Hisense Electric LCDF0006 LCD Monitor User Manual

Hisense Electric Co., Ltd. LCD Monitor

UserManual.wiki >

Hisense Electric >

LCDF0006 User Manual HTML Version

W9HLCDF0006_User Manual

42K316DW

46K316DW

50K316DW

English

www.hisense-usa.com

service@hisense-usa.com

ES-G121352

The lightning flash with arrowhead symbol, within an

equilateral triangle is intended to alert the user to the

presence of uninsulated dangerous voltage within the

to constitute a risk of electric shock.

The exclamation point within an equilateral triangle is

intended to alert the user to the presence of important

operating and maintenance (servicing) instructions in

the literature accompanying the appliance.

FCC Statement Energy Star

NOTE:

This equipment has been tested and found to comply with

the limits for a class B digital Device, pursuant to part 15

of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a

residential installation. This equipment generates, uses and

can radiate radio frequency energy and, if not installed and

used in accordance with the instructions, may cause harmful

interference to radio Communications. However, there is

no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference

to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to

try to correct the interference by one or more of the following

measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and the

receiver.

Connect the equipment into an outlet on a circuit different

from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician

for help.

FCC ID Number WiFi Module: WWMMN421V1

WARNING

The manufacturer is not responsible for any radio or TV

interference caused by unauthorized modifications to

this equipment. Such modifications could void the user's

authority.

NOTE

Where the MAINS plug or an appliance coupler is used

as the disconnect device, the disconnect device shall

remain readily operable.

Hisense and associated logos where applicable are registered trademarks of Hisense Group in the United States and/or other

Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.

owners.

TM) technology.

trademarks or registered trademarks of HDMI Licensing LLC.

Your Hisense TV is ENERGY STAR

qualified in the “energy saving” mode. It

meets strict energy efficiency guidelines

set by the U.S. Environmental Protection

Agency and Department of Energy.

ENERGY STAR is a joint program of

these government agencies, designed to

promote energy efficient products and practices. Changes

to certain features, settings, and functionalities of this TV

(i.e. TV Guide, Picture, Sound) can increase or change the

power consumption. Depending upon such changed settings,

the power consumption may exceed the limits required for

the ENERGY STAR qualification in the “energy saving”

mode.

Caution：

The Equipment complies with FCC radiation exposure limits

set forth for an uncontrolled environment.

III

Important Safety Instructions

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings. Install in accordance

with the manufacturer's instructions.

8. Do not install near any heat sources such as radiators,

heat registers, stoves, or other apparatus (including

amplifiers) that produce heat.

9. Do not defeat the safety purpose of the polarized or

grounding-type plug. A polarized plug has two blades with

one wider than the other. A grounding type plug has two

blades and a third grounding prong. The wide blade or the

third prong are provided for your safety. If the provided

plug does not fit into your outlet, consult an electrician for

replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched

particularly at plugs, convenience receptacles, and the

point where they exit from the apparatus.

11. Only use attachments/accessories

specified by the manufacturer.

12. Use only with cart, stand, tripod,

bracket, or table specified by the

manufacturer, or sold with the

apparatus. When a cart is used,

use caution when moving the cart/

apparatus combination to avoid injury from tip-over.

13. Unplug this apparatus during lightning storms or when

unused for long periods of time.

14. Refer all servicing to qualified service personnel.

Servicing is required when the apparatus has been

damaged in any way, such as power-supply cord or plug

is damaged, liquid has been spilled or objects have fallen

into the apparatus, the apparatus has been exposed to

rain or moisture, does not operate normally, or has been

dropped.

15. Apparatus should not be exposed to dripping or

splashing, and objects filled with liquids, such as vases,

should not be placed on the apparatus.

16. An outside antenna system should not be located in the

vicinity of overhead power lines or other electric light or

power circuits, or where it can fall into such power lines

or circuits. When installing an outside antenna system,

extreme care should be taken to keep from touching

such power lines or circuits, as contact with them might

be fatal.

17. Do not overload wall outlets and extension cords, as this

can result in a risk of fire or electric shock.

18. Do not push objects through any openings in this unit,

as they may touch dangerous voltage points or short out

parts that could result in fire or electric shock. Never spill

or spray any type of liquid into the unit.

19. If an outside antenna or cable system is connected to the

unit, be sure the antenna or cable system is grounded to

provide some protection against voltage surges and built-

up static charges, Section 810 of the National Electrical

Code, ANSI/NFPA 70, provides information with respect

to proper grounding of the mast and supporting structure,

grounding of the lead-in wire to an antenna discharge

unit, size of grounding conductors, location of antenna

discharge unit, connection to grounding electrodes, and

requirements for the grounding electrode.

20. When replacement parts are required, be sure the service

technician uses replacement parts specified by the

manufacturer or those that have the same characteristics

as the original part. Unauthorized substitutions may result

in fire, electric shock or other hazards.

21. Upon completion of any service or repairs to this unit,

ask the service technician to perform safety checks to

determine that the unit is in proper operating condition.

22. When you connect the product to other equipment, turn

off the power and unplug all of the equipment from the

wall outlet. Failure to do so may cause an electric shock

and serious personal injury. Read the owner's manual of

the other equipment carefully and follow the instructions

when making any connections.

23. Sudden high volume sound may cause hearing or

speaker damage. When you use headphones, (if the unit

is equipped with a headphone jack) keep the volume at a

moderate level. If you use headphones continuously with

high volume sound, it may cause hearing damage.

CONDENSATION:

Moisture will form in the operating section of the unit if the

unit is brought from cool surroundings into a warm room or

if the temperature of the room rises suddenly. When this

happens, unit's performance will be impaired. To prevent

this, let the unit stand in its new surroundings for about an

hour before switching it on, or make sure that the room

temperature rises gradually.

Condensation may also form during the summer if the unit is

exposed to the breeze from an air conditioner. In such cases,

change the location of the unit.

Important Safety Instructions

HOW TO HANDLE THE LCD PANEL:

Do not press hard or jolt the LCD panel. It may cause the

LCD panel glass to break and injury may occur.

If the LCD panel is broken, make absolutely sure that you

do not touch the liquid in the panel. This may cause skin

inflammation.

If the liquid gets in your mouth, immediately gargle and

consult with your doctor. Also, if the liquid gets in your eyes

or touches your skin, consult with your doctor after rinsing

for at least 15 minutes or longer in clean water.

Possible Adverse Effects on LCD Panel:

If a fixed (non-moving) pattern remains on the LCD Panel

for long periods of time, the image can become permanently

engrained in the LCD Panel and cause subtle but permanent

ghost images. This type of damage is NOT COVERED BY

YOUR WARRANTY. Never leave your LCD Panel on for long

periods of time while it is displaying the following formats or

images:

Fixed Images, such as stock tickers, video game patterns,

TV station logos, and websites.

Special Formats that do not use the entire screen. For

example, viewing letterbox style (16:9) media on a normal

(4:3) display (black bars at top and bottom of screen); or

viewing normal style (4:3) media on a widescreen (16:9)

display (black bars on left and right sides of screen).

The following symptoms are not signs of malfunction

but technical limitation. Therefore we disclaim any

responsibility for these symptoms.

LCD Panels are manufactured using an extremely high

level of precision technology, however sometimes parts

of the screen may be missing picture elements or have

luminous spots.

This is not a sign of a malfunction.

Do not install the LCD Panel near electronic equipment that

produces electromagnetic waves. Some equipment placed

too near this unit may cause interference.

Effect on infrared devices - There may be interference

while using infrared devices such as infrared cordless

headphones.

Declaration of Conformity

This device complies with part 15 of the FCC Rules.

Operation is subject to the following two conditions:

(1) This device may not cause harmful interference and (2)

This device must accept any interference received, including

interference that may cause undesired operation.

Your TV also contains material that can be recycled and

reused. For disposal or recycling information, contact your

local authorities or the Electronic Industries Alliance at

www.eia.org to find a recycler in your area.

The LCD panel contains almost 3 million thin film transistors,

which provide exceptionally sharp video quality. Occasionally,

a few non-active pixels may appear on the screen as a

fixed black (in the case of a dead pixel), blue, green, or red

point. These non-active pixels do not adversely affect the

performance of your TV, and are not considered defects.

TO USE AC POWER

1. The power cord is attached to the TV at the factory.

2. Connect the AC cord into an AC outlet.

End of life directives

Non-active pixels

Power source

WARNING

Do not connect this unit to the power using any device

other than the supplied AC cord. This could cause fire,

electrical shock, or damage.

Do not use with a voltage other than the power voltage

specified. This could cause fire, electrical shock, or

damage.

CAUTION

When this unit is not used for a long time, (e.g., away on

a trip) in the interest of safety, be sure to unplug it from

the AC outlet.

Do not plug/unplug the AC cord when your hands are

wet. This may cause electrical shock.

Important Safety Instructions

Disclaimer: Hisense USA companies ("Hisense"). A wired

or wireless Internet connection is required for certain features

and is not included with the television; please contact a

local Internet Service Provider for assistance. Content

suppliers may require a subscription to activate or use their

services which is not included with the television and is sold

separately. The Hisense TV web browser supports a variety

of multimedia platforms however it does not support all

players nor does it support every player version, therefore,

access to certain web content may be limited or unavailable.

INTERNET CONNECTION, ACCEPTANCE OF END USER

LICENSE AGREEMENT (EULA) AND REGISTRATION

OF YOUR HISENSE TELEVISION SERIAL NUMBER IS

REQUIRED. YOU MUST BE AT LEAST 13 YEARS OF AGE

TO REGISTER ONLINE. HISENSE MAY ADD, DELETE,

MODIFY, OR TERMINATE ONLINE SERVICES WITHOUT

NOTICE.

Consent to Use of Data: To facilitate the provision of

software updates, any dynamically served content, product

support and other services you agree that Hisense and its

affiliates may collect, use, store and transmit technical and

related information that identifies your television (including an

Internet Protocol Address), its operating system, application

software and any connected devices. Hisense and its

affiliates may also use this information in the aggregate, in

a form which does not personally identify you, to improve

our products and services and we may share anonymous

aggregate data with our third party service providers.

Internet Performance Issues: A broadband Internet

connection is required for access to Internet Apps and

Content. To avoid poor performance while accessing Internet

Apps and Content, be sure other devices on the same

Internet connection are not running file sharing applications,

streaming audio or video content and are not logged in

to chat-rooms. These applications may consume your

connection’s bandwidth, causing lag or other undesirable

effects. This television uses TCP and UDP port(s) to access

Internet Apps and Content. Please consult your router or

personal firewall documentation for information on how to

allow access to these ports. If you are installing this television

on a corporate Internet connection, contact your network

administrator for information and assistance.

Liability: The Hi-Smart portal may be linked to other

sites on the World Wide Web or Internet which are not

under the control of or maintained by Hisense. Such

links do not constitute an endorsement by Hisense. You

acknowledge that Hisense is providing these links to you

only as a convenience; you further agree that Hisense is not

responsible for the content of such sites.

INFORMATION ACCESSED OR OBTAINED VIA Hi-

Smart IS PROVIDED "AS IS" WITHOUT WARRANTY

OF ANY KIND, EITHER EXPRESS OR IMPLIED,

INCLUDING BUT NOT LIMITED TO, THE IMPLIED

WARRANTIES OF MERCHANTABILITY, FITNESS FOR

A PARTICULAR PURPOSE, OF NON INFRINGEMENT.

SOME JURISDICTIONS DO NOT ALLOW FOR THE

EXCLUSION OF IMPLIED WARRANTIES, SO THE ABOVE

EXCLUSIONS MAY NOT APPLY TO YOU.

Access to certain areas of the Hi-Smart portal is restricted

and requires a password for entry. If you are an authorized

password holder, you agree that you are entirely responsible

for the confidentiality of your password and account

information, and agree to notify Hisense immediately if your

password is lost, stolen, disclosed to an unauthorized third

party, or other wise may have been compromised. You agree

that you are entirely responsible for any and all activities

which occur under your account, including any fees which

may be incurred under your password protected account

whether or not you are the individual who undertakes such

activities. You agree to immediately notify Hisense of any

unauthorized use of your account or any other breach of

security in relation thereof known to you.

