Hisense Electric LCDC0042 LED LCD TV User Manual

Hisense Electric Co., Ltd. LED LCD TV

User Manual

For usage in Mexico , operation of this equipment issubject to the following two conditions : 1 ) it is posiblethat this device doesn’t cause any detrimental interferenceand 2 ) this device must take any kind of interference ,including that which may cause its malfunctioning.NOTE
EnglishES-G164776
Copyright Statement© 2017 Hisense Company Ltd. All Rights Reserved.All material in this User Manual is the property of Hisense Company Ltd. and its subsidiaries, and is protected under US, CANADA, MEXICO and International copyright and/or other intellectual property laws. Reproduction or transmission of the materials, in whole or in part, in any manner, electronic, print, or otherwise, without the prior written consent of Hisense Company Ltd. is a violation of Hisense Company Ltd. rights under the aforementioned laws.No part of this publication may be stored, reproduced, transmitted or distributed, in whole or in part, in any manner, electronic or otherwise, whether or not for a charge or other or no consideration, without the prior written permission of Hisense Company Ltd.Requests for permission to store, reproduce, transmit or distribute materials may be made to one of the following addresses:USA: Hisense USA Corporation PO Box 3289 Suwanee, GA 30024CANADA: Hisense Canada Co., Ltd, 2283 Argentia Road, Unit 16 Mississauga, ON, Canada, L5N 5Z2MEXICO: Hisense Mexico S. de R.L. de C.V. Blvd. Miguel de Cervantes Saavedra No 301 Torre Norte Piso 2, Col. Ampliación Granada Hisense, and any and all other Hisense product names, logo’s, slogans or marks are registered trademarks of Hisense Company Ltd. and its subsidiaries. All other trademarks are the property of their respective holders. Miguel Hidalgo, Ciudad de México, C.P. 11520
Disclaimer Page**Notwithstanding anything to the contrary, including in any or all descriptions, representations, statements or other communications related to this Hisense device (hereinafter “Device”) made in any form whatsoever and at any time, some or all of the pre-installed, or subsequently installed Application Services may not be available or capable of functioning as intended by the provider of the Application Services in any or all usage areas for reasons outside of Hisense’s control, including but not limited to, Internet access, local service limitations, etc. Any purchase or use of the Device, including any Application Services, is purely at the user’s risk. Application Services are provided on an as-available basis without warranties of any kind, either expressed or implied, that the Application Service will be uninterrupted or error-free, including but not limited to vagaries of weather, disruption of Service, acts of God, warranties of title, local or regional limitations, no infringement, NOR IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. No advice or information given by Hisense, providers, affiliates, or contractors or their respective employees shall create such a warranty. Hisense specifically disclaims responsibility for any or all Application Services from functioning at any time, and by purchasing the Device, you accept such disclaimer without any claim on Hisense. You are solely responsible for providing an active and working connection to the Internet, along with any and all hardware and/or software necessary to use the Hisense Device as intended.Disclaimer: Images throughout this document are for illustrative purposes only and may differ from the actual product.
1Table of ContentsConnecting Devices to your TV ..............................................................................3Connecting an antenna, cable set-top box or satellite receiver ...........................................3Connecting an AV device with a composite video cable ......................................................3Connecting an AV device with a component video cable ....................................................4Connecting an AV device with an HDMI cable .....................................................................4Connecting headphones ...................................................................................................... 5Connecting speakers (or other audio receivers) .................................................................5Connecting a digital sound bar to use ARC (Audio Return Channel) ..................................6Connecting Your TV to a Wired or Wireless Network .............................................7Connecting to a Wireless network .......................................................................................7Connecting to a Wired (Ethernet) network ...........................................................................7Using Your TV Remote Control .................................................................................9Completing the First-Time Setup Menu ..................................................................11Basic and Advanced TV Settings ...........................................................................13Accessing the Quick Setup Menu ...................................................................................... 13Picture Menu ......................................................................................................................13Sound Menu ......................................................................................................................14Channel Menu ...................................................................................................................14 Network Menu ...................................................................................................................14System Menu .....................................................................................................................15About TV Menu ................................................................................................................. 16Parental Controls .....................................................................................................17
2Table of ContentsGetting familiar with the Home screen ...................................................................19Live TV .....................................................................................................................20Viewing channel information .............................................................................................. 20Viewing a channel list ........................................................................................................20Creating a 'Favorites' list ..................................................................................................20Viewing your ‘Favorites’ list ...............................................................................................20Apps ...........................................................................................................................21Apps ..................................................................................................................................21Customizing the name of your TV .....................................................................................22Media .........................................................................................................................22Panels that appear on the Media screen ...........................................................................22File formats that are supported .......................................................................................... 22Viewing video .....................................................................................................................22Browsing content ...............................................................................................................22Viewing Pictures as a slideshow ........................................................................................ 23Mirroring content from your device to the TV ......................................................23Software updates for your TV ................................................................................24Quick Problem-Solving Tips ....................................................................................25
3Connecting Devices to your TVConnecting an antenna, cable set-top box or satellite receiverTo connect an antenna,cable set-top box or satellite receiver:Connecting an AV device with a composite video cable (yellow/red/white)You have several options for connecting your TV to different devices. The method in which you connect will be based upon the type of cables you have and the available outputs on your device.Connecting Devices to your TV1. Connect one end of a coaxial cable (not included) to the [RF OUT] jack on the antenna, cable or satellite box. If you are using an antenna with twin-lead cable, you may need a 300-75 Ohm adapter (not provided) to connect it to the back of your TV. Likewise, if you are using several antennas, you may need a combiner (not provided).2. Connect the other end of the cable to the [ANT/CABLE] jack on the side of TV.3. Using your remote, press the [INPUT] button and select TV as the input source.To connect an AV device with a composite video cable (not provided):1. Use the audio and video cables to connect the composite video/audio jacks (of the external AV device) to the [AV IN] jacks of the TV. (Video = yellow, Audio Left = white, and Audio Right = red).2. Plug the connected devices into the AV connectors on the TV before switching it on.3. Using your remote, press the [INPUT] button and select AV as the input source.Figure 1. Antenna, cable set-top box or satellite receiver to the TVFigure 2. AV device with a composite video cableor ANT OUTCable Set top boxRF OutEXTERNAL DEVICETV JACKTV JACKANT/CABLE(not included)(not included)(not included)DVD Player/RecorderVideo CameraEXTERNAL DEVICESSet-top boxSatellite ReceiverSatellite antenna cableVCRAV OUTVideoLRWhite(L)White(L)Yellow(Video)Yellow or Green(Video)Red(R)Red(R)Audio Cable VIDEO LRAV IN
4Connecting Devices to your TVYPBPRCOMPONENT INLRDVD Player/RecorderVideo CameraEXTERNAL DEVICESSet-top boxSatellite ReceiverSatellite antenna cableVCRWhite(L) White(L)Red(R) Red(R)Audio Cable Component Cable ComponentRLPRPBYRed(PR/CR) Red(PR/CR)Blue(PB/CB) Blue(PB/CB)Green(Y) Green(Y)HDMIHDMIEXTERNAL DEVICESDVDSet-top BoxHDMI Cable NOTES Because the HDMI connector provides video and audio signals, it is not necessary to connect an audio cable. The HDMI cable will not supplied with the product. We strongly recommend to use HDMI Cable with 2 cores as shown in the figure.NOTEOne AV device can be connected to the TV using a component video or composite video cable.TV JACKTV JACKConnecting an AV device with a component video cable (red/blue/green) To connect an AV device with a component cable (which is red/blue/green):1. Use a component video cable (not provided) to connect the component output jacks of the external device to the YPBPR jacks for the TV. Use an audio cable to connect the component audio jacks of the external device to the TV AUDIO (L/R) jacks.2. Plug the connected devices into the YPBPR and L/R ports on the TV before switching it on.3. Using your remote, press the [INPUT] button and select COMPONENT as the input source.Figure 3. AV device with a component video cableConnecting an AV device with an HDMI cableThis type of connection supports digital connections between HDMI-enabled AV devices such as a Personal Video Recorder (PVR), DVD, Blu-Ray, AV receiver and digital devices. In addition, some devices (such as a PVR or DVD player) require an HDMI signal to be set to Output in the settings of the device.Please refer to the User Manual that came with your device for step-by-step instructions.To connect an AV device with an HDMI cable:1. Use an HDMI cable to connect the [HDMI] output port of the AV device to the [HDMI] jack of the TV.2. Plug the connected devices into the power socket.3. Using your remote, press the [INPUT] button and select the corresponding HDMI input.Figure 4. AV device with an HDMI cable(not included)(not included)
