Hisense Electric LCDD0036 Part15 Subpart B-LED LCD TV User Manual ES G132903

Download:
Mirror Download [FCC.gov]
Document ID	2131319
Application ID	QrwZq1gFV7omUH0T/E+3Dw==
Document Description	W9HLCDD0036_User Manual 3
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	295.36kB (3692051 bits)
Date Submitted	2013-12-02 00:00:00
Date Available	2013-12-04 00:00:00
Creation Date	2013-11-26 15:16:00
Producing Software	Corel PDF Engine Version 9.397
Document Lastmod	2013-11-26 15:16:04
Document Title	ES-G132903Ó¢ÎÄ
Document Creator	CorelDRAW Version 9.397
Document Author:	΢ÈíÓû§

Turnlng YOU I' TV on or Off r If Auto selected. the options of Year/Montthay/Tirne are
not available.
To turn yourTV on croft (standby mode): r Setting the Time: Press [4w] to select the number you
1 Plug the power cord into an AC power outlet. want to set and press [A/V] to set.
2. Press [POWER] button YourTVturns 0” 4, Press [A/V] to select your Picture Mode: Home Mode or
3, Press [POWER] button again to turn off your TV When Retail Mode, press [ENTER] button to Confirm.
you turn off your TV, it goes into standby mode
(D WARNING
When your TV is in standby mode. it is still receiving RetailMode
Power- To CompIeIer discomec‘ ”we" “"pIug the WW” Human... anion-WW» “minimum is
cord. '
B NOTE
If your TV does not receive an input signal for several
minutes, lI automatically 9°95 ”“0 standby mode. If you select Retail Mode, a message appears “Are you
. . . sure you want retail mode?" Select “Yes" to continue, or
Tl] mlng the TV on for the FIrSt Tlme select “No" to change your selection.
. . 5 Press [A/V] to select your TV Source' Antenna or Cable,
The Setup Wizard menu appears the first time you turn press [ENTER] button to confirm.
on the TV. It Will assist you to specily the rnenu language,
Picture Mode, TV Source and Channel Installation
IMPORTANT: Make sure that the antenna or cable is
connected.
1. Make sure that you have:
Installed batteries into the remote Control .
Connected an antenna or cable
Connected the power cord
2» Connect your TV'5 power cord to a Power Outlet, the" c Then your TV automatically starts Channel installation
press power. The initial setup screen opens. Press [A/V]
button to select your language, press [ENTER] button to
confirm
available in your Viewmg area.
u Analog Lhannels
an m
nrrlltrt.
‘ Depending on the reception condition, it may take several
3, Press [A/V] to select your options and press [] to minutes to scan channels. Please allow the process to
set the options, complete without interruption,
r If you press [EXIT] to exit the scanning, a message
appears “Please Run Channel Auto Scan", you should
scan channels from the menu of Channels
Selecting the Input Source
The first time you turn on your TV, you must select the TV
signal source. YourTV stores this information, so you do not
need to change the TV signal source unless it changes. For
example, you change from an outside antenna to cable TV.
To select the video input source:
1. Turn on your TV, then press [INPUT] button on the remote
or on the TV. The Input source menu opens.
2. Press [AIV] button to highlight the input source, then
press [ENTER] button.
Changing Channels l Volume
1. Press the [CH NV] (or [CH +/,]) on the TV/remote control
to change the channel
2. Press the [VOL NV] (or [VOL +/-]) on the TV/remole
control to adlust the volume.
3. Press the numeric buttons on the remote control to
display the corresponding channels.
Changing the channels can also be achieved by directly
entering the channel number using the numeric keys on
the remote control. If you are entering a two or three digit
channel number, the time between key presses should be
less than 3 seconds
Shortcuts Instructions
Aspect - Select the screen aspect ratio from Normal, Wide,
Auto, Zoom and Cinema.
Normal: The original 4:3 aspect
ratio (1.33:1 signal) is preserved, O 0
so black bars are added to the left 0
and right of the image. Standard TV 0
broadcasts are displayed with a 4:3
aspect ratio.
Wide: When watching a standard
broadcast or fullrframe movie in
this mode, the display image is O
stretched proportionately to fill
the TV screen When watching a
widescreen (1.78:1 signal) program
or movie, the display image fills the
TV screen.
Auto: Automatically adlusts the
image based on the screen size and
the TV program.
