Hewlett Packard Enterprise SL3040 802.11a/b/g PCMCIA CardBus PC Card User Manual RPW196PDF
Hewlett-Packard Company 802.11a/b/g PCMCIA CardBus PC Card RPW196PDF
Contents
- 1. Users Manual
- 2. Revised users manual
Users Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 344298 |
| Application ID | sy0Y6BZXPyr23Fx5Q4q6lg== |
| Document Description | Users Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 22.33kB (279088 bits) |
| Date Submitted | 2003-07-30 00:00:00 |
| Date Available | 2003-09-30 00:00:00 |
| Creation Date | 2003-05-12 09:23:41 |
| Producing Software | Acrobat Distiller 5.0 (Windows) |
| Document Lastmod | 2003-05-12 14:48:23 |
| Document Title | RPW196PDF.book |
| Document Creator | FrameMaker 6.0 |
| Document Author: | bohumilg |
User Guide Wireless LAN PC Card 3CRPAG175 http://www.3com.com/ Published June 2003 User guide version 1.0.0 3Com Corporation ■ 5500 Great American Parkway ■ Santa Clara, California ■ 95052-8145 Copyright © 2003 3Com Corporation. All rights reserved. No part of this documentation may be reproduced in any form or by any means or used to make any derivative work (such as translation, transformation, or adaptation) without written permission from 3Com Corporation. 3Com Corporation reserves the right to revise this documentation and to make changes in content from time to time without obligation on the partof 3Com Corporation to provide notification of such revision or change. 3Com Corporation provides this documentation without warranty, term, or condition of any kind, either implied or expressed, including, but not limited to, the implied warranties, terms or conditions of merchantability, satisfactory quality, and fitness for a particular purpose. 3Com may make improvements or changes in the product(s) and/or the program(s) described in this documentation at any time. 3Com is a registered trademark and the 3Com logo is a trademark of 3Com Corporation. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other company and product names may be trademarks of the respective companies with which they are associated. Unless otherwise indicated, 3Com registered trademarks are registered in the United States and may or may not be registered in other countries. If there is any software on removable media described in this documentation, it is furnished under a license agreement included with the product as a separate document or in the hard copy documentation. If you are unable to locate a copy, please contact 3Com and a copy will be provided to you. UNITED STATES GOVERNMENT LEGEND If you are a United States government agency, then this documentation and the software described herein are provided to you subject to the following: All technical data and computer software are commercial in nature and developed solely at private expense. Software is delivered as "Commercial Computer Software" as defined in DFARS 252.227-7014 (June 1995) or as a "commercial item" as defined in FAR 2.101(a) and as such is provided with only such rights as are provided in 3Com's standard commercial license for the software. Technical data is provided with limited rights only as provided in DFAR 252.227-7015 (Nov 1995) or FAR 52.227-14 (June 1987), whichever is applicable. You agree not to remove or deface any portion of any legend provided on any licensed program or documentation contained in, or delivered to you in conjunction with, this user guide. Contents Installing Your Wireless LAN PC Card and Wireless LAN Manager Installation CD 1 Windows XP, 2000, Me, and 98 SE 1 Inserting Your Wireless LAN PC Card 2 Antennas 2 Using Wireless LAN Manager 2 Getting Connected with 3Com Wireless LAN Manager Creating New Connections 4 Troubleshooting Confirming Device Installation 7 Diagnosing Problems 7 Wireless LAN Adapter LED Indicators 8 Removing Your Wireless LAN PC Card 8 Updating the Wireless LAN PC Card Driver Windows XP and 2000 9 Windows Me and 98 SE 9 Technical Support 11 Online Technical Services 11 World Wide Web Site 11 3Com Knowledgebase Web Services 11 3Com FTP Site 11 Support from Your Network Supplier 12 Support from 3Com 12 Returning Products for Repair 12 Regulatory Compliance Information 13 FCC Part 15 Notice (Applicable to use within the USA) 13 Unintentional Radiator 13 Manufacturer’s Declaration of Conformity 14 Industry Canada Notice (Applicable for use within Canada) 14 Avis de conformité à la réglementation d’Industrie Canada 14 Industry Canada (IC) Emissions Compliance Statement 14 Avis de conformité a la réglementation d'Industrie Canada 14 Safety Notice 14 European Community CE Notice 15 Contents 1 Installing Your Wireless LAN PC Card and Wireless LAN Manager Installation CD The Installation CD contains: ■ ■ ■ ■ ■ "Setup programs and drivers for Windows XP, 2000, Millennium Edition (Windows Me), 98 Second Edition (SE) and Embedded XP 3Com Wireless LAN Manager "README.TXT file with updated information about your Wireless LAN PC Card This Wireless LAN PC Card User Guide Adobe Acrobat Reader Windows XP, 2000, Me, and 98 SE If you are accessing this guide as part of your LAN PC Card installation, skip to step 3 below. 