Hewlett Packard Enterprise ARBT0200 BLE Beacon User Manual Aruba LS BT1 Location Beacon Installation Guide

Download:
Mirror Download [FCC.gov]
Document ID	3200159
Application ID	teo90thECWkNZfeEwWqlJw==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	107.76kB (1347004 bits)
Date Submitted	2016-11-18 00:00:00
Date Available	2017-05-17 00:00:00
Creation Date	2009-02-02 14:14:59
Producing Software	Acrobat Distiller 11.0 (Windows)
Document Lastmod	2016-03-16 15:36:22
Document Title	Aruba LS-BT1 Location Beacon Installation Guide
Document Creator	FrameMaker 12.0
Document Author:	Aruba Networks Inc.

Aruba LS-BT20 Location Beacon
Installation Guide
About the LS-BT20 Location Beacon
Figure 2 Attaching the Adhesive Pads
The LS-BT20 location beacon is designed to provide real-time location and
proximity engagement with the Meridian Mobile Engagement tools. The key
features are:
5. Attach the bottom cover, as shown in Figure 6.
FCC Class B Part 15
Figure 6 Attaching the Bottom Cover
This device complies with Part 15 of the Federal Communications
Commission (FCC) Rules. Operation is subject to the following two
conditions:

Highly-accurate location identification


Stand-alone device to protect user privacy


Low power consumption

Easy to deploy, test, and use
Package Contents

LS-BT20 location beacon

Four adhesive pads

Installation Guide (this document, printed)
LS-BT20 Overview
The following figure shows the front and back view of an LS-BT20 location
beacon:
Figure 1 LS-BT20 Front and Back View
2. Peel off the protective film on the adhesive, and attach the device onto
the desired flat surface.
Battery Replacement
Battery replacement is required to maximize the lifespan of this device. To
replace the batteries, follow the steps below in the order they are listed.
Danger of explosion if battery is incorrectly replaced. Replace only with the
same or equivalent type recommended by the manufacturer. Dispose of
used batteries according to the manufacturer's instructions.
Configuring/Provisioning LS-BT20 Devices
The LS-BT20 devices are configured or provisioned using the Aruba Beacons
app. For more informations, see
http://docs.meridianapps.com/developers/beacons_app
Product Specifications
Physical

Device dimensions (HxWxL): 16 mm x 47 mm x 47 mm
Electrical
Model: ARBT0200
FCC ID Q9DARBT0200 IC: 4675A-ARBT0200
1. Insert a flat head screwdriver in the rectangular tab on the right side of
the device, as show in Figure 3.
2. Push the tab downwards to detach the bottom cover from the device.
Figure 3 Tab to Detach the Bottom Cover



Grooves: on the bottom of the device at the four corners, used for
attaching adhesive pads.

Coin battery capacity: 2000 mAh

Voltage: 3 V

Tx = -23 dBm to 0 dBm (23 dB dynamic range)

Rx sensitivity = Approximately -94 dBm (1 Mbps)

Working Frequency range: 2450 Âą 50 MHz

Operation temperature: 0 °C to 50 °C
RF Radiation Exposure Statement: This equipment complies with FCC RF
radiation exposure limits. This equipment should be installed and operated
with a minimum distance of 7.9 inches (20 cm) between the radiator and your
body for 2.4 GHz operation. This transmitter must not be co-located or
operating in conjunction with any other antenna or transmitter.
Mylar Tab: extends out from the bottom of the device, pulled out for
activating batteries.
The LS-BT20 location beacon is referred to as device in rest of the document.
The device is powered using two CR2477 coin batteries. To activate the
device, pull out the tab that extends out from the bottom of the device.
Power Supply: Two CR2477 coin batteries
RF Performance
Rectangular Tab: on the left of the device, used for detaching the
bottom cover.
Activation

3. Lift the batteries from their slots using a non-metallic flat head
screwdriver, as shown in Figure 4.
Figure 4 Removing the Battery
Safety and Regulatory Compliance
Aruba Networks provides a multi-language document that contains
country-specific restrictions and additional safety and regulatory
information for all Aruba devices.
Installation
Regulatory Model Names
The device ships with adhesive pads to install the device on a flat surface in
an indoor environment.
The regulatory model name for the LS-BT20 is ARBT0200. For complete
regulatory model information, refer to the label located on the back panel
of this device.
Optional accessory kits are available that allow you to mount the device in
an indoor and outdoor environment. For more information about the
indoor and outdoor mounting kits, contact your Aruba sales representative.
Figure 7 Regulatory Label Placement for the LS-BT20
Before installing the device, ensure that:

4. Snap the new batteries into the slots, as shown in Figure 5.
Figure 5 Replacing the Battery
the mounting surface is indoor, flat, clean, and dust-free.
It is recommended to clean the surface using a solvent with a 50/50
Isopropyl Alcohol and water mixture.

the grooves for adhesive pads on the bottom of the device is dust-free.

the device is activated.
This device must accept any interference received, including interference
that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the
manufacturer’s instructions, may cause interference harmful to radio
communications.
If this equipment does cause interference, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.