5Connecting Devices to your TV /AUDIO OUTEXTERNAL DEVICESEXTERNAL DEVICESPowerless Bass SpeakerSpeakerAudio AmplierDigital Sound BarDIGITALAUDIO OUT /AUDIO OUTConnecting speakers (or other audio receivers)To connect speakers (or other audio receivers) with an audio cable:Connecting headphones 1. Use an audio cable (not provided) to connect the [DIGITAL AUDIO IN] jack of the audio receiver device to the [DIGITAL AUDIO OUT] jack of the TV. Another option is to use an RCA Y-cable (1/8”-stereo mini to L/R phono) to connect an analog sound system to the [AUDIO OUT] jack of the TV.2. Plug the connected devices into the main power socket before switching on the TV.You can connect headphones to the [AUDIO OUT] port on your TV. While the headphone is connected, the sound from the built-in speakers will be disabled.Figure 5. Headphones to the TVFigure 6. Audio receiver with audio cableTV JACKAudio Cable (not included)TV JACKSWhite(L)Red(R)Audio Cable (not included)Audio Cable (not included)If you prefer to use Audio Return Channel, then follow the steps on the next page under 'Connecting a digital sound bar to use Audio Return Channel'.NOTE When a digital audio system is connected to the [DIGITAL AUDIO OUT] jack, decrease the TV and system volume.  5.1 CH (channel) audio is available when the TV is connected to an external device that supports a 5.1 channel surround sound  You can receive 5.1 channel audio in one of two ways. The first way is to connect the [DIGITAL AUDIO OUT] jack from the device to the Amplifier. The second way is to connect the [DIGITAL AUDIO OUT] jack on the back of the TV to the [Optical] port on the Amplifier. After you’ve completed one of the two methods then be sure to go into the Advanced Audio Settings of the TV and select RAW to receive the 5.1 channel audio. You will need to also go into the sound or audio settings of your device to ensure it is set to 5.1 Channel output. It may read ‘Bitstream’, ‘RAW’ or ‘Digital’.NOTES
6Connecting Devices to your TVConnecting a digital sound bar to use ARC (Audio Return Channel)If you'd like to use the Audio Return Channel (ARC) feature to have sound sent from the TV back down an HDMI cable to a digital soundbar, then you will need to connect the cable to the [HDMI (ARC)] port. By using this feature, you will also be able to control the soundbar with your TV remote instead of having to use multiple remotes for each device. Only digital sound bars that require a wired connection are compatible with the H5 Series Smart TV.To connect a digital sound bar with an HDMI cable:1. Connect the cable that’s attached to the soundbar to the HDMI (ARC) port on the TV.2. Turn on the soundbar by pressing the Power button.3. Press the [Quick Setup menu] button on your remote and go to System > CEC Function4. Turn on the CEC Control setting.5. Select Sound > Advance Audio Settings > TV Speaker & ARC and select ARC First.6. If the device has an ‘Input Selector’ feature then make sure to change it to ‘TV’.EXTERNAL DEVICESDigital Sound BarHDMIFigure 7. Digital Sound Bar to the HDMI (ARC) port TV JACKHDMI Cable (not included)NOTE
7Connecting your TV to a Wired or Wireless NetworkWireless Adapter built-in the TV setLAN CableWireless Router The LAN Port on the WallConnecting Your TV to a Wired or Wireless NetworkConnecting to a Wired (Ethernet) NetworkYou have the option to connect your TV to a wireless or wired network to access the Internet. You can attach your TV to your LAN in one of the three following ways:Option 1. You can attach your TV to your LAN by connecting the LAN port on the back of your TV to an external modem using a Cat 5 LAN cable. See Figure 15. If your access point (AP) supports Wi-Fi Protected Setup (WPS), you can connect to the network via Push Button Configuration (PBC) or PIN (Personal Identification Number). WPS will automatically configure the SSID and WPA key in either mode.Our built-in wireless LAN adapter supports the IEEE 802.11 b/g/n communication protocols and we recommend that you use an IEEE 802.11n router. When you play a video over an IEEEE 802.11 b/g connection, the video may not play smoothly. You must use the Hisense built-in Wireless LAN Adapter to use a wireless network because the set does not support an external USB network adapter. To use a wireless network, your TV must be connected to a wireless IP sharer. If the wireless IP sharer supports Dynamic Host Configuration Protocol (DHCP), your TV can use a DHCP or static IP address to connect to the wireless network. Select a channel for the wireless IP sharer that is not currently being used. If the channel set for the wireless IP sharer is currently being used by another device nearby, this will result in interference and communication failure. If you apply a security system other than the systems listed below, it will not work with the TV. If Pure High-throughput (Greenfield) 802.11N mode is selected and the Encryption type is set to WEP, TKIP or TKIP-AES (WPS2 Mixed) for your Access Point (AP), then the Hisense TV will not support a connection in compliance with these Wi-Fi certification specifications.Figure 8. Connect the TV to a wireless networkFigure 9. Connect a LAN port on the TV to an external modemConnecting to a Wireless Network(not included)NOTESExternal Modem(ADSL / VDSL / Cable TV) Ethernet Cable Modem Cable The Modem Port on the WallLAN Port on TVLAN
8Connecting your TV to a Wired or Wireless Network You can attach your TV to your LAN by connecting the [LAN] port on the back of your TV to an IP Sharer which is connected to an external modem. Use an Ethernet cable for the connection. See figure 16. Depending on how your network is configured, you may be able to attach your TV to your LAN by connecting the [LAN] port on the back of your TV directly to a network wall outlet with an Ethernet cable. See the diagram below. If you have a Dynamic Network, you should use an ADSL modem or router that supports Dynamic Host Configuration Protocol (DHCP). Modems and routers that support DHCP automatically provide the IP address, subnet mask, gateway, and DNS, so you don’t have to enter them manually. Most home networks are Dynamic Networks.Some networks require a Static IP address. If your network requires a Static IP address, you must enter the IP address, subnet mask, gateway, and DNS values manually on your TV’s Cable Setup Screen when you set up the network connection. To get the IP address, subnet mask, gateway and DNS values, contact your Internet Service Provider (ISP).Figure 10. Connect a LAN port on the TV to an IP sharerFigure 11. Connect a LAN port on the TV to a network wall outletYou can use ADSL modems that support DHCP if your network requires a static IP address. ADSL modems that support DHCP also let you use static IP addresses.Option 2Option 3The LAN Port on the Wall LAN Port on TVEthernet CableLANThe Modem Port on the WallModem Cable Ethernet Cable Ethernet CableLAN Port on TVExternal Modem(ADSL / VDSL / Cable TV) IP Sharer (Router)(with DHCP server) LANNOTE
9Using Your TV Remote ControlButtons on your TV remoteVOL CHOKCCBACKTVEXITINPUTMTSNRTPower on / oEnter Channels / input numbersMedia content control function buttonsDash button Select a digital sub-channelD-pad (up/down/left/right navigation buttons)Volume (up / down)Set the audio language(MTS)Choose to leave the Video description feature On or OLive TVReturn to the previous place in the menu or appMute and restore soundInfrared transmitterChange TV input sourceChannel (up / down)Exit the applicationTurn Closed Caption On / OSpecial function buttonsThe button for the Quick setup menuDisplay the Home screenConrm buttonQuick access buttons to apps
10Using Your TV Remote ControlBegin using your remote1. Slide the back cover to open the battery compartment of the remote control.2. Insert two AAA size batteries. Make sure to match the (+) and (-) ends of the batteries with the (+) and ( - ) ends indicated in the battery compartment.3. Replace the battery compartment cover.Important Information about the remote and batteries: Discard batteries in a designated disposal area. Do not throw them into a fire. Remove old batteries immediately to prevent them from leaking into the battery compartment. If you do not intend to use the remote control for a long time, remove the batteries.  Battery chemicals can cause a rash. If the batteries leak, clean the battery compartment with a cloth. If chemicals touch your skin then wash it immediately. Do not mix old and new batteries. Do not mix alkaline, standard (carbon-]inc) or rechargeable (NiCd, NiMH, etc.) batteries. Do not continue using the remote if it gets warm or hot.Call our Support Center immediately on the Hisense support website.Remote Control Range Information The remote control can work at a distance of up to 26 feet in front of the TV set. It can work at a 30 degree horizontal or vertical angle.Program Your Universal Cable or Satellite Remote Control to Operate Your New Hisense Television (only for USA)If you would like to program your other household remote controls to your new Hisense television,please refer to the User's Manual supplied by your Cable or Satellite provider. The Cable or Satellite providers' User's Manuals should include instructions on how to program their remote to your television.A list of Hisense codes for the most common Cable and Satellite providers are listed below. Use the Hisense code that is associated with your Cable or Satellite provider (if applicable).DIRECTV......0178, 10178, 10019, 10748, 11314, 11660, 11710, 11780, 12049, 10171, 11204, 11326, 11517, 11564, 11641, 11963, 12002, 12183Time Warner Cable......386, 0178, 10178, 400, 450, 461, 456, 0748, 1463, 0463, 10463Comcast......0178, 10178, 10463, 11463, 10748, 11314, 11660, 10171, 11204, 11326, 11517, 11641, 11780, 11785, 11892, 11963, 12002Cox Communications......0178, 10178, 1326, 1463Dish Network......505, 627, 538, 720, 659If the Hisense code associated with your Cable or Satellite provider is not listed, does not work or you cannot locate the instructions to program your remote, call your local Cable or Satellite provider’s customer service center.Insert the batteriesGently push and slide Gently push and slideIf your Cable or Satellite provider does not have a Hisense code available, please contact us.Using Your Cable Set-top Box or Satellite Receiver Remote as a ‘Universal’ RemoteIf you prefer to use your Cable Set-top Box or Satellite Receiver Remote as a ‘Universal Remote’, then visit the Support page to view a list of the codes.
