Hisense Electric LCDD0038 Part15 Subpart B-LED LCD TV User Manual W9HLCDD0038 5

Download:
Mirror Download [FCC.gov]
Document ID	2192246
Application ID	LC3DNH0JSglaSrlHZ5rapQ==
Document Description	W9HLCDD0038_User Manual 5
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	143.26kB (1790767 bits)
Date Submitted	2014-02-17 00:00:00
Date Available	2014-02-18 00:00:00
Creation Date	2014-02-13 15:52:04
Producing Software	Acrobat Distiller 10.1.9 (Windows)
Document Lastmod	2014-02-13 15:52:04
Document Title	32K366-39K366-42A300快速页--20130620--CCX
Document Creator	Adobe Illustrator CS4
Document Author:	mengqingfang

CY-G
Hotel Settings
QUICK SETUP GUIDE
No further notice for any spec change and update etc.
LTDN42A300MH/LHD39A300MH
LHD32K366MH
;;;;;
ANT Connect an outdoor VHF/UHF antenna.
ANT/CABLE
VHF/UHF Antenna
OR
ANT OUT
OR
User Manual
Quick Setup Guide
Important information
Remote Control
Screw (M4 × 12) × 6
Screw (ST4 × 14) ×2
Screw (M5 × 12) × 4
Batteries: AAA × 2
For 39” 42”: Spacer × 4 Screw (M6 × 30) × 4
Follow instructions provided with the wall bracket.If you are not sure of your ability to
complete the installation, contact a professional installer or service technician for
assistance. The manufacturer is not responsible for any installer or service technician for
assistance. The manufacturer is not responsible for any damages or injuries that occur
due to mishandling or incorrect assembly. Be sure to use the provider spacers between
the TV and the bracket when attaching the mount.
INSTALLING THE STAND
MAKING CONNECTIONS
VGA & PC AUDIO IN Connect a VGA cable and an audio cable from the PC.
PC AUDIO IN
ACCESSORIES LIST
AV IN
VIDEO
MENU

(1).Connect target TV to AC Power.
(2).Plug pre-loaded USB drive (prepared in Step-5a) into USB port on the side
of the target TV.
(3).Turn target TV on using the Power key on the remote control.
(4).TV will display “USB connection, are you sure you want to switch to USB?”
(5).Press “MENU’.
(6).Select “SOUND” sub-menu and press “ENTER”.
(7).Select “BALANCE” and press “ENTER”.
(8).Use the Arrow keys on the remote control to adjust balance to zero then
enter access code “5 4 8” using the numeric keys on the remote control to
open the Hotel menu. Press the “ENTER” key on the remote control.
(9).Select “CLONE” and press the “ENTER” key on the remote control.
(10).Select “Write In” and press the “ENTER” key on the remote control.
(11).TV will display “Cloning Function – Write In”.Select “YES” and press the
“ENTER” key on the remote control.
(12).TV will display “download success, system rebooting” and automatically
exit the Hotel menu.
(13).The TV settings have been transferred to the target TV.
(14).Turn target TV off using the Power key on the remote control.
(15).Remove the USB drive from the target TV.
VOL
HDMI 2 RJ12 AUDIO USB
OUT
INPUT
VOL
DIGITAL
OUTPUT
CH
Secure the stand cover to the stand
column vertically with the 2 screws
(M4×12) provided.
AC power cord
ANT/CABLE SERVICE
MENU
Display the on-screen menu to setup your TV’s features.
INPUT
VOL +/CH /
Select the different input signal sources.
Adjust the volume.
Select the channel.
Turn on the TV or put the TV in standby mode.
Caution: The TV continues to receive power even in standby mode.
Unplug the power cord to disconnect power.
Connect an antenna or cable TV to this jack.
HDMI (High-Definition Multimedia Interface) provides an
uncompressed, all digital audio/video interface between this TV and
any HDMI-device, such as a set-top box, Blu-ray disc player, or A/V
receiver.
Connect to a DVD player, Digital Set-Top-Box, or other A/V devices
with component (YPBPR) video and audio output jacks.
Connect to the composite video and audio (L/R) output jacks on
external video devices.
HDMI
COMPONENT IN
NOTE
The Picture is Only for Reference.
CAUTION
4.7inch
(120mm)
Carefully place your TV facedown on a soft, cushioned surface to prevent damage
to the TV or scratching to the screen.
To reduce the potential for personal injury or damage to the TV, the TV and Stand
must be attached to a table desk or so it is secured from tipping or falling.