1 With the computer on and Windows running, insert the Installation CD into the CDROM drive. The auto-start feature starts the installation. If nothing happens within five seconds, click Start > Run and type d:\setup.exe (where d: is your CD-ROM drive). 2 From the 3Com Wireless Installer main menu, select Install Wireless Product. 3 Wait for the installation program will prompt you to insert the PC Card into the slot (see the illustrations in the next section, "Inserting Your Wireless LAN PC Card"). 4 Your machine will run through the hardware installation and automatically launch the Wireless LAN Manager software installation. Respond to the prompts as they appear. 5 During the installation process, you may receive prompts for the Windows installation CD. Insert the CD for your Windows operating system and indicate the correct path. Your computer goes through a brief installation process during which it displays several windows indicating what is currently installing. 6 Restart the computer whenever you are prompted. 7 When your computer restarts you will be prompted to select country you will using the 3CRPAG175 Wireless LAN PC Card. It is very important that you select the correct country so product is properly configured for that country. 8 Your installation is now complete. 1 Installing Your Wireless LAN PC Card and Wireless LAN Manager Inserting Your Wireless LAN PC Card 3CRPAG175 Antennas The antenna on the 3CRPAG175 Wireless LAN PC Card is an XJACK antenna. Extend or retract the antenna like a ball-point pen-press it to extend and use it, press it again to retract or disable it. NOTE: The antenna on the 3CRPAG175 Wireless LAN PC Card must be extended for you to connect to your wireless network Using Wireless LAN Manager NOTE: Wireless LAN Manager defaults to automatically connect to any wireless network and no security. This default allows a basic connection to an access point. Key Features contained within 3Com Wireless LAN Manager: ■ ■ Ad Hoc or Access Point connections Wide range of security settings: including Getting Connected with 3Com Wireless LAN Manager 64, 128, 152 bit WEP ■ Light EAP ■ 802.1x - EAP-TLS, PEAP ■ WPA ( 64/128/152/AES) ■ TTLS ■ MD5 ■ 3Com Dynamic Security Link ■ Serial Authentication Multiple profile support with automatic profile activation capabilities ■ Profiles can be imported and exported for easy multiple machine setup For each profiles you can specify: ■ SSID name ■ Security settings ■ Applications that will automatically launch, such as VPN software ■ Default printer ■ File and print sharing for each profile ■ Static or Dynamic IP settings ■ ■ ■ After installation, consult with your network administrator and refer to 3Com's Wireless LAN Manager on line help for detailed information about the Wireless LAN Manager features and to change your default installation settings. Getting Connected with 3Com Wireless LAN Manager Your 3Com Wireless LAN PC card has been initially setup as follows: ■ ■ Network Name: This has been set to allow you to connect to any Access Point without encryption or authentication. Encryption: No encryption has been enabled. If 3Com Wireless LAN Manager does not show an active connection or you want to connect to a different wireless LAN network then you will need to create a new connection. 1 Installing Your Wireless LAN PC Card and Wireless LAN Manager Creating New Connections To make a Wireless LAN connection, click the Create New Connection button from the 3Com Launcher application. This will bring up the “New Connection” window. The new connection window will show a list of all the Wireless LAN connections that are available, and the type of network they are. “Access Point” networks are those with a device (Access Point) that you can use to connect to a standard network. “Ad Hoc” networks are for allowing direct connections between two or more computers with Wireless LAN devices. They are useful if no Access Points are available. If you see an Access Point connection with the network name “”, then the Access Point is choosing to not broadcast its SSID (network name). In this case, you must know the name of the network before you can connect to it. After you have selected the network you want to connect to, click the Connect or Advanced button. The Connect button will ask you for the minimum amount of information you need to make a connection. The Advanced button will allow you to specify additional information: Getting Connected with 3Com Wireless LAN Manager ■ ■ ■ ■ If you want to automatically make a VPN connection If you want to automatically launch an application The TCP/IP settings for the network Advanced settings After you complete the connection, the connection information will be stored in a profile with the network name of that connection. From the 3Com Launcher application, you can return to the profile you have just created by clicking on the Options Menu ( ) button and selecting that profile from the menu. After you have created multiple profiles, you can also switch between then with the Options Menu ( ) button. Selecting the “Automatic Profile Selection” option allows Wireless LAN Manager to try to choose the best profile for you depending on your location. The Profile Manager ( ) button activates the Wireless LAN Profile Manager application. You can use this application to activate profiles, edit profiles, create new profiles, and import or export profiles. You can also determine which profiles will be used if the “Automatic Profile Selection” option is selected, and in what order they will be tried. The Edit Current Profile ( ) button allows you to make changes to the currently selected profile. You can also make changes to a profile from the Wireless LAN Profile Manager, or by creating a new connection for the network name (which will overwrite the current profile). The Diagnostics ( ) button will display information about the current connection. The Help ( ) button will display information about the status of the current connection. 