Hisense Electric LCDD0036 Part15 Subpart B-LED LCD TV User Manual ES G132903

Hisense Electric Co., Ltd. Part15 Subpart B-LED LCD TV ES G132903

W9HLCDD0036_User Manual 4

Download: Hisense Electric LCDD0036 Part15 Subpart B-LED LCD TV User Manual ES G132903
Mirror Download [FCC.gov]Hisense Electric LCDD0036 Part15 Subpart B-LED LCD TV User Manual ES G132903
Document ID2131320
Application IDQrwZq1gFV7omUH0T/E+3Dw==
Document DescriptionW9HLCDD0036_User Manual 4
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize175.87kB (2198396 bits)
Date Submitted2013-12-02 00:00:00
Date Available2013-12-04 00:00:00
Creation Date2013-11-26 15:16:24
Producing SoftwareCorel PDF Engine Version 9.397
Document Lastmod2013-11-26 15:16:31
Document TitleES-G132903Ó¢ÎÄ
Document CreatorCorelDRAW Version 9.397
Document Author: ΢ÈíÓû§

s'c eatures
Following is the description of these ratings.
TVRatings
Canadian English Ra tings
As you block rating. all rating higher than the ones you
select are blocked as well. E.g. if you choose to block
the MPAA rating R, the higher ratings, NC-17 and X,
are automatically blocked too.
12
Digital Media Player
Please note that Hisense Will not assume any responsibility
for any lost data and cannot guarantee perfect compatibility
with all mass storage devices. Be sure to insert the USB disk
with standard USB 2 0 port. Data Input Irom USB Memory
Stick only Do not Connect any device to this terminal such
as digital camera, keyboard. mouse, etc.
I? NOTE
Never remove the USB flash drive or turn off your TV
while vieWing video/photo.
* Press [INPUT] button to display the INPUT menu, press
[A/V] button to highlight the USB source, then press
[ENTER] button to confirm. (If you want to exit DMP, you
can press [lNPUT] button to switch to other sources)
‘ Press [RED] button to switch the media type.
’ Press [YELLOW/BLUE] button to turn to the previous!
next page
“ism"
:- Media content control function buttons
When viewing video/photo, you can press these buttons on
the remote control to control video/photo.
Fast ton/ward The preVious
one
Fast backward —‘ The next one
Playi
Pause Stop
Enjoy Movie Files
Press [RED] button to swrtch the media type to MOVIE.
Press [A/V/] to select the movie you want to view.
Press [ENTER] to play the movie.
Press [EXIT] to exit the video and return to the previous
directory
5, When enjoying the video, press [MENU] button to display/
exit the tool bar Press [VIENTER] to enter the submenu
and press [EXIT] to return to the upper menu.
#9.”?
‘ Tool bar
@0990
0 Progress bar.
0 Play/Pause the Video
9 Play the previous video,
0 Play the next Video.
6 Fast backward Press [ENTER] to select the backward
speed.
0 Fasttorward Press [ENTER] to select the forward speed
6 Options. Adjust Repeat Mode. Zoom Mode, Audio Track,
and Subtitle.
0 Play list You can select the video you want to View, then
press [ENTER] to play.
0 Select time to play. Press [] to select the position
you want to set, press [0~9] to set the time (or press [A/V]
to ad]ust it), then press [ENTER] to conlirm and the video
will to play at the time you have set.
@Videe Info, Displays details on image resolution, audio
and video code, subtitle, audio track, program and time
0 Stop playback,
6. Press [ASPECT] button one or more times to enlarge the
image by Wide and Normal.
vance eatures
Browse the Photos
Press [RED] button to switch the media type to PHOTO
Press [A/V/] to select the photo you want to view.
Press [ENTER] to browse the photo.
Press [EXl‘l] to return to the previous directory.
91:59.“?
When browsing photos. press [MENU] button to display/
exit the tool bar. Press [FIENTER] to enter the submenu
and press [EXIT] to return to the upper menu.
0 Tool bar
H H H H H
90 oo oo oo 90
When the photos in browsing or pausing, the menu Wl”
be different.
0 Play/Pause the photo
9 Stop browsing the photo
0 Browse the previous photo
9 Browse the next photo.
9 Allows the photo to rotate 90 degrees clockwise.
O Allows the photo to rotate 90 degrees anti-clockwise.
6 Zoom in the photo
0 Zoom out the photo.
0 Options. Vou can ad]ust Show Speed.
0 Photo lnfo Allows you to View the photo information
I The unit recognizes only a USB Memory Stick
I Do not use a USB hub or an extension cable to connect an external hard disk drive to the unit (Not supported)
A USB Memory Stick is always inserted to this unit directly.
A USB Memory Stick is not supplied with this unit.
We do not guarantee that all USB Memory Sticks can be supported by this unit.
Be sure to keep a backup copy of the original files on your device before you play them back on this unit. We have no
responsibilities for damage or loss of your stored data.
To protect your USB Memory Stick files from being erased place the write protect sliding tab in the protect position
When you are ready to remove a USB Memory Stick. set the unit to go into Standby mode to avoid any damage to your
data and the unit.
A USB Memory Stick that requires its own driver or the device With a special system such as fingerprint recognition are
not supported.
This unit is not allowed to use the USB Memory Stick which requires an external power supply (500mA or more).