5 Locate the TV and Stand in the desired position on
12inch(304mm)
the table or desk.
For a 32 ” TV, mark a rectangle12 ”(304mm)x 4.7 ”
(120mm).
Drill a 0.25 ”(~6mm) diameter hole at each corner of the
rectangle.
Using M5 bolts, attached the TV and Stand to the table or
desk.Use a bolt length equal to the thickness of the table
stand
4-Screws
or desk plus 0.3~0.4 ” (8~10mm). E.g. if table thickness =
0.6 ” (15mm); use an M5×25 bolt.
HDMI 1
Description
ANT/CABLE
Secure the stand cover to the TV with
the 4 screws (M5×12) provided.
PB PR
COMPONENT IN
Item
(Power button)
Secure the stand cover to the stand
column horizontally with the 2 screws
(ST4×14) provided.
AV IN
VGA
PC/DVI AUDIO IN
Connect to a PC or other devices with a VGA or DVI interface.
Connect headphone or analog sound system using RCA Y-cable
(1/8"-stereo mini to L/R phono-not provided).
Connect an audio amplifier to this jack.
DIGITAL OUTPUT
USB
Port for Digital Media Player and for software update.
Connect a RJ-12 Cable to this jack, then to an external control device
(such as a computer or A/V control system), to control the TV functions
RJ12
externally.
Check the jacks' for position and type before making any connections. Loose connections can
result in image or color problems. Make sure that all connections are tight and secure.
/AUDIO OUT
HDMI / COMP / AV Connect an HDMI cable or Comp/AV Adapter from an external A/V
equipment.
BEST (HDMI)
NOTES
PR
PB
table
AV IN
VIDEO
If you want to attach the TV to a wall-mount bracket, you should first
remove the stand if it is pre-attached. Carefully place your TV screen face-down on a
cushioned, clean surface to protect the screen from damages and scratches.
Insert four spacers (provided) into the corresponding
bracket screw holes on the back of your
TV, then attach the wall-mount bracket
to your TV using four screws
(provided) or the screws/spacers
provided with the wall-mount bracket.
See the instructions that came with the
wall-mount bracket for screw/washer
configurations and information on how
to correctly hang your TV.
Note: Only for LHD39A300MH &
42A300MH,32K366MH dose not need
spacers.
Wall-mount hole
100×100 (32”)
pattern VESA
CAUTION
200×200 (39” 42”)
(mm)
To prevent internal damage to the TV and
M4 (32”)
Wall-mount screw
ensure the TV is mounted securely, be
size (mm)
M6 (39” 42”)
sure to use fixing screws (provided)
INSTALLING A WALL-MOUNT BRACKET
COMPONENT IN
Included with the TV Stand are four (4) double-end studs.
One end is M5 and attaches to the TV Stand. The other
end is M6 and is suitable for mounting the TV Stand on a
table or desk up to 1” (25mm) thick. Also included are four
(4) M6 washers and four (4) M6 nuts for attaching the TV
Stand to the table or desk using the double-end studs.
PC AUDIO IN
PC IN
VGA
CH
Pr
BETTER
(COMP)
Component
Pr
Pb
Pb
Video
GOOD
(AV)
AV
Video
HEADPHONE Connect Headphone for audio out of the TV.
AUDIO OUT
USB Connect a USB device for browsing photos and music.
Mobile Hard Disk
Remote Control and Stand are optional depending on customer's requirement.
DIGITAL
AUDIO OUT
TV SETUP
1.Turn TV on using the Power key on the remote control.
2.Press “MENU’.
3.Select “SOUND” sub-menu and press “ENTER”.
4.Select “BALANCE” and press “ENTER”.
5.Use the Arrow keys on the remote control to adjust balance to zero then enter
access code “5 4 8” using the numeric keys on the remote control to open the
Hotel menu. Press the “ENTER” key on the remote control.
6.Select “Channel Setting” and press the “ENTER” key on the remote control.
7.Select “Tuner Source” and press the “ENTER” key on the remote control.
(1).Select appropriate connection: “Antenna” or “Cable” and press the
“ENTER” key on the remote control.
(2).Select “Auto Scan” and press the “ENTER” key on the remote control.
Start now is displayed; press the “ENTER” key on the remote control.
(3).When the Auto Scan is complete, select “FINISH” and press the “ENTER”
key on the remote control.
8.To customize the channel map, select “Program Guide Edit” and press the
“ENTER” key on the remote control.
TV Setup.
