Hisense Electric LCDF0081 Part15 Subpart B-LED LCD TV User Manual W9HLCDF0081 2
Hisense Electric Co., Ltd. Part15 Subpart B-LED LCD TV W9HLCDF0081 2
Contents
- 1. W9HLCDF0081_User Manual 1
- 2. W9HLCDF0081_User Manual 2
- 3. W9HLCDF0081_User Manual 3
W9HLCDF0081_User Manual 2
ES-G1612C8-1 Model LC-50N3100U Quick Start Guide Help SHARP improve the environment by reducing paper waste. For detailed instructions and feature descriptions, access the full User Manual online. © 2016 Hisense Company Ltd. All Rights Reserved. All material in this Quick Start Guide is the property of Hisense Company Ltd. and its subsidiaries, and is protected under US and International copyright and/or other intellectual property laws. Reproduction or transmission of the materials, in whole or in part, in any manner, electronic, print, or otherwise, without the prior written consent of Hisense Company Ltd., is a violation of Hisense Company Ltd. rights under the aforementioned laws. No part of this publication may be stored, reproduced, transmitted or distributed, in whole or in part, in any manner, electronic or otherwise, whether or not for a charge or other or no consideration, without the prior written permission of Hisense Company Ltd. Requests for permission to store, reproduce, transmit or distribute materials may be made in writing to the following address: USA: Hisense USA Corporation PO Box 3289 Suwanee, GA 30024 CANADA: Hisense Canada Co., Ltd, 405 Britannia Rd E., Suite 11 Mississauga, Ontario,L4Z 3E6 MEXICO: Hisense Mexico S de RL de CV Boulevard Miguel de Cervantes Saavedra No. 301, Torre Norte, Piso 2, Colonia Ampliación Granada, C.P. 11520, en México Distrito Federal. “Sharp™”, “Aquos™”, “Quattron™” and any and all other Sharp product names, logo’s, slogans or marks are registered trademarks owned exclusively by Sharp Corporation. "Hisense™", and any and all other Hisense product names, logo’s, slogans or marks are registered trademarks and intellectual property rights of Hisense Company Ltd. and its subsidiaries. This product is sold to you under one or more license agreements between Sharp Corporation and Hisense International (Hong Kong) America Investment Co. Ltd. All other trademarks are the property of their respective holders. Enjoy TV in a Super Simple and Super Unique Way! LED TV with Popular Features Multiple Connection Methods • LED backlight that offers better brightness and contrast • 1 Digital Audio Out port • Energy-efficient design to reduce your utility bill • 1 USB Connector • HiMedia Digital Media Player to play back digital content from your USB drive • 2 HDMI Connectors • 1080p picture resolution • Component ports • RF Antenna connector • Composite ports • 1 Headphone jack • 1 DVI Audio In port High-Quality Picture and Sound Easy Setup Menu and Simple Design • Vibrant contrast and brightness to display images accurately • Short and easy-to-follow first-time setup menu • Crisp sound and powerful TV speaker output • Simple user interface (UI) design to navigate the TV screens • 1080p full high definition (FHD) resolution • Descriptive features to help make your selections Register Your TV! Congratulations on the purchase of your new SHARP TV! This Quick Start Guide will walk you through a few easy steps to set up your TV. For detailed instructions, access the User Manual on the support pages listed below. Because we value your business, we want to keep you in the know of 'all things SHARP'. Using your mobile phone, scan the Registration page QR code to register your TV. Depending on the make and model of your phone, you may need to download a QR code scanning app. Country U.S.A CANADA MEXICO Customer Care Center • Phone: 1-888-935-8880 • Hours of Operation: Monday - Friday: 9 AM to 9 PM EST Saturday - Sunday: 9 AM to 6 PM EST • Service Email: support@sharptvusa.com SHARP Support Page http:// www.sharptvusa.com /support • Phone: 1-855-271-6271 • Hours of Operation: Monday - Friday: 8 AM to 8 PM EST • Service Email: Canadasupport@sharp-canada.ca • Phone: 01-800-999-7277 • Hours of Operation: Monday-Friday 9:00-18:00 • Service Email: servicio@SHARPTV.com.mx http://www.sharp-canada. ca/support/ http://www.SHARPTV.com. mx/support/ REGISTER YOUR TV www.sharptvusa.com/ support/productreg.asp No need to register http://www.SHARPTV. com.mx/support/product