11Completing the First-Time Setup MenuNow that you have attached the TV stand and connected your external devices, it's time to complete the first-time setup menu. Completing the First-Time Setup MenuPress the [Power] button on the remote to turn on the TV. A splash screen that shows the Hisense logo appears. Next, the First-Time Setup Menu begins by prompting you to choose your Language, Country, and Time Zone. Screen TaskLanguage and LocationLANGUAGE AND LOCATIONLanguageLanguage ModeTerms Network Input DoneEnglish United States EasternCountry Time Zone1. Using the D-pad arrows of your remote, choose your Language, Country and Time Zone. 2. Next, navigate to the Forward arrow and press OK.TIP: The edge of the drop-down boxes and the back and forward arrows change to blue when you select them.Terms of ServiceTERMS OF SERVICEAccept allAccept EULAAccept Terms of Serv...Language ModeTerms Network Input DoneThe EULA and Terms must be accepted in order to continue.1. Press [OK] on your remote to select Accept all. 2. When you’re done, then navigate to the Forward arrow and press [OK]. TV Usage ModeTV USAGE MODETV ModeHomeLanguageHome ModeIn Home Mode, your TV will automatically adjust the brightness of your screen based on the ambient light in the room. This mode uses less energy.ModeTerms Network Input DoneSelect Home (which appears by default) and then navigate to the Forward arrow to press [OK].NOTE: ‘Store mode’ should only be selected by Retailers who plan to demonstrate the TV.Disclaimer: Images throughout this document are for illustrative purposes only and may differ from the actual product.
12Completing the First-Time Setup MenuScreen TaskNetwork ConnectionNETWORK CONNECTIONLanguage TermsEthernetConnecting EthernetConfigureWiFiMode Network Input DoneIf your TV does not automatically detect an Ethernet connection, then select WiFi. When you’re done, select your network from the list that displays and move to the next screen.Remote Button SetupLanguage Terms Mode Network Input DoneREMOTE BUTTON SETUPTV AVHDMI2HDMI1 HDMI3COMPONENTLiveTVSelect how you receive your TV channels. Choose from one of the following sources below and then move to the next screen. TV AV COMPONENT HDMINOTE: If you use an antenna to receive channels, then you must complete the rst-time setup menu in order to run a channel scan.Congratulations! Your TV is now ready to use.Press [OK] on your remote if you are fine with the selections that appear on the screen. Otherwise, navigate to the back arrow on the screen to change your selection.First-time Setup Menu (continued) CONGRATULATIONS !Your TV is now ready to use TV SelectionsEnglish United States Eastern Home Mode Ethernet TVOKLanguage Terms Mode Network Input Done
13Your Hisense TV comes with many TV setting features to allow you to customize the picture based on your viewing preference and environment. Accessing the Quick Setup MenuYou can press the [Quick Setup menu] button [ ] and press the right arrow on the D-pad to view the full menu settings. The Settings menu consists of the following settings: Picture Sound Channel Network System About TVBasic and Advanced TV SettingsPicture Menu Picture Mode: If you’d like to configure the settings for your picture, then there are six types of picture modes available: Vivid, Standard, Theater, Energy Saving, Game and Sport.Once you choose the mode, you can adjust the picture based on the following settings: Brightness: Adjust the Brightness level to generate lighter or darker images. Contrast: Adjust the Contrast level to increase or decrease how bright images appear. Color: Adjust the color intensity of the picture for a more vibrant image. Aspect Ratio: Adjust the Aspect Ratio to stretch or zoom in on your picture. You can choose from the following settings: Auto, Direct, 1:1 PIXEL MAP, Panoramic, Cinema, Wide, Zoom or Normal. Backlight: This TV has a Dynamic Backlight Control setting that you can turn ‘On’ and set to high or low. The Backlight setting enables you to adjust how bright you want images to appear. In addition, an Eco Sensor setting is available that will enable the TV to automatically adjust the picture settings according to the amount of ambient light in your room. The Minimum Backlight setting enables you to adjust how low you want the backlight to be when you view content in a dark or well-lit room. This is a money-saving feature because it reduces power consumption. Advanced Picture Settings: Adjust advanced picture settings based on your viewing preference. Display: Adjust advanced picture settings in the component source. Overscan: Change the video size settings to slightly crop the edges of the displayed image. Tint: Adjust the colors from a green to magenta tint to view the natural skin tones of people on the screen. Sharpness: Adjust how sharp or soft edges of images appear. Noise Reduction: Improve how clear the picture appears by reducing noise. Film Mode: Improve how clear the picture appears by reducing noise1. Adaptive Contrast: Automatically darken dark areas and lighten light areas of images to see more details. Color Temperature: Select a preset color temperature. White Balance: Adjust the intensity of red, green and blue lights to view the true colors of all images in the picture. Color Tuner: Adjust the Hue, Saturation and Brightness of color settings. Restore Default Picture Settings: Restore all the picture settings in the current picture mode to the factory default values.SettingsPictureSoundChannelNetworkSystemAbout TVPicture ModeStandardBrightness50Contrast50Color50Aspect RatioAutoBacklightAdvanced Picture SettingsRestore Default Picture Settings
14Basic and Advanced TV SettingsSound Menu Sound Mode: Select a preset sound mode to suit the type of content you are listening to: Standard, Theater, Music, Speech and Late Night.Set the sound effects to suit your preference: Configure your audio settings for your sound preferences. Once you choose the mode, you can adjust the audio based on the following settings: Audio Enhancements: dbx-tv’s Total Technology™ delivers the best possible audio experience from your TV.  Total Sonics: Optimizes overall sound quality by increasing bass, making dialog clear and natural, and widening the sound field.  Total Surround: Provides surround sound experience with psycho-acoustic processing to place sounds beside, behind, and above the viewer. For best results use with Total Sonics.  Total Volume: Maintains consistent loudness levels from wide dynamic range programs, too-loud commercials, and channel or input changes. Advanced Audio Settings: Tune the audio settings and quality of the TV. Equali]er: Boost the volume at different frequencies. Lip Sync: Synchronize the displayed image with the audio output. Balance: Adjust the left and right speaker strength to optimize audio for a specific location. Digital Audio Out: Select the digital audio output format that best suits the audio device type. For example, choose RAW (which is uncompressed audio in RAW form) if you have 5.1 Channel Surround Sound Speaker set up. Choose PCM if you have an amplifier that does not support Dolby Digital technology. Digital Audio Delay: Adjust the digital audio output delay time to sync sound from an external speaker with the images on the TV. TV Speaker & ARC: Select the TV speaker or an external speaker for sound output. Audio Out: Change the way audio is sent through the type of device that’s connected to your TV Audio Out port. Restore Default Audio Settings: Restore all of the audio settings in current audio mode to the factory default values.Channel Menu Tuner Mode: Select Tuner Mode if you receive TV channels over the air (antenna) or through a cable set top box. The input will be used during a channel scan. Auto Channel Scan: Automatically scan for channels to view programming from your TV source. Channel Skip: Skip a channel that your TV picked up during a previous channel scan search. Favorites List: Quickly access your most-watched channels by creating a Favorites list.Network Menu Network Configuration: Set up the network to gain full access of Smart TV features. When the Connection Type is Ethernet, means you choose a wired network connection to access the Internet. Ethernet: Display the network connection status. IP Setting Mode: Configure the IP setting for your network connection. When the Connection Type is Wireless, means you choose a wireless network connection to access the Internet. Advanced Settings: Configure the advanced wireless network settings for the TV. Available Networks: Select an available network to connect. And you can also add wireless network or refresh wireless network. When the Connection Type is Off, means you turn off the Internet connection.SettingsPictureSoundChannelNetworkSystemAbout TVSound ModeStandardAudio EnhancementsAdvanced Audio SettingsRestore Default Audio SettingsSettingsPictureSoundChannelNetworkSystemAbout TVTuner ModeAntennaAuto Channel ScanChannel SkipFavorites ListSettingsPictureSoundChannelNetworkSystemAbout TVNetwork CongurationNetwork InformationDisconnectedAnyview StreamOnTV NameSmart TVWake on Wireless NetworkOWake on LANO