You acknowledge that Hi-Smart may include certain

inaccuracies or typographical errors which may affect the

quality of materials and third-party content. You acknowledge

that the materials or any third-party content have not been

independently verified or authenticated in whole or in part

by Hisense, and agree that Hisense does not warrant the

accuracy or timeliness of materials or the third-party content,

and further agree that Hisense has no liability for any

omissions in the materials and content, whether provided by

Hisense or any third-party.

To the maximum extent permitted by applicable law, Hisense

shall not be liable to you or a third-party claiming through

you for any damage suffered as a result of your displaying,

copying or downloading information or material accessed or

obtained via Hi-Smart. In no event shall Hisense be liable

to you or any third-party for any indirect, extraordinary,

exemplary, punitive, special incidental or consequential

damages (including loss of data, revenue, profits or other

economic advantage) however arising, whether for breach

or in tort even if HISENSE has previously advised of the

possibility of such possible damage.

Technical Support: If you have questions regarding

installation, configuration or operation of this product, please

telephone a Hisense Customer Care representative who

will be happy to assist you with any difficulties you may be

experiencing.

Dial: 1-888-935-8880 (Toll Free)

Email: service@hisense-usa.com

Contents

Getting Started

Accessories List...............................................................................................3

Installing the Stand ..........................................................................................3

Installing a Wall-Mount Bracket .......................................................................4

When Installing the TV Against a Wall or Enclosed Area ................................ 5

Viewing the Control Panel ............................................................................... 6

Viewing the Remote Control ............................................................................7

Installing Batteries in the Remote Control ....................................................... 8

Making Connections ........................................................................................9

Basic Features

Turning the TV on or off ..................................................................................13

Turning the TV On for the First Time ..............................................................13

Selecting the Input Source .............................................................................13

Changing Channels / Volume ......................................................................... 14

Shortcuts Instructions .....................................................................................14

To Use the Menu ............................................................................................15

Using the Picture Menu .................................................................................. 15

Using the Audio Menu ....................................................................................16

Using the Screen Menu ..................................................................................17

Using the Channels Menu .............................................................................. 17

Using the Settings Menu ................................................................................18

Using the Lock Menu ......................................................................................19

Advanced Features

Network Connection ....................................................................................... 20

DLNA Settings ................................................................................................23

Media Share Settings in Computer.................................................................24

Settings to Share Files ...................................................................................24

Contents

Advanced Features

Network Function............................................................................................25

Enter the Network Applications....................................................................... 26

VUDU HD Movies ...........................................................................................26

VUDU Apps ....................................................................................................28

..............................................................................................................28

Opera..............................................................................................................29

YouTube .........................................................................................................31

Other Apps......................................................................................................32

Other Information............................................................................................33

Digital Media Player ........................................................................................34

Enjoy Video Files ............................................................................................34

Enjoy Music Files............................................................................................35

Browse the Pictures........................................................................................35

Browse the Text Files .....................................................................................36

Other Information

Trouble Shooting ............................................................................................37

General ...........................................................................................................39

Illustrations are for your reference only!

Getting Started

Accessories List

Installing the Stand

USER MANUAL Quick Setup Guide Warranty Card

User Manual Quick Setup Guide Warranty Card Remote Control Battery × 2 Spacer × 4

NOTES

1. The LCD display is very fragile, and must be protected at all times when removing the base stand. Be sure that no hard or

sharp object, or anything that could scratch or damage the LCD display, comes into contact with it. DO NOT exert pressure

on the front of the TV at any time because the screen could crack.

2. For tabletop use, the TV must be attached to the provided stand as shown on this page.

3. To Wall-Mount, brackets (not provided) must be attached to the TV as shown on next page.

Follow the illustrations below to complete the installation steps:

1. Place your TV on a soft cushioned surface carefully to prevent the screen from scrathing as shown in Figure 1.

2. Align the ridge on the column with the groove in the base plate, then insert the stand column into the base plate, make

sure the FRONT of stand column match the FRONT of base plate. Secure the stand column to the base plate with the four

provided Screws A. See Figure 2.

WARNING

Be sure to disconnect the AC power cord before installing a stand or Wall-Mount brackets.

CAUTION

Use a covered table or bench to lay the TV on and handle the TV carefully to prevent damage to the TV screen or cabinet

during assembly.

Screw A (M4 × L12)

Screws: ScrewA (M4×L12)×6 ScrewB (ST4×L14)×2 ScrewC (M5×L12)×4 ScrewD (M6×L25)×4

soft cloth

EN-33921A

MMTTSS//SSAAPP

DDIISSPPLLAAYY

SSOOUUNNDD

MMUUTTEE

CCCCDD

EEXXIITT

CCOOMMPPOONNEENNTT

HHDDMMII

RREETTUURRNN

GGUUIIDDEE

MMEENNUU

HHii--DDMMPP

VVGGAA

IINNPPUUTT

PPIICCTTUURREE

33DD

LLAASSTT

FFAAVV

Hii--Smmaarrtt

AASSPPEECCTT

SSLLEEEEPP

EENNTTEERR

Getting Started

Installing a Wall-Mount Bracket

If you want to attach the TV to a Wall-Mount bracket (not provided), you should first remove the stand if it is pre-attached (see

Step 1).

1. Make sure the TV is laid face-down on a clean, safe,

and cushioned space, remove the original screws in the

bracket holes on the TV back over.

3. Follow instructions provided with the Wall-Mount bracket.

If you are not sure of your ability to do complete the installation, contact a professional installer or service technician for

assistance. The manufacturer is not responsible for any damages or injuries that occur due to mishandling or incorrect

assembly.

The selected screws are 6.5 ~ 7.5 mm in length when measured from the attaching surface of the TV's rear cover. The

diameter and length of the screws differ depending on the Wall-Mount Bracket model.

2. tekcarb gnidnopserroc eht ni srecaps dedivorp eht ecalP

holes. Attach purchased bracket (1.5 ~ 2.5 mm thickness)

on the TV with 4 screws (M6 × L25) which in accessories

bag. Follow instructions provided with the wall bracket.

WARNING

Use only the 4 screws (M6 × L25) provided with the TV to prevent internal damage to the TV set or cause it to fall.

3. Align the stand cover with the stand column, then secure the stand column to the stand cover vertically with the two provided

Screws A and horizontally with the two provided Screws B. See Figure 3.

4. Align the stand cover with the screw holes on the bottom of TV back, secure the stand to the TV with the four provided

Screws C. See Figure 4.

Screw A (M4 × L12)

Screw C (M5×L12)

Screw B (ST4×L14)

Screw D (M6 × L25)

Spacer × 4 Bracket

(1.5~2.5mm)

Getting Started

When Installing the TV Against a Wall or Enclosed Area

Install with stand

Never install the TV set as follows:

Install on the wall

Wall-Mount Bracket

6.5 ~ 7.5 mm

Screw

Spacerthe TV's rear cover

Wall-Mount hole pattern VESA (mm) 400 × 400

Wall-Mount screw size (mm) M6

Make sure that your TV has adequate air circulation. Allow enough space around the TV as shown below. Avoid operating the

TV at temperatures below Inadequate air 41°F (5°C).

Leave at least this much

space around the set.

Leave at least this much

space around the set.

4 inches

(10cm)

4 inches

(10cm) 4 inches

(10cm)

4 inches

(10cm)

4 inches

(10cm)

23»8 inches

(6cm)

12 inches

(30cm) 12 inches

(30cm)

Wall Wall

Air circulation is blocked.

Inadequate air circulation can lead to overheating of the TV and

PD\FDXVHGDPDJHWR\RXU79RUFDXVHD¿UH

Viewing the Control Panel

Getting Started

Power indicator

Item Description

Power indicator Light up when the power is on.

Remote sensor Receives remote signals from the remote control.

Do not put anything near the sensor, as its function may be affected.

MENU Display an on-screen menu to setup your TV’s features.

INPUT Select among the different input signal sources.

VOL

/ V Adjust the volume.

VSelect the channel.

Power button

3D emitter

Turn on the TV or put the TV in standby mode.

Caution: The TV continues to receive power even in standby mode.

Unplug the power cord to disconnect power.

Sends signals to 3D glasses during playback of 3D movies and TV shows.

NOTES

FOR ILLUSTRATION ONLY.

Powering up or down the TV requires several seconds of processing time. Do not rapidly turn the TV on/off as abnormal

operation may occur.

Remote sensor

3D emitter

VOL

INPUT

Volume

Channel

Volume V

Channel V

Viewing the Remote Control

Getting Started

NOTES

FOR ILLUSTRATION ONLY.

[RED/GREEN/YELLOW/BLUE] buttons are used for Electronic Program Guide (EPG), Hi-Smart Hub and Digital Media Player

(DMP). After pressing the [GUIDE], [Hi-Smart] or [Hi-DMP] button, the same color buttons will appear with explanations in the

on-screen display (OSD). Follow the steps shown in the OSD.

Power on/off

Increase Volume

Select sound mode

Decrease Volume

Return to the previous menu

Select picture mode

Mute button

Menu button

Dash button

(use when entering a digital sub-channel

▲/

▲

Navigate Up/Down/Left/Right or

adjust on-screen menu settings

Displays the information banner

Open the DTV program guide

Confirm selections

(if available)

3D button

Display the favorite channel list

Zoom Button

Set the sleep timer

Enter the VUDU HD Movie

Close the menu

Next channel

Previous channel

Select input source

Adjust Closed Caption (CCD) mode

Audio select button

Direct channel selection

Special function buttons

Media content control function buttons

Go to the previous channel

Enter the NETFLIX instant streaming

Open the Hi-Smart Hub

EN-33921A

MMTTSS//SSAAPP

DDIISSPPLLAAYY

SSOOUUNNDD

MMUUTTEE

CCCCDD

EEXXIITT

CCOOMMPPOONNEENNTT

HHDDMMII

RREETTUURRNN

GGUUIIDDEE

MMEENNUU

HHii--DDMMPP

VVGGAA

IINNPPUUTT

PPIICCTTUURREE

33DD

LLAASSTT

FFAAVV

Hii--Smmaarrtt

AASSPPEECCTT

SSLLEEEEPP

EENNTTEERR

Hi-DMP (digital multimedia player) button

Select COMPONENT input source

Select HDMI input source

Select VGA input source

Installing Batteries in the Remote Control

Getting Started

1. Slide the back cover to open the battery compartment of the remote control.

2. Insert two AAA size batteries. Make sure to match the (+) and ( - ) ends of the batteries with the (+) and ( - ) ends indicated in

the battery compartment.

3. Close the battery compartment cover.

1Gently push and slide 2Insert the batteries 3Gently push and slide

NOTES

1. Dispose of your batteries in a designated disposal area. Do not throw the batteries into a fire.

2. Do not mix battery types or combine used batteries with new ones.

3. Remove depleted batteries immediately to prevent battery acid from leaking into the battery compartment.

4. If you do not intend to use the remote control for a long time, remove the batteries.

5. Batteries should not be exposed to excessive heat, such as sunshine, heat registers, or fire.

6. Battery chemicals can cause a rash. If the batteries leak, clean the battery compartment with a cloth. If chemicals touch your

skin, wash immediately.

7. Do not mix old and new batteries.

8. Do not mix alkaline, standard (carbon-zinc) or rechargeable (ni-cad, ni-mh, etc.) batteries.

Program Your Universal Cable or Satellite Remote Control to Operate Your New Hisense Television!

If you would like to program your other household remote controls to your new Hisense television, please consult the User’s

Manual supplied by your Cable or Satellite provider. The Cable or Satellite providers’User’s Manuals should include instructions

on how to program their remote to your television.

Below is a list of Hisense codes for the most common Cable and Satellite providers. Use the Hisense code that is associated

with your Cable or Satellite provider(if applicable).

