Hisense Electric LCDD0020 Part15 Subpart B-LCD Monitor User Manual W9HLCDD0020 3

Download:
Mirror Download [FCC.gov]
Document ID	1699026
Application ID	C9ygdUIGdkx4zx0NepS/MQ==
Document Description	W9HLCDD0020_User Manual 3
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	346.54kB (4331778 bits)
Date Submitted	2012-05-16 00:00:00
Date Available	2012-05-17 00:00:00
Creation Date	2012-01-13 16:10:59
Producing Software	Adobe PDF Library 9.9
Document Lastmod	2012-01-13 16:11:04
Document Title	W9HLCDD0020_User Manual 3
Document Creator	Adobe InDesign CS5.5 (7.5)

Turning your TV on or off
Shortcuts Instructions
To turn your TV on or off (standby mode):
1. Connect the power cord to the connector on the back of
the TV. When connecting the power cord to the connector
of the TV, make sure the power cord is fully inserted in
its place. Bad contact may cause high temperature of the
connector and the risk of fire or other damages
2. Plug the power cord into an AC power outlet.
3. Press [POWER] button YourTV turns on.
4. Press [POWER] button again to turn off your TV. When
you turn off your TV, it goes into standby mode.
@ WARNING
When your TV is in standby mode. it is still receiving
power. To completely disconnect power, unplug the power
cord.
l? NOTE
If your TV does not receive an input signal for several
minutes. it automatically goes into standby mode.
Selecting the Input Source
The first time you turn on your TV. you must select the TV
signal source. YourTV stores this information, so you do not
need to change the TV signal source unless it changes. For
example, you change from an outside antenna to cable TV.
To select the video input source:
1. Turn on your TV, then press [lNPUT] button on the remote
or on the TV. The input Source menu opens.
2. Press [A/V] button to highlight the input source. then
press [ENTER] button.
3. Press [POWER] button again to turn off your TV. When
you turn off your TV. it goes into standby mode.
Changing Channels I Volume
1. Press the [CH NV] (or [OH +/—]) on the TV/remote control
to change the channel.
2. Press the [VOL NV] (or [VOL +/-]) on the TV/remote
control to ad]ust the volume.
3. Press the numeric buttons on the remote control to
display the corresponding channels.
B NOTE
Changing the channels can also be achieved by directly
entering the channel number using the numeric keys on
the remote control. If you are entering a two or three digit
channel number. the time between key presses should be
less than 3 seconds
Aspect - Select the screen aspect ratio from Normal, Wide.
Zoom and Cinema
Normal: The original 4 3 aspect
ratio («33:1 signal) is preserved, 0
so black bars are added to the left
and right of the image. Standard TV
broadcasts are displayed with a 4 3
aspect ratio.
Wide: When watching a standard
broadcast or full-frame movie in
this mode, the display image is O O
stretched proportionately to fill Q
the TV screen When watching a 0
Widescreen (1.78 1 signal) program
or movie. the display image fills the
TV screen.
Zoom: Stretch the 4:3 aspect ratio
image vertically and horizontally to
fill the screen at 1.’l 78 aspect ratio.
Cinema: Stretch the 4-3 aspect ratio U
image vertically and horizontally to
fill the screen at 1:2 35 aspect ratio.
f?
Dot-to-Dot: Use the function to see
the full image without any cutoff,
when VGA slgnai ls input
Picture - Press to set the picture mode. It can be set as
Standard. Cinema. User and Vivid. This mode achieves
a certain image display effect by setting the brightness.
contrast and color etc
Sound - Press to set the sound mode. lt can be set as
Standard, Speech, User and Music.
Mute - Press to turn the sound off, press this button again
to turn the sound back on. This function is used to switch off
sound temporarily.
Sleep - It can set the TV to let it enter into the Standby
state automatically. Press this button repeatedly to select
the proper sleeping clock mode, and the clock tells you the
remaining time before the TV enters Standby state.