15Basic and Advanced TV Settings Network Information: View information about your network connection. Anyview Stream: Share video, music or other content from another device on to your TV screen. TV Name: Choose a name for your TV. The name will be shown to devices that are available for sharing data. Wake on Wireless Network: Using a wireless connection, turn on your TV with a screencast feature inside an app. Wake on LAN: Using an Ethernet connection, turn on your TV with a screencast feature inside an app.System Menu Location: Choose the location from where you will watch your TV. Time: Set the current time based on your location. Time Zone: Select your time zone. Time Format: Set the time to display in a 12 or 24-hour format. Daylight Savings: Select whether to apply Daylight Savings Time to the TV. Date/Time: Set the Date and Time. Power On Timer: Enable the Power On Timer to Off, Once or Daily. Power Off Timer: Enable the Sleep Timer to Off, Once or Daily. Sleep Timer: Set the sleep timer to automatically turn the TV Off within a specified time: Off, 10 Minutes, 20 Minutes, 30 Minutes, 40 Minutes, 50 Minutes, 60 Minutes, 90 Minutes and 120 Minutes. Language: Adjust the default language settings for the TV. Parental Controls: Turn On Parental Controls to block children from being able to view certain programs. The default password is 0000. Locks: Enable or disables all locks. All selected locks can be turned off for parental viewing and easily turned on again. Block Time: Block certain channels and programs during certain periods of time. Channel Block: Block programs by channels when you turn On the Parental Controls feature. Program Block: Block certain programs when your turn On the Parental Controls feature. Input Block : Block content from devices that are connected to certain TV ports. App Block :  Change PIN: Change your PIN that you use to access Parental Controls. If you want to change your parental control password, first enter the new password then enter the same password again.NOTEIf you forget your password, call the Hisense Consumer Electronics Care Center. Restore Parental Control Defaults: Restore Parental Control back to the factory default setting. Application Settings: Set settings for apps on your TV. Netflix : Remove this TV from your Netflix account. Please contact Netflix if you want to stop being billed for you service. ESN : Display the Netflix Electronic Serial Number. VUDU : Remove this TV from your VUDU account. Please contact VUDU if you want to stop being billed for you service. Accessibility:  Menu Audio : Choose to leave the Audio Menu Prompts On or Off. Video Description: Choose to leave the video description feature On or Off. High Contrast Menu : Choose to leave the high contrast menu On or Off. Menu Audio Settings: Adjust settings for the Menu Audio function. Closed Caption: Adjust Closed Captioning settings. Caption Control: Select an Caption Control setting from CC On, CC Off, CC On When Mute. Analog Caption: Select an Analog Caption setting from Off, CC1-CC4, Text 1-TEXT4. CC1-CC4: Closed captioning appears in a small banner across the bottom of the screen. CC1 is usually the “printed” version of the audio. CC2-CC4 display content are provided by the broadcaster. Text1-Text4: Closed captioning that covers half or all of the screen. Text1-Text4 display content are provided by the broadcaster.SettingsPictureSoundChannelNetworkSystemAbout TVLocationUSATimeLanguageParental ControlsApplication SettingsAccessibilityClosed CaptionCEC FunctionAdvanced Settings
16Basic and Advanced TV Settings Off: To turn off the Analog Caption. Digital Caption: Select a Digital Caption setting: Off,CS1-CS6. Digital CC Settings: There are two Caption Styles. One is the Automatic function set as the broadcaster, while the other is the Custom style where you can adjust the font Size, Font, Text Color, Text Opacity, Background Color etc. CEC Function: Configure how to control CEC-enabled devices with your TV remote. CEC Control: Allow HDMI devices to control each other.  Device Auto Power Off: Automatically turn off HDMI CEC devices when the TV is turned off . TV Auto Power On: Allow the TV to turn On with CEC-enabled devices. Device Connect: Allow CEC-enabled devices to communicate with each other when connected through an HDMI cable. CEC Device Lists: View a list of all CEC-enabled devices.NOTES HDMI cables must be used to connect HDMI CEC-compatible devices to your TV. The HDMI CEC feature of the connected device must be turned on. If you connect an HDMI device that is not HDMI CEC-compatible, all the HDMI-CEC Control features do not work. Depending on the connected HDMI device, the HDMI-CEC Control feature may not work. Advanced Settings: Access the Advanced Settings menu. Menu Timeout : Set the amount of time that you’d like for the menu to display: 5s, 10s , 20s , 30s , 60s or Off. Use Mode: Set the TV to use in Home or Store Mode (Some models have a Store Mode with 4K Video). Input Labels: Edit the input labels. Default LiveTV Source: Select the default input selected by the remote control Live TV button. Setup Wi]ard: Use the Setup Wizard for instructions to help you set up your TV. Power Indicator: Set the Power Indicator light to stay On or Off when watching TV.About TV Menu System Information: View system information. Hisense Legal Disclaimer: Read the Hisense Legal Disclaimer. Check Firmware Upgrade: Check to ensure that your TV has received the latest firmware. Signal Diagnosis: Check availability of some functions. Restore To Factory Default: Restore your TV back to the factory default.SettingsPictureSoundChannelNetworkSystemAbout TVSystem InformationHisense Legal DisclaimerCheck Firmware UpgradeSignal DiagnosisRestore To Factory Default
17Parental Controls The Parental Controls setting allows you to block content that is not appropriate for children to watch. You can do this by creating a 4-digit password. The factory-default password is 0000.Turning Parental Controls 'On'To access Parental Controls:1. Press the [Quick Setup Menu] button on your remote.2. Press the right arrow button to display the full menu settings.3. Select System > Parental Controls.4. Press [OK] on your remote, an Enter PIN window displays. Using the numerical keypad on your remote, enter the factory-default password 0000 and press [OK].5. Go to Locks.6. Press the [OK] button to turn the locks On.You will see the other Parental Control settings change from a greyed out state and become highlighted. When this occurs, begin adding other settings to the Block Time, Channel Block, Program Block, Input Block, Change PIN or Restore Parental Control Defaults features. Block Time: Choose a time of day that you’d like to start blocking certain programs. Channel Block: Block programs by channels when you turn on the Parental Controls feature. Program Block: Block certain programs when you turn on the Parental Control feature. Input Block: Block content from devices that are connected to certain TV ports. App Block: Change PIN: Change your PIN that you use to access Parental Controls. Restore Parental Control Defaults: Restore Parental Controls back to the factory setting.Description of U.S. TV RatingsContent Defined asAAllDSuggestive dialogLCourse or crude languageSSexual situationsVViolenceFV Fantasy ViolenceDescription of Age-based RatingsAge Defined asTV-Y All childrenTV-Y7 Directed to older childrenTV-G General audienceTV-PG Parental Guidance SuggestedTV-14 Parents strongly cautionedTV-MA Mature Audiences OnlyNOTEIf you forget your password, call the Hisense Consumer Electronics Care Center.Parental Controls
18U.S. Movie RatingsRating Defined asGGeneral audiencePG Parental Guidance suggestedPG-13 Parents strongly cautionedRRestrictedNC-17 No one 17 and under permittedXA rating that has now been superseded by NC-17Canadian English RatingsRating Defined asCChildrenC8+ Children 8 years and olderGGeneral programming that is suitable for all audiencesPG Parental Guidance14+ Viewers 14 years and older18+ Adult ProgrammingCanadian French RatingsRating Defined asGGeneral (appropriate for all ages and must contain little to no violence or sexual content)8+ General but inadvisable for young children (could contain scenes disturbing to children under eight).Recommended for viewing with parent.13+ Programming is appropriate for children 13 and older and may contain moderate violence, language and some sexual situations16+ Recommended for children 16 and older and may contain strong violence, language and sexual content18+ Programming intended for viewers that are 18 and older. Programming may contain extreme violence and graphic sexual content/pornography.NOTEAll ratings that are higher than those you select are also blocked. For example, if you choose to block the PG-13 rating, then the higher ratings (R and NC-17) are automatically blocked too.Parental Controls