1 Installing Your Wireless LAN PC Card and Wireless LAN Manager 2 Troubleshooting Confirming Device Installation 1 With your PC Card installed in the computer, double-click the My Computer icon. If you are running Windows XP, click Start > Control Panel and go to step 3. 2 Double-click the Control Panel icon. 3 Double-click the System icon. The System Properties window appears, detailing your system setup. 4 Click the Device Manager tab. A list of devices appears, arranged by type. If you are using Windows XP or 2000, click the Hardware tab and click Device Manager. 5 Double-click Network Adapters. Select: 3Com 3CRPAG175 Wireless LAN PC Card 6 Double-click the entry to display a description of the current status. The device status should indicate "This device is working properly." 7 Close the windows you have opened until you return to the desktop. Diagnosing Problems If you have difficulty using the Wireless LAN PC Card, try the solutions in the following table. If you continue to experience difficulty, see the next two sections, "Uninstalling the PC Card" and "Uninstalling Wireless LAN Manager." Problem Solutions Wireless LAN PC Card LED is off Make sure the PC Card is properly inserted in the slot and that the XJACK antenna is fully extended. Check the Wireless LAN PC Card icon in the Windows control panel and make sure the PC Card type can be recognized. Wireless LAN PC Card installs as an unknown device Remove the unknown device and repeat the installation procedure. Make sure you insert the 3Com CD when the installation calls for it and that you wait for it to come up to speed in the drive. The Windows Add Hardware Wizard was unable to locate the Wireless LAN PC Card drivers. You may have had no CD or the wrong CD inserted in the drive, or the 3Com CD may not have been ready when the wizard looked for the drivers. Installation program does not finish or the driver fails to load Use the Device Manager to resolve resource conflicts that may exist. Select System from the Control Panel, and then click the Device Manager tab. Network association is intermittent. Make sure the XJACK antenna is fully extended. Try reorienting your laptop. For best use of the antenna: Computer operating system does not recognize the card ■ Keep the area around the antenna clear from materials that could block radio transmission, such as metal objects, electronic devices, and cordless telephones. ■ If the signal is weak, change the direction of your laptop slightly. ■ If necessary, move your computer a few inches to find a better signal. Make sure the PC Card is properly inserted in the slot and PCMCIA support is installed. Check whether a card is already in use. Windows XP, 2000, Me, and 98 SE: Check whether the computer has a Plug-and-Play BIOS. Visit www.3com.com to download the latest drivers. Refer to the Updating the Wireless LAN PC Card Driver section below. 2 Troubleshooting Problem Solutions No network association exists when the computer becomes active again after being in sleep mode or after the Wireless LAN PC Card is removed and reinserted Log out and log in again, or restart the computer to restore the connections. Wireless LAN Adapter LED Indicators Condition Description Off The computer does not recognize the Wireless LAN Adapter. Flashing on and off The Wireless LAN Adapter has power. Flickering Data transfer is taking place. Removing Your Wireless LAN PC Card Normally, you would not uninstall the Wireless LAN PC Card; however, in case a problem arises, you may want to uninstall and reinstall it. You can uninstall Wireless LAN Manager any time following the installation. The uninstall removes desktop icons, registry entry files, and files used by the adapter. 1 If you are using Windows 2000, Me, or 98 SE, click Start > Settings > Control Panel. If you are using Windows XP, click Start > Control Panel. 2 Click Add/Remove Programs. 3 Select 3Com Wireless LAN Manager. 4 Click Change/Remove. 5 Click Remove. 6 When the uninstall is complete, remove the adapter and restart your computer. Updating the Wireless LAN PC Card Driver To update your Wireless LAN PC Card driver software, find your operating system below, then follow the procedure. Updating the Wireless LAN PC Card Driver Windows XP and 2000 1 Insert your Wireless LAN PC Card into the PC card slot. 2 In Windows 2000, select Start> Settings > Control Panel , then double-click the System icon. In Windows XP, from your desktop or start menu, right-click My Computer and select Properties. 3 Select the Hardware tab and click Device Manager. 