Hisense Electric LCDD0020 Part15 Subpart B-LCD Monitor User Manual

Hisense Electric Co., Ltd. Part15 Subpart B-LCD Monitor

Contents

W9HLCDD0020_User Manual 1

Download: Hisense Electric LCDD0020 Part15 Subpart B-LCD Monitor User Manual
Mirror Download [FCC.gov]Hisense Electric LCDD0020 Part15 Subpart B-LCD Monitor User Manual
Document ID1698995
Application IDC9ygdUIGdkx4zx0NepS/MQ==
Document DescriptionW9HLCDD0020_User Manual 1
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize276.26kB (3453249 bits)
Date Submitted2012-05-16 00:00:00
Date Available2012-05-17 00:00:00
Creation Date2012-01-13 16:04:27
Producing SoftwareAcrobat Distiller 7.0.5 (Windows)
Document Lastmod2012-01-13 16:04:27
Document Title.. -User Manual.pdf
Document CreatorPScript5.dll Version 5.2
Document Author: alan

LOZSLLF’SE
[0118ng Luca-esn-asuasgu@a:)!/uas
LuOD'BSn—BSUBSN'MMM
“segoummej 59mm; med opmasuoo
‘|enu2u1 else sJuaLuepgualap ea| Hem/ma; |a Jezmm ep se1uv
OIHVflSfl "IEICI 1VflNVW
HOZMQVfl EI:II'I SI NOIlVAONNI
302»sz asuang
Hisense F42K20E
INNOVATION IS LIFE F46K20E
USER MANUAL
Before using the TV, please read this manual
thoroughly and retain it for future reference.
www.hisense—usa.com
service@hisense-usa.com English
ES»J115201
CAUTION
RISK OF ELECTRIC SHOCK
DONOTOPEN
CAUTloNITO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR
BACK) NO USER-SERVICEABLE PARTS
INSIDE. REFER SERVICING T0 QUALIFIED
SERVICE PERSONNEL
FCC Statement
The lightning flash with arrowhead symbol, Within an
equilateral triangle is intended to alert the user to the
presence of uninsulated dangerous voltage within the
product's enclosure that may be of sufficient magnitude
to constitute a risk of electric shock
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in
the literature accompanying the appliance.
Energy Star
NOTE:
This equipment has been tested and found to comply with
the limits for a class B digital Device, pursuant to part 15
of the FCC Rules, These limits are designed to provide
reasonable protection against harmful interference in a
residential installation This equipment generates, uses and
can radiate radio frequency energy and, if not installed and
used in accordance With the instructions, may cause harmful
interference to radio Communications. However, there is
no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following
measures:
‘ Reorient or relocate the receiving antenna.
‘ Increase the separation between the equipment and the
receiver.
f Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected
’ Consult the dealer or an experienced radio/TV technician
for help.
6 WARNING
The manufacturer is not responsible for any radio or TV
interference caused by unauthorized modifications to
this equipment. Such modifications could void the user's
authority,
This TV incorporates High-Definition Multimedia interface (HDMl‘l') technology
HDMl, the HDMl logo and HigheDefinition Multimedia interface are trademarks
Your Hisense TV is ENERGY STAR ®
qualified in the “Home" mode. It meets
strict energy efficiency guidelines set
by the US. Environmental Protection
Agency and Department of Energy,
ENERGY STAR is a joint program of
these government agencies, designed
ENERGY R
to promote energy efficient products
and practices Changes to certain features, settings, and
functionalities of this TV (i e TV Guide, Picture, Sound) can
increase or change the power consumption. Depending upon
such changed settings, the power consumption may exceed
the limits required for the ENERGY STAR qualification in the
“Home" made
i? NOTE
Where the MAINS plug or an appliance coupler is used
as the disconnect device, the disconnect device shall
remain readily operable
HEII'I'II~
or registered trademarks of HDMl Licensing LLC
Hisense and associated logos where applicable are registered trademarks of Hisense Group in the United States and/or other
countries. All othertradernarks are property of their respective owners 2011 H
Manufactured under license from Dolby Laboratories Dolby and the doubleeD
' Specifications subiect to change Without notice
oy
MP
isense USA, Corporation All Rights Reserved.
symbol are trademarks of Dolby Laboratories.
CHILD SAFETY
it Makes A Ditt erence How nd Where
ou Use Your Flat Panei Display
CongratuIations on your purchase! As you enjoy your new product, p|ease
keep these safety tips in mind:
THE ISSUE
- The home theater entertainment expeiience is a grow rig trend and targer
Hat panei dispioys are poouiar purchases t owever, Itot ponei dispioys
are not otwoys supported on the proper stands or ns’aiied according to the
mOHuIGC’drer's recommendations
- iia' paret disptoys that are inappropriateiy situated on dresse's, bookcases,
sheives, desks, speakers, chests oi co'ts may taii over and cause ini'ury
THIS MANUFACTURER CARES!
o The censu'ne' eiectrorics industry is committed to making home entertainment
enioyabie and sole
TUNE INTO SAFETY
- One size does NOT tit ott iottow ‘he monutacturer’s recommenoations
tor the sate instattotion and use oi your Hot ponet disptay
' Caretuiiy read and understand cit enctosed instruct ons tor proper use at
this product
- Don’t attow chitdren to ctimb on or ptay With furniture and teteyis'on sets
0 Don’t piace Hat panei dispicys on turniture that can eastiy be useo as steps,
such as a chest ot drawers
' Remember that ch idren can become exCited whiie watching a prog'on'i,
espemaiiy on a ”iarger than hte” tiat panei dispioy Care shouid be taken to
piece or iHS'GH MC dispiay where t' cannot be pushed, puiied over,
or knocked down
- Care shouid De “aken to route att cords and cabies connected to the lioi