DIRECTV ..............................................0178 or 10019

Time Warner Cable .............................. 386 or 0178

Comcast................................................ 0178 or 10178

Cox Communications ........................... 0178

Dish Network ........................................ 627 or 505

If the Hisense code associated with your Cable or Satellite provider is not listed above, if the code above does not work, or if

you cannot locate the instructions for programming your household remote to your television, call your local Cable or Satellite

provider’s customer service center.

If your Cable or Satellite provider does not have an Hisense code available, please visit http://www.hisense-usa.com for

additional codes.

HDMI2 HDMI1

ITA

AUDI

CABLE

EADPH

IDE

V I

DVI

DMI4 HDMI

akin

Connections

Getting Started

AN USB USB VG

HDMI HDMI

EADPHONE

CABL

COMPONENT

ower

HDMI

IGITAL

UDIO I

Descri

tion

NT/

ABLE

onnect an antenna or cable TV to this jack.

HDMI

DMI

(

High-De

inition Multimedia Inter

ace

)

provides an uncompressed,

ll digital audio/video inter

ace between this TV and any HDMI-device,

as a set-top

ox,

u-ray

sc p

ayer or

A/V

rece

ver.

NENT

onnect to a DVD player, Digital

et-Top-Box or other A/V devices with

omponent

(

)

video and audio output jacks.

IDEO/AUDIO

(

L,R

)

onnect to the composite video and audio

(

L/R

)

output jacks on external

deo

ces

C/DVI A

t t

ces

with

A int

ace

EADPH

onnect headphone for private listenin

ITAL A

onnect to an external di

ital audio device.

ort for Di

ital Media Pla

er and for char

lasses.

LAN

cab

access

r th

Int

NOT

ome external devices impossible insert to this set

or individual di

erence. Please replace with appropriate external signal

e or

ncrease t

e a

apter to matc

e port

n suc

case.

Getting Started

heck the

acks for position and t

pe before makin

connections. Loose connections can result in ima

e or color

ems.

e sure t

at a

connect

ons are t

t an

secure.

ot all A

V devices have the ability to connect to a TV, please re

er to the user’s manual o

your A

V device

or compatibility

nd connections procedure.

ways unp

ug t

e power cor

en connect

ng externa

equ

pment.

onnecting an antenna, cable or cable/satellite bo

onnectin

an A/V Device with

omposite

able

rANT OU

abl

HF Antenn

EXTERNAL DEVICESTV JACK

urn off the TV before connectin

the antenna.

onnect one end of a coaxial cable (not included) to the RF OUT jack on the antenna, cable or cable/satellite box. If you are

sing an antenna with twin-lead cable, you may need a 300-75 ohm adapter (not provided) to connect it to the back of your

V. Likewise, if

ou are usin

several antennas,

ou ma

need a combiner

(

not provided

)

onnect the other end of the cable to the ANT/CABLE IN jack on the side of your TV.

se the audio and video cables to connect the external A/V device’s composite video/audio jacks to the TV’s jacks. (Video =

ellow, Audio Left = white, and Audio Right = red)

the connected devices into the mains socket before switchin

on the TV.

elect the correspondin

source from the TV.

NT/CABLE

quipment with A

V jacks

Player

Recorde

deo

amer

EXTERNAL DEVICES

et-to

atellite Receive

atellit

OUT

deo

hite

(

)

hite

(

)

()

ellow

(

Video

)

Yellow

(

Video

)

(

)

Red

(

)

TV JACK

IDEO

AV IN

able

(not included

)

Getting Started

onnecting an A/V Device with Component (YP

)

Cable

Connecting an A/V Device with HDMI Cable

Connectin

a headphon

se a component cable to connect the external A/V device’s component output

acks to the TV’s YP

acks. Use an audio

cable to connect the external A/V device’s component audio

acks to the

’s AUDIO

(

L/R

)

acks.

Plu

the connected devices into the mains socket before switchin

on the TV.

Select the correspondin

source from the TV.

upport digital connections between HDMI - enabled AV devices such as PVR, DVD, Blu-Ray, AV receiver and digital

ces

ome devices such as PVR or DVD player require HDMI signal to be set to output in the device's settings.

lease consult your device user manual

or instructions.

se an HDMI cable to connect the A

V device’s HDMI output jack to the TV’s HDMI jack.

lug the connected devices into the mains socket be

ore switching on the TV .

elect the corresponding source

rom the TV.

ones or an ana

og soun

ar can

e connecte

he HEADPH

NE output on your set.

(

While the headphone

s connected, the sound

rom the built-in speakers will be

isabled.

)

Equipment with A/V

ack

DVD Pla

er/Recorder

Vid

amera

EXTERNAL DEVICES

et-top box

Satellite Receiver

atellit

enn

cab

hite

White

(

)

()

(

)

Red(R)

()

udio Cable

(

not included

)

onent Cable

(

not included

)

TV JACK

Com

onen

HDMI

TV JACK

EXTERNAL DEVICES

DVD

Set-to

EADPH

EXTERNAL DEVICESTV JACK

he HDMI connector provides both video and audio si

nals, it’s not necessar

to connect an audio cable.

Getting Started

onnecting a PC with VGA Cabl

onnectin

an Audio Receiver with Di

ital Audio out cabl

se a VGA cable to connect the PC’s VGA output

ack to the TV’s VGA

ack. Use an audio cable to connect the PC’s audio

utput

ack to TV’s PC/DVI AUDIO IN

ack.

the connected devices into the mains socket before switchin

on the TV.

elect the correspondin

source from the TV.

se a coaxial cable to connect the A/V device’s di

ital audio in

ack to the TV’s DIGITAL AUDIO OUT

ack.

the connected devices into the mains socket before switchin

on the TV.

elect the correspondin

source from the TV.

NOTES

rimarily this unit is intended

or use as an L

D TV. I

you want to use it as a monitor, please contact the manu

acturer o

the

Video

raphic's card

urther support. Per

ect compatibility is not guaranteed.

he V

A cable will not supplied with the product.

e strongly recommend to use V

A cable with 2

errite cores as shown in the

igure.

NOTES

hen a digital audio system is connected to the DI

ITAL AUDI

(CO

AXIAL

)

jack, decrease the volume o

both the TV

nd the s

stem.

.1 CH

(

channel

)

audio is available when the TV is connected to an external device supportin

5.1 CH.

hen the receiver (home theater) is set to on, you can hear sound output from the TV’s digital audio out jack. When the TV

s receivin

a DTV si

nal, the TV will send 5.1 CH sound to the home theater receiver. When the source is connected to the

V via HDMI, onl

2 CH audio will be heard from the home theater receiver. If

ou want to hear 5.1 CH audio, connect the

ital audio out

ack from

our DVD/Blu-ra

pla

er/cable box/STB satellite receiver directl

to an amplifier or home theater.

TV JACKS

EXTERNAL DEVICES

ower

ess

Bass

peaker

eaker

$XGLR$P

OL¿H

ITA

UDI

onnecting an ethernet cable to access a network or the Internet

onnect an ethernet cable to access a network or the Internet. TV also features wireless connectivit

. For more information,

ee “Network

onnection”.

EXTERNAL DEVICES

Com

ute

TV JACK

DVI

Basic Features

e sure t

at you

ave:

nsta

e remote contro

atter

es.

onnected an antenna or cable.

onnected the

ower cord.

ntr

l with

ess

[

POWER

]

Setu

menu displa

ess

[

▲

]

lan

anish or French,

ress

[

ENTER

]

button to confirm.

ess

[

▲

]

cture

ome

Retail Mode, press [ENTER] button to con

irm.

ect

eta

sage

appea

“

ure

wan

ail

ode

”

ele

“

”

elect

“

No” to change your selection.

irst,

ave

atch

emot

ontrol with T

o turn your

f (standby mode):

the power cord into an

ower outlet.

ess

[

POWER

]

utton

our

V t

res

[

POWE

]

gain

our

urn o

f your

t goes

nto stan

y mo

app

ears

will

enu

anguage

cture

ner Mode and

hannel Installation.

ected

ess

ect

urnin

the TV

or the First

ning

nerg

rea

[

▲

]

ect

our

ode:

able,

ress

[

ENTER

]

button to confirm.

ess

[

▲

]

Sca

can,

ress

[

ENTER

]

button to confirm.

“S

can”

automat

lly

hanne

Installation available in

our viewin

area.

“

”

scan

anne

Dependin

rece

min

com

Please allow the

rocess to com

lete without interru

tion

ARNING

mode

ill

rece

ivin

owe

sco

nplu

owe

npu

gna

era

nutes,

t automat

y goes

nto stan

y mo

EXIT

Choose your menu Language

English

Español

Français

Select Next Exit

Back Select Next Exit

EXIT

Choose your Picture Mode

Home mode

Retail mode

Home mode default settings are recommended for in-home use.

ENERGY STAR® qualied.

Retail mode is intended for in-store display and resets video

settings at Power On.

EXIT

Please connect cable or antenna

Channel Installation

Status: Scanning...

ATV Program Installed: 3

DTV Program Installed: 2

Cancel

gna

rce

ore

orma

nee

ang

gna

ang

amp

ang

outs

ide

enn

ble

o select the video input source:

res

PUT

]

butto

remot

Input Source menu opens

res

[

▲

]

hli

rce

press

]

utton

ress

]

aga

you

urn

f your

t goes

nto stan

y mo

ect

Sou

INPUT

Component

VGA

HDMI 1

HDMI 2

HDMI 3

HDMI 4

Hi-DMP

EXIT

Select

Enter

Exit

Basic Features

Aspect - Select the screen aspect ratio from Normal, Wide,

Zoom and Cinema.

Normal: The original 4:3 aspect

ratio (1.33:1 signal) is preserved,

so black bars are added to the left

and right of the image. Standard TV

broadcasts are displayed with a 4:3

aspect ratio.

Wide: When watching a standard

broadcast or full-frame movie in

this mode, the display image is

stretched proportionately to fill

the TV screen. When watching a

widescreen (1.78:1 signal) program

or movie, the display image fills the

TV screen.

Zoom: Stretch the 4:3 aspect ratio

image vertically and horizontally to

fill the screen at 1:1.78 aspect ratio.

Cinema: Stretch the 4:3 aspect ratio

image vertically and horizontally to

fill the screen at 1:2.35 aspect ratio.

Shortcuts Instructions

DISPLAY - Display the information banner. The information

including channel number, channel name, current system

time, tuner mode, audio stream, video format, audio

language, closed caption mode, parental locks rated,

program details, etc.

GUIDE - Open the DTV program guide. The program guide

information is provided by the broadcasting company.

FAV - Display your Favorite List. You can add or delete

channels to create your favorite list.

Cursor up/down: Press [▲/

▲

] button to select the

option.

Add/Erase: Press [YELLOW] button to add or delete the

channel from Favorite List.

Page up/down: Press [RED/GREEN] button to page up

or down.

VUDU - VUDUTM is an on-demand, pay-per-view, service

that offers high-definition movies via the Web. You can

access the VUDU service by pressing this button.

Hi-Smart - Press to open the Hi-Smart Hub. The Hi-Smart

Hub provides convenient access to Services and Apps

which let you watch movies, TV shows, listen to music, and

much more.

NETFLIX - Press to open the Netflix interface. Netflix is an

online DVD and Blu-ray Disc rental service, offering instant

access to movies and TV shows to Netflix members. Netflix

unlimited membership required (subscription not included).

1. Press the [CH

/V] (or [CH +/-]) on the TV/remote control

to change the channel.

2. Press the [VOL

/V] (or [VOL +/-]) on the TV/remote

control to adjust the volume.

3. Press the numeric buttons on the remote control to

display the corresponding channels.

Changing Channels / Volume

NOTE

Changing the channels can also be achieved by directly

entering the channel number using the numeric keys on

the remote control. If you are entering a two or three digit

channel number, the time between key presses should be

less than 3 seconds.

Basic Features

se t

1Press the

[

]

button to o

en the main menu

2Press

[

▲

]

to select a menu o

tion, then

ress

[

▲

/ENTER

]

to enter the menu

3In each menu,

ou can:

Press

[

▲

]

to select an item,

Press

[

▲

]

to ad

ust the value, or

Press

[

▲

/ENTER

]

to enter the submenu,

Press

[

RETURN

]

to exit the submenu.

