Hisense Electric LCDF0027 Part15 Subpart B-LED LCD TV User Manual ES G132903

Hisense Electric Co., Ltd. Part15 Subpart B-LED LCD TV ES G132903

W9HLCDF0027_User Manual 1

Download: Hisense Electric LCDF0027 Part15 Subpart B-LED LCD TV User Manual ES G132903
Mirror Download [FCC.gov]Hisense Electric LCDF0027 Part15 Subpart B-LED LCD TV User Manual ES G132903
Document ID2062384
Application ID+7zbxpHSGn7ZT9A3tFr7Rg==
Document DescriptionW9HLCDF0027_User Manual 1
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize376.18kB (4702241 bits)
Date Submitted2013-09-05 00:00:00
Date Available2013-09-06 00:00:00
Creation Date2013-08-27 15:43:18
Producing SoftwareCorel PDF Engine Version 9.397
Document Lastmod2013-08-27 15:43:29
Document TitleES-G132903Ó¢ÎÄ
Document CreatorCorelDRAW Version 9.397
Document Author: ΢ÈíÓû§

CHILD SAFETY.
it Makes A Ditterence How and Where
You Use Your Hot Panel Dispioy
Congratulations on your purchase! As you enioy your new product, please
keep these safety tips in mind:
THE ISSUE
- The home tneater ente'tuinment experience '5 a grawwg trend and targer
ttat panet disptays are poputar purchases However, ttat panet disptays
are not atways supportea on the proper stands or instatted accoraing to the
rncnuiocture"s recommendations
- Ftat panet disptays that (re inopprop'oteiy situated on dressers, bookcases,
sheives, desks, speakers, chests or Carts may toii over and cause iniury
THIS MANUFACTURER CARES!
- The consumer cioctronics industry is comrriitco to making name entertainment
onioyobia and safe
TUNE INTO SAFETY
- One size does NOT Iit att Fettow the monuiacture"s recommendotions
io' 'be sate instoiiat on and use ot your Hat panet aisptay
- Coreiuiiy read one understand att encioseo instructions ier proper use 0:
this product
Don’t attaw chitdren ta ctitnb an or ptay With Furniture and tetev sion sets
Don’t ptace ttat patiet aisptays on turmture that can easity be used as steps,
such as a chest at drawers
Remember ’iiot chitdren can become excited wnite watching a program,
especioiiy on e ”iorger then ire" tiet ponei dispioy Core shoutd be taken *0
pioce or irstoii the dispioy whe'e t cannot be pusbeo, puiied over,
or knocked down
Core shautd be taken to route ott cards and cabtes connected to the Hat
ponei dispioy so that they cannot be puiied or grobbeo by Curious eiiidren
WALL MOUNTING: IF YOU DECIDE T0 WALL MOUNT
YOUR FLAT PANEL DISPLAY, ALWAYS:
I Use a mount that has been recommendeo by the dispioy rnonutocturer
and/or iisted by on independent ioboratoiy [such 05 UL, CSA, ETL)
0 Foiiow oii HS’tUCItOHS suopiiod by tho dispioy and wait niount monutocturars
0 ti you have any doubts about your ooiiiry to soteiy instoii your Hot oonei
disptay, cantactyoui retaiter about protessioiiat r‘istaiio’ioii ‘ CEA
- Make sure that the walt where you are mounting ’iie disptay is appropriate (,twtkrmehmmt
Some watt mounts are not designed to be mounted to watts wti s'eei www.(E.org/suIety
studs 0' otd cinder btack construction it you are unsure, contact a
pretessienei instaiier
- A mtttmun or two peopie are required ter tiistciic‘ton, riet ponei dispiays
can be heavy
Important tructions
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTIONITO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR
BACK) NO USER’SERVICEAELE PARTS
INSIDE REFER SERVICING To QUALIFIED
SERVICE PERSONNEL
\lmmwaA
. Read these Instructions.
Keep these Instructions
Heed all warnings
. Follow all instructions.
Do not use this apparatus near water
Clean only with dry cloth
Do not block any ventilation openings. Install in accordance
with the manufacturer's Instructions
Do not install hear any heat sources such as radiators,
heat registers, stoves, or other apparatus (Including
amplifiers) that produce heat
Do not defeat the safety purpose of the polarized or
groundingrtype plug A polarized plug has two blades with
one wider than the other. A grounding type plug has two
blades and a third grounding prong The WIde blade or the
mud prong are provided for your safety If the provided
plug does not fit into your outlet. consult an electrician for
replacement of the obsolete outlet
10 Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the
point where they exit from the apparatus
11. Only use attachments/accessories specified by the
manufacturer.
