High End Systems Technobeam Users Manual TBver20.BK

2015-02-09

• User Manual
  • Trademarks
  • Patents
  • FCC Information
  • Important Safety Information
  • Product Modification Warning
  • Warranty Information
• Table of Contents
  • Table of Figures
  • Table of Tables
• Introduction
  • Features
  • Symbols
  • Document Conventions
  • Contacting High End Systems
• Chapter 1 Preparing to Install Your Fixture
  • Specifications
    • Model Numbers
    • Dimensions (with yoke and handles)
    • Weight (including yoke)
    • Electrical Specifications
    • Technobeam Laser Aiming Device™ (LAD™)
      • LAD Safety Standards
    • Important Power Cord Information - U.K. Only
      • Vigtig Sikkerhedsinformation - DANMARK
    • Dichroic, Litho and Effects Specifications
    • Safety Standards
    • Electromagnetic Standards
    • Environmental Specifications
    • DMX Data Cabling
    • Controllers
  • Optional Accessories
  • Unpacking the Fixture
    • Save the Shipping Materials
    • Inspecting the Contents
  • Installing the Power Cord Cap
    • Important Power Cord Cap Information - U.K. Only
    • VIGTIG FIKKER HEDS INFORMATION - DANMARK
  • Installing the Yoke
  • Setting the Fixture Voltage
  • Setting the Beam Angle
• Chapter 2 Setting Up Your Fixture
  • Powering On the Fixture
    • Homing the Fixture
    • LED Display
    • Status LEDs
  • Overview of Controller Operation
    • What is DMX 512 Protocol?
    • What Kind of Cabling Should You Use?
      • Constructing Cabling
      • Terminators
    • Setting up the Link
  • Linking the Fixtures to the Controller
  • Mounting the Fixture
    • Standing the Fixture on its End Handles
    • Mounting the Fixture on a Truss or Other Support System
    • Hanging the Fixture Straight Down
  • Configuring the Fixture
    • Fixture Types
    • Selecting a Control Method
      • DMX Start Channel Control Method
      • Fixture Number Control Method
    • Assigning a Fixture Address
      • Channel Range
      • Determining the Unique DMX Start Channel
      • Determining the Unique Fixture Number
      • Wasted DMX Channels
  • Upgrading Software
    • Crossloading Software
  • Troubleshooting
    • Troubleshooting DMX Data
    • Menu Error Messages
      • Addr Lost
      • Boot Diff
      • EMEM Ack
      • EMEM [message]
      • Erse Flsh
      • ID Lost
      • Lamp
      • Link Busy
      • Link Empty
      • Over Temp
      • PRST Lost
      • PGRM Time
      • Shut Down
• Chapter 3 Using the Menus
  • Menu System Overview
    • Navigation Buttons
    • Accessing the Menu System
  • Menu Map
  • Menu Options
    • Address Menu (ADDR)
    • Set Menu (SET)
      • Setting Factory Defaults (FACT)
      • Swapping Pan and Tilt (SWAP)
      • Inverting Tilt (T/IN)
      • Inverting Pan (P/IN)
      • Changing the Display Output (DSPL)
      • Inverting LED Characters (D/IN)
      • Changing the Control Method (CHNL)
      • Setting the Lamp Warning Message (LMPL)
      • Changing the Lens Setting (LENS)
    • Mode Menu (MODE)
      • Setting the Fixture Type and Protocol (TYPE)
      • Setting the User Type (USER)
      • Copying User Presets (PRST)
      • Copying User Settings (SETT)
      • Copying User Presets and Settings (ALL)
      • Crossloading Fixture Software (XLD)
    • Test Menu (TEST)
      • Homing the Fixture (HOME)
      • Turning the Lamp On or Off (LAMP)
      • Copying the Boot Code (BOOT)
      • Performing Self Tests (SELF)
      • Placing the Fixture in Setup Mode (S/UP)
      • Testing the LED Display (DISP)
    • Information Menu (INFO)
      • Viewing the Logic Board Temperature (TEMP)
      • Viewing the Current Lamp Hours (L/HR)
      • Viewing the Current Fixture Hours (F/HR)
      • Viewing the Number of Current Lamp Strikes (L/ST)
      • Viewing the Current Software Version (VER)
      • Viewing DMX Status and Construct Values (FIXT)
      • Viewing DMX Data for Another Device (DATA)
      • Viewing Sensor Information (SENS)
      • Resetting Fixture Hours (F/RS)
      • Resetting Lamp Hours (L/RS)
    • Preset Menu (PRST)
      • Setting Preset Playback (PLAY)
      • Editing or Creating an On-Board Memory Scene (EDIT)
      • Copying an On-Board Memory Scene (COPY)
      • Capturing a Preset Scene (CAPT)
      • Enabling the Preset Default (DFLT)
• Chapter 4 Preset Programming
  • Programming Overview
    • What is a “Scene”?
