Hisense Electric LCDD0015 Part15 Subpart B-LCD Monitor User Manual
Hisense Electric Co., Ltd. Part15 Subpart B-LCD Monitor
W9HLCDD0015_User Manual
ES-
Innovation for life
MODEL NO. LTDN39V77MH
HOSPITALITY LCD TELEVISION
ii
Important safety instructions 2
2
3
3
Warnings
Cautions
Accessories
Installing and removing the stand 3
3
4
4
4
Installing the stand
Attaching the TV to the desk
Removing the stand
Installing a wall-mount bracket
TV components 4
4
5
5
Front and side controls
Back connections
Remote control
Using the remote control 6
6
6
Installing remote control batteries
Aiming the remote control
Making connections 7
7
7
7
7
8
8
8
9
9
Connecting the power
Selecting a location
Connecting an HDMI device
Connecting a component video device
Connecting an antenna,cable TV,or satellite TV box
Connecting a VCR, camcorder, or game console
Connecting a computer
Connecting a home theater system
Connecting headphones
Understanding the basics 9
9
9
9
9
10
10
10
12
12
12
12
12
14
14
Selecting the video input source
Selecting a channel
Adjusting the volume
Displaying program information
Navigating the menus
On-screen menu overview
15
15
15
16
16
16
16
Video and audio
Remote control
General
Adjusting the picture
Choosing the display format (aspect ratio)
Adjusting the sound
Adjusting the Features
Selecting the audio mode
Adjusting the Installation
Troubleshooting
Maintenance
Cleaning
Legal notices
17
Adjusting hotel settings
Connecting devices with USB interface 9
1
As you enjoy your new product, keep these
safety tips in mind
The issue
The home theater entertainment experience is a growing trend, and larger TVs are popular
purchases. However, TVs are not always supported on the proper stands or installed
according to the manufacturer’s recommendations. We and the consumer electronics
industry are committed to making home entertainment enjoyable and safe.
TVs that are inappropriately placed on dressers, bookcases, shelves, desks, speakers,
chests, or carts may fall over and cause injury.
Tune into safety
One size of TV stand does not fit all. Use only a TV stand
rated for the weight of your TV.
Carefully read and understand all enclosed instructions for
proper use of this product.
Don’t let children climb on or play with entertainment system
furniture and TVs.
Don’t place TVs on furniture that can easily be used as
steps, such as a crate or chest of drawers.
Remember that children can become excited while watching
a program, especially on a “larger-than-life” TV. Make sure
that you place or install the TV where it cannot be pushed,
pulled over, or knocked down.
Make sure that you route all cords and cables so that they
cannot be pulled or grabbed by curious children.
Wall mounting
If you decide to wall mount your TV, always remember:
One size of wall mount does not fit all. Use only a wall mount rated for the weight of your
TV and that has been recommended by this TV manufacturer, listed in this manual, or
otherwise listed by an independent laboratory as suitable for your TV.
Follow all instructions supplied by the TV and wall mount manufacturers.
If you have any doubts about your ability to safely wall mount your TV, get help from a
professional installer.
Make sure that the wall where you are mounting the TV is
appropriate. Some wall mounts are not designed to be mounted
to walls backed with steel studs or cinder blocks. If you are
unsure, ask a professional installer.
TVs can be heavy. At least two people are required for safe wall mount installation.
f
CHILD SAFETY
It makes a difference how and where you use
your flat panel display
LTDN40V86MH
2Important safety instructions
Important safety instructions
1Read these instructions.
2Keep these instructions.
3Heed all warnings.
4Follow all instructions.
5Do not use this apparatus near water.
6Clean only with a dry cloth.
7Do not block any ventilation openings. Install in accordance with
the manufacturer's instructions.
8Do not install near any heat sources such as radiators, heat
produce heat.
9Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades with one
wider than the other. A grounding type plug has two blades and
a third grounding prong. The wide blade or the third prong are
provided for your safety. If the
your outlet, consult an electrician for replacement of the obsolete
outlet.
10 Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the point
where they exit from the apparatus.
11
12 Use only with a cart, stand, tripod, bracket, or
the apparatus. When a cart is used, use caution
when moving the cart/apparatus combination to
avoid injury from tip-over.
13 Unplug this apparatus during lightning storms or when unused
for long periods of time.
14
required when the apparatus has been damaged in any way, such
as power-supply cord or plug is damaged, liquid has been spilled
or objects have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally, or has
been dropped.
15 The wall plug is the disconnecting device. The plug must remain
readily operable.
16 An apparatus with a three-prong, grounding-type plug is a Class I
apparatus, which needs to be grounded to prevent possible
electric shock. Make sure that you connect this Class I television
to a grounding-type, three-prong outlet.
17 Remote control batteries should not be exposed to excessive heat
18 The apparatus should not be exposed to dripping or splashing,
on the apparatus.
Warnings
Electric shock hazard
ric shock, do not remove any cover or
expose the device to rain or moisture. No user-serviceable parts are
Lightning
For added protection for your device receiver during a lightning storm,
or when it is left unattended and unused for long periods of time,
unplug it from the power outlet and disconnect any antenna or cable
system. This helps prevent property damage and personal injury from
lightning and power line surges.
Power lines
An outside antenna system should not be located in the vicinity of
overhead power lines or other electric light or power circuits, or where it
can fall into such power lines or circuits. When installing an outside
antenna system, extreme care should be taken to keep from touching
such power lines or circuits as contact with them might be fatal.
Handling the LCD panel
Your TV’s screen is made of glass. Do not drop your TV or hit, jolt,
or press hard against the LCD panel. If the screen breaks, be
careful of broken glass.
If the LCD panel is broken, make absolutely sure that you do not
If the liquid gets in your mouth, immediately gargle, rinse, and
consult with your doctor. Also, if the liquid gets in your eyes or
touches your skin, consult with your doctor after rinsing for at
least 15 minutes or longer in clean water.
Replacement parts
When replacement parts are required, make sure that the service
have the same characteristics as the original part. Unauthorized
hazards.
Safety check
After completing any service or repair to this device, ask the service
technician to perform routine safety checks to determine that your TV is
in correct operating condition.
Power source
Operate your TV only from the type of power source indicated on the
marking label. If you are not sure of the type of power supplied to your
home, consult an electrician or your local power company.
CAUTION
RISK OF ELECTRIC
SHOCK
DO NOT OPEN
This symbol indicates that dangerous
voltage constituting a risk of electric
shock is present within your TV. This
label is located on the back of your TV.
This symbol indicates that there are
important operating and maintenance
instructions in the literature
accompanying your TV.
S
3125A
LTDN40V86MH
Installing and removing the stand 3
Cautions
Damage requiring service
Unplug this TV from the power outl
service personnel under the following conditions:
When the power supply cord or plug is damaged or frayed.
