Hisense Electric LCDC0029 Part15 Subpart B-LED LCD TV User Manual ES G131517
Hisense Electric Co., Ltd. Part15 Subpart B-LED LCD TV ES G131517
Contents
- 1. W9HLCDC0029_User Manual 1-1
- 2. W9HLCDC0029_User Manual 1-2
- 3. W9HLCDC0029_User Manual 1-3
- 4. W9HLCDC0029_User Manual 2
W9HLCDC0029_User Manual 1-2
—||l||l| Installing Batteries in the Remote Control .......................................... 2 Making Connections ........................................................................................ 3 Turning Your TV On or Off ........... Turning the TV for the First Time. Selecting the Input Source Changing Channels I Volume Shortcuts Instructions ........... To Use the Menu ............ Using the Picture Menu .. Using the Audio Menu ....... Using the Channels Menu. Using the Settings Menu Using the Parental Controls Menu ................... Digital Media Players Enjoy Movie Files . Browse the Photos .. Playable Format List ....................................................................................... 15 Trouble Shooting ............................................................................................ 16 Getting Started Installing Batteries in the Remote Control :- Change the batteries 1. Slide the back cover to open the battery compartment of the remote control. 2. Insert two AAA size batteries Make sure to match the (+) and ( - ) ends of the batteries with the (+) and ( - ) ends indicated in the battery compartment. 3. Close the battery compartment cover. The remote control requires: 0 Gently push and slide 0 Insert the batteries 9 Gently push and slide ' Number of Batteries: 2 o Type: AAA 0 Voltage: 1,5Vcc Dispose of your batteries in a designated disposal area. Do not throw the batteries into a fire. Do not mix battery types or combine used batteries with new ones. Remove depleted batteries immediately to prevent battery acid from leaking into the battery compartment. It you do not intend to use the remote control for a long time. remove the batteries. Batteries should not be exposed to excessive heat, such as sunshine, heat registers, or fire. 9’9".“9’Nr‘ Battery chemicals can cause a rash. If the batteries leak, clean the battery compartment with a cloth. Ii chemicals touch your skin, wash immediately. 7. Do not mix old and new batteries. 8. Do not mix alkaline, standard (carbon»zinc) or rechargeable (ni-cad, ni»mh, etc.) batteries. Program Your Universal Cable or Satellite Remote Control to Operate Your New Hisense Television! If you would like to program your other household remote controls to your new Hisense television,please consult the User's Manual supplied by your Cable or Satellite provider. The Cable or Satellite providers' User‘s Manuals should include instructions on how to program their remote to your television, Below is a list of Hisense codes for the most common Cable and Satellite providers. Use the Hisense code that is associated with your Cable or Satellite provider (ii applicable). DIRECTV ............. .....,..01780r10019 Time Warner Cable ................ 386 or 0178 Comcast... ..... 0178 or 10178 Cox Communications ...... ,.0178 Dish Network AT&T U-verse 346 If the Hisense code associated with your Cable or Satellite provider is not listed above,if the code above does not work, or it you cannot locate the instructions for programming your household remote to your television,ca|| your local Cable or Satellite provider’s customer service center. :- The effective range of remote control 1. The remote control distance: 315 inches in front of the TV set. 2. The remote control angle: taking the television infrared light receiver window as an apex, 236 inches away, its controlled angle (left to right) is within 30 degrees, while the vertical angle (up to down) is within 30 degrees. Gett ng Started Making connections I Check the jacks for position and type before making any connections. Loose connections can result in image or color problems. Make sure that all connections are tight and secure. 0 Not all AN devices have the ability to connect to a TV' please refer to the user manual oi your A/V device for compatibility and connections procedure. I Always unplug the power cord when connecting external equipment. :- Connecting an antenna, cable or cable/satellite box 1. Turn off the TV belore connecting the antenna. 