| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2709791 |
| Application ID | T0YQO5KtZSbmp2lLPlUbSw== |
| Document Description | Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 164.39kB (2054832 bits) |
| Date Submitted | 2015-08-10 00:00:00 |
| Date Available | 2015-08-10 00:00:00 |
| Creation Date | 2015-07-17 10:29:28 |
| Producing Software | Acrobat Distiller 9.0.0 (Windows) |
| Document Lastmod | 2015-07-17 10:29:28 |
| Document Title | Microsoft Word - YFZ-2015-0741 V90Plus 智能RTK系统使用说明书 _英文版_A0.doc |
| Document Creator | PScript5.dll Version 5.2.2 |
| Document Author: | Administrator |
Preface
Introduction
The introduction is applicable to V90 Plus products. V90 is a
new type of GNSS receiver used for measurement. The
introduction describes how to install, set and use V90
products.
In order to help you better use Hi-Target series products,
Hi-Target suggests you carefully reading the instruction. If you
are
unfamiliar
with
V90
products,
please
refer
to
www.hi-target.com.cn/en/
Tips for safe use
Note: the contents here generally are special
operations, needing your special attention.
Please read the contents carefully.
Warning: the contents here generally are very
important. In case of failing to operate
based on warning contents, it will damage
the machine, lose the data, break down the
system and endanger personal safety.
Exclusions
Before using the products, please carefully read the operating
instruction, and it will help you better use the product.
Hi-Target Surveying Instrument Co., Ltd will not assume the
responsibilities if you fail to operate the product according to
the requirements in operating instruction, or operate the
product wrongly because of failing to understand the operating
instruction.
Hi-Target is committed to constantly perfect product functions
and performance, improve service quality and reserve the
rights to change the contents in operating instruction without
separate notice.
We have checked the consistency between contents in
II
instruction and software & hardware, without eliminating the
possibility of deviation. The pictures in operating instruction
are only used for reference. In case of inconformity with
products, the products shall prevail.
Content
Product Introduction ...................................... 6
Preface ............................................... 7
Product Characteristics ............................... 8
Cautions for Use ...................................... 8
Introductions to Receiver ................................ 10
Receiver Appearance .................................. 11
Control Panel ........................................ 11
Upper Cover .......................................... 12
Bottom Cover ......................................... 12
Batteries ............................................ 14
Environmental Requirements ........................... 15
Electronic Jamming ................................... 16
Elementary Operation ..................................... 17
Control panel ........................................ 19
Function Key ......................................... 19
Status Inquiry ....................................... 20
LED Function ......................................... 20
Start and Stop Receiver .............................. 21
Reset motherboard .................................... 22
Auto set basestation ................................. 22
Static collection .................................... 22
Static data storage .................................. 24
RTK data storage ..................................... 25
U disk data download ................................. 26
Firmware ............................................. 27
Electronic bubble .................................... 28
Electronic bubble calibration ........................ 29
WiFi password setting ................................ 31
Power Supply System .................................. 33
SIM Card/USIM Card ................................... 38
Micro SD card ........................................ 40
Technical parameters ..................................... 42
GNSS Section ......................................... 43
Receiver Accuracy .................................... 43
IV
Interface ............................................ 44
Function keys and indicators ......................... 44
Physical Characteristics ............................. 44
Environment .......................................... 45
Socket and Main Accessories .............................. 46
Preface .............................................. 47
Five-pin socket ...................................... 47
Five-wire ............................................ 48
Mini USB Interface ................................... 49
Mini USB cable ....................................... 49
Antenna Interface .................................... 50
Schedule 2 control panel lights .......................... 51
HI-TARGET
接收机介绍
CHAPTER
Product Introduction
This chapter describes:
■
Preface
■
Product characteristics
■
Cautions for use
Preface
V90Plus is a new type of GNSS receiver used for measurement pushed
forward
by
Hi-Target
Brand,used
new
design,Magnesium
alloy
construction,Linux3.2.0 operating system,Combined gravitational acceleration
sensor, WiFi connectivity, it is a realization of lightweight, intelligent, easy to
use measurement GNSS receiver.
Warning: 1、V90Plus receiver best to use 3G SIM card, if you
still use 2G SIM card to work, affect instrument
performance or operating units caused economic losses, the
company will not be responsible!