14
dvanced Features
Playable Format List
Video Decoder Support List Audio Decoder Support List
1 9201 080
1 920‘ 1 080
1 920‘1 080
MKV
1 920‘1 080
768‘576
1920'1080
1 920‘1 080
1 920 1 080
1 920 1 080
15
Trouble Shooting
When there is something wrong with your TV, you can try turning off the TV and then restart it. You can also Operate
according to the following chart. If the problem still cannot be solved, please contact the professional technicians.
POSSIBLE SOLUTIONS
0 Check if the power cord is in the AC outlet and if it has electricity.
0 Check if you have pressed [POWER] button on the TV or [POWER] button on the
remote control.
I Check to see if LED light is either red or blue. If illuminated, power to TV is OK.
C Check for the correct output connection on the external source and for the correct
input connection on the TV.
0 Make sure you have made the correct selection for the input mode for the incoming
signal.
Yes, this is normal. That is the TV searching for previous setting information and
initializing the TV.
0 Check the volume settings,
0 Check if Mute mode is set “on".
C If black and white picture first unplug TV from AC outlet and replug after 60 seconds,
0 Check Color Setting if picture is black and white.
0 An electrical appliance may be affecting TV set. Turn off any appliances, if
interference goes away, move appliance farther away from TV.
I Insert the power plug of the TV set into another power outlet,
I If using an external antenna, check the direction, position and connection of the
antenna.
0 Adjust the direction ol your antenna or reset or fine tune the channel.
Check if there is interfering source nearby, such as appliance or electric tool.
“Click" sound can be caused when the room temperature changes. This change
causes the television cabinet to inflate or contract. which makes the sound. This is
normal and TV is OK.
The Closed Caption function is set in the text mode. To remove it, access Closed
Caption from the menu screen and change the Mode setting from text to either C01 or
off.
16
Trouble Shoot ng
POSSIBLE SOLUTIONS
That would indicate that the MTS mode on your unit is set to SAP mode. We suggest
setting the MTS mode to either Stereo or Mono . For further instruction, please see
Audio Adjust or MTS/SAP in your user manual.
0 SAP is Second Audio Program. It's a second audio channel that is usually used for a
second language or descriptive audio tor the visually impaired.
C MTS stands for Multichannel Television Sound, a standard that allows the encoding
of 3 channels of audio within a standard NTSC (analog) video signal to a television.
A television that is able to receive MTS Stereo allows you to watch television with
stereo sound.
0 Check the cable connection tor an incoming signal. Make sure the signal is coming
OK. Best way to confirm signal is to use another TV and/or contact your cable
company.
0 Reprogram your channels. Press [MENU] button on your TV remote control, change
Input Source setting to “Cable", then use “Auto Channels Search" to reprogram your
channels.
After switching to Cable, please auto program the channels. The TV will “remember” all
the channels then the TV will allow you to surf the channels with [CH NV] buttons.
I Confirm that TV still has power and is operational.
0 Change the batteries in the remote control.
0 Check if the batteries are correctly installed.
0 Clean the front of the remote control (LED window).
0 If using a universal remote. be sure to select the TV mode on the remote.
o If the remote still does not work:
- Remove and reinstall the batteries correctly to reset the remote or install new
batteries.
- Press the Power button to turn on the TV. With a universal remote it you have reset
or changed the batteries you will need to reprogram the remote for the other units.
0 Check if there is obstmction between the remote control and the TV.
TIP: It you have a digital camera / camera phone, you can aim the front of the remote
at camera lenses (at this time. the camera should set on camera mode, not play
mode). Observe the camera screen while pressing a button on the remote control; you
should see flashing light on the screen. If there is no light observed. the remote control
is not working. You need to repair or replace the remote control.
l7

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Author                          : ΢ÈíÓû§
Create Date                     : 2013:11:26 15:16:24+08:00
Modify Date                     : 2013:11:26 15:16:31+08:00
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Metadata Date                   : 2013:11:26 15:16:31+08:00
Creator Tool                    : CorelDRAW Version 9.397
Format                          : application/pdf
Title                           : ES-G132903Ó¢ÎÄ
Creator                         : ΢ÈíÓû§
Document ID                     : uuid:148f050c-cfeb-42e5-8ab8-d83005f34b1e
Instance ID                     : uuid:b3f0c5d3-2fdf-4494-901b-cd0fd165a4d1
Producer                        : Corel PDF Engine Version 9.397
Page Count                      : 6
EXIF Metadata provided by EXIF.tools
FCC ID Filing: W9HLCDD0036

Navigation menu