1.Turn on the TV using the Power key on the remote control
(top/left).
2..Press the “MENU” key on the remote control.
3.Press the “DOWN” arrow key three times to highlight the
Installation icon.
4.Press the “ENTER” key to select the Installation submenu.
5.Use the “UP” or “DOWN” arrow keys to navigate in the
Installation submenu:
(1).Language
(2).Channels
(3).Time
(4).Source Labels
(5).Reset AV settings
Installation
TV
Language
English
Channels
>>>
Time
>>>
Add
Source Labels
>>>
Reset AV settings
Start now
Move:
Enter:
OK
(1).Use the “UP” or “DOWN” arrow keys
and the “ENTER” key on the remote
control to highlight the channel entry to
Channel No. Skip
modify.
(2).On the remote control there are four
color coded keys to modify the
highlighted channel entry:
a.Rename the highlighted channel entry=
RED.
b.Skip the highlighted channel entry=
GREEN.
c.Copy the highlighted channel entry= YELLOW.
d.Delete the highlighted channel entry= BLUE.
(3).In addition the “RIGHT” arrow key on the remote control modifies the
highlighted channel entry’s position in the channel map.
9.Rename (RED remote control key)
(1).Use the remote control to navigate the virtual keyboard and enter the
desired channel name.
(2). Select “DONE” and press the “ENTER” key on the remote control.
10.Skip (GREEN remote control key)
(1).Press the “GREEN” key on the remote control to toggle the channel entry
skip setting (on and off).
11.Copy (YELLOW remote control key)
(1).Press the “YELLOW” key on the remote control to copy the highlighted
entry.
(2).Use the “UP” or “DOWN” arrow keys on the remote control to move the
cursor to the desired channel map position and press the “ENTER” key on the
remote control to insert a copy of the highlighted entry into the channel map.
12.Delete (BLUE remote control key)
(1).Press the “BLUE” key on the remote control to remove the highlighted
entry from the channel map.
13.Insert (“RIGHT” arrow remote control key) may be used to adjust the location
of channels in the channel map.
(1).Notes:
a.When the “CH UP” and “CH DN” keys are pressed on the remote control, the
channels are tuned in the order they are saved in the channel map.
b.The auto scan function searches for analog channels first the digital
channels so the preset order will start with analog channels from position
number 1 and follow with digital channels. A typical use of the Insert function
would be to relocate the digital channels to start from position number 1 and
follow with the analog channels or to locate a custom hotel greeting or
information channel at the top of the channel map.
(2).Press the “RIGHT” arrow remote control key to select the highlighted entry.
(3).Use the “UP” or “DOWN” arrow keys on the remote control to move the
cursor to the desired channel map position and press the “ENTER” key on the
remote control. The channel will be moved to the selected position and
inserted into the channel map.
a.For example, to move the channel in position 8 to position 1.
(a).Highlight the channel in position 8 and press the “RIGHT” arrow key on the
remote control.
(b).Use the “UP” arrow key on the remote control to move the cursor to
position 1 and press the “ENTER” key on the remote control.
(c).The channel that was in position 8 will now be in position 1 and any
channels affected by the insertion will automatically be shifted accordingly
inthe channel map.
14.Press the “EXIT” key on the remote control when finished making changes to
the channel map. The hotel menu will automatically close.
Exit:
Add
Add
Add
Add
Add
Add
Add
Add
Add
EXIT
6.Select “Channels” and press the “ENTER” key on the remote
control.
7.Select “Installation Mode/Tuner source” and press the “ENTER”
key on the remote control.
(1).Select appropriate connection: “Antenna” or “Cable” and
press the “ENTER” key on the remote control.
(2).Select “Auto Program/Auto Scan” and press the “ENTER” key on the remote
control.
(3).When the Auto Programming is complete, press the “EXIT” key on the remote
control.
8.To set up the tuner with a custom channel map, see Step-6.
For Pro:Idiom™ Standard & High Definition Systems with custom channel remapping:
(1).Turn TV on using the Power key on the remote control.
(2).Press “MENU’.
(3).Select “SOUND” sub-menu and press “ENTER”.
(4).Select “BALANCE” and press “ENTER”.
(5).Use the Arrow keys on the remote control to adjust balance to zero then enter
access code “5 4 8” using the numeric keys on the remote control to open the Hotel
menu. Press the “ENTER” key on the remote control
(6).Select “SSID Setting” (scroll down below Clone option) and press the “ENTER”
key on the remote control.
(7).Select “Set SSID” and press the “ENTER” key on the remote control.