2、the instruction represents no standard configuration. The
articles within the box can be adjusted according to different
user requirements. The specific configuration shall be subject
to the outgoing list upon purchasing. The suggestions before
using the machine: check whether the product package is
damaged; please open the package carefully and confirm
whether the articles are consistent with outgoing list; in case
of loss or damage in the product and its accessories, please
immediately contact with local office or dealers; please
carefully read the operating instruction before carrying,
transporting and using the product.
HI-TARGET
接收机介绍
Product Characteristics
◇ A new generation of small intelligent BDS RTK，equipped with top
drive core，provided intelligent mapping of the overall solution;
◇ Using multi-satellite and multi-frequency GNSS units，Support BDS,
GPS, GLONASS.
◇ Equipped with CotexA8 platform、mass storage (16GB + SD card);
◇ With WiFi / 3G connectivity, to achieve long-distance transmission of
data;
◇ Gravity acceleration sensor (electronic bubble);
◇ Equipped with iHand20 intelligent hand held;
◇ Designed for the Android development of customized smart metering
software--Hi-Survey；
◇ A key Multifunction；
◇ New look，Magnesium alloy structure，more solid；
◇ Static data Dual Format storage（*.GNS / RINEX data）。
Cautions for Use
V90 Plus receiver used Chemical resistance and impact resistance
design ， but we also need sophisticated instruments careful use and
maintenance.
Warning:
the receiver shall be in stipulated temperature range
upon using and storage. The detailed requirements are
shown
in
Environment.
Chapter
V:
Technical
Parameters
—>
In order to guarantee the quality of continuous tracking
observation and satellite signals, it is required that the
overhead observation station shall be open, without flaky
barriers above 15° elevating angle; in order to diminish the
interference of electromagnetic wave to GNSS satellite signals,
the observation station shall be free form strong
electromagnetic wave within the range of 200m, such as
television tower, microware station and high-voltage
transmission line; in order to avoid or reduce multipath effect,
the observation station shall be far away from the terrain and
ground features with strong reflection against electromagnetic
wave signal, such as high-rise buildings, waters, etc.
HI-TARGET
接收机介绍
CHAPTER
Introductions to Receiver
This chapter describes:
■
Receiver appearance
■
Control panel
■ Upper cover
■
Bottom cover
■
Batteries
■
Environmental requirements
■
Electronic jamming
10
Receiver Appearance
The product appearance is divided into three sections，upper
cover, bottom cover and control panel.
upper cover
bottom cover
control panel
Figure 2-1
Control Panel
V90Plus middle frame for the control panel of the receiver, the control panel
includes a power switch button, a button to include all the features of V90Plus
receiver set. Three indicators, namely satellite lights, power light (bi-color
light), light (bi-color light).
control panel
Figure 2-2
HI-TARGET
接收机介绍
Satellite light (green light)
status light (red and green light)
power light (red and green light)
Power Button Functions: Startup,shutdown,operating mode switching, the
mode switching confirmation status query, automatically set the base station,
forced shutdown, reset the board and so on.
Upper Cover
U-Loss Prevention boss
Figure 2-3
◇ U-Loss Prevention boss:U-boss can effective anti-wear;
◇ Color mode: appearance of the structure, Clear ,beautiful, drop
Bottom Cover
Including battery compartment, five-pin socket, speaker, Mini USB
interface.
12
8
1- Screw connection 2- speaker 3-USB interface and protective plug 4-GPRS/
Antenna Interface 5- Five-pin plug socket and protection 6- Battery compartment 7SD card slot 8-SIM card slot 9- Battery Cover 10-SLC Power Block.
Figure 2-4
◇ connection screw: for the instrument fixed to the base or the pole.
◇ Trumpet: Real-time operation and status of the instrument voice
broadcast.
◇ USB interface: For connection to the host and external devices,
upgrade firmware and download the static data, can also be used as USB to
serial port using a special mode of operation (need to install drivers).
◇ 3G / GPRS
internal radio antenna connection: Connect 3G / GPRS
antenna using the network, then the built-in UHF radio antenna when using the
radio.
HI-TARGET
接收机介绍
◇ Five-pin socket: For connection to the host and external data links
and external power source.
◇ battery compartment: for housing lithium batteries.
◇ SD card slot: SD card for housing, can store large-capacity static data.
◇ SIM card slot: for receiving USIM / SIM card for data link
communications and remote control.
◇ Battery cover: battery cover can dust and water, batteries and a host of
spare parts have protection role.
◇ SLC power base: lithium is used to connect with the host.
◇ Protective plug: socket for dust and waterproof.
