Hisense Electric LCDD0064 LED LCD TV User Manual W9HLCDD0064 7
Hisense Electric Co., Ltd. LED LCD TV W9HLCDD0064 7
Contents
W9HLCDD0064_User Manual 7
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3180552 |
| Application ID | pQUt3bGEt/2yvm6eV3wxKg== |
| Document Description | W9HLCDD0064_User Manual 7 |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | Yes |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 71.33kB (891681 bits) |
| Date Submitted | 2016-10-31 00:00:00 |
| Date Available | 2016-11-01 00:00:00 |
| Creation Date | 2016-06-07 15:59:08 |
| Producing Software | Adobe PDF Library 10.0.1 |
| Document Lastmod | 2016-10-21 13:31:36 |
| Document Title | W9HLCDD0064_User Manual 7 |
| Document Creator | Adobe InDesign CS6 (Macintosh) |
Completing the First-Time Setup Menu Now that you have attached the TV stand and connected your external devices, it's time to complete the first-time setup menu. Completing the First-Time Setup Menu Press the [Power] button on the remote to turn on the TV. A splash screen that shows the Hisense logo appears. Next, the First-Time Setup Menu begins by prompting you to choose your Language, Country, and Time Zone. After the splash screen that displays the Hisense logo appears, begin the first-time setup menu. Screen Language and Location Task 1. LANGUAGE AND LOCATION 2. Language Country English Language Time Zone United State Terms Mode Using the D-pad arrows of your remote, choose your Language, Country and Time Zone. Next, navigate to the Forward arrow and press OK. TIP: The edge of the drop-down boxes and the back and forward arrows change to blue when you select them. Select Network Input Done Terms of Service TERMS OF SERVICE 1. 2. Press [OK] on your remote to select Accept All. When you’re done, then navigate to the Forward arrow and press [OK]. Accept all The EULA and Terms must be accepted in order to continue. Accept EULA Accept Terms of Serv... Language Terms Mode Network Input Done TV Usage Mode TV USAGE MODE Select Home (which appears by default) and then navigate to the Forward arrow to press [OK]. TV Mode Home Home Mode Note: ‘Store mode’ should only be selected by Retailers who plan to demonstrate the TV. In Home Mode, your TV will automatically adjust the brightness of your screen based on the ambient light in the room. This mode is ENERGY STAR certified. Language Terms Mode Network Input Done 11 Completing the First-Time Setup Menu First-time Setup Menu (continued) Screen Network Connection Task If your TV does not automatically detect an Ethernet connection, then select Wi-Fi. When you’re done, select your network from the list that displays and move to the next screen. NETWORK CONNECTION Ethernet WiFi Connecting Ethernet Configure Language Terms Mode Network Input Done TV Input Source Select how you receive your TV channels. Choose from one of the following sources below and then move to the next screen. • TV • AV • Component • HDMI REMOTE BUTTON SETUP TV AV HDMI1 Language COMPONENT NOTE: If you use an antenna to receive channels, then you must complete the first-time setup menu in order to run a channel scan. HDMI2 Terms Mode Network Input Done Congratulations! Your TV is now ready to use. Press [OK] on your remote if you are fine with the selections that appear on the screen. Otherwise, navigate to the back arrow on the screen to change your selection. CONGRATULATIONS ! Your TV is now ready to use TV Selections English United States Eastern Home Mode Ethernet OK Language Terms Mode Network Input Done 12 TV Basic and Advanced TV Settings Your Hisense TV comes with many TV setting features to allow you to customize the picture based on your viewing preference and environment. Accessing the Quick Setup Menu You can press the [Quick Setup menu] button [ ] and press the right arrow on the D-pad to view the full menu settings. The Quick Setup menu consists of the following settings: Picture • Sound • Channel • Network • System • About TV • Picture Menu If you’d like to configure the settings for your picture, then there are six types of picture modes available: Vivid, Standard, Theater, Energy Saving, Game and Sport. Once you choose the mode, you can adjust the picture based on the following settings: Settings Picture Sound Brightness: Adjust the Brightness level to generate lighter or darker images. Channel Contrast: Adjust the Contrast level to increase or decrease how bright images appear. Network Color: Adjust the color intensity of the picture for a more vibrant image. Aspect Ratio: Adjust the Aspect