If liquid has been spilled or objects have fallen into your TV.
If your TV has been exposed to rain or water.
If your TV does not operate normally by following the operating
instructions. Adjust only those controls that are covered by the
operating instructions because incorrect adjustment of other
controls may result in damage and will often require extensive
nician to restore your TV to its normal
operation.
If your TV has been dropped or damaged in any way.
When your TV exhibits a distinct change in performance.
Outdoor antenna grounding
If an outside antenna or cable system is connected to your TV, make sure
that the antenna or cable system is grounded to provide some
protection against voltage surges and built-up static charges. Article
810 of the National Electrical Code, ANSI/NFPA No. 70, provides
information with respect to correct grounding of the mast and
supporting structure, grounding of the lead-in wire to an antenna
discharge unit, size of grounding conductors, location of the
antenna-discharge unit, connection to grounding electrodes, and
requirements for the grounding electrode.
Note to CATV system installer
Article 820 of the National Electrical Code, ANSI/NFPA No. 40 provides
it states that the cable
ground must be connected to the grounding system of the building as
close to the point of cable entry as practical.
Condensation
Moisture will form on the TV if the TV is brought from cool surroundings
into a warm room or if the temperature of the room rises suddenly.
When this happens, the TV's performance may be impaired. To prevent
this, let the TV stand in its new surroundings for about an hour before
switching it on, or make sure that the room temperature rises gradually.
Condensation may also form during the summer if the TV is exposed to
the breeze from an air conditioner. In such cases, change the location of
the TV.
Mobile telephone warning
To avoid interference with your TV picture and sound, operating
problems, or even damage, keep your cordless and cellular telephones
away from the TV.
End of life directives
small amount of mercury. Disposal of these materials may be regulated
for environmental reasons. Your TV also contains material that can be
recycled and reused. For disposal or recycling information, contact your
local authorities or the Electronic Industries Alliance at www.eia.org to
Non-active pixels
provide exceptionally sharp video quality. Occasionally, a few
of your TV, and are not considered defects.
Accessories
Make sure the following accessories are included in the box with your
TV:
Remote control
AC power cord
AAA batteries (2)
Stand
Quick Setup Guide
Installing and removing the
stand
You must install your TV into the stand in order for it to stand upright on
or other vertical surface, you must remove the stand .
Warning: Before attampting assembly or removal of the stand, unplug
the AC power cord.
Cautions:
Read these instructions carefully before you try to assemble the stand
or remove the stand .
Make sure that you handle the TV carefully when attempting to
assemble or remove the stand. If you are not sure of your ability to do
this, contact a professional installer or service technician. Hisense is
not responsible for any damages or injuries that occur because of
mishandling or incorrect assembly.
Use a soft cushion or covering to prevent scratching or damage to the
TV screen or cabinet.
Installing the stand
Note
To install the stand:
1Remove the stand from the box and place it on a table or bench.
Antenna lead-in wire
Grounding clamp
Antenna discharge unit
Grounding conductors
Ground clamps
Power service grounding electrode
system
Electric service equipment
2
1
3
4
5
6
7
1
2
3
4
5
6
7
LTDN40V86MH
4TV components
2Lay the TV (screen down) on the edge of the table or bench. Make
sure that you put a soft cloth or cushion between the table or
bench and the TV.
3Align the base with the TV, then secure the stand to the TV with
the 4 screws provided.
4Carefully lift the TV into an upright position.
The TV must be attached to desk so it cannot be pulled in a
forward/backward direction,potentially causing injury or
damaging the product.
(pedestal) may result in the TV falling over.
Removing the stand
Attaching the TV to a desk
You must remove the stand before you can wall-mount the TV.
Note
To remove the stand:
1Lay the TV (screen down) on the edge of the table or bench. Make
sure that you put a soft cloth or cushion between the table or
bench and the TV.
2Remove the 4 screws holding the stand to the TV, then remove
the stand.
Installing a wall-mount bracket
If you want to attach the TV to a wall-mount bracket (not provided), you
Warning
only. To reduce the risk of hazards, do not perform any servicing other
than that contained in the operating instructions unless you are
To install a wall-mount bracket:
1Lay your TV face down on a table or bench. Make sure that you
put down a soft cushion or cloth so that your TV is not scratched.
2Remove the pedestal stand. See “Removing the stand” above.
3Secure the wall-mount bracket to the back of your TV using the
four screws provided with the bracket.
TV components
Screws:M5×L(table depth + 8~10mm)
Example:Table depth = 15mm Screws:M5×25
LTDN40V86MH
NOTE:
Be sure to follow the instructions,in correct installation of the stand
12 inch(305mm)
4-Screws
Desk
6.5 inch
(165mm)
Front and side controls
Item Name Description
Power indicator The light shows whether the TV is on or standby
mode.
Remote control
sensor
Receives signals from the remote control.
Please do not block.
MENU Display the onscreen display(OSD) or Exit to close
the OSD.
INPUT Select the INPUT menu.
VOL / VOL Volume adjusting bottom,to increase or
decrease the volume.
Channel selection bottom,to increase or
decrease the channel.
CH
(power) (standby mode).
5
6
7
1
2
3
4
1
2
4
3
7
5
6
/CH
TV components 5
Remote controlBack connections
Item Name Description
USB
HDMI 1/2/3 Connect an HDMI device to one of these jacks.
PC AUDIO jacks
VGA jack
Connect a computer (audio and video) to these
jacks.
Plug headphones into this jack.
COMP1
COMP2
Connect component video devices to these
jacks.
AUDIO OUT
jack
AV Connect a standard AV device, such as a
camcorder or game console, to these jacks.
jack
ANT IN Connect an antenna or cable TV to this jack.
DIGITAL AUDIO
OUT jack
Connect a digital coaxial cable to this connector,
then to a digital sound system.
1
2
3
4
5
6
7
8
9
10
(headphone)
jack
Item Name Description
POWER
Press to turn on the TV or put the TV in standby
mode.
Caution: The TV continues to receive power
even in standby mode. Unplug the power cord
to disconnect power.
INPUT
ENTER
7 8
0
EN-31205
ASPECT
GUIDE
INFO
MENU
CH
VOL
DMP
CCD
MTS/SAP
SLEEP
SOUND
EXIT
TV
1 23
5 6 4
7 8 9
0
LAST
PICTURE
MUTE
1
2
VOL / VOL Press to increase or decrease the volume.
CCD
SOUND
more information.
Press to select the sound mode. You can select
Standard, Custom, Vivid, Game, Cinema and
standard , custon , music and clear voice.
MTS/SAP
In analog TV mode, press to select STEREO,
SAP (secondary audio language), or MONO.