19Getting familiar with the Home screenGetting familiar with the Home screen The simple design of the Home screen menu makes it easy to navigate. It accesses Apps, Media or Inputs.To access the Home screen, press the [] button on your remote control and use the arrows buttons to make your selection. NOTEThe menus are only for reference, may vary slightly from the actual screen. Figure 12. Home screen123The Apps appear on the Home screenEach time you access the Home screen, the Apps will display on the screen. You can quickly enter these applications what you want.The navigation bar appear on the Home screenPress the [ / ] buttons to select icons of the navigation bar, you can enter to Apps, Media and Input.Indicators and Icons on the top of the Home screenYou can always view the current time in the top right corner of the Home screen.If your TV is connected to the Internet through a wireless connection or an Ethernet cable, then an icon will display in the top right corner of the screen. This location makes it very convenient for you to determine if you still have Internet connectivity as you use the TV. In addition, if you have connected a device (such as a thumb drive) to a USB port and your TV recognizes it, then a device icon will also display in the same area.
20Live TVLiveTVTo view broadcast programs, select the Live TV icon on the screen or press the [Live TV] button on your remote. Viewing Channel informationAs you use the [Channel] button on your remote to scroll through channels, an information banner appears on the top of the screen.Figure 13. Information bannerThe information banner displays the following information:1. Channel number2. Lock status3. Input4. Start/Stop time progress bar of the current program5. Show identification6. Channel name7. Current date and time8. Prompt 9. Beginning and end time of the next program10. Program name If you are watching a particular channel, you can also press the up arrow on the [D-pad] of your remote to view channel information.Viewing a channel listAfter you have done an automatic channel scan (if you're using an Antenna) or are receiving your channels through a cable provider, you can view your list of channels by pressing [OK] on your remote.You will see the channel list display on the right side of the screen.Creating a 'Favorites' listTo quickly access your most-watched channels, you can create a 'Favorites' list.To create your 'Favorites' list:1. Press the [Quick Setup Menu] button on your remote.2. Press the right arrow button to display the Settings Menu.3. Select Channel > Favorites List4. Using the up/down arrows on the D-pad of your remote, select a channel and press [OK].A heart-shaped indicator will appear beside the channel as confirmation that it has been successfully added.Viewing your 'Favorites' listTo view channels that you've added to your Favorites list simply press [OK] on your remote to call out the Channel list.The channel list appears on the right side of the screen and heart-shaped icons are shown next to the channels that make up your Favorites list.12:09 AM Thu. 30 Jun.Antenna│ 1/1 unknown 5.1CH│ 4:3│ 480i │ CC1:00 AM - 4:00 AM AT05 480iAT05 480i10:00 PM 1:00 AM1672 3 4 59108AT05-25-2
21AppsAppsAppsNumerous factory-installed apps are available for you to choose from for your entertainment preferences.Opera TV StoreOpera TV Store contains cloud-based apps optimized for your TV. The apps range from Video, Music, Social Networking, Games and News Information.To begin using Opera TV Store, you simply need to accept the End-User License Agreement and then select the app that you want to use.TV BrowserThe TV Browser allows you to surf the Internet on your TV and provides quick access to the Google™ search engine.To view a website or search using the TV Browser:1. Using the Navigation buttons on your remote, navigate to TV Browser icon. 2. Press [OK] on your remote. The browser window displays.3. Using the navigation buttons on your remote, navigate up to the URL bar to place your cursor there.4. Press [OK] on your remote to bring up the on-screen keyboard.5. Type the website address or search term on the text field.6. Press the [Blue] special function button towards the top of the remote (under the number pad). The website address or search term you’ve typed populates in the URL bar window.7. Select the forward arrow (to the right of the URL bar) and press [OK] on your remote to load the page or start the search. Installing an AppEven though your TV has numerous factory-installed apps, there may be others that you’d like to download. To install an app:1. From the Home screen, select the Apps.2. Navigate to Opera TV Store.3. Navigate to the Search tab at the top of the screen.4. Begin typing the name of the app. As you begin typing the first two to three letters the Opera Store suggests words to quicken your search time.5. Use the navigation buttons of your remote to select the app. A page displays that shows a written description of the app. 6. Click on Open or Add to Favorites.Removing an AppYou can only delete apps that you’ve downloaded to the TV. Factory-installed apps can not be deleted. To delete an app:1. From the Apps screen, use the directional arrows on the navigation buttons of your remote to select the app that you want to remove.2. Press the [Red] on your remote control. A dialog message displays that asks if you’re sure you want to remove the app.3. Press [OK] on your remote. A confirmation message displays and the icon is removed from the Apps list. NOTE If an app is deleted,the information related to that app is also removed.
22MediaMedia is a central location for you to upload and view or listen to different types of content (for example, your photos, music and movies) through the following methods: A USB thumb drive or hard drive Your mobile phone, tablet or other personal device: You can stream movies, pictures and photos that are stored on your personal device and play or view the content on your TV.When you connect your thumb drive or other personal device to the TV, the TV automatically detects it and displays a device icon in the top right corner of the screen. Panels that appear on the Media screenThe Media screen displays three panels: Picture, Video, Music.File formats that may be supportedNOTE: Due to differences in programming tools and other factors, some of the file formats that are listed may or may not be supported.Medium File FormatVideo .avi (MPEG2, Divx), .mkv(Divx), .mpeg(MPEG2), .wmv(Divx, XviD)Picture .jpgMusic .avi(mp3, WMA, ac3), .mp3Viewing VideoWhile viewing videos you will see a number of icons appear at the bottom of the screen. You can use the [D-pad] button of your remote to select these icons that will control the video. Browsing ContentTo browse through content based on the type that you wish to access:1. Navigate to the appropriate menu tab on the left side of the screen and select Music, Video or Picture. The library of items displays on the right side of the screen.2. Navigate to the right side of the screen and click on the name of the folder that contains your content.3. Make your selection to play or view the content.If you want to close out of the Media center, then press the [EXIT] button on your remote.MediaMoving App Icons aroundSelect the app you want to move, then press the [Green] on your remote control and press [ / / < / >] to change order.NOTEApps may be updated without prior notice, please take the actual as standard.Some applications may not be available, depending on your TV series and the area you are.Customi]ing the name of your TV If you have several TV’s in your home then you may want to customize the name of your TV. By giving your TV a name, it will make it easier for you to identify it when connecting devices to the TV to stream or mirror content.To customize the name of your TV: 1. Press the [ ] button on your remote to open the Quick Setup menu. 2. Go to Full menu settings > Network >TV Name.3. Select User Input and press [OK] to bring up the keyboard and begin typing the name.4. When you are finished, power off the TV and power it back on for the change to take effect.
