Hisense Electric LCDD0009 Part15 Subpart B-LCD TV User Manual

Hisense Electric Co., Ltd. Part15 Subpart B-LCD TV

Contents

User Manual 1_Rev.1

Download: Hisense Electric LCDD0009 Part15 Subpart B-LCD TV User Manual
Mirror Download [FCC.gov]Hisense Electric LCDD0009 Part15 Subpart B-LCD TV User Manual
Document ID1524183
Application ID2fVNEFdbfDFPmmVa5wCNBw==
Document DescriptionUser Manual 1_Rev.1
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize428.92kB (5361446 bits)
Date Submitted2011-08-17 00:00:00
Date Available2011-08-17 00:00:00
Creation Date2011-08-16 17:51:49
Producing SoftwareAcrobat Distiller 9.2.0 (Windows)
Document Lastmod2011-08-16 17:51:55
Document Titleuntitled
Document CreatorAdobe Illustrator CS3
Document Author: songdan

Innovation for life
ES-
HOSPITALITY LCD TELEVISION
MODEL NO. LHDN32V88MH
LTDN42V77MH
ii
Important safety instructions
Warnings
Cautions
Accessories
Installing and removing the stand
Installing the stand
Attaching the TV to a desk
Removing the stand
Installing a wall-mount bracket
TV components
Front and side controls
Back connections
Remote control
Using the remote control
Installing remote control batteries
Aiming the remote control
Making connections
Connecting the power
Selecting a location
Connecting an HDMI device
Connecting a component video device
Connecting an antenna,cable TV,or satellite TV box
Connecting a VCR, camcorder, or game console
Connecting a computer
Connecting a AV receiver
Connecting headphones
Understanding the basics
Selecting the video input source
Selecting a channel
Adjusting the volume
Displaying program information
Navigating the menus
On-screen menu overview
Adjusting the picture
Choosing the display format (aspect ratio)
Adjusting the sound
Selecting the audio mode
Changing channel settings
Adjusting Power settings
Adjusting the TV settings
Troubleshooting
Video and audio
Remote control
General
Maintenance
Cleaning
Specifications
Legal notices
Adjusting hotel settings
10
10
10
12
12
12
12
13
14
14
15
15
15
15
16
16
16
16
17
iii
FCC Statement
NOTE:
The manufacturer is not responsible for any radio or TV interference caused by unauthorized
modifications to this equipment.Such modifications could void the user’s warranty.
NOTE:
This equipment has been tested and found to comply with the limits for a class B digital Device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio Communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
- Consult the dealer or an experienced radio/TV technician for help.
LHDN32V88MH / LTDN42V77MH
CHILD SAFETY
It makes a difference how and where you use
your flat panel display
As you enjoy your new product, keep these
safety tips in mind
The issue
The home theater entertainment experience is a growing trend, and larger TVs are popular
purchases. However, TVs are not always supported on the proper stands or installed
according to the manufacturer’s recommendations. We and the consumer electronics
industry are committed to making home entertainment enjoyable and safe.
TVs that are inappropriately placed on dressers, bookcases, shelves, desks, speakers,
chests, or carts may fall over and cause injury.
Tune into safety
One size of TV stand does not fit all. Use only a TV stand
rated for the weight and size of your TV.
Carefully read and understand all enclosed instructions for
proper use of this product.
Don’t let children climb on or play with entertainment system
furniture and TVs.
Don’t place TVs on furniture that can easily be used as
steps, such as a crate or chest of drawers.
Remember that children can become excited while watching
a program, especially on a “larger-than-life” TV. Make sure
that you place or install the TV where it cannot be pushed,
pulled over, or knocked down.
Make sure that you route all cords and cables so that they
cannot be pulled or grabbed by curious children.
Wall mounting
If you decide to wall mount your TV, always remember:
One size of wall mount does not fit all. Use only a wall mount rated for the weight and
size of your TV and that has been recommended by this TV manufacturer, listed in this
manual, or otherwise listed by an independent laboratory as suitable for your TV.
Follow all instructions supplied by the TV and wall mount manufacturers.
If you have any doubts about your ability to safely wall mount your TV, get help from a
professional installer.
Make sure that the wall where you are mounting the TV is
appropriate. Some wall mounts are not designed to be mounted
to walls backed with steel studs or cinder blocks. If you are
unsure, ask a professional installer.
TVs can be heavy. At least two people are required for safe wall mount installation.
2
Important safety instructions
LHDN32V88MH / LTDN42V77MH
Important safety instructions
CAUTION
RISK OF ELECTRIC
SHOCK
DO NOT OPEN
This symbol indicates that dangerous
voltage constituting a risk of electric
shock is present within your TV. This