4Press

[

EXIT

]

button to exit the menu

R ILL

TRATI

NLY

ng t

cture

ou can ad

ust:

ctu

ode

- Ad

ust the Picture Mode. You can select

tandard, Theater, Ener

Savin

, Game, Custom or Vivid.

htness - Increase or decrease the bri

htness of the

icture. Increasin

the bri

htness can add more li

ht to dark

reas of the picture, while decreasin

the bri

htness can

dd more darkness to li

ht areas of the picture.

ast

- Increase or decrease the contrast of the

icture.

ncrease the contrast to ad

ust the white areas of the picture

r decrease the contrast to ad

ust the black areas of the

icture.

r - Ad

ust the level of color in the picture.

- Adjust flesh tones so the

appear natural.

har

ness - You can increase the shar

ness level for

learer ima

es or decrease the sharpness level for smoother

es.

ced

deo

- Access advanced video settin

s such as

olor Tem

erature,Noise Reduction and Ada

tive Contrast .

olor Tem

erature: Chan

e the color

erature. You

an select a

reset color tem

erature: Cool, Standard

rm.

educt

n: Optimize the picture qualit

filterin

nal interference. You can select Off, Low, Medium or

tive Contrast: Automaticall

adjusts the con

evel of the selected in

ut source.

Picture

Select Back

Automatically adjust

picture detail and

Color Temperature

Noise Reduction

Adaptive Contrast

Warm

Medium

hen 3D video is watched under the

luorescent lamp

(

50~60 Hz

)

or tri-band

luorescent tube, there may be

light

licker, so please adjust the illumination downward

r switch o

the light.

Certain functions, such as change aspect ratio,

are

t ratio,

are

vailable when watchin

3D movies and TV

ther brands 3D

lasses ma

not be supported.

Sit upri

ht facin

the TV when watchin

3D movies and

his TV su

orts automatic identification of common

3D formats when connected to HDMI V1.4 com

atible

ources. Other 3D sources re

uire manual setu

Enter Select Exit

Picture

Adjust image to suit

personal preferences.

Picture Mode

Brightness

Contrast

Color

Tint

Sharpness

Advanced Video

StandardStandard

brightness.

Basic Features

D - Enables playback of 3D movies and TV shows (requires

ompatible 3D glasses).

D M

ode

:Format may be set to: Off, 2D-to-3D, Side-by-

ide or To

-and-Bottom.

-R Switch: Flips the le

t and right

rames in

ide-by-

th of Field: Adjusts the ran

e of distance

(

focus

)

that

ppears acceptabl

sharp in a 3D ima

D-

-2D: Di

sab

ntifi

D f

urin

pla

back; forces 2D pla

back usin

onl

the Left

r Ri

ht frame.

Picture

Select Back

3D Mode.

3D Mode

L-R Switch

Depth of Field

3D-to-2D

Side-by-Side

O

hen 3D si

nal format is Frame Packin

, the ima

ill be displa

ed accordin

to the resolution of the

ncomin

nal.

or example: when the input si

nal is 1280×720, a

20p ima

e will be displa

ed. A 1920×1080 input

nal will be displa

ed in 1080p.

hen 3D si

nal format is Side-b

-Side, Top-and-

ottom, the ima

e is displa

ed full screen in half

esolution

(

960× 1080 or 1920×540 respectivel

ng t

You can adjust:

ound Mode

elect the

ound Mode:

tandard,

peech,

ser or

ance

Adjust the volume o

the le

t and right speakers

qua

zer

ten or enhance the sound at speci

requency points

Sound Surround -

imulates surround sound and enhances

ass response

Digital Audio

utput

end digital audio to an external

audio system. You can select P

M, RAW or

Off.

M outputs two channel audio regardless o

the

input

ormat

RAW:

Passes through

(

output = input

)

the incoming audio

signal without decoding. E.g. incoming Dolby Digital, DT

or P

M data stream is simply output as it is without any

process

Auto Volume

ontrol

utomat

y a

usts vo

ume to a

cons

stent

eve

; attenuates

passages

Audio

Select Back

Standard

O

PCM

O

Select a Sound mode

to achieve ideal sound.

Sound Mode

Balance

Equalizer

Sound Surround

Digital Audio Output

Auto Volume Control

Audio

Adjust Select Back

10DB

0DB

-10DB

120Hz

500Hz

1.5KHz

5KHz

10KHz

Basic Features

sing the Screen Menu

sing the Channels Men

ou can ad

ust:

n - Move the ima

e ri

ht or left.

n - Move the ima

e up or down.

ase

- Ad

ust the focus of stable ima

es.

k - Ad

ust the sample frequenc

uto Ad

ust - Detects input si

nal clock, phase and position

nd ad

usts TV displa

accordin

You can adjust:

uner

elect TV source: Antenna or

able

Auto

hannels

earch

cans

or channels that have

signals and stores the channels in

ormation in the channel

hannel

kip

ou can cance

a c

anne

store

n t

anne

avor

te L

Add or delete channels to create a

avorite

st.

ou can press

[FAV]

utton to

ay your

avor

elect the de

ault audio stream: Mono,

tereo o

o Language

elect the audio language: English,

spaño

rança

NOT

nly available in VGA mode.

Screen

Enter Select Exit

127 Image positioning

and PC settings.

H.Position

V.Position

Phase

Clock

Auto Adjust

Channels

Select Back

Select tuner connect

mode.

Tuner Mode

Auto Channel Search

Channel Skip

Favorite List

MTS

Audio Language

Antenna

Stereo

English

Cancel

Auto Scan

Status: Scanning... Antenna

Analog Channels: 0

Digital Channels: 0

hen

ou press [CH

/ V] button,

our TV skips

the channel

ou cancelled. You can still tune to the

channel usin

the number buttons on the remote

ntr

available in TV mode.

leep Timer

peci

y the amount o

time be

ore your TV

utomatically turns o

Off

-10-...-120 minutes

aption - Adjust

losed

aptioning settings.

aption

ontrol

elect the

losed

aption mode:

Off

n or

n When Mute.

nalog

losed

aption

elect an Analog

aption

ett

ng:

4: Closed captionin

appears in a small

anner across the bottom of the screen. CC1 is usuall

he “printed” version of the audio. CC2~CC4 displa

ontent are provided b

the broadcaster.

1~T

4: Closed captionin

that covers half o

all of the screen. Text1~Text4 displa

content are

provided b

the broadcaster

Off

:To turn o

the Analog

aption.

igital

losed

aption:

elect a Digital

aption setting:

ervice1~

ervice6 or

Off

igital

aption

tyle:

ustomize the look o

digital

losed

aptioning.

aption

tyle:

et the look o

Digital

“

Broadcaster

”

uses broadcaster

’

s style

ont

ize/

tyle/

olor/

pacity:

elect the size

style

color

opacity level o

ont

ack

round Color/Opacit

: Select the color/opacit

level of the background

w C

elect the color of the window.

Net

rk - You can setup the network confi

uration in this

enu. For more information

see “Network Connection” and

“

Network Setu

”.

ode

- Displa

s a banner at the bottom of the screen

which describes the ke

features of the TV.

n Inf

- Displa

the software version information.

ou ma

need to reference this information when contactin

ustomer Care or up

radin

the firmware online.

Reset

- Restores the TV confi

uration to factor

ettin

s. You will need to complete the setup for such thin

s Tuner/Channel settin

s, Network connection, Date/Time

nd other user

references.

Basic Features

Settings

Select Back

Clock, date and timers

settings.

Caption Style

Font Size

Font Style

Font Color

Font Opacity

Background Color

Background Opacity

Window Color

Custom

Large

Style 1

White

Solid

Black

Solid

Black

sing the Settings Men

ou can adjust:

anguage - You can select the menu

’

s language to English,

spaño

rança

enu

ettings - You can set

n-screen menu system.

meout:

elect the display time o

the menu: 10-20-...-

seconds.

ime

etup -

et the time zone, daylight saving, time and

eep t

mer.

one:

elect your local time zone: Eastern Time,

ndiana,

entral Time, Mountain Time, Arizona, Paci

me,

a or

awa

aylight

aving:

et the Daylight

aving time

or your

area

me: You can set time manually or select automatic i

s connecte

to an antenna or ca

e source.

uto

ynchronization

elect

“O

n”

or automatic

ate and time setting using in

ormation

rom broadcast

tat

ons

n your area.

Date

/Tim

:Set the current

ear/month/da

/time.

n Tim

r: When “On”,

ou can set the time

when the TV turns on automaticall

me:

et the desired time

or the TV to turn on

utomat

ower

Off

Timer: When

“O

n”, you can set the time

when the TV turns o

automatically.

et the desired time for the TV to turn of

automaticall

Settings

Select Back

Adjust OSD language.

Language

Menu Settings

Time Setup

Caption

Network

Demo Mode

Version Info

Reset Default

English

Settings

Select Back

Obtain date and time

from broadcaster.

Auto Synchronization

Date

Time

Power On Timer

Time

Power Off Time

Time

2012/01/01

01:01 PM

Off

12:00 AM

Off

12:00 AM

Basic Features

ng t

e Loc

hen

ou first use this function, the default password is

[

0000]. Once

ou input this password,

ou can set options.

ou can ad

ust:

l Bl

k - Block selected Channels on the TV.

rogram Block - Block selected Programs on the TV.

or un

rat

ngs.

. TV Ratings: Restrict TV programs by U

A Ratings.

.S. Movie Ratings: Restrict movie by U

A Ratings.

anadian English/French Ratings:

estr

ct mov

e an

V programs by Canadian Ratings.

pen V-Chip: Display an advanced V-

hip ratings table

or digital channels

(

A only

)

nrate

unrate

programs.

ut Block - Block selected In

ut source on the TV.

hange Password - If you want to change the default

assword, first enter the new

assword then enter the same

assword a

ain.

n All - You can reset all locks to factory mode.

ollowin

is the description of these ratin

.S. Mov

e Rat

ngs

Rat

ng De

ined a

eneral audienc

Parental

uidance suggested

-1

Parents stron

cautione

Res

tri

-17 N

mitt

t au

ence on

Lock

Enter Select Back

Prevent access to TV

services.

Channel Block

Program Block

Input Block

Change Password

Clean All

U.S. TV Rat

Defined as

All

hild

ren

V-Y7

irected to older childre

TV-

eneral audienc

TV-P

arental Guidance suggested

arents

trongly cautioned

TV-MA Mature Audience only

ntent

ine

ll o

the ratings below that rating set blocked

utomat

lly

estive dialo

tron

lan

exual situation

enc

antasy Violenc

Canadian English Ratings

escr

Children

hildren 8 years and olde

eneral Pro

rammin

, suitable

or all audiences

Parents

uidanc

14+

iewers 14

ears and older

rogramm

Cana

ian Frenc

Ratin

atin

escri

tio

enera

ans

eneral; Not recommended

oun

children

3 ans

Pro

rammin

not be suitable

or children

nder the a

e o

ans

Pro

rammin

is not be suitable for children

nder the age of 1

8 ans

rogramm

ng restr

cte

to a

Advanced Features

Network Connection

You can set up your TV so that it can access the Internet through your local area network (LAN) with a Ethernet or wireless

connection.

Connecting to a Wired Network

You can attach your TV to your LAN by one of the three following ways:

You can attach your TV to your LAN by connecting the LAN port on the back of your TV to an external modem using a Cat

5 LAN cable. See the diagram below.

You can attach your TV to your LAN by connecting the LAN port on the back of your TV to an IP Sharer which is

connected to an external modem. Use LAN cable for the connection. See the diagram below.

Depending on how your network is configured, you may be able to attach your TV to your LAN by connecting the LAN

port on the back of your TV directly to a network wall outlet with a Cat 5 cable. See the diagram below. Note that the wall

outlet is attached to a modem or router elsewhere in your house.

