Hisense AEH-W4B1 WiFi Module User Manual Part 2

Download:
Mirror Download [FCC.gov]
Document ID	3120150
Application ID	VMdGxmY8TEPP5t+/wDnVaw==
Document Description	User Manual Part 2
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	36.34kB (454241 bits)
Date Submitted	2016-09-01 00:00:00
Date Available	2017-02-27 00:00:00
Creation Date	2016-08-26 08:47:14
Producing Software	Corel PDF Engine Version 15.0.0.486
Document Lastmod	2016-08-26 08:47:14
Document Title	备份WIFI使用指南 - 0825改
Document Creator	CorelDRAW X5
Document Author:	peng xu

WiFi module performance parameters
Hi-Smart Air
Wi-Fi Instruction
Model
AEH-W4B1
Transmission frequency
2.4GHz
Transmission power
≤19dBm
Power supply
5V / 450mA
Operating temperature
0°C~40°C
Operating humidity
20%~85%RH
Smart-phone configuration
IMPORTANT:
This equipment should be installed
and operated with minimum distance 50 cm between the radiator and
your body.
For ease of operation, please read
these instructions carefully before
operation and properly keep it.
Terminal device
Android
IOS
System
requirements
Android 4.4 or
later versions
IOS 8 or later
versions
Resolution
800*480 and
above
960*640 and
above
APP download method
1.Please make sure that smart-phone has been connected to
the Internet before downloading the APP.
2.For Android smart-phone users, open PLAY Store and enter
Hi- Smart Air in the Search bar to find the latest version.
Download and install it.
3.For IOS smart-phone users, open APP Store and enter HiSmart Air in the Search bar to find the latest version.
Download and install it.
This equipment complies with FCC radiation exposure
limits set forth for an uncontrolled environment and it also
complies with Part 15 of FCC RF Rules.
CAUTION:
To comply with the limits of the Class B digital device,
pursuant to Part 15 of the FCC Rules, this device is comply
with Class B limits. All peripherals must be shielded and
grounded. Operation with non-certified peripherals or
non-shielded cables may results in interference to radio or
reception.
MODIFICATION:
To assure continued compliance, Any changes or
modifications not expressly approved by the grantee of
this device could void the user’s authority to operate the
device.
Label Statement
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2.This device must accept any interference received,
including interference that may cause undesired operation.
Le présent appareil est conforme aux CNR
d’Industrie Canada applicables aux appareils radio
exempts de licence. L’exploitation est autorisée
aux deux conditions suivantes :
(1) l’appareil ne doit pas produire de brouillage, et
(2) l’utilisateur de l’appareil doit accepter tout
brouillage radioélectrique subi, même si le brouillage
est susceptible d’en compromettre le fonctionnement.
：
NOTE
To satisfy FCC exterior labeling requirements, the
following text must be placed on the exterior of the end
product.“ Contains Transmitter module FCC ID:
2AGCCAEH-W4B1” .
To satisfy IESD exterior labeling requirements, the
following text must be placed on the exterior of the end
product.“Contains Transmitter module IC: 20778AEHW4B1”.
IC Statement
This device complies with Industry Canada licence-exempt
RSS standard(s).Operation is subject to the following two
conditions:
1.This device may not cause interference, and
2.This device must accept any interference, including
interference that may cause undesired operation of the
device.
4.Users may also scan the QR code for corresponding
operating system as shown below to download the APP.
QR code area
Method for registration and login
1.Before registration, please ensure that home wireless
network can be connected with Internet. After downloading
the APP, install it according to the prompting information.
After installation, click the Hi-smart Air icon to enter the APP.
Follow the prompting information in the APP to complete the
account registration process. After registration and first
login, click the Menu icon
on the top right corner and
choose Setting > Help to read the Help document.
2.Return to the Home page and click "+" on the bottom right
corner to add a new appliance.
If you are using this product for the first time, please click
the Guide button on the top right corner on the page for
adding a new appliance. Follow the prompting information
to complete the registration of the household appliance
in the home wireless network environment.
3.After registration of the household appliance, users can
control the appliance in the list of appliances.
This APP may be used for various appliances. Users may
click the appliance to be controlled to enter the control
screen for control operations.
4.To ensure the reliability of the Wi-Fi module, please use
the router certified by Wi-Fi Alliance. Certified router has
the logo of below on the package or the user manual.
FCC Statement
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15 of
the FCC rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions may cause
harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a
particular installation.
If this equipment does cause harmful interference to radio
or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and
receiver.
• Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician
for help.
Radiation Exposure Statement

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Profile CMM Type                : Lino
Profile Version                 : 2.1.0
Profile Class                   : Display Device Profile
Color Space Data                : RGB
Profile Connection Space        : XYZ
Profile Date Time               : 1998:02:09 06:49:00
Profile File Signature          : acsp
Primary Platform                : Microsoft Corporation
CMM Flags                       : Not Embedded, Independent
Device Manufacturer             : IEC
Device Model                    : sRGB
Device Attributes               : Reflective, Glossy, Positive, Color
Rendering Intent                : Perceptual
Connection Space Illuminant     : 0.9642 1 0.82491
Profile Creator                 : HP
Profile ID                      : 0
Profile Copyright               : Copyright (c) 1998 Hewlett-Packard Company
Profile Description             : sRGB IEC61966-2.1
Media White Point               : 0.95045 1 1.08905
Media Black Point               : 0 0 0
Red Matrix Column               : 0.43607 0.22249 0.01392
Green Matrix Column             : 0.38515 0.71687 0.09708
Blue Matrix Column              : 0.14307 0.06061 0.7141
Device Mfg Desc                 : IEC http://www.iec.ch
Device Model Desc               : IEC 61966-2.1 Default RGB colour space - sRGB
Viewing Cond Desc               : Reference Viewing Condition in IEC61966-2.1
Viewing Cond Illuminant         : 19.6445 20.3718 16.8089
Viewing Cond Surround           : 3.92889 4.07439 3.36179
Viewing Cond Illuminant Type    : D50
Luminance                       : 76.03647 80 87.12462
Measurement Observer            : CIE 1931
Measurement Backing             : 0 0 0
Measurement Geometry            : Unknown
Measurement Flare               : 0.999%
Measurement Illuminant          : D65
Technology                      : Cathode Ray Tube Display
Red Tone Reproduction Curve     : (Binary data 2060 bytes, use -b option to extract)
Green Tone Reproduction Curve   : (Binary data 2060 bytes, use -b option to extract)
Blue Tone Reproduction Curve    : (Binary data 2060 bytes, use -b option to extract)
Page Count                      : 1
Create Date                     : 2016:08:26 08:47:14+08:00
Modify Date                     : 2016:08:26 08:47:14+08:00
Producer                        : Corel PDF Engine Version 15.0.0.486
Author                          : peng xu
Creator                         : CorelDRAW X5
Title                           : 备份WIFI使用指南 - 0825改

EXIF Metadata provided by EXIF.tools