Connect the equipment to an outlet on a circuit different from that to
which the receiver is connected.
Consult the dealer or an experienced radio or TV technician for help.
Canada
Under Industry Canada regulations, this radio transmitter may only operate
using an antenna of a type and maximum (or lesser) gain approved for the
transmitter by Industry Canada. To reduce potential radio interference to
other users, the antenna type and its gain should be so chosen that the
equivalent isotropically radiated power (e.i.r.p.) is not more than that
necessary for successful communication.
This device complies with Industry Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions:


This device may not cause interference
This device must accept any interference, including interference that
may cause undesired operation of the device.
Complies with the Class B limits for radio noise emissions as set out in the
interference-causing equipment standard entitled “Digital Apparatus,” ICES003 of Industry Canada.
Cet apareil numerique de la classe B respecte toutes les exigencies du
Reglement sur le materiel brouilleur du Canada.
Changes or modifications to this unit that are not expressly approved by
the party responsible for compliance could void the user’s authority to
operate this equipment.
EU Regulatory Conformance
This product is CE marked according to the provisions of the R &
TTE Directive (1999/5/EC) - CE. Aruba Networks Inc., hereby
declares that the ARBT0100 device model is in compliance with the essential
requirements and other relevant provisions of Directive 1999/5/EC -CE
The Declaration of Conformity made under Directive 1999/5/EC is available
for viewing at the following location: http://support.arubanetworks.com
European Union RoHS
Installation using the Adhesive Pads
The four corner grooves on the bottom of the device can be used to attach
the device on a flat surface.
This device may not cause harmful interference.
Installation Steps
1. Attach the adhesive pads provided in the package onto the four grooves
at the bottom of the device, as shown in Figure 2.
Aruba products also comply with the EU Restriction of
Hazardous Substances Directive 2011/65/EC (RoHS). EU
RoHS restricts the use of specific hazardous materials in
the manufacture of electrical and electronic equipment. Specifically,
restricted materials under the RoHS Directive are Lead (including Solder
used in printed circuit assemblies), Cadmium, Mercury, Hexavalent
Chromium, and Bromine. Some Aruba products are subject to the
exemptions listed in RoHS Directive Annex 7 (Lead in solder used in printed
circuit assemblies). Products and packaging will be marked with the “RoHS”
label shown at the left indicating conformance to this Directive.
Japan
China RoHS
Aruba products also comply with China environmental
10
declaration requirements and are labeled with the “EFUP 10”
Aruba LS-BT20 Location
Beacon
Installation Guide
label shown at the left. 本?品符合低功率電波輻射性電機管理辦
᳝↦᳝ᆇ⠽䋼ໄᯢ
Hazardous Materials Declaration
䚼ӊৡ⿄
(Parts)
⬉䏃ᵓ
(PCA Boards)
ᴎẄ㒘ӊ
(Mechanical Sub-Assemblies)
ƻ˖
᳝↦᳝ᆇ⠽䋼៪‫ܗ‬㋴(Hazardous Substance)
䬝
݁Ӌ䫀
໮⒈㘨㣃
&G
&U
3%%
䪙
3E
∲
+J
Ćť
Ćť
Ćť
Ćť
Ćť
Ćť
Ćť
Ćť
Ćť
Ćť
໮⒈Ѡ㣃䝮
3%'(
㸼⼎䆹᳝↦᳝ᆇ⠽䋼೼䆹䚼ӊ᠔᳝ഛ䋼ᴤ᭭Ёⱘ৿䞣ഛ೼ SJ/T11363-2006 ᷛ‫ޚ‬㾘ᅮⱘ䰤䞣㽕∖ҹϟDŽ
Indicates that the concentration of the hazardous substance in all homogeneous materials in the parts is
below the relevant threshold of the SJ/T11363-2006 standard.
h˖ 㸼⼎䆹᳝↦᳝ᆇ⠽䋼㟇ᇥ೼䆹䚼ӊⱘᶤϔഛ䋼ᴤ᭭Ёⱘ৿䞣䍙ߎ6-7ᷛ‫ޚ‬㾘ᅮⱘ䰤䞣㽕∖DŽ
Indicates that the concentration of the hazardous substance of at least one of all homogeneous materials
in the parts is above the relevant threshold of the SJ/T11363-2006 standard.
ᇍ䫔ଂП᮹ⱘ᠔ଂѻકᴀ㸼ᰒ⼎կᑨ䫒ⱘ⬉ᄤֵᙃѻકৃ㛑ࣙ৿䖭ѯ⠽䋼DŽ
This table shows where these substances may be found in the supply chain of electronic information
