High Flying Electronics Technology HF-LPT200 Embedded WiFi Module User Manual Addendum

Download:
Mirror Download [FCC.gov]
Document ID	2265622
Application ID	ak3ixO86/Z2P2kLcNS79+w==
Document Description	Addendum
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	3.44kB (43007 bits)
Date Submitted	2014-05-13 00:00:00
Date Available	2014-05-13 00:00:00
Creation Date	2014-05-13 23:42:51
Producing Software	LibreOffice 3.5
Document Lastmod	0000-00-00 00:00:00
Document Title	Addendum
Document Creator	Writer
Document Author:	Adam

FCC INFORMATION (additional)
OEM INTEGRATION INSTRUCTIONS:
This device is intended only for OEM integrators under the following conditions:
The module must be installed in the host equipment such that 20 cm is maintained between the antenna
and users, and the transmitter module may not be co-located with any other transmitter or antenna. The
module shall be only used with the internal on-board antenna that has been originally tested and certified
with this module. External antennas are not supported.
As long as these 3 conditions above are met, further transmitter test will not be required. However, the
OEM integrator is still responsible for testing their end-product for any additional compliance requirements
required with this module installed (for example, digital device emissions, PC peripheral requirements,
etc.). The end-product may need Verification testing, Declaration of Conformity testing, a Permissive Class
II Change or new Certification. Please involve a FCC certification specialist in order to determine what will
be exactly applicable for the end-product.
Validity of using the module certification:
In the event that these conditions cannot be met (for example certain laptop configurations or co-location
with another transmitter), then the FCC authorization for this module in combination with the host
equipment is no longer considered valid and the FCC ID of the module cannot be used on the final
product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end product
(including the transmitter) and obtaining a separate FCC authorization. In such cases, please involve a
FCC certification specialist in order to determine if a Permissive Class II Change or new Certification is
required.
Upgrade Firmware:
The software provided for firmware upgrade will not be capable to affect any RF parameters as certified
for the FCC for this module, in order to prevent compliance issues.
End product labeling:
This transmitter module is authorized only for use in device where the antenna may be installed such that
20 cm may be maintained between the antenna and users. The final end product must be labeled in a
visible area with the following:
“Contains FCC ID: AZY-HF-LPT200”.
Information that must be placed in the end user manual:
The OEM integrator has to be aware not to provide information to the end user regarding how to install or
remove this RF module in the user's manual of the end product which integrates this module. The end
user manual shall include all required regulatory information/warning as show in this manual.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Page Count                      : 1
Language                        : en-US
Author                          : Adam
Creator                         : Writer
Producer                        : LibreOffice 3.5
Create Date                     : 2014:05:13 23:42:51+02:00

EXIF Metadata provided by EXIF.tools