In digital TV mode (DTV), press to select the
audio track. For more information.
PICTURE
Press to select the video mode. You can select
Power Saver.
3
4
5
6
LTDN40V86MH
11
RJ12
Connect a RJ-12 Cable to this jack, then to an
external control device(such as a computer or
A/V control system), to control theTV functions
externally.
SERVICE
2
6
4
7
98 310
HDMI2
COMP 2
HEADPHONE
AUDIO OUT
VIDEO L RLR
AV
DIGITAL
AUDIO OUT
YP
BPRLR
HDMI1
5
6
4
1
11
HDMI3
COMP1
PC AUDIO
RJ12
PC
SERVICE
ANT IN
USB
VGA
Connect a audio cable to this connector.
Thise unit has USB interface and can be
connected the stand avd USB 1.1 and USB
2.0 USB FLASH STICK.
Service only, don't use.
6Using the remote control
Using the remote control
Installing remote control batteries
To install remote control batteries:
1Press down on the battery compartment cover lock, then remove
the remote control cover.
2Insert two AAA batteries into the battery compartment. Make
sure that the + and – symbols on the batteries match the +
and – symbols in the battery compartment.
3Replace the cover. Make sure that the lock snaps into place.
4 Install screw.
Battery precautions:
Dispose of batteries as hazardous waste.
Do not mix old and new batteries. Mixing old and new batteries can
shorten the life of new batteries and can cause old batteries to leak.
Remove batteries as soon as they become inoperable. Chemicals that
can leak from the batteries can cause a rash. If the batteries leak,
clean the battery compartment with a cloth.
If the remote control is not used for an extended period of time,
remove the batteries.
Do not expose batteries to excessiv
other heat sources.
MENU Display the main menu.
Press or to move up or down in on-screen
menus.
Press or to move left or right in on-screen
menus or to adjust menu settings.
ENTER or to open sub-menus.
Numbers
dash)
Press the number buttons to enter channel
numbers or the parental control password.
Press to select a digital sub-channel.
Program guide
(EPG) function
buttons
After pressing the GUIDE button in the digital
TV channel option, the same color buttons will
appear with explanations in the on-screen
display (OSD). Follow the steps shown in the
OSD.
TV Press to select the TV as the video input source.
Select screen mode.
INPUT Press to open the INPUT SOURCE menu, then
press or to select the video input source
you want.
ASPECT
GUIDE
CH / CH Press to go to the next or previous channel in
the channel list.
Item Name Description
7
8
9
10
11
12
13
14
15
16
17
18
19
20
INFO Display the current channel number.
MUTE
DMP
Press to mute the sound. Press again to restore
Press to browse Music and Phone on USB stick
plugged into TV.
the sound.
EXIT Press to close the on-screen menu.
LAST Return to previous channel.
SLEEP Press to set the sleep timer.
Press to open the DTV program guide(if
available).
21
22
23
Aiming the remote control
To aim the remote control:
Point the remote control towards the remote sensor on the front
of your TV.
Notes:
Do not expose the remote control to shock or liquids.
Do not use the remote control in an area with high humidity.
Do not place the remote control in direct sunlight.
Do not place objects, such as furniture, between the remote control
and the remote sensor.
The remote control may not work if direct sunlight or bright light
shines on the remote sensor. Either move your TV or change the angle
at which you use the remote control.
INPUT
ENTER
7 8
0
EN-31205
ASPECT
GUIDE
INFO
MENU
CH
VOL
DMP
CCD
MTS/SAP
SLEEP
SOUND
EXIT
TV
1 23
5 6 4
7 8 9
0
LAST
PICTURE
MUTE
LTDN40V86MH
When you are listening to music and enjoy
pictures.You can switch between playing and
pause through this button.
Exit the current state.
Go back to preview menu.
7
Making connections
Make sure that you only use the type of power source indicated on the
marking label.
Always unplug the power cord when not using the TV for a long
period of time.
Selecting a location
You should select a location for the TV:
Where direct light does
That has indirect and soft lighting
Where the TV has access to an antenna or cable TV connection
Where the TV has access to a power outlet
Note:
may cause eye strain.
Connecting an HDMI device
Note: If your device has an HDMI connection, we recommend you use it to
get the best picture and sound quality possible.
To connect an HDMI device:
Connect one end of an HDMI cable (not included) to the HDMI 1
or HDMI 2 jack on Or HDMI3 on the side of your TV.
then connect the other end of the cable to the HDMI OUT jack on
Note: To connect a DVI device, use a DVI to HDMI adapter cable to connect
to the HDMI jack on the TV, then connect an audio cable to the
PC AUDIO jack on the back of the TV.
To play from the HDMI device:
1Turn on the TV, then press INPUT. The INPUT SOURCE menu
opens.
2Press or to select HDMI1,HDMI2,HDMI3, then press
ENTER.
3Turn on the HDMI device, then set it to the correct mode. Refer to
the instructions that came with the HDMI device.
Connecting a component video device
Component cables often have red, green, and blue color-coded video
connectors and red and white audio connectors. Match the colors when
making connections.
To connect a component video device:
1Make sure that your TV’s power cord is unplugged and the
2Connect a component video cable to the COMPONENT OUT jacks
on the component video device.
3Connect the other end of the component video cable to the
COMPONENT jacks on the back/side of your TV.
4Connect an audio cable to the AUDIO OUT jacks (L/R) on the
component device.
5Connect the other end of the audio cable to the COMPONENT
AUDIO-R and AUDIO-L jacks on the back/side of your TV.
Y BR
L R
Component video device
Component video cable
Audio cable
Making connections
Before you make any connections:
Check the plugs on the ends of cables to make sure that they are
the correct type before you try plugging them into jacks on the
TV.
Make sure that all plugs are securely inserted into the jacks.
Loose connections can result in image or color problems.
When connecting devices to the TV, make sure that the TV and
unplugged.
Connecting the power
To connect the power cord:
Connect the power cable to the AC IN jack on the back of the TV,
then connect the other end to a power outlet.
Notes:
HDMI device
HDMI cable
LTDN40V86MH
HDMI2
COMP 2
HEADPHONE
AUDIO OUT
VIDEO L RLR
AV
DIGITAL
AUDIO OUT
YP
BPRLR
HDMI1
SERVICE
ANT IN
HDMI3
COMP1
PC AUDIO
RJ12
PC
USB
VGA
the HDMI device.
