandic] Hér með lýsir 3Com Corporation yfir því að RLAN device er í samræmi við grunnkröfur og aðrar kröfur, sem gerðar eru í tilskipun 1999/5/EC. Norsk [Norwegian] 3Com Corporation erklærer herved at utstyret RLAN device er i samsvar med de grunnleggende krav og øvrige relevante krav i direktiv 1999/5/EF. A copy of the signed Declaration of Conformity can be downloaded from the Product Support web page for the 3Com Managed AP3850, Model AP3850 (3CRWX385075A) at http://www.3com.com. Also available at http://support.3com.com/doc/AP3850_EU_DOC.pdf

EU – Restrictions for Use in the 2.4GHz band This device may be operated indoors or outdoors in all countries of the European Community using the 2.4GHz band: Channels 1 – 13, except where noted below.  In Italy the end-user must apply for a license from the national spectrum authority to operate this device outdoors.  In Belgium outdoor operation is only permitted using the 2.46 – 2.4835 GHz band: Channel 13.  In France outdoor operation is only permitted using the 2.4 – 2.454 GHz band: Channels 1 – 7. EU – Restrictions for Use in the 5GHz band Allowed Frequency Bands Allowed Channel Numbers Countries 5.15-5.35 & 5.470-5.725GHz 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140 Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Liechtenstein, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, U.K.  This device may be not be operated outdoors when using the bands 5150-5350MHz (Channels 36, 40, 44, 48, 52, 56, 50, 64).  In Italy the end-user must apply for a license from the national spectrum authority to operate this device outdoors.  To remain in conformance with European spectrum usage laws for Wireless LAN operation, the above 5GHz channel limitations apply. The user should check the current channel of operation. If operation is occurring outside of the allowable frequencies as listed above, the user must cease operating the Access Point at that location and consult the local technical support staff responsible for the wireless network.  The 5 GHz Turbo mode feature is not allowed for operation in any European Community country.  This device must be used with the radar detection feature required for European Community operation in the 5GHz bands. This device will avoid operating on a channel occupied by any radar system in the area. The presence of nearby radar operation may result in temporary interruption in communications of this device. The Access Point’s radar detection feature will automatically restart operation on a channel free of radar. You may consult with the local technical support staff responsible for the wireless network to ensure the Access Point device(s) are properly configured for European Community operation.

Navigation menu