(8).TV will display “Set SSID” menu. Use the remote control to navigate the virtual
keyboard and enter the SSID.
(9).Select “DONE” and press the “ENTER” key on the remote control.
(10).To set up the tuner with a custom channel map, see Step-6.
Duplicating Setup for multiple TV installations.
DIGITAL AUDIO OUT Connect a digital audio device to this jack.
Channel Setting and Custom Channel Map.
1.Turn on the TV using the Power key on the remote control (top/left).
2.Press the “MENU” key on the remote control.
To simplify multiple TV set installation, after configuring a TV all its settings may
be cloned (copied) to additional TV units via USB; to begin:
(1).Connect a fully configured TV to AC Power.
(2).Plug a USB drive into USB port on the side of the TV.
(3).Turn TV on using the Power key on the remote control.
(4).TV will display “USB connection, are you sure you want to switch to USB?”
(5).Press “MENU’.
(6).Select “SOUND” sub-menu and press “ENTER”.
(7).Select “BALANCE” and press “ENTER”.
(8).Use the Arrow keys on the remote control to adjust balance to zero then
enter access code “5 4 8” using the numeric keys on the remote control to
open the Hotel menu. Press the “ENTER” key on the remote control.
(9).Select “CLONE” and press the “ENTER” key on the remote control.
(10).Select “Read Out” and press the “ENTER” key on the remote control.
(11).TV will display “Cloning Function – Read Out”. Select “YES” and press
the “ENTER” key on the remote control.
(12).TV will display “Please wait…” then “Upload Success” and automatically
exit the Hotel menu.
(13).The TV settings have been saved to the USB drive.
Clone setting to additional TVs. Note: the target TV does not need input
source(s) connected during the cloning process.
Dial: 1-888-935-8880(Toll Free) Email: service@hisense-usa.com http://www.hisense-usa.com

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Author                          : mengqingfang
Create Date                     : 2014:02:13 15:52:04+08:00
Modify Date                     : 2014:02:13 15:52:04+08:00
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Format                          : application/pdf
Creator                         : mengqingfang
Title                           : 32K366-39K366-42A300快速页--20130620--CCX
Creator Tool                    : Adobe Illustrator CS4
Metadata Date                   : 2013:12:16 16:26:53+08:00
Thumbnail Width                 : 256
Thumbnail Height                : 192
Thumbnail Format                : JPEG
Thumbnail Image                 : (Binary data 28501 bytes, use -b option to extract)
Producer                        : Acrobat Distiller 10.1.9 (Windows)
Document ID                     : xmp.did:BFDCA47454D9E211BB1AD3943E321195
Instance ID                     : uuid:693d3a29-9787-4d24-a584-acee3f3c4b7a
Rendition Class                 : proof:pdf
Original Document ID            : uuid:1d360e61-a35d-4e9d-b6b8-5cd0cf766960
Derived From Instance ID        : uuid:a6feff86-d116-4630-8550-52be2559c919
Derived From Document ID        : xmp.did:15836B5BC5D7E21196D3AE3EC0F3BD54
Derived From Original Document ID: uuid:1d360e61-a35d-4e9d-b6b8-5cd0cf766960
Derived From Rendition Class    : proof:pdf
History Action                  : saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved
History Instance ID             : xmp.iid:01801174072068118C09ED788A3DCB9B, xmp.iid:04801174072068118C09ED788A3DCB9B, xmp.iid:05801174072068118C09ED788A3DCB9B, xmp.iid:06801174072068118C09ED788A3DCB9B, xmp.iid:07801174072068118C09ED788A3DCB9B, xmp.iid:08801174072068118C09ED788A3DCB9B, xmp.iid:09801174072068118C09ED788A3DCB9B, xmp.iid:0A801174072068118C09ED788A3DCB9B, xmp.iid:A63B029E122068118C09ED788A3DCB9B, xmp.iid:A73B029E122068118C09ED788A3DCB9B, xmp.iid:A83B029E122068118C09ED788A3DCB9B, xmp.iid:A93B029E122068118C09ED788A3DCB9B, xmp.iid:5BAB362EA2F1E111B810931D2870E948, xmp.iid:631D6FB844FDE1118CD0F894A6D39F73, xmp.iid:2277B2396105E211BF1BCD3CD4835623, xmp.iid:67428C8BF432E2118E59DEEFD0D43692, xmp.iid:9E7BAE231C35E2119DE2D3D629F1EB38, xmp.iid:11CB7A777937E2118A24DE9567A4056F, xmp.iid:95FC582B4038E21190C5CBFE9781D613, xmp.iid:4FFBD29FD339E211A635B8CEBFACAA17, xmp.iid:63B988DC353DE211A559D95E65DEAACA, xmp.iid:4DDA2F9DDC4BE211AA4A8719E561607C, xmp.iid:6055EAA3964DE211B651D55A38B9733A, xmp.iid:11C07098837DE211A4BCCED607F1F024, xmp.iid:13C07098837DE211A4BCCED607F1F024, xmp.iid:15C07098837DE211A4BCCED607F1F024, xmp.iid:B2F1F3CBF789E211B6B4DDF83E342A3A, xmp.iid:15836B5BC5D7E21196D3AE3EC0F3BD54, xmp.iid:BFDCA47454D9E211BB1AD3943E321195
History When                    : 2012:08:02 13:39:54+08:00, 2012:08:02 14:38:20+08:00, 2012:08:02 14:39:25+08:00, 2012:08:02 14:47:40+08:00, 2012:08:02 14:48:47+08:00, 2012:08:02 14:49:51+08:00, 2012:08:02 14:52:21+08:00, 2012:08:02 14:55:58+08:00, 2012:08:02 14:59:48+08:00, 2012:08:02 15:00:53+08:00, 2012:08:02 15:03:13+08:00, 2012:08:02 15:05:46+08:00, 2012:08:29 14:24:26+08:00, 2012:09:13 14:27:19+08:00, 2012:09:23 17:32:04+08:00, 2012:11:20 17:27:46+08:00, 2012:11:23 11:16:14+08:00, 2012:11:26 11:29:20+08:00, 2012:11:27 11:11:43+08:00, 2012:11:29 11:19:45+08:00, 2012:12:03 18:43:39+08:00, 2012:12:22 10:09:27+08:00, 2012:12:24 14:53:36+08:00, 2013:02:23 14:38:12+08:00, 2013:02:23 15:23:36+08:00, 2013:02:23 15:52:47+08:00, 2013:03:11 11:00:14+08:00, 2013:06:18 11:15:41+08:00, 2013:06:20 10:52:33+08:00
History Software Agent          : Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS5, Adobe Illustrator CS5, Adobe Illustrator CS5, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS5, Adobe Illustrator CS5, Adobe Illustrator CS5, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4
History Changed                 : /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /
N Pages                         : 1
Has Visible Transparency        : True
Has Visible Overprint           : True
Max Page Size W                 : 574.001312
Max Page Size H                 : 426.000182
Max Page Size Unit              : Millimeters
Font Name                       : ArialMT, ArialNarrow, Arial-BoldMT, Arial-ItalicMT, Consolas, MyriadPro-Black, MyriadPro-BoldIt, MyriadPro-Regular, Tahoma, Verdana, SimHei, SimSun
Font Family                     : Arial MT, Arial, Arial, Arial, Consolas, Myriad Pro, Myriad Pro, Myriad Pro, Tahoma, Verdana, 黑体, 宋体
Font Face                       : Regular, Narrow, Bold, Italic, Regular, Black, Bold Italic, Regular, Regular, Regular, Regular, Regular
Font Type                       : Type 1, Open Type, Open Type, Open Type, Open Type, Open Type, Open Type, Open Type, Open Type, Open Type, Open Type, TrueType
Font Version                    : 001.001, Version 2.37, Version 5.06, Version 5.06, Version 5.22, OTF 1.006;PS 001.000;Core 1.0.23;hotunix 1.28, Version 2.062;PS 2.000;hotconv 1.0.57;makeotf.lib2.0.21895, Version 2.062;PS 2.000;hotconv 1.0.57;makeotf.lib2.0.21895, Version 5.06, Version 5.03, Version 5.01, Version 5.03
Font Composite                  : False, False, False, False, False, False, False, False, False, False, False, False
Font File Name                  : _A______0.PFB; _A______0.PFM, ARIALN.TTF, arialbd.ttf, ariali.ttf, CONSOLA.TTF, MyriadPro-Black.otf, MyriadPro-BoldIt.otf, MyriadPro-Regular.otf, tahoma.ttf, verdana.ttf, simhei.ttf, simsun.ttc
Plate Names                     : Cyan, Magenta, Yellow, Black
Swatch Groups Group Name        : 默认色板组
Swatch Groups Group Type        : 0
Page Count                      : 1

EXIF Metadata provided by EXIF.tools