POWER CORD INLET
POWER CORD
HDMI3
COMP1
PC AUDIO
RJ12
PC
USB
VGA
HDMI2
COMP 2
HEADPHONE
AUDIO OUT
VIDEO L RLR
AV
DIGITAL
AUDIO OUT
YP
BPRLR
HDMI1
SERVICE
ANT IN
HDMI2
COMP 2
HEADPHONE
AUDIO OUT
VIDEO L RLR
AV
DIGITAL
AUDIO OUT
YP
BPRLR
HDMI1
SERVICE
ANT IN
Making connections
8
To connect an antenna, cable TV, or satellite TV box:
Connect one end of a 75-Ohm, coaxial cable to the jack ANT IN
on the back of the TV, then connect the other end of the cable to
the antenna or cable TV wall jack.
Notes:
We recommend using a 75-Ohm, coaxial cable to reduce interference
and noise that may be caused by radio wave transmissions.
Do not bundle the coaxial cable with the power cord or any other
cables.
If you are using an antenna and reception is not good, contact a
service technician to adjust the antenna.
Connecting a VCR, camcorder, or game
console
Note: If the VCR, camcorder, or game console has component jacks
(better), or an HDMI jack (best), connect them using the best available
connection.
To connect a VCR, camcorder, or game console:
1Make sure that your TV’s power cord is unplugged and the VCR,
2Connect one end of a standard AV cable (not included) into the
AV video jack on the back of the TV, then connect the other end
of the cable to the AV OUT VIDEO jack on the external device.
3Connect the audio connectors of the AV cable (the red and white
connectors) to the AV OUT AUDIO jacks of the external device,
then connect them to the AV L and R jacks on the back of your TV.
To play the external AV device:
1Turn on the TV, then press INPUT. The INPUT SOURCE menu
opens.
2Press or to select Video, then press ENTER.
3Turn on the device, then start playback on the device.
Connecting a computer
To connect a computer:
1Make sure that your TV’s power cord is unplugged and the
2Connect one end of a VGA cable (not included) to the VGA jack on
the side of the TV, then connect the other end of the cable to the
3Connect one end of an audio cable with a stereo mini-plug (not
included) to the PC AUDIO jack on the side of the TV, then
connect the other end of the cable to the AUDIO OUT jack on
the computer.
To play video from the computer:
1Turn on the TV, then press INPUT. The INPUT SOURCE menu
opens.
2Press or to select PC, then press ENTER.
3Turn on the computer, then adjust the computer display
properties as needed.
ANT IN jack on
the side of the TV
Antenna, cable TV,
or satellite box
Home antenna terminal
(75 ohm)
To play from the component video device:
1Turn on the TV, then press INPUT. The INPUT SOURCE menu
opens.
2Press or to select Component1 or Component2,
then press ENTER.
3Turn on the component video device and start playback. Refer to
the instructions that came with the component video device.
Connecting an antenna, cable TV, or
satellite TV box
If you are connecting a satellite TV or cable box, you can use one of the
following (if available):
Best - HDMI cable
Better - Video component cables
Good - Video composite cable
Acceptable - 75-ohm coaxial cable.
VCR, camcorder,
or game console
AV cable
Note: Cables are often
color-coded to connectors.
Connect yellow to yellow,
red to red, and white to
white.
75-Ohm coaxial cable
VGA
cable Audio cable
Computer
LTDN40V86MH
VGA jack on the computer.
9
Connecting a home theater system
Connecting using a digital audio cable
To connect using a digital coaxial cable:
1Make sure that your TV’s power cord is unplugged and the home
2Connect one end of a digital coaxial audio cable (not included) to
the DIGITAL AUDIO OUT jack on the back of the TV.
3Connect the other end of the audio cable to the digital coaxial
input jack on the home theater system.
To play TV sound through a home theater system:
1Turn on the TV and select a program to watch.
2Turn on the home theater system and select the TV sound source,
then adjust the volume to a comfortable level.
Connecting headphones
Warning: When using headphones, adjust the headphone volume to
avoid excessively loud volume which can damage your hearing.
To connect headphones:
Plug the headphones (not included) into the (headphone)
jack on the back of the TV.
Note: The TV sound automatically mutes when headphones are
connected.
DIGITAL
AUDIO OUT
Home theater
system
Digital coaxial cable
Understanding the basics
1Plug the power cord into an AC power outlet.
2Press (power). Your TV turns on.
3
goes into standby mode.
Warning: When your TV is in standby mode, it is still receiving power. To
completely disconnect power, unplug the power cord.
Note: If your TV does not receive an input signal for several minutes, it
automatically goes into standby mode.
Understanding the basics
Selecting the video input source
To select the video input source:
1Turn on your TV, then press INPUT on the remote control or on
the TV. The INPUT SOURCE menu opens.
2Press or to highlight the video source you want, then press
ENTER. Options include TV,Video,Component1,Component2,
Selecting a channel
Tip: If you are using a cable or satellite box, use the remote control that
came with that device to change channels.
To select a channel:
Press CH /CH to go to the next or previous channel.
Press the number buttons to enter the channel number you want,
then wait for the channel to change, or press ENTER to change
the channel immediately.
To select a digital channel, press the number buttons to
select the main digital channel, then press the dash(-). button,
then the number buttons again to select the sub-channel.
Wait for the channel to change or press ENTER to change the
channel.
Note: Button presses must be within three seconds of each other.
Press LAST to go to the last channel viewed.
Press GUIDE to display a list of memorized channels, press or
to select the channel you want from the list, then press ENTER to
go to that channel.
Note: If the list has more than one page, press or to scroll through
the pages.
Adjusting the volume
To adjust the volume:
Press VOL /VOL to increase or decrease the volume.
Press MUTE MUTE again
to restore the sound.
LTDN40V86MH
HDMI2
COMP 2
HEADPHONE
AUDIO OUT
VIDEO L RLR
AV
DIGITAL
AUDIO OUT
YP
BPRLR
HDMI1
SERVICE
ANT IN
Connecting devices with USB interface
Plug the USB stick into USB port on the side of TV.
1. The USB detect message will pop out when you plug in USB stick
into TV. Select "OK" to review content on USB.
2. Or you can press INPUT button on the remote control or on the TV
and select DMP in source list.
HDMI3
COMP1
PC AUDIO
RJ12
PC
USB
VGA
PC(computer),HDMI1,HDMI2,HDMI3,DMP.
10 Understanding the basics
Navigating the menus
On-screen menu overview
your TV. To access the menu, press MENU. The menus and their
corresponding functions are described in the following table:
Picture
Brightness Lets you adjust the level of brightness on the
screen. Increasing brightness can add more light
to dark areas of the picture.
Contrast Lets you adjust the level of picture contrast.
Increasing the contrast adds more light to the
white areas of the picture.
Saturation Lets you adjust the level of color intensity.
Sharpness Lets you adjust the focus of the picture. Increase
sharpness for a clearer picture, or decrease
sharpness for a smoother picture.
Backlight Lets you control panel overall brightness and
background.