Guide - Display the information banner The information
including channel number. channel name, current system
time. tuner mode, audio stream. video format. audio
language, closed caption mode, parental locks rated,
program details. etc.
Turning_your TV for the First Time
The Initial Setup menu appears the first time you turn on the
TV, It will assist you to specify the Energy Saving mode.
1. Connect your TV's power cord to a power outlet, then
press power. The Initial Setup screen opens.
Welcome
Welcome to use the leerd lor
lnlllal Setu 1
Please press [ENTER] to start
the leera
2. Please press [ENTER] to start the wizard. then press
[A/V] button to select your language. press [ENTER].
mm».
Lanuae
Espanal
Please sei uur language
Frames
3. Please press [A/V] button to select your Picture
Mode: Home mode or Retail mode. Your Hisense TV is
ENERGY STAR ® qualified in the “Home" mode. Then
press [ENTER] to confirm.
If you select Retail Mode, a message appears "Are you
sure you want retail mode?" Select “YES“ to continue, or
select “NO" to change your selection.
Horne mode
Retell mode
Choose. your re Mude:
Home mode delault sefllllgs are
recommended for lnrnome use
ENERGY STAR c quallfied.
Retarl models lnlended tar inrslore
dlsplay
selerv FNT . Next
Are you sure you want retell mod
EN l :R N:
l3
4. Please Press [A/V] button to select your tuner mode.
Antenna or Cable. Press [ENTER]. please connect cable
and/or antenna. press [A/V] button to select Scan or
Skip Scan. If you select scan, it may take several minutes
to scan channels, If you skip scan, the channel scan
could be performed in the Menu.
Cable
Please select your tuner mode
antenna
start channel scan new"
It you sklp thls step. the channel
scan could be pertunned in Menu
TER Nrgul
channel 0
i: Min
DTV a
Search Type Antenna
To Use the Menu
1 Press the [Menu] button to open the main menu.
2 Press [A/V] to select a menu option. then press
[>IENTER] to enter the menu.
3 In each menu, you can:
f Press [A/V] to select an item,
" Press [] to adjust the value, or
a Press [>/ENTER] to enter the submenu.
‘ Press [
MTS Stereo
Audlo Language Engllsh
Arum-1 MENJ Back.
You can adjust:
Tuner Mode - Select the TV signal source. You can select
Antenna or Cable.
Channel Scan - Scans for channels that have signals and
stores the channels information in memory.
Channel 0 SearchType Antenna
8°lr
nlENu Bonk
DTV: The scanned TV program in digital signals.
TV: The scanned TV program in analog signals.
Channel Skip - You can cancel a channel stored in memory.
Analog
Analog
Analog
Analog
Analog
Analog
Analog
Analog
thc Bork
l? NOTE
When you press [CH /\/V] button, your TV skips the
channel you cancelled. You can still tune to the channel
using the number buttons on the remote control.
MTS - Select the deiault audio stream, you can select Mono,
Stereo or SAP (Second Audio Program).
SAP: Debending on the particular program being
broadcast, you can listen to a foreign—language translation.
Audio Language - Select the audio language for a program.
l? NOTE
Only available in digital TV signal.
Using the Video Menu
Using the Audio Menu
Picture Mode
Brightness
Contrast
Saturation
H u E
Sharpness
ColorTemperature
Energy Saving
Advanced Video
eplqu
Standard
On
AnlIII—T MUM B. .
You can adjust:
Picture Mode -Adjust the Picture Mode. You can select
Standard, Cinema, User or Vivid.
Brightness - Increase or decrease the brightness of the
picture. Increasing the brightness can add more light to dark
areas of the picture. while decreasing the brightness can
add more darkness to light areas of the picture.
Contrast - Increase or decrease the contrast of the picture.
Increase the contrast to adjust the white areas of the picture
or decrease the contrast to adjust the black areas of the
picture.
Saturation -Adjust the intensity oflhe colors.
HUE -Adjust the overall color of the picture.
Sharpness - You can increase the sharpness level for
clearer images or decrease the sharpness level for smoother
images.