ponei dispicy so not tney cannot be puiied or grabbed by curious ch idren
WALL MOUNTING: IF YOU DECIDE TO WALL MOUNT
YOUR FLAT PANEL DISPLAY, ALWAYS:
- Use a rnount that has been recommended by the dispiay manutacturer
one/or iisted by an independent iaborate'y (such as UL, CSA, ETL)
' Foiiow aii instructions supphed by the dispiay and waii mourt manutac'urers,
- it you have any doubts about your obiiity to soteiy instaii your tiot ponei
dispioy, contact your retoiier about pvotessionoi ti‘SiOHGitOft ("Cm-smi‘m‘awm
- tvtoke sure tnot tne woii where you are mounting tne dispioy is appiopiiote www.(E.org/suIety
Some wait mounts are not designed to be mounted to waits With steei
studs or oid Cinder biock construction it you are unsure, contact a
p'otessionei instaiier
' A rnini'nurn at two peopie are requi'ed tor instaiiation Hat oanei dispiays
can be heavy
II
F‘P’SJ‘F‘P’NT‘
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near Water
Clean only with dry cloth.
Do not block any ventilation openings. Install in accordance
With the manufacturei‘s instructions.
Do not install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
. Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades With
one wider than the other. A grounding type plug has two
blades and a third grounding prong The wide blade or the
third prong are provided for your safety if the provided
plug does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet
10 Protect the power cord from being walked on or pinched
11
12. Use only with cart, stand, tripod,
13.
particularly at plugs, convenience receptacles, and the
point where they exit from the apparatus.
Only use attachments/accessories
specified by the manufacturer
bracket, or table specified by the
manufacturer, or sold with the
apparatus. When a cart is used, S3125A
use caution when moving the cart/
apparatus combination to avoid injury from tip-over.
Unplug this apparatus during lightning storms or when
unused for long periods of time.
14. Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any Way, such as power-supply cord or plug
is damaged, liquid has been spilled or objects have fallen
into the apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or has been
dropped
15. Apparatus should not be exposed to dripping or
16
17
18.
splashing, and objects filled With liquids, such as vases,
should not be placed on the apparatus
An outside antenna system should not be located in the
vicinity of overhead power lines or other electric light or
power Circuits, or where it can fall into such power lines
or circuits When installing an outside antenna system,
extreme care should be taken to keep from touching
such power lines or circuits, as contact with them might
be fatal.
Do not overload Wall outlets and extension cords, as this
can result in a risk of fire or electric shock.
Do not push obiects through any openings in this unit,
as they may touch dangerous voltage points or short out
parts that could result in fire or electric shock. Never spill
or spray any type of liquid into the unit.
19. if an outside antenna or cable system is connected to the
unit, be sure the antenna or cable system is grounded to
provide some protection against voltage surges and built-
up static charges, Section 810 of the National Electrical
Code, ANSl/NFPA 70, provides information with respect
to proper grounding of the mast and supporting structure,
grounding of the lead—in wire to an antenna discharge
unit, size of grounding conductors, location of antenna
discharge unit, connection to grounding electrodes, and
requirements for the grounding electrode.
EXAMPLE or ANYENNA GROUNDlNG As pm we
NATlONAL ELECTRlCnL cons
ANTENNA
[new iN WlRE
ANTENNA
DlSCHARGE uNlT
(NkC SkCl ioN siczci
GaouNolNG coNoucroRs
lNEC SECTlON tam—217
FlFCTRlc sFvacF
EuulVMENT .
NEC NATIONAL cRouND CLAMPS
' u— Vow/ER sERvicE GROUNDlNG
ELECTR‘CAL CODE ELECTRooE sverM
szssaA iNgc ART 250 PAW Hi
20. When replacement parts are required, be sure the service
technician uses replacement parts specified by the
manufacturer or those that have the same characteristics
as the original part. Unauthorized substitutions may result
in fire, electric shock or other hazards.
21 Upon completion of any service or repairs to this unit,
ask the service technician to perform safety checks to
determine that the unit is in proper operating condition.
22. When you connect the product to other equipment, turn
off the power and unplug all of the equipment from the
wall outlet. Failure to do so may cause an electric shock
and serious personal injury Read the owner's manual of
the other equipment carefully and follow the instructions
when making any connections
23. Sudden high volume sound may cause hearing or
speaker damage When you use headphones, (if the unit
is equipped with a headphone jack) keep the volume at a
moderate level. If you use headphones continuously with
high volume sound, it may cause hearing damage.
CDNDENSATION:
Moisture Will form in the operating section of the unit if the
unit is brought from cool surroundings into a warm room or
if the temperature of the room rises suddenly. When this
happens, unit's performance Will be impaired. To prevent
this, let the unit stand in its new surroundings for about an
hour before switching it on, or make sure that the room
temperature rises gradually
Condensation may also form during the summer if the unit is
exposed to the breeze from an air conditioner. In such cases,
change the location of the unit.
Ill
HOW TO HANDLE THE LCD PANEL:
f Do not press hard or jolt the LCD panel. It may cause the
LCD panel glass to break and injury may occur
" if the LCD panel is broken, make absolutely sure that you
do not touch the liquid in the panel. This may cause skin
inflammation
If the liquid gets in your mouth. immediately gargle and
consult with your doctor. Also. if the liquid gets in your eyes
or touches your skin, consult with your doctor after rinsing
for at least 15 minutes or longer in clean water.
Possible Adverse Effects on LCD Panel:
if a fixed (non—moving) pattern remains on the LCD Panel
for long periods of time, the image can become permanently
engrained in the LCD Panel and cause subtle but permanent
ghost images. This type of damage is NOT COVERED BY
YOUR WARRANTY. Never leave your LCD Panel on for long
periods of time while it is displaying the folloWing formats or
images:
” Fixed Images, such as stock tickers, video game patterns,
TV station logos, and websites.
’ Special Formats that do not use the entire screen For
example, viewing Ietterbox style (16:9) media on a normal
(4:3) display (black bars at top and bottom of screen); or
viewing normal style (4:3) media on a widescreen (16:9)
display (black bars on left and right sides of screen).
The following symptoms are not signs of malfunction
but technical limitation. Therefore we disclaim any
responsib ty for these symptoms.
” LCD Panels are manufactured using an extremely high
level of precision technology. however sometimes parts
of the screen may be missing picture elements or have
luminous spots.
This is not a sign ofa malfunction.
' Do not install the LCD Panel near electronic equipment that
produces electromagnetic waves. Some equipment placed
too near this unit may cause interference.
C Effect on infrared devices — There may be interference
while using infrared devices such as infrared cordless
headphones
Declaration of Conformity
This device complies with part 15 of the FCC Rules
Operation is subject to the followmg two conditions:
(1) This device may not cause harmful interference and (2)
This device must accept any interference received, including
interference that may cause undesired operation.
IV
End of life directives
Your TV also contains material that can be recycled and
reused. For disposal or recycling information, contact your
local authorities or the Electronic industries Alliance at
www eia.org to find a recycler in your area.
Non-active pixels
The LCD panel contains almost 3 million thin film transistors.
which provide exceptionally sharp video quality. Occasionally,
a few non-active pixels may appear on the screen as a
fixed black (in the case of a dead pixel), blue, green, or red
point These non—active pixels do not adversely affect the
performance of your TV, and are not considered defects
Power source
TO USEAC POWER
1. The power cord is attached to the TV at the factory.
2. Connect the AC cord into an AC outlet.
6 WARNING
Do not connect this unit to the power using any device
other than the supplied AC cord. This could cause fire.
electrical shock, or damage
Do not use with a voltage other than the power voltage
specified This could cause fire, electrical shock, or
damage
0) CAUTION
When this unit is not used for a long time. (e.g.. away on
a trip) in the interest of safety. be sure to unplug it from
the AC outlet.
Do not plug/unplug the AC cord when your hands are
wet. This may cause electrical shock.
Accessories List....
Installing the Stand ..
Installing a Wall—mount Bracket ........................................
When Installing the TV Against a Wall or Enclosed Area .
Viewing the Control Panel ................................................
Viewing the Remote Control ..................
Installing Batteries in the Remote Control
Making Connections ........................................................................................ 8
Turning your TV on or off...
Selecting the Input Source
Changing Channels / Volume
Shortcuts Instructions ............
Turning your TV for the First Time
To Use the Menu ..
Using the TV Menu..
Using the Video Menu
Using the Audio Menu
Using the Setup Menu....
Using the Parental Menu
Trouble Shooting ............................................................................................ 18
General ........................................................................................................... 20
..3
..4
Gett'ng Started
Accessories List
mm mm
ED
eeeeee a ease
"until
Installing the Stand
1. The LCD display is very fragile, and must be protected at all times when removing the base stand. Be sure that no hard or
sharp object, or anything that could scratch or damage the LCD display, comes into contact with it. DO NOT exert pressure
on the front of the TV at any time because the screen could crack.
2. For tabletop use, the TV must be attached to the provided stand as shown on this page.
Be sure to disconnect the AC power cord before installing a stand or wall-mount brackets.
Use a covered table or bench to lay the TV on and handle the TV carefully to prevent damage to the TV screen or cabinet
during assembly.
Follow the illustrations below to complete the installation steps:
0 Insert the stand column into the base plate, aligning the ridge on C Secure the stand column to the stand cover Vertically with the
the column with the groove in the base plate. two ScrewsA(M4x12).
0 Making sure the FRONT oi stand oolumn match the FRONT of 0 Secure the stand coiumn to the stand cover horizontally with the
base plate, two Screws B (STAXM),
0 Secure the stand column to the base plate with the four Screws
A(M4x12).