label is located on the back of your TV.
This symbol indicates that there are
important operating and maintenance
instructions in the literature
accompanying your TV.
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with a dry cloth.
Do not block any ventilation openings. Install in accordance with
the manufacturer's instructions.
8 Do not install near any heat sources such as radiators, heat
produce heat.
9 Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades with one
wider than the other. A grounding type plug has two blades and
a third grounding prong. The wide blade or the third prong are
provided for your safety. If the
your outlet, consult an electrician for replacement of the obsolete
outlet.
10 Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the point
where they exit from the apparatus.
11
12 Use only with a cart, stand, tripod, bracket, or
the apparatus. When a cart is used, use caution
when moving the cart/apparatus combination to S3125A
avoid injury from tip-over.
13 Unplug this apparatus during lightning storms or when unused
for long periods of time.
14
required when the apparatus has been damaged in any way, such
as power-supply cord or plug is damaged, liquid has been spilled
or objects have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally, or has
been dropped.
15 The wall plug is the disconnecting device. The plug must remain
readily operable.
16 An apparatus with a three-prong, grounding-type plug is a Class I
apparatus, which needs to be grounded to prevent possible
electric shock. Make sure that you connect this Class I television
to a grounding-type, three-prong outlet.
17 Remote control batteries should not be exposed to excessive heat
18 The apparatus should not be exposed to dripping or splashing,
on the apparatus.
Warnings
Electric shock hazard
ric shock, do not remove any cover or
expose the device to rain or moisture. No user-serviceable parts are
Lightning
For added protection for your device receiver during a lightning storm,
or when it is left unattended and unused for long periods of time,
unplug it from the power outlet and disconnect any antenna or cable
system. This helps prevent property damage and personal injury from
lightning and power line surges.
Power lines
An outside antenna system should not be located in the vicinity of
overhead power lines or other electric light or power circuits, or where it
can fall into such power lines or circuits. When installing an outside
antenna system, extreme care should be taken to keep from touching
such power lines or circuits as contact with them might be fatal.
Handling the LCD panel
Your TV’s screen is made of glass. Do not drop your TV or hit, jolt,
or press hard against the LCD panel. If the screen breaks, be
careful of broken glass.
If the LCD panel is broken, make absolutely sure that you do not
If the liquid gets in your mouth, immediately gargle, rinse, and
consult with your doctor. Also, if the liquid gets in your eyes or
touches your skin, consult with your doctor after rinsing for at
least 15 minutes or longer in clean water.
Replacement parts
When replacement parts are required, make sure that the service
have the same characteristics as the original part. Unauthorized
hazards.
Safety check
After completing any service or repair to this device, ask the service
technician to perform routine safety checks to determine that your TV is
in correct operating condition.
Power source
Operate your TV only from the type of power source indicated on the
marking label. If you are not sure of the type of power supplied to your
home, consult an electrician or your local power company.
Installing and removing the stand
LHDN32V88MH / LTDN42V77MH
Cautions
Damage requiring service
Unplug this TV from the power outl
service personnel under the following conditions:
When the power supply cord or plug is damaged or frayed.
If liquid has been spilled or objects have fallen into your TV.
If your TV has been exposed to rain or water.
If your TV does not operate normally by following the operating
instructions. Adjust only those controls that are covered by the
operating instructions because incorrect adjustment of other
controls may result in damage and will often require extensive
nician to restore your TV to its normal
operation.
If your TV has been dropped or damaged in any way.
When your TV exhibits a distinct change in performance.
Outdoor antenna grounding
If an outside antenna or cable system is connected to your TV, make sure
that the antenna or cable system is grounded to provide some
protection against voltage surges and built-up static charges. Article
810 of the National Electrical Code, ANSI/NFPA No. 70, provides
information with respect to correct grounding of the mast and
supporting structure, grounding of the lead-in wire to an antenna
discharge unit, size of grounding conductors, location of the
antenna-discharge unit, connection to grounding electrodes, and