23Viewing Pictures as a SlideshowTo view pictures in a slideshow:1. Navigate to the Pictures tab.2. Click on Start the Slideshow.The slideshow of your pictures begins to play. To stop the slideshow, press the [OK] button on your remote and press it again to restart it. Mirroring content from your device to the TVUsing Anyview Cast to mirror content from your device to the TV screenThe Hisense Anyview Cast is an app that enables you to share (or cast) a video, audio or image from your Android-based device to the TV.From your tablet or phoneTo mirror content from your tablet to the TV:1. From the TV Settings, go to Network > Anyview Stream and turn it on.2. Press the [INPUT] button on your remote and select the Anyview Cast app.3. Turn on the wireless display function on your Android-based device.NOTESome Android-based devices may not support casting.4. Find your TV in the list of devices that displays and select it.5. Wait for the ‘Creating Connection’ progress bar to complete on the TV screen and the video or image will display in a moment.
24 Software updates for your TVSoftware updates for your TVThe software (also referred to as firmware) is part of what powers your TV. Hisense will provide software updates to continuously enhance your TV and correct any issues that may impact your user experience; therefore, we recommend that you keep your TV connected to the Internet to automatically receive updates when they are available. You can choose to receive updates automatically or check for software updates and install them manually.Checking for updates automatically In order for your TV to receive software notification updates automatically, it must be turned 'On' and connected to the Internet. The Auto Firmware Upgrade setting (which enables your TV to receive the updates automatically) is turned to 'On' by factory default. If you turn the Auto Firmware Upgrade setting 'Off', it will disable this functionality of your TV. NOTEWhile your TV is on and checking for updates, the program that you are watching will not be interrupted.Disabling the Auto Firmware Upgrade feature If you do not want your TV to automatically check for updates and to receive notifications when they are available, then:1. Using your remote, press the [Quick Setup Menu] button, and press the right arrow button to display the Settings Menu.2. Go to About TV > Auto Firmware Upgrade and turn the feature 'Off' By doing this, you will have to manually check to see if you have the latest software update. Checking for the latest firmware To manually check for the latest firmware:1. Using your remote, press the [Quick Setup Menu] button, and press the right arrow button to display the Settings Menu.2. Go to About TV> System Information.Manually installing software updatesIf you have not kept your TV connected to the Internet or you turned the Auto Firmware Upgrade feature 'Off' then you'll need to manually install the software. If the Check Firmware Upgrade screen shows that an updated package is available, then:1. From the Check Firmware submenu, select Download upgrade pack.2. Follow the rest of the steps that display
25Quick Problem-Solving TipsWhen you experience an issue with your TV, turn it off and on again. If this does not resolve the problem, then refer to the tips below. If the problem is still not resolved, then contact us. ISSUES POSSIBLE SOLUTIONSThere is no sound or picture from the TVt Check to see if the power cord is plugged into a power outlet.t Press the Power button on the remote control to activate the unit from 'Standby' mode.t Check to see if the LED light is on or not. If it is, then the TV is receiving power.I have connected an external source to my TV and do not see a picture and/or hear any soundt Check for the correct output connection on the external source and for the correct input connection on the TV.t Make sure you have made the correct selection for the input mode for the incoming signal.When I turn on my TV, there is a delay for a few seconds before the picture appears. Is this normal?t Yes, this is normal. The TV is initializing and searching for previous setting information.The picture is normal but there is no soundt Check the volume settings.t Check if 'Mute' mode is set to On.Sound but no picture or black and white picturet If the picture is black and white, unplug the TV from the AC outlet and replug it after 60 seconds.t Check that the Color is set to 50 or higher. t The sound and/or picture is distorted or appears wavyt away from the TV.t Insert the power plug of the TV set into another power outlet.The sound and picture is blurry or cuts outt If using an external antenna, check the direction, position and connection of the antenna.t A horizontal or vertical stripe appears on the picture and/or the picture is shakingt Check to see if there is an appliance or electric tool nearby that is causing interference. The plastic cabinet makes a "clicking" type of soundt The 'click' sound can occur when the temperature of the television changes. This change causes the television cabinet to expand or contract, which makes the sound. This is normal and the TV is OK.The remote control does not workt t Change the batteries in the remote control.t Check if the batteries are correctly installed.The FCC ID number of WIFI Module is PPQ-WN4640R
Quick Start GuideHelp Hisense improve the environment by reducing paper waste. For detailed instructions and feature descriptions, access the full User Manual online.H5 Series
© 2017 Hisense Company Ltd. All Rights Reserved.All material in this Quick Start Guide is the property of Hisense Company Ltd. and its subsidiaries, and is protected under US, CANADA, MEXICO and International copyright and/or other intellectual property laws. Reproduction or transmission of the materials, in whole or in part, in any manner, electronic, print, or otherwise, without the prior written consent of Hisense Company Ltd. is a violation of Hisense Company Ltd. rights under the aforementioned laws.No part of this publication may be stored, reproduced, transmitted or distributed, in whole or in part, in any manner, electronic or otherwise, whether or not for a charge or other or no consideration, without the prior written permission of Hisense Company Ltd.Requests for permission to store, reproduce, transmit or distribute materials may be made to one of the following addresses:USA: Hisense USA Corporation PO Box 3289 Suwanee, GA 30024CANADA: Hisense Canada Co., Ltd 2283 Argentia Road, Unit 16 Mississauga, ON, Canada L5N 5Z2MEXICO: Hisense Mexico S. de R.L. de C.V. Blvd. Miguel de Cervantes Saavedra No 301 Torre Norte Piso 2, Col. Ampliación Granada Miguel Hidalgo, Ciudad de México, C.P. 11520Hisense, and any and all other Hisense product names, logo’s, slogans or marks are registered trademarks of Hisense Company Ltd. and its subsidiaries. All other trademarks are the property of their respective holders.©2017. All rights reserved. Hisense and the Hisense logo are trademarks of Hisense. Other brand and product names are trademarks of their respective owners.
1Enjoy TV in a Super Smart, Super Simple and Super Unique Way!Multiple Connection Methods Builtin :iFi 2 USB Connector 3 HDMI Connectors 1 LAN Ethernet portHigh-Quality Picture and Sound Vibrant contrast and brightness to display images accurately Crisp sound and powerful TV speaker outputSmart LED TV with Popular Features Ultrafast access to launch Netflix Numerous builtin social media, gaming and movie apps Thousands of movie titles to view Air bridge technology for screensharing capability Many other cool featuresEasy Setup Menu and Simple Design Short and easytofollow firsttime setup menu Simple user interface UI design to navigate the TV screens Descriptive features to help make your selections
2Register Your TV!Congratulations on the purchase of your new TV! This Quick Start Guide will walk you through a few easy steps to set up your TV. For detailed instructions, access the User Manual on the support pages listed below.Because we value your business, we want to keep you in the know of 'all things Hisense'. Using your mobile phone, scan the Registration page QR code to register your TV. Depending on the make and model of your phone, you may need to download a QR code scanning app.Country Customer Care Center Hisense Support Page REGISTER YOUR TVU.S.A  Phone: 1-888-935-8880 Hours of Operation: Monday - Friday: 9 AM to 9 PM EST Saturday - Sunday: 9 AM to 6 PM EST Service Email: Service@hisense-usa.comhttp://www.hisense-usa.com/support/http://www.hisense-usa.com/support/productReg.aspCANADA  Phone: 1-855-344-7367 Hours of Operation: Monday - Friday: 8 AM to 8 PM EST Service Email: canadasupport@hisense.comhttp://www.hisense-canada.com/support/http://www.hisense-canada.com/support/productReg.aspMEXICO  Phone: 01-800-008 8880 Hours of Operation: Monday - Friday 9:00-18:00 Service Email: servicio@hisense.com.mxhttp://www.hisense.com.mx/support/*Scan to download user manualhttp://www.hisense.com.mx/support/productReg.aspDisclaimer: This Quick Start Guide is intended as a general guideline to help you set up your TV. Images throughout this document are for illustrative purposes only and may differ from the actual product.