Zoom: Stretch the 4 3 aspect ratio
image vertically and horizontally to
fill the screen at 1:1 78 aspect ratio.
cinema: Stretch the 4.3 aspect ratio
image vertically and horizontally to
fill the screen at 1.2 35 aspect ratio.
o n
The aspect ratio varies with different sources.
Picture - Press to set the picture mode. It can be set as
Vivid. Standard, Theater, Energy Savings or Custom This
mode achieves a certain image display effect by setting the
brightness, contrast and color etc
Sound - Press to set the sound mode. lt can be set as
Standard, Theater, Music, Speech and Custom.
Mute - Press to turn the sound off, press this button again
to turn the sound back on. This function is used to switch off
sound temporarily.
Sleep - It can set the TV to let it enter into the Standby
state automatically. Press this button repeatedly to select
the proper sleeping clock mode, and the clock tells you the
remaining time before the TV enters Standby state.
Display - Display the information banner The information
including channel number. channel name, current system
time, tuner mode, audio stream. video format. audio
language, closed caption mode, parental locks rated,
program details. etc.
To Use the Menu
Press [MENU] to open the main menu.
Press [A/V] to select a menu option. then press [VI
ENTER] button to enterthe menu.
in each menu, you can-
Press [A/V] to select an item,
Press [] to ad]ust the value, or
Press [VIENTER] to enter the submenu,
Press [MENU] to back the previous menu.
4 Press [EXIT] to exit the menu.
B NOTE
Standard 0
—i I— an
_l l— 50
Colai —i I— so
Tint _l l— i]
—l i._ 50
The menus in the user manual may vary slightly from the actual screen.
Using the Picture Menu
Firture Mode
Brightness
Curitra§|
Color —i l— 50
Standard 4}
_] l— 50
—l i._ 50
‘fint —i l— D
Sharpne
Advanced VIdEO
P “re Settings
_] l— 50
You can adjust:
Picture Mode - Ad]ust the Picture Mode. You can select
Vivid, Standard, Theater, Energy Savings or Custom.
Brightness - lncrease or decrease the brightness of the
picture Increasing the brightness can add more light to dark
areas of the picture, while decreasing the brightness can
add more darkness to light areas of the picture.
Contrast - Increase or decrease the contrast oir the picture.
Increase the contrast to ad]ust the white areas of the picture
or decrease the contrast to adjust the black areas of the
picture
Color - Adjusts the color intensity of the picture. A low
setting may make the color look faded A high setting may
make the color look artificial
Tint - Adjusts the color balance of the picture Use this
control to make skin tones look more natural
Sharpness - You can increase the sharpness level for clearer
images or decrease the sharpness level for smoother images.
Advanced Video - Access advanced video settings such as
Backlight, Color Temperature and Noise Reduction.
Dynamic Backlight Control: Enhances the contrast
ratio between light and dark areas of the picture. You can
select Off, Low, or High
Backlight: Sets the overall brilliance of the screen, When
the option of Dynamic Backlight Control is turned Low
or High, you cannot change the Back Light setting,
Aspect Ratio: To choose the screen aspect ration from
Wide, Cinema,Auto, Normal, 1:1 PIXEL MAP and Zoom.
3 NOTE
The option of the screen Aspect Ration is different in
different inputs. (For more information, see “Shortcuts
lnstructions")
Color Temperature: Change the color temperature. You
can select the color temperature from three options: Cool,
Normal or Warm.
Overscan: Ad]usts the picture's reproduction rate, You
can select On or Off.
3 NOTE
Only available in DTV, Component and HDMI(YUV)
source.
Noise Reduction: Select to reduce the noise level of
connected equipment off, Low, Medium and High
Adaptive Contrast: Automatically ad]usts picture detail
and brightness. You can select On or Off.
120Hz Effect: Inserts frames to reduce ]udder in fast
action scenes You can select On or Off.
B NOTE
Only available in the models that support 120 Hz.
Reset Picture Settings - Resets all Picture Settings to the
factory defaults
I;
Using the Audio Menu
Auto Volume Continl
TV Speakers
Advanced Audio
Reset Audio Settings
W 1- ,. lJir‘
Adlust settln s to affect sound quality
You can adjust:
Sound Mode - Select the Sound Mode: Standard, Theater,
Music, Speech or Custom.