Color Temperature - Change the color temperature. You
can select the color temperature from three options: Cool,
Standard or Warm.
Advanced Video -Access advanced video settings such as
DNR, Adaptive Luma Control and Flesh Tone.
DNR: Select to reduce the noise level of connected
equipment: Off, Low, Standard or Strong.
Adaptive Luma Control: According to the content at
picture, it can adjust brightness automatically.
Flesh Tone: When this feature is “on" state. the TV could
be the basis of image content. for color correction,
Otf
Olf
Adaptive Litma Control
Flesh Tone
MUM Baal.
l5
Balance
Surround Sound
Equalizer
SPDlF Type
Auto Volume Control
Amut—It MENL
You can adjust:
Balance -Adjust the volume of the left and right speakers.
Sound Surround - simulates surround sound and enhances
bass response.
Equalizer - Soften or enhance the sound at specific
frequency points.
‘lZOHZ EUOHZ ‘lSKHZ 5KHZ ‘lOKHZ
ifldh ‘ ' ‘ ‘ '
Ddb l ' l lll
i H
0 0
menu Balk
SPDIF Type - Send digital audio to an external audio
system. You can select PCM, Dolby Digital or Off.
PCM: PCM outputs two channel audio regardless oi the
input Iormat.
Dolby: When the data stream carries Dolby signal, digital
SPDIF outputs Dolby data stream. When the data stream
carries no Dolby signal, it transports PCM data stream.
Auto Volume Control - Automatically adjusts volume to a
consistent level; attenuates loud passages.
B NOTE
Via SPDIF Type, you can choose the digital audio out
type. If Auto Volume Control is “On", that means audio out
control is activated.
Using the Setup Menu
050 Language
osc Time oiii
Screen Mode
English
is sec
Wide
On
opus
Tinio Setup
Caption
Reset Default
Anlilfi’ liltritl Baal.
You can adjust:
OSD Language - You can select the menu's language to
English, Spanish or French.
OSD Time out -Ycu can select the display time of the menu.
Screen Mode - Use the arrow button to choose the screen
aspect ration irom Wide, Normal, Zoom, Cinema and Dot-to-
Dot.
B NOTE
The option of the screen aspect ration is different in
different inputs. (For more information, see “Shortcuts
Instructions”)
DPMS - This is a good function for a computer monitor.
When DPMS is “On", the computer will control the screen on
or oif. E.g. if the computer is in sleep mode, the screen will
be switched oif. If the computer is activated, the screen also
is activated.
Time Setup - You can set the Time Zone, Time and Sleep
Timer.
Time Zone: Select your local time zone: Eastern Time,
Hawaii, Alaska, Arizona, Indiana, Mountain Time, Central
Time or Pacific Time.
Time: You can set time manually or select automatic if
the TV is connected to an antenna or cable source.
' Auto Synchronization: Select “On" to for automatic
date and time setting using information irom broadcast
stations in your area.
” Date: Set the current year/month/day.
' Time: Set the current time.
f Timer: When “On", you can set the time when the TV
turns on/oii automatically.
f Power On Timer: Set the desired time for the TV to
turn on automatically.
" Power Off Timer: Set the desired time for the TV to
turn off automatically.
Sleep Timer: Specify the amount of time before your TV
automatically turns off.
16
Caption -Adjust Closed Captioning settings.
Analog Closed Caption: Select an Analog Caption
setting from CC1~CC4, TEXT1~TEXT4,
Digital Closed Caption: Select a Digital Caption setting:
Service1~ServiceG.
Digital Caption Style: There are two Caption Styles.
One is the automatic function set as the broadcaster,
while the other is the custom style where you can adjust
the font size, color, opacity, background color etc..
Reset Default - Every TV has its original setting before
leaving the factory. This function can help you restore these
settings.
Using the Parental Menu
When you first use this function, the default password
is [0000]. Once you input this password, you can set
options.
cnange Password
Channel Block
Input Block
Program Block
Clean All
ENTER Eriizr Aclust nlENo Back.