Reg.asp Disclaimer: This Quick Start Guide is intended as a general guideline to help you set up your SHARP TV. Images throughout this document are for illustrative purposes only and may differ from the actual product. Packaged contents Your package in which you purchased your new TV contains the following items: TV A left and right leg that forms the TV stand Remote Control 2 AAA batteries A/C power cord Quick Start Guide (this document) Important Safety Information and Warranty Card leaflet 4 screws (M4×20) IMPORTANT: To prevent accidentally discarding items that came with your TV, be sure to check ALL of the foam in the carton box. · Please check foam for accessories before discarding. · Veuillez vérifier la mousse pour qu'il n'y ait pas d'accessoires avant de la jeter. · Antes de desechar la espuma, asegúrese de retirar todos los accesorios. Required tools and devices Phillips screwdriver (not included) to secure the TV stand HDMI and other types of cables (not included) to connect external devices to the TV Wall mount bracket (not included) if you prefer to mount the TV to the wall BUTTONS AND PORTS ON THE TV Back View of the TV AUDIO OUT ANT/CABLE IN DIGITAL OUTPUT (Optical) TV Side View TV Bottom View AUDIO HDMI 1/ARC HDMI 2 DVI AUDIO IN Power Input STEP 1. Attach the TV stand or wall mount bracket (not included) Attach the TV Stand (For steps to attach the wall mount see page 6) CAUTION: Be sure to disconnect the A/C power cord before installing a stand or Wall-Mount brackets. The LED display is very fragile and must be protected at all times when installing the legs that form the stand. Be sure to protect the TV screen from getting scratched or damaged by any hard objects. In addition, DO NOT exert pressure on the front of the TV at any time because it could crack. To attach the left and right leg that forms the stand: 1. Carefully place your TV face down on a soft, flat surface to prevent damage to the TV or scratching to the screen. 2. Remove the 2 legs from the foam and then insert the stands into the bottom slots of the TV. 3. Use the screws that came inside the carton with your TV to secure each leg tightly. leg Screws: M4X20 Screws: M4X20 leg Attach the Wall Mount Bracket (not included) • To prevent internal damage to the TV and ensure it is mounted securely, be sure to use fixing screws (not provided) that are 9.5 - 11.5 mm in length when measured from the attaching surface of rear cover. Before you begin the third-party manufacturer instructions, be sure to do the following things: 1. Place the TV face down on a clean, safe and cushioned surface. 2. Remove the TV stand if you already attached it. 9.5 - 11.5 mm 3. Place the spacers (not included) in the corresponding bracket holes. Rear cover of the TV Screw (not provided) Wall mount bracket Screw Spacer Wall mount hole pattern VESA (mm) 200 × 400 Wall mount screw size (mm) M6 × 25 Follow instructions provided with the Wall mount bracket. To complete the installation, please contact the wall-mount manufacturer. Spacer (not provided) The selected screws are 9.5 - 11.5 mm in length when measured from the attaching surface of the rear cover. The length of the screws differ depending on the Wall mount bracket model. Bracket (not provided) NOTE: The length of the screws differ depending on the wall mount bracket model. CAUTION: • When you attach the mount, be sure to use the spacers (provided by the third-party manufacturer) between the TV and the bracket. STEP 2. Connect devices to your TV Check to ensure that you have selected the right cables for the ports and that they are connected securely. Loose connections can affect the quality of the picture image and color. TV label Port Cable External Equipment Brief Description VHF/UHF Antenna ANT/CABLE IN Connect an outdoor VHF/UHF antenna. ANT OUT Antenna Connect a High Definition Multimedia Interface (HDMI) cable from an external device. HDMI COMPONENT IN VCR PB Blue PR Red VIDEO AV IN Green White Connect a component video cable and left-right audio cables from an external AV device. DVD Player/Recorder Video Camera Set-top Box Red Satellite antenna cable Satellite Receiver Yellow Connect a composite video cable and left-right audio cables from an external AV device. White Red HDMI Connect a HDMI cable from your PC to