4 If necessary, click the plus sign (+) to expand the Network Adapters tree. 5 In Windows 2000, double-click the entry: 3Com 3CRWPAG175 Wireless LAN PC Card select the Driver tab, and click Update Driver. In Windows XP, right-click 3Com Wireless LAN Adapter and select Update Driver. 6 Insert the Installation CD. The Hardware Update Wizard window appears. 7 In Windows 2000, click Display list of known drivers so that I can choose a specific driver and click Next. In Windows XP, select Install from a list or specific location (Advanced) and click Next. 8 In Windows XP, select Don’t search. I will choose the driver to install and click Next. 9 When you are prompted to select an adapter, click Have Disk… and enter the drive letter for the Installation CD or enter the directory on your hard drive where the updated driver is located. Click Continue. 10 Select either 3Com 3CRPAG175 LAN PC and click Next. Follow the prompts through the remainder of the driver update. 11 When the installation has completed, click Finish. Windows Me and 98 SE 1 Insert your Wireless LAN PC Card into the PC card slot. 2 From the Windows Start menu, select Settings, then select Control Panel. 3 Double-click the System icon, then select Device Manager. 4 In the Device Manager window, expand the Network Adapters list. 5 Select either 3Com 3CRPAG175 Wireless LAN PC Card and click Properties. 6 Select Driver and click Update Driver. 7 In the Update Device Driver Wizard, follow the prompts to install the upgrade. 8 When prompted, click Restart for the changes to take effect. 2 10 Troubleshooting A Technical Support 3Com provides easy access to technical support information through a variety of services. This appendix describes these services. Information contained in this appendix is correct at time of publication. For the most recent information, 3Com recommends that you access the 3Com Corporation World Wide Web site. Online Technical Services 3Com offers worldwide product support 24 hours a day, 7 days a week, through the following online systems: ■ ■ ■ World Wide Web site 3Com Knowledgebase Web Services 3Com FTP site World Wide Web Site To access the latest networking information on the 3Com Corporation World Wide Web site, enter this URL into your Internet browser: http://www.3com.com/ This service provides access to online support information, such as technical documentation and a software library, as well as support options that range from technical education to maintenance and professional services. 3Com Knowledgebase Web Services The 3Com Knowledgebase is a database of technical information to help you install, upgrade, configure, or support 3Com products. The Knowledgebase is updated daily with technical information discovered by 3Com technical support engineers. This complimentary service, which is available 24 hours a day, 7 days a week to 3Com customers and partners, is located on the 3Com Corporation World Wide Web site at: http://knowledgebase.3com.com 3Com FTP Site Download drivers, patches, software, and MIBs across the Internet from the 3Com public FTP site. This service is available 24 hours a day, 7 days a week. To connect to the 3Com FTP site, enter the following information into your FTP client: ■ Hostname: ftp.3com.com ■ Username: anonymous ■ Password: NOTE: With Web browser software, such as Netscape Navigator and Internet Explorer, you do not need a user name and password. 11 A Technical Support Support from Your Network Supplier If you require additional assistance, consult your network supplier. Many suppliers are authorized 3Com service partners who are qualified to provide a variety of services, including network planning, installation, hardware maintenance, application training, and support services. When you consult your network supplier, have the following information ready: ■ Product model name, part number, and serial number ■ A list of system hardware and software, including revision levels ■ Diagnostic error messages ■ Details about recent configuration changes, if applicable If you are unable to consult your network supplier, see the following section on how to contact 3Com. Support from 3Com If you are unable to obtain assistance from the 3Com online technical resources or from your network supplier, 3Com offers technical telephone support services. To find out more about your support options, go to the Web site associated with your region of the world shown below. Region URL for Regional Web Site Asia and the Pacific Rim ap.3com.com/support Africa, Europe, and the Middle East emea.3com.com/support/supportnumbers.html Latin America lat.3com.com/ North America csoweb4.3com.com/contactus When you contact 3Com for assistance, have the following information ready: ■ ■ ■ ■ Product model name, part number, and serial number A list of system hardware and software, including revision levels Diagnostic error messages Details about recent configuration changes, if applicable Returning Products for Repair Before you send a product directly to 3Com for repair, you must first obtain an authorization number. Products sent to 3Com without authorization numbers will be returned to the sender unopened, at the sender's expense. To obtain an authorization number, go to the Web site listed above for your region. 