12 Use only WIth cart, stand, tripod,
bracket, or table specified by the
manufacturer, or sold WIth the
apparatus When a cart is used,
use caution when moving the cart/ ‘
apparatus combination to avoid Injury SMZSA
from tiprover
13 Unplug this apparatus during lightning storms or when
unused for long perIods of time.
14. Refer all servicing to qualified service personnel.
SerVIcing is required when the apparatus has been
damaged in any way, such as powerrsupply cord or plug
is damaged, liquid has been spilled or objects have fallen
into the apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or has been
dropped.
15. Apparatus should not be exposed to dripping or
splashing, and objects tilled WIth liquids, such as vases,
should not be placed on the apparatus.
16.
17.
18
19.
20.
21.
The lightning flash with arrowhead symbol, within an
equilateral triangle Is intended to alert the user to the
presence of uninsulated dangerous voltage within the
product's enclosure that may be of sufficient magnitude
to constitute a risk of electric shock.
The exclamation point Within an equilateral triangle is
intended to alert the user to the presence of Important
operating and maintenance (servicing) instructions in
the literature accompanying the appliance.
Ari outside antenna system should not be located in the
Vicinity of overhead power lines or other electric lIght or
power circuits, or where It can fall Into such power lines
or cIrcuIts. When installing an outside antenna system,
extreme care should be taken to keep from touching
such power lines or circuits, as contact with them might
be fatal.
Do not overload wall outlets and extension cords, as this
can result In a risk of fire or electric shock.
Do not push objects through any openings in this unIt,
as they may touch dangerous voltage points or short out
parts that could result in fire or electric shock. Never spill
rwaI p a» AN lPNVAGROUNmNG AS m lHP
NATIONAL ELECYRICAL canE
ANTENNA
" LEAD IN WIRE
GROUND
CLAMP
ANTENNA
DISCHARGE uNIr
INEc SECTION mum
GROUNDING coNoucrofis
iNEc sEorIoN 8107211
LECTRIC SERVICE
EQUIPMEVT . "W7
gfggggwm w
52““ (NEcAmzan, wAm Hl
or spray any type oI liquid into the unIt.
It an outside antenna or cable system Is connected to the
unit, be sure the antenna or cable system is grounded to
provide some protection against voltage surges and built-
up static charges, Section 810 of the National Electrical
Code, ANSI/NFPA 70, provides Information With respect
to proper grounding of the mast and supporting structure,
grounding of the lead-In Wire to an antenna discharge
unIt, size of grounding conductors, location of antenna
discharge unit, connection to grounding electrodes, and
requirements for the grounding electrode.
When replacement parts are required. be sure the service
technician uses replacement parts specified by the
manufacturer or those that have the same characteristics
as the original part. Unauthorized substitutions may result
in fire, electric shock or other hazards.
Upon completion of any service or repairs to this unit,
ask the service technician to perform safety checks to
determine that the unit is in proper operating condition.
Important rstructro
22. When you connect the product to other equipment, turn
off the power and unplug all of the equipment from the
wall outlet. Failure to do so may cause an electric shock
and serious personal injury. Read the owner's manual of
the other equipment carefully and follow the instructions
when making any connections.
Sudden high volume sound may cause hearing or
speaker damage. When you use headphones, (if the unit
is equipped with a headphone jack) keep the volume at a
moderate level. If you use headphones continuously with
high volume sound, it may cause hearing damage.
CONDENSATION:
Moisture Will form in the operating section of the unit if the
unit is brought from cool surroundings into a warm room or
it the temperature of the room rises suddenly. When this
happens, unit's performance will be impaired. To prevent
this, let the unit stand in its new surroundings for about an
hour before sWitching it on, or make sure that the room
temperature rises gradually.
23.
Condensation may also form during the summer if the unit is
exposed to the breeze from an air conditioner. In such cases.
change the location of the unit.
HOW TO HANDLE THE LCD PANEL:
F Do not press hard or iolt the LCD panel It may cause the
LCD panel glass to break and injury may occur.
F If the LCD panel is broken, make absolutely sure that you
do not touch the liquid in the panel. This may cause skin
inflammation.