3PACKAGED CONTENTSYour package in which you purchased your new TV contains the following items: TV 2 AAA batteries A left and right leg that forms the TV stand Quick Start Guide (this document) Important Safety Information and Warranty Card leaflet 4 screws Remote Control Power Cord IMPORTANT: To prevent accidentally discarding items that came with your TV, be sure to check ALL of the foam in the carton box.Required tools and devices :ireless router not included for Internet connectivity Phillips screwdriver not included to secure the TV stand HDMI and other types of cables not included to connect external devices to the TV :all mount bracket not included if you prefer to mount the TV to the wall· Please check foam for accessories before discarding.· Veuillez vérifier la mousse pour qu'il n'y ait pas d'accessoires avant de la jeter.· Antes de desechar la espuma, asegúrese de retirar todos los accesorios.
4BUTTONS AND PORTS ON THE TVBack View of the TV TV Side ViewUSB 2DC 5V 0.5AMAXHDMI 2ARCANT/CABLEHDMI 1 USB 1DC 5V 0.5AMAXSERVICELANDIGITAL AUDIO OUTAUDIOOUTCOMPONENT INYPBPRAV INVIDEOLRAUDIOHDMI 3TV Bottom View
5STEP 1. Attach the TV stand or wall mount bracket (not included)Attach the TV Stand CAUTION:Be sure to disconnect the A/C power cord before installing a stand or :all-Mount brackets.The LED display is very fragile and must be protected at all times when installing the legs that form the stand. Be sure to protect the TV screen from getting scratched or damaged by any hard objects. In addition, DO NOT exert pressure on the front of the TV at any time because it could crack.To attach the left and right leg that forms the stand:1. Carefully place your TV face down on a soft, flat surface to prevent damage to the TV or scratching to the screen.2. Remove the 2 legs from the foam and then insert the stands into the bottom slots of the TV. 3. Use the screws that came inside the carton with your TV to secure each leg tightly.legScrews:ST4×12 for 32"ST4X14F for 40"ST4×16 for 43"Screws: ST4×12 for 32"ST4X14F for 40"ST4×16 for 43"leg
6Attach the Wall Mount Bracket (not included)Before you begin the third-party manufacturer instructions, be sure to do the following things:1. Place the TV face down on a clean, safe and cushioned surface. 2. Remove the TV stand if you already attached it. 3. Place the spacers not included in the corresponding bracket holes. Screw not providedCAUTION: When you attach the mount, be sure to use the spacers (provided by the third-party manufacturer) between the TV and the bracket. To prevent internal damage to the TV and ensure it is mounted securely, be sure to use fixing screws (not provided) that are 8 ~ 10 mm (32"/40") / 9.5 ~ 11.5 mm (43") in length when measured from the attaching surface of the mounting hook.Rear cover of the TV SpacerScrew:all mount bracket8 ~ 10 mm（32"/40"）9.5 ~ 11.5 mm（43"）:all mount hole pattern VESA mm200 × 200:all mount screw size mmM6Follow instructions provided with the :all mount bracket. To complete the installation, please contact the wall-mount manufacturer or the retailer from which you purchased the TV. The selected screws are 8 ~ 10 mm 32"/40" / 9.5 ~ 11.5 mm 43" in length when measured from the attaching surface of the rear cover. The diameter and length of the screws differ depending on the :all mount bracket model.NOTE: The diameter and length of the screws differ depending on the wall mount bracket model.Bracket not providedSpacer not provided
7STEP 2. Connect devices to your TVCheck to ensure that you have selected the right cables for the ports and that they are connected securely. Loose connections can affect the quality of the picture image and color.TV label Port Cable External Equipment Brief DescriptionANT/CABLEAntenna VHF/UHF AntennaANT OUTConnect an outdoor VHF/UHF antenna.HDMIDVD Player/RecorderSet-top BoxSatellite ReceiverSatellite antenna cableVCRVideo CameraConnect a High De¿nition Multimedia Interface HDMI cable from an external device.COMPO-NENT INYGreenConnect a component video cable and left-right audio cables from an external AV device.PBBluePRRedL:hiteRRedAV INVIDEO YellowConnect a composite video cable and left-right audio cables from an external AV device.L:hiteRRedDIGITAL AUDIO OUTSpeakerAudio Ampli¿erConnect an optical cable from an external digital audio system.
8TV label Port Cable External Equipment Brief Description AUDIO OUTConnect headphones to hear audio from the TV.Connect an audio adapter not provided from an external analog audio system.USBDC 5V 0.5AMAXConnect a USB device for browsing photos, music and movies.The unit only recognizes a USB Memory Stick.LANLANConnect an Ethernet cable to access a network or the Internet. The TV also has a wireless connectivity feature.SERVICE This port is not available for you to connect an external device. It can only be used by our factory for testing purposes.:hiteRedSpeaker Audio Ampli¿er
9Buttons on your TV remoteNRTVOL CHOKCCBACK EXITINPUTInfrared transmitterPower on / offEnter Channels / input numbersMedia content control function buttonsDash button Select a digital sub-channelD-pad (up/down/left/right navigation buttons)Volume (up/down)Choose to leave the Video description feature On or OffLive TVReturn to the previous place in the menu or appChange TV input sourceThe button for the Quick setup menuConfirmation buttonChannel (up/down)Set the audio language(MTS)Mute and restore soundExit the applicationTurn Closed Caption On/OffSpecial function buttonsQuick access buttons to appsDisplay the Home screenAPPAPPAPPAPPTVMTS
10STEP 3. Begin using your remote1. Slide the back cover to open the battery compartment of the remote control.2. Insert two AAA size batteries. Make sure to match the  and - ends of the batteries with the  and  -  ends indicated in the battery compartment.3. Replace the battery compartment cover.Important Information about the remote and batteries: Discard batteries in a designated disposal area. Do not throw them into a fire. Remove old batteries immediately to prevent them from leaking into the battery compartment. If you do not intend to use the remote control for a long time, remove the batteries.  Battery chemicals can cause a rash. If the batteries leak, clean the battery compartment with a cloth. If chemicals touch your skin then wash it immediately. Do not mix old and new batteries. Do not mix alkaline, standard (carbon-]inc) or rechargeable (NiCd, NiMH, etc.) batteries. Do not continue using the remote if it gets warm or hot.Call our Support Center immediately on the support website.Insert the batteriesGently push and slide Gently push and slideRemote Control Range Information The remote control can work at a distance of up to 26 feet in front of the TV set. It can work at a 30 degree horizontal or vertical angle.Program Your Universal Cable or Satellite Remote Control to Operate Your New Television (only for USA)If you would like to program your other household remote controls to your new television, please refer to the User's Manual supplied by your Cable or Satellite provider. It should include instructions on how to program their remote to your television.A list of codes for the most common Cable and Satellite providers are listed below. Use the code that is associated with your Cable or Satellite provider if applicable.DIRECTV......0178, 10178, 10019, 10748, 11314, 11660, 11710, 11780, 12049, 10171, 11204, 11326, 11517, 11564, 11641, 11963, 12002, 12183Time Warner Cable......386, 0178, 10178, 400, 450, 461, 456, 0748, 1463, 0463, 10463Comcast......0178, 10178, 10463, 11463, 10748, 11314, 11660, 10171, 11204, 11326, 11517, 11641, 11780, 11785, 11892, 11963, 12002Cox Communications......0178, 10178, 1326, 1463Dish Network......505, 627, 538, 720, 659If the code associated with your Cable or Satellite provider is not listed, does not work or you cannot locate the instructions to program your remote, call your local Cable or Satellite provider's customer service center.