requirements for the grounding electrode.
Condensation may also form during the summer if the TV is exposed to
the breeze from an air conditioner. In such cases, change the location of
the TV.
Mobile telephone warning
To avoid interference with your TV picture and sound, operating
problems, or even damage, keep your cordless and cellular telephones
away from the TV.
End of life directives
small amount of mercury. Disposal of these materials may be regulated
for environmental reasons. Your TV also contains material that can be
recycled and reused. For disposal or recycling information, contact your
local authorities or the Electronic Industries Alliance at www.eia.org to
Non-active pixels
provide exceptionally sharp video quality. Occasionally, a few
of your TV, and are not considered defects.
Accessories
Make sure the following accessories are included in the box with your
TV:
Remote control
AC power cord
AAA batteries (2)
Stand
Installing and removing the
stand
Antenna lead-in wire
Grounding clamp
Antenna discharge unit
Grounding conductors
Warning: Before attampting assembly or removal of the stand, unplug
the AC power cord.
Ground clamps
Cautions:
Power service grounding electrode
system
Electric service equipment
Note to CATV system installer
Article 820 of the National Electrical Code, ANSI/NFPA No. 40 provides
it states that the cable
ground must be connected to the grounding system of the building as
close to the point of cable entry as practical.
Condensation
Moisture will form on the TV if the TV is brought from cool surroundings
into a warm room or if the temperature of the room rises suddenly.
When this happens, the TV's performance may be impaired. To prevent
this, let the TV stand in its new surroundings for about an hour before
switching it on, or make sure that the room temperature rises gradually.
You must install your TV onto a stand in order for it to stand upright on
or other vertical surface, you must remove the stand .
Read these instructions carefully before you try to assemble the stand
or remove the stand .
Make sure that you handle the TV carefully when attempting to
assemble or remove the stand. If you are not sure of your ability to do
this, contact a professional installer or service technician. Hisense is
not responsible for any damages or injuries that occur because of
mishandling or incorrect assembly.
Use a soft cushion or covering to prevent scratching or damage to the
TV screen or cabinet.
Installing the stand
Note
To install the stand:
1 Remove the stand from the box and place it on a table or bench.
4
LHDN32V88MH / LTND42V77MH
TV components
2 Lay the TV (screen down) on the edge of the table or bench. Make
sure that you put a soft cloth or cushion between the table or
bench and the TV.
3 Align the base with the TV, then secure the stand to the TV with
the 4 screws provided.
Installing a wall-mount bracket
If you want to attach the TV to a wall-mount bracket (not provided), you
Warning
only. To reduce the risk of hazards, do not perform any servicing other
than that contained in the operating instructions unless you are
To install a wall-mount bracket:
screw
1 Lay your TV face down on a table or bench. Make sure that you
put down a soft cushion or cloth so that your TV does not get
scratched.
2 Remove the pedestal stand. See “Removing the stand” above.
3 Secure the wall-mount bracket to the back of your TV using the
four screws provided with the bracket.
stand
4 Carefully lift the TV into an upright position.
To remove the stand, see the following procedure.
7.87inch(200mm)
7.87inch(200mm)
Attaching the TV to a desk
The TV must be attached to desk so it cannot be pulled in a
forward/backward direction,potentially causing injury or
damaging the product.
wall mount screws
Screws-M5×L(table depth + 8~10mm)
Example:Table depth - 15mm: Screws-M5×25
TV components
Front and side controls
(90mm)
3.54inch
14.17inch(360mm)
stand
table
4-Screws
NOTE:
Be sure to follow the instructions,incorrect installation of the stand
(pedestal) may result in the TV falling over.
0.39inch(10mm)
Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
XMP Toolkit                     : 3.1-701
Modify Date                     : 2011:08:16 17:51:55+08:00
Create Date                     : 2011:08:16 17:51:49+08:00
Metadata Date                   : 2011:08:16 17:51:55+08:00
Creator Tool                    : Adobe Illustrator CS3
Format                          : application/pdf
Title                           : untitled
Creator                         : songdan
Document ID                     : uuid:4771d27a-569c-4f26-af2f-fe687586ace0
Instance ID                     : uuid:9000bdf6-95ce-40ba-a216-221d22928e27
Producer                        : Acrobat Distiller 9.2.0 (Windows)
Page Count                      : 15
Author                          : songdan
EXIF Metadata provided by EXIF.tools
FCC ID Filing: W9HLCDD0009

Navigation menu