If the liquid gets in your mouth. immediately gargle and
consult with your doctor. Also. it the liquid gets in youreyes
or touches your skin, consult with your doctor afler rinsing
for at least 15 minutes or longer in clean water
Possible Adverse Effects on LCD Panel:
If a fixed (nonrmoving) pattern remains on the LCD Panel
for long periods of time, the image can become permanently
engrained in the LCD Panel and cause subtle but permanent
ghost images This type of damage is NOT COVERED BY
YOUR WARRANTY. Never leave your LCD Panel on for long
periods of time while it is displaying the following formats or
images-
" Fixed Images, such as stock tickers. Video game patterns,
TV station logos, and websites.
C Special Formats that do not use the entire screen For
example, Viewmg letterbox style (16-9) media on a normal
(4:3) display (black bars at top and bottom of screen); or
viewing normal style (4-3) media on a widescreen (16-9)
display (black bars on left and right sides of screen)
The following symptoms are not signs of malfunction
but technical limitation. Therefore we disclaim any
responsiblllty for these symptoms.
" LCD Panels are manufactured using an extremely high
level of precision technology, however sometimes parts
of the screen may be missing picture elements or have
luminous spots.
This is not a sign ofa malfunction.
" Do not install the LCD Panel nearelectronic equipment that
produces electromagnetic waves. Some equipment placed
too near this unit may cause interference.
" Effect on infrared deVices - There may be interference
while using infrared devices such as infrared cordless
headphones.
Declaration of Conformity
This device complies With part 15 of the FCC Rules.
Operation is subject to the followrng two conditions:
(1) This device may not cause harmful interference and (2)
This device must accept any interference received, including
interference that may cause undesired operation.
End of life directives
Your TV also contains material that can be recycled and
reused. For disposal or recycling information, contact your
local authorities or the Electronic Industries Alliance at http://
www.eia.org, the Electronic Products Recycling Association
at http:l/www.eprassociation.ca (for Canada) in your area.
Non-active pixels
The LCD panel contains almost 3 million thin film transistors.
which provide exceptionally sharp video quality. Occasionally,
a few non-active pixels may appear on the screen as a
fixed black (in the case of a dead pixel), blue, green. or red
point. These non-active pixels do not adversely affect the
performance of your TV. and are not considered defects.
Power source
TO USE AC POWER
1. The power cord is attached to the TV at the factory.
2 Connect the AC cord into an AC outlet
@WARNING
Do not connect this unit to the power using any device
other than the supplied AC cord. This could cause fire.
electrical shock. or damage.
Do not use with a voltage other than the power voltage
specified This could cause fire, electrical shock, or
damage
Q CAU110N
When this unit is not used for a long time. (e.g., away on
a trip) in the interest of safety, be sure to unplug it from
the AC outlet
Do not plug/unplug the AC cord when your hands are
wet. This may cause electrical shock.
Notices de portantes
MISE EN GARDE
RISQUE DE CHOC ELECTRIQUE
NE PAS OUVRIR
AfiENTIoN: AFIN DE REDUlRE LE RisoUE DE CHOC
ELECTRiOUE, NE PAS ENLEVER LE CoquRCLE (ou
LE Dos). CET APPAREiL NE CONTlENTAUCUNE
PlECE REPARABLE PAR L‘uTiLisATEuR. FAlRE APPEL
A uN TECHNlClEN auALiFiE.
. Lisez les instructions.
Conservez les instructions
. Respectez tous les avertissements.
. Suivez toutes les directives.
.N‘utilisez pas cel appareil pres de l‘eau.
. Ne le nettoyez qu'avec un linge sec
. Ne bloquez pas les évents Effectuez l‘installation
conformement aux directives du fabricant.
Ne |'insla||eZ pas pres d'une source de chaleur Somme un
radialeur, un registre, une cuisiniere ou autre (y compris
un amplificateur) produisant de la chaieur.
. N‘enlevez pas le dispositif de sécurité de la fiche polarisée
cu avec mise a la terre. Une fiche polarisee compone
deux lamelles dont une est plus large que l'autre. Une
fiche avec mise a la terre comporte deux iamelies et une
broche de terre La lamelle large el la broche de terre sont
fournies pour votre securite'. Si la fiche ne convient pas a
la prise de courant, consultez un electriCien etfaites
rernplacer la prise de couranl.