use the TV as a monitor. Connect an audio cable from the PC audio out. PC IN DVI AUDIO IN PC TV label Port Cable External Equipment Brief Description Connect an optical cable from an external digital audio system. DIGITAL OUTPUT Audio Amplifier Speaker Connect headphones to hear audio from the TV. / AUDIO OUT Connect an audio adapter (not provided) from an external analog audio system. White Red Speaker Audio Amplifier Connect a USB device for browsing photos and movies. The unit only recognizes a USB Memory Stick. USB DC 5V 0.5A(MAX) Buttons on your TV remote Infrared transmitter Power on/off INPUT Select TV / AV / USB source Select picture mode Select component source Select sound mode Zoom button Select HDMI source Set the sleep timer Display current time Adjust closed caption mode Select input source TIME MENU button FAV.CH ▲/▼/◄/► Move Up/Down/Left/Right or adjust settings Audio select button Mono/Stereo/SAP operation Media content control function buttons Display favorite list Confirm selections Display the information banner MUTE button Next channel Close the menu Increase volume Decrease volume Previous channel Display the channel name Direct channel selection Dash button Select a digital sub-channel Go to the previous channel Media content control function buttons GUIDE Not available STEP 3. Begin using your remote Remote Control Range Information 1. Slide the back cover to open the battery compartment of the remote control. Gently push and slide Insert the batteries The remote control can work at a distance of up to 26 feet in front of the TV set. It can work at a 30 degree horizontal or vertical angle. Program Your Universal Cable or Satellite Remote Control to Operate Your New SHARP Television (only for USA) Gently push and slide If you would like to program your other household remote controls to your new SHARP television,please refer to the User's Manual supplied by your Cable or Satellite provider. The Cable or Satellite providers' User's Manuals should include instructions on how to program their remote to your television. 2. Insert two AAA size batteries. Make sure to match the (+) and (-) ends of the batteries with the (+) and ( - ) ends indicated in the battery compartment. 3. Replace the battery compartment cover. Important Information about the remote and batteries: • Discard batteries in a designated disposal area. Do not throw them into a fire. • Remove old batteries immediately to prevent them from leaking into the battery compartment. • If you do not intend to use the remote control for a long time, remove the batteries. • Battery chemicals can cause a rash. If the batteries leak, clean the battery compartment with a cloth. If chemicals touch your skin then wash it immediately. • Do not mix old and new batteries. • Do not mix alkaline, standard (carbon-zinc) or rechargeable (NiCd, NiMH, etc.) batteries. • Do not continue using the remote if it gets warm or hot. Call our Support Center immediately on the SHARP support website. A list of SHARP codes for the most common Cable and Satellite providers are listed below. Use the SHARP code that is associated with your Cable or Satellite provider (if applicable). DIRECTV......0178, 10178, 10019, 10748, 11314, 11660, 11710, 11780, 12049, 10171, 11204, 11326, 11517, 11564, 11641, 11963, 12002, 12183 Time Warner Cable......386, 0178, 10178, 400, 450, 461, 456, 0748, 1463, 0463, 10463 Comcast......0178, 10178, 10463, 11463, 10748, 11314, 11660, 10171, 11204, 11326, 11517, 11641, 11780, 11785, 11892, 11963, 12002 Cox Communications......0178, 10178, 1326, 1463 Dish Network......505, 627, 538, 720, 659 If the SHARP code associated with your Cable or Satellite provider is not listed, does not work or you cannot locate the instructions to program your remote, call your local Cable or Satellite provider's customer service center. 