You can adjust:
Change Password - If you want to change the default
password, first enter the new password then enter the same
password again,
Channel Block - Lock Channels on the TV.
Digital
Digital
Dlgltal
Analog
ATO$4
ATOS—‘l
ATOS»1
Analog
Analog
Analog
Analog
MENLi Baal.
Input Block - Lock Input source on the TV.
TV
AV
Component
VGA
HDMI‘i
HDMIZ
HDMI 3
tleR Sat MtNd Bank
Program Block - Lock Program on the TV.
Ratlng Enable: Block or unblock TV ratings.
U.S. TV Ratings: Restrict TV programs by USA Ratings.
U.S. Movie Ratings: Restrict movie by USA Ratings.
Canadian English/French Ratings: Restrict movie and
TV programs by Canadian Ratings.
Open V-Chip: Display an advanced V—Chip ratings table
for digital channels.
Block Unrated TV: Block unrated TV programs.
Clean AII - You can reset all looks to factory mode.
3 NOTE
If you choose this lunction, all the programs you preset
will be lost.
Following is the description of these ratings.
U.S. TV Ratings
All children
Directed to older children
General audience
Parental Guidance suggested
Parents Strongly cautioned
Mature Audience only
All of the ratings below that rating set
blocked automatically
Suggestive dialogue
Strong language
Sexual situations
Vlolence
Fantasy Violence
U.S. Movie Ratings
General audience
Parental Guidance suggested
Parents strongly cautioned
Restricted
No one 17 and under admitted
Adult audience only
Canadian English Ratings
Children
Children 8 years and older
General Programming, suitable for all
audiences
Parents Guidance
Wewers 14 years and older
Adult Programming
Canadian French Ratings
General
8+General; Not recommended for young
children
Programming may not be suitable for
children under the age of 13
Programming is not be suitable for
children under the age of 16
Programming restricted to adults
3 NOTE
As you block rating, all rating higher than the ones you
select are blocked as well. Eg. if you choose to block
the MPAA rating R, the higher ratings, NC»17 and X, are
automatically blocked too.
I7
Other In rmat 0
Trouble Shooting
When there is something wrong with your TV you can try turning off the TV and then restart it. You can also Operate
according to the following chart. If the problem still cannot be solved, please contact the professional technicians.
POSSIBLE SOLUTIONS
0 Check if the power cord is in the AC outlet and if it has electricity.
0 Check if you have pressed [POWER] button on the TV or [POWER] button on the
remote control.
0 Check to see if LED light is either red or blue. If illuminated, power to TV is OK.
0 Check for the correct output connection on the external source and for the correct
input connection on the TV.
0 Make sure you have made the correct selection for the input mode for the incoming
signal.
Yes, this is normal. That is the TV searching for previous setting information and
initializing the TV.
0 Check the volume settings.
o Check if Mule mode is set “on".
C If black and white picture first unplug TV from AC outlet and replug after 60 seconds.
0 Check Color Setting if picture is black and white.
C An electrical appliance may be affecting TV set. Turn off any appliances, if
interference goes away. move appliance farther away from TV.
0 Insert the power plug of the TV set into another power outlet.
0 If using an external antenna. check the direction, position and connection of the
antenna.
0 Adjust the direction of your antenna or reset or fine tune the channel.
Check it there is interfering source nearby, such as appliance or electric tool.
“Click“ sound can be caused when the room temperature changes. This change
causes the television cabinet to inflate or contract. which makes the sound. This is
normal and TV is OK.
The Closed Caption function is set in the text mode. To remove it. access Closed
Caption from the menu screen and change the Mode setting from text to either 001 or
off .
0 Informat 0
Trouble Shooting
POSSIBLE SOLUTIONS
That would indicate that the MTS mode on your unit is set to SAP mode. We suggest
setting the MTS mode to either Stereo or Mono . For lurlher instruction. please see
Audio Adjust or MTS/SAP in your user manual.