24 Connect one end of a coaxial cable (not included) to the RF OUTjack on the antenna, cable or cable/satellite box. If you are using an antenna with twin-lead cable, you may need a 300-75 ohm adapter (not provided) to connect it to the back of your TV. Likewise, if you are using several antennas, you may need a combiner (not provided). 3. Connect the other end of the cable to the ANT/CABLE jack on the side of your TV. TV JACK EXTERNAL DEVICES VHF/UHF Antenna :- Connecting an AN Device with Composite Cable 1, Use the audio and video cables to connect the external A/V device's composite video/audio jacks to the TVs jacks. (Video = yellow, Audio Left = white, and Audio Right = red) 2. Plug the connected devices into the mains socket before switching on the TV. 34 Select the corresponding source from the TV. EXTERNAL DEVICES White(L) AV Cable While(L) (not included) Vellowwideo) Velloledeo) mm. m Equipment wnh AN lam Gett ng Started :- Connecting an AIV Device with Component (YPBPR) Cable 1. Use a component cable to connect the external AN device's component output jacks to the TVs YPEPR jacks. Use an audio cable to connect the external A/V device's component audio jacks to the TVs AUDIO (LIRijacks. 2. Plug the connected devices into the mains socket before switching on the TV. 3. Select the corresponding source from the TV. EXTERNAL DEVICES TV JACK Rod R Red R White L Audio Cable (not included) White L PR/CR cnnpmnv Equipment with AN jacks :- Connecting an AIV Device with HDMI Cable I Support digital connections between HDMI — enabled AN devices such as PVR, DVD. BIu—ray, EXTERNAL DEVICES AV receiver and digital devices. TV JACK 0 some devices such as F'VR or DVD player require HDM‘ c M f I a e = HDMIsignaltobesettooutputin the device's settings. § H WWI-Wm“, 0 Please consult your device user manual for x instructions. (not included) 1. Use an HDMI cable to connect the AN device's HDMI outputjack to the TVs HDMI jack. 2. Plug the connected devices into the mains socket before switching on the TV . 3. Select the corresponding source from the TV. The HDMI connector provides both video and audio signals. it's not necessary to connect the audio cable. Equlpment with HDMl jacks :- Connecting an MHL-enabled device You can connect an MHL-enabled device, such as a cell phone or TV JACK Roku Streaming Stick”. and view your devices screen on the TV. 1. Connect one end of an HDMI-to-MHL cable to the micro USB l:- HcM Mlebl- port on the device. (no lncumd) 2. Connect the other end of the cable to the HDMI / MHLjack. 3. Select the corresponding source from the TV. This feature may not be available, depending on your TV series. :- Connecting a headphone ' TV JACK EXTERNAL DEVICES Headphones can be connected to the O/AUDIO OUT output mm on your set. (While the headphone is connected, the sound 0W0 from the built-in speakers will be disabled.) Gett ng Started :- Connecting a PC with VGA Cable 1. Use a VGA cable to connect the PC's VGA output jack to the TV's VGA jack. Use an audio cable to connect the PC's audio output jack to TV's PC/DVI AUDIO IN jack. 2. Plug the connected devices into the mains socket betore switching on the TV. 3. Select the corresponding source from the TV. EXTERNAL DEVICES VGA Cable (not included) Audio Cable (not included) O Primarily this unit is intended for use as an LCD TV. If you want to use it as a monitor, please contact the manufacturer ot the PC Video/Graphic's card tor turther support. Perfect compatibility is not warranted. I The VGA cable will not supplied with the product. 0 We strongly recommend to use VGA cable with 2 cores as shown in the figure. 0 There may be no VGA port depending on your TV size and series. :- Connecting an Audio Receiver with Audio cable 1. Use an audio cable to connect the A/V device's digital audio in jack to the TV's DIGITAL OUTPUTjack. Or use an RCA Y-cable (1/8"-stereo mini to L/R phono - not provided) to connect analog sound system to the TV's o/Auolo OUT jack. 2. Plug the connected devices into the mains socket beiore switching on the TV. 3. Select the corresponding source from the TV. TV. JACKS EXTERNAL DEVICES Audio Cable (not included) Red R Audio Cable [not included) White L I When a dlgital audio system is connected to the DIGITAL AUDIO OUT (Optical) jack, decrease the volume oi both the TV and the system. 