10 STEP 4. Power on the TV If your Cable or Satellite provider does not have a SHARP code available, please contact us at one of the phone numbers on Page 2. Plug one end of the power cord into the AC INPUT connector on the back of your TV and the other end into a power outlet. Using Your Cable Set-top Box or Satellite Receiver Remote as a ‘Universal’ Remote If you prefer to use your Cable Set-top Box or Satellite Receiver Remote as a ‘Universal Remote’, then visit the Support page of the SHARP USA website to view a list of the codes. Power Cord Wall Outlet Press the Power button on the remote to turn on the TV. A splash screen that shows the SHARP logo appears. Next, the First-Time Setup Menu begins by prompting you to choose your Language, Country, and Time Zone. 11 STEP 5. Complete the first-time setup menu STEP 6. Selecting the Input Source After the splash screen that shows the SHARP logo appears, begin the first-time setup menu. When you finish the first-time setup menu, you must select the TV signal source. Because your TV stores this information, you do not need to change the TV signal source unless it changes. For example, if you begin receiving channels from a cable provider instead of an antenna, then you'll need to change the TV signal source. Choose Your Menu Language English Français Español ENTER Enter Select MENU Return EXIT Turn on your TV, then press INPUT button on the remote or on the TV. The INPUT menu opens. Exit Set menu language to English, Français,or Español Menu Operations Language setting • Choose your language: English, Español or Français and then press the ENTER button to confirm. Press ▲/▼ button to highlight the input source, then press ENTER button. TV TV AV Component HDMI1 HDMI2 USB VGA Media Select ENTER Enter EXIT Exit Disclaimer: Subscriptions or other payments may be required to access content through some applications. Some or all of the included or downloaded application services in this Sharp, Aquos or Quattron device may not function depending on the Internet connection, local limitations of included applications or other reasons outside of the Licensor's or Manufacturers control. ALL LICENSORS AND THE MANUFACTURER EXPRESSLY DISCLAIM RESPONSIBILITY FOR ANY APPLICATION SERVICE FROM FUNCTIONING AT ANY TIME, FOR CONTENT IN ANY APPLICATION SERVICE, FOR DISRUPTIONS OF SERVICE, LOCAL OR REGIONAL LIMITATIONS, WARRANTIES OF TITLE, NO INFRINGEMENT, AND FOR IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. By purchasing this device, you accept such Disclaimer without any claim on any Licensor and/or the Manufacturer at any time and in any territory. Time zone • Select the local time zone according to your region. If setting Auto selected, the options of Daylight Savings/Year/ Month/Day/Time are not available. • Daylight Saving: Set the Daylight Savings time for your area. Use Mode • Select your Mode Setting: Home Mode or Retail Mode. • Home Mode is the recommended setting which offers full functionality of the television. If you selected Retail Mode, a message appears “Are you sure you want retail mode?" Select "Yes" to continue, or select "No" to change your selection. Channel Search Source INPUT • Select the Tuner Mode: Antenna or Cable and then press the [Enter] button to confirm. • Your TV will begin to display channels that are available for your area. 12 PRODUCT SPECIFICATIONS Model Name LC-50N3100U Dimension (W × H × D) Without Stand 44.1 × 25.5 × 3.1 inches (1119 × 648 × 80 mm) With Stand 44.1 × 27.5 × 9.6 inches (1119 × 698 × 245 mm) Without Stand 26.5 lbs (12 kg) With Stand 28.2 lbs (12.8 kg) Weight Active Screen Size (Diagonal) 49.5 inches Screen Resolution 1920 × 1080 Audio Power 10 W + 10 W Power consumption 110 W Power Supply 120 V ~ 60 Hz Receiving systems Analog NTSC Digital ATSC / QAM Receiving Channels VHF: 2~13 UHF: 14~69 CATV: 1 ~ 125 Digital cable (64/256 QAM): 1 ~ 135 Tuner Type Frequency synthesized Environmental Conditions Temperature: 41°F ~ 95°F (5°C ~ 35°C) Component Input 480 I / 60 Hz, 480 P / 60 Hz, 720 P / 60 Hz, 1080 I / 60 Hz, 1080 P / 60 Hz HDMI Input RGB / 60 Hz (640×480, 800×600, 1024×768), YUV / 60 Hz (480 I, 480 P, 720 P, 1080 I, 1080 P) Ports 2 HDMI ports, 1 USB port, 1 RF input, 1 RCA composite combine with component Video input, 1 left/right Audio input for composite, 1 Digital Audio output,1 Earphone Audio output, 1 DVI Audio input Key features LED Backlight, Digital Media Player, 1080P, Narrow Frame 13 Digital Terrestrial Broadcast (8VSB): 2 ~ 69 Humidity: 20% ~ 80% RH Atmospheric pressure: 86 kPa ~ 106 kPa QUICK PROBLEM-SOLVING TIPS When you experience an issue with your TV, turn it off and on again. If this does not resolve the problem, then refer to the tips below. If the problem is still not resolved, then contact