products, as of the date of sale of the enclosed product.
ℸᷛᖫЎ䩜ᇍ᠔⍝ঞѻકⱘ⦃ֱՓ⫼ᳳᷛᖫᶤѯ䳊䚼ӊӮ᳝ϔϾϡৠⱘ⦃ֱՓ⫼ᳳ
՟བ⬉∴ऩ‫ܗ‬῵ഫ 䌈೼݊ѻકϞ
ℸ⦃ֱՓ⫼ᳳ䰤া䗖⫼Ѣѻકᰃ೼ѻક᠟‫ݠ‬Ё᠔㾘ᅮⱘᴵӊϟᎹ԰
The Environment- Friendly Use Period (EFUP) for all enclosed products and their parts are
per the symbol shown here. The Environment- Friendly Use Period is valid only when the
product is operated under the conditions defined in the product manual.
本產品符合低功率電波輻射性電機管理辦法：
第十二條
經形式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不得擅自
變更頻率、加大功率或變更原設計之特性及功能。
第十四條
低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象
時，
應立即停用，並改善至無干擾時方的繼續使用。
前項合法通信，指依電信規定作業之無線電信。低功率射頻電機須忍受合法通信
或工業、科學及醫療用電波輻射性電機設備之干擾。
Proper Disposal of Aruba Equipment
Waste of Electrical and Electronic Equipment
Aruba products at end of life are subject to separate
collection and treatment in the EU Member States, Norway,
and Switzerland and therefore are marked with the symbol
shown at the left (crossed-out wheelie bin). The treatment
applied at end of life of these products in these countries
shall comply with the applicable national laws of countries
implementing Directive 2002/96EC on Waste of Electrical and
Electronic Equipment (WEEE).
a Hewlett Packard
Enterprise company
Contacting Support
Main Site
arubanetworks.com
Support Site
support.arubanetworks.com
Airheads Social Forums and Knowledge Base community.arubanetworks.com
North American Telephone
1-800-943-4526 (Toll Free)
1-408-754-1200
International Telephones
http://www.arubanetworks.com/
support-services/supportprogram/contact-support
Software Licensing Site
licensing.arubanetworks.com
End of Support information
http://www.arubanetworks.com/
support-services/end-of-lifeproducts/end-of-life-policy/
Security Incident Response Team (SIRT)
http://www.arubanetworks.com/
support-services/securitybulletins/
Support Email Addresses
Americas, APAC, and EMEA
support@arubanetworks.com
Security Incident Response Team (SIRT)
sirt@arubanetworks.com
Copyright
Š Copyright 2016 Hewlett Packard Enterprise Development LP
Open Source Code
Certain Aruba products include Open Source software code developed by third
parties, including software code subject to the GNU General Public License ("GPL"),
GNU Lesser General Public License ("LGPL"), or other Open Source Licenses. The
Open Source code used can be found at this site:
http://www.arubanetworks.com/open_source
Warranty
This hardware product is protected by an Aruba warranty. For details, see the Safety,
Compliance, and Warranty Information Guide included with this device.
a Hewlett Packard
Enterprise company
www.arubanetworks.com
1344 Crossman Avenue
Sunnyvale, California 94089
Phone: 408.227.4500
Fax 408.227.4550
Aruba LS-BT20 Location Beacon | Installation Guide
Part Number 0511880-01 | March 2016

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Language                        : en
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.150055, 2012/11/19-18:45:32
Creator Tool                    : FrameMaker 12.0
Modify Date                     : 2016:03:16 15:36:22-07:00
Create Date                     : 2009:02:02 14:14:59Z
Metadata Date                   : 2016:03:16 15:36:22-07:00
Format                          : application/pdf
Title                           : Aruba LS-BT1 Location Beacon Installation Guide
Creator                         : Aruba Networks Inc.
Producer                        : Acrobat Distiller 11.0 (Windows)
Document ID                     : uuid:48101246-f314-4caf-bbd1-bd18099d82d8
Instance ID                     : uuid:fe87b26c-ac62-4ea2-be7e-7c122cda98e7
Page Mode                       : UseOutlines
Page Count                      : 2
Author                          : Aruba Networks Inc.

EXIF Metadata provided by EXIF.tools