Note: 1. If it is unnecessary to use five-core socket,
eight-core socket and difference antenna
interface, please cover the rubber plug to
prevent dust.
2. In case of inflowing, the trumpet may be
silent or hoarse, which will recover
normally after drying.
Batteries
14
Close
Open
Figure 2-5
Positive pole
Negative pole
Figure 2-6
Environmental Requirements
The receiver shall operate in dry working environment regardless of
waterproof materials. In order to advance the stability and service cycle of
receiver, the receiver shall be prevented from extreme environment, such as:
◇ Moisture
◇ Temperatures above 65 degrees centigrade
◇ Below - 40 degrees centigrade
◇ Corrosive liquids or gases
HI-TARGET
接收机介绍
Electronic Jamming
The receiver shall not be installed in the place near to strong electric power
and interference signal, such as:
◇ Oil duct (spark plugs)
◇ Generator
◇ Battery-operated motor cycle
◇ DC-AC power supply changeover equipment
◇ Signal transmitting station (tower)
◇ Power supply
16
CHAPTER
Elementary Operation
This chapter describes:
■
Control panel
■
Function Key
■
Status Inquiry
■
LED Function
■
Start and stop receiver
■
Reset Motherboard
■
Automatic setting station
■
Static collection
■
Static data storage
■
RTK data storage
HI-TARGET
■
U disk data download
■
Firmware
■
Electronic bubble
■
Electronic bubble calibration
■
WiFi password settings
■
Power Supply System
■
Radio frequency settings
■
SIM card / USIM card
■
Micro SD Card
18
Control panel
Most settings and operations of receiver are completed using two keys on
control panel.
Power light
Satellite light
Status light
Figure 3-1
Function Key
Table 3.1 Description of keys operation time
Operation name
on
Note
Shutdown state, long press the button one
second boot
off
Boot mode, three seconds ≤ pressing the
button≤6 seconds, talking the first "buzz",
release the button, normal shutdown
Automatic
station
setting
Shutdown mode, press the button six seconds
long, broadcast "is automatically set base
station", release the button, the instrument
will automatically set the base station
Operating
switching
mode
Double-click the button to enter the operating
mode switching, double-click each time a
working mode switch
Operating
mode
switching
confirmation
In operating mode switching process, click
the button to confirm
HI-TARGET
Status Inquiry
See Schedule
Reset Motherboard
The boot state, long press the button more
than 6 seconds, voice reporting second sound
"ding dong", release the button, reset
motherboard
Forced shutdown
The boot state, long press the button more
than 8 seconds, forced shutdown
Status Inquiry
Working status
Table 3.2 Key Functions
Broadcast content
GSM base
GSM base
External base
External base
WiFi base
WiFi base
GSM rover
GSM rover
External rover
External rover
Static
Static collection interval X，Elevation angle X，
Remaining storage is X，Satellites number X
LED Function
Different settings mode indicator displays the status of different, see
Appendix 3: Control panel lights.
Operating
Power Light
(Yellow)
Power Light
(Red)
20
Table 3.3 LED Function Description
Meaning
Long-term
lighting
Normal voltage: the battery> 7.6V, foreign> 12.6V
Long-term
lighting
Normal voltage: 7.1V 99.9%
◇ 1Hz、2Hz、5Hz、10Hz、20Hz 和 50Hz Position output (default 1Hz)
◇ Difference Scheme Support：sCMRx、CMR、CMR+、RTCM 2.1、
2.2、2.3、3.0、3.1、3.2
◇ Navigation output format Support：ASCII：NMEA-0183 GSV、AVR、
RMC、HDT、VGK、VHD、ROT、GGK、GGA、GSA、ZDA、VTG、
GST、PJT、PJK、BPQ、GLL、GRS、GBS
Receiver Accuracy
◇ Static, rapid static accuracy： Plane：±(2.5＋1×10-6D) mm
Height：±(5＋1×10-6D) mm
◇ RTK positioning accuracy：Plane：±(8＋1×10-6D) mm
HI-TARGET
Height：±(15＋1×10-6D) mm
Interface
◇ 1 x RS232 serial interface
◇ 1 x Mini USB interface
◇ 1 x SIM card interface
◇ 1 x SD card interface
◇ 1 x 3G / GPRS antenna interface
◇ 1 xBluetooth interface
◇ 1 x WiFi Interface
◇ 1 x Built-in lithium battery Interface
◇ 1 xFifth pin interface
Function keys and indicators
◇ 1 panels buttons: a power button on the receiver can be flexibly
various settings, and a sound, light work with
◇ 3 LEDs: a satellite LED (monochrome), a status light (color), a power
indicator light (color)
Physical Characteristics
◇ Core control chip CotexA8, built-in 16GB Flash memory
◇ Gravity acceleration sensor (electronic bubble)
◇ Volume:φ153mm×h83mm
44
◇ Weight: 1.0kg (without lithium battery)
◇ Anti-2 m natural drop, anti-two meters underwater temporary
immersion.