If you have a Dynamic Network, you should use an ADSL modem or router that supports Dynamic Host Configuration

Protocol (DHCP). Modems and routers that support DHCP automatically provide the IP address, subnet mask, gateway,

and DNS, so you don’t have to enter them manually. Most home networks are Dynamic Networks.

Some networks require a Static IP address. If your network requires a Static IP address, you must enter the IP address,

subnet mask, gateway, and DNS values manually on your TV’s Cable Setup Screen when you set up the network

connection. To get the IP address, subnet mask, gateway, and DNS values, contact your Internet Service Provider (ISP).

If you have a Windows computer, you can also get these values through your computer.

The Modem Port on the Wall

Modem Cable LAN Cable

LAN Port on TV

External Modem

(ADSL / VDSL / Cable TV)

LAN

The Modem Port on the Wall

Modem Cable LAN Cable LAN Cable

LAN Port on TV

External Modem

(ADSL / VDSL / Cable TV)

IP Sharer (Router)

(with DHCP server)

LAN

The LAN Port on the Wall LAN Port on TV

LAN Cable

LAN

NOTE

You can use ADSL modems that support DHCP if your network requires a Static IP address. ADSL modems that support

DHCP also let you use Static IP addresses.

Advanced Features

etwork Setup (Auto)

se the Automatic Network Setup while

our connectin

the

V to a network that supports DHCP. To set up

our TV’s

able network connection automaticall

, follow these steps:

ow to set up automaticall

onnect

our TV to

our LAN as described in the

revious section.

urn on

our TV, operate accordin

to the description in

he Settin

s menu until the Network screen appears.

n the Network screen, select Confi

uration and press

[

ENTER

]

button to enter the submenu.

et Internet

onnection to

n and Interface to Ethernet.

elect IP Settin

and press [ENTER] button to enter it.

et Address T

pe to Auto.

uto acquires and enters the necessar

connection

alues automaticall

f the connection values are not automaticall

entered,

lease check

our modem and router manuals for

Network Setup (Manual)

Use the Automatic Network Setup when connectin

our TV

to a network that re

uires a Static IP address

ettin

the Network Connection Values

et the network connection values on most windows

uters, follow these ste

ht click the Network icon on the bottom ri

ht of the

n the

-u

menu that a

ears, click Status.

n the dialo

that appears, click the Support tab.

n the Su

ort tab, click the Details button. The network

onnection values are displa

ed.

ow to set up manua

o set up your TV’s network connection manually,

ollow

ese steps:

ollow

teps 1 through 5 in the

“

How to set up

utomatically

”

procedure.

et Address Type to Manual.

UHVV>Ÿ



ź@EXWWRQWRVHOHFW,3$GGUHVVDQGSUHVV>Ż



Ź@

button to move the cursor to the entry

ield. Then press

buttons to enter the numbers.

UHVV>0(18@EXWWRQWRH[LW,3$GGUHVVDQGSUHVV>Ÿ



ź@

utton to se

ect t

e next opt

ons to enter t

e num

ers.

one, press

[MENU]

utton to return to t

rev

ous menu.

elect

onnection Test to check the internet connectivity.

Settings

Select connection type

Internet Connection

Interface

Wireless Setting

Information

IP Setting

Connection Test

Ethernet

Select Back

Settings

Address Type

IP Address

Subnet Mask

Default Gateway

Primary DNS

Secondary DNS

Auto

176. 16. 0. 0

255. 255. 255. 255

172. 16. 0. 0

172. 16. 2. 2

0. 0. 0. 0

Select Back

Settings

Address Type

IP Address

Subnet Mask

Default Gateway

Primary DNS

Secondary DNS

Manual

0. 0. 0. 0

Select Back

Settings

Initiate network

connection

Language

Menu Settings

Time Setup

Caption

Network

Demo Mode

Version Info

Reset Default

English

Enter Select Exit

irections to enable automatic IP addressing by DH

ollow the steps listed to the

ollow to manually

igure the network connection.

Advanced Features

Connecting to a Wireless Network

To connect your TV to your network wirelessly, you need a wireless router or modem. See the illustration below.

Hisense’s built-in Wireless LAN Adapter supports the IEEE 802.11 b/g/n communication protocols. Hisense recommends using

IEEE 802.11n router. When you play the video over a IEEE 802.11b/g connection, the video may not play smoothly.

NOTES

You must use the Hisense’s built-in Wireless LAN Adapter to use a wireless network, the set doesn’t support external USB

network adapter.

To use a wireless network, your TV must be connected to a wireless IP sharer. If the wireless IP sharer supports DHCP, your

TV can use a DHCP or static IP address to connect to the wireless network.

Select a channel for the wireless IP sharer that is not currently being used. If the channel set for the wireless IP sharer is

currently being used by another device nearby, this will result in interference and communication failure.

If you apply a security system other than the systems listed below, it will not work with the TV.

If Pure High-throughput (Greenfield) 802.11N mode is selected and the Encryption type is set to WEP, TKIP or TKIP-

AES (WPS2 Mixed) for your Access Point (AP), Hisense TVs will not support a connection in compliance with new Wi-Fi

certification specifications.

If your AP supports WPS (Wi-Fi Protected Setup), you can connect to the network via PBC (Push Button Configuration) or

PIN (Personal Identification Number). WPS will automatically configure the SSID and WPA key in either mode.

Connection Methods: You can setup the wireless network connection three ways.

-Scan

-Manual

-Auto

Wireless IP Sharer(Router)

(with DHCP Server)

LAN Cable

Wireless LAN Adapter

built-in TV set

The LAN Port on

the Wall

Advanced Features

Wireless Setting

ow to set u

urn on your

, operate accor

ng to t

escr

ettings menu until the Network screen appears.

n the Network screen, select

iguration and press

[ENTER]

utton to enter t

e su

menu.

et Internet

onnection to

n and Inter

ace to Wireless.

elect Wireless

etting and press [ENTER] button to

nter

ou can select:

can

Manual

Auto.

you select

can, a screen will appear listing all o

the

ZLUHOHVVQHWZRUNVZLWKLQUDQJHR

WKH798VHWKH>Ÿ



ź@

eys to se

ect t

e w

ess networ

your router

ID and press [ENTER] to con

irm. Proceed to

tep 7.

you select Manual, a screen will appear prompting

ou to enter the

ID o

your wireless network. Press

[ENTER]

an on-screen

oar

ill

pop up.

nter

ID and select

K. Press [ENTER] to con

irm and

screen w

ill

appear prompt

ng you se

ect t

e secur

RGH

RU\RXUZLUHOHVVQHWZRUN8VHWKH>Ÿ



ź@NH\V

o se

ect t

e proper secur

ty mo

e an

press

[ENTER]

o con

irm. I

you selected None

or the security mode,

roceed to step

screen w

ill

appear prompt

ng you to enter t

assword

or the selected security mode. Press [ENTER]

an on-screen

oar

ill

pop up.

nter t

assword and select

K. Press [ENTER] to con

irm.

roceed to

tep 9.

you select Auto, a screen will appear prompting you to

elect PIN

(

personal identi

ication number

)

or PB

Settings

Setup wireless

connection.

Internet Connection

Interface

Wireless Setting

Information

IP Setting

Connection Test

Wireless

Enter Select Exit

Settings

Initiate network

connection

Language

Menu Settings

Time Setup

Caption

Network

Demo Mode

Version Info

Reset Default

English

Enter Select Exit

DLNA

ettin

Computer, TV and other di

ital devices can be connected

via DLNA and the

can share files with each other. You

can use the TV set as a DLNA DMP

(

ital Media Pla

)

device to en

movies, pictures, music and other multimedia

materials in

our computer throu

h DLNA connection

DLNA Settin

needs to be set on TV and compute

Respectivel

etwork

etup:

Turn on

our TV, operate accordin

to the description in

the Settin

s menu until the Network screen appears

On the Network screen, select Confi

uration and press

[

ENTER

]

button to enter the submenu

et Internet

onnection to

n and Interface to Ethernet

Select IP Settin

and press [ENTER] button to enter it

Set Address T

pe to Auto

uto acquires and enters the necessar

connection

values automaticall

If the connection values are not automaticall

entered,

please check

our modem and router manuals fo

directions to enable automatic IP addressin

DHCP.

Or, follow the steps below to manuall

confi

ure the

Settings

Address Type

IP Address

Subnet Mask

Default Gateway

Primary DNS

Secondary DNS

Auto

176. 16. 0. 0

255. 255. 255. 255

172. 16. 0. 0

172. 16. 2. 2

0. 0. 0. 0

Select Back

(

push button con

iguration

)

setup.

hoose the method

supporte

y your w

ess access po

nt.

you choose PIN, an identi

ication number will appea

on the screen

or you to enter into the access point. A

HQWHULQJWKH3,1SUHVVWKH>Ź@NH\,

WKH3,1LVLQXVH

by another device, select [REFRE

H] to obtain a new

PIN and enter it into the access point. A

ter entering the

3,1

SUHVVW

H





you choose PB

, a screen will appear prompting to

SUHVV>Ź@NH\$

WHUSUHVVLQJWKH>Ź@NH\\RXKDYHWZR

nutes to

ocate an

press t

utton on you

access po

nt to connect to t

TV.

ress t

[MENU]

ey to return to t

e prev

ous menu

10.

elect

onnection Test to check the Internet connectivity

Advanced Features

o set up your

TV’

s networ

connect

on manua

ollow these steps

)

. Follow

teps 1 through 5 in the

“

How to set up

automat

”

proce

ure

)

et Address Type to Manual

et Address Type to Manual, enter IP

etting. Then

press

[

▲

▼

] button to select IP Address and press [

button to move the cursor to the entry

ield. Then press

buttons to enter the numbers

. Press [MENU] button to exit IP Address and press

[

▲

▼

]

utton to se

ect t

e next opt

ons to enter t

e num

ers.

. When done, press [MENU] to return to the previous

men

11.

elect

onnection Test to check the Internet connectivity

Set

DLNA

n the Network screen, select Applications and press

[ENTER]

utton to enter t

e su

menu.

2. Press button to set DLNA to On.

Settings

Set DLNA on or o

DLNA

Netix

VUDU

Select Back

edia Share Settings in Compute

ettings to Share Files

llatsni yam uoy ,ANLD troppus ton seod retupmoc ruoy

tware that supports DLNA such as TVersity or Windows

ayer.

e recommen

ows

ayer as t

nsta

on an

setup

s eas

er.

tart the Windows Media Player 11 or later version.

lick

“

Library” and then

“

Add to Library...”.

“

Add To Library” will pop up on the screen.

lick

“

Add”.

elect a

older and click

K button.

lick

“C

lose” to close the dialog.

lick

“

Library” and move the cursor to select

“

Media

haring...

”

Settings

Address Type

IP Address

Subnet Mask

Default Gateway

Primary DNS

Secondary DNS

Manual

0. 0. 0. 0

Select Back

[

press

[

▲

]

[

ress

▲

]

Advanced Features

Network Function

NOTICE FOR USE

If you use VUDU services, see the following note before

using it.

1. Use of Internet services requires a working broadband

Internet connection (1 to 2 Mbps for SD video, 2.25 to 4.5

Mbps for HD video and 4.5 to 9 Mbps for HDX video).

2. VUDU and other Internet-based services are not provided

by Hisense, may change or be discontinued at any

time and may be subject to restrictions imposed by

your Internet service provider. The quality, functionality,

or availability of such services may be affected by the

capacity of your Internet connection. Use of VUDU video-

on-demand and other Internet services may require the

creation of a separate account through a computer with

internet access.

3. Certain VUDU services may not be available for this TV

model.

4. VUDU video-on-demand and other Internet services may

require payment of one-time and/or recurring charges.

5. You are solely responsible for any charges incurred as a

result of using Internet-based content, including, without

limitation, communications charges for the provision of

Internet or network services and any charges incurred

for third-party Internet content services, such as video on

demand or subscription services. All third-party services

are provided in accordance with whatever terms and

conditions are established between such third-party

providers and you.