Color
Temperature
Lets you select one of three preset color
temperature settings: Cool, Normalor Warm.
ENTER
MENU
EXIT
ENTER
ENTER
Press to display the Main menu.
Press to select menus, to adjust selected
items, or move on-screen cursor left or right.
Press to select the menu items.
sub-menu.
Press to close the menu.
Displaying program information
To display program information:
Press INFO to show an information banner. The information
banner shows current program information such as channel
number, video input source, and resolution.
Digital signal information—Displays channel number,
station name, channel label (if preset), broadcast program
name, signal type, audio information, resolution,and current
program start and end times when watching a digital
Analog signal information—Displays channel number,
channel label (if preset), signal type, audio information, and
resolution when watching an analog channel.
Press GUIDE to show the digital program guide, which may show
a list of available programs, program times, and program
summaries, depending on the in formation provided by the
broadcaster.
channel.
Preset Mode
conditions.
1
2
Sound
Sound mode
2Balance Lets you adjust the balance between the left
and right speakers.
3
LTDN40V86MH
Picture TV
.
.
.
.
.
.
.
Picture mode Standard
Contrast
Brightne
Backlight
Saturation
Hue
Sharpness
Color temperature Normal
50
50
5
50
0
5
Move: Enter: OK Exit: EXIT
Hue
Sound TV
Sound mode Standard
Equalizer >>>
Balance
Digital audio language
0
Move: Enter: OK Exit: EXIT
Features TV
Caption settings >>>
Sleep time 0
Power on >>>
Power off >>>
V-Chip >>>
Transpaerncy 0
OSD Timeout >>>
Move: Enter: OK Exit: EXIT
Equalizer
Features
Caption
settings
3
Power on
Sleep time
Adjusts the color balance of the picture.Use this
control to make skin tone look more natural.
Lets you select one of preset sound mode or
Lets you select the audio frequency you want to
adjust and change its value.
programs.
closed
Lets you select sleep timer among 0 to 180
Lets you set the TV on time of every day.
English
Digital audio
language
Lets you select the language track you prefer for
viewing digital TV programs. Available options
depend on your digital TV provider.
minutes.
11
Understanding the basics
Installation
4
4
PC
5
5
Time
Source Labels
Reset AV
settings
Auto
adjustment
Clock
Phase
Horizontal
shift
Vertical shift
Standby time
Language
LTDN40V86MH
Features
3
OSD Timeout
Installation TV
Language English
Channels >>>
Time >>>
Source Labels >>>
Reset AV settings Start now
Move: Enter: OK Exit: EXIT
Channels
PC PC
Auto adjustment Start now
Clock
Phase
Horizontal shift
Vertical shift
Standby time
0
15
30
15
0
Move: Enter: OK Exit: EXIT
DMP DMP
Slide time Long
Transitions None
Rotate 0
Zoom 1X
Move: Enter: OK Exit: EXIT
DMP
6
Slide time
Transitions
Rotate
Zoom
6
Lets you adjust Menu transparency.
Lets you select the lanugage for the On-Screen
Display. Choose from English, French, or Spanish.
settings and daylight saving.
Adjust the clock used to synchronizing the
image.
Set display time of Menu.
Lets you select certain programs to be blocked.
Lets you zoom in/out picture.
Lets you select RF signal source for your TV. And
lets you initiate an automatic channel scan to
search the available channels on your TV.
Lets you name each input.
Change setting back to default. (picture and
sound only)
Adjust the position of image on screen
automatically.
Adjust the phase of the clock used for
synchronizing the image.
Adjust the horizontal position of the image.
Adjust the
input.
vertical position of the image.
Lets you rotate picture.
V-Chip
Lets you select the photo slide time: Long,
Medium or Shot.
Signal mode
DMP Function Introduction
Pcture
Music
support format
JPEG
MP3
Transparency
,
Lets you select photo transitions way from
current picture to next picture.
12
Adjusting the picture
To adjust the picture:
1Press MENU. The Main menu opens.
2Press ENTER or . The Picture menu opens.
3Press or to highlight an option, then press or to access
the option, and press or to adjust the option. You can select:
Picture Mode—Selects the picture mode. You can select:
Vivid (a bright and vivid picture)
Standard (a standard picture)
: You can also press PICTURE on the remote control to select the
Backlight
–Lets you control panel overall brightness. Increasing
the backlight can add more light to overall screen picture and the
TV uses more power consumption. While decreasing the backlight
can add more darkness to overall screen picture and the TV uses less
power consumption.
Saturation– Lets you adjust the intensity of the colors.
Sharpness–Lets you increase the sharpness level for clearer
images or decrease the sharpness level for smoother images.
Color temperature –Lets you change the color
temperature. You can select the color temperature from
three options: Cool, Normal or Warm.
4Press EXIT
to return to the previous menu, or press
ʉ to
close the menu.
Choosing the display format (aspect ratio)
To choose the display format:
1Press ASPECT on the remote control repeatedly to cycle through
the available display formats. Options include:
Normal —Selects the 4:3 aspect ratio to show a picture
with black bar on both right and left hand side.
Zoom1 —Enlarges the picture but may crop the top and
bottom of picture. And has less black bar on right and left
Full Screen—Shows a full-screen picture.
Panorama —Stretches the picture at the edges, but
maintains a good aspect ratio at the center of the screen.
Adjusting the sound
To adjust the sound:
1Press MENU. The Main menu opens.
2Press or to highlight sound, then press ENTER or . The
sound menu opens.
3
Equalizer—
4Press to return to the previous menu, or press ʉ to
close the menu.
Selecting the audio mode
To select the audio mode:
Press SOUND on the remote control one or more times to cycle
through the available sound modes. Options include:
Standard
erutciPerutciP
picture mode.
–Lets you increase or decrease the contrast of the
picture. Increase the contrast to adjust the white areas of the
picture or decrease the contrast to adjust the black areas of
the picture.
Contrast
–Lets you increase or decrease the brightness of
the picture. Increasing the brightness can add more light to
dark areas of the picture, while decreasing the brightness
can add more darkness to light areas of the picture.
Brightness
Note
ENTER
Press or to highlight an option, then press or to access
the option, and press or to adjust the option. You can select:
ENTER
Balance—
—
Adjusts the balance between the left and right
audio channels.
than Normal aspect mode.
Note: In analog TV mode, allows you to select all aspect modes.
In digital TV mode, allows you to select Normal mode and full-
screen mode. Zoom and panorama modes are not available.
(for normal programs).
Music (for music programs).
Clear Voice (for news or sports programs).
Custom (for a customized sound mode).
Adjusting picture and sound
LTDN40V86MH
Picture TV
.
.
.
.
.
.
.