11STEP 4. Power on the TVPlug the power cord into a power outlet.If your Cable or Satellite provider does not have a code available, please contact us at one of the phone numbers on Page 2.Using Your Cable Set-top Box or Satellite Receiver Remote as a ‘Universal’ RemoteIf you prefer to use your Cable Set-top Box or Satellite Receiver Remote as a ‘Universal Remote’, then visit the Support page to view a list of the codes.:all OutletPower Cord
12Screen TaskLanguageand Location Using the D-pad arrows of your remote, choose your Language, Country and Time Zone. Next, navigate to the Forward arrow and press OK.TERMS OF SERVICE Press OK to select Accept All. :hen you’re done navigate to the Forward arrow and press OK.TV USAGE MODE Select Home which appears by default. Next,navigate to the Forward arrow and press OK. Note: ‘Store mode’ should only be selected by Retailers who plan to demonstrate the TV.NET:OR. CONNECTION If your TV does not automatically detect an Ethernet connection, then select Wi-Fi. :hen you’re done, select your network from the list that displays and move to the next screen.STEP 5. Complete the first-time setup menuAfter the splash screen that shows the logo appears, begin the first-time setup menu.Press the Power button on the remote to turn on the TV. A splash screen that shows the logo appears. Next, the First-Time Setup Menu begins by prompting you to choose your Language, Country, and Time Zone.
13Screen TaskREMOTE BUTTON SETUPSelect how you receive your TV channels. Choosefrom one of the following sources below and then moveto the next screen. TV AV Component HDMITIP: You only need to scan for channels if your TV is connected to an Antenna.Congratulations! Your TV is now ready to use.Press the OK con¿rmation button on your remote if you are ¿ne with the selections that appear on the screen. Otherwise, navigate to the back arrow on the screen to change your selection.STEP 6. Begin to enjoy your TVYour Smart TV is easy to use and brag-worthy!Now that you’ve completed the first-time setup menu, the Home screen is your starting point for navigating the TV. Gone are the days where your TV only provides one way for you to be entertained. This showpiece provides you the convenience of watching a program on a live channel, accessing Video on Demand to watch a movie and many other entertainment options.Using your remote, press the Home button to begin enjoying your TV.Disclaimer: Subscriptions or other payments may be required to access content through some applications. Some or all of the included or downloaded application services in this Hisense device may not function depending on the Internet connection, local limitations of included applications or other reasons outside of Hisense’s control. HISENSE EXPRESSLY DISCLAIMS RESPONSIBILITY FOR ANY APPLICATION SERVICE FROM FUNCTIONING AT ANY TIME, FOR CONTENT IN ANY APPLICATION SERVICE, FOR DISRUPTIONS OF SERVICE, LOCAL OR REGIONAL LIMITATIONS, WARRANTIES OF TITLE, NO INFRINGEMENT, AND FOR IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. By purchasing this device, you accept such Disclaimer without any claim on Hisense at any time.
14PRODUCT SPECIFICATIONSModel Name 32H5D+32H550740H5D+40H550743H5D+43H5507Dimension : × H × D:ithout Stand 28.9 × 17.1 × 3.7 inches 734 × 434 × 93 mm35.6 × 20.6 × 3.4 inches 903 × 523 × 86 mm38.3 × 22.3 × 3.6 inches 971 × 567 × 92 mm:ith Stand 28.9 × 18.7 × 6.7 inches 734 × 474 × 171 mm35.6 × 22.2 × 8.2 inches 903 × 563 × 208 mm38.3 × 24.2 × 8.0 inches 971 × 613 × 203 mm:eight :ithout Stand 9.5 lbs 4.3 kg15.4 lbs 7.0 kg19.4 lbs 8.8 kg:ith Stand 9.7 lbs 4.4 kg15.9 lbs 7.2 kg19.8 lbs 9.0 kgActive Screen Size Diagonal31.5 inches 39.6 inches 43 inchesScreen Resolution 1366 × 768 1920 × 1080 1920 × 1080Audio Power 6 :  6 :7 :  7 :7 :  7 :Power consumption 50:70:75:Power Supply 120 V ~ 60 HzReceiving systemsAnalog NTSCDigital ATSC / QAM.ey Apps NetÀix, Vudu, YouTube, Amazon Instant Video, Pandora and Opera App Some apps only for USAPorts 3 HDMI ports, 2 USB port, LAN port for Ethernet, 1 Digital Audio Output, 1 RF Input, 1 Earphone Audio Output, 1 RCA Composite Video Input, 1 left/right Audio Input for Composite, 1 RCA Component Video InputComponent Input 480 I / 60 Hz, 480 P / 60 Hz, 720 P / 60 Hz, 1080 I / 60 Hz only for 40"/43", 1080 P / 60 Hz only for 40"/43HDMI Input RGB / 60 Hz 640×480, 800×600, 1024×768, YUV / 60 Hz 480 I, 480 P, 720 P, 1080 I only for 40"/43", 1080 P only for 40"/43"Other features Smart TV, :i-Fi, Dynamic contrast Picture, VESA standard wall mount supportDisclaimer: All products, product specifications, and data are subject to change without notice to improve reliability, function, design or otherwise.'''' would be replaced by any number, letter or blank.
15QUICK PROBLEM-SOLVING TIPS:hen you experience an issue with your TV, turn it off and on again. If this does not resolve the problem, then refer to the tips below. If the problem is still not resolved, then refer to our contact information on page 2.ISSUES POSSIBLE SOLUTIONSThere is no sound or picture from the TV Check to see if the power cord is plugged into a power outlet. Press the Power button on the remote control to activate the unit from 'Standby' mode. Check to see if the LED light is on or not. If it is, then the TV is receiving power.I have connected an external source to my TV and do not see a picture and/or hear any sound Check for the correct output connection on the external source and for the correct input connection on the TV. Make sure you have made the correct selection for the input mode for the incoming signal.:hen I turn on my TV, there is a delay for a few seconds before the picture appears. Is this normal? Yes, this is normal. The TV is initializing and searching for previous setting information.The picture is normal but there is no sound Check the volume settings. Check if 'Mute' mode is set to On.Sound but no picture or black and white picture If the picture is black and white, unplug the TV from the AC outlet and replug it after 60 seconds. Check that the Color is set to 50 or higher.  Try different TV channels.The sound and/or picture is distorted or appears wavy An electric appliance may be affecting the TV. Turn off any appliances that are nearby and move it farther away from the TV. Insert the power plug of the TV set into another power outlet.The sound and picture is blurry or cuts out If using an external antenna, check the direction, position and connection of the antenna. Adjust the direction of your antenna or reset or ¿ne tune the channel.A horizontal or vertical stripe appears on the picture and/or the picture is shaking Check to see if there is an appliance or electric tool nearby that is causing interference.
16ISSUES POSSIBLE SOLUTIONSThe plastic cabinet makes a "clicking" type of sound The 'click' sound can occur when the temperature of the television changes. This change causes the television cabinet to expand or contract, which makes the sound. This is normal and the TV is O..The remote control does not work Con¿rm that TV still has power and is operational. Change the batteries in the remote control. Check if the batteries are correctly installed.Need more help?Additional help is available online at support links on Page 2. You will find answers to frequently asked questions, downloadable firmware and more.
17Certification and ComplianceFCC NoticeThis device has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This device generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.However, there is no guarantee that interference will not occur in a particular installation. If this device does cause harmful interference to radio or television reception, which can be determined by turning the device off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the device and receiver. Connect the device into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthori]ed modifications to this equipment. Such modifications could void the user’s authority to operate the equipment.The :i-Fi Module complies with FCC radiation exposure limits set forth for an uncontrolled environment. This device should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body.ENERGY STARYour Hisense TV is ENERGY STAR qualified in the "Energy savings" mode. It meets strict energy efficiency guidelines set by the U.S. Environmental Protection Agency and Department of Energy. ENERGY STAR is a joint program of these government agencies, designed to promote energy efficient products and practices. Changes to certain features, settings, and functionalities of this TV i.e. TV Guide, Picture, Sound can increase or change the power consumption. Depending upon such changed settings, the power consumption may exceed the limits required for the ENERGY STAR qualification in the "Energy savings" mode.NOTE: This only applies for some TV models.Manufactured under license from Dolby Laboratories. Dolby, Dolby Audio, and the double-D symbol are trademarks of Dolby Laboratories.The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.Manufactured under license from THAT Corporation.THAT Corporation, dbx-tv, Total Sonics, Total Surroundand Total Volume are registered trademarks of THATCorporation. Total Technology is a trademark of THAT Corporation.

Navigation menu