0. Placez le cordon d'alimentation de racon 3 ca qu'il ne scit
pas ecrase ou pince surlout au niveau de la fiche, des
prises et au point de sortie de l'appareil
1. N‘utilisez que des pe’riphe'riques/ accessoires specifies
par le fabricant.
2 Ne l'utiliseZ qu'avec un chariot,
un trepied, un support ou une
table specifiee par Ie fabricant
ou vendue avec l'appareil. Si
vous utilisez un chariot, soyez
prudent quand vous le deplacez
afin d‘eviter que l’ensemble
chariot/televiseur culbule.
3. Debranchez l'appareil lors d'un orage e’lectrique ou s'il
n'est pas utilise pendant une periode prolongée
4. Confiez le service a une personne qualifiee Un service
est requis Si l'appareil est endommage d'une faccn
quelconque (cordon d'alirnenlation ou fiche
endommage’e, liquide renverse ou objet echappe dans
l'appareil. appareil expose a la pluie ou a l'hurnidite',
mauvais fonctionnement ou appareil echappe).
5 L'appareil ne devrait pas etre expose aux éclaboussures
Ne placeziamais d'obieis remplis cie liquide (cornme un
vase) sur I'appareil.
6. Une antenne exterieure ne devrait pas etre siiuee a
proximite des iignes haute tension, d'un eclairage
53‘i 25A
17.
18
19.
20.
21.
L‘eclair avec symbole de ileche dans un triangle
equilateral avise l'utilisaieur de la presence d'une
tension dangereuse non isolée dans le boiier du produit
et qui peui elre d'intensité suflisante pour presenter un
risque de choc électrique.
Le point d'exciamation dans un triangle equilateral
avise l'utilisateur de la presence de directives
d‘utilisation et d'entretien (service) importantes dans la
documentation qui accompagne l'appareii.
electrique ou d'autres circuits electriques. ni l‘a oi] elle
pourraii s'ecraser contre des lignes ou circuits
eleclriques. Lors de l’installaiion d‘une antenne
exterieure, i| taut prendre les mesures necessaires pour
eviter de toucner les lignes ou circuits electriques car un
tel contact pourrait étre mortel.
Ne surchargez pas les prises murales ni les rallonges car
cela presente un risque d‘incendie ou de choc electrique.
N'insérez aucun objet dans les ouvertures de l'appareil
car vous pourriez toucher un point de tension
dangereuse ou courtsmrcuiter une piece resultant en un
incendie ou un choc electrique. Ne renversez nine
pulverisez aucun liquide dans l'appareil.
EXEMJLE as Miss A LA ’ERRE a ANYENNE SELDN LE
cool: NATiONAL us L‘ELEEYRiCiYE
,.. :iLDANYENNE
COLUERS as MiSE
A LA rERRE
Wirs ns amines
a ANTENNE
icMs SEETlON m 20)
; CoNDUchuRs 3; mass
(cME sscriuN mm
mass as
SEcrEuRs»
. COLUERS as Miss A mrszws
~WSYSYEME u ELEchoDE os MiSE A
LA rERRE Du SECYEUR
(CNEARY m PARHE Hi
cons NATlDNAL DE
L‘ELECTRiCITE
szasan
Si une antenne ou un sysleme de cable exte'rieur est
branche a i'appareii. assurezsvous que I'antenne ou ie
systeme est relie a la terre afin de proteger contre la
surtension ou les decharges electrostatiques. La section
810 du Code national de l'électrici ,ANSI/NFPA 70.
renseigne sur la mise a la terre appropriee du mat et de
la structure de soutien. la miss a la terre du fil conducteur
'a une unite' de de'charge d'antenne, la taille des
conducieurs de terre, i‘emplacement de i'unite de
de'charge d'antenne. la connexion aux electrodes de terre
et les exigences concernant l'eiectrode de terre.
Sides pieces de rechange sont requises. assurez-vous
que ie technicien n'utilise que les pieces specifiees par ie
fabricant Du ayant les memes caracterisliques que les
pieces originales. Toute substitution non autorisee peut
presenter un risque d'incendie, de Choc électrique ou
autre.
Une iois l'entretien ou la reparation terminée, demandez
au technicien d’effeciuer une verification de securiié afin
d'etablir si i'appareii fonctionne correctement
t ces de 3 portantes
22. Si vous connectez le produit a un autre appareil,
eteignelee et debranchelee de la pnse de courant.