us at one of the phone numbers on Page 2. ISSUES POSSIBLE SOLUTIONS • Check if the power cord is plugged into a powered AC outlet. No sound or picture • Press the Power button on the remote control to activate the unit from 'Standby' mode. • Check to see if the LED light is on or not. If it is, then the TV is receiving power. I have connected an external source to my TV and I get no picture and/or sound. • Check for the correct output connection on the external source and for the correct input connection on the TV. • Make sure you have made the correct selection for the input mode for the incoming signal. When I turn on my TV, there is a delay for a few seconds before the picture appears. Is this normal? • Yes, this is normal. The TV is initializing and searching for previous setting information. The picture is normal but there is no sound • Check the volume settings. • Check if 'Mute' mode is set to On. Sound but no picture or black and white picture • If the picture is black and white, unplug the TV from the AC outlet and replug it after 60 seconds. • Check that the Color is set to 50 or higher. • Try different TV channels. The sound and/or picture is distorted or appears wavy • An electric appliance may be affecting the TV. Turn off any appliances that are nearby and move it farther away from the TV. • Insert the power plug of the TV set into another power outlet. The sound and picture is blurry or cuts out • If using an external antenna, check the direction, position and connection of the antenna. • Adjust the direction of your antenna or reset or fine tune the channel. A horizontal or vertical stripe appears on the picture and/or the picture is shaking • Check if there is an appliance or electric tool nearby that is causing interference. 14 The plastic cabinet makes a "clicking" type of sound • The 'click' sound can occur when the temperature of the television changes. This change causes the television cabinet to expand or contract, which makes the sound. This is normal and the TV is OK. The remote control does not work • Confirm that TV still has power and is operational. • Change the batteries in the remote control. • Check if the batteries are correctly installed. Need more help? Additional help is available online at support links on Page 2. You will find answers to frequently asked questions, downloadable firmware and more. 15 Certification and Compliance The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. FCC Notice This device has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This device generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. ©2016. All rights reserved. SHARP and the SHARP logo are registered trademarks of SHARP. Other brand and product names are registered trademarks of their respective owners. However, there is no guarantee that interference will not occur in a particular installation. If this device does cause harmful interference to radio or television reception, which can be determined by turning the device off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the device and receiver. Connect the device into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment. 16
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.7 Linearized : No Page Count : 19 Has XFA : No XMP Toolkit : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03 Create Date : 2016:03:21 09:46:03+08:00 Metadata Date : 2016:03:21 09:47+08:00 Modify Date : 2016:04:10 21:11:07+08:00 Creator Tool : Adobe InDesign CS6 (Macintosh) Instance ID : uuid:5106e680-932c-6e41-a6b4-a0c6df7a6460 Original Document ID : xmp.did:2E025DAB6B1AE1118638882CBCDE8A8A Document ID : xmp.id:0980117407206811822A863139E7A1F3 Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:0880117407206811822A863139E7A1F3 Derived From Document ID : xmp.did:0880117407206811822A863139E7A1F3 Derived From Original Document ID: xmp.did:2E025DAB6B1AE1118638882CBCDE8A8A Derived From Rendition Class : default History Action : converted History Parameters : from application/x-indesign to application/pdf History Software Agent : Adobe InDesign CS6 (Macintosh) History Changed : / History When : 2016:03:21 09:46:03+08:00 Format : application/pdf Producer : Adobe PDF Library 10.0.1 Trapped : False Creator : Adobe InDesign CS6 (Macintosh)EXIF Metadata provided by EXIF.tools