Balance -Adjust the volume of the left and right speakers,
Equalizer - Soften or enhance the sound at specific
frequency points.
Auto Volume Control , Automatically adjusts volume to a
consistent level, attenuates loud passages
TV Speakers - Selects where to play TV audio. You
can select On (default selling) to play audio through TV
speakers. or select Off to play audio through the speakers
on an external audio system.
Advanced Audio , Access Advanced Audio settings such as
Digital Audio Out, MTS/SAP, Audio Language
Stereo.
English 9
MTSi‘SAP
Audio Language
Digital Audio Out: Send digital audio to an external
audio system. You can select PCM or RAW.
, PCM: PCM outputs two channel audio regardless of
the input format.
c RAW: When the data stream carries Dolby signal,
digital SPDIF outputs Dolby data stream, When the
data stream carries no Dolby signal, it transports PCM
data stream.
MTSISAP (Analog channels only): Select the default
audio stream. you can select Mono. Stereo or SAP
(Second Audio Program).
’ Mono: Select this option if there is noise or static on
Weak stereo broadcasts.
“ Stereo: Select this option for programs broadcast in
stereo
’ SAP: Depending on the particular program being
broadcast. you can listen to a foreign-language
translation.
Audio Language (Digital channels only) - Change the
default value for audio language.
Reset Audio Settings - Resets all audio settings to the
factory defaults
Using the Channels Menu
Antenna 4}
runei mode.
Auto Channel ‘earch
Channel Skip
Favorite List
Channel Labels
ATOSVI p
signal Strength >
Audio 0an on»
ma. , w w is Eat
You can adjust:
Tuner Mode - Select the TV signal source You can select
Antenna or Cable
Auto Channel Search - Scans for channels that have
signals and stores the channels information in memory.
Scanning for Channels
Antenna
Siam. canning
Digital ciiaiiii n
Analog nnnels l)
_4 i
Digital Channels: The scanned TV program in digital
signals.
Analog Channels: The scanned TV program in analog
signals
Channel Skip - You can hide channels in the channel list.
Press [A/V] to select the channels you want to hide and
press [ENTER] to confirm.
l lSArATDSJ
D 17
l l29
D45
Manual add and 5le channels in your pi ran
t? NOTE
When you press [CH NV] (or [CH +/s]) button, your
TV skips the hidden channels You can still tune to the
channel by pressing the number buttons on the remote
control.
Favorite List - Display your Favorite List. You can add or
delete channels to create your favorite list
'7‘ Favorite List
p l lfirerTDSA
yI Dsrermsrz
l’l
l lemme.»
Dl7
3 ll29
‘, 45
'w B
m. Eris, . r." at
Add Lharlnels tU i rsete a rewrite list
Channel Labels - Change the channel name. Press []
to select the character you want to change. then press [A/V]
to set the character.
Signal Strength (Digital channels only)- You can check the
digital signal strength to determine if you need to adlust your
antenna or digital cable input.
Audio Only - Listen to the program audio only. when you
turn off the picture on yourTV.
E NOTES
’ Audio Only works only when the input source is TV. and
yourTV is receiving a broadcast signal
’ To exit audio only mode. press any button. When you exit
audio only mode, the Audio Only option is automatically
reset to OH.
Using the Settings Menu
Settings
cased Cap on >
Time V
Menu Language
inptit Labels
Englisn 4»
You can adjust:
Closed Caption - Adjust Closed Caption settings.
Closed Caption: To select CC Off (turns off closed
caption). CC On (turns on closed caption). or CC on when
Mute (turns on closed caption when the sound is muted).
4t
cci 4t
Servicet 4}
Analog Caption
Digital Caption
Digital Caption settings >
A ed ptlunln setting
Analog Captio . Select an Analog Caption setting from
cct~c04, TEXT1~TEXT4. Off.
Digital Caption: Select a Digital Caption setting.
Service1~Service6. Off
Digital Caption Settings: There are two Caption Styles.
One is the automatic function set as the broadcaster.
while the other is the custom style where you can adlust
the font Size. color. opacity. background color etc
Time - Access Time settings such as Time Zone. Date/Time.
Sleep Timer.
Daylight sayings
Dateninie
Sleep Timer
Time Zone: Select your local time Zone: Pacific. Alaska.
Hawaii. Newfoundland. Atlantic, Eastern. Central and
Mountain.