Autrement vous risquez un Choc électrique ou des
blessures graves. Lisez le manuel de l'utilisateur de
l‘aulre appareil et suivez les directives de connexion
23. Uri son soudain d’intensite’ elevée peut endommager
l‘oui'e ou les haut-parleurs. Si vous utilisez des ecouteurs
(appareil dote' d‘une prise d‘ecouteurs), tenez l'intensite
sonore a un niveau moyen. L'utilisation continue
d'eccuteurs a intensité sonore élevee peul endommager
l‘oui'e.
CONDENSATION:
De l'humidite peut se former dans la partie tonctionnelle de
l'appareil si celui-ci passe d'un endroit trais a un endroit
chaud ou Sl la temperature de la piece s'eleve subitement.
Dans pareil cas. le rendement de I'appareil peut diminuer
Four éViter une telle situation. laissez l‘appareil s'ajuster au
niveau milieu pendant une heure environ avant de le mettre
en circuit Encore. assurez-vous que la temperature de la
piece s’eleve graduellement.
Une condensation peut aussi se former en ete si l‘appareil
est expose au courant d'air d‘un climatiseur. Dans pareil cas,
changez I'emplacement de I'appareil.
MANIPULATION DU PANNEAU ACL:
F N'appuyez pas fort sur l‘ACL et ne le secouez pas. Vous
risoueriez de briser le verre de I’ACL et de vous blesser.
F Si l‘ACL est brisé, assurez-vous de ne pas toucher le
liquide dans le panneau. Le liouide peut irriter la peau.
Si vous avalez du liquide, gargarisez-vous immediatement
et ccnsultez un medecin. Si Ie liquide entre en contact
avec les yeux DU la peau, rinceZ-les pendant au "wins 15
minutes a l'eau Claire et consultez un médecin.
Effets nocifs possibles de l’écran ACL:
Si un motit fixe reste a l'ecran pendant une longue duree.
l'image peut devenir impregnee en permanence sur l’ecran
ACL et former one image fantome subtile mais permanente
Ce type de dcmmage n'esi PAS COUVERT PAR LA
GARANTlE. Ne laissez jamais l'écran ACL allume pendant
une longue duree quand il affiche des images des types
suivants:
P images tixes comme les resullats de la Bourse, les motifs
de ieu video, les logos de stations de television et les sites
Web;
" les formats speciaux qui ne couvrent pas l‘e'cran entier
(format boite aux lettres [16'9] sur écran normal [4'3]
(barres noires dans le haul et le bas) ou vue normale [4:3]
sur grand écran [16:9] (barres noires sur la gauche et la
droite))
Les signes suivants ne proviennent pas d’un mauvais
fonctionnement mais d'une Iimite technique. Nous ne
pouvcns donc pas étre tenus responsables de lels
signes.
" Les ecrans ACL sont labriqués avec un niveau
extremement e'leve de precision mais certaines parties de
l’ecran peuvent ne pas avoir d’elémenls d'image ou
presenter des points lumineux
ll ne s'agit pas d’un mauvais fonctionnement
P N'installez pas I'ecran ACL pres d'un equipement
électronique qui génére des ondes électromagriétiques car
cela pourrait causer une interference.
" Efiet sur les appareils a inirarouge , il peuty avoir
interlerence quand on utilise un appareil a infrarouges
comme un telephone sans fil a infrarouges.
Enoncé de foncormite'
Cet appareil est conforme a la section 15 des reglements de
la FCC Le fonctionnement est régi par deux conditions ' (1)
l'appareil ne peut pas causer d'interlerence nuisible et (2)
l’appareil doit acceptertoute interle’rence recue. y compris
une interference qui peut entrainer un ionotionnement
indesirable.
Directives de fin de vie
Votre televiseur contient des materiaux qui peuvent etre
recycles et reutilise's. Pour l'e'limination ou le recyclage,
contactez les autorite’s locales ou |' Association du Recyclage
des Produits Electronic au htlp://www.eprassociation.ca pour
trouver un centre de recyclage clans votre region
Pixels inac es
L ecran ACL comple pres de 3 millions de transistors en
couches minces iournissant une qualite d'image
extremement e'leve'e. A l‘occasion, des pixels inactifs
peuvent apparaitre a l'ecran sous forme de point fixe noir
(pixel mort), bleu. vert ou rouge. Ces pixels inactifs ne
nuiserit pas au rendement de Votre téléviseur et ne sont pas
considére’s un vice.