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
XMP Toolkit                     : 3.1-701
Producer                        : Acrobat Distiller 7.0.5 (Windows)
Create Date                     : 2012:01:13 16:04:27+08:00
Modify Date                     : 2012:01:13 16:04:27+08:00
Metadata Date                   : 2012:01:13 16:04:16+08:00
Creator Tool                    : PScript5.dll Version 5.2
Page Image Page Number          : 1, 2
Page Image Format               : JPEG, JPEG
Page Image Width                : 256, 256
Page Image Height               : 256, 256
Page Image                      : (Binary data 7034 bytes, use -b option to extract), (Binary data 6602 bytes, use -b option to extract)
Document ID                     : uuid:63111F30BD3DE1118EA3D30E581E0D8C
Instance ID                     : uuid:5e745ee0-6523-4eda-985a-d7bfdcef69be
Derived From Instance ID        : uuid:05d23648-97ad-4254-9b9e-97127878f93d
Derived From Document ID        : xmp.did:AC5F7462BD3CE111B156E7539F635E54
Derived From Rendition Class    : proof:pdf
Doc Change Count                : 14823
Format                          : application/postscript
Title                           : .. -User Manual.pdf
Creator                         : alan
Page Count                      : 8
Author                          : alan
EXIF Metadata provided by EXIF.tools
FCC ID Filing: W9HLCDD0020

Navigation menu