Picture mode Standard
Contrast
Brightness
Backlight
Saturation
Hue
Sharpness
Color temperature Normal
50
50
5
50
0
5
Move: Enter: OK Exit: EXIT
Game(a finely detailed picture)
Cinema(the brightness is decreaced)
Power saver(decrease the backlight for to save energy)
Hue – Lets you adjust the overall color of the picture (only supported
in TV/AV mode).
Sound TV
Sound mode Standard
English
Equalizer >>>
Balance
Digital audio language
0
Move: Enter: OK Exit: EXIT
— Press [ / ] to select between 3 different
pre-adjusted sound modes:Standard,music,and Clear voice. The
User mode preserves your preferred sound settings after using
the Equalizer available under the Sound submenu.
Sound mode
Set the users' mode of sound, press [ / ] button
to select the sound component of 120HZ, 500HZ, 1.5K, 5K, and 10K.
Press [
▲
/
▼
] button to weaken or enlarge the sound to the
proper value.
In TV mode, you can adjust:
In TV mode, you can adjust:
Zoom2 —Enlarges the picture but may crop the top and
bottom of picture. And no black bar on right and left.
Digital audio language In digital TV mode,allows you
to select the audio language for a program. In analog TV mode,
you can't see this option
Adjusting the Features
1Press MENU. The Main menu opens.
2Press or to highlight Features, then press ENTER or . The
Features menu opens
In TV mode, you can adjust:
EXIT
13
3Press or to highlight an option, then press or to access
the option, and press or to adjust the option. You can select:
ENTER
Caption settings – Lets you set up closed captions (CC). Settings
include Closed captions On/Off, Analog caption service, Digital
caption service and Digital caption options.
Closed captions - Lets you select On, Off or On during mute.
Analog caption service - Lets you select one CC server among CC-1,
CC-2,CC-3,CC-4,T-1,T-2,T-3 and T-4.
Digital caption service: Lets you select one cc server among CS-1,CS-2,
CS-3,CS-4,CS-5 and CS-6.
Digital caption options: Lets you adjust the CCfont, color, background
etc or you can keep default set by the broadcaster.
Changing channel settings LTDN40V86MH
Features TV
Caption settings >>>
Sleep time 0
Power on >>>
Power off >>>
V-Chip >>>
Change PIN >>>
Transpaerncy 0
OSD Timeout >>>
Move: Enter: OK Exit: EXIT
Sleep time –Lets you select auto sleep time among 0 to 180 minutes.
Power on – Lets you set up auto turn TV on time.
Power off –Lets you set up auto turn TV off time.
V-Chip – Lets you prevent your children from watching inappropriate
material on TV. When set, parental controls read the rating of the program
and deny access to programs that exceed the ratings level you select.
To watch programs that exceed the selected rating, you must enter a
password.
Hotel Function Lock TV
Move: Enter: OK Exit: EXIT
Off
Search Lock Off
User Save Lock Off
Picture Lock Off
Audio Lock Off
Features Lock Off
Installation Lock Off
DMP Lock Off
.
.
.
.
.
.
.
Function V-Chip TV
Move: Enter: OK Exit: EXIT
US TV Parental Guid... >>>
US MPAA Rating Select
Canadian English Rating Select
Canadian French Rating Select
.
.
.
.
.
.
.
Press the number buttons to enter the four-digit password. The
default password is 0532.
The V-Chip menu opens.
Access to V-Chip Menu
Program Block–
A–Rating Enable is on.
B–U.S. TV Ratings: You can choose TV ratings according
to the illustration on the screen.
C–The settings for U.S. Movie Ratings, Canada (English)
Ratings, and Canada (French) Ratings follow Step B. If
you want to block an unrated program, turn on this
function. You can select all the ratings listed in the
charts below.
Press or to highlight an option, then press or to access
the option. Press or to highlight a rating and press to
ENTER
ENTER
lock
and all other lower ratings.
the rating and all other higher ratings or unlock the rating and
U.S. TV ratings (age-based)
These ratings are determined by the Federal
Communications Commission (FCC).
TV-Y All children.
TV-Y7 Suitable for children 7 and older.
TV-G General audiences.
TV-PG Parental guidance suggested.
TV-14 Parental guidance strongly suggested.
TV-MA Mature audiences only.
U. S. TV ratings (content-based)
FV Fantasy violence.
V Violence.
S Sexual situations.
L Strong language.
D Suggestive dialog.
U.S. movie (MPAA) ratings
These ratings are determined by the Motion Picture
Association of America (MPAA).
G General audiences.
PG Parental guidance suggested.
PG-13 Suitable for children 13 and older.
R Parental guidance suggested for children
under 17.
NC-17 Not suitable for children under 17.
X Adults only.
Canadian French ratings
determined by La Régle du cinéma du Québec.
G General audiences.
8 ans+ Suitable for children 8 and older.
13 ans+ Suitable for children 13 and older.
16 ans+ Suitable for children 16 and older.
18 ans+ Adults only.
Canadian English ratings
These ratings are based on the Canadian Home Video
Rating System, determined by the Canadian Motion
Picture Distributors Association (CMPDA).
C Suitable for all children.
C8+ Suitable for children 8 and older.
G General audiences.
PG Parental guidance suggested.
14+ Suitable for children 14 and older.
18+ Adults only.
The V-Chip can block non rated programs as per "CEA-608-
Note:
E sec. L.3". If the option to block [None], [NR], [E]or [E] programs is
used in[U.S,TV ratings ]kk, [U.S.movie(MPAA) ratings]kk, [Canada
English ratings]kk or [Canada French ratings ]kk accordingly “unusual
resultsmay occur, and the unit may not receive emergency bulletins
or other types of programming:” · Emergency Bulletins (Such as EAS
messages, weather warnings and others) · Locally originated
programming · News · Political · Public Service Announcements ·
Religious · Sports · Weather.
Adjusting the Installation
To change the channel settings:
1Press MENU. The Main menu opens.
2Press or to highlight Installation, then press ENTER
installation menu opens.
3
or . The
Press or to highlight an option, then press or to access
the option, and press or to adjust the option. You can select:
ENTER
Language –You can select the menu's language among
English, French and Spanish.
Installation TV
Language English
Channels >>>
Time >>>
Source Labels >>>
Reset AV settings Start now
Move: Enter: OK Exit: EXIT
Channels –You can select the mode of RF input and
scan the available channels.
Time– Lets you set the exact time. You can setup
date,time,time zone and daylight saving.
Source Labels–Lets you name input source.
Reset AV settings –Change setting back to default.
(picture and sound only)
In TV mode, you can adjust:
Installation Channels TV
Move: Enter: OK Exit: EXIT
.
.
.
.
.
.
.
Autoprogram Start now
Installation mode Antenna
14
Changing channel settings
LTDN40V86MH
Change PIN–Change the password of the V-Chip function.