6. HISENSE MAKES NO REPRESENTATIONS OR

WARRANTIES ABOUT THE CONTENT, AVAILABILITY

OR FUNCTIONALITY OF THE VUDU SERVICE OR

OTHER INTERNET DELIVERED THIRD-PARTY

SERVICES AND DOES NOT WARRANT THAT ANY

OF THEM WILL BE UNINTERRUPTED, ERROR FREE

OR SATISFACTORY. ANY IMPLIED WARRANTY,

INCLUDING BUT NOT LIMITED TO ANY IMPLIED

WARRANTY OF MERCHANTABILITY OR FITNESS

FOR A PARTICULAR PURPOSE OF ANY THIRD PARTY

CONTENT OR SERVICE, IS EXPRESSLY EXCLUDED

AND DISCLAIMED. UNDER NO CIRCUMSTANCES

WILL HISENSE BE LIABLE IN CONTRACT, TORT OR

UNDER ANY OTHER THEORY FOR ANY DAMAGES

ARISING OUT OF OR IN CONNECTION WITH YOUR

USE OF ANY CONTENT OR SERVICE PROVIDED

BY ANY THIRD PARTY, EVEN IF ADVISED OF THE

POSSIBILITY OF SUCH DAMAGES.

2. Click the box to select “Share my media” and click [OK].

3. An equipment icon will appear on the white area if

the DLNA Settings has been correctly set. Select the

appropriate icon and then click “Allow”.

4. The TV now has access to the shared files on the

computer.

Advanced Features

Operational buttons

Buttons Description

Press to launch VUDU Movies App directly.

Opens the Hi-Smart Hub with links to various

Internet Services.

Press to launch Netflix App directly.

▲/▼/ / Selects the on-screen menu items.

ENTER Confirms selections.

EXIT Closes the menu.

RETURN Returns to the previous menu.

Stops playback and displays the movie title

screen.

Pauses playback. Press the button to return to

playback.

Displays the TrickPlay screen and fast forwards

playback.

Displays the TrickPlay screen and fast reverses

playback.

Plays the next video.

Plays the previous video.

1. Press the [Hi-Smart] button to display Hi-Smart Hub.

2. Press [▲

▲

▲▲

/▼/ / ]buttontoselecttheinterfaceyou

want to view and press [ENTER] to enter the following

description.

No Interface description

1Live TV

2Information

3Apps Market

4My Applications

5Quick Launcher Bar

Enter the Network Applications

▲

VUDU HD Movies

Brief introduction

VUDU is an on-demand service that offers high-definition

movies on Web.

For enjoying more movies, please register and log in to

your account.

Operation instructions

You can access the VUDU HD Movies by the following

method:

1. Press the [Hi-Smart] button to display network main

menu.

2. Press [▲/▼/ / ] button to select the VUDU HD Movies

icon and press [ENTER] to enter it (Refer to “Enter the

network application”), or press [VUDU] button to enter

directly.

3. Select the Sign Up Now icon on the VUDU HD Movies

interface, and press [ENTER] to enter.

TV Input Picture Video Music Network DLNA

DDIISSPPLLAAYY

EEXXIITT

RREETTUURRNN

GGUUIIDDEE

MMEENNUU

HHii--DDMMPP

Hii--Smmaarrtt

AASSPPEECCTT

EENNTTEERR

Hii--Smmaarrtt

Advanced Features

4. Please read the content of the Disclaimer first. If agree,

press [Green] button and then access the network main

menu. If disagree, press [Red] button or [Yellow] button

to cancel or exit Disclaimer menu, then network cannot

be used.

5. Enter your email address to start your VUDU experience.

( Refer to “How to Input the Email Address” )

6. Press button to move the cursor to select

service items in the VUDU HD Movies home page, and

press [ENTER] button to confirm.

7. In the process of watching a movie, press [ENTER] button

to display/exit the tool bar, press [ / ] button to select

the function icon, and press [ENTER] button to confirm.

8. Press [RETURN] button to return the upper menu, or

press [EXIT] button to close the menu.

Tool Bar

1. Press [ENTER] button to enter and press [ / ] button to

select the chapter.

2. Stop playback.

3. Fast backward. Press [ENTER] button to select the

backward speed. You can press [ ] button to achieve

the function.

4. Play/Pause. You can press [ II] button to play/pause

directly when there is no control bar on the screen.

5. Fast forward. Press [ENTER] button to select the forward

speed. You can press [ ] button to achieve the function.

6. Progress bar. The progress bar when playing.

How to Input the Email Address

1. Press [ button to move the cursor to the

address bar and press [ENTER] button to confirm.

0:00:34 0:02:32

Chapters

23451

2. Press [ENTER] button to display the keyboard.

There are some shortcuts on the bottom of the keyboard

so that you can input part of the address often used

directly.

Other keys are used as the keyboard of your computer.

3. Press [ button to move the cursor to the

characters you want to select and then press [ENTER]

button to confirm.

If you want to delete one character, move the cursor to

Back key and press [ENTER] button to confirm.

4. Move the cursor to Done key and press [ENTER] button

to confirm if you have completed the address input. Then

the new address will appear on the address bar.

VUDU HD Movies home page

abcde fghi j k lm

nopq r s t uvwxyz

0123456789@.com

Symbols Space Shift

Enter email address

Back Done

Enter email address

Enter email address to begin enjoying VUDU!

NOTE

TV screen may be difference with picture.

Press for help

Title Function

New The latest movies

Top Picks Mostly picked up movies

Top Rentals Mostly rented movies

New Trailers Latest trailers

Coming Soon The movies can be picked soon

Browse Browse all the movies in VUDU

Collections Browse the classified movies

My VUDU The movies user bought or rented

Search Search movies in VUDU

///]

▲/▼//]

▼

▲▼

▼

▲▼

▼

[///]

Advanced Features

VUDU HD Movies subpage

Title Function

Rent/Own To rent or buy current movie

Watch Trailer To watch trailer of the current movie

2 Minute

Preview

To preview current movie for 2

minutes

Add to Wishlist Add current movie to your wishlist

Rate/share To rate current movie or share it to

your friends in Facebook or Twitter

Overview The overview of current movie

Cast&Crew The cast and crew of current movies

and find their related movies

Reviews The reviews of current movie

Similar The similar types of movies

More Info The detail information of current movie

VUDU Apps

Brief introduction

The applications platform for connected TVs.

VUDU Apps provides customers with access to a wide

range of Internet services and applications including

streaming video, music on demand, photo browsing,

social networking and more.

VUDU Apps supports the development of responsive

apps designed specifically for use on home HD

televisions.

VUDU Apps uses a unique, cloud-based architecture

optimized for consumer electronics devices, including

delivering the latest applications to consumers without

the need for software downloads or frequent firmware

updates.

Operation instructions

You can access the VUDU Apps by the following

methods:

1. Press the [Hi-Smart] button to display network main

menu.

2. Press [ button to select the VUDU Apps icon

and press [ENTER] to enter it.

3. Press [ button to select the widget you want to

access, and press [ENTER] to enter it.

4. You can press [RETURN] to return the upper menu or

press [EXIT] button to close the Widgets display.

VUDU Apps home page

MY FAVORITES

MOST POPULAR

NEWEST

BROWSE BY GENRE

SHOW TICKER

INFO&SETTINGS

Title Function

My favorites The user’s favorite applications

Most popular The most popular applications

Newest The newest applications in VUDU

Browse by

genre Browse applications by genre

Show Ticker Show the applications at the bottom of

screen while watching TV

Info&settings VUDU Apps system information

Netflix

Brief introduction

Instantly watch thousands of TV episodes & movies

streaming over the Internet from Netflix. Unlimited

membership required.

NOTES

TV screen may be difference with picture.

For more information on Netflix visit http://www.netflix.

com/help or login to your Netflix account and click “Help”

at the top of the page.

Your broadband fluency and picture quality depend on

the network speed and original bit rate.

Illustrations are examples and may differ from the actual

Netflix screens. The display and operations may change

as a result of a software update. Use Netflix without

configuring a proxy server. Part or all of Netflix may not

be available when connecting to the Internet via a proxy

server.

[▲/

▲

]

▲/

▲

]

Advanced Features

Operation instructions

1. Press the [Hi-Smart] button to display network main

menu.

2. Press [ button to select the Netflix icon and

press [ENTER] to enter it, or press [NETFLIX] button to

enter Netflix website directly.

3. Input Email and Password in following window to sign in. (

Refer to “How to Input the Email Address” )

4. Press [ button to move the cursor to select

service items in the Netflix home page, and [ENTER]

button to confirm.

5. In the process of watching a movie, press operational

buttons to control the movie.

6. Press [RETURN] button to return the upper menu, or

press [EXIT] button to close the menu.

Netflix Movies home page

Title Function

Suggestions for

you

The movies suggested for you by

Netflix

New Arrivals The new arrivals

Genres Browse movies in different genres

Instant Queue Your list of movies

Search Search for available titles

Opera

The function of the buttons on the remote

control

Operation instructions

How to enter the Opera Browser

The Network setup must be correct. Then you can use

the network.

1. Press the [Hi-Smart] button to display network main

menu.

2. Press [ button to select the opera icon and

press [ENTER] to enter it.

3. Then the default interface will appears on the screen.

There are some function icons on the bottom of the

screen:

The function of the buttons on the screen:

1. Back to main page.

Move the cursor to the icon and press [ENTER] button to

return to the default interface.

2. Back to previous page.

Move the cursor to the icon and press [ENTER] button to

return to the previous viewed web page.

3. Return a page.

Move the cursor to the icon and press [ENTER] button to

go forward to the previous viewed web pages.

Buttons Description

Press these buttons to move the cursor on the

screen as the mouse of the computer.

MENU Press the button to display/cancel the keyboard

on the screen.

ENTER Press the button to confirm the selection. Press

the button twice to search the new website.

213456 910

78 Address bar

▲/

▲

]

▲/

▲

▲/

▲

]

▲/

▲

]

Advanced Features

4. Refresh page.

Move the cursor to the icon and press [ENTER] button to

refresh the current page.

5. Folder.

Move the cursor to the icon and press [ENTER] button to

enter the favorite folder.

6. Add Folder.

Move the cursor to the icon and press [ENTER] button to

add the website to the favorite folder.

7. Help.

Move the cursor to the icon and press [ENTER] button

for help.

8. Address bar.

Input the website you want to view.

9. Sure to enter the Address of the page

Move the cursor to the icon and press [ENTER] button to

search the website.

10. Exit Opera.

Move the cursor to the icon and press [ENTER] button to

close the page.

How to Input the New Address

1. Press 　　　　　　　　　　　button to move the cursor to the

address bar and press [ENTER] button to confirm.

2. Press [MENU] to display the keyboard.

There are some shortcuts on the bottom of the keyboard

so that you can input part of the address often used

directly.

Other keys are used as the keyboard of your

3. eht ot rosruc eht evom ot nottubsserP

characters you want to select and then press [ENTER]

button to confirm.

If you want to delete one character, move the cursor to

Back key and press [ENTER] button to confirm. Or if you

want to re-enter all the characters, move the cursor to

Reset key and press [ENTER]button to confirm.

4. Move the cursor to Enter key and press [ENTER] button

to confirm if you have completed the address input.

Then the new address will appear on the address bar.

5. Move the cursor to the address bar and press [ENTER]

button twice to enter the website.

Or move the cursor to the and press [ENTER] button

to search.

;

[

‘

]

Enter

Space

Tab

Caps L

Shift

http:// www. .com .org .gov .net Reset

3 4 5 6 7 8 9 0 - = Back

NOTE

There is only recommend to open the English website.

[▲

▲

/▼//]

[▲

▲

/▼//]

How to Add a Bookmark

If you want to find the often viewed website from the

favorite folder, you can follow the steps to add it to the

folder.

1. Input the address on the address bar and enter it.

2. 3UHVV>ŸźŻŹ@EXWWRQWRPRYHWKHFXUVRUWRWKH and

press [ENTER] button to confirm.

The menu will pop up on the screen.

3. 3UHVV>ŸźŻŹ@EXWWRQWRPRYHWKHFXUVRUWRWKHLFRQ

marked with dashed box on the right screen. Then press

[ENTER] button to confirm to display all the folders.