0 SAP is Second Audio Program. It's a second audio channel that is usually used for a
second language or descriptive audio lor the visually impaired.
0 MTS stands for Multichannel Television Sound. a standard that allows the encoding
of 3 channels of audio within a standard NTSC (analog) video signal to a television.
A television that is able to receive MTS Stereo allows you to watch television with
stereo sound.
0 Check the cable connection lor an incoming signal. Make sure the signal is coming
OK. Best way to confirm signal is to use another TV and/or contact your cable
company.
o Reprogram your channels. Press [MENU] button on your TV remote control. change
Input Source setting to “Cable“. then use "Auto Channels Search“ to reprogram your
channels.
After switching to Cable. please auto program the channels. The TV will “remember” all
the channels then the TV will allow you to surf the channels with [CH NV] buttons.
0 Confirm that TV still has power and is operational.
0 Change the batteries in the remote control.
0 Check if the batteries are correctly installed.
0 Clean the front of the remote control (LED window).
0 If using a universal remote, be sure to select the TV mode on the remote.
c If the remote still does not work:
- Remove and reinstall the batteries correctly to reset the remote or install new
batteries.
- Press the Power button to turn on the TV. With a universal remote it you have reset
or changed the batteries you will need to reprogram the remote for the other units.
0 Check if there is obstruction between the remote control and the TV.
TIP: If you have a digital camera / camera phone, you can aim the front of the remote
at camera lenses (at this time, the camera should set on camera mode, not play
mode). Observe the camera screen while pressing a button on the remote control; you
should see flashing light on the screen. If there is no light observed, the remote control
is not working. You need to repair or replace the remote control.
General
Informat o
Features, appearance and specifications are subject to change without notice.
F42K20£
F46K20E
Width: 39.1 inches (994 mm)
Height: 24.2 inches (615 mm)
Depth: 1.5 inches (33.5 mm)
Width: 42.6 inches (1083 mm)
Height: 26.1 inches (663 mm)
Depth: 1.5 inches (38.6 mm)
Width: 39.1 inches (994 mm)
Height: 26.9 inches (683 mm)
Depth: 9.8 inches (250 mm)
Width: 42.6 inches (1083 mm)
Height: 28.6 inches (727 mm)
Depth: 11.2 inches (285 mm)
35.3 lbs (15 kg)
35.3 lbs (15 kg)
40.6 lbs (13.4 kg)
41.9 lbs (19 Kg)
42 inches 46 inches
1920 x1000 1920 X1080
8 W + 8 W 8 W + 8 W
Please relerta the rating label.
Please refer to the rating label.
120V~60Hz
NTSC
NTSC IATSC / QAM
Temperature: 41 “F ~ 95'F (5“C~ 35°C)
Humidity: 20%-80% RH
Atmospheric pressure: 88 kPa - 106 kPa
480 I/GD Hz, 480 P160 Hz, 720 P/BO Hz, 1080 ”60 Hz,1080 P160 Hz
VGA (840X480 / 80 HZ). SVGA(800X600 I 60 HZ). XGA(1024X788160 Hz)
RGB I 60 Hz (640x480, BOOXGOO. 1024‘768)
YUVISO Hz (480 I, 480 P, 720 P, 1080 I, 1080 P)
20

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
XMP Toolkit                     : 3.1-702
Modify Date                     : 2012:01:13 16:11:04+08:00
Create Date                     : 2012:01:13 16:10:59+08:00
Metadata Date                   : 2012:01:13 16:11:04+08:00
Creator Tool                    : Adobe InDesign CS5.5 (7.5)
Format                          : application/pdf
Document ID                     : uuid:b548395d-835d-4077-b8c2-475ef396a598
Instance ID                     : uuid:c3a95386-b87d-4fe1-94f5-0487d1a36369
Producer                        : Adobe PDF Library 9.9
Has XFA                         : No
Page Count                      : 9
Creator                         : Adobe InDesign CS5.5 (7.5)

EXIF Metadata provided by EXIF.tools