Transpaerncy–Adjust the transparency of menu.
OSD Timeout –The time it takes the OSD to disappear when
no operations are performed. You can change it from Off, 5
seconds, 10seconds, and 30seconds.
Note: Menu items that are not selectable are grayed out. Menus in this
manual are described in TV mode, unless otherwise indicated.
15
Remote control
General
Note: If the problem is not solved by using these troubleshooting
The picture has a few bright
or dark spots.
A few bright or dark spots on an
LCD screen is normal. It does not
Good picture, but no
sound.
Make sure that the sound is not
muted.
Make sure that the sound mode is
set to Stereo or Mono. For more
information, see “Selecting the
audio mode” on page 12.
Audio noise. Make sure that there is no
interference with infrared
equipment such as a cordless
telephone or headphones. Move
the infrared equipment away
from the TV to eliminate the
noise.
Problem Solution
Remote control does not
work.
Make sure that the TV power cord
is plugged in.
Make sure that there are no
obstructions between the remote
control and the remote control
sensor on the front of the TV.
Make sure that the batteries are
installed correctly. For more
information, see “Installing
remote control batteries” on
page 6.
Replace the batteries. For more
information, see “Installing
remote control batteries” on
page 6.
Trouble programming your
existing universal remote
control.
See instructions and a table of
common codes in “Programming
a universal remote control to
work with your TV” on page 7.
Codes are subject to change. For
up to date codes, go to
www.dynexproducts.com.
Replace the batteries. For more
information, see “Installing
remote control batteries” on
page 6.
Refer to the User Guide that
accompanied your universal
remote control and contact the
manufacturer if problems persist.
Problem Solution
Problem Solution
One or more channels do
not display.
Make sure that the channels are
not blocked. For more
information, see “Setting parental
controls” on page 13.
Password is lost. Enter 0532 to access parental
controls, then set a new
password. For more information,
see “Setting parental controls” on
page 13.
Some settings cannot be
accessed.
If a setting is grayed, the setting is
not available in the current video
input mode.
TV cabinet creaks. When the TV is in use, the
temperature rises naturally and
may cause the cabinet to expand
or contract which can cause a
creaking noise. This is not a
malfunction.
Control buttons on the TV
do not work.
Disconnect the power cord, wait a
few seconds, then reconnect the
power cord and turn on the TV.
Troubleshooting
Before calling for service, check the following information for possible
solutions to problems you may experience. If none of these solutions
Caution: Do not try to repair the TV yourself. Refer all servicing to
Video and audio
Problem Solution
No picture (screen is not lit)
and no sound.
Make sure that the power cord is
plugged in.
Press POWER on the TV or the
remote control.
Make sure that the correct video
input source is selected. For more
information, see “Selecting the
video input source” on page 9.
Try another channel. The station
may be experiencing problems.
Dark, poor, or no picture
(screen is lit), but sound is
good.
Adjust the brightness. For more
information, see “To adjust the
picture:” on page 12.
Make sure that the correct picture
mode is selected. For more
information, see “To adjust the
picture:” on page 12.
Make sure that the antenna or
cable TV is connected correctly
and securely. For more
information, see “Connecting an
antenna, cable TV, or satellite TV
box” on page 8.
No color, dark picture, or
color is not correct.
Adjust the color saturation. For
more information, see “Adjusting
the picture” on page 12.
Only snow (noise) appears
on the screen.
Try another channel. The station
may be experiencing problems.
Make sure that the antenna or
cable TV is connected correctly
and securely. For more
information, see “Connecting an
antenna, cable TV, or satellite TV
box” on page 8.
Dotted lines or stripes
appear on the screen.
Adjust the antenna.
Move the TV away from noise
sources such as cars, neon signs,
or hair dryers.
Double images. Try using a highly directional
outdoor antenna or cable TV.
Troubleshooting LTDN40V86MH
16
Weight and dimensions shown are approximate.
Legal notices
FCC Part 15
This device complies with Part 15 of the FCC Rules. Operation of this
product is subject to the following two conditions: (1) this device may
not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired
operation.
This equipment has been tested and found to comply within the limits
for a class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
that to which the receiver is connected.
Consult the dealer or an experienced technician for help.
FCC warning
responsible for compliance with the FCC Rules could void the user’s
authority to operate this equipment.
Cables
Connections to this device must be made with shielded cables with
metallic RF/EMI connector hoods to maintain compliance with FCC
Rules and Regulations.
Canada ICES-003 statement
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numerique de la classe B est conforme a la norme NMB-003
du Canada.
Standard Television Receiving Apparatus — Appareil de réception
télévision ordinaire, Canada BETS-7 / NTMR-7
HDMI
trademarks or registered trademarks of HDMI Licensing LCC.
TV type LCD
TV panel 39-inch TFT LCD
TV system NTSC-M, ATSC
Receiving channels VHF: 2 - 13
UHF: 14 - 69
CATV: 1 - 125
CADTV: 1-135
DTV: 2-69
Audio multiples BTSC system
Audio out 7 W x 2
Power requirement AC 120 V, 60 Hz
Power consumption 150 W (With Max backlight)
Dimensions
(W × H × D with stand) 36.14 × 24.41 × 11.22 inches
(918× 620× 285 mm)
Weight 27.78 lbs. (12.6 kg)
Input terminals Composite video/L and R audio (1)
Component video/L and R audio (2)
HDMI (3)
VGA/audio (1)
ANT/Cable In (1)
Output terminals Digital Coaxial Audio (1)
Headphone (1)
Control terminals SERVICE PORT (2)
Maintenance
Just like with any other household appliance, the performance and
life-expectancy of your TV depends on how well you maintain it. Follow
the procedures described here to clean the TV case and the LCD screen.
Cautions:
disconnected from the power outlet before cleaning the TV.
Never spray or pour any liquid directly onto the screen or the case.
Cleaning
Clean your TV with a soft, dry cloth. If surfaces are extremely
dirty, use a soft cloth dampened with a small amount of
non-ammonia, non-alcohol-based, non-abrasive detergent
solution.
Clean the screen with a clean, soft, lint-free cloth. If additional
cleaning is necessary, apply a small amount of non-ammonia,
non-alcohol-based, non-abrasive detergent solution to the cloth.
Specifications, Legal notices
LTDN40V86MH
USB(1)
Component Input
Video Input
480I/60Hz
NTSC-M
480P/60Hz
720P/60Hz 1080I/60Hz
1080P/60Hz
PC Input VGA (640 × 480 60Hz )
SVGA (800 × 600 60Hz)
SGA (1024 × 768 60Hz)
HDMI Input RGB/60Hz )867× 4201 006× 008 084× 046(
YUV/60Hz (480I 480P 720P 1080I 1080P)
Wall Mounting
VESA Size
Wall-mount
screws pattern
200 X 200 (mm)
M6X25 (4 pc)
17
Adjusting hotel settings
To adjust hotel settings:
1Press MENU. The Main menu opens.