Alimentation électrique
SECTEUR
1. Le oordon d'alimentalion est branche au televiseur a l'usine.
2. Branchez le cordon dans une prise de courant
@AVERTISSEMENT
Ne branchez pas l'appareil a l'aide d'un dispositil autre
que le cordon tourni car cela présenterait un risque
d‘incendie. de choc électrique ou de dommage
N‘utilisez pas une tension autre que celle specifiee pour
l’appareil car cela presenterait un risque d'incendie, de
cnoc electrique ou de dommage
(D MISE EN GARDE
Pour des raisons de sécurite’. debranchez l‘appareil de la
prise de courant si vous prevoyez ne pas l’utiliser
pendant une periode prolongee (ex :voyage).
Ne brancheydebrancnez pas le cordon d'alimentation si
vous avez les mains mouillees car cela pourrait
provoquer un choc électrique
po Safety Instructions
When Installing the TV Against a Wall or Enclosed Area
Make sure that your TV has adequate air circulation. Allow enough space around the TV as shown below. Avoid operating the
TV at temperatures below Inadequate air 41°F (5“0).
Install with stand Install on the wall
4 India:
110qu
A Inches
2 as n
(mm) ‘"‘ ‘5 4 inches
(Saul um)
E «mes
‘W (10cm)
'._| $ 0— 4 50— Leave at least Ihis much
' IIIIIIIII I ,,,,,,,,,,,,,, s pace around the set.
Leave at least this much
space around the set 1132'???
Never install the TV set as follows:
Air circulation is blocked
Inadequate air circulation can lead to overheating of the TV and
ma cause dama e to our TV or cause a fire.
VI
Legal Not ces
FCC Statement —
Where the MAINS plug or an appliance coupler is used
NOTE: as the disconnect device, the disconnect device shall
This equipment has been tested and found to comply with remain readily operable.
the limits for a class B digital Device, pursuant to part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates. uses and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio Communications. However, there is
no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by
tuming the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following
measures:
o Reorient or relocate the receiving antenna.
0 Increase the separation between the equipment and the
receiver.
0 Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
I Consult the dealer or an experienced radio/TV technician
for help.
The manufacturer is not responsible for any radio or TV
interference caused by unauthorized modifications to
this equipment. Such modifications could void the user's
authority.
This TV incorporates High-Definition Multimedia Interface (HDMIW) technology. H D ml '-
HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC‘
Hisense and associated logos where applicable are registered trademarks of Hisense Group in the United States and/or other
countries. All other trademarks are property of their respective owners. 2011 Hisense USA, Corporation. All Rights Reserved. O,
Manufactured under license from Dolby Digital Laboratories Dolby Digital and the double-D symbol are trademarks of Dolby ‘ ‘
Digital Laboratories. I v
' Specifications subject to change without notice, _
This TV has an Auto Shut Off feature that will automatically turn off the TV if there is no video signals detected within 15 minutes.
Additionally this TV has LED backlighling which has greater energy saving benefits versus conventional CCFL type TV.
VII
—||
Installing Batteries in the Remote Control ................................... 2
Making Connections ........................................................................................ 3
Turning Your TV On or Off ...........
Turning the TV for the First Time.
Selecting the Input Source
Changing Channels I Volume
Shortcuts Instructions ...........
To Use the Menu ............
Using the Picture Menu ..
Using the Audio Menu .......
Using the Channels Menu.
Using the Settings Menu
Using the Parental Controls Menu ................
Digital Media Players
Enjoy Movie Files .
Browse the Photos ..
Playable Format List ....................................................................................... 15
Trouble Shooting ........................................................................................ 16

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Author                          : ΢ÈíÓû§
Create Date                     : 2013:08:27 15:43:18+08:00
Modify Date                     : 2013:08:27 15:43:29+08:00
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Metadata Date                   : 2013:08:27 15:43:29+08:00
Creator Tool                    : CorelDRAW Version 9.397
Format                          : application/pdf
Title                           : ES-G132903Ó¢ÎÄ
Creator                         : ΢ÈíÓû§
Document ID                     : uuid:302a76e0-54be-4f69-9ec0-54a33fc79c97
Instance ID                     : uuid:7fc6c3b7-2204-4df3-9e8d-9a2c73573a03
Producer                        : Corel PDF Engine Version 9.397
Page Count                      : 8
EXIF Metadata provided by EXIF.tools
FCC ID Filing: W9HLCDF0027

Navigation menu