4. 3UHVV>Ÿź@EXWWRQWRVHOHFWWKHIROGHU\RXZDQWWRDGG

the bookmark to. And press [ENTER] button to confirm.

5. Move the cursor to the Add button and then press [ENTER]

button to confirm.

If you do not want to add the book mark, move the cursor

to the Cancel button and press [ENTER] button to confirm.

How to Add a Folder

You can add a folder to the favorite as follows:

1. Move the cursor to the icon and press [ENTER] button

to confirm. The menu will pop up on the screen.

2. Move the cursor to Add a folder button and press [ENTER]

button to confirm.

A pop-up menu appears on the screen.

3. Move the cursor to Name bar and press [ENTER] button

to confirm. Follow the steps 2~4 in “How to Input the New

Address” to input the name.

4. Move the cursor to Add button and press [ENTER] button

to confirm and the new folder has been added.

Add a bookmark

Are you sure to add it?

Name:

URL:

Folder:

Add Cancel

HISENSE

Http://www.hisense.com.au/

Root folder

Add a bookmark

Are you sure to add it?

Name:

URL:

Folder:

HISENSE

Http://www.hisense.com.au/

Root folder

Opera Software

GOGI SDK

Opera technology

Advanced Features

How to Edit/Delete a Folder/Bookmark

1. Move the cursor to the icon and press [ENTER] button

to confirm. The menu will pop up on the screen.

2. Move the cursor to the folder /bookmark directly and there

will be two icons on the right of it. Move the cursor to one

of the icons and press [ENTER] button to display a pop-

up menu.

: Edit button.

1).Move the cursor to the Name/URL bar and press

[ENTER] button to confirm. Follow the steps 2~4 in

“How to Input the New Address” to edit it.

2).Move the cursor to Edit button , then press [ENTER] to

confirm and the folder/bookmark will be saved.

: Delete button.

Move the cursor to the Delete button and press [ENTER]

button to confirm. Then the folder/bookmark will be

deleted from the favorite folder.

Add a folder Close bookmark manager

Opera Software

GOGI SDK

Opera technology

HISENSE Name:

Add Cancel

Add a bookmark

Are you sure to add it?

Http://www.hisense.com.au/

Add a folder Close bookmark manager

Opera Software

GOGI SDK

Opera technology

HISENSE

Name: HISENSE

Edit Cancel

Edit this bookmark

Are you sure to edit it?

URL: http://www.hisense.com.au/help/warranty

Http://www.hisense.com.au/

Add a folder Close bookmark manager

Opera Software

GOGI SDK

Opera technology

HISENSE

Name: HISENSE

Delete Cancel

Delete this bookmark

Are you sure to delete it?

URL: http://www.hisense.com.au/help/warranty

Http://www.hisense.com.au/

NOTE

There is only Name bar on the pop-up menu for folder.

How to select the Website from the favorite folder

1. Move the cursor to the icon and press [ENTER] button

to confirm. The menu will pop up on the screen.

2. Move the cursor to the icon before the folder name and

press [ENTER] button to confirm.

The websites in the folder will appear in the following

lines.

3. Move the cursor to the website you want to view and

press [ENTER] button to confirm.

If the website is in the root folder, you can select it

directly . And do not need operate as step 2.

How to exit the manager

Add a folder Close bookmark manager

Opera Software

GOGI SDK

Opera technology

HISENSE

Http://www.hisense.com.au/

Move the cursor to the Close bookmark manager icon

and press [ENTER] button to confirm.

Brief introduction

Watches the video via YouTube.

Operation introduction

1. Press the [Hi-Smart] button to display network main

menu.

2. 3UHVV>ŸźŻŹ@EXWWRQWRVHOHFWWKH<RX7XEHLFRQDQG

press [ENTER] to enter it.

YouTube

eration introduction

ress the [Hi-

mart] button to display network main

men

UHVV>Ÿ



Ź@EXWWRQWRVHOHFWWKH

WKHU$SSVDQG

ress

[ENTER]

to enter

ollow the steps as

ollowing.

Apps

ispla

the applications of downloaded and installed on

oca

UHVV>ŻŹ@WRVHOHFWWKHWLWOHRI0

$SSVDQGSUHVV>ź



NTER

]

to enter it.

UHVV>ŸźŻŹ@WRVHOHFWWKHDSSOLFDWLRQV

RXZDQWWR

nter and

ress

[

Enter

]

to confirm.

ress

[

RETURN

]

to return to the title.

)

3UHVV>Ż



Ź@WRVHOHFWWKHWLWOHR

1HZ$UULYDODQGSUHVV>ź



ENTER]

to enter

Other App

Apps. Your local a

lications

w Arriv

he a

lications of the latest online

ore A

App

lications classification to download

tli

he pop rankin

applications

ana

ement

elete the local a

lications

elf

ervice

w th

rvi

inf

Advanced Features

)

3UHVV>Ÿ



Ź@WRVHOHFWWKHDSSOLFDWLRQV\RXZDQWWR

install and press [ENTER] to con

irm

)

ress

[ENTER]

nsta

e app

cat

ons or press

[RETURN]

to return to t

e new arr

ome page

installed, the application will be shown in My Apps

inter

ace

)

ress

[RETURN]

to return to t

e t

ore A

lassif

the applications b

stor

, knowled

e and funn

ame.

UHVV

ŻŹ

WRVHOHFWWKHWLWOHRI0RUH$

VDQG

UHVV

ź

NTER

]

to enter it.

UHVV

Ÿź

WRVHOHFW WKHFODVVLILFDWLRQDQG

UHVV

[

ENTER

]

to confirm.

)

UHVV>ŸźŻŹ@WRVHOHFWWKHDSSOLFDWLRQV

RXZDQWWR

nstall and

ress

[

ENTER

]

to confirm.

ress

[

ENTER

]

to install the a

lications or

ress

[

RETURN] to return to the More Apps home pa

KNOWLEDGE

FUNNY GAME

Page 1/2

Navy Bat... Tetris Penalty dress-up DICE GUESS NU

Penalty dress-up DICE GUESS NU

Advanced Features

installed, the applications will be shown in My Apps

nter

ace.

st:

UHVV>Ż



Ź@WRVHOHFWWKHWLWOHR

+RWOLVWDQGSUHVV>ź



ENTER]

to enter

UHVV>Ż



Ź@WRSDJHXS



GRZQDQGSUHVV>Ÿ



ź@WRVHOHFW

e app

cat

ons you want to

nsta

press

[ENTER]

irm.

ress

[ENTER]

nsta

e app

cat

ons or press

[RETURN]

to return to t

omepage.

installed, the applications will be shown in My Apps

nter

ace.

ress

[RETURN]

to return to t

e t

ana

ement:

UHVV>ŻŹ@WRVHOHFWWKHWLWOHRI0DQD

HPHQWDQGSUHVV

ź(17(5

WRHQWHULW

UHVV>ŻŹ@WRSD

HXSGRZQDQGSUHVV>Ÿź@WRVHOHFW

he applications

ou want to delete.

ress [ENTER] to displa

the menu.

UHVV

ŻŹ

WRVHOHFW<HV1RDQG

UHVV

(17(5

WR

ress

[

RETURN

]

to return to the title.

Are you sure?

ervice

UHVV>Ż



Ź@WRVHOHFW WKH WLWOHR



HUYLFHDQGSUHVV

[

ENTER] to view the service in

ormation.

custo

: To learn more about VUDU

visit

he frequentl

Asked questions at www.vudu.com/support.

L[FXVWRPHUVHUYLF

(

866

)

716-0414

anada:

(

866

)

348-235

ther Information

Our Promise

Thanks for you and your family choose Hisense Smart TV, we will

continue to provide better and more services.

Service Information

If your TV meet quality problem, please kindly let us know, we will

make every effort to serve you.

Appstore Version

1.0.29.0

Device ID

861003009000006000000150FE1FC402

Penalty 1.0

Hitv Issued In 2012-01-07 1

Dress-up 1.0

Hitv Issued In 2012-01-07 2

DICE 1.0

Hitv Issued In 2011-12-13 3

Guess nu 1.0

Hitv Issued In 2012-01-12 4

Penalty 1.0

Hitv Issued In 2011-12-13 5

Page 1/2

Dress-up 1.1

Valid until:2099-12-31 Size:2.73M

DICE 1.0

Valid until:2099-12-31 Size:5.48M

Guess nu 1.0

Valid until:2099-12-31 Size:5.88M

Penalty 1.0

Valid until:2099-12-31 Size:1.66M

Page 1/2

Advanced Features

ess

[

RED

]

n t

wit

h t

All

r Vi

deo

ress

[

Ÿ

]

to select the video

ou want to vie

ress [ENTER] to pla

the video.

ess

[

/RETURN

]

to exit the video and return to the

ous

rectory

Press [ENTER] button to display/exit the video control

3UHVV>ŻŹ@EXWWRQWRVHOHFWWKHIXQFWLRQLFRQDQGWKHQ

press [ENTER] to confirm

Tool ba

he pro

ress bar when pla

3DXVH<RXFDQSUHVV>Ź,,@GLUHFWO

WRSOD

SDXVH

n th

ntr

n th

the previous video. You can press [

]

directl

chieve the function when no control bar displa

on the

lease note that Hisense will not assume an

responsibilit

or an

lost data and cannot

uarantee perfect compatibilit

with all mass stora

e devices. Be sure to insert the USB

isk or mobile hard disk with standard USB2.0

ort.

ress

[INPUT]

utton to

ay t

INPUT

menu, press

Ÿź@EXWWRQWRKL

KOL

KWWKH+L'03VRXUFHWKHQSUHVV

[

ENTER] button to confirm.

(

ou want to exit Hi-DMP,

ou can press [INPUT] button to switch to other sources

)

ress

[RED]

utton to sw

e me

a type

LOWHU

ress [YELL

BLUE] to turn to the previous

next page.

UHVV>Ÿ



Ź@EXWWRQWRVHOHFWWKH

ROGHU

I

LOH\RXZDQW

o open and then press [ENTER] to enter

play the

older

ile.

ress

[RETURN]

to return to t

e prev

ous

rectory.

Vid

Fil

ou can press [ASPECT] button to chan

e the aspect

ratio

(

Normal, Full Screen, Ori

inal Size

)

while pla

deo

DMP C:

Information

m.mp3

Select Enter Return Type Filter Page up/down

Return F1 F2 F3

P.jpg m.mp3 v.dat t.txt

All

Video

Music

Picture

Book

ay t

e next v

eo.

ou can press

[

]

to ac

eve t

unction when no control bar display on the screen.

ast

war

en press

[ENTER]

to se

ect t

war

spee

ou can press

[

]

to achieve the

Fast forward. Then

ress

[

ENTER

]

to select the forward

eed. You can

ress

[

]

to achieve the

unction.

elect time to play



3UHVV>Ż



Ź@WRVHOHFWWKHSRVLWLRQ\RXZDQWWRVHW



3UHVV>a@WRVHWWKHWLPHDQGSUHVV>Ÿ



Ź@WR

adj

ust

Press [ENTER] to con

irm and the video will to play at

e t

me you

ave set.



3UHVV<HOORZ



%OXHEXWWRQWRSDJHDQGSUHVV>Ÿ



ź@WR

ect t

e v

eo.

Press [ENTER] to con

irm. And press [Exit] to exit the

men

ptions



3UHVV>Ÿ



ź@WRVHOHFWWKHRSWLRQVLQWKHPHQX



3UHVV>Ż



Ź@WRVHOHFWWKHVHWWLQJV

Press [ENTER] to con

irm.

rogram in

llows you to view the program in

ormation.

top playback

Option Set

Repeat

Picture Mode

Subtitle Selection

AUDIO

Once

User

I/I

Select Enter Exit

Pla

able format lis

Playable format

iles Format

deo

Divx 3.11/4.x/5.1/6.0

ess

[

RED

]

n t

wit

h t

All

r M

UHVV

]

to select the music

ou want to vie

ress [ENTER] to pla

the music.