2Press or to highlight SOUND, then press ENTER or , audio
3
HOTEL MODE —Allows installer to active or disable hotel options.
TV ON SETTING —Allows installer to set up of initial options each
Press or to highlight an option, then press or to access
the option, press or to select a value and press to adjust
the option. You can select:
ENTER
menu opens. Press or to highlight balance, use or to
adjust to zero, then press the number buttons to enter the three-
digit password 5 4 8. The Hotel Settings Menu opens.
Note: Please redo above step if fail when opening Hotel Settings Menu.
ENTER
: Hotel options are active.
On
: Hotel options are disabled.
time a guest turns TV on.
On Volume
In ON mode, can be adjusted from 0 to 100.ON VOLUME VALUE
On Source
Input options. Choises include
will remember previous input source.
LAST
TV,Video,Component1,
on source will activate selection and
TV ON CHANNEL ON
CHANNEL NUMBER.
—Allows installer to set up desired
On Channel Number
channel when TV is turned on. If no desired channel is requested
ON CHANNEL
—Allows installer to select one of three options.
Power On
Choices are and
LAST, ON Standby.
: TV will return to whatere operation it was in before power
LAST
out.
ON : TV will turn on when power is restored.
Standby : TV will be activated but not turned on.
—Allows installer to active or disable basic settings.
Basic Setting
ON : TV picture defaults to Normal viewing mode, Normal Audio
OFF : Installer can go to and adjust settings.
and Zoom Aspect is full screen.
User Save Lock
FUNCTION Lock —Allows installer to lock the following functions.
—Locks key pad.
kB lock
OFF: Usable.
ON : Locked down (disabled).
—Locks key pad.
Search Lock
OFF: Usable.
ON : Locked down (disabled).
—Locks hotel guest adjustment.
User Save Lock
OFF: Menu features can be adjusted by hotel guest and be
ON
remembered in TV memory.
factory default settings.
LTDN40V86MH
Hotel Settings
Sound TV
0
Move: Enter: OK Exit: EXIT
Sound mode Standard
Equalizer >>>
Balance
Balance 0
Hotel TV On Setting TV
Move: Enter: OK Exit: EXIT
On Volume Off
On Source Last
Logo HISENSE
Power On Standby
Basic Seetting Off
.
.
.
.
.
.
.
Hotel Function Lock TV
Move: Enter: OK Exit: EXIT
Off
Search Lock Off
User Save Lock Off
Picture Lock Off
Audio Lock Off
Features Lock Off
Installation Lock Off
DMP Lock Off
.
.
.
.
.
.
.
Hotel Function Lock TV
Move: Enter: OK Exit: EXIT
KB Lock Off
Search Lock Off
User Save Lock Off
Picture Lock Off
Audio Lock Off
Features Lock Off
Installation Lock Off
DMP Lock Off
.
.
.
.
.
.
.
—Locks Picture adjustments in menu.Picture Lock
OFF: Picture adjustments in menu are allowed by user.
ON : Locks all picture adjustments.
—Locks Audio adjustments in menu.
Audio Lock
OFF: Audio adjustments in menu are allowed by user.
ON : Locks all audio adjustments except Balance.
—Allows installer to choose one of three options. Choices
LOGO
are and .
: No logo when TV is turned on. TV goes directly to source.
OFF
: Displays Hisense TV logo.
HISENSE
: Displays welcome logo.
WELCame
OFF, HISENSE WELCOME
Component2,PC(computer),HDMI1,HDMI2,HDMI3 and DMP.
18
CLONE
(copy) settings to any additional units you are installing.
First plug in USB driver to unit that is already set up. A---
Select READ OUT which brings up cloning function.B---
Select YES to clone (copy). When complete, TV will show uploadC---
success. Hotel Menu will close automatically.
MAX VOLUME —Allows installer to adjust max volume from 0 to 100.
: TV will stay on with no signal.OFF
MIN VOLUME —Allows installer to adjust minimum volume from 0 to 100.
The volume value can be input by digit-number buttons on remote.
The volume value can be input by digit-number buttons on remote.
AUTO Standby
: TV goes to Standby mode when there is no signal after 15 mimutes.ON
hotel settings menu.
CHANNEL SETTINGS —Allows access to channel setting without exiting
In channel setting mode, Allows edit and Program Guide Edit
remapping and editing of channels available. Using the color keys
installer can change channel position and name.
ON : No detail information on channel.
info may also be available depending on provider.
LTDN40V86MH Hotel Settings
Input Selection
OFF: Locked down (disabled).
ON : Usable.
Info Lock
OFF: Programing name and description (if available) are
displayed when info button on remote is touched. Programing
Feature Lock—Locks Feature menu adjustment in menu.
—Locks Installation menu adjustment in menu.
—Locks DMP menu adjustment in menu.
Installation Lock
DMP Lock
V-Chip—Locks V-Chip function in menu.
Hotel mute—
—
Hotel Channel Setting TV
Select: Enter: OK Exit: EXIT
Digital Page2/1
NO# Name PHY. Program Skip
Rename: Skip: Copy: Delete: Insert:
23 5-1
23 5-2
23 5-3
23 5-4
17 17
29 29
45 45
57 57
69 69-1
69 69-2
1
2
3
4
5
6
7
8
9
10
CLONING OPTION 2.
Take loaded USB drive to next unit, plug in next installation
A---
Plug in loaded USB drive.
B---
Turn TV on.
C---
Go to Menu.
D---
Go to Audio menu.
E---
Go to Balance. Use arrows to adjust to zero.
F---
Enter access code 548 with remote number key. Hotel menu
G---
unit (You do not need to have sources connected).
Go to clone near bottom.
H---
opens.
Choose option Write In. Hit Enter on remote. Cloning option
J---
will appear on screen.
Select Yes. System will acknowledge download success. TV
k---
will be cloned.
SSID setting—Set or reset SSID code for Pro:Idiom decording.
Set SSID
: Reset to factory default code.
yes
—Enter new SSID code.
Reset SSID—Reset SSID code to factory default value.
: Maintain current settings.
No
: TV is muted. User can not adjust volume.
Allows installer to mute TV speaker.
ON
: TV is not muted. User can adjust volume.
OFF
CLONING OPTION 1.
Plug in new TV.
A---
Plug in loaded USB drive.
B---
Turn TV on.
C---
Press menu.
D---
Key in numbers 2 5 6 6 3 on remote.
E---
Cloning option will appear on screen.
F---
SW Version—shows current software version information.