Daylight Savings:Press [A/V] to highlight Daylight
Savings. then press [] to select On (it your viewmg
area observes Daylight Savings Time) or off (if your
viewing area does not observe Daylight Savings Time).
Date/Time: You can set time manually or select automatic
if the TV is connected to an antenna or cable source.
’ Auto synchronization: Select Manual (to set the date
and time manually) or Auto (to set the date and time
automatically from a TV signal source based on the
time zone you select),
it you selected Manual. set the followmg options.
“ Date: Set the Current year/month/day
” Time: Set the current time.
Sleep Timer: Specify the amount of time before your TV
automatically turns off.
Menu Language - You can select the menus language to
English. Spanish or French.
Input Labels - Press [A/V] to select the input source you
want to label, then press [V] to move to the custom label
field and then press [A/V] to select the character you want.
When you have completed the label, The next time you
press INPUT, your label Wlll appear in the Input source list.
CEC Function- CEC Function lets you control HDMI CEC-
cornpatible devices connected to the HDMI jacks on your
TV using the remote control that came With your TV, To use
CEC Function, you must set the CEC Control setting to On.
CEC Function
Device Auto Power on
TV Auto Power On
Audio Recelver
cEc Device List
” HDMl cables must be used to connect HDMI CEC-
compatible devices to your TV.
’ The Connected device's HDMI CEC feature must be
turned on
r If you connect an HDMI device that is not HDMI CEC-
compatible, all the CEC Control features do not work
" Depending on the connected HDMI device, the CEC
Control feature may not work
CEC Control: Turning CEC Function on or off.
Device Auto Power Off: When HDMl-CEC is turned on,
Device Auto Power Off turns off HDMI CEC devices when
you turn off your TV.
TV Auto Power On: When CEO is turned on and you
turn on an HDMI CEC deVice, TVAuto Power On turns on
your TV automatically
Audio Receiver: When CEO is turned on and you have
connected an audio receiver to your TV, turning on Audio
Receiver lets you use your TV‘s remote control to control
the volume on the audio receiver.
CEC Device Lists. You can display a list of HDMI CEC
devices that are connected to your TV and select the
source you want.
Connect: Connect to the current CEC devices .
Root Menu: You can open an CECrcompatible device's
root menu, then use your TV's remote control to control
the deVice
Power LED - To turn on or off the standby indicatior.
Component Settings (Only available in Component
mode.) - You can adjust the horizontal distortion that may
occur when watching Video from a component video dewce
ll
Phase: Minimizes horizontal distortion.
Reset Component Settings: Resets all component video
settings to factory rnode.
Version Info - Display the software version information,
Reset to Default - Every TV has its original setting before
leaving the factory. This function can help you restore these
settings.
Using the Parental Controls Menu
When you first use this function, the default password is
[0000]. Once you input this password you can set options,
Pare al Controls
Block Unrated TV
USA Parental Locks
Canadian Parental Locks
Change Password
Open VrCrllp
Reset Parental Cuntrol Settings
Clean All
, were, H mm
Lu.k n tinii tttutxittti
,/'\
If
You can adjust:
Button Lock - Block or unblock the button of the TV.
Block Unrated TV - Block unrated TV programs.
USA Parental Locks - Restrict movie and TV programs for
USA Ratings
Canadian Parental Locks - Restrict movie and TV
programs for Canadian Ratings.
Change Password - If you Want to change the default
password, first enter the new password then enter the same
password again,
Open V-Chip - Display an advanced V-Chip ratings table for
digital channels (USA only).
Reset Parental Control Settings - Resets all parental
control settings to factory mode.
Clean All - Reset all your settings to factory mode.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Author                          : ΢ÈíÓû§
Create Date                     : 2013:11:26 15:16:00+08:00
Modify Date                     : 2013:11:26 15:16:04+08:00
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Metadata Date                   : 2013:11:26 15:16:04+08:00
Creator Tool                    : CorelDRAW Version 9.397
Format                          : application/pdf
Title                           : ES-G132903Ó¢ÎÄ
Creator                         : ΢ÈíÓû§
Document ID                     : uuid:0963897b-6a97-4d59-87b9-d88cbe4cc3f9
Instance ID                     : uuid:8f62f20f-b692-4c14-b47f-a4547fc5bd17
Producer                        : Corel PDF Engine Version 9.397
Page Count                      : 6

EXIF Metadata provided by EXIF.tools