0 51 CH (channel) audio is available when the TV is connected to an external device supporting 5.1 CH. I When the receiver (home theater) is set to on. you can hear sound output from the TV's digital audio out jack. When the TV is receiving 3 DTV signal, the TV will send 5.1 CH sound to the home theater receiver. When the source is connected to the TV via HDMI, only 2 CH audio will be heard from the home theater receiver. It you want to hear 5.1 CH audio, connect the digital audio outjack from your DVD/Blu»ray player/cable box/8TB satellite receiver directly to an amplifier or home theater. Turnlng YOU I' TV on or Off r If Auto selected. the options of Year/Montthay/Tirne are not available. To turn yourTV on or 0“ (standby mode): r Setting the Time: Press [4w] to select the number you 1 Plug the power cord into an AC power outlet. want to set and press [A/V] to set. 2. Press [POWER] button YourTVturns 0" 4. Press [A/V] to select your Picture Mode: Home Mode or 3, Press [POWER] button again to turn off your TV When Retail Mode, press [ENTER] button to Confirm. you turn off your TV, it goes into standby mode (D WARNING When your TV is in standby mode. it is still receiving Retail Mode power. To completely disconnect ”we“ unplug the power Hum”... wimp" 4m» ”marriaimnrri i» COFd- Mm . m imam . . . «in ratanerOn B NOTE - , If your TV does not receive an input signal for several " minutes, lI automatically 9°95 ”“0 SI3"“ij mode. If you select Retail Mode, a message appears “Are you . . . sure you want retail mode?" Select “Yes" to continue, or Tl] mlng the TV on for the FIrSt Tlme select “No" to change your selection. . . 5 Press [A/V] to select your TV Source' Antenna or Cable, The Setup Wizard menu appears the first time you turn press [ENTER] button to confirm, on the TV. It Will assist you to specily the menu language, Picture Mode, TV Source and Channel Installation IMPORTANT: Make sure that the antenna or cable is connected. 1. Make sure that you have: Installed batteries into the remote Control Connected an antenna or cable Connected the power cord, 2» come“ your TV'5 power cord ID a power outlet, Ihe" " Then your TV automatically starts Channel lnstallation press power. The initial setup screen opens. Press [A/V] button to select your language, press [ENTER] button to confirm available in your Viewmg area. u Analog Lhannels an m niDltrt. ‘ Depending on the reception condition, it may take several 3, Press [A/V] to select your options and press [>] to minutes to scan channels. Please allow the process to set the options, complete without interruption, f It you press [EXIT] to exit the scanning, a message appears “Please Run Channel Auto Scan", you should scan channels from the menu of Channels Bast . ures Selecting the Input Source The first time you turn on your TV, you must select the TV signal source. YourTV stores this information, so you do not need to change the TV signal source unless it changes. For example, you change from an outside antenna to cable TV. To select the video input source: 1. Turn on your TV, then press [INPUT] button on the remote or on the TV. The Input source menu opens. 2. Press [A/V] button to highlight the input source, then press [ENTER] button. Changing Channels l Volume 1. Press the [CH NV] (or [CH +/,]) on the TV/remote control to change the channel 2. Press the [VOL NV] (or [VOL +/-]) on the TV/remole control to adlust the volume. 3. Press the numeric buttons on the remote control to display the corresponding channels. i? NOTE Changing the channels can also be achieved by directly entering the channel number using the numeric keys on the remote control. If you are entering a two or three digit channel number, the time between key presses should be less than 3 seconds Shortcuts Instructions Aspect - Select the screen aspect ratio from Normal, Wide, Auto, Zoom, Cinema and 1.1 PIXEL MAP. Normal: The original 4:3 aspect ratio (1.33:1 signal) is preserved, O 0 so black bars are added to the left 0 and right of the image. Standard TV 0 broadcasts are displayed with a 4:3 aspect ratio. Wide: When watching a standard broadcast or fullrframe movie in this mode, the display image is O O stretched proportionately to fill the TV screen When watching a widescreen (1.78:1 signal) program or movie, the display image fills the TV screen. Auto: Automatically adlusts the image based on the screen size and the TV program. Zoom: Stretch the 4 3 aspect ratio image vertically and horizontally to fill the screen at 1:1 78 aspect ratio. cinema: Stretch the 4.3 aspect ratio image vertically and horizontally to fill the screen at 1.2 35 aspect ratio. 