Ratio to stretch or zoom in on your picture. You can choose from the following settings: Normal, Zoom, Wide, Cinema, 1:1 PIXEL MAP, Panoramic, Direct, Auto. Backlight: This TV has a Dynamic Backlight Control setting that you can set to off, high or low. The Backlight setting enables you to adjust how bright you want images to appear. In addition, an Eco Sensor setting is available that will enable the TV to automatically adjust the picture settings according to the amount of ambient light in your room. This is a money-saving feature because it reduces power consumption. Advanced Picture Settings: Adjust advanced picture settings based on your viewing preference. • Display: Adjust advanced picture settings in the component source. • OverScan: Change the video size settings to slightly crop the edges of the displayed image. • Tint: Adjust the colors from a green to magenta tint to view the natural skin tones of people on the screen. • Sharpness: Adjust how sharp or soft edges of images appear. • Noise Reduction: Improve how clear the picture appears by reducing noise. • Adaptive Contrast: Automatically darken dark areas and lighten light areas of images to see more details. • Color Temperature: Select a preset color temperature. • White Balance: Adjust the intensity of red, green and blue lights to view the true colors of all images in the picture. • Color Tuner: Adjust the Hue, Saturation and Brightness of color settings. Restore Default Picture Settings: Restore all the picture settings in the current picture mode to the factory default values. 13 System About TV Picture Mode Standard Brightness 50 Contrast 50 Color 50 Aspect Ratio Wide Backlight Advanced Picture Settings Restore Default Picture Settings Basic and Advanced TV Settings Sound Menu Sound Mode: Select a preset sound mode to suit the type of content you are listening to: Standard, Theater, Music, Speech and Late Night. Set the sound effects to suit your preference: Configure your audio settings for your sound preferences. Once you choose the mode, you can adjust the audio based on the following settings: d Audio Enhancements: Total Technology delivers the best possible audio experience from your TV. • Total Sonics: Optimizes overall sound quality by increasing bass, making dialog clear and natural, and widening the sound field. • Total Surround: Provides surround sound experience with psychoacoustic processing to place sounds beside, behind, and above the viewer. For best results use with Total Sonics. • Total Volume: Maintains consistent loudness levels from wide dynamic range programs, too-loud commercials, and channel or input changes. Settings Picture Sound Channel Network Sound Mode Standard Audio Enhancements Advanced Audio Settings Restore Default Audio Settings System About TV Advanced Audio Settings: Tune the audio settings and quality of the TV. • Equalizer: Boost the volume at different frequencies. • Lip Sync: Synchronize the displayed image with the audio output. • Balance: Adjust the left and right speaker strength to optimize audio for a specific location. • Digital Audio Out: Select the digital audio output format that best suits the audio device type. For example, choose RAW (which is uncompressed audio in RAW form) if you have 5.1 Channel Surround Sound Speaker set up. Choose PCM if you have an amplifier that does not support Dolby Digital technology. • Digital Audio Delay: Adjust the digital audio output delay time to sync sound from an external speaker with the images on the TV. • TV Speaker & ARC: Select the TV speaker or an external speaker for sound output. • Audio Out: Change the way audio is sent through the type of device that’s connected to your TV Audio Out port. Restore Default Audio Settings: Restore all of the audio settings in current audio mode to the factory default values. Channels Menu Tuner Mode: Select Tuner Mode if you receive TV channels over the air (antenna) or through a cable set top box. The input will be used during a channel scan. Auto Channel Scan: Automatically scan for channels to view programming from your TV source. Channel Skip: Skip a channel that your TV picked up during a previous channel scan search. Favorites List: Quickly access your most-watched channels by creating a Favorites list. Network Menu Network Configuration: Set up the network to gain full access of Smart TV features. • Connection Type: Ethernet Settings Picture Sound Channel Network Picture System About TV • Connection Type: Wireless Choose a wireless network connection to access the