    • Stand-alone Operation vs. a Controller
    • Macros
    • Preset Playback Options
    • General Information
      • Subject to Change
      • Enter and Menu Keys
      • MSpeed vs. Fast Changes
      • Selecting Constructs and Values
  • Creating a Scene
    • Orienting and Powering On the Fixture
    • Turning on the Lamp
    • Opening the Shutter
    • Positioning the Mirror
    • Focusing on a Litho
    • Selecting Color Wheel Constructs
    • Selecting a Color Wheel Pause Time
    • Selecting Effects Constructs
    • Refocusing the Fixture
    • Setting a Delay Time
    • Creating Scene 2
    • Playing Back Both Scenes
  • Synchronizing Preset Playback
    • Setting Up the Fixtures
    • Adding Fixtures
  • Capturing Presets
• Chapter 5 Using the Laser Aiming Device™ (LAD™)
  • Safety Precautions
  • Overview
    • Recommended Laser Operation
    • Intended Audience
    • Using the Laser Aiming Device
  • Controlling the Laser
    • Menu Control of the Laser
    • DMX Control of the Laser
  • Troubleshooting
    • Laser gradually loses power
    • Laser is out of position
    • Emission Indicator LED OFF, Laser OFF
    • Emission Indicator LED ON, Laser OFF
    • Laser ON, Emission Indicator LED OFF
  • Maintenance
• Chapter 6 Servicing Your Fixture
  • Precautions
  • Replacing Fuses
  • Replacing Wheel Components
    • Specifications
    • Reference Drawing
    • Replacing Dichroics in the Color Wheel
    • Replacing Lithos in the Rotating Litho Wheel
      • Removing a Rotating Litho or Rotating Effect
      • Removing a Static Litho
      • Cleaning the Litho
      • Litho Installation Instructions
      • Replacing a Static Litho
      • Replacing a Rotating Litho or Effect
      • Replacing a Custom Litho
  • Replacing the Lamp
    • Optimizing the Lamp
    • Resetting Lamp Hours
  • Cleaning the Internal Components
    • Opening the Fixture
    • Cleaning the Door Vents
    • Cleaning the Lenses and Mirrors
  • Technobeam Laser Aiming Device™
    • Safety Precautions
    • Live Components
    • Alignment Procedure
• Appendix A DMX Protocols
  • General Information
    • Rounding Conventions
    • 16-Bit Control
    • Macros
    • MSpeed vs. Fast Changes
    • Ramp Open, Snap Shut
    • Forward and Reverse Spins
  • Technobeam® Protocol
  • Technobeam-i™ Protocol
  • MSpeed Movement Times
  • Macro Channel Assignments
  • Fixture Number to DMX Start Channel
• Appendix B Factory-Installed Wheels
  • Technobeam™ Wheels
• Appendix C Important Safety Information
  • English Version
  • Appendice C IMPORTANT: INFORMATIONS DE SÉCURITÉ
  • Anhang C Wichtige Hinweise Für Ihre Sicherheit
  • Appendice C Importanti Informazioni Di Sicurezza
  • Apéndice C Información Importante De Seguridad
  • Vigtig Sikkerhedsinformation - DANMARK