12 Regulatory Compliance Information NOTE: This product contains encryption. It is unlawful to export out of the U.S. without obtaining a U.S. Export License. FCC Part 15 Notice (Applicable to use within the USA) CAUTION: FCC Radio-Frequency Exposure Notice This device generates and radiates radio-frequency energy. In order to comply with FCC radiofrequency radiation exposure compliance requirements, a separation distance of at least 2.5 cm (1.0 inch) must be maintained between the antenna of the device and all persons. This product does not contain any user serviceable components. Any unauthorized product changes or modifications will invalidate 3Com's warranty and all applicable regulatory certifications and approvals. Unintentional Radiator WARNING: This equipment has been tested and found to comply with the limits for a Class B digital device as applicable, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ■ Reorient or relocate the receiving antenna. ■ Increase the separation between the equipment and receiver. ■ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ■ Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undersired operation. The user may find the following booklet prepared by the Federal Communications Commission helpful: The Interference Handbook This booklet is available from the U.S. Government Printing Office, Washington, D.C. 20402. Stock No. 004000-00345-4. 13 Regulatory Compliance Information Manufacturer’s Declaration of Conformity 3Com Corporation 3930 W. Parkway Blvd. PO Box 704010 West Valley City, UT 84119 (800) 527-8677 Declares that the Product: Date: June 30, 2003 Brand Name: 3Com Corporation Model Number: SL-3040 Equipment Type: 802.11b/a/g Wireless PC Card Complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Industry Canada Notice (Applicable for use within Canada) This device complies with Canadian RSS-210. To prevent radio interference to the licensed service, this device is intended to be operated indoors and away from windows to provide maximum shielding. Equipment (or its transmit antenna) that is installed outdoors is subject to licensing. The installer of this radio equipment must ensure that the antenna is located or pointed such that it does not emit RF field in excess of Health Canada limits for the general population; consult Safety Code 6, obtainable from Health Canada's website www.hc-sc.gc.ca/rpb. Avis de conformité à la réglementation d’Industrie Canada Cet appareil est conform a la norme CNR-210 du Canada. Pour empecher que cet appareil cause du brouillage au service faisant l'objet d'une licence, cet appareil doit etre utilisé a l'intérieur seulement et devrait etra placé loin des fenetres afin de fournir un écran de blindage maximal. L'installateur du présent matériel radio doit s'assurer que l'antenne est située ou pointée de maniere a ce que cette derniére n'émette pas de champs radioélectriques supérieurs aux limites spécifiées par Santé Canada pour le grand public; condulter le Code de sécurité 6, disponible sur le site Web de Santé Canada, a l'adresse suivante: www.hc-sc.gc.ca/rpb. Industry Canada (IC) Emissions Compliance Statement This Class B digital apparatus complies with Canadian ICES-003. Avis de conformité a la réglementation d'Industrie Canada Cet appareil numérique de la classe B est conform a la norme NMB-003 du Canada. Safety Notice This device has been tested and certified according to the following safety standards and is intended for use only in Information Technology Equipment which has been tested to these or other equivalent standards: UL Standard 60950 (3rd Edition)/ CSA C22.2 No. 60950 IEC 60950 EN 60950 3Com Corporation SL-3040 Tested To Comply With FCC Standards FOR HOME OR OFFICE USE 14 European Community CE Notice European Community CE Notice Marking by the symbol indicates compliance with the essential requirements of Directive 73/23/ EC and the essential requirements of articles 3.1(b), 3.2 and 3.3 of Directive 1999/5/EC. Such marking is indicative that this equipment meets or exceeds the following technical standards: ■ ETS 300 328-2 — Electromagnetic compatibility and Radio spectrum Matters (ERM); Wideband Transmission systems; data transmission equipment operating in the 2,4GHz ISM band and using spread spectrum modulation techniques ■ ETN 301 489-17: V.1.1.1 (09-2000) - Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 17: Specific conditions for Wideband data and HIPERLAN equipment ■ EN 60950 - Safety of information technology equipment, including electrical business equipment. NOTE: Due to frequency restrictions, it is necessary to select your country before using this radio device. Refer to your 3Com Wireless LAN Manager online help for details. 3Com Wireless LAN PC Card User Guide version 1.0.0 Published April, 2002 15
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.2 Linearized : No Modify Date : 2003:05:12 14:48:23Z Create Date : 2003:05:12 09:23:41Z Page Count : 19 Creation Date : 2003:05:12 09:23:41Z Mod Date : 2003:05:12 14:48:23Z Producer : Acrobat Distiller 5.0 (Windows) Author : bohumilg Metadata Date : 2003:05:12 14:48:23Z Creator : bohumilg Title : RPW196PDF.book Page Mode : UseOutlinesEXIF Metadata provided by EXIF.tools