Internet. • Advanced Settings: Configure the advanced wireless network settings for the TV. 14 Channel Skip Favorites List Settings Network • IP Setting Mode: Configure the IP setting for your network connection. Auto Channel Scan About TV Channel • Ethernet: Display the network connection status. Antenna System Sound Choose a wired network connection to access the Internet. Tuner Mode Network Configuration Network Information Disconnected Anyview Stream On TV Name Smart TV Basic and Advanced TV Settings • Available Networks: Select an available network to connect. And you can also add wireless network or refresh wireless network. • Connection Type: Off Turn off the Internet connection. Network Information: View information about your network connection. Anyview Stream: Share video, music or other content from another device on to your TV screen. TV Name: Choose a name for your TV. The name will be shown to devices that are available for sharing data. System Menu Settings Location: Choose the location from where you will watch your TV. Picture Time: Set the current time based on your location. Sound • Time Zone: Select your time zone: Eastern, Indiana, Central, Mountain, Arizona, Pacific, Alaska and Hawaii. Channel • Time Format: Set the time to display in a 12 or 24-hour format. System • Daylight Savings: Select whether to apply Daylight Savings Time to the TV. Network About TV Location USA Time Language Parental Controls Application Settings Closed Caption CEC Function Advanced Settings • Date/Time: Set the Date and Time. • Power On Timer: Enable the Power On Timer to Off, Once or Daily. • Power Off Timer: Enable the Sleep Timer to Off, Once or Daily. • Sleep Timer: Set the sleep timer to automatically turn the TV Off within a specified time: Off, 10 Minutes, 20 Minutes, 30 Minutes, 40 Minutes, 50 Minutes, 60 Minutes, 90 Minutes and 120 Minutes. Language: Adjust the default language settings for the TV. Parental Controls: Turn On Parental Controls to block children from being able to view certain programs. The default password is 0000. • Locks: Enable or disables all locks. All selected locks can be turned off for parental viewing and easily turned on again. • Block Time: Block certain channels and programs during certain periods of time. • Channel Block: Block programs by channels when you turn On the Parental Controls feature. • Program Block: Block certain programs when your turn On the Parental Controls feature. • Input Block : Block content from devices that are connected to certain TV ports. • Change PIN: Change your PIN that you use to access Parental Controls. If you want to change your parental control password, first enter the new password then enter the same password again. NOTE If you forget your password, call the Hisense Consumer Electronics Care Center or reset your TV back to the factory settings. • Restore Parental Control Defaults: Restore Parental Control back to the factory default setting. Application Settings: Set settings for apps on your TV. • Netflix : Remove this TV from your Netflix account. Please contact Netflix if you want to stop being billed for you service. • ESN : Display the Netflix Electronic Serial Number. • VUDU : Remove this TV from your VUDU account. Please contact VUDU if you want to stop being billed for you service. Closed Caption: Adjust Closed Captioning settings. • Analog Caption: Select an Analog Caption setting from Off, CC1-CC4, Text 1-TEXT4. 15
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Tagged PDF : Yes XMP Toolkit : 3.1-701 Create Date : 2016:06:07 15:59:08+08:00 Metadata Date : 2016:10:21 13:31:36+08:00 Modify Date : 2016:10:21 13:31:36+08:00 Creator Tool : Adobe InDesign CS6 (Macintosh) Instance ID : uuid:c66e0a28-613c-415f-a4b0-b86dbf049d7b Original Document ID : xmp.did:2E025DAB6B1AE1118638882CBCDE8A8A Document ID : xmp.id:D816AC740720681183D1FFC2708FA0D3 Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:D616AC740720681183D1FFC2708FA0D3 Derived From Document ID : xmp.did:22ED77314520681183D1A5B586C80D5B Derived From Original Document ID: xmp.did:2E025DAB6B1AE1118638882CBCDE8A8A Derived From Rendition Class : default History Action : converted History Parameters : from application/x-indesign to application/pdf History Software Agent : Adobe InDesign CS6 (Macintosh) History Changed : / History When : 2016:06:07 15:59:08+08:00 Format : application/pdf Producer : Adobe PDF Library 10.0.1 Trapped : False Has XFA : No Page Count : 5 Creator : Adobe InDesign CS6 (Macintosh)EXIF Metadata provided by EXIF.tools