1:1 PIXEL MAP(VGA and HDMI(RGB) only): Detect the resolution of the signal and display an image with the same number of pixels. i? NOTE The aspect ratio varies with different sources. Picture - Press to set the picture mode. It can be set as Vivid, Standard, Theater, Energy SaVings or Custom. This mode achieves a certain image display effect by setting the brightness, contrast and color etc Sound - Press to set the sound mode. lt can be set as Standard. Theater. Music, Speech and Custom. Mute - Press to turn the sound off, press this button again to turn the sound back on. This lunction is used to switch off sound temporarily Sleep - It can set the TV to let it enter into the Standby slate automatically. Press this button repeatedly to select the proper sleeping clock mode. and the clock tells you the remaining time before the TV enters Standby state. Display - Display the information banner The information including channel number, channel name, current system time, tuner mode, audio stream, Video format, audio language, closed caption mode, parental locks rated, program details, etc. To Use the Menu Press [MENU] to open the main menu. Press [A/V] to select a menu option. then press [VI ENTER] button to enterthe menu. in each menu, you can' Press [A/V] to select an item. Press [>] to ad]ust the value. or Press [VIENTER] to enter the submenu. Press [MENU] to back the previous menu. 4 Press [EXIT] to exit the menu. B NOTE Standard 0 —i I— an _l l— 50 Color —i I— so Tint _l l— i] —l l— 50 The menus in the user manual may vary slightly from the actual screen. Using the Picture Menu Pirture Mode Brightness Contrast Com, _i i— 50 Standard 4} _] l— 50 —l l— 50 ‘fint —i l— D Sharpne Advanced Video P “re Settings _] l— 50 You can adjust: Picture Mode - Ad]ust the Picture Mode. You can select ViVld‘ Standard, Theater, Energy Savings or Custom. Brightness - increase or decrease the brightness of the picture Increasing the brightness can add more light to dark areas of the picture, while decreasing the brightness can add more darkness to light areas of the picture. Contrast - Increase or decrease the contrast of the picture. Increase the contrast to ad]ust the white areas of the picture or decrease the contrast to adjust the black areas of the picture Color - Adjusts the color intensity of the picture. A low setting may make the color look faded A high setting may make the color look artificial Tint - Ad]usts the color balance of the picture Use this control to make skin tones look more natural Sharpness - You can increase the sharpness level for clearer images or decrease the sharpness level for smoother images. Advanced Video - Access advanced video settings such as Backlight, Color Temperature and Noise Reduction. Dynamic Backlight Control: Enhances the contrast ratio between light and dark areas of the picture. You can select Off, Low, or High Backlight: Sets the overall brilliance of the screen, When the option of Dynamic Backlight Control is turned Low or High, you cannot change the Back Light setting, Aspect Ratio: To choose the screen aspect ration from Wide, Cinema,Auto, Normal, 1:1 PIXEL MAP and Zoom. 3 NOTE The option of the screen Aspect Ration is different in different inputs. (For more information, see “Shortcuts instructions") Color Temperature: Change the color temperature. You can select the color temperature from three options: Cool, Normal or Warm. Overscan: Ad]usts the picture's reproduction rate, You can select On or Off. 3 NOTE Only available in DTV. Component and HDMItVUV) source. Noise Reduction: Select to reduce the neise level of connected equipment off, Low, Medium and High Adaptive Contrast: Automatically ad]usts picture detail and brightness. You can select On or Off. 120Hz Effect: Inserts frames to reduce judder in fast action scenes You can select On or Off. B NOTE Only available in the models that support 120 Hz. Reset Picture Settings - Resets all Picture Settings to the factory defaults
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes XMP Toolkit : 3.1-701 Modify Date : 2014:04:23 15:57:13+08:00 Create Date : 2014:04:23 15:57:03+08:00 Metadata Date : 2014:04:23 15:57:13+08:00 Creator Tool : CorelDRAW Version 9.397 Format : application/pdf Title : ES-G131517Ó¢ÎÄ Creator : ΢ÈíÓû§ Document ID : uuid:e3768704-27a3-4eda-b14d-9f7ac055739f Instance ID : uuid:27297d9d-b7ad-4b6b-9a17-a1ef0bb05a6a Producer : Corel PDF Engine Version 9.397 Page Count : 8 Author : ΢ÈíÓû§EXIF Metadata provided by EXIF.tools