OOWK



VDUH OLVWHGRQWKHOHIW3UHVV

Ÿź

EXWWRQWR

WWK

VRQ

DQG

UHVV

EXWWRQWRPDUNLW<RXFDQ

ress

[

YELLOW/BLUE

]

button to turn to the

revious

ext pa

Press [

REEN] button to select the Mode: Mark

All

ingle

Press [RETURN] to exit the music playback inter

ace.

res

[RED]

utton to sw

All

cture

UHVV

>Ÿ

]

to select the picture

ou want to view.

Advanced Features

Fil

ctu

Current Playing: a3.mp3

a1.mp3

m.mp3

a2.mp3

a3.mp3

01/01

Mode: None

Status: Play

Title: a1

Artist:

Album:

Genre: Other

Year:

Duration:00:04:13

00:00:24/00:04:13

Mode Select Return

Mark Play/PausePage up/down

DMP C:\ music

Information

music

Select Enter Return Type Filter Page up/down

Return F1 F2 F3

a1.mp3 m.mp3 a2.mp3 a3.mp3

All

Video

Music

Picture

Book

DMP C:\ Picture

Information

Picture

jpg

257:383

Select Enter Return Type Filter Page up/down

Return 1.jpg 2.jpg 3.jpg

All

Video

Music

Picture

Book

ress

[ENTER]

rowse t

e p

cture

ress

[

RETURN] to exit the picture and return to the

ous

rectory

When browsin

the picture

Press [ENTER] button to displa

/exit the picture control

EDUDQG

UHVV

ŻŹ

EXWWRQWRVHOHFWWKHIXQFWLRQ LFRQ

and then

ress

[

ENTER

]

button to confirm

Browse the

revious

icture. You can

ress

[

] button

directl

to achieve the function when no control ba

displa

s on the screen

Browse the next

icture. You can

ress

[

]

utton

directly to achieve the

unction when no control ba

ays on t

e screen

llows the picture to rotate

degrees clockwise.

llows the picture to rotate

degrees anti-clockwise

Play

pause. You can press [ENTER] button directly

en no contro

ar on t

e screen

WRSEURZVLQJWKH SLFWXUH<RXFDQSUHVV>Ŷ@EXWWRQ

rect

y w

en no contro

ar on t

e screen

oom

n t

e p

cture.

oom out t

e p

cture.

SWLRQ

HW3UHVV>Ÿ



ź@EXWWRQWRVHOHFWWKHRSWLRQVDQG

SUHVV>Ż



Ź@EXWWRQWRVHWWKHP



peed - Allows you to browse the picture at di

erent

spee

ect - Allows you to set how the picture appears on

e screen

groun

c -

All

ows you to en

oy t

e mus

c w

browsing the pictures i

it is set

10.

Picture in

o. Allows you to view the picture in

ormation.

Option Set

Speed

Effect

Background Music

Fast

None

Off

Enter

III ̰

rowse t

ext

Fil

Advanced Features

ress

[

RED

]

button to switch to All or Book.

UHVV

Ÿ

]

to select the text

ou want to view.

ress

[

ENTER

]

button to confirm.

ress

[

/RETURN

]

to exit the text and return to the

previous director

KHQEURZVLQ

WKHWH[W¿OHV

hen no tool bar appears on the screen,

ou can press

Ÿź

WRPRYHWKHWH[WOLQHVX

GRZQ

UHVV>(17(5@WRGLVSOD

H[LWWKHWRROEDU3UHVV>ŻŹ@

o select the correspondin

icons and then press

[

ENTER

]

to confirm.

top/resume automatic pa

iew the previous pa

iew the next pa

top browsin

llows

ou to select pa

e to view.



3UHVV>a@EXWWRQVWRLQSXWWKHSD

HRUSUHVV>Ÿź@

o ad

ust it.



3UHVV>ŻŹ@ WR VHOHFW (QWHUDQGSUHVV>(17(5@WR

nfirm.

DMP C:\TXT

Information

TXT

Select Enter Return Type Filter Page up/down

Return 1.txt 2.txt t.txt

All

Video

Music

Picture

Book

Goto Page

0000 Enter

1.txt 1/16 Status:Play

Other Information

Trouble Shooting

When something appears wrong with your TV refer to below chart. If the proposed remedy’s do not work , then unplug

the AC cord from wall, wait at least 60 seconds, plug AC back in and then turn on the TV. If the problem still cannot be

solved, please contact the help line provided on the warranty card or a professional technician.

SYMPTOMS POSSIBLE SOLUTIONS

No sound or picture.

Check if the power cord is plugged into AC outlet and if it has electricity.

Check if you have pressed [POWER] button on the TV or [POWER] button on the remote

control.

Check to see if LED light is either red or blue. If illuminated, power to TV is OK.

I have connected an external source

to my TV and I get no picture and/or

sound.

Check for the correct output connection on the external source and for the correct input

connection on the TV.

Make sure you have made the correct selection for the input mode for the incoming signal.

When I turn on my television, there

is a few second delay before the

picture appears. Is this normal?

Yes, this is normal. That is the TV searching for previous setting information and initializing the

TV.

Picture is normal, but no sound. Check the volume settings.

Check if Mute mode is set “on”.

Sound but no picture or black and

white picture.

If black and white picture first unplug TV from AC outlet and re-plug after 60 seconds.

Check Color Setting if picture is black and white.

Sound and picture distorted or

appear wavy.

An electrical appliance may be affecting TV set. Turn off any appliances, if interference goes

away, move appliance farther away from TV.

Insert the power plug of the TV set into another power outlet.

Sound and picture is blurry or cuts

out momentarily.

If using an external antenna, check the direction, position and connection of the antenna.

Adjust the direction of your antenna or reset or fine tune the channel.

Horizontal/vertical stripe on picture

or picture is shaking. Check if there is interfering source nearby, such as appliance or electric tool.

The plastic cabinet makes a “clicking”

type of sound.

“Click” sound can be caused when the room temperature changes. This change causes the

television cabinet to expand or contract, which makes the sound. This is normal and the TV is OK.

Black square appears in the center

of my television screen?

The Closed Caption function is set in the text mode. To remove it, access Closed Caption from

the menu screen and change the Mode setting from text to either CC1 or off .

On some channels getting another

language or sometimes no sound at

all.

That would indicate that the MTS mode on your unit is set to “SAP” mode. We suggest setting

the MTS mode to either “Stereo” or “Mono”. For further instruction, please see “MTS” in your user

manual.

SAP is Second Audio Program. It’s a second audio channel that is usually used for a second

language or descriptive audio for the visually impaired.

MTS stands for Multichannel Television Sound, a standard that allows the encoding of 3

channels of audio within a standard NTSC (analog) video signal to a television. A television that

is able to receive MTS Stereo allows you to watch television with stereo sound.

Not getting all of my cable channels

on the television or I'm only getting

13 channels.

Check the cable connection for an incoming signal. The best way to confirm signal is to use another

TV and/or contact your cable company.

[CH

/ V] don't work when I set the

Channel to Cable? They work with

the Air setting?

After switching to Cable, please auto program the channels. The TV will “remember” all the

channels then the TV will allow you to surf the channels with [CH

/ V] buttons.

Other Information

SYMPTOMS POSSIBLE SOLUTIONS

Remote control does not work.

Confirm that TV still has power and is operational.

Change the batteries in the remote control.

Check if the batteries are correctly installed.

If using a universal remote, be sure to select the TV mode on the remote.

If the remote still does not work:

-remove and reinstall the batteries correctly to reset the remote or install new batteries.

-press TV and then Power to turn on the TV. With a universal remote if you have reset or

changed the batteries you will need to reprogram the remote for the other units.

Network connection fail.

Check network physical connection, make sure connection is correct.

Enter “Menu”,”Settings”,”Network”,”Configuration” , make sure configuration is correct according

to your network service provider.

Enter “Menu”, “Settings”, “Network”, “Configuration”, “Connection Test” to make sure that

network connection test is successful.

Connect VUDU/Netflix fail.

Check network connection is correct, both physically and configuration.

Enter “Menu”, “Settings”, “Network”, “Configuration”, “Connection Test” to make sure that

network connection test is successful.

For VUDU: Enter “Menu”, “Settings”, “Network”, “Configuration”, “Applications”, “VUDU”,

“Deactivation” to reset VUDU account.

For Netflix: Enter “Menu”, “Settings”, “Network”, “Configuration”, “Applications”, “Netflix”,

“Deactivation” to reset Netflix account.

Log out VUDU/Netflix or change log

in account.

For VUDU:

1. Press [EXIT] button on remote to exit VUDU.

2. Enter “Menu”, “Settings”, “Network”, “Configuration”, “Applications”, “VUDU”, “Deactivation”

to reset VUDU account.

For Netflix:

1. Press [EXIT] button on remote to exit VUDU.

2. Enter “Menu”, “Settings”, “Network”, “Configuration”, “Applications”, “Netflix”, “Deactivation”

to reset Netflix account.

DLNA does not work.

Check network connection is correct, both physically and configuration.

Make sure DLNA server (PC or Mac) has shared media content and TV has permission to

access shared media.

Enter “Menu”, “Settings”, “Network”, “Applications”, turn on “DLNA”.

Select Hi-DMP source to find shared contents. Select “Hi-DMP” source by using [INPUT] button

on remote or press [Hi-Smart] button and then select “Multi-Media” Icon.

How do I get the Hi-Smart Hub to

work on my TV?

You need a broadband (high speed) Internet service with a speed of no less than 1.5 Mbps.

Connect the TV to the Internet through your router by an ethernet cable or wireless connection.

If the connection fails, check with your internet service provider or router manufacturer to

determine if there is a firewall, content filter, or proxy settings that may block the TV from

accessing the Internet.

After connecting the TV to the Internet, press the [Hi-Smart] button on the remote to access the

Hi-Smart Hub.

Caution: Do not try to repair the TV yourself. Refer all servicing to qualified repair personnel.

Other Information

General

NOTE

Features, appearance and specifications are subject to change without notice.

Model Name 42K316DW 46K316DW 50K316DW

Dimension

Without

Stand (986×600×58 mm)

38.8×23.6×2.3 in. 42×25.6×2.3 in.

(1075×649.5×59.5 mm)

45×27×2.2 in.

(1150×688×56 mm)

With

Stand

38.8×25.9×9.8 in.

(986×657×250 mm)

42×27.9×9.8 in.

(1075×708×250 mm)

45×29×11 in.

(1150×745×285 mm)

Weight

Without

Stand 34 lbs. (15.5 kg) 45 lbs. (20.5 kg) 46.2 lbs. (21 kg)

With

Stand 39.7 lbs. (18 kg) 50.7 lbs. (23 kg) 53 lbs. (24 kg)

LCD Panel Minimum size

(diagonal) 42 inches 46 inches 50 inches

Screen resolution 1920 × 1080 1920 × 1080 1920 × 1080

Audio power 8 W + 8 W 8 W + 8 W 10 W + 10W

Power consumption Please refer to the rating label.

Power supply AC 120 V ~ 60 Hz

Receiving

systems

Analog NTSC

Digital NTSC / ATSC / QAM

Environmental conditions

Temperature: 41°F ~ 95°F (5°C~ 35°C)

Humidity: 20%-80% RH

Atmospheric pressure: 86 kPa - 106 kPa

Component Input 480 I / 60 Hz, 480 P / 60 Hz, 720 P / 60 Hz, 1080 I / 60 Hz, 1080 P / 60 Hz

VGA Input VGA (640×480 / 60 Hz), SVGA (800×600 / 60 Hz), XGA (1024×768 / 60 Hz)

HDMI Input RGB / 60 Hz (640×480, 800×600, 1024×768)

The remote control requires:

Number of Batteries: 2

Type: AAA

YUV / 60 Hz (480 I, 480 P, 720 P, 1080 I, 1080 P)

Hisense Electric LCDF0006 LCD Monitor User Manual

Hisense Electric Co., Ltd. LCD Monitor

W9HLCDF0006_User Manual

Navigation menu

Namespaces

Views

Navigation