◇ Built-in 5000mAh high-capacity lithium-ion battery. Voltage: 7.4V, a
new battery continuous working time: 12 hours static, GPRS mode 9 hours,
2W station transmitting 7 hours.
◇ Can be an external DC power supply, wide input range 6 ~ 28V,
internal and external power supply automatically switches
Host Power (static mode): ≤3.5W
Environment
◇ Protection class：IP67
◇ Working temperature: -40 ℃ ~ 65 ℃, Storage temperature:-40℃～
75℃
附表 1 出产默认频率表
CHAPTER
Socket
and
Accessories
This chapter describes:
■
Preface
■
Five-pin socket
■
Five-wire
■
Mini USB interface
■
Mini USB wire
■
Antenna Interface
■
Antenna
46
Main
Preface
The chapter will introduce the appearance and application of main interface of
receiver and accessories. The following equipment does not represent all users
purchased V90 Plus. According to different configurations, the specific
configuration shall be subject to the delivery order upon purchasing.
Five-pin socket
Figure 5-1
Figure 5-2
1,Five-pin socket:Also known as COM2/PW2,normally used to connect the host and
external data link connection, external power source.
Table5.1 five-pin socket Signal Description
Fifth-core signal
GND
GND
Vin
RXD
TXD
附表 1 出产默认频率表
2, All the companies are in circular socket counterclockwise positive start
numbering pin; pin round plugs are numbered starting with welding face
counterclockwise.
3,All the above data (TXD), the (RXD) signals to receivers explained.
TXD transmit data to the receiver signal line, RXD received data to a receiver
line.
4. In addition, the computer serial port DB9 pin connector signals: 2
(RXD computer data reception signal line), 3 (TXD computer data
transmission signal line), 5 (GND signal ground). Referred to as "2 receive 3
rounds."
Note：Above all when facing the host, the host at the bottom of the socket
front icon (ie plug weld surface).
Five-wire
five-pin socket
five-pin socket
图 5-3
Five-wire：V90Plus host and plug for connection to the radio, differential
data transmission;
48
Five-pin socket：For connecting the radio receiver and five-pin plug socket.
Plug the red dot
Socket red dot
Figure 5-4
Mini USB Interface
Mini USB intreface
Figure 5-5
For connection to the host and external devices, upgrade firmware and
download the static data, can also be used as USB to serial port using a special
mode of operation (need to install drivers, see Annex 4).
Mini USB cable
附表 1 出产默认频率表
Standard USB interface
Mini USB interface
Figure 5-6
Mini USB cable, one end is a standard USB connector on one end and Mini
USB interfaces; an external device connected to the host for data
transmission.
Antenna Interface
Antenna Interface
Figure 5-7
3G / GPRS
radio antenna is built using the same antenna interface;
connection 3G / GPRS antenna using the network.
50
Schedule 2 control panel lights
Table 2 control panel lights illustrate
Operating
Meaning
Power light
(yellow)
on
Normal voltage: the battery> 7.6V, foreign> 12.6V
Power light
(red)
on
Normal voltage: 7.1V
Source Exif Data:
File Type : PDF
File Type Extension : pdf
MIME Type : application/pdf
PDF Version : 1.5
Linearized : Yes
Author : Administrator
Create Date : 2015:07:17 10:29:28+08:00
Modify Date : 2015:07:17 10:29:28+08:00
XMP Toolkit : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Producer : Acrobat Distiller 9.0.0 (Windows)
Creator Tool : PScript5.dll Version 5.2.2
Format : application/pdf
Title : Microsoft Word - YFZ-2015-0741 V90Plus 智能RTK系统使用说明书 _英文版_A0.doc
Creator : Administrator
Document ID : uuid:0174904e-14e7-418b-86fb-dcf925e6013e
Instance ID : uuid:4fa4fd59-e44d-4052-abd8-0eb19b1bee4c